I was running CM 10.1.3 with no issues. I was attempting to connect my Exchange E-mail account and it said that it needed to encrypt the files, not a big deal, I have had to do this in the past. It starts to do its thing but I see no progress bar like I am used to, just the CM logo spinning. I thought there was a problem and restarted the phone (big mistake) and now I am getting a message that there was an Encryption Error and it tells me to reboot the phone and then reformat. It reboots but goes right back to the message. I boot into recovery mode and attempt to load the .zip from SD card. I get an error "E: can't mound/sdcard". So I'm thinking I need to sideload instead. I download the SDK per some instructions on the internet, install the platform-tools and the USB drivers. I think everything is where it needs to be, I connect the phone, find the ADB.exe file, run a command prompt, type ADB devices but I get nothing.
Please let me know where to go from here!!!
Thanks in advance!
Bump for some ideas for this guy.
Resolved!
Hi guys, I'm having a weird problem with my zenfone 5 (a501cg). I have searched a lot but still can't find out a proper solution So I post it here and try to provide as much information as possible so hopefully developers at xda can help me.
My phone is rooted and I'm currently using modded rom called "bazzrom pinaslang" in the forum. Recently I want to use another rom so I decide to use adb sideload again.
However, the problem occurs: using adb sideload only show "error" message". BUT Adb devices show the phone.
Then I decide to use adb reboot fastboot to enter fastboot. But the phone only show a usb icon, and using "fastboot devices" doesn't show the device anymore.
I try other way by enter recovery mode "adb reboot recovery". The phone show resting android with "no command" message. I also try hold power and press down volumn after that but nothing happend. I try anything with that "power" + "volumn" combo but nothing happend (or it just shutdowns the phone).
Also, using "power" + "up volumn" to enter Droid boot doesn't work.
Driver is install. In device manager it shows "Android composite adb interface".
The only good news is my phone still boots normally and I can use it. Please help me get back my fastboot so I can upgrade my phone to Lollipop and other modded ROM.
Thank you so much !!!!
techgeard said:
Hi guys, I'm having a weird problem with my zenfone 5 (a501cg). I have searched a lot but still can't find out a proper solution So I post it here and try to provide as much information as possible so hopefully developers at xda can help me.
My phone is rooted and I'm currently using modded rom called "bazzrom pinaslang" in the forum. Recently I want to use another rom so I decide to use adb sideload again.
However, the problem occurs: using adb sideload only show "error" message". BUT Adb devices show the phone.
Then I decide to use adb reboot fastboot to enter fastboot. But the phone only show a usb icon, and using "fastboot devices" doesn't show the device anymore.
I try other way by enter recovery mode "adb reboot recovery". The phone show resting android with "no command" message. I also try hold power and press down volumn after that but nothing happend. I try anything with that "power" + "volumn" combo but nothing happend (or it just shutdowns the phone).
Also, using "power" + "up volumn" to enter Droid boot doesn't work.
Driver is install. In device manager it shows "Android composite adb interface".
The only good news is my phone still boots normally and I can use it. Please help me get back my fastboot so I can upgrade my phone to Lollipop and other modded ROM.
Thank you so much !!!!
Click to expand...
Click to collapse
Hi,
Have you tried to boot into your system, enable USB debugging and run
Code:
adb reboot-bootloader
?
dgadelha said:
Hi,
Have you tried to boot into your system, enable USB debugging and run
Code:
adb reboot-bootloader
?
Click to expand...
Click to collapse
Hi dgadelha, thanks for your reply.
I have tried your suggestion before but phone only reboots and display usb icon. I also try power volumn combi like i did in my post but still nothing happened.
Usb debugging is enabled.
Techgeard.
techgeard said:
Hi dgadelha, thanks for your reply.
I have tried your suggestion before but phone only reboots and display usb icon. I also try power volumn combi like i did in my post but still nothing happened.
Usb debugging is enabled.
Techgeard.
Click to expand...
Click to collapse
In that case, follow the "Last resort" part of this guide http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=33800
It will reinstall your fastboot when the USB icon appears
dgadelha said:
In that case, follow the "Last resort" part of this guide
It will reinstall your fastboot when the USB icon appears
Click to expand...
Click to collapse
Hi dgadelha,
I have seen your link before my post, but I still wonder because the "last resort" in the link is used for "bricked" phone or the one that doesn't start up or stuck in somewhere. My phone can still boot and use quite normal : ( except one thing that my sd card always unmounted in this Pinaslang modded rom.
TG.
UPDATE I decide to try xFSTK but my computer still recognizes the device as "adb..." . if I turn off developer mode it becomes "portable device" in Window Device Manager.
The xFSTK can't recognize any Cloverfieldplus. (it shows "CLOVERFIELDPLUS...: 0")
TG.
techgeard said:
Hi dgadelha,
I have seen your link before my post, but I still wonder because the "last resort" in the link is used for "bricked" phone or the one that doesn't start up or stuck in somewhere. My phone can still boot and use quite normal : ( except one thing that my sd card always unmounted in this Pinaslang modded rom.
TG.
Click to expand...
Click to collapse
Hi,
Because the last resort will use a hardware function (xFSTK way) to update your dnx, ifwi and fastboot images. This way you can restore your fastboot.
Thanks.
techgeard said:
UPDATE I decide to try xFSTK but my computer still recognizes the device as "adb..." . if I turn off developer mode it becomes "portable device" in Window Device Manager.
The xFSTK can't recognize any Cloverfieldplus. (it shows "CLOVERFIELDPLUS...: 0")
TG.
Click to expand...
Click to collapse
You must instal the drivers it mentioned.
Also it will appear as Cloverview when the USB logo appears
Thanks!
dgadelha said:
Hi,
Because the last resort will use a hardware function (xFSTK way) to update your dnx, ifwi and fastboot images. This way you can restore your fastboot.
Thanks.
You must instal the drivers it mentioned.
Also it will appear as Cloverview when the USB logo appears
Thanks!
Click to expand...
Click to collapse
Hi dgadelha,
After a while I can start the xFSTK and begin download. However, after some attempts it always say error. The same messages show up as below:
Code:
start
sending dner
writeoutpipe dner
writeoutpipe 0
write----> dner
windriver Error: 0x20000015, Timeour expired
LogError
Error Code:1 - Connection Error
Failed to start Dldr state matchine, aborting...
void CloverviewPlusDownloader::do_abort()
Abott
FAIL
.....
techgeard said:
Hi dgadelha,
After a while I can start the xFSTK and begin download. However, after some attempts it always say error. The same messages show up as below:
Click to expand...
Click to collapse
Hi techgeard,
Looks like it's a driver timeout.
Which OS are you using? I see they used Windows 7 or before on the tests.
Also you should try getting xFSTK developers (on SourceForge) to help about this issue.
Thanks.
dgadelha said:
Hi techgeard,
Looks like it's a driver timeout.
Which OS are you using? I see they used Windows 7 or before on the tests.
Also you should try getting xFSTK developers (on SourceForge) to help about this issue.
Thanks.
Click to expand...
Click to collapse
Iam using Win7x64. The same with the guy posting in the link.
TG.
Hello people,
I did so many wrong decisions and I regret them all :/
Im gonna tell you all th details.
I got OnePlus2 phone and I rooted it.Then the GooglePlay didnt work and I tried to fix it with no success.
So today I decided to unroot my phone with a factory reset.With TWRP installed I deleted all memory from the phone.
I tryed to reboot it and a msg poped up saying "No os installed".
I looked up for ways to fix it with no success.I tryed to connect the device to my pc Windows10 and in device manger its shows up no problem just in the category "Marshall London Device" name "Google Nexus ADB Interface".
I think I bricked my phone.
How to fix my phone and get it back to the normal ?
thanks for the helpers
There are many threads in the general section that can help in situation like yours.
If you can boot into Twrp or Fastboot mode, then use the guides provided by @Spannaa at http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
Alternatively you can use my thread to get back to stock the official OnePlus way at http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
please help, i installed lineage os and today morning my phone is in hard bricked situation. led flash blinks repeatedly, i tried to go in bootloader mode there is only blank screen, when i attached the phone to laptop than QHUSB type of unknown device found in device manager, please tell me any solution for this, i cant go service center due to unlocked the bootloader, they will reject my phone and also i have no much time to fight for this from them, i am in very bad situation because google also have no solution for moto g4, please help me guys
what steps did you use?
I think I have an unsolved problem. I know it doesn't exist, but it's very hard to find it.
I know it's not the Plus, but the Model is the Moto C XT1754 (NAMATH) Android 7.0 Nogaut - NRD90M.060
And there is no specific topic for it, but they are very similar and I thought I could post it here.
It's a very complicated problem, so I'll explain in detail what happened and why I had to come here to solve it.
(translated)
- STARTING:
I installed a TWRP through the app, without unlocking the Bootloader.
Whenever I turned it on, at boot still, the message appeared:
'red state
Your device has failed verification and may not work properly
Your device will boot in 5 seconds'
But it called normally.
I installed 'Magisk Manager 24.2' by zip and app afterwards.
I activated 'Zygisk' and in DenyList I activated/hidden from Google Play Services completely. All.
I restarted the smartphone and Sitema started having numerous errors. Most of the apps that I opened, closed with error, and other apps in the background too, mainly Google Play Services.
I tried to solve this but I couldn't because the smartphone was unusable.
I decided to format by TWRP.
But when I tried to restart the device, I always entered TWRP and continued that message in Boot ('Red State Your Device...')
I decided to reinstall Stockrom from Moto C XT1754.
When I tried to install Stockrom through flash_tool, I couldn't.
It always gives error.
'BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (0x7D5)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
[HINT}:'
or this one is the most common:
'BROM ERROR : ?? (0x1)
[HINT];'
I even tried installing a Custom Rom via Sdcard , 'Viper-namath-20171206-Coral-v3.1.1-UNOFFICIAL' with the GAPPs, etc.
I can install the ROM. (but the GAPPS gives an error at the end of the installation) 'open_gapps-arm64-7.1-micro-20220215'
But I think this case is because it is not installing the Custom ROM correctly. (Because of the Locked Bootloader? Maybe... I'm kind of a layman on the subject)
Because when I restart the device after installation it goes back to TWRP.
I can't get into Fastboot mode with the command by the buttons on the device, only by TWRP when I access 'Reboot>Bootloader'.
Reboot and go to fastboot (Black screen, down there written '=> FASTBOOT mode...'
I've already tried to recover/rescue the device by Motorola/Lenovo's 'Rescue and Smart Assistant'. But when I try to rescue it (with it connected to TWRP) it asks to accept the message to enable USB debugging.
But I don't have access to this window through TWRP.
Here comes the big question, why I am not able to solve my problem:
I think my 'USB Debugging' was off/disabled before I erased everything (formatted).
I'll try Stockrom's Flash through TWRP to see if it solves the problem, but I don't think it will.
I think the problem may be with the 'USB Cable' as well. He's old. I tested with a non-original USB cable that I had to see and I can't either, the errors persisted.
I plan on getting another original to test as well.
Just an observation.
My device is being recognized as 'USB MTP Device' (under 'Portable Devices')
If anyone can save me, I'd really appreciate it!
Thanks in advance for all the help! Every opinion matters!
And when I give the command 'ADB Devices' my device appears 'unauthorized'
'ZW3223CGWK unauthorized'