this evening i updated audax rom for g928f from 3.1 to 6.2, everything looked fine since i opened people edge and it freeze while opening it.
So i rebooted my phone and now when i try to turn it on, appears a red text :
KERNEL IS NOT SEANDROID ENFORCING
Custom binary locked by FRP Lock
the only thing i can do is putting the device in download mode
What can i do ? Can i save data from my internal sd? :crying:
Related
A few weeks ago I decided to root my Galaxy S6 Edge+, I used Odin and remained on the default ROM. All went well except whenever I booted my phone I got the "KERNEL IS NOT SEANDROID ENFORCING" however since I noted no adverse effects i left it be. Then this morning I reset my phone (to clear off all my apps and local photos because I was out of storage) and again all went well. Until it went flat. Now the battery is dead and when I plug it in the battery with the lightning appears but turns off after a few seconds then turns back on. Also underneath the seandroid message, there is another message that says "Custom binary blocked by FRP lock". It has been plugged in for several hours but has not charged at all despite attempting using many combinations of cables and power bricks.
UPDATE
I unplugged it and attempted to turn it on but after a few seconds of showing the splash screen, it showed the two red messages then turned off again.
The seandroid message is normal. The FRP lock is because you didn't enable OEM unlock in settings>developer options before you reset your phone.
The only solution is to reflash a stock firmware via Odin. But I can't remember anyone reporting the charging/boot problems you have after tripping the FRP lock.
Good call, worked like a charm! Thanks a lot.
Hi, My G935F is stuck and I cannot flash any thing. I tried a combination boot but it goes to RPMB PROVISIONED error and then stuck there. the error is always "custom binare (boot) blocked by frp lock" . So I tried all the methods which are available online and always tried with z3x pro box, but it is always the same error. So any other ideas , can any body help ?
I appreciate it
thanks a lot
I am also having some issues flashing back to stock Rom and hope some one could offer advice. After trying to root sm-935fd I get a strange screen message I have never seen. Bootloader exception in red and other messages in green. Now I can't get into download mode or boot into normal system. I can't even turn it off. I have rooted many Samsung's but this one was a bit of trouble.
Hello. I have exynos version of s7 edge custom rom installed(Helios), I restart my phone and now cannot turn on, is writing with red letters: CUSTOM BINARY BLOCKED BY FAP LOCK. I tried to restart in recovery mode, but no success. Anybody knows how to solve it?
my phone is note3 N9002, updated to lollipop and activation locked...
after facebook messenger's update my phone got so hot and restarted,,
now whenever i boot i see "android is upgrading.. optimizing 1 app of 1..
sometime it reboots at samsung's logo and rarely it goes to android for 10 seconds or so then i see android acore error and reboots to the loop again!
i noticed that the clock froze and whatever setting i change undo itself when it reboots "if i set wifi on" when it reboots it goes back off as it was
i managed to uninstall messenger quickly but when it reboots its the very same "android is upgrading" and play store notifies me of 1 app updated successfully "messenger"
- i can go to download mode but cant install any rom/bootloader because of "emc_write_fail" because of activation lock?
- recovery mode says "custom binary blocked by Reactivation Lock"
Secure fail: recovery..
-i tried the simcard i've previously locked the reactivation lock but that didnt help..
- i tried to erase /wipe the phone from Samsung's online service but it says not connected "last seen date is when it died"
any ideas? i am ok with wiping all data in phone to get it back..
i tries different roms kitkat and every official rom for it or n9005 "same processor" and failed!
any ideas? does unbrick.img fix this? i mean bypass activation lock to install rom?
if so do i need anything special other than the image and unpack it to sdcard?
Hi , I've received phone from friend of mine to fix, after unsuccessful root , his phone get Samsung logo, and after a while it restarts and returns to the logo again, and so on in a loop. I can get Bixby, volume down and power to get to download mode. Tried to flash official firmware (AU Telstra, G950FXXSADTI1_G950FTELADTI1_TEL) using ODIN, goes OK , then restart to blue screen installing system update and goes to recovery mode. After restart from recovery mode it is back to the begging - endless loop. Try to install TWRP but phone doesn't want to accept. Info from download mode screen: model SM-G950F, FAP Lock OFF, OEM lock OFF, KG State: Prenormal, Current Binary: Samsung Official, Secured download Enabled, Warranty void 1 (0x030c) RP SWREV: B5 K4 S4, CCIC = S2MM005 hw:6 boot:7 main 43 .
Odin is responding to it. Any idea how to bring it back to life ? Something to do with Knox Guard state Prenormal ?
Thanks a lot
sbill said:
Hi , I've received phone from friend of mine to fix, after unsuccessful root , his phone get Samsung logo, and after a while it restarts and returns to the logo again, and so on in a loop. I can get Bixby, volume down and power to get to download mode. Tried to flash official firmware (AU Telstra, G950FXXSADTI1_G950FTELADTI1_TEL) using ODIN, goes OK , then restart to blue screen installing system update and goes to recovery mode. After restart from recovery mode it is back to the begging - endless loop. Try to install TWRP but phone doesn't want to accept. Info from download mode screen: model SM-G950F, FAP Lock OFF, OEM lock OFF, KG State: Prenormal, Current Binary: Samsung Official, Secured download Enabled, Warranty void 1 (0x030c) RP SWREV: B5 K4 S4, CCIC = S2MM005 hw:6 boot:7 main 43 .
Odin is responding to it. Any idea how to bring it back to life ? Something to do with Knox Guard state Prenormal ?
Thanks a lot
Click to expand...
Click to collapse
What happens when you try to flash twrp? Post logs here.
Try to factory reset from recovery after flashing.
Also make sure to flash the latest firmware