Hi, I have a sprint LS980, but it seems that ANY rom that I try that is not stock based, whether it's lollipop or marshmallow, CM12, CM13, Blisspop, CrDroid, Resurrection Remix, I can never seem to get encryption working, which is a big deal for me. Every time I start encryption with these roms, no progress bar is ever shown, all I get is the boot animation and the phone does nothing unless I hard reset. Obviously, when I hard reset the phone boots and works normally, but is not encrypted.
My question is, has ANYONE managed to get encryption working on a non-stock rom on a Sprint LG G2?
Worked for me on RR (12.1) and CM13 without a problem at all. Have a D802
Related
Hi. I'm having wifi issues with my Nexus. It started after flashing MIUI. I was using TWRP to flash, it took a while for the google logo to disappear and to get to the Xiaomi bootlogo. After it finally booted, the wifi was stuck to "turning on", but never ultimately firing up(couldn't get it to turn on nor off, even having turning it off). I've also noticed that I have the same EXACT issue with CyanogenMod. I completely returned to stock, i've relocked the bootloader and everything. I tried CM installer today and i'm rooted again with CM, but still I have the same exact issues as before. I don't have these issues with some other roms such as stock, official Omnirom and such, i wouldn't think it would be exactly a hardware issue, since it works just fine with certain roms. Would anyone have an idea why my phone is having this issue? It wasn't always this way. Specifically, I haven't been having issues with 4.4 roms. Does anyone think it could be something related to bootloader, or something?
Juanito216 said:
Hi. I'm having wifi issues with my Nexus. It started after flashing MIUI. I was using TWRP to flash, it took a while for the google logo to disappear and to get to the Xiaomi bootlogo. After it finally booted, the wifi was stuck to "turning on", but never ultimately firing up(couldn't get it to turn on nor off, even having turning it off). I've also noticed that I have the same EXACT issue with CyanogenMod. I completely returned to stock, i've relocked the bootloader and everything. I tried CM installer today and i'm rooted again with CM, but still I have the same exact issues as before. I don't have these issues with some other roms such as stock, official Omnirom and such, i wouldn't think it would be exactly a hardware issue, since it works just fine with certain roms. Would anyone have an idea why my phone is having this issue? It wasn't always this way. Specifically, I haven't been having issues with 4.4 roms. Does anyone think it could be something related to bootloader, or something?
Click to expand...
Click to collapse
i have a similar problem... i rooted my nexus and flashed a custom rom (PACman) when it boots wifi is disabled, also bluetooth doesnt work neither any sounds, no music, no speaker, nothing, so i flashed Paranoid android (both based on 4.3) and i had the same problem
so then i flashed stock, everything ok, then CrDroid (based en 4.4) everything ok, then OmniRom (Based on 4.4) everything ok too...
i posted it here and got no replies, hope someone could help
Yes, right now I'm running an unofficial CM 11, and no issues. I wonder if something needs to be downgraded, in order for things to be okay again. I would still like the option to be able to run 4.2/4.3 based roms. Maybe I could try flashing to stock 4.2 or 4.3, then reroot, and test my results
Sent from my Nexus 4 using Tapatalk
What radio/baseband version are you using?
Hi, I'm using AOKP last nightly builds and since 2013-10-18 Wi-Fi started to stuck, settings ui errors and other problems. So I just tried franko kernel with official AOKP releases and Wi-Fi now is working fine. But i've faced skype problems). After 4 minutes it hangs and i need to restart my phone.
After updating my zenfone 5 (intel 2.0GHz) to android Marshmallow screen locks and unlocks randomly when it's laying in landscape or horisontal position(if I handle it with any angle it also does, but less frequently)
I have no idea what to do. I have tried unofficial CM13.1 and Resurection Remix and it's the same(I made clean flash of course). Dirty unicorns doesn't boot at all, so I have no chance to check it.
Maybe I should flash any speciffic firmware to use marshmallow without problems but I have no idea wchich one... (Is there any step-by-step manual of moving to MM and flashing these ROMs? I'm not sure but i think I have used this one)
The second problem but a bit smaller is that I can't connect to the cellular data internet but i'd focus one the first one.
Here's the video:
https://www.youtube.com/watch?v=qEAg6K3z0OE
If I enable any screen lock I just can't use the phone
Before Marshmallow update(on stock ROM, but unlocked) there was everything ok.
It also doesn't locks on TWRP, only on system
thats came from bootloaderunlock you can use cm 13.1 kernel and enable dnxfix for this second dirtyunicorn is booting when you came from cm based roms you must make a fullwipe then dirty is aosp thanks
Thanks
Ok, I flashed CM13.1 boot img. It's the same. I also tried to reflash whole CM from here: http://forum.xda-developers.com/zenfone-5/development/cyanogenmod-13-t3382702 and it doesn't work.
The phone still locks and unlocks its screen :/
I made full wipe of course...
"dnxfix" - do you mean "dnfix" wchich is mentioned in cyanogen's thread? Ok, I'll try it. And slockfix. It looks promising
Have the same problem here. The problem goes away on airplane mode though.
Hello,
I have posted this on the cyanogenmod forum but everyone seems to be on holiday as I'm getting no replies. I'm hoping someone on here can help.
I recently had CM12.1 running on my S5 SM-G900F for about six months with no problems. I then switched over to CM13 and used that for about a month without any problems.
I decided to go back to CM12.1, I flashed the same CM12.1 Snapshot file that I had been using previously and it installed without error but when I rebooted the phone it would crash and reboot in a loop during start up. I wiped the phone and tried the install again about four or five times having the same problem until on the final attempt it managed to load the OS. Now that I have the OS running I cant connect to WIFI, the 'back' and 'recent apps' buttons on the phone don't respond (the home button does work), the camera app doesn't work (I get the error 'Can connect to Camera') and it keeps crashing and restarting on reboot. Everything else seems to work but the phone seems sluggish and there may be other errors that I haven't come across yet.
I thought that there may be a problem with the zip file I was flashing so I downloaded it again but it did the same thing. I've tried wiping and reinstalling several times but I get the exact same problems. The file I'm flashing is:
cm-12.1-20151007-SNAPSHOT-YOG4PAO333-klte.zip
If I go back to CM13 everything works fine so the problem is only with CM12.1.
I'm at a lost to explain why this keeps happening as I've had this running fine on my phone previously and wiping the phone and starting again doesn't do anything to solve the problem.
Any ideas please?
Come on people! Have a guess, I'm really stuck here!
I myself have not installed any custom roms on my s5 yet (bc of knox 0x0 lol) but try reverting back to the stock rom and then install cm12.1 again, maybe it could work.
Thanks, but I've tried that. Both stock rom and CM13 work without a problem. The issue only seems to be with CM12.1.
Can you tell what bothered you to go away from cm13 back to cm 12.1?
caned_monkey said:
Thanks, but I've tried that. Both stock rom and CM13 work without a problem. The issue only seems to be with CM12.1.
Click to expand...
Click to collapse
ezantera said:
Can you tell what bothered you to go away from cm13 back to cm 12.1?
Click to expand...
Click to collapse
CM13 sucks!!! snapchat and instagram keeps on crashing, now I'm using resurrection remix 5.7.3, that sucks too!!
Hi all,
Is there any Custom ROM running Android 11, with encryption working. I tried PE11 and Crdroid 7.4 and Arrow11.
All are going to boot loop, if encryption is initiated.
I'm looking for a ROM which can do encryption (for work purpose). It will be helpful, if someone can share working custom ROM tested.
Also is this some kernel issue or TWRP settings which is causing encryption to fail?
I would also love encryption. This is one of the persistent issues I have with custom ROMs and why I'm moving to a real Linux phone once they get a bit better.
Hi, after attempting to enable encryption I get an infinite boot loop animation, and after I force a hard reset (keeping the power button pressed) the phone boots back to normal as if nothing happened. This means that encryption was not even started (otherwise it would be needed to format partition again if the process was interrupted).
What are my options here? On previous Android versions, whenever I came across a Rom that didn't support encryption, I would just flash a stock recovery image alongside the custom rom and try encrypting again, successfully. However, there are no Android 11 stock recovery images for this device (it got abandoned in Android 8.1 I believe), so this isn't an option anymore.
Unfortunately this ROM doesn't seem to have a dedicated thread here on XDA and people on their Telegram channel have not been able to provide guidance so far...
Any tips are appreciated!
ROM: PixelExperience Plus 11 (Android 11) version 2021.05.14
Device: Moto G5 Plus (potter, XT1685)
Recovery image: TWRP 3.5.2_9-0-potter
I have found no v11 or v10 roms which work with encryption (even when they say they do). I have not tried many v9; Your answer is to go back to stock 8.1 and everything will work again (but you'll be on v8):
[Oreo][Stock][Rom] TWRP Flashable Stock Builds
About this project This project provides repackaged Stock Oreo roms that can be flashed by TWRP. Modifications from stock are listed below. As we are now moving into the Oreo world, I've decided that now is a good time to make a few changes...
forum.xda-developers.com
edit: note that i'm on xt1687 (usa) model of potter
edit2: I just tried Arrow v10(official) and it encrypts (after a number of reboots; give it time)
bravo97 said:
edit2: I just tried Arrow v10(official) and it encrypts (after a number of reboots; give it time)
Click to expand...
Click to collapse
hi, in the case of PE+ 11, it just goes to reboot the first time and stays in loading android screen forever (waited a couple hours last time), so I think "giving it more time" wouldn't solve it.
Good to know there's some Rom compatible with encryption though, although it's android 10... I also got a hint that crDroid 11 may be compatible with encryption on potter.