Hello xda people,
I need urgent help with my galaxy note 4 n910h , I installed an xposed module called "ID Changer Pro" and when I activated it and restarted the phone , it kept rebooting .. when the launcher boots the phone restarts , it doesn't stay for more than 5 seconds tops .. is there a way I can fix this ? I can't enter recovery also it keeps flickering as in rebooting .. on safe mode happens the same it keeps restarting .. what are the solutions ? please help I can't figure out what to do .. is there something I can flash with odin ? and i currently run kitkat 4.4.4 .. could upgrading to lollipop via odin solve the problem ? or can I for example flash TWRP via odin and navigate to the module and uninstall it ?
Sometimes if you can go back in at work then put clear cache
the recommended way is to pull the battery to stop the rebooting, re-insert the battery, enter recovery(volume+, home, power I think), and flash the uninstall zip that xposed created on your internal storage.
after this your phone should boot without loading any xposed modules, so you can uninstall the broken module and reactivate xposed using the xposed installer.
if that doesn't work, flashing any full rom that doesn't have xposed pre-installed should work.(official or custom doesn't matter)
Related
Meizu comes with locked bootloader and it's vulnerability is not found for root.
So kingroot can also not root these devices
But with flyme(yun os) account you can get system privileges (root)
Another issue is for Some firmware there is no access to flyme account
"mzaccount" named app present in system apps which can be opened by nova activity like function of apps (use nova launcher, or lmt activity(lmt app then set activity mzaccont to open)
Then register your account Then go to option then tick the system privileges to get root
Just after selecting the system privileges device reboots do not afraid
After that you can give root permission to apps
Anyway second good news...
On meizu phones you can use xposed framework (apps )
You need an update.zip(firmware) in outermost part of your internal =sdcard/update.zip(better if you check it and install through recovery; first time)
Choose arm64 xposed framework for 64 bit phones like m2 note/mini
Then install your xposed framework (flash using flashfire apk by chainfire ; it may take upto 30 minute to complete in *black* screen don't afraid).
Before installation xposed you should wipe dalvik chache and chache.
When your device booted you may see app optimization starting again and again but don't worry it'll be completed.Complete installation and boot to system may take upto 1 hour so keep patience.
If you stuck in bootloop(just in case) then swich off for 15 seconds and reboot recovery and update through recovery.
I'm not responsible if any bad happens to you.
Don't delete update.zip(firmware). Put it as /sdcard/update.zip forever.(who knows when will you stuck in bootloop)
Don't flash rom with flashfire.
#####UNLOCK BOOTLOADER####
Remember by unlocking bootloader your all files(in internal) and data+ apps will be cleared
Things you'll need
1. Unlock script + recovery
(a) for meizu m2here
(b) for mx4
(C) for m1 note
2. Auto adb driver installer here
3. adb+key.exe here
4. Minimal adb and fastboot here
5. Apps- busybox free,terminal emulator ,super su
**Now see this video in YouTube**
THIS IS A PROBLEM WITH MEIZU USERS IF THEY SEEING A LONG BOOT TIME THEN HORRIFICALLY SOMETIMES THEY CAN NOT BOOT TO RECOVERY OR FASTBOOT BUT TRY WITH COOL MIND IT'LL BE DONE :laugh:
Don't afraid if you seeing bootloop let it complete
Time expected
1. for setting up driver and adb 10 minutes
2. for su binary update 5 minute
3. for install busybox 3 minutes
4. after unlocking bootloader may take time upto 2 hours in bootloop
5. in meizu boot animation takes upto 25 minutes
keep in mind
1. Try not to modify too deeply .
2. Tick usb debugging.
3. Try not to flash Rom or recovery on meizu devices without unlocking bootlaoder and deep knowledge.
4. Don't install xposed framework if you are not aware of risk .
5. Don't give file explorers root for always .
6. Don't try to delete system apps only freeze .
7. Flyme os/yun os is heavily modified Rom so don't need other theming or modification.
Sorry for my bad English
HIT THANX IF I HELPED
IF YOU HAVE ALREADY INSTALLED XPOSED IN YOUR MOBILE UNDER THE LIGHT OF THIS POST THEN PLEASE WRITE YOUR SUGGESTION/EXPERIENCE HERE SO THAT OTHER FOLLOWERS CAN BE GUIDED AND GAIN BELIEVE IN THIS METHOD
FRIENDS PLEASE REPORT WORKING AND NOT WORKING XPOSED MODULES HERE .
nasir.da.vinci said:
Meizu comes with locked bootloader and it's vulnerability is not found for root.
So kingroot can also not root these devices
But with flyme(yun os) account you can get system privileges (root)
Another issue is for Some firmware there is no access to flyme account
"mzaccount" named app present in system apps which can be opened by nova activity like function of apps (use nova launcher, or lmt activity(lmt app then set activity mzaccont to open)
Then register your account Then go to option then tick the system privileges to get root
Just after selecting the system privileges device reboots do not afraid
After that you can give root permission to apps
Anyway second good news...
On meizu phones you can use xposed framework (apps )
You need an update.zip(firmware) in outermost part of your internal =sdcard/update.zip
Then install your xposed framework (flash using flash Gordon=http://forum.xda-developers.com/attachment.php?attachmentid=2366442&d=1383402896)
If you stuck in bootloop then swich off for 15 seconds and reboot recovery and update through recovery
I'm not responsible if any bad happens to you
Don't flash rom with flash Gordon
keep in mind
1. Try not to modify too deeply .
2. Tick usb debugging.
3. Try not to flash Rom or recovery on meizu devices without deep knowledge.
4. Don't install xposed framework if you are not aware of risk .
5. Don't give file explorers root for always .
6. Don't try to delete system apps only freeze .
7. Flyme is/yun os is heavily modified Rom so don't need other theming or modification.
Sorry for my bad English
Click to expand...
Click to collapse
that is working for mx5?
thanks
eduardolobre said:
that is working for mx5?
thanks
Click to expand...
Click to collapse
Not tested but you can try ....
If flash Gordon not works then try flashfire"app.
Flash fire takes sometime 1 hour for flashing
Don't forget to put update.zip firmware in the root of sdcard
Hello,
Your tutorial about xposed also works on lollipop flyme 4.5.7 I ?
Thanks!
It will work on any meizu mobile ..no matters its locked or unlocked bootloader ...but dont try to use deep theming apps neither you'll face bootloop. If you face any type of bootloop (wait 30 minutes) then update the firmware through the native/stock flyme recovery
Here is the link to top themes https://doc-0c-2s-docs.googleuserco...384/*/0Bz7HPQ9NJ9NCWmJwSW9XRGpKODg?e=download
I have not tried this if it has paid themes then don't go ahead and install only free themes.Love and support meizu.
https://doc-0c-2s-docs.googleuserco...384/*/0Bz7HPQ9NJ9NCWmJwSW9XRGpKODg?e=download
Access deny
Sent from my MX5 using Tapatalk
http://forum.xda-developers.com/meizu-mx/help/meizu-mx5-flyme-5-xposed-how-t3290023
This one is on flyme os 5 and for me it seems easier, because the xposed is installed in about 30 sec.
kubas_inko_cz said:
http://forum.xda-developers.com/meizu-mx/help/meizu-mx5-flyme-5-xposed-how-t3290023
this one is on flyme os 5 and for me it seems easier, because the xposed is installed in about 30 sec.
Click to expand...
Click to collapse
that is great but it is not recomended for noob at least with locked bootloader devices
nasir.da.vinci said:
that is great but it is not recomended for noob at least with locked bootloader devices
Click to expand...
Click to collapse
Your right because it is nade JUST for MX5 and it have locked bootloader
Please where is the download link for xposed framework?
Sent from my Letv X500 using Tapatalk
Search exposed for lollipop in Google then go to xda and download sdk22arm64 for 64bit devices
Hello guys, please i need help on reviving my meizu m2 note. It is stuck in bootloop after trying to install Xposed Framework. The boot up is just stuck in the FLYME LOGO. The major problem now is that the phone fails to enter RECOVERY MODE else i would have wiped data/cache or even flash UPDATE.ZIP. The phone enters fastboot mode though but the bootloader is locked so, i cant flash anything via fastboot mode.
Please, help me out.
Misleading title. Clickbait
agssssss
Is there any method to unlock meizu mx4 pro ?
My SGS4 i9505 (Intl.) is running CyanogenMod 13.0, specifically cm-13.0-20160114-NIGHTLY-jfltexx with Gapps flashed.
I also have TWRP 2.8.7 installed on Recovery.
My phone had been working perfectly until this evening. I opened SuperSU app (which I downloaded from Play Store) and a message popped up saying i had to install SuperSU binary Normally or using TWRP/CWM. Normal Install popped up an error message, so I downloaded the zip from download.chainfire.eu (UPDATE-SuperSU-v2.46). Then saved it on my SD card and flashed it through TWRP.
After the installation-flashing was complete, I tapped on Reboot->System and since then I am stuck on loading screen.
Is there a way to undo the flashing (Don't care about SU, just want my data unharmed)?
What did I do wrong so as to avoid doing it next time?
Please help as soon as possible,
Thanks in advance.
no hope you needed to backup your data and format your phone anyway
CM13 is already rooted. You need to enable developer options and then enable root access under developer options.
Just dirty flash your phone with the cm13 zip and you should be fine.
Also remember twrp at times needs a shock treatment (in my language)
When your at the samsung logo which comes before the booting and it has been a while..just pull tbe battery out and after 30 seconds put it back and turn the phone on
Things should be fine.
Hi,
If you need SuperSU on CM13, use SuperSU 2.56 or newer.
Sent from my GT-I9500
Hi, I successfully rooted my note 4 (SM-n910w8) with TWRP recovery. After this I attempted to install Xposed, once I installed the xposed zip file through twrp my phone became stuck on the samsung screen. It will no longer connect to my computer in recovery mode so I cannot flash the xposed uninstaller.
Has anyone run into this issue or know of a way to fix this?
why cant u put xposed uninstaller in ur micro sdcard via pc
and flash it from recovery
Hi,
Best way to do, in my opinion, flash via Odin an original rom. Then restart the procedure.
You might check the version of xposed you use.
Find latest wanam - alt version.
Good luck.
Sent from my Note 4 using XDA Labs
I'm having a lot of trouble with this issue, since it starting with me logging out of snapchat, meaning my login would temporarily fail because my device was rooted and had xposed installed. I tried the normal fix to clear the settings for RootCloak and then add Snapchat back to it. But this solution had stopped working. I then misunderstood a fix for uninstalling Xposed to uninstalling root, which I ended up doing so my device had no root and xposed installed. After realizing my error and that I now can't reach TWRP recovery to try and fix it, I tried to flash it with root so that I could start it again with a fresh root. But when I first tried it, it passed, but it was stuck on the samsung s6 edge + loading screen. At that point I tried booting into recovery with Pwr+Volup+Home but it didn't work, just returned a black screen.
Now whenever I try to flash it with the stock rom to start over again, I've now tried it twice, once with a 6.0.1 stock os which failed and one with a 5.1.1 stock which also failed.
What do I do to fix this? Can someone help?
Thanks.
MM/N - How to Root Samsung Galaxy J7 (2016), Install TWRP, and Install Xposed. (SM-J700T/T1)
Disclaimer
Your warranty is now void.
I am not responsible for any bricked devices. This is the way I did it, some steps may not be necessary.
I'm just sharing what worked for me.
Preparation for ROOTING J7 (2016) :
● Enable USB Debugging on your J7 (2016)*
This is very important thing to be done before you try flashing a firmware or recovery file. USB Debugging mode make Android devices receptive to download and send data over USB cable connection. If you do not know how to turn debugging mode ON, do this :
● In your ROM, go to Settings -] About device. Tap 7 times on Build number to enable Developer options.*
You will see a message that “Developer mode has been enabled” on your device.
● Now go to Settings -] Developer options : Tap it and go to USB debugging option and check the box to enable it.
● In the ‘Developer Option’ you will also find the ‘OEM Unlocking’ option, just enable it. (You need to enable OEM unlock, Otherwise you might end up with boot problems or be unable to flash later on)*
● Install Samsung Android USB Driver for Windows to your Laptop/PC, Then connect your Samsung Galaxy J7 (2016) with USB cable. It will configure driver automatically.
How to ROOT Samsung Galaxy J7 (2016) :
1.] Download Odin, TWRP Recovery, Custom Kernel & Magisk files to your Laptop/PC.
2.] Turn off your phone, Go to download mode (by pressing Volume down+Home+Power buttons at the same time for about 6-8 seconds).*
3.] Press the Volume up button to continue.
4.] Open the ODIN file and run you downloaded on your Laptop/PC.
5.] Connect your phone to your Laptop/PC through orignal USB cable.
6.] When ODIN detects your phone, It will show added in the Log.*
7.] In ODIN click on AP and then select the twrp recovery file by ashyx(twrp_3.0.3-1_sm-j700t_23217.tar). under Options tab disable Auto Reboot. Click on start, The flashing process will start. Once the flash is complete, exit Odin and disconnect your J7 from USB cable. Press Volume down+Home+Power buttons at the same time until the phone turns off, then immediately switch Volume Down to Volume Up, while still holding down the other keys.
You should now see the TWRP logo on your screen. Swipe to Allow Modifications.
8.]*Mount Internal Storage in TWRP:*
Go to download mode again and Open ODIN click on AP and the select Stock based custom kernel (SM-J710F-Kernel-6.0.1-nodmv.tar) under Options tab disable Auto Reboot. Click on start, The flashing process will start. Once the flash is complete, Now exit Odin and disconnect your J7 from USB cable, you can pull the battery then place the battery back in again.*
Note 1 As per my experiences, it is recommended to flash the Kernel, then recovery and then "FORMAT DATA" (not only wipe) to disable encryption. Otherwise, TWRP will not be able to mount /data.*Now, use the back button until you're at the menu. Reboot -> Recovery. Now flash ashyx's boot image patch (no-verity-no-encrypt_ashyx) to keep the system from re-encrypting.
12.] Use the back button until you're at the menu. Reboot -> Recovery. Copy and place topjohnwu's Magisk Stable or Magisk Beta zip file to your Internal OR External SD card.
14.] The recovery will start. Select 'install zip'.
15.] Go to and select the Magisk zip which you downloaded. Swipe to Confirm Flash. Flashing process will start. Now flash ashyx's boot image patch (no-verity-no-encrypt_ashyx) to keep the system from re-encrypting.
16.] Reboot -> System.
ENJOY your rooted Samsung Galaxy J7 (2016) !!
Install Xposed Framework on J7 (2016) :
Most Android users mainly root their devices only to install Xposed Framework. Xposed Framework is a powerful tool that enables you to modify your ROM as you wish using some tweaks. Xposed Framework can be installed not only on Custom ROMS but also on the Stock ROMS. So using Xposed you can add some tweaks to your Stock ROM or firmware and get the features of a custom ROM.
Preparation for Install Xposed :
Make a nandroid backup using TWRP (in case if anything goes wrong) before installing Xposed Framework.
With the Nandroid backup (which is an excellent feature on custom recoveries like TWRP) you can backup all your current state of your operating system on your device and save it in your SD card or on your Computer storage and restore it at anytime you want. Many people will have perplexity that, If their Stock ROM (Firmware/OS) is rooted would it be able to do a backup of their OS and can able to restore it?. Yes you can do backup of the current state of your firmware with the custom recoveries like TWRP no matter your OS is rooted and made changes by using root.
Steps to install the Xposed Framework for Galaxy J7 (2016) :
1. Open up Magisk Manager.
2. Go to Downloads tab.
3. Search 'Xposed' without the quotes.
4. If you are on Nougat, select the version for SDK 25. If you are on Marshmallow, select the version for SDK 23.
5. Select Install.
6. Reboot.
Enjoy the Xposed framework on your Samsung Galaxy J7 (2016) !!
How to use Xposed Installer :
1. Go to Xposed installer app on your phone and select Download.
2. Download and install the different modules you want to tweak your phone. After downloading a modules please don't open the app until you enable it on Xposed framework by going to Module section on xposed installer app and selecting it on the check box there. Then restart your phone to use the module you have installed.
Credits :
@ashyx*for porting TWRP Recovery and making the boot image patch.
@KeMii*for the thread template.
@topjohnwu*for the awesome Magisk.
@rovo89*@wanam*for Xposed frameworks
If I didn't mention you and used your work please kindly forgive me and pm me to fix it right away.
Required Files for Download :
1.Samsung USB Driver for Window
2.Odin3 v3.12.3.zip
3.Magisk Stable or Magisk Beta
4.Ashyx's TWRP Port and Boot Image Patch
Feel free to rate the thread if it helped you guys out!
Your guide will be helpful to those still on MM, but why do you have a part in your instructions about flashing a kernel for the J710 (which is the j7 2016, for the j700t which is the 2015) and a totally different phone. If users flash that kernel they WILL bootloop their phones. And the vyper kernel is a nougat kernel and will not work with a MM rom. At all. Fyi, if anyone flashes any kernel, root must be flashed after and the encryption breaker. Each kernel every time. Not being a **** just noticed some issues and figured I'd help clarify
fullofhell said:
Your guide will be helpful to those still on MM, but why do you have a part in your instructions about flashing a kernel for the J710 (which is the j7 2016, for the j700t which is the 2015) and a totally different phone. If users flash that kernel they WILL bootloop their phones. And the vyper kernel is a nougat kernel and will not work with a MM rom. At all. Fyi, if anyone flashes any kernel, root must be flashed after and the encryption breaker. Each kernel every time. Not being a **** just noticed some issues and figured I'd help clarify
Click to expand...
Click to collapse
You're right, it was a bit confusing, I'll just take out the part about the kernel.
Wait so have you tested the Magisk Xposed for nougat? I think it's in beta and I am quite terrified of trying it...
Topjohnwu says the behavior should be identical to the original zips. Official xposed for nougat was released a while ago with 'some fixes to Samsung roms' , and some people said they got it to work by deodexing their rom. To avoid that step, we use the magisk xposed. If you are willing to deodex your rom, then you can try the official xposed.
tyklink said:
Wait so have you tested the Magisk Xposed for nougat? I think it's in beta and I am quite terrified of trying it...
Click to expand...
Click to collapse
ItsJustAJoke said:
Topjohnwu says the behavior should be identical to the original zips. Official xposed for nougat was released a while ago with 'some fixes to Samsung roms' , and some people said they got it to work by deodexing their rom. To avoid that step, we use the magisk xposed. If you are willing to deodex your rom, then you can try the official xposed.
Click to expand...
Click to collapse
I have been using magisk xposed for about 5 days now.. works fine. Make sure u use the magisk modded xposed installer too or the modules don't work. I run amplify and gravity box
TNX BRO
TNX:good:
Someone here to see if he has the same problem, it turns out that when I try to rotate the screen, like watching a video on YouTube, the phone restarts only a little research and it turns out that the error is caused by Xposed no matter if it's the official version or the magisk version causes the same error, I'm in stock J700T nougat obviously someone is passing this error
carlosbalbuena_ said:
Someone here to see if he has the same problem, it turns out that when I try to rotate the screen, like watching a video on YouTube, the phone restarts only a little research and it turns out that the error is caused by Xposed no matter if it's the official version or the magisk version causes the same error, I'm in stock J700T nougat obviously someone is passing this error
Click to expand...
Click to collapse
I don't have that prob bro.i only have an issue when I restore my nandroid backup, I don't have my texts, on nougat it wipes those too
fullofhell said:
I don't have that prob bro.i only have an issue when I restore my nandroid backup, I don't have my texts, on nougat it wipes those too
Click to expand...
Click to collapse
Mine is just that but it's because of the xposed I do not find sense in that error.
cant install no verify, it says "Error installing zip file '/sdcard/no-verity-no-encrypt_ashyx.zip" what should i do?
guildedblood said:
cant install no verify, it says "Error installing zip file '/sdcard/no-verity-no-encrypt_ashyx.zip" what should i do?
Click to expand...
Click to collapse
Must have been corrupted. Erase and re download. Flash it as is
bhai samsung galaxy on7 7.0 ko kese root kroo koi batado
Flashing problem
Odin is showing pass in the 2nd box and then 1 successful 1 failed. How to solve this issue??
While applying step 7 ,after pressing vol up,home and power button its not showing TWRP logo,instead its suck on galaxy j7 logo,also not booting normally too now,what to do replay asap