OK so I had xperia T and one time I installed mokee rom and really liked it but now that I have z2, I was like hey I should check to see if they made builds for z2 too AND BAM the builds were there, hope you'll enjoy this ROM , I haven't tested myself but I'll test it soon to see if it's stable or not, I'm pretty sure it's stable tho because they are "RELEASE" builds which means they been tested after integration and had no bugs :good:
Remember this is a custom rom and your bootloader needs to be unblocked
http://download.mokeedev.com/?device=sirius
How can I install it? It drops an error in recovery
jorvacf said:
How can I install it? It drops an error in recovery
Click to expand...
Click to collapse
What recovery are you using ?
Austin.gonzo said:
What recovery are you using ?
Click to expand...
Click to collapse
XZ-
lockeddualrecovery2.8.23
jorvacf said:
XZ-
lockeddualrecovery2.8.23
Click to expand...
Click to collapse
Is your bootloader unlocked?
jorvacf said:
XZ-
lockeddualrecovery2.8.23
Click to expand...
Click to collapse
Flash this recovery if you have bootloader unlocked
https://mega.nz/#F!aEhmCCyI!hwoqM-eTGm42PwoRGrbdbw
Austin.gonzo said:
Flash this recovery if you have bootloader unlocked
https://mega.nz/#F!aEhmCCyI!hwoqM-eTGm42PwoRGrbdbw
Click to expand...
Click to collapse
How can I flash it?
jorvacf said:
How can I flash it?
Click to expand...
Click to collapse
Via fastboot
Fastboot flash boot boot.img
Austin.gonzo said:
Via fastboot
Fastboot flash boot boot.img
Click to expand...
Click to collapse
Thanks for the info, I did flash the recovery and it worked, but when I try to flash it gives an error status 7 and I can not flash the rom, any suggestions?
jorvacf said:
Thanks for the info, I did flash the recovery and it worked, but when I try to flash it gives an error status 7 and I can not flash the rom, any suggestions?
Click to expand...
Click to collapse
I did not get any errors, I downloaded the RELEASE version of January 21
Status 7 is because of boot.img of the rom itself, maybe, I'm not sure
Related
Here you go folks. The miui v5 3.11.29 official for HTC ONE is released
http://en.miui.com/download-111.html
For MIUI English Forum
> http://en.miui.com/download-111.html
Harish_Kumar said:
For MIUI English Forum
> http://en.miui.com/download-111.html
Click to expand...
Click to collapse
we still need to install 4.2.2 gapps in this rom.
saketh91 said:
we still need to install 4.2.2 gapps in this rom.
Click to expand...
Click to collapse
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Harish_Kumar said:
Oh you completed installing the rom?
i guess first we need to install the kernal and then flash the rom..right?
this is the first time i am trying an official MIUI rom!
Click to expand...
Click to collapse
I don't know abt the kernel but I am loving this rom so far. No lags, the UI is perfect fit for the screen and loving some features like DND, IR etc..,
but the only thing missing is the gapps. We need to install separately i think. Loving the Internationalized weather widget too.
I get build prop problem, who else got it ?
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
you mean while installing?. It installed perfectly for me on TWRP 2.6.3.0
saketh91 said:
you mean while installing?. It installed perfectly fine for me on TWRP 2.6.3.0
Click to expand...
Click to collapse
Yeah, what is your current rom, cid, mid ?
hth2813 said:
Yeah, what is your current rom, cid, mid ?
Click to expand...
Click to collapse
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
saketh91 said:
I was using SD v11.1 before and now installed this rom with no issues. Mine has supercid. I still don't understand what you meant abt build prop problem. Where did you get that error? While installing or while modifying the build prop in the rom?
Click to expand...
Click to collapse
I got that problem while installing ROM, i am in GPE 4.4
I'm also getting a status 7 getprop error in recovery.
hth2813 said:
I got that problem while installing ROM, i am in GPE 4.4
Click to expand...
Click to collapse
Ok there can be different reasons for this.
1.May be a bad download. Try downloading it again.
2.May be you did not clean flash it by wiping cache,system,data. Try wiping everything except internal storage and try again.
3.May be the recovery you are using doesn't support installing this rom. Try TWRP 2.6.3.0 I got it installed perfectly with that.
4.And finally the firmware which you are on. If it is GPE firmware then try switching to sense before flashing this. I had hell lot of problems with GPE firmware like unlocking the bootloader, installing the roms etc..,
May be these are not the reasons for your problem but just give it a try and report back
Droid69 said:
I'm also getting a status 7 getprop error in recovery.
Click to expand...
Click to collapse
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
saketh91 said:
You get status 7 error only in three cases.
1.You edited the updater script in the rom
2.You did not download the rom properly.
3.Mainly you are not using the right recovery. Try using TWRP 2.6.3.0 or higher may be.
Click to expand...
Click to collapse
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Droid69 said:
1. No
2. Could be a bad download, i will download it again and retry.
3. Im on the latest.
Click to expand...
Click to collapse
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
saketh91 said:
ok before you re download just try installing it with TWRP 2.6.3.0 too because i faced some problems earlier with the latest TWRP. Just give a try
Click to expand...
Click to collapse
Rom flashed with TWRP 2.6.3.0 thanks.
Ah, i have just tried CWM Recovery and it installed successful
Droid69 said:
Rom flashed with TWRP 2.6.3.0 thanks.
Click to expand...
Click to collapse
Glad you got it installed perfectly!!
hth2813 said:
Ah, i have just tried CWM Recovery and it installed successful
Click to expand...
Click to collapse
Nice to hear that you got it installed perfectly.:laugh:
hth2813 said:
I get build prop problem, who else got it ?
Click to expand...
Click to collapse
yep the same problem
Hi guys, i tried to root and download twrp for my N6P
I have succsesfully installed the last twrp, then i have installed the supersu 2.46 but no the phone does not boot anymore? can anyone help me?
Regards,
Taker
Taker18 said:
Hi guys, i tried to root and download twrp for my N6P
I have succsesfully installed the last twrp, then i have installed the supersu 2.46 but no the phone does not boot anymore? can anyone help me?
Regards,
Taker
Click to expand...
Click to collapse
You are probably using an outdated version of SuperSU, that apparently doesn't support latest Marshmallow builds. Try this one: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
@DJBhardwaj
booting for me but now i have another problem, i was using an old verndor img, system sayas to me i need to install a newer one but now phone stuck on bootscreen
Taker18 said:
@DJBhardwaj
booting for me but now i have another problem, i was using an old verndor img, system sayas to me i need to install a newer one but now phone stuck on bootscreen
Click to expand...
Click to collapse
Which ROM are you using?
@DJBhardwaj
beanstalk but my own compiled
Taker18 said:
@DJBhardwaj
beanstalk but my own compiled
Click to expand...
Click to collapse
Based on which branch of 6.0.1?
DJBhardwaj said:
Based on which branch of 6.0.1?
Click to expand...
Click to collapse
Yes latest 6.0.1 r42 CM-Based
Taker18 said:
Yes latest 6.0.1 r42
Click to expand...
Click to collapse
I guess it's r24.
You will then need to use vendor image from MHC19Q factory image.You can find the vendor images here: http://forum.xda-developers.com/nexus-6p/general/mhc19q-images-roms-t3352781
DJBhardwaj said:
I guess it's r24.
You will then need to use vendor image from MHC19Q factory image.You can find the vendor images here: http://forum.xda-developers.com/nexus-6p/general/mhc19q-images-roms-t3352781
Click to expand...
Click to collapse
Thanks, can i install it via adb sideload?
Taker18 said:
Thanks, can i install it via adb sideload?
Click to expand...
Click to collapse
You can flash it via TWRP. I don't think sideloading would work for flashing img files.
And BTW, this was the fastest conversation I ever had on XDA :laugh:
DJBhardwaj said:
You can flash it via TWRP. I don't think sideloading would work for flashing img files.
And BTW, this was the fastest conversation I ever had on XDA :laugh:
Click to expand...
Click to collapse
HAHA good :good:
but i dont know how i get it on my phone??
as i am stuck on bootscreen ? can u tell me how?
Taker18 said:
HAHA good :good:
but i dont know how i get it on my phone??
as i am stuck on bootscreen ? can u tell me how?
Click to expand...
Click to collapse
Then flash it from bootloader, it's the easiest way. Connect your phone to the PC, while in bootloader mode. And then flash it using the following command:
Code:
fastboot flash vendor vendor.img
DJBhardwaj said:
Then flash it from bootloader, it's the easiest way. Connect your phone to the PC, while in bootloader mode. And then flash it using the following command:
Code:
fastboot flash vendor vendor.img
Click to expand...
Click to collapse
do i need to extract the file i downloaded?
Taker18 said:
do i need to extract the file i downloaded?
Click to expand...
Click to collapse
Yes, and you will have the file named "vendor.img".
DJBhardwaj said:
Yes, and you will have the file named "vendor.img".
Click to expand...
Click to collapse
ok thanks, flash now, hope it works now )
DJBhardwaj said:
Yes, and you will have the file named "vendor.img".
Click to expand...
Click to collapse
WORKING NOW, do you have a PayPal Mail so i can donate to you?
But i get still the Message: your vendor image is out to date please flash the newest one
And i still get no network on the phone
NO-SIM @DJBhardwaj
Taker18 said:
WORKING NOW, do you have a PayPal Mail so i can donate to you?
But i get still the Message: your vendor image is out to date please flash the newest one
Click to expand...
Click to collapse
No need for a donation or thanks button. You just get it resolved, it will be sufficient for me. Is your ROM synced with r25 or r24? It just came out a day ago. Just cross check.
Taker18 said:
And i still get no network on the phone
NO-SIM @DJBhardwaj
Click to expand...
Click to collapse
Signals were fine before flashing this vendor?
DJBhardwaj said:
No need for a donation or thanks button. You just get it resolved, it will be sufficient for me. Is your ROM synced with r25 or r24? It just came out a day ago. Just cross check.
Signals were fine before flashing this vendor?
Click to expand...
Click to collapse
No beanstalk was the first custom rom i installed on the new device, so i just installed beastalk and i have no signal, from the first sec i install it
Taker18 said:
No beanstalk was the first custom rom i installed on the new device, so i just installed beastalk and i have no signal, from the first sec i install it
Click to expand...
Click to collapse
Tried updating your radio? It could be one cause. May be try switching to another ROM?
There she be. Flash with TWRP.
https://www.androidfilehost.com/?fid=889764386195922277
By popular demand, here are just the modems: https://www.androidfilehost.com/?fid=745425885120733904
And here is just boot.img: https://www.androidfilehost.com/?fid=817550096634771277
TheSt33v said:
There she be. Flash with TWRP.
https://mega.nz/#!WxpxFDDT!wLvfO7kZmYeGM5Ln4uYRq4CBqxGG0Worv9S4sATWF5k
Click to expand...
Click to collapse
could you please upload kernel and baseband only?
i've limited internet connection right now ... the whole rom will seem take forever to be downloaded right now #hammer
thanks anyway
3Dota said:
could you please upload kernel and baseband only?
i've limited internet connection right now ... the whole rom will seem take forever to be downloaded right now #hammer
thanks anyway
Click to expand...
Click to collapse
Sure. Work will be slow today so I'll probably be able to find some time.
Will work with ComputerFreak's tweaked stock Marshmallow? That is, if it's a system patch, and not the whole ROM.
Einsteindks said:
Will work with ComputerFreak's tweaked stock Marshmallow? That is, if it's a system patch, and not the whole ROM.
Click to expand...
Click to collapse
If you flash this, it will erase whatever rom you currently have installed. The TWRP package contains the whole rom.
Are you asking if the OTA is compatible with it? I doubt it. I had a stock-ish setup that only had updated emojis, and the update failed on it.
3Dota said:
could you please upload kernel and baseband only?
i've limited internet connection right now ... the whole rom will seem take forever to be downloaded right now #hammer
thanks anyway
Click to expand...
Click to collapse
Check the OP
TheSt33v said:
Check the OP
Click to expand...
Click to collapse
thanks ... downloading now ...
Still use the beta SU to get root, presumably?
Einsteindks said:
Still use the beta SU to get root, presumably?
Click to expand...
Click to collapse
I would imagine so. I stay unrooted nowadays, but flashing the beta before whatever more recent version you want certainly couldn't hurt.
TheSt33v said:
I would imagine so. I stay unrooted nowadays, but flashing the beta before whatever more recent version you want certainly couldn't hurt.
Click to expand...
Click to collapse
error when flashing 2nd file (radio and kernel) ... flash aborted ...
the file seems ok (no error when test it on notebook)
any suggestions?
3Dota said:
error when flashing 2nd file (radio and kernel) ... flash aborted ...
the file seems ok (no error when test it on notebook)
any suggestions?
Click to expand...
Click to collapse
What version of TWRP are you using? The was a version that had trouble flashing modem images.
3Dota said:
error when flashing 2nd file (radio and kernel) ... flash aborted ...
the file seems ok (no error when test it on notebook)
any suggestions?
Click to expand...
Click to collapse
As I remember, the ROM has to be started, allowed to settle, then go back into TWRP and flash beta SU by itself.
TheSt33v said:
What version of TWRP are you using? The was a version that had trouble flashing modem images.
Click to expand...
Click to collapse
using 3.0.2
Einsteindks said:
As I remember, the ROM has to be started, allowed to settle, then go back into TWRP and flash beta SU by itself.
Click to expand...
Click to collapse
I'm not flashing the whole rom ... just 2nd zip
3Dota said:
using 3.0.2
I'm not flashing the whole rom ... just 2nd zip
Click to expand...
Click to collapse
Update to 3.0.3 mod 3 and try again
TheSt33v said:
Update to 3.0.3 mod 3 and try again
Click to expand...
Click to collapse
still no go ... error : 6
3Dota said:
still no go ... error : 6
Click to expand...
Click to collapse
Hmm. Sorry about that. I just got home. I'll get it sorted out right now
3Dota said:
still no go ... error : 6
Click to expand...
Click to collapse
Try the new one I just uploaded. Should be fixed.
Has anyone flash this new modem on the Droid Turbo xt1254 Resurrection Remix of bhb27 's?
Bumpn gums from my vzw DROID Turbo xt1254
works fine with BHb27 kernel and Crdroid Rom! Thanks
Flashed the kernel & modem to CFs tweaked stock via TWRP 3020. Got no wifi, network is fine. Any thoughts?
Hello guys i'm on LineageOS but i don't know how to downgrade to stock Marshmallow, i tried to search on forum but didnt find something useful to me. Can Someone help me?
Hello
Do.you have access to TWRP and unlocked bootloader? Also, you gonna need to save your bootloader unlock code
MatoXD said:
Hello
Do.you have access to TWRP and unlocked bootloader? Also, you gonna need to save your bootloader unlock code
Click to expand...
Click to collapse
I have twrp and unlocked bootloader Also unlock code
arberinho said:
I have twrp and unlocked bootloader Also unlock code
Click to expand...
Click to collapse
Whts your OEM version C432 or C636?
arberinho said:
I have twrp and unlocked bootloader Also unlock code
Click to expand...
Click to collapse
You can try flashing oeminfo and then stock UPDATE.app via force EMUI update, but data might get deleted
MatoXD said:
You can try flashing oeminfo and then stock UPDATE.app via force EMUI update, but data might get deleted
Click to expand...
Click to collapse
i tried to d in this method, but with emui 5.0 beta doesn't work
97filippo said:
i tried to d in this method, but with emui 5.0 beta doesn't work
Click to expand...
Click to collapse
I can probably see right now, you've done it wrong... Download stock rom from huawei.consumer... For some reason i thought it's gonna be android MM, but it was android N, so no problem here, just download stock rom and you will have newest android.
You probably downloader rom from xda, rom it's in .zip right? And you tried to flash it with TWRP?
MatoXD said:
I can probably see right now, you've done it wrong... Download stock rom from huawei.consumer... For some reason i thought it's gonna be android MM, but it was android N, so no problem here, just download stock rom and you will have newest android.
You probably downloader rom from xda, rom it's in .zip right? And you tried to flash it with TWRP?
Click to expand...
Click to collapse
already tried with dload mode... nothing works and i can't flash any custom recovery... in cmd i see FAILED when i do fastboot flash recovery path/recovery.img (path=c:\user\etc...)
MatoXD said:
I can probably see right now, you've done it wrong... Download stock rom from huawei.consumer... For some reason i thought it's gonna be android MM, but it was android N, so no problem here, just download stock rom and you will have newest android.
You probably downloader rom from xda, rom it's in .zip right? And you tried to flash it with TWRP?
Click to expand...
Click to collapse
Where Can i download the stock rom?
arberinho said:
Where Can i download the stock rom?
Click to expand...
Click to collapse
You can find stock ROMs there https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
So Guys i can install stock nougat Just by installing b360 with TWRP?
arberinho said:
So Guys i can install stock nougat Just by installing b360 with TWRP?
Click to expand...
Click to collapse
it seems like that
97filippo said:
it seems like that
Click to expand...
Click to collapse
I need a safe mode bro, i don't want to brick
arberinho said:
I need a safe mode bro, i don't want to brick
Click to expand...
Click to collapse
man read the guide, it's wrote that u do that at your own risck. it could brick or it couldn't
97filippo said:
man read the guide, it's wrote that u do that at your own risck. it could brick or it couldn't
Click to expand...
Click to collapse
I know but usually It bricks if i don't follow the right steps, i was Just asking if Someone had my same problem
is more secure doing with twrp because u can do a backup. i made with BETA app and nonw i have a lot of problems
97filippo said:
i tried to d in this method, but with emui 5.0 beta doesn't work
Click to expand...
Click to collapse
Yesterday I had this issue, it's more easy than it seems. In Revolution Recovery for Nougat, flash the update.app ZIP with 6.0 , it will show you a lot of errors, but don't worry, it's ok. After this flash than DUALSIMOEM.zip and after that shutdown your phone and use the 3 buttons method to automatically ,,update" to B161.
robi10101298 said:
Yesterday I had this issue, it's more easy than it seems. In Revolution Recovery for Nougat, flash the update.app ZIP with 6.0 , it will show you a lot of errors, but don't worry, it's ok. After this flash than DUALSIMOEM.zip and after that shutdown your phone and use the 3 buttons method to automatically ,,update" to B161.
Click to expand...
Click to collapse
I tried to install that recovery but i can't.. When i flash it in cmd i see FAILED... I'll send a screen asap from my pc
97filippo said:
I tried to install that recovery but i can't.. When i flash it in cmd i see FAILED... I'll send a screen asap from my pc
Click to expand...
Click to collapse
That's because u don t have the bootloader unlocked Also, verify in Developer Options to have Enable OEM on, that's why you have an error in CMD
robi10101298 said:
That's because u don t have the bootloader unlocked Also, verify in Developer Options to have Enable OEM on, that's why you have an error in CMD
Click to expand...
Click to collapse
i have unlocked my bootloader, but i need to check OEM.. ty
------- EDIT -------
i ust unlocked OEM, this evening i'll try to fix my phone! thank you man.. i failed that lel
I recently received a notification on my phone from the default system updater app that there is a update available for my device from b366 to b370
Can i update safely if i have my device rooted using the elite kernel?
Lol anyone???¿??¿
theAuxify said:
Lol anyone???¿??¿
Click to expand...
Click to collapse
flash stock boot.img and then install the update
simo255 said:
flash stock boot.img and then install the update
Click to expand...
Click to collapse
Thank you?
theAuxify said:
Thank you?
Click to expand...
Click to collapse
and flash stock recovery if you have a custom one
simo255 said:
and flash stock recovery if you have a custom one
Click to expand...
Click to collapse
Hehe awesome that you mentioned it now, i never had time to update , and good that i double checked before doing this today. Cheers, and thanks again mate ???