(BLU) Xposed on D6533 Xperia Z3+ Dual - Xperia Z4/Z3+ General

Right so I have tried out with different ways of installing xposed on my device,
and this is what I found out that works That I want to share with you guys.
Note: All these is not my work, I just wanted to show you guys a way to install it
Warning : Make sure you have unlock your bootloader, and rooted your device or else it won't work for you!
Also if you have any problem, don't blame me, because you chose to make the decision to modify your device!
Installation:
1) First of all, Install a few apps: "Xposed installer" "Flashfire" (What I use for flashing the .zip files, because we don't have custom recovery for dual sim users yet)
2) Go to this official xposed link to download the "xposed-v79-sdk21-arm64.zip" file
Link: http://forum.xda-developers.com/showthread.php?t=3034811
Note: If you are using Snapchat, remember to login your account first, or else you won't able to login your account after flashing Xposed.
3) Open "Flashfire", Press the + button on the right bottom corner, choose the xposed.zip file you just downloaded. (Don't tick the Auto-mount box)
4) Important!!! Wipe Dalvik cache and Cache partition for good measure.
5) Wait for your device to finish the job to boot in to the system again, sometimes it will cause a once or twice bootloop, but it will boot into the system eventually.
6) After installing Xposed, you will find out that the Camera App stops working, or Force Close.
7) To fix the issue, all you have to do is to deodex the Sony camera app, which you can find out in this post.
Link: http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962
After you deodex your camera app. If you don't know how to put it into your phone with adb, you can just put it on to your sdcard, used rootexplorer or other file manager that supports root actions, copy the file into system/priv-app/cameracommon/ and then reboot your phone
8) If your camera app is not updated, you can go to this link and download the new version.
Link: http://www.xperiablog.net/2015/11/16/new-sony-camera-app-with-refreshed-ui-rolling-for-xperia-z5-series/
9) After you fix everything, you can download all the xposed apps and play around with them :good:
Boot.img if needed:
1) Extract the .rar file
2) Click boot on the "Partition to flash"
3) Open 123.exe and choose boot.img
4) Put your phone into fastboot mode (make sure you device it is connected)
5) Just flash and when you see it is done unplug and thats it
Link: http://www.mediafire.com/download/qwpoib6hop2nl3c/z3%2B+boot.rar
Tip: I don't recommend updating the supersu.apk just stick with what version you got
Extra Audio files if needed:
Link for Dolby Atom app: http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Viper4Android also works for me, so if you are a big fan of V4A please download and install it on to your device
Link: http://forum.xda-developers.com/showthread.php?t=2191223
(Remember to download SeLinux on to your phone, or else the Audio Apps won't work!)
Xposed Apps that I have already tested working::highfive:
Greenify
Bright Lockscreen
Fix Lollipop Memory Leak
Flat style Bar Indicators
Gesture Navigation
GravityBox (Some functions doesn't work)
Lucky Patcher
MinMinGuard
PerfectColourBar
RootCloak
Snapprefs
Xstana
Youtube Adaway
Wechange (Wechat Mod)
Xprivacy
Special thanks to theribs121( for the camera app), AndroPlus (for the Camera Fix), worstenbrood (for the Dolby atom app), zhuhang (Viper4android) and rovo89 (for the xposed installer and .zip file)
If you like my post please leave a thumbs up, but don't forget all this is not my work :fingers-crossed:
If you guys have any question feel free to ask me on this post, I will answer what I know
Good Luck Flashing Your Xposed
ScreenShots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

my dual sim E6533 restarts randomly,overheats alot,and after it restarts the red led blinks 3 times.... please help.

Michael_1020 said:
Right so I have tried out with different ways of installing xposed on my device,
and this is what I found out that works That I want to share with you guys.
Note: All these is not my work, I just wanted to show you guys a way to install it
Warning : Make sure you have unlock your bootloader, and rooted your device or else it won't work for you!
Also if you have any problem, don't blame me, because you chose to make the decision to modify your device!
Installation:
1) First of all, Install a few apps: "Xposed installer" "Flashfire" (What I use for flashing the .zip files, because we don't have custom recovery for dual sim users yet)
2) Go to this official xposed link to download the "xposed-v79-sdk21-arm64.zip" file
Link: http://forum.xda-developers.com/showthread.php?t=3034811
Note: If you are using Snapchat, remember to login your account first, or else you won't able to login your account after flashing Xposed.
3) Open "Flashfire", Press the + button on the right bottom corner, choose the xposed.zip file you just downloaded. (Don't tick the Auto-mount box)
4) Important!!! Wipe Dalvik cache and Cache partition for good measure.
5) Wait for your device to finish the job to boot in to the system again, sometimes it will cause a once or twice bootloop, but it will boot into the system eventually.
6) After installing Xposed, you will find out that the Camera App stops working, or Force Close.
7) To fix the issue, all you have to do is to deodex the Sony camera app, which you can find out in this post.
Link: http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962
After you deodex your camera app. If you don't know how to put it into your phone with adb, you can just put it on to your sdcard, used rootexplorer or other file manager that supports root actions, copy the file into system/priv-app/cameracommon/ and then reboot your phone
8) If your camera app is not updated, you can go to this link and download the new version.
Link: http://www.xperiablog.net/2015/11/16/new-sony-camera-app-with-refreshed-ui-rolling-for-xperia-z5-series/
9) After you fix everything, you can download all the xposed apps and play around with them :good:
Xposed Apps that I have already tested working::highfive:
Greenify
Bright Lockscreen
Fix Lollipop Memory Leak
Flat style Bar Indicators
Gesture Navigation
GravityBox (Some functions doesn't work)
Lucky Patcher
MinMinGuard
PerfectColourBar
RootCloak
Snapprefs
Xstana
Youtube Adaway
Wechange (Wechat Mod)
Xprivacy
Special thanks to theribs121( for the camera app), AndroPlus (for the Camera Fix) and rovo89 (for the xposed installer and .zip file)
If you like my post please leave a thumbs up, but don't forget all this is not my work :fingers-crossed:
If you guys have any question feel free to ask me on this post, I will answer what I know
Good Luck Flashing Your Xposed
Click to expand...
Click to collapse
Would like to test this on my e6533 dual, but stuck with unlocked bootloader on 266 firmware. Any good tutorial how to downgrade to 251 and root, or any new root method for 266?
Very big Thank you for any help.

hussian said:
my dual sim E6533 restarts randomly,overheats alot,and after it restarts the red led blinks 3 times.... please help.
Click to expand...
Click to collapse
What version firmware are you using?

septera said:
Would like to test this on my e6533 dual, but stuck with unlocked bootloader on 266 firmware. Any good tutorial how to downgrade to 251 and root, or any new root method for 266?
Very big Thank you for any help.
Click to expand...
Click to collapse
What do you mean you stuck on the unlock bootloader? And also I am using the 28.A.8.266 at the moment, nothing seems to be wrong, I just basically unlock my bootloader and flash the boot.img to root my phone :highfive:

Michael_1020 said:
What do you mean you stuck on the unlock bootloader? And also I am using the 28.A.8.266 at the moment, nothing seems to be wrong, I just basically unlock my bootloader and flash the boot.img to root my phone :highfive:
Click to expand...
Click to collapse
Ok great news I already unlocked my bootloader. I know how to flash boot.img. (using adb...) Just searching a proper one(working) on z3+ e6533 dual 28.A.8.266 firmware.
Can you mention the link where I can get the right boot.img for my phone?
May be a recovery.img too? So I can backup and restore when needed?

septera said:
Ok great news I already unlocked my bootloader. I know how to flash boot.img. (using adb...) Just searching a proper one(working) on z3+ e6533 dual 28.A.8.266 firmware.
Can you mention the link where I can get the right boot.img for my phone?
May be a recovery.img too? So I can backup and restore when needed?
Click to expand...
Click to collapse
well I will upload mine to the website, I will add a link for you when it is uploaded
Forgot to say that unfortunately there still isn't a recovery for dual sim users yet
we will just have to wait, if you are scared of anything losing on your phone, once it is rooted, use titanium backup to backup everything first

Michael_1020 said:
well I will upload mine to the website, I will add a link for you when it is uploaded
Forgot to say that unfortunately there still isn't a recovery for dual sim users yet
we will just have to wait, if you are scared of anything losing on your phone, once it is rooted, use titanium backup to backup everything first
Click to expand...
Click to collapse
Thanks, I have all synced on google. Can wipe the device, no problem.
By the way how is your device? How long are you using it? Does it overheat? Mine become amazingly hot when I'm using Skype(specially Video call). Is it ok, or can be some kernel tweaks done to control this?
Best Regards
Ivan

septera said:
Thanks, I have all synced on google. Can wipe the device, no problem.
By the way how is your device? How long are you using it? Does it overheat? Mine become amazingly hot when I'm using Skype(specially Video call). Is it ok, or can be some kernel tweaks done to control this?
Best Regards
Ivan
Click to expand...
Click to collapse
Files are uploaded on the first page, well it is my regular used phone, I use it everyday, I don't really get much of a problem while I use it

Michael_1020 said:
Files are uploaded on the first page, well it is my regular used phone, I use it everyday, I don't really get much of a problem while I use it
Click to expand...
Click to collapse
Ok, got it will test it tonight and will report here with the results.
Thank you:angel:

septera said:
Ok, got it will test it tonight and will report here with the results.
Thank you:angel:
Click to expand...
Click to collapse
Okay, please do I want to see if it works for everyone as well, also if you love listening to music, make sure you install a Viper4Android, I uploaded on the first page as well

Michael_1020 said:
Okay, please do I want to see if it works for everyone as well, also if you love listening to music, make sure you install a Viper4Android, I uploaded on the first page as well
Click to expand...
Click to collapse
Ok, will do it too
---------- Post added at 03:46 PM ---------- Previous post was at 03:19 PM ----------
By the way may be is better to install the newer xposed version: xposed-v79-sdk23-arm64 instead of xposed-v79-sdk21-arm64 ?
Can my original boot.img be backuped with adb or fastboot? If im right it is available to do only after root?

septera said:
Ok, will do it too
---------- Post added at 03:46 PM ---------- Previous post was at 03:19 PM ----------
By the way may be is better to install the newer xposed version: xposed-v79-sdk23-arm64 instead of xposed-v79-sdk21-arm64 ?
Can my original boot.img be backuped with adb or fastboot? If im right it is available to do only after root?
Click to expand...
Click to collapse
sdk23 means Android 6.0
So xposed-v79-sdk23-arm64 doesn't mean newer than xposed-v79-sdk21-arm64
For our Z3+ currently, it has only Android 5.0.2, so we should use sdk21(Android 5.0) instead
Sent from my E6553 using Tapatalk

septera said:
Ok, will do it too
---------- Post added at 03:46 PM ---------- Previous post was at 03:19 PM ----------
By the way may be is better to install the newer xposed version: xposed-v79-sdk23-arm64 instead of xposed-v79-sdk21-arm64 ?
Can my original boot.img be backuped with adb or fastboot? If im right it is available to do only after root?
Click to expand...
Click to collapse
well you dont really have to backup your original one, mainly because if anything goes wrong, you will have to flash the system.sin or the whole tft file again :/

Ok so the first results:
Got a root after flashing boot.img.
Installed all software needed and flashed xposed (putted ticks only on wipe cache/ dalvik cache)
After application optimization message phone rebooted. Got red light blink (3-4 times) and already stuck on a loading screen(blue background and moving lines) for more than 10 minutes.
Done switch off by holding power + volume up.
Phone booted after
Camera was not updated and not working. Downloaded and installed 2.0 apk. Works, but standart features like: "Style portrait, AR mask, Face in picture, Sound photo" not working
In Xposed installer says: Xposed not compatible with Android SDK version 21 or your processor architecture (arm64-v8a).
Cant run any xposeed modules...

septera said:
Ok so the first results:
Got a root after flashing boot.img.
Installed all software needed and flashed xposed (putted ticks only on wipe cache/ dalvik cache)
After application optimization message phone rebooted. Got red light blink (3-4 times) and already stuck on a loading screen(blue background and moving lines) for more than 10 minutes.
Done switch off by holding power + volume up.
Phone booted after
Camera was not updated and not working. Downloaded and installed 2.0 apk. Works, but standart features like: "Style portrait, AR mask, Face in picture, Sound photo" not working
In Xposed installer says: Xposed not compatible with Android SDK version 21 or your processor architecture (arm64-v8a).
Cant run any xposeed modules...
Click to expand...
Click to collapse
Well I think you must have done something wrong here, maybe yoy should start all over again, what country firmware are you using? I am using the hk version 266, maybe download the hk ftf file and flash it with flashtool first and start again, also it should work on the xposed as well because I have loop the steps like 10 times in my phone, and everytime xposed is installed on my device, maybe give it a try again, if there is any problem again fell free to ask

Michael_1020 said:
Well I think you must have done something wrong here, maybe yoy should start all over again, what country firmware are you using? I am using the hk version 266, maybe download the hk ftf file and flash it with flashtool first and start again, also it should work on the xposed as well because I have loop the steps like 10 times in my phone, and everytime xposed is installed on my device, maybe give it a try again, if there is any problem again fell free to ask
Click to expand...
Click to collapse
Thanks. I'm using United Kingdom firmware. Will try installing xposed with FlashFire again on the current firmware, but will select in addition to wipe System data and 3rd party apps... Because last time I selected only to wipe Dalvik + cache partition.
If no success this time then will try other firmware with flashtool.
Will reply later with the results

septera said:
Thanks. I'm using United Kingdom firmware. Will try installing xposed with FlashFire again on the current firmware, but will select in addition to wipe System data and 3rd party apps... Because last time I selected only to wipe Dalvik + cache partition.
If no success this time then will try other firmware with flashtool.
Will reply later with the results
Click to expand...
Click to collapse
Okay, hope you with good luck and fingers cross :fingers-crossed::fingers-crossed::fingers-crossed:

Michael_1020 said:
Okay, hope you with good luck and fingers cross :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
After a loong boot (about 15 min) the wizzard is oppened(language, account, wifi...) I was unable to enable wifi. All apps erased. Eventually I done a factory reset. Now waiting while it finishes. Lets hope WIFI will work again.

Seems cleaning system apps data was not a good idea. I lost my wifi function... Tried uninstall and then install xposed. Same effect-> not supported.
So may be it worth a try to install the new 272 firmware? Will it help recover the wifi? Can I flash firmware straight away from the phone external storage?

Related

[Galaxy K Zoom] [Root] [Kernel] Stock kernel with permanent autoroot

KatAutoRoot
This method uses a modified stock boot.img for the Galaxy K Zoom C115
that will root automatically the current /system in place without flashing a new system image.​
Download: http://downloads.timduru.org/android/kzoom/root/Tim_KZoom_KatAutoRootV3.zip
What you get:
- Stock kernel 3.4.39-1837070
- Root + SuperSu apk
- sysrw/sysro
- addblocker (/etc/hosts)
- init.d support
- microSD card write fix for non system applications (modified platform.xml)
The good thing with this new method is that it will also auto-reroot the system if su disappears.
So for example you can flash a new official stock system.img and then on the 1st boot it will root it again automatically, no need to do anything else.
(as long as you don't flash another boot.img of course)
What you need:
- Computer with Odin working (Tested with V3.09)*
- File from above.
How to root:
- Unzip the file on the computer with odin ( you get a .tar.md5 file)
- Shutdown mobile
- Start mobile in odin mode*
(push *together: volume down + home + power, * when confirmation screen appears, push *vol up to confirm)
- Launch Odin
- Connect phone by USB *(Odin will display *"Added", if it works and com port should be listed)
- In Odin options you only need Autoreboot checked
- Click on AP choose the *.tar.md5 unzipped previously
- Wait that odin checks the file (can take a few seconds and odin can freeze during that time, just wait)
- Click on Start
Odin will flash the image and reboot
If you are having wifi password issues, to make sure it works let it boot fully once after flashing, then reboot
(you might have to reenter your wifi password the 1st time you flash)
Happy rooting !
As usual, use at your own risk
Credits:
- Dan Pollock for the original ad-blocker file http://someonewhocares.org/hosts/
- ChainFire for SuperSU
timduru said:
Download: http://downloads.timduru.org/android/kzoom/root/Tim_KZoom_PermaRootV2.zip
It contains a modified stock boot.img for the Galaxy K Zoom
that will root automatically the current /system in place without flashing a new system image.
Happy rooting !
As usual, use at your own risk
Click to expand...
Click to collapse
Fantastic! Thanks for this, much appreciated
Hi Timduru!
What are the advantages of this method compared to the first one? I rooted with the first method and all is working very good but i'd like to know the differencies!
Sent from my rooted, deodexed, zipaligned, busyboxed, Knox free Galaxy S5 Zoom with stock kernel and Xposed-modded stock ROM.
livio80 said:
Hi Timduru!
What are the advantages of this method compared to the first one? I rooted with the first method and all is working very good but i'd like to know the differencies!
Click to expand...
Click to collapse
This one will not flash a system.img , but root your current /system in place.
it will also auto-reroot if you update the system and lose su
That also makes it a smaller download, only a few MBs compared to almost a GB before
If you already used the 1st method you don't need to flash this one.
But will be easier to use this one after the next update in that case.
timduru said:
This one will not flash a system.img , but root your current /system in place.
it will also auto-reroot if you update the system and lose su
That also makes it a smaller download, only a few MBs compared to almost a GB before
If you already used the 1st method you don't need to flash this one.
But will be easier to use this one after the next update in that case.
Click to expand...
Click to collapse
I tried the original method of rooting and it worked without any noticeable issue. Then I read your post about possible kernel conflicts, so I re-rooted with your latest method (didn't want to try the French version in case of potential problems in the future) However, after this re-rooting, I could not update the SU binaries using the normal method, after each attempt it disabled my SIM card which was a worry, but after 2-3 attempts I tried the CWM/TWRP method to update the binaries and that worked oddly enough. Since then everything appears to be working 100% OK.
The main thing is I have my ad blocking, Titanium Backup and most importantly SD card access for my apps!
Thanks again
apprentice said:
However, after this re-rooting, I could not update the SU binaries using the normal method, after each attempt it disabled my SIM card which was a worry, but after 2-3 attempts I tried the CWM/TWRP method to update the binaries and that worked oddly enough. Since then everything appears to be working 100% OK.
The main thing is I have my ad blocking, Titanium Backup and most importantly SD card access for my apps!
Thanks again
Click to expand...
Click to collapse
Yeah, if you had an already rooted system by a different method before,
the thing to do before flashing this one is to cleanup the previous /system/xbin/su or reflash a stock system.img
otherwise it will not reinstall.
Updating through recovery like you did is fine too.
New version V3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: http://downloads.timduru.org/android/kzoom/root/Tim_KZoom_KatAutoRootV3.zip
ChangeLog:
- Add busybox to /sbin/
- Fix SecureStorage errors (wifi passwords might not get stored properly)
To make sure it works, after flashing let it boot fully once, then reboot (you might have to reenter your wifi password the 1st time you flash)
Thanks a LOT!
That was what I am waiting for so long since I selled my rooted S4 Zoom to get the K Zoom!
:laugh::good:
Thank you for this, had my Zoom for a few days and was frustrated not to be able to restore some backed up apps
Just a question, since the device now shows status as "custom", how would you go about un-rooting so you can restore using Samsung Kies if needed?
LususNaturae said:
Thank you for this, had my Zoom for a few days and was frustrated not to be able to restore some backed up apps
Just a question, since the device now shows status as "custom", how would you go about un-rooting so you can restore using Samsung Kies if needed?
Click to expand...
Click to collapse
Same as above but you'd use the official firmware zip,
open the file and just leave the boot.img and system.img
and flash that.
Sooooo glad to hear this. thx man.
the problem is there're various versions of k zoom.
currently 2 model in china. c1116 for china unicom wcdma only. c1158 for china mobile td-scdma. not to mention c115 for many other markets.
is this method suit for all model, or some of them. if so, which model you guys successfully tested?
will test on my c1116 next week. but if anyone can provide their details, will be a great help.
again, great work, it's been a life saver since my ****ty carrier simply deleted any google service and had to stick to whatever bone he throws.
Still WiFi issues...
timduru said:
Download: http://downloads.timduru.org/android/kzoom/root/Tim_KZoom_KatAutoRootV3.zip
ChangeLog:
- Add busybox to /sbin/
- Fix SecureStorage errors (wifi passwords might not get stored properly)
To make sure it works, after flashing let it boot fully once, then reboot (you might have to reenter your wifi password the 1st time you flash)
Click to expand...
Click to collapse
I tried it the first time with the autorootV3, not any older versions before, but it forgets all WiFi passwords...
it says "authetification error" -> I type it in again -> Wifi off and later on = still the same error...
Should I flash your Kernel for the K Zoom to fix this or is there an other way to fix it?
Thanks in advance!:good:
Gerome
btecsm said:
I tried it the first time with the autorootV3, not any older versions before, but it forgets all WiFi passwords...
it says "authetification error" -> I type it in again -> Wifi off and later on = still the same error...
Should I flash your Kernel for the K Zoom to fix this or is there an other way to fix it?
Thanks in advance!:good:
Gerome
Click to expand...
Click to collapse
did you reboot once ?
anarchycn said:
Sooooo glad to hear this. thx man.
the problem is there're various versions of k zoom.
currently 2 model in china. c1116 for china unicom wcdma only. c1158 for china mobile td-scdma. not to mention c115 for many other markets.
is this method suit for all model, or some of them. if so, which model you guys successfully tested?
will test on my c1116 next week. but if anyone can provide their details, will be a great help.
again, great work, it's been a life saver since my ****ty carrier simply deleted any google service and had to stick to whatever bone he throws.
Click to expand...
Click to collapse
it's based on C115 kernel, so yeah better not flash on another model I'd say.
Reboot does not help...
timduru said:
did you reboot once ?
I had rebootet serveral times now, but the problem resists...
(sorry for my bad english, I am german...)
Click to expand...
Click to collapse
btecsm said:
I had rebootet serveral times now, but the problem resists...
(sorry for my bad english, I am german...)
Click to expand...
Click to collapse
Try to long push on the network and click on forget.
reboot
then try again.
Try also to go to applications => ALL => Security Storage
click on force stop + clear data
Clear data?
Sent from my SM-N9005 using XDA Premium 4 mobile app
btecsm said:
Clear data?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yeah , but looks like it it's greyed in your capture, so it doesn't have data.
ChangeLog:
- Add busybox to /sbin/
- Fix SecureStorage errors (wifi passwords might not get stored properly)
To make sure it works, after flashing let it boot fully once, then reboot (you might have to re-enter your WiFi password the 1st time you flash)
Click to expand...
Click to collapse
Thank god, I was getting very stressed that my WiFi was not auto connecting and I tried various things to correct it. Came here to find a solution and voilà! Now all working on re-booting. Thanks for the update!!
I tried everything as described, refreshed the whole stock rom and flashed your kernel...
This doesn't helped...
Nothing more to loose, before I make an full wipe, I decided to freeze and than deinstalled the Security store.
Immediately after that, I turn Wifi off and later on...
Wifi works like a charm now!
Do I have to reinstall the secure store?
For what is it, when it stores my passwords for my Wifi connections?!?
Confused ?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Somehow the problem resists for other networks...
To my 2nd home network it connects as usual and for my other network it does not reconnect...
It seems like it doesn't save any new passwords...
But for one it Works?
Can someone please tell me what to do?
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 06:02 PM ---------- Previous post was at 05:44 PM ----------
Sorry for the much posts here...
But now I have an new solution :
I now have frozen wssyncmlnps and it stores new Networks with passwords!
I also deinstalled DS Battery Saver 3.0
Hope that this useful program is not responsible for my problems...
Sent from my SM-N9005 using XDA Premium 4 mobile app

[GUIDE] How to root m8_dugl (M8 Dual SIM)

Hi
As I struggled a bit, here's how to root the HTC One M8 Dual SIM.
Disclaimer
As always, if you **** your phone up, it's not my fault. Don't blame me. Further, I will not answer any questions about this. Please help yourself.
Please use the "Thanks" ( :good: ) button if you just want to say "Thank you" or "Great" or "I wanna marry you".
Prerequisites
HTC One M8 Dual SIM (m8_dugl)
A complete backup of your phone! (e.g. with titanium backup)
fastboot installed
USB Cable
Some time (do not hurry!)
htc DEV UNLOCK (http://www.htcdev.com/bootloader/unlock-instructions)
Warning
Make sure you have a "m8_dugl" device:
Reboot your device to the bootloader (POWER+VOLUME_UP until the screen blacks out, then POWER+VOLUME_DOWN). If it reads there something different than "m8_dugl", then this guide is not for you!
Steps
Download the custom recovery "TWRP" from here: https://s.basketbuild.com/devs/Captain_Throwback/One (M8)/ALL/Recovery (See hint below)
Download "UPDATE-SuperSU-vX.XX.zip" from here: http://download.chainfire.eu/supersu
Copy "UPDATE-SuperSU-vX.XX.zip" to you phone's internal SD
--> Until now no harm has been done to you device but DEV UNLOCK. So this would also be a good time to do a BACKUP! #JustSaying
Open a command prompt and navigate to your fastboot executable.
Put your phone into fastboot mode: POWER+VOLUME_UP until the screen blacks out, then press POWER+VOLUME_DOWN. You see some options soon. Use the volume buttons to navigate, the power button to perform the selected action. Select FASTBOOT and press the POWER button.
Connect you phone to the PC
Type "./fastboot boot path/to/where/you/saved/TWRP_Recovery_x.x.x.x_M8_CPTB.img"
If boot does not work, you can flash the recovery to your phone. But remember: When you do a stock update, you must revert back to a stock recovery!
Do flash the custom recovert, type "./fastboot flash recovery path/to/where/you/saved/TWRP_Recovery_x.x.x.x_M8_CPTB.img"
Touch "Install"
Select the "UPDATE-SuperSU-vX.XX.zip" file
Swipe to start
Touch Reboot System.
You're phone should be rooted.
** Hint **
If the newest TWRP does not work, try a different one.
If none of them work, try the official one: http://teamw.in/project/twrp2/225
If the official TWRP does not work for you, you can try the following one, but it's rather old: http://forum.xda-developers.com/htc...al-sim-european-version-t2816991/post54258731
****
Cheers,
Chris
PS: @donmarkoni provided some resources that might be useful to you. See his post: http://forum.xda-developers.com/showpost.php?p=56134225&postcount=12
Changelog:
[2015-01-18] Updated parts that do not work anymore. Made version numbers generic.
[2014-10-20] a) I have been hinted that the official TWRP should work for the m8_dugl as well. b) The current version of SuperSU is v2.14 and works well. c) @donmarkoni provided some more resources worth mentioning.
cimnine said:
Hi
As I struggled a bit, here's how to root the HTC One M8 Dual SIM.
Disclaimer
As always, if you **** your phone up, it's not my fault. Don't blame me. Further, I will not answer any questions about this. Please help yourself.
Prerequisites
HTC One M8 Dual SIM (m8_dugl)
fastboot installed
USB Cable
Some time (do not hurry!)
htc DEV UNLOCK (http://www.htcdev.com/bootloader/unlock-instructions)
Note: Reboot your device to the bootloader (POWER+VOLUME_UP until the screen blacks out, then POWER+VOLUME_DOWN). If it reads there something different than "m8_dugl", then this guide is not for you!
Steps
Download the custom recovery from here: http://forum.xda-developers.com/htc...al-sim-european-version-t2816991/post54258731 (It must be made for the m8_dugl, the 'normal' m8 recoveries from TWRP/CWM do not work (yet)!)
Download "UPDATE-SuperSU-v2.02.zip" from here: http://download.chainfire.eu/supersu
Copy "UPDATE-SuperSU-v2.02.zip" to you phone's internal SD
Open a command prompt and navigate to your fastboot executable.
Put your phone into fastboot mode: POWER+VOLUME_UP until the screen blacks out, then POWER+VOLUME_DOWN. Now you see some options. Use the volume buttons to navigate, the power button to perform the selected action. (Just select FASTBOOT and press the POWER button.)
Connect you phone to the PC
Type "./fastboot boot path/to/where/you/saved/m8-dual-twrp.img"
--> Until now no harm has been done to you device but DEV UNLOCK. So this would also be a good time to do a BACKUP! #JustSaying
Touch "Install"
Select the "UPDATE-SuperSU-v2.02.zip" file
Swipe to start
Touch Reboot System.
You should be rooted.
I did not test that yet, but this method should not prevent you from receiving OTAs. But I won't vouch for that.
Cheers,
Chris
Click to expand...
Click to collapse
Thank you Chris,
step by step guides are always helpful, as the answer a lot of questions about the whole procedure. So I´m at least rooted now. Let´s see if OTA´s will work, but they can also be installed via adb. I prefer having a custom recovery for installs and making backups from data, so this solution is the one I need (and always used before btw).
Thank you !
Guido
thanks alot i hope xda opening section for us HTC-M8 Dual Sim Owners
[deleted]
guidogsbn said:
Thank you Chris,
step by step guides are always helpful, as the answer a lot of questions about the whole procedure. So I´m at least rooted now. Let´s see if OTA´s will work, but they can also be installed via adb. I prefer having a custom recovery for installs and making backups from data, so this solution is the one I need (and always used before btw).
Thank you !
Guido
Click to expand...
Click to collapse
Hi
I hope you will tell us if the OTA will work.
By the way, do you know of unlocking the bootloader with HTC Dev create any issue for the future OTA?
Cheers
TBH
Sent from my HTC One_M8 dual sim using Tapatalk
thebighunt said:
Hi
I hope you will tell us if the OTA will work.
By the way, do you know of unlocking the bootloader with HTC Dev create any issue for the future OTA?
Cheers
TBH
Sent from my HTC One_M8 dual sim using Tapatalk
Click to expand...
Click to collapse
With re-locked bootloader and stock recovery OTA will work:good:
guidogsbn said:
With re-locked bootloader and stock recovery OTA will work:good:
Click to expand...
Click to collapse
Thanks
I'm still with the stock recovery
TBH
Sent from my HTC One_M8 dual sim using Tapatalk
Stuck in a boot loop
Hi,
thanks for the guide and it worked perectly. No problems all day long after rooting the phone.
But since this morning I am stuck in a boot loop! Already tried factory reset, that works at first, after the phone is loading some updates, it is running into a boot loop
Is there anything I can do?
Rgds
Volker
Edit: Updated SuperSu, Works again...
m8 update ?
any1 knows if we are ever gonna get updates like regular m8 ? , i am still waiting on the root thing hoping they will update ,
any1 have any information or should i go ahead and root ? , is the performance better after rooting and removing all that bloatware or no significant difference ?
last question plz , does xposed module work with this phone and sense 6 toolbox use in android revolution hd rom ?
i tried asking million times here and and htc and called them and chatted online with them and all says they have no information and only 1 source ( august-sept ) under testing ,, so thats why i am asking plz if any1 knows anything , or can u advice me what to do ?!! cuz my phone sucks compared to my friends regular updated stock m8 in every aspect , sound , performance , battery , benchmarks , ......etc
aymanzz said:
any1 knows if we are ever gonna get updates like regular m8 ? , i am still waiting on the root thing hoping they will update ,
any1 have any information or should i go ahead and root ? , is the performance better after rooting and removing all that bloatware or no significant difference ?
last question plz , does xposed module work with this phone and sense 6 toolbox use in android revolution hd rom ?
i tried asking million times here and and htc and called them and chatted online with them and all says they have no information and only 1 source ( august-sept ) under testing ,, so thats why i am asking plz if any1 knows anything , or can u advice me what to do ?!! cuz my phone sucks compared to my friends regular updated stock m8 in every aspect , sound , performance , battery , benchmarks , ......etc
Click to expand...
Click to collapse
I read somewhere that our dual sim should get directly Android L and until then no update. Xposed module, sense 6 and Wanam Xsense are working good, of course u need to be rooted
FYI - You might want to update this guide to point to the official TWRP for M8 now that it supports Dual SIM.
cimnine said:
Hi
As I struggled a bit, here's how to root the HTC One M8 Dual SIM.
...
Cheers,
Chris
Click to expand...
Click to collapse
@cimnine, I'll leave these links here for you to put in the OP and for the other guys to have at hand:
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Radio_1.18.30306251.05G_30.57.306251.00L_release_381655_combined_signed.zip 1.40 GB
2014-07-26--03-35-20 KOT49H release-keys.zip 1.45 GB
M8_dugl_preload.zip 89.5 MB
m8_dugl_stock_recovery_1.45.401.12.img 13.6 MB
0P6BIMG_M8_TWRP_Recovery_2.8.0.5_CPTB 12.50 MB Thanks to @Captain_Throwback
OTA_M8_DUGL_K444_SENSE60_MR_HTC_Europe_3.33.401.6-1.45.401.12_R_release_3986927s90q9xyzwqo8q8g.zip
Cheers!
donmarkoni said:
@cimnine, I'll leave these links here for you to put in the OP and for the other guys to have at hand:
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Radio_1.18.30306251.05G_30.57.306251.00L_release_381655_combined_signed.zip 1.40 GB
2014-07-26--03-35-20 KOT49H release-keys.zip 1.45 GB
M8_dugl_preload.zip 89.5 MB
m8_dugl_stock_recovery_1.45.401.12.img 13.6 MB
0P6BIMG_M8_TWRP_Recovery_2.8.0.5_CPTB 12.50 MB Thanks to @Captain_Throwback
Cheers!
Click to expand...
Click to collapse
No need to post my TWRP here - the official one works fine.
Captain_Throwback said:
No need to post my TWRP here - the official one works fine.
Click to expand...
Click to collapse
OK, I will remove if you want me to, but most of the credit goes to you for unified TWRP, working MTP and UMS.
donmarkoni said:
@cimnine, I'll leave these links here for you to put in the OP and for the other guys to have at hand:
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Radio_1.18.30306251.05G_30.57.306251.00L_release_381655_combined_signed.zip 1.40 GB
2014-07-26--03-35-20 KOT49H release-keys.zip 1.45 GB
M8_dugl_preload.zip 89.5 MB
m8_dugl_stock_recovery_1.45.401.12.img 13.6 MB
0P6BIMG_M8_TWRP_Recovery_2.8.0.5_CPTB 12.50 MB Thanks to @Captain_Throwback
Cheers!
Click to expand...
Click to collapse
@donmarkoni: i posted this question in the stock recovery thread but got no reply...
i have downloaded the mega file 0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Ra.... 2 times before and tried winzip, 7-zip and winrar but zip file is corrupt. is this a new file? i cant see an md5 or sha. size of my download from windows properties is 1,506,353,851 bytes.
have you checked the file?
the '2014-07-26--03-35-20 KOT49H release-keys.zip' is a clean TWRP backup?
i have made my own backup by temp installing TWRP 2.8 so can also confirm that works (thanks again Captain_Throwback)
any sign of an original RUU yet?
Stepp said:
I read somewhere that our dual sim should get directly Android L and until then no update. Xposed module, sense 6 and Wanam Xsense are working good, of course u need to be rooted
Click to expand...
Click to collapse
See that table from http://android-revolution-hd.blogspot.ch/2014/10/htc-devices-to-receive-android-50.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
guidogsbn said:
With re-locked bootloader and stock recovery OTA will work:good:
Click to expand...
Click to collapse
That's why I usually don't install the recovery but only boot it. We'll see in Spring 2015 if it works, it seems that we won't get an update any sooner.
PS: Can some moderator remove the 5 Minutes Wait restriction from my account? I'm not exactly new to XDA, am I?
gazzacbr said:
@donmarkoni: i posted this question in the stock recovery thread but got no reply...
i have downloaded the mega file 0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12_R_Ra.... 2 times before and tried winzip, 7-zip and winrar but zip file is corrupt. is this a new file? i cant see an md5 or sha. size of my download from windows properties is 1,506,353,851 bytes.
have you checked the file?
the '2014-07-26--03-35-20 KOT49H release-keys.zip' is a clean TWRP backup?
i have made my own backup by temp installing TWRP 2.8 so can also confirm that works (thanks again Captain_Throwback)
any sign of an original RUU yet?
Click to expand...
Click to collapse
0P6BIMG_M8_DUGL_K44_SENSE60_HTC_Europe_1.45.401.12.....signed.zip is a encrypted signed zip, as the file name suggests. It does work, as you can see here. All other files are good too. That's all I can say about it, as I don't have that phone, I was just helping.
cimnine said:
That's why I usually don't install the recovery but only boot it. We'll see in Spring 2015 if it works, it seems that we won't get an update any sooner.
PS: Can some moderator remove the 5 Minutes Wait restriction from my account? I'm not exactly new to XDA, am I?
Click to expand...
Click to collapse
Maybe earlier with 4.4.4 as LLabTooFer4 posted on twitter :
LlabTooFeR ‏@LlabTooFeR 30. Sep.
M8 Dual SIM users don't be disappointed not getting 4.4.3, you will get 4.4.4 before the end of October
:good:
donmarkoni;...encrypted signed zip...That's all I can say about it said:
Ok, thanks for info. Looks like at least one user had success with it so i will keep it in a safe place
Click to expand...
Click to collapse

[ROM] [STOCK] [H901] V10_H901_V20L Update: [11/12/2016]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions on POST Instructions #3
XDA:DevDB Information
V10 H901 V20E, ROM for the T-Mobile LG V10
Contributors
Eliminater74, thewalkingdude, aclegg2011
Source Code: http://STOCK!
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MM+
Based On: STOCK
Version Information
Status: Testing
Created 2016-04-16
Last Updated 2016-11-12
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
PART 1:
Part 1 only needed once:
V10_H901_V20L_Update_P1.zip <----- NEW
V10_H901_V20J_Stock_BootStock_Part1_20160810.zip <------- If you already Flashed V20L, then do NOT flash this one over it, Or HARD BRICK will acure
PART 2: V20L
V10_H901_V20L_FULL_STOCK_p2-signed.zip
V10_H901_V20L_Custom_DeBloated_P2-signed.zip
V10_H901_V20L_Custom_DeBloated_02_P2-signed.zip <-- SDCard Hack added, Bootsound Turned off
V10_H901_V20L_Custom_DeBloated__02_Tweaked_P2-signed.zip <-- Same as the above and Custom Build.Prop Tweaks Added
[EMPTY]
PART 2 V20J:
V10_H901_V20J_Stock_Custom_2e_FULL-signed.zip <---- FULL
V10_H901_V20J_Stock_Custom_2e-signed.zip <---- NEW
V10 Addons:
V10_BlackBerry_Mod_Addon_20160528.zip
V10_BlackBerry_Mod_UnInstaller_20160527.zip
V10_3Minit_Battery_ModV4_Addon_20160602.zip
V10_3Minit_Battery_Mod_UnInstaller_Addon.zip
EMPTY
Camera Mods:
V10_Camera_Stock_Replacement_20160522.zip
G5_Stock_Camera_Ported2V10_By_Eliminater74_20160522.zip
NOTE: The reason for Part1 and Part2, Part1 is only BootStock, All partitions related to Bootloader, Part2 is System/Boot which can change from time to time. Both P1 and P2 much match, Or hardbrick can acure as well as keystore wont match, causing Crashes..
​
Systemless Instructions - How to - 08/08/2016
By jmichaels1982, Senior Member on August 8th, 2016, 10:22 AM
If you are already on MM unrooted: New root android 6.0 H901
ROOT Guide: Step by Step guide on rooting the LG V10 using new found methods / files for MM 6.0
Thank you @civilwarrock For The Written instructions:
Drivers Needed:
I had issues getting ADB to work so I used a driver called "LG United Mobile Driver". Google "LG V10 ADB Driver" and you will find it. Or you can try this which seems to work for some people: http://forum.xda-developers.com/showthread.php?t=2588979
Pre-Setup and Checks:
Step #1, (assuming you are not on Android 6.0) Make sure USB Debugging is enabled, and ensure you can issue ADB Reboot Recovery without a problem
Step #2 You will need to update your TWRP to a newer version. Download an app called Flashify and flash this version of TWRP: http://forum.xda-developers.com/tmobile-lg-v10/development/recovery-updated-twrp-v3-0-1-0-t3350825
It will be the link that says "Marshmallow". Save that file to your SD Card, or internal storage and open flashify and flash that img file under recovery.
NOTE: ITS REALLY IMPORTANT YOU FLASH THE MARSHMALLOW VERSION OF TWRP. MAKE SURE YOU DO THIS AND DO THIS PART CORRECTLY.
Step #2, Reboot into recovery using the command "adb reboot recovery" in ADB. This is to ensure the new version of TWRP is working.
Step #3, Inside of TWRP Poweroff the system, or just pull the battery. We want to make sure your computer recognizes fastboot. With the phone off, boot into fastboot by holding down the volume down button and plugging in the usb cable attached to your computer. This may take a second but you should enter fastboot and the screen will tell you.
Step #4 Issue the fastboot command "fastboot reboot" this is to ensure we can issue fastboot commands. The phone should reboot.
Step#5 Download Part 1 and Part 2 on the first page of the thread, you can use the Less Bloat or Deoxed one but I just used:
Part1: V10_H901_V20E_Stock_MM_P1_20160417.zip
Part2: V10_H901_V20E_Syste_Boot_Par2.zip
Step #6 Put these on your SD Card or internal storage, we will use these later.
Flashing Steps:
Step #7 Reboot into the new version of TWRP, you can do this with the command "adb reboot recovery" or by pulling the battery, holding the volume down button and the power button, waiting till you see the LG Logo, releasing the power button but continuing to hold the volume down button, and then counting to 1 second, and pressing the power button again while still holding the volume down button. Keep holding the two buttons until you see the factory reset screen. Using the volume buttons and the power button arrow down to Yes, and then press the power button and let go, then wait 1 second and arrow down to yes again and press the power button, you should enter TWRP.
Step #8 Wipe Data, System, Cache, Dalvik in TWRP
Step #9 First flash Part1, DO NOT REBOOT
Step #10 Flash Part2, DO NOT REBOOT
Step #11 Pull out your battery, hold the volume down button, and plug in the Micro USB cable and continue to hold the volume down button until you enter fastboot. Once in Fastboot type this command "fastboot oem unlock". NOTE: THIS WILL WIPE ALL DATA ON THE SD CARD, SO HAVE EVERYTHING BACKED UP BEFORE YOU EVEN BEGIN THIS PROCESS.
Step #12 Issue the fastboot command "fastboot reboot" and the phone should now boot into Android 6.0
How to get root:
Pull the battery or power off the phone. Enter recovery using the buttons by: "holding the volume down button and the power button, waiting till you see the LG Logo, releasing the power button but continuing to hold the volume down button, and then counting to 1 second, and pressing the power button again while still holding the volume down button. Keep holding the two buttons until you see the factory reset screen. Using the volume buttons and the power button arrow down to Yes, and then press the power button and let go, then wait 1 second and arrow down to yes again and press the power button, you should enter TWRP."
Once in TWP you need to flash the latest version of SuperSU. You don't need to wipe cache or anything. The latest superuser zip can also be found here http://www.supersuroot.com/download.html .
Remove Bloat:
Removing bloat is pretty easy once you have root. You can download an app from the app store called "Root App Deleter" it is by the developer TopDev. You can navigate to System Apps in the Root App Deleter app and hit Pro mode. Click on any app you don't want and press uninstall. Most apps will fail and the press the force button. I use this to remove all the preinstalled bloat. Works great! Be careful though as you can accidentally remove important stuff. But you will want to remove
TMobile.pr.adapt.
Originally Posted by alphahere
Ia zip with two files odexed so that exposed does not crash the 2nd screen apps.
Anyone can do this - deodex the following files and replace the odex files with deodexed versions.
./system/priv-app/LGInCallUI/LGInCallUI.apk
./system/priv-app/LGContacts/LGContacts.apk
Make sure you removes the odex versions from the directory and exposed works great with these apps. That is all that I was doing. Hope that clears the air a bit. Pretty simple stuff.
Click to expand...
Click to collapse
@alphahere, Posted File: Xposed_2ndScreen_fix_MM.zip
Also posted in Download Section of This Thread.​
If I flash Part 1, Will I Be able to go back to LP?
Simple Answer, NO, Because you would brick your device with that Anti RollBack Feature that LG added. But you can Try a LP ported Rom System/Boot Only.
If I Brick my Device, Can I blame you?,
Better read the #OP, and Understand that im not responsable for crazy choices that others make.
I am getting FC:
Install another Part 2 zip, or try clearing cache.....
Can I dirty Flash this:
Yes you can, I did.. But if you shall get errors, then Wipe and try the clean way.......
5
6
7
8
9
10
11
12
13
14
CHANGELOG
Awesome work! Looking forward to this one. I'm assuming WiFi Calling, Video Recording, and Fingerprint will work with this one as opposed to the Korean ROM?!
Edit: If you want someone to test first, let me know
Good work! I shouldn't have jumped the gun and updated to 6.0! Damn you LG.
Would it be safe to say that it's worth a warranty replacement and getting a refurb with 5.1.1 so this can be flashed? Or would it be better to figure out and / or wait for a way to get a recovery flashed onto the new stripped bootloader? Don't want to be impatient again and end up with a refurb (just feels wrong after buying it new ), but I'd love to skate around on rooted 6.0.
Outstanding. We're very lucky to have great devs for this device. Also great being able to stick it to them with the anti rollback junk.
Sent from my LG-H901 using XDA-Developers mobile app
Any particular recovery version needed
Sent from my LG-H901 using XDA-Developers mobile app
SIGMAxB said:
Any particular recovery version needed
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
3.0+
Dam went ahead and updated to MM this morning. Should have waited longer
TheRealKingSen said:
Dam went ahead and updated to MM this morning. Should have waited longer
Click to expand...
Click to collapse
Should have used the Korean ROM as a stopgap, that worked great minus a couple features I'm sure the dev's here will figure out how to fix that at some point though.
Installing this ROM now! Thanks so much Eliminater for all your hard work. Dirty flashed over the Korean ROM, hope there's no issue there. Taking awhile for Android to update as expected, does seem to boot though. Will let you know anything I find, if any, once installation is complete!
Edit: Hmmmm, I was able to boot once (although it did strangely reboot once after hitting the bootloader right after flashing this ROM) and upgrade Android. I tested video recording and that worked, but wifi calling and fingerprint did not. However, after rebooting I am getting stuck at the bootloader - it just freezes there . Restoring a LP ROM then going to try dirty flashing over that. If that doesn't work, I guess I will just clean flash; was trying to avoid that though.
I noticed you didnt mention root, so flashing latest SU is a go????
Sent from my LG-H901 using XDA-Developers mobile app
BallCity said:
Should have used the Korean ROM as a stopgap, that worked great minus a couple features I'm sure the dev's here will figure out how to fix that at some point though.
Installing this ROM now! Thanks so much Eliminater for all your hard work. Dirty flashed over the Korean ROM, hope there's no issue there. Taking awhile for Android to update as expected, does seem to boot though. Will let you know anything I find, if any, once installation is complete!
Edit: Hmmmm, I was able to boot once (although it did strangely reboot once after hitting the bootloader right after flashing this ROM) and upgrade Android. I tested video recording and that worked, but wifi calling and fingerprint did not. However, after rebooting I am getting stuck at the bootloader - it just freezes there . Restoring a LP ROM then going to try dirty flashing over that. If that doesn't work, I guess I will just clean flash; was trying to avoid that though.
Click to expand...
Click to collapse
yea, wifi calling works for me. I did not test fingerprint,
and the stuck at bootloader isnt you.. what happen is when I made some changes to boot animation.. well.. it seems to take longer on the boot then it did before..
if you leave it alone for at least 2 - 3 mins you will see the t-mobile while logo show up..
Ill fix that in later editions.. I just wanted to get this up really quick.......................
There are some issues with this release...... Sorry peepz, I started to notice them after reboot and all.....................
Give me time to try and fix things.... I got alot to do.................
Eliminater74 said:
yea, wifi calling works for me. I did not test fingerprint,
and the stuck at bootloader isnt you.. what happen is when I made some changes to boot animation.. well.. it seems to take longer on the boot then it did before..
if you leave it alone for at least 2 - 3 mins you will see the t-mobile while logo show up..
Ill fix that in later editions.. I just wanted to get this up really quick.......................
Click to expand...
Click to collapse
Ah, okay, I should have given it more time! I will restore a Nandroid and check that out.
As for WiFi calling, I got the tutorial pop-up for WiFi Calling and even enabled it in the call settings, but it kept saying that WiFi was not connected when it clearly was enabled and connected. Tried disabling/re-enabling WiFi to no avail.
As for the Fingerprint, I tried setting up the Fingerprint security settings and it just did not register at all that I was touching the sensor. Perhaps it needed a reboot, will look at it further later.
Edit - what other issues were you seeing? Anything game-breaking? Should I go back to the Korean ROM or are the issues you seeing fine for now?
---------- Post added at 05:02 PM ---------- Previous post was at 05:01 PM ----------
Sik-1 said:
I noticed you didnt mention root, so flashing latest SU is a go????
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
This includes SuperSU in it. When flashing this ROM it will also update the BOOT IMG and include SuperSU there. So yes, it is pre-rooted.
BallCity said:
Ah, okay, I should have given it more time! I will restore a Nandroid and check that out.
As for WiFi calling, I got the tutorial pop-up for WiFi Calling and even enabled it in the call settings, but it kept saying that WiFi was not connected when it clearly was enabled and connected. Tried disabling/re-enabling WiFi to no avail.
As for the Fingerprint, I tried setting up the Fingerprint security settings and it just did not register at all that I was touching the sensor. Perhaps it needed a reboot, will look at it further later.
Edit - what other issues were you seeing? Anything game-breaking? Should I go back to the Korean ROM or are the issues you seeing fine for now?
---------- Post added at 05:02 PM ---------- Previous post was at 05:01 PM ----------
This includes SuperSU in it. When flashing this ROM it will also update the BOOT IMG and include SuperSU there. So yes, it is pre-rooted.
Click to expand...
Click to collapse
Yea, my sound just went byebye, I dont get it.. The KR rom worked perfect except for the Video Encoding do to the PAL, while we are NTSC.....
but this US T-Mo is giving more problems then its worth, I think LG really tired to screw up over on this one...........
Someone on the G3 ported over the G5 GUI thing............. I should do the same thing..........
Also, On this, If I can figure out what blobs use the PAL and switch them out with the T-Mo that might fix alot of them issues over there...
but this is ridiculous.......... LG Just doesnt like US.. We save them from being enslaved by north Korea and this is how they treat us..........
Eliminater74 said:
but this is ridiculous.......... LG Just doesnt like US.. We save them from being enslaved by north Korea and this is how they treat us..........
Click to expand...
Click to collapse
:laugh::laugh:
Restored nandroid. Sound stopped working. No noticeable other problems.
Sent from my LG-H901 using XDA-Developers mobile app
Woooow Thank you so much, I guess it's time to back to play whit the v10

LG Stylo 2 Boost Varient Permanent Root Accomplished!

PLEASE HIT THANKS IF THIS WORKS FOR YOU
ok guys i got permanent root there is one pre qualification you will need to accomplish this you must be on software version LS775ZV3 currently this is the only version that can get temp root from kingroot which is what you will need to start this process. ok so if your one of the lucky ones that have that software version and didnt update go here http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461 and download the latest version of kingroot which i believe is 4.9.6 install it and run it and get temp root, after you verify that your phone is rooted what we need to do now is replace kingroot with super su without rebooting the phone a softboot is ok the temp root will stick with a softboot your going to have to go to the link and follow the guide there to replace kingroot with super su using terminal emulator http://forum.xda-developers.com/a310/general/how-to-remove-replace-kingroot-kinguser-t3308989 . so after you follow that guide kingroot will be gone and super su is now on your phone. super su will ask you to update the su binary make sure to use the normal option, after you press that button it will start to update but will fail so what your going to have to do next is install (Root) FlashFire to install the su binary update manually which can be found here https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en and the su binary zip file can be found here http://forum.xda-developers.com/showthread.php?t=1538053 . i recommend the stable version, download that zip and put it at the root of your internal memory after you do that and install FlashFire on your phone its time to get down to business open FlashFire when it asks for root permission make sure to grant it after that hit the + symbol then press the button that says "flash zip or ota" when it opens it will show the content of your internal memory locate the su binary zip file that you put there earlier and press it to load it up to flash, make sure the only thing checked is the "mount/system read/ write" and hit the check mark to ok it then hit the wipe button and make sure the only two things checked are the "Dalvik cache" and the "Cache partition" hit the check mark to ok it. after that scroll down to the very bottom and hit the flash button after that it will start to flash the updated su binary and then it will reboot and i know it seems scary but the red notification light will stay on until it reboots all the way and there will be red text that pops up and says boot verification fail it scared the hell out of me i thought i bricked my phone again anyway give it a minute or two to boot and once its done and boots into android you have a fully rooted LG Stylo 2 like i said i have the boost variant not sure about the other versions but these steps are pretty universal on any android device also just so i don't get blamed do this at your own risk im not responsible for you messing your phone up but it worked for me perfectly i have restarted my phone normally a hundred times and root is there every time anyways enjoy im not much of a developer so please don't ask me about custom recoveries or custom roms i don't do that but now that we have root maybe a developer might come in and help or something.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PLEASE HIT THANKS IF THIS WORKS FOR YOU
I can verify that xposed-v86-sdk23-arm works on this phone I flashed in FlashFire. This is the correct version here http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v86-sdk23-arm.zip and here is the installer for your phone http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Reserved
damn I have version 4 not 3 ugh!!!!!
Hangs on black screen
After I hit the flash button in flashfire it gets to the loading screen and then after that it hangs at a black screen
Slayer1822 Jr said:
After I hit the flash button in flashfire it gets to the loading screen and then after that it hangs at a black screen
Click to expand...
Click to collapse
when you remove the battery and restart the phone is it able to boot back into android? not sure why it would hang just follow the steps to a T it should work, this is the exact same way they rooted the kindle fire 7 5th gen with blocked bootloaders as well that is why I said its pretty universal and not device specific but if your phone is fine just reboot and retry.
DirtyPISTOLA said:
when you remove the battery and restart the phone is it able to boot back into android? not sure why it would hang just follow the steps to a T it should work, this is the exact same way they rooted the kindle fire 7 5th gen with blocked bootloaders as well that is why I said its pretty universal and not device specific but if your phone is fine just reboot and retry.
Click to expand...
Click to collapse
I've rebooted and retried multiple times over and always have the same issue. My phone has always had the red writing when you first power it up, ever since I rooted it with KingRoot anyways. Is there anyway to get it back to 100% stock? Would that help? And when I say 100% stock I mean above and beyond wiping it
Slayer1822 Jr said:
I've rebooted and retried multiple times over and always have the same issue. My phone has always had the red writing when you first power it up, ever since I rooted it with KingRoot anyways. Is there anyway to get it back to 100% stock? Would that help? And when I say 100% stock I mean above and beyond wiping it
Click to expand...
Click to collapse
Not until someone puts the kdz file online for us to flash so far I haven't found one but I'll post when and if I do.
Slayer1822 Jr said:
After I hit the flash button in flashfire it gets to the loading screen and then after that it hangs at a black screen
Click to expand...
Click to collapse
You must be getting some error message on the black screen. It usually fails if the framework is incorrect.
Slayer1822 Jr said:
I've rebooted and retried multiple times over and always have the same issue. My phone has always had the red writing when you first power it up, ever since I rooted it with KingRoot anyways. Is there anyway to get it back to 100% stock? Would that help? And when I say 100% stock I mean above and beyond wiping it
Click to expand...
Click to collapse
Make sure your phone isn't Version 4. If it is....then that's probably your issue. This method only works for Version 3 not 4
JOKERx2 said:
Make sure your phone isn't Version 4. If it is....then that's probably your issue. This method only works for Version 3 not 4
Click to expand...
Click to collapse
I have version 3
Slayer1822 Jr said:
I have version 3
Click to expand...
Click to collapse
Hhhhhmmmm......I would say to put all your info that doesn't expose you up on here so people know of your issue. Speak to an admin or the OP and see what info they would require to be posted. Every article I've read so far has been positive when it comes to V3 on Boost variant of Stylo 2. Unfortunately I have V4; so I'm patiently waiting.
Silly Me.
(This method Of Permanent Root works :angel: ,But I Was expermenting..)I Soft Bricked My Lg Stylo 2 Boost Varient,But I managed To Flash A Foreign Recovery.img (Twrp) That works Just enough for me to debug My Phone Long story short...i have a corrupted Boot.img And I Need To replace it with A Working One..The Only Problem is That I Dont Have a Boot.Img Of "Lg Stylo 2 BoostVarient {lss75)" If Some One has this Phone Could they Download "Partitions Backup & Restore" From the playstore* and backup boot.img ...and Post It Or send It.
-GOD- said:
(This method Of Permanent Root works :angel: ,But I Was expermenting..)I Soft Bricked My Lg Stylo 2 Boost Varient,But I managed To Flash A Foreign Recovery.img (Twrp) That works Just enough for me to debug My Phone Long story short...i have a corrupted Boot.img And I Need To replace it with A Working One..The Only Problem is That I Dont Have a Boot.Img Of "Lg Stylo 2 BoostVarient {lss75)" If Some One has this Phone Could they Download "Partitions Backup & Restore" From the playstore* and backup boot.img ...and Post It Or send It.
Click to expand...
Click to collapse
I have a system dump from my ls775,
I might be able to help with that but stuck at work for the night.
Sent from my LGLS775 using XDA-Developers mobile app
-GOD- said:
(This method Of Permanent Root works :angel: ,But I Was expermenting..)I Soft Bricked My Lg Stylo 2 Boost Varient,But I managed To Flash A Foreign Recovery.img (Twrp) That works Just enough for me to debug My Phone Long story short...i have a corrupted Boot.img And I Need To replace it with A Working One..The Only Problem is That I Dont Have a Boot.Img Of "Lg Stylo 2 BoostVarient {lss75)" If Some One has this Phone Could they Download "Partitions Backup & Restore" From the playstore* and backup boot.img ...and Post It Or send It.
Click to expand...
Click to collapse
Can you post that version of twrp how well does it work can you boot into it
DirtyPISTOLA said:
Can you post that version of twrp how well does it work can you boot into it
Click to expand...
Click to collapse
Hello Friend :victory:,And Yes It Boots;But The *Touch Screen Does Not Work* and sometimes It Can Boot up with half Of The dIsplay Meaning Youll Only Be able To See Half Of Twrp But that does Not matter since *Touchscreen Does Not work* . ,The Only reason I flashed It Is Because Lg Stylo 2 original Recovery.img Could Not Allow me to Access Adb Normally It Only Lets You Use The Option "Update using Adb" Which Only Allowed Sideload.....The T.W.R.P Only allows You To Do Adb Commands etc adb shell....Also The T.W.R.P Is From A similar Phone Called ((( "LG G Stylo" <H631>))) I Recommand Googleing It Before Installing,. ---> https://www.androidfilehost.com/?fid=24052804347823826 ((Also If Some One Figures Out how To Obitain The stock recovery.img Of "Lg Stylo Lss75" Then I Could Do this,Well anyone --> https://www.youtube.com/watch?v=hwMFBuCY-5k #Dont Forget To Flash This Twrp In FastBoot Mode Or You Can Use An App called flashfly#
---------- Post added at 03:17 AM ---------- Previous post was at 02:50 AM ----------
jesful2011 said:
I have a system dump from my ls775,
I might be able to help with that but stuck at work for the night.
Sent from my LGLS775 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks Man When You Get The chance.. If I Un Soft Brick My Self Then This Should UnBrick Some Lss75 Owners To!
I have pulled the stock recovery.IMG https://drive.google.com/file/d/0B4Gofg_yEN9-NHNsQ0ZHVEcwQlU/view?usp=docslist_api
-GOD- said:
Hello Friend :victory:,And Yes It Boots;But The *Touch Screen Does Not Work* and sometimes It Can Boot up with half Of The dIsplay Meaning Youll Only Be able To See Half Of Twrp But that does Not matter since *Touchscreen Does Not work* . ,The Only reason I flashed It Is Because Lg Stylo 2 original Recovery.img Could Not Allow me to Access Adb Normally It Only Lets You Use The Option "Update using Adb" Which Only Allowed Sideload.....The T.W.R.P Only allows You To Do Adb Commands etc adb shell....Also The T.W.R.P Is From A similar Phone Called ((( "LG G Stylo" <H631>))) I Recommand Googleing It Before Installing,. ---> https://www.androidfilehost.com/?fid=24052804347823826 ((Also If Some One Figures Out how To Obitain The stock recovery.img Of "Lg Stylo Lss75" Then I Could Do this,Well anyone --> https://www.youtube.com/watch?v=hwMFBuCY-5k #Dont Forget To Flash This Twrp In FastBoot Mode Or You Can Use An App called flashfly#
---------- Post added at 03:17 AM ---------- Previous post was at 02:50 AM ----------
Thanks Man When You Get The chance.. If I Un Soft Brick My Self Then This Should UnBrick Some Lss75 Owners To!
Click to expand...
Click to collapse
I have pulled the stock recovery.IMG https://drive.google.com/file/d/0B4Gofg_yEN9-NHNsQ0ZHVEcwQlU/view?usp=docslist_api
DirtyPISTOLA said:
I have pulled the stock recovery.IMG https://drive.google.com/file/d/0B4Gofg_yEN9-NHNsQ0ZHVEcwQlU/view?usp=docslist_api
Click to expand...
Click to collapse
Thank You Man,I Have Made A Working T.W.R.P.img , Its The best That I can Do (Stablity Ok I Have Not Found Any Issues As Of Yet..) :silly: :angel: Amen ! For Lg Stylo 2 Lss75. https://drive.google.com/file/d/0B4Gofg_yEN9-Z2hqNFZEUHBzNk0/view?pref=2&pli=1
-GOD- said:
Thank You Man,I Have Made A Working T.W.R.P.img , Its The best That I can Do (Stablity Ok I Have Not Found Any Issues As Of Yet..) :silly: :angel: Amen ! For Lg Stylo 2 Lss75. https://uploadfiles.io/68a65 Yes The Link Is Bad But I Plan To Put It On Android File Host When They Accept me as Dev.. . Or Could you Guys Do it For me The Link Will Last 30 days.
Click to expand...
Click to collapse
Here i uploaded it to my Google drive feel free to use the link as your own I'll keep it up for a long time for you https://drive.google.com/file/d/0B4Gofg_yEN9-Z2hqNFZEUHBzNk0/view?usp=drivesdk so have you tested this on your phone it's 100% working?

Tab S2 8.0 (T710) Android N Firmware- link

Hello.
I have managed to get the update file for Android N for the T710 variant of the Tab S2. The version I'm linking is for the UK region.
Here is the mega.co.nz https://mega.nz/#!xAAFQDqa!rZSJEqdEjNZpK59xggKxVRKukLXNm2oi472I4Rx-JSs
Make sure the select all three files to flash: AP, BL and CSC.
As Dariusdd pointed out, the update clears all your user settings and files.
only t815 not got yet...
Thank a lot for sharing...much faster download ...
It worked fine, just a future warning for everybody who installs it: it will wipe your internal memory, move your Titanium Backup data to your SD card or PC (don't be like me).
Dariusdd said:
It worked fine, just a future warning for everybody who installs it: it will wipe your internal memory, move your Titanium Backup data to your SD card or PC (don't be like me).
Click to expand...
Click to collapse
Mine stop flashing in user data...
Just use ap file in odin... Or i need all file to flash ?
I only selected the AP part of the install. Did you guys check the BL and CSC MD5's?
hwooei said:
Mine stop flashing in user data...
Just use ap file in odin... Or i need all file to flash ?
Click to expand...
Click to collapse
I did it with AP only as well and it's working fine. Came from stock 6.0.1.
I flashed all 3 files, also I can't seem to find the mobile hotspot options you've told us about. Might be because you didn't flash the other 2 files or because it was a dirty flash?
Dariusdd said:
I flashed all 3 files, also I can't seem to find the mobile hotspot options you've told us about. Might be because you didn't flash the other 2 files or because it was a dirty flash?
Click to expand...
Click to collapse
Thanks for the info. I flashed the rest of the files and the useless options are gone.
for those stuck in Odin, use Odin 3.12.3
Link: https://forum.xda-developers.com/attachment.php?attachmentid=3877298&d=1474046912
---------- Post added at 09:15 PM ---------- Previous post was at 09:12 PM ----------
also just to let you guys know, rooted it with twrp_3.1.0-1_sm-t710 and magisk v12
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ather said:
for those stuck in Odin, use Odin 3.12.3
Link: https://forum.xda-developers.com/attachment.php?attachmentid=3877298&d=1474046912
---------- Post added at 09:15 PM ---------- Previous post was at 09:12 PM ----------
also just to let you guys know, rooted it with twrp_3.1.0-1_sm-t710 and magisk v12
Click to expand...
Click to collapse
It's been like a year since I used odin so would you mind sharing the step by step instructions you followed to update from 6.0.1 to 7.0 and to root it with magisk?
Thanks!
any issues with wifi 5g for North America? seem to remember having to change router channels last time i did this for 6.0...
Znil said:
It's been like a year since I used odin so would you mind sharing the step by step instructions you followed to update from 6.0.1 to 7.0 and to root it with magisk?
Thanks!
Click to expand...
Click to collapse
First, you need to get Samsung USB Drivers from Here
then get odin from my link in the post, backup all your data because your internal sdcard will be wiped clean
power off your tablet, hold the home button, vol down and power it up, press vol up when asked to continue to Download Mode
Now, run Odin 3.12 and connect your device, you should see Added!! on the left side, extract the rom zip where you'll end up with 3 files (AP,BL,CSC), select the 3 files in their respective slots (AP will take some time) but when you're done, press start and wait for the tab to boot up
for rooting, download this twrp recovery: https://www.androidfilehost.com/?fid=529152257862710032
and download Magisk v12 from here: http://tiny.cc/latestmagisk
copy the magisk zip to your tab, power it off and again enter download mode, connect the tab and run odin, select options (2nd tab) and untick Auto Reboot, select the twrp in AP slot and click start
Once it says pass, hold down Power button and vol down to power off the tablet, but you'll have to quickly enter recovery mode by pressing the home and vol up button along with the power button.
Once in twrp, swipe to allow modifications, click install, browse to the magisk v12 zip file and install it, reboot to System and download magisk manager from play store.
Read all about magisk here
twrp thread here
lemme know if you need anything else
nolook said:
any issues with wifi 5g for North America? seem to remember having to change router channels last time i did this for 6.0...
Click to expand...
Click to collapse
Was just coming here to pust this. No 5GHz for NA, so we will need to hold out for a working copy. If you are intending to root it can be fixed, but I don't intend to.
Will it work on T715 Barnes Noble version?
Sent from my VS995 using Tapatalk
gordec said:
Will it work on T715 Barnes Noble version?
Sent from my VS995 using Tapatalk
Click to expand...
Click to collapse
There is already a T715 version which appeared even earlier yesterday. That one is for Italy, but it should be fine.
Anybody else having issues with their Samsung account after rooting the tablet? I can't seem to be able to connect anymore after rooting, also for other users of SD maid: do not clear anything, it seems that one of the app's options breaks auto brightness and auto rotation.
Dariusdd said:
There is already a T715 version which appeared even earlier yesterday. That one is for Italy, but it should be fine.
Anybody else having issues with their Samsung account after rooting the tablet? I can't seem to be able to connect anymore after rooting, also for other users of SD maid: do not clear anything, it seems that one of the app's options breaks auto brightness and auto rotation.
Click to expand...
Click to collapse
how did you root the tablet? supersu I presume, if yes then that's why it's breaking the brightness and wifi, root with magisk because i remember the note5 and s7 had the same issues when supersu wasn't updated and the ramdisk kept interfering with the drivers
Ather said:
how did you root the tablet? supersu I presume, if yes then that's why it's breaking the brightness and wifi, root with magisk because i remember the note5 and s7 had the same issues when supersu wasn't updated and the ramdisk kept interfering with the drivers
Click to expand...
Click to collapse
I hoped that was the case, so I ended up clean flashing again and rooting with magisk last night, thinking that being a little newer it should work with Samsung's Android N.
I didn't have any issues with SuperSU either for several restarts, so I assumed it might've been because of SDmaid clearing the wrong stuff. Either way, I'll try backing up my /data before trying again, so that I won't have to reset the tablet for the 3rd time in case that was also related. LE: even after several reboots after clearing stuff with SD maid, I have yet to experience the difficulties I had while using SuperSU. Magisk is fine.
Also: I managed to make my Samsung account work properly now. I reset the "Samsung Account" application to its initial state (through SDmaid, but it might work with other stuff as well) and it let me log in properly.
Ather said:
First, you need to get Samsung USB Drivers from Here
then get odin from my link in the post, backup all your data because your internal sdcard will be wiped clean
power off your tablet, hold the home button, vol down and power it up, press vol up when asked to continue to Download Mode
Now, run Odin 3.12 and connect your device, you should see Added!! on the left side, extract the rom zip where you'll end up with 3 files (AP,BL,CSC), select the 3 files in their respective slots (AP will take some time) but when you're done, press start and wait for the tab to boot up
for rooting, download this twrp recovery: https://www.androidfilehost.com/?fid=529152257862710032
and download Magisk v12 from here: http://tiny.cc/latestmagisk
copy the magisk zip to your tab, power it off and again enter download mode, connect the tab and run odin, select options (2nd tab) and untick Auto Reboot, select the twrp in AP slot and click start
Once it says pass, hold down Power button and vol down to power off the tablet, but you'll have to quickly enter recovery mode by pressing the home and vol up button along with the power button.
Once in twrp, swipe to allow modifications, click install, browse to the magisk v12 zip file and install it, reboot to System and download magisk manager from play store.
Read all about magisk here
twrp thread here
lemme know if you need anything else
Click to expand...
Click to collapse
Thanks man, I really appreciate the explenation. It worked perfectly!
Znil said:
Thanks man, I really appreciate the explenation. It worked perfectly!
Click to expand...
Click to collapse
glad i could help

Categories

Resources