Download Mode Problem - G2 Q&A, Help & Troubleshooting

Hello Everyone,
I have LG G2 but do not know which one model. Recently I have discovered that my phone hardware have been changed after opening the back case. My phone was working flawlessly but i found Lollipop update in PC LG PCsuit. I then update my cell phone but in lollipop my cell phone did not recognize SIM CARD.
I tried different KDZ to refresh my phone but then started facing touch problem. Phone Touch do not accept any thing(touch).
Again applied another KDZ but this time my phone is stuck in boot and when i try to enter to DOWNLOAD MODE it directly goes to fastboot: processing command. Even when i connect charger it directly prompt to fast: processing command
Main Problem:
My phone is stuck in boot and do not boot to Android OS.
Tried to go to DOWNLOAD MODE but it goes to FASTBOOT: PROCESSING COMMAND directly.
It is not recognized by ADB also.
I have tried LG G2 D803, D802 and D801 KDZs so far but nothing works. Anyone please suggest any KDZ of any version OS to deploy on G2 to work properly.
Your reply regarding will deeply be appreciated.

If you can't identify your hardware, try to use this site to do it by IMEI (you can see that on the phone box or removing the back cover, search YouTube if you don't know how to do it): devtester.ro/projects/lg-firmwares. Then use the same site to download the kdz for your phone model.

Felipe_PS said:
If you can't identify your hardware, try to use this site to do it by IMEI (you can see that on the phone box or removing the back cover, search YouTube if you don't know how to do it): devtester.ro/projects/lg-firmwares. Then use the same site to download the kdz for your phone model.
Click to expand...
Click to collapse
Bundle of thanks............................................. Bravo....

shafiqonline said:
Bundle of thanks............................................. Bravo....
Click to expand...
Click to collapse
dont rely on those as they can manipulate those as well you need to see under the motherboard thats the only way to be 100% sure..
heres video i think and thread
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195

Related

[Q] KDZ Flash issues

Hello everyone,
So I basically made a noob mistake. I had a custom recovery installed on my d802 and I opted to update the software via the LG apps. Now I am stuck at the LG logo on start-up. Normally this wouldn't bother me so much, but the problem is when I try to flash the original firmware with the flash tool. I have looked everywhere and haven't found a proper answer (forgive me if I missed a thread).
The problem is that I get an error saying your phone is disconnected when I'm pretty sure its not, and the phone screen displays "fastboot: processing commands". I have tried a different usb cable, a different pc with different version of windows. But unlucky so far.
Apart from this though, I was wondering if I could flash the Italy lollipop KDZ? I am in Germany and since I have the same model number (D802) I might as well give it a try. What are your thoughts?
Any help from you guys is highly appreciated.
alimzia said:
Hello everyone,
So I basically made a noob mistake. I had a custom recovery installed on my d802 and I opted to update the software via the LG apps. Now I am stuck at the LG logo on start-up. Normally this wouldn't bother me so much, but the problem is when I try to flash the original firmware with the flash tool. I have looked everywhere and haven't found a proper answer (forgive me if I missed a thread).
The problem is that I get an error saying your phone is disconnected when I'm pretty sure its not, and the phone screen displays "fastboot: processing commands". I have tried a different usb cable, a different pc with different version of windows. But unlucky so far.
Apart from this though, I was wondering if I could flash the Italy lollipop KDZ? I am in Germany and since I have the same model number (D802) I might as well give it a try. What are your thoughts?
Any help from you guys is highly appreciated.
Click to expand...
Click to collapse
Hi!
Yes, I'm pretty sure you can flash the Italy .kdz, 'cause it's correspond, basically, to the open version. I think there is some bloatwares, but they can be remove by root. you can even flash the spanish .kdz, but there is vodafone's bloatwares inside.
But if you're stuck in fastboot, I don't know if you can access to download mode. Can you describe actual state or your phone? Do you have access to recovery? Download Mode? Can you boot?
casual_kikoo said:
Hi!
Yes, I'm pretty sure you can flash the Italy .kdz, 'cause it's correspond, basically, to the open version. I think there is some bloatwares, but they can be remove by root. you can even flash the spanish .kdz, but there is vodafone's bloatwares inside.
But if you're stuck in fastboot, I don't know if you can access to download mode. Can you describe actual state or your phone? Do you have access to recovery? Download Mode? Can you boot?
Click to expand...
Click to collapse
Whenever I try to move into download mode it automatically takes me to fastboot. I cant access recovery or hard reset. But yes the lg logo does come up and thats all, it evens goes as far as the second time the logo comes up and the leds come on. But thats about it. It shows download mode for a little while and then automatically goes into fastboot.
Thats all I have right now.
Well this is not pretty. I just realised my phone isn't getting into download mode. I was under the impression that getting into fastboot when connecting phone to pc is the normal case for everyone. But im supposed to get into download mode rather than fastboot, eh?
Now i'm really out of clues. Appreciate your help devs!

LG G2 - D802 - Bricked... need urgent help...

Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
qam47 said:
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
Click to expand...
Click to collapse
I got the same problem here after using MIUI and trying to get out of it.
Stuck in bootloop, no recovery, download mode stuck at first screen, phone not being detected by pc and no flashing led anymore.
Anyone help us please, my phone is out of warranty too
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Rayaxe said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Click to expand...
Click to collapse
Thanks for the reply.
But it says:
http://forum.xda-developers.com/showthread.php?t=2582142
VERY IMPORTANT!!!!!!!
You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone. The link above is for 10b_EUR_16G firmware version. So don't use those files if your firmware version was not that one. Instead you should look for img files corresponding to the current version installed in your phone. If you don't know what version you've installed then don't use this method because you will break your phone.
Click to expand...
Click to collapse
and i dont know which one to download.
Here is the link to Miui 6, I did install before crashing
http://forum.xda-developers.com/lg-g2/development/kk-miui-6-lg-g2-variants-based-stock-lg-t3106569.
...
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Rayaxe said:
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Click to expand...
Click to collapse
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
GoPogoOreo! said:
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
Click to expand...
Click to collapse
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Rayaxe said:
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Click to expand...
Click to collapse
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
GoPogoOreo! said:
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
Click to expand...
Click to collapse
samething with me please help

lg g2 trying to unroot

Hello all,
usually i deal with my problems by searching the forum, though this time i am really worried as i cant find anything to my help.
You see something went bad with the screen and because the phone is rooted, i cant get it fixed (it is still in warranty), nor can i use it (the touch sucks).
So i am trying to get it unrooted.
So i have downloaded LG mobile support tool and the drivers, i enter the phone to download mode and nothing happens. i get all the time errors. Also, in the lg mobile support tool, i see a software update. Should i do it? I cant though because the start upgrade button is greyed out, and the "LGD802" sign on the left pane is flushing like its trying to verify my g2. Also, should i wait for like 10 minutes or so when i enter download mode for the bar seen at the phone to be completed before the whole process? Lastly, the most of times the lg mobile support tool crashes on the pc.
Please help me folks... :/
spirios1992 said:
Hello all,
usually i deal with my problems by searching the forum, though this time i am really worried as i cant find anything to my help.
You see something went bad with the screen and because the phone is rooted, i cant get it fixed (it is still in warranty), nor can i use it (the touch sucks).
So i am trying to get it unrooted.
So i have downloaded LG mobile support tool and the drivers, i enter the phone to download mode and nothing happens. i get all the time errors. Also, in the lg mobile support tool, i see a software update. Should i do it? I cant though because the start upgrade button is greyed out, and the "LGD802" sign on the left pane is flushing like its trying to verify my g2. Also, should i wait for like 10 minutes or so when i enter download mode for the bar seen at the phone to be completed before the whole process? Lastly, the most of times the lg mobile support tool crashes on the pc.
Please help me folks... :/
Click to expand...
Click to collapse
Where did you buy it, it sounds like the symptoms of a frankenphone. There is a post about it, some sellers flash d802 firmware on a d800 and it causes similar problems with screen, IDK about the LG mobile flash tool.
.
3r4s3r said:
Where did you buy it, it sounds like the symptoms of a frankenphone. There is a post about it, some sellers flash d802 firmware on a d800 and it causes similar problems with screen, IDK about the LG mobile flash tool.
.
Click to expand...
Click to collapse
I bought it 1 year ago, although i immediately flashed cloudy's rom. i cant understand though why every now and then the screen becomes unusable.
spirios1992 said:
I bought it 1 year ago, although i immediately flashed cloudy's rom. i cant understand though why every now and then the screen becomes unusable.
Click to expand...
Click to collapse
If you are brave enough you could try taking it apart and swabbing all the conections, I don't know if that would help but some people say it helps them. And the screen could just be faulty, you never no, before I took it apart I would try reflashing rom, doing the stock touch firmware update thing, then if it still don't work try flashing a kdz for the model number physically inside your phone not the one in the system info, and then I would take it fully apart, and put it back together then if it don't work, replace the screen.
the thing is i cant really interact with the screen to reflash the rom, its inresponsive. and my lg mobile support tool randomly crashes i hook my phone up the pc and it starts the download drivers part
spirios1992 said:
the thing is i cant really interact with the screen to reflash the rom, its inresponsive. and my lg mobile support tool randomly crashes i hook my phone up the pc and it starts the download drivers part
Click to expand...
Click to collapse
Try a different computer, you could use a USB otg cable to hook a mouse up to your phone if your having issues with touch screen to reset it.
try in different pc and differenrt dll

Fastboot issues and corrupted download mode.

I recently got my hands on a bricked LG G2 D800 because i thought i was deemed unbrickable. I got the device the backlight showed life and that was about it. i managed to somehow get (this method i think) it to boot to the LG logo and than it jumps to fastboot mode.
Yea me!!! I got fastboot and this phone is as good as fixed. NO! fastboot does not work. It will absolutely not execute a command besides "fastboot devices" to which it brings up a fastboot device. Since i got fastboot my plan is to follow this thread to recover the device. i updated all drivers that i need for this device, nothing. Plain and simple, there is an issue getting fastboot to execute command. the commands appear on the device but it doesn't advance further.
Download mode. Yeah i get the download mode that I get is a "security error" so its not the traditional download mode. if i get download mode i can flash a .tot right? Wrong. Fails due to "model information check". i got the phone to appear under COM41. The .tot file is 'LGD800AT-01-V20c-310-410-FEB-02-2014+0.tot'. Drivers does not seem to be the issue at hand, unless maybe its the ADB/fastboot drivers which i also updated to newest version.
The next thing im contemplating if this method is worth the shot. I have it booting to fastboot. I will probably do this since its probably the only thing left to try. Going to set up linux now so i'll report back.
Any help/insight will be appeared and properly thanked for.
I also got security errors on an 802. I was about to leave the phone in download mode and ran the LG Mobile Support Tool to perform an upgrade recovery to get a stock LP ROM onto the phone.
audit13 said:
I also got security errors on an 802. I was about to leave the phone in download mode and ran the LG Mobile Support Tool to perform an upgrade recovery to get a stock LP ROM onto the phone.
Click to expand...
Click to collapse
Link(s)?
I just downloaded the LG Mobile tool from LG Canada. Just search for the d802 and download the program. The program should detect your phone and download the correct firmware.
http://www.lg.com/ca_en/support/software-manuals
I actually have the d802 and it worked with the LG mobile program from the Canadian website.
audit13 said:
I just downloaded the LG Mobile tool from LG Canada. Just search for the d802 and download the program. The program should detect your phone and download the correct firmware.
http://www.lg.com/ca_en/support/software-manuals
I actually have the d802 and it worked with the LG mobile program from the Canadian website.
Click to expand...
Click to collapse
worth a try i guess. thanks.
Good luck. I hope it works for you. Report back with your results.
audit13 said:
Good luck. I hope it works for you. Report back with your results.
Click to expand...
Click to collapse
No luck :/ wont detect phone. and i have proper drivers installed.
Are you using Win7?
audit13 said:
Are you using Win7?
Click to expand...
Click to collapse
nope windows 10
I restored my phone using Win7 and I think there are some LG programs that do not work properly with Win8/10. I think one tool is the flash tool.
Does anything appear in Win10's device manager when the phone is connected?
audit13 said:
I restored my phone using Win7 and I think there are some LG programs that do not work properly with Win8/10. I think one tool is the flash tool.
Does anything appear in Win10's device manager when the phone is connected?
Click to expand...
Click to collapse
more info here in my other thread http://forum.xda-developers.com/lg-g2/help/type-brick-t3198437 1st and 3rd post

Lg g2 ls980 bricked (only white lines on screen )while installing recovery by autorec

While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
prnv said:
While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
Click to expand...
Click to collapse
i would suggest just to be sure before you can do more harm.. to post and ask in the goign back to stock thread.. you will get help there
Same issue
I have the same story with my LG G2 D802 any luck?
I have the same issue... Please give updates on your progress
I have Got The Same Issue.....no COM port so as to flash tot, i cant also flash using flash tools. Somebody Help
Same here, you guys burn your G2?
Looks like I'm a bit late for the party. Well i ended up my lg g2 ls980 (sold as d802) in the same condition. I fixed it by booting into qhsusb_bulk mode by shorting the capacitors and using srktool. Now my phone can boot into download mode!
(Note: this method only works if your phone shows up as qhsusb_bulk and not qdloader or something like that)

Categories

Resources