Currently I have an S5 Verizon with a rom stock lollipop and what I want is to change the number of voice mail has verizon * 86 by the company CLARO telephone which is * 80 but at the time of change tells me that is not I can do it, is there any way to change this number from any configuration files or a local SQL database, or someone who can give me some solution.
In advance thank you very much for your help fellow.
Related
Hi!
I'm thinking about using my M1000 with my company's Sim.
Problem is that to dial personal numbers I would need to add "46" before the number I am dialing (this is for cost control... the company pays for phone call of collegues and clients, I pay for my personal ones).
Now, I am afraid that due to this restriction I would not be able to tap a personal contact number and have it dialed and also that I would need to delete the whole number from the phone display in order to add the 46 at the beginning.
Is there any application that would allow me to easily add the 46 in front of personal numbers before they get dialed?
THANKS!!!
Chris
Are you saying that you can't simply add the "46" to your personal phone numbers in your Contacts list? I just added "46" in front of a number in my contacts list and dialed it. It did not work on my network, but it did dial it.
I could but...
I could add the 46 in front but...
0) do it for all of my contacts its a long work...
1) It would be difficoult to revert should I change sim
2) I would get all my contact screwed if I try for example to dial from my PC or share them with someone
3) I don't need the "46" for SMS... so if I put it for SMS they would not go...
4) Incoming calls would not be recognized becouse the caller Id could not match the caller with the 46...
So it would be best if I could just add the "46" with a botton to the end of a number I would like to dial, just before I dial it...
Thanks anyway!
Chris
There a way I can intercept outgoing calls, for example I made a call from a contact that are stored like "+55 41 3338-6556" and before the phone start dialing I want change it to "014 41 3338-6556", just parse the world format number to another number, if this is possible I can do a program to use many operators or calling cards...
Any idea or a piece of source code?
Thanks
Arnaldo.
MagiCall can do this:
http://www.magisoftwarehouse.com/index.html
Any idea how to make it?
Dial patterns for Brazil
Hey, I have opened a thread on that on the HTC Wizard. I am widely interested in having such a solution because of the Brazilian networks. I keep switching between my 2 SIM Cards (Claro and TIM) and have to use different operator dial codes for each SIM card. It is a pain in the neck.
I am glad someone shares my misery
Please keep me posted if you happen to find a solution.
-Feaps®
giacomitti said:
Any idea how to make it?
Click to expand...
Click to collapse
You mean how to get the program to do that?
Just create a New Rule,
filter = Phone - Outbound
Phone # = enter it or select from your contacts
Then go to the 2nd tab (Action)
Action1= Change Number
Call to: enter in New number here
Then on the 3rd tab add your scheduling preferences e.g. only Tuesdays.
I will test MagiCall, but I want to do it in code to make a solution for me, I think my problem is the same of feaps I live in Brazil too, I need to change operator code and if I change the SIM Card I need to change all phone numbers...
Arnaldo.
Feaps,
MagiCall works great!
Try it:
http://www.magisoftwarehouse.com/
My configuration:
-Filter
Rule Type: Phone - Outbound
Filter type: All
-Operation
Action1: Change number
Action2: Do nothing
Call to: 014{phone}[-3,0]
Remember I am at Curitiba, I use Brasil Telecom, 14 is the operation code, I store my phone numbers in the format: +55 41 3338-5665 so when I can MagiCall change it to 014413338-5665, so you can make more than one rule, for each operator (TIM/Claro) and enable the rule you want!
Malatesta, thanks for help!
Giacomitti.
G-r-e-a-t!
WOW, it sounds terrific. I was out and just got back from an Int'l trip. I will give it a try right away!
Kudos to you all!
-Feaps®
Edit after testing: WORKS PERFECTLY!
Feaps,
I had changed my rule to:
Phone Outbound
Specific number
+55*
Change number
014{phone}[-3,0]
So when I dial from dial pad it does not change the number, and I had create another for 0800
Phone Outbound
Specific number
+550800*
Change number
{phone}[-3,0]
Remember put the 0800 rule first... It will work too...
Happy new year!
Giacomitti
More flexible, indeed
giacomitti said:
Feaps,
I had changed my rule to:
Phone Outbound
Specific number
+55*
Change number
014{phone}[-3,0]
So when I dial from dial pad it does not change the number, and I had create another for 0800
Phone Outbound
Specific number
+550800*
Change number
{phone}[-3,0]
Remember put the 0800 rule first... It will work too...
Happy new year!
Giacomitti
Click to expand...
Click to collapse
I really like your new approach, 'coz I can then create a rule for international numbers that are not necessarily starting with a + (e.g. 1-800-222-3421) to add 0015 in front of the "1"...
You may say it is easier just to edit these numbers and add a +, but most of them are auto synched via Plaxo or LinkedIn and then I cannot edit them effectively without having duplicates...
Very nice the use of wildcards and so. I will give the help a try.
Have a great 2007!
-Feaps®
New version coming...
Giacomitti,
Please expect a version in Portuguese anytime soon
I am almost finishing it and the folks at MagiCall will recompile it.
This is hell of a great App!!!
-Feaps
Cool! But I use all my apps in english... But it's a nice feature!
It's the best app I had in my pocket.
Hi All,
Great site!!
I have 2 questions:
1 - When I use smart dialing from my hermes I use the direction arrows once I have found the contact and choose the work number of a contact that has an extension as +1 (999) 999-9999 x 9999 I then get a dialog saying "Invalid entry, please try again."
This same entry dials fine from speed dial or dialing from contacts, any suggestions, it's a real pain to manually dial the whole number.
2 - I have my numbers in outlook 2003 and they are formatted with the +country code format, so all numbers have a + in front of them.
When I smart dial, I can't see the last number of the phone number it only shows
+1 (xxx) xxx-xxx
Again it's really annoying as the only way I can find the number is by dialing and I usually use the smart dial to find a phone number when I am looking for someone's phone number.
BTW I have tried to edit the number and remove the + but outlook put's it back. This is actually good when travelling.
Thanks in advance,
I apologise in advance if this information is somewhere on the site, I am not lazy and I did read quite a bit before posting.
ROM version: 2.15.502.3
WM5
on my outlook, I have the phone num , ext and the phone will dial and wait for pickup before dialing the ext.
of course, i am not using the country code feature, so...
I would be happy with that behavior.
If I could change the font to be smaller in the phone application at least I could see the whole number.
Thanks for sharing.
Hi everyone. I purchased a sanyo incognito phone, successfully activated it and followed a guide i found here on how to pfash evo to Boost Mobile. I followed all steps without any problem. Did a copy o all correct nv items, copy of nam from donor phone to evo. I successfully zeroed all location (flashed to RUU_SuperSonic_S_Sprint_WWE_3.29.651.5_Radio_2.15.00.09.01_NV_1.77_CNV_release_150224_signed and then unrevoked3), did restart and found at ##786# all zeroes in mein and esn. Then successfully write donor MEID (esn was generated correctly and writed by itself). Then i put HA and AAA passwords into the phone.
What i've got now - is fully working internet with 3g (i'm not sure, but speed sems to be pretty fast), however voice and text messaging are not working. Text messaging showing error code 97 class 2, and when I'm trying to call someone i got a srange message from operator (i believe from sprint) - i attached it.
The only thing happen strange to me - when i tried to write all aaa and ha passwords with 0 profile in QPST Service Programming andter flashing it whowes me an error something like ESN has been changed or something.. However i found this on google and somebody wrote that i shouldn't worry about that - all information was written successfully.
In settings about the phone i see next information:
MEID: donors meid
Phone number: correct phone number as on the donor
IMSI: some numbers?
current username: boost mobile user name
prl 60683'baseband 2.15.00.01.01
What am I doing wrong? Any help would be gratefully appreciated! I just don't know what to do - i didn't find similar problem on the whole internet! Maybe i was looking wrong?
Thanks for everyone in advance.
and here what I've got in QXDM after writing correct meid into the EVO - check attached picture
should DIAG TX items be zeroes?
grushko said:
and here what I've got in QXDM after writing correct meid into the EVO - check attached picture
should DIAG TX items be zeroes?
Click to expand...
Click to collapse
Have you done a factory reset, and re-input the ha aaa passwords. And all other info in service programming? Had to do it with two phones cause i counldnt receive incoming calls or texts. After a factory reset. Then the fresh write, all worked. I cancelled the ota but let it kick in after final reboot. Might be worth a try.
grushko said:
and when I'm trying to call someone i got a srange message from operator (i believe from sprint) - i attached it.
Click to expand...
Click to collapse
If Sprint is saying Error Code 16 Switch number whatever and is calling a representative. Your EVO has been flagged. You'll need to let the call go thru answer their identity questions about your Boost account and they will clear it. I just did it 2 days ago. NOTHING else will clear the code 16, ONLY a Sprint Security Specialist can clear it. After they reset your Boost account the voice will work.
Hooray! I did it! It works now! Thank you everyone, and especially Dean_L. Next time when i called any number the system transfered to a representative who asked me a few questions about my account and then reset it for me. Now the phone calling is working. However text message still not working. Trying to resolve that problem now. Thanks again
Fixed problem with text messaging by calling customer service. They asked me what is the phone I'm using and i said Incognito - lie, but it worked!
The only thing left - is the MMS messages. I can recieve them, but can't send! Running miui latest rom. I changed MMS apn http://mm.myboostmobile.com (through voice dialer "Open A P N"), but no luck. Is any suggestions on this? Thanks.
Finally i found the fix. It's already been here, but i will post it again. The way to send MMS is to install Go SMS Pro from the market (it's free) and change in settings different mmsc address. The "Open A P N" method is not working. Or i installed SexynSmooth rom, which is sense rom and change mmsc by dialing ##DATA# - and it worked great for me. ANd exen long text messages works too (on miui they not working, unless you install gosmspro and change settings in it to manually partition them).
I love MIUI rom - so far it's the best one, but i don't want to use those forsk like installing different apps and not gonna be able to send long text messages. Hope they will change it in future versions and will app manual mmsc to their application.
Greetings excuse my bad English but use a translator would like to know if there is any way to change the voice mailbox number sprint samsung galaxy s4 L720 I really urgent and if possible remove that annoying message requires activation and activated this equipment in other town thanks