I know to root with kingroot and use SUPERSU me to get rid of KingSU or whatever its called. I want to install a android 6.0 theme rom. ( I hate touchwiz and hate 4.x and lower) and also yes i know its 4.4 themed but i like the look of it. i want to install TWRP to flash that rom.
Pix12 said:
I know to root with kingroot and use SUPERSU me to get rid of KingSU or whatever its called. I want to install a android 6.0 theme rom. ( I hate touchwiz and hate 4.x and lower) and also yes i know its 4.4 themed but i like the look of it. i want to install TWRP to flash that rom.
Click to expand...
Click to collapse
Why not install it then?
I have no idea how to flash it!
Pix12 said:
I have no idea how to flash it!
Click to expand...
Click to collapse
http://forum.xda-developers.com/tab-4/general/root-galaxy-tab-4-7-t230-t2835264
I mean just installing twrp...
Also ODIN's link is dead.
Pix12 said:
I mean just installing twrp...
Also ODIN's link is dead.
Click to expand...
Click to collapse
Just follow the instructions.... its not that hard... heres youtube video for twrp rooting (it has twrp install steps) youtube video: https://m.youtube.com/watch?v=tzOz8FtBw04
Pix12 said:
I mean just installing twrp...
Also ODIN's link is dead.
Click to expand...
Click to collapse
That link I gave you is how to install twrp for your tablet, and I attached Odin to this post
do i do the part to root it or i can flash that rom?
Pix12 said:
do i do the part to root it or i can flash that rom?
Click to expand...
Click to collapse
Up to you, I always do the root step out of habit but it shouldn't matter either way since you're flashing a new rom which is already rooted. If you don't do the root step, don't reboot before flashing the rom
If you don't do the root step, don't reboot before flashing the rom
Click to expand...
Click to collapse
What do you mean dont reboot?
Pix12 said:
What do you mean dont reboot?
Click to expand...
Click to collapse
Install the recovery, boot into recovery, while in recovery install the rom, or the supersu zip (or both) and don't reboot normally until you've done that
Pix12 said:
What do you mean dont reboot?
Click to expand...
Click to collapse
You really should take this discussion to original rom thread....
I got twrp working and flashed a rom.
Pix12 said:
What do you mean dont reboot?
Click to expand...
Click to collapse
If youre installing a rom in recovery and wipe system and everything dont reboot, install the zip and then reboot
Related
my phone is bootloader unlock, does it mean I can flash the third part recovery like TWRP, and use it?
MY guess yes..
Sent from my LT30p using Tapatalk
allen_ho said:
my phone is bootloader unlock, does it mean I can flash the third part recovery like TWRP, and use it?
Click to expand...
Click to collapse
TWRP will not work on the OTA, yet. However, there is a working CWM in the HD forum. I flashed it to my M and have zero issues with it.
RikRong said:
TWRP will not work on the OTA, yet. However, there is a working CWM in the HD forum. I flashed it to my M and have zero issues with it.
Click to expand...
Click to collapse
I flashed the CWM recovery too...it does boot to recovery
but it seems to be some problem with CM11 package, the assert check shows my device ID is empty so the recovery just abort the installation.
I want to flash CM11-m6 snapshot....any ideas?
falleny said:
I flashed the CWM recovery too...it does boot to recovery
but it seems to be some problem with CM11 package, the assert check shows my device ID is empty so the recovery just abort the installation.
I want to flash CM11-m6 snapshot....any ideas?
Click to expand...
Click to collapse
CM11 won't work if you've updated. Apparently, the boot loader is updated and the ROMs haven't been updated for it.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
CM11 won't work if you've updated. Apparently, the boot loader is updated and the ROMs haven't been updated for it.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Bad news...Looks like i will be stucked in full bloated stock rom for sometime...thank u
falleny said:
Bad news...Looks like i will be stucked in full bloated stock rom for sometime...thank u
Click to expand...
Click to collapse
You have an unlocked BL, just flash SU to get root, and delete/freeze apps. That's pretty much what I did and used Xposed on top of that.
I haven't tried it yet, buy couldn't you just rsd back to an earlier build then flash your custom ROM?
Sent from my XT907 using Tapatalk
I fastboot flash the lastest CWM recovery, but it didn't work for the CM 4.4.2 ROM, and twrp, it didn't work again. why? does the VFW rom change something?
allen_ho said:
I fastboot flash the lastest CWM recovery, but it didn't work for the CM 4.4.2 ROM, and twrp, it didn't work again. why? does the VFW rom change something?
Click to expand...
Click to collapse
None of the ROMs have been updated to work with the new recovery. Just give it time.
RikRong said:
None of the ROMs have been updated to work with the new recovery. Just give it time.
Click to expand...
Click to collapse
what's that mean?
do you mean the third part recovery didn't work cause the VFW rom?
allen_ho said:
what's that mean?
do you mean the third part recovery didn't work cause the VFW rom?
Click to expand...
Click to collapse
It means that none of the ROMs out right now will work with the new CWM. Also, quit trying flash TWRP. TWRP is not compatible with the new KK, yet.
Got it, many thanks
Root
My xt907 Has the OTA 4.4 update and an unlocked BL. I don't have a custom recovery installed anymore. Is it possible to flash SU or superuser and get root with fastboot. If so. Please help! Thanks. I'm ok with flashing CWN if need be. I just want root to install a Xposed and remove bloatware.
Ahoalton said:
My xt907 Has the OTA 4.4 update and an unlocked BL. I don't have a custom recovery installed anymore. Is it possible to flash SU or superuser and get root with fastboot. If so. Please help! Thanks. I'm ok with flashing CWN if need be. I just want root to install a Xposed and remove bloatware.
Click to expand...
Click to collapse
I'm pretty sure you can use fastboot/ADB to sideload zips, though I'm not super familiar with the commands so I wouldn't know how to explain it to you.
I am familiar enough with the commands, but I am unable to find the zips to flash. any help would be great.
Thanks,
Egg all over the face
I was one of the people who thought it would be cool to update to the OTA immediately without waiting and reading... I got the CWM recovery going and rooted stock 4.2.2 , but I really cant wait for TWRP to get updated so I can get back to my Rom, or really any supported Rom would be better then stock. I have only myself to blame.
Eclipse00 said:
I was one of the people who thought it would be cool to update to the OTA immediately without waiting and reading... I got the CWM recovery going and rooted stock 4.2.2 , but I really cant wait for TWRP to get updated so I can get back to my Rom, or really any supported Rom would be better then stock. I have only myself to blame.
Click to expand...
Click to collapse
Looks like the new TWRP is here, but still needs one tweak. Please follow this thread for updates.
http://forum.xda-developers.com/showthread.php?p=53189684
TWRP for KitKat Bootloader
http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP2710-RAZR_M-KITKAT.img
Hello there,
I thought that there were more people with this problem, but I've this problem: first off, I got stock MM installed on my Style xt1572. Unlocked bootloader and the latest TWRP. But when I try to install SuperSU via TWRP, it just get stuck before the reboot animation. Any idea's what I could try perhaps?
Edit: Solution is just using the SuperSU in this thread: http://forum.xda-developers.com/moto-x-style/general/xt1572-mm-twrp-root-xposed-t3276792
Thanks.
Did you select install SuperSU when twrp asked ? After flashing newest supersu?
Sent from my XT1575 using Tapatalk
Settler11 said:
Hello there,
I thought that there were more people with this problem, but I've this problem: first off, I got stock MM installed on my Style xt1572. Unlocked bootloader and the latest TWRP. But when I try to install SuperSU via TWRP, it just get stuck before the reboot animation. Any idea's what I could try perhaps?
Thanks.
Click to expand...
Click to collapse
Which SuperSU version are you using?
Settler11 said:
Hello there,
I thought that there were more people with this problem, but I've this problem: first off, I got stock MM installed on my Style xt1572. Unlocked bootloader and the latest TWRP. But when I try to install SuperSU via TWRP, it just get stuck before the reboot animation. Any idea's what I could try perhaps?
Thanks.
Click to expand...
Click to collapse
Men i have the same problem and i dont know what to do :/
@patt yes.
@Doktaphex The one TWRP asked me to install and the latest beta. 2.49. Same problem.
Depending on the version of SuperSU that you are using there are 2 different rooting methods.
My suggestion would be to use the systemless root option here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
v2.65 is what you want. When you flash this in twrp it will automatically patch the boot image on your device (whilst also creating a backup of the original). It sounds as though you are both trying to use a version of SuperSU that implements the standard rooting method, this would mean that you must manually flash a modified boot image in order to bypass Android 6.0's internal system modification checks!
Flash the stock boot.img. Then see if it boots. Then ^^^ this^^^
Settler11 said:
@patt yes.
@Doktaphex The one TWRP asked me to install and the latest beta. 2.49. Same problem.
Click to expand...
Click to collapse
Do not allow twrp to attempt to install superSU
IMPORTANT!!!!
Because you have already allowed twrp to do this, you will need to reflash your system partition to ensure that all traces of that version of SuperSU are removed before you flash the newer version.
I hope this helps you guys.
patt2k said:
...
reflash your system partition
....
Click to expand...
Click to collapse
What do you mean with that? We've to reflash a rom, kernel? What?
Settler11 said:
@patt yes.
@Doktaphex The one TWRP asked me to install and the latest beta. 2.49. Same problem.
Click to expand...
Click to collapse
You are not suppose to click install superSU when twrp asks for it.
Sent from my XT1575 using Tapatalk
patt2k said:
You are not suppose to click install superSU when twrp asks for it.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Yes.. But as you can see, I've done that already. But I got a restore without it. But even if I install that latest beta, the problem still presumes.
Settler11 said:
What do you mean with that? We've to reflash a rom, kernel? What?
Click to expand...
Click to collapse
Sorry, I should have been more clear in my instructions. I would go ahead and reflash the rom that you want to use and then flash superSU v2.65.
Reboot and if twrp asks if you want it to install superSU choose the option for it NOT to do so.
Settler11 said:
Yes.. But as you can see, I've done that already. But I got a restore without it. But even if I install that latest beta, the problem still presumes.
Click to expand...
Click to collapse
I had this issue but I had backup of my stock rooted rom. I'd suggest maybe go back to stock with restore tool?
Sent from my XT1575 using Tapatalk
patt2k said:
I had this issue but I had backup of my stock rooted rom. I'd suggest maybe go back to stock with restore tool?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
I'M on stock! And that restore tool is for Pure, not Style! And I don't want to install a custom rom. Stock rom is still fine for me.
Settler11 said:
I'M on stock! And that restore tool is for Pure, not Style! And I don't want to install a custom rom. Stock rom is still fine for me.
Click to expand...
Click to collapse
Idk then sorry I have pure
Sent from my XT1575 using Tapatalk
Also tried Kingo root funny enough, but no go.
Edit: Wow, okay. Installing some kind of version of SuperSU does the trick apparently. It's in here:
http://forum.xda-developers.com/moto-x-style/general/xt1572-mm-twrp-root-xposed-t3276792
hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you
ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here
ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?
strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..
ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now
ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?
So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?
After Root and Install TWRP, when I want to wipe the data accidentally I also delete the system, and when I want to reboot the device there is a notification "NO os installed! are you sure wish to reboot?"
What should I do? sorry I'm still new to this.:crying:
thank you in advance
I think you need to flash system.img back
I don't think I seen anyone upload system.img for this phone here
watatara.102 said:
I think you need to flash system.img back
I don't think I seen anyone upload system.img for this phone here
Click to expand...
Click to collapse
yeah i think no. Is there any other way ?
Arown orton said:
yeah i think no. Is there any other way ?
Click to expand...
Click to collapse
You have twrp. Flash any available custom rom or modify the Updater script in stock rom and flash it via twrp.
Go to this thread for instructions regarding editing the updater script.
https://forum.xda-developers.com/max-pro-m2/how-to/unroot-relock-bootloader-max-pro-m2-t3885870
After flashing the stock rom flash the decrypt zip too.