Related
I became so disgusted with Samsung while waiting for the 2.3.3 upgrade, I gave up a phone company in town upgraded my phone to 2.3.3 for me and it works great. I am happy about that, however KIES now says my phone is not able to be updated... I bought the phone from Vodafone Australia and the firmware looks like it is from Korea?? CSC:JVK (KOR).
Does anyone know how to fix this?? Must I change the firmware again?? The problem is that I have never seen a firmware that is Australia based.. Is it possible to change some setting to trick the phone into thinking that the firmware is from Australia and therefore allowing the updates to occur??
It can't hurt to ask...
Thank you for any replies...
You will have to reflash your phone if you want to get it back to an Australian firmware.
The KOR one is the generic Samsung (Korean company) firmware.
You can check out this web site http://fus.nanzen.se/ to see if your service provider has released a 2.3.3 firmware as yet.
If they have, you can use the CheckFusDownloader application from that site to download the firmware, and you will need to follow the instructions available in this forum to flash the firmware to your phone.
You can change CSC without reflashing (sometimes).
You just type a code into your phone on the dial-pad, utilising your IMEI code, (i think you type *#06# to find out IMEI).
Be aware, one you select a new option (If you have multi CSC on your phone) your phone will reboot and wipe itself with the new CSC. So i say this once and only once DO NOT DO THIS UNLESS YOU ARE FULLY BACKED UP, and/or also don't mind starting from fresh again.
For Galaxy S it is *#272*IMEI CODE#.
Also, my phone is updated to latest firmware and KIES does not recognise it. This is good, because Kies is bad. I'd advise to backup your stuff manually, it's not hard.
If you are using Galaxy S I9000, i strongly suggest getting to know how the program ODIN works. There are plenty of guides on here, and unless you're a total dweeb or seriously unlucky it's a very easy process and hard to balls up.
But, as always, make sure you know what you're doing.
You should be able to get JVT now over KIES.
Flake x
---------- Post added at 12:10 PM ---------- Previous post was at 11:50 AM ----------
Also, to my knowledge, it doesn't matter if you're on the wrong CSC.
The only problem you may encounter is that Market may have a different selection apps, and some may be undownloadable, other downloadable.
Basically, if keywords like 'flashing' and 'Odin' put the fear into you. It's ok, it doesn't matter. My phone ran on KOR CSC for 6 months without any problems, albeit i'm in UK.
Hope this is of some help.
EDIT:
AND i just found this post.
http://forum.xda-developers.com/showthread.php?t=787163
The automatic method will also work if the CSC for australia is not installed on your phone.
again, hope this helps
Flake x
Hi All,
I've just updated my Note 3 (9005) to KitKat 4.4.2.
Since updating everything is working except the sound.
In fact whenever a sound might play the phone hangs for a second.
Im certain ive flashed everything correctly, tried multiple ROM's but nothing fixes it.
Anyone have any ideas?
EDIT: After double checking, the modem/baseband file doesnt appear to have worked? currently showing MI6, what can i do to update it?
EDIT 2: After looking into it, this may be causing my issues....if anyone has the most up to date baseband for O2 UK then could they please send it?
Sammobile has the latest O2 firmware you can grab it from there.. Have you been able to flash back to 4.3 then?
OK, ive downloaded the latest O2 update.
This is in 1 single file, not the 4 that the KitKat update came in.
Can anyone tell me how to flash just the CP/Modem/Baseband from this one file??
EDIT: Flashed Modem.bin file through ODIN, flash completed successfully, but baseband still stuck at XXUBMI6, please can anyone tell me why this wont update?
JimmyVD said:
OK, ive downloaded the latest O2 update.
This is in 1 single file, not the 4 that the KitKat update came in.
Can anyone tell me how to flash just the CP/Modem/Baseband from this one file??
EDIT: Flashed Modem.bin file through ODIN, flash completed successfully, but baseband still stuck at XXUBMI6, please can anyone tell me why this wont update?
Click to expand...
Click to collapse
It could be that O2 have locked your handset? Only thing I can think of, off the top of my head... you can try the leaked firmware (link in my signature, if needed again) - it has the 4 files. Flash only the Bootloader, then the ROM itself and see. Note of warning, playing with bootloaders is a risky game, and you can brick very easy if it goes wrong.
EDIT: Yes the official XEO is 1 file not 4 files like the leak
Thanks for the speedy reply.
I've tried updating to 4.4 and that's how the sound stopped working?
So my bootloader has already been updated. Don't know how to check though?
Do baseband/modem/cp need to be updated sequentially? e.g. MI6-->MI7 etc.
Thank again for all the help!
JimmyVD said:
Thanks for the speedy reply.
I've tried updating to 4.4 and that's how the sound stopped working?
So my bootloader has already been updated. Don't know how to check though?
Do baseband/modem/cp need to be updated sequentially? e.g. MI6-->MI7 etc.
Thank again for all the help!
Click to expand...
Click to collapse
The baseband doesn't need updated sequentially no, you can go from MI to MK if you choose. It's probably O2's basband.
Can you dial *#1234# into your keypad and post the results ?
radicalisto said:
The baseband doesn't need updated sequentially no, you can go from MI to MK if you choose. It's probably O2's basband.
Can you dial *#1234# into your keypad and post the results ?
Click to expand...
Click to collapse
OK great, thats what i thought, maybe it is O2's baseband then....
Heres the results of *#1234#:
AP: N9005XXUENA6
CP: N9005XXUBMI6
CSC: N9005OXXENA5
Again, thanks very much for the help!!
JimmyVD said:
OK great, thats what i thought, maybe it is O2's baseband then....
Heres the results of *#1234#:
AP: N9005XXUENA6
CP: N9005XXUBMI6
CSC: N9005OXXENA5
Again, thanks very much for the help!!
Click to expand...
Click to collapse
Yup it's O2's baseband, - remind me again, you have root?
From what I can see, O2 are up to MJ in terms of baseband - Sooo we need to find you an up to date baseband to flash (modem basically) - Now modems can be tricky if you get it wrong or get the wrong one. Have a look around and see if we can find you a more up to date one.
You could (not saying you should) unlock your phone and then use the NA2 baseband which I currently use (I am also on O2 but with an unlocked handset) - Not 100% on Sim unlocking so you'd have to have a nose around and see what's what.
---------- Post added at 08:19 AM ---------- Previous post was at 08:17 AM ----------
Also need to Note, Sound issue may indeed be hardware based, but we will see soon enough.
radicalisto said:
Yup it's O2's baseband, - remind me again, you have root?
From what I can see, O2 are up to MJ in terms of baseband - Sooo we need to find you an up to date baseband to flash (modem basically) - Now modems can be tricky if you get it wrong or get the wrong one. Have a look around and see if we can find you a more up to date one.
You could (not saying you should) unlock your phone and then use the NA2 baseband which I currently use (I am also on O2 but with an unlocked handset) - Not 100% on Sim unlocking so you'd have to have a nose around and see what's what.
---------- Post added at 08:19 AM ---------- Previous post was at 08:17 AM ----------
Also need to Note, Sound issue may indeed be hardware based, but we will see soon enough.
Click to expand...
Click to collapse
I thought as much TBH.
I am rooted, i've downloded the latest O2 update and tried to flash the firmware but it didnt take, im still stuck at MI6.
I'll see what i can do re: unlocking the phone.
If you can find a more updated Baseband from O2 i would be eternally grateful!
Thanks,
ZIP: https://mega.nz/#!RCYgUJbS!f2YuYaBNrb4QNsPc0xURGnRCmhRkGNxveB57XHWK0OY
AP: https://mega.nz/#!FfYDhQ5I!iqOMRJ1IgZJVD4OBycEmDTN8NvWkiUvfpnoA1oXTIBc
BL: https://mega.nz/#!AbIUTSgA!m-XVKhtuMie4LcK5g0Xz1aLsDOg5Iho2I3dL8_dsEo8
CP: https://mega.nz/#!oXAQXZzD!TjYfs-db_9Q8C80jqjVK3YcKhYsGj1Vy0ETPFHYHApA
CSC: https://mega.nz/#!5CxWhTAZ!KgzHDEVeAztMTSZx1wPJxB78bAmGB4G6WxMsq5zI8Dk
HOME CSC: https://mega.nz/#!cGBCDZKb!XjuP6bPcoVqnSutJDMeoPlXXcPTmAH1wKQho5VGsR_w
I just installed CP and BL files for G930T QE1 and AP and CSC files from here,
Rooted with mix of Goodroot by @Quickvic30 and Nougat_S7_Root_2_82_All_Carriers_V1.zip by @jrkruse (used supersu from v1.zip and root script from goodroot, edited root script lines to point to 2.82 apk), installed kernel auditor and set both cpu govenors to ONDEMAND, WOWWW, MY PHONE is completely **** free, rooted, faster than ever, no more lagging whatsoever, and just feeling so great of a device that I always knew it is but never felt by its performance.
Thanks @muniz_ri, He has always posted many firmwares that I used, I just was in process of upgrading my S7 yesterday, didnt see this updates posted by him and had to wait 4+ hours to get it from SamMobile, so I just uploaded to mega myself, hope it helps anyone.
use rar or zip please not all people have good internet !
popmpopm said:
use rar or zip please not all people have good internet !
Click to expand...
Click to collapse
Added ZIP
I'm a nood to this, I want to use whatsapp+ however 930u has the default whatsapp installed and I can't install plus. Is there a way to remove it from the system? Thanks in advance for the assist
The BL and CP link provided is already the TMO version of the modem. No need to find an flash TMO modem separately for VOLTE, 4x4mimo, etc to work ? I am not looking to root. Just want to have a bloat free firmware.
vinberry said:
The BL and CP link provided is already the TMO version of the modem. No need to find an flash TMO modem separately for VOLTE, 4x4mimo, etc to work ? I am not looking to root. Just want to have a bloat free firmware.
Click to expand...
Click to collapse
In the same boat as you. Have the G930T and it is so bloated and annoying. Samsung all up on my grill:crying:
Downloading the zip and going to flash this phone asap. Looking forward to G930U~
---------- Post added at 11:50 PM ---------- Previous post was at 11:37 PM ----------
Wait. Will this trip knox?
---------- Post added at 11:58 PM ---------- Previous post was at 11:50 PM ----------
I mean, this is the Sammobile unedited files, right?
---------- Post added 29th June 2017 at 12:13 AM ---------- Previous post was 28th June 2017 at 11:58 PM ----------
Said "error" with a triangle and an android hanging from it (x.x)
Then restarted and said "erasing".
Now it has a lock within a rotating circle... been like this for a while...
---------- Post added at 12:15 AM ---------- Previous post was at 12:13 AM ----------
Now says installing applications...
---------- Post added at 12:17 AM ---------- Previous post was at 12:15 AM ----------
Nice, booted up and says SM-G930U
Everything valid (knox, SE, sec).
Will check it out with calls and all
---------- Post added at 12:20 AM ---------- Previous post was at 12:17 AM ----------
Question: how do I de-bloat this sucker? I don't like all of these samsung apps on here...
I have not receive my S7 yet, waiting for them to ship to me. I am curious how did it go with you. Are you able to use Radio, VOLTE, wifi calling, mimo, etc. In regard to the Samsung Bloat, the only way is to root and uninstall. How's the performance and battery wise. Thanks for your feedback. . Hope to get my phone by next week.
OK, to clear some things up,
THIS IS OFFICIAL SAMSUNG.
I believe it does not trip knox if you are not planning to modify system. If you are please follow root guides.
BL and CP are from G930U, in my case I just flashed them and they are working more than good enough for my purposes, but if you prefer TMO ones, please grab them from https://forum.xda-developers.com/tm...ware-g930t-qe1-android-7-0-5-27-2018-t3613122 thread by muniz and thank him for uploading them.
about usage: Battery life is excellent, however I am rooted so I had to flash engineering boot image, Which of course makes phone lag, but I took care of lag using Kernelauditor and setting CPU to ondemand. I let kernelauditor do its thing whenever I restart phone by leaving it alone for 2-3 minutes. after that I can not see any difference in performance of Stock 930U and rooted 930U. Adfree is a MUST for me so I love root. Try that and decide for yourself, Oh I love samsung feature that puts background apps to sleep. I think it has given huge battery boost and I go thru day with moderate usage easily.
hapa8o8 said:
[/COLOR]Question: how do I de-bloat this sucker? I don't like all of these samsung apps on here...
Click to expand...
Click to collapse
If you want stock android experience, I did it on my galaxy s7edge, flashed the custom ROM from FlashFire. Please refer to this thread for more info: https://forum.xda-developers.com/tmobile-s7-edge/development/rom-t3572739
It totally worked for me and I am not going back, but I dont think that rom is available for S7, wouldn't hurt requesting if you really want it.
@nanunoran .....TY for clarifying the files. and ty for providing the link to the TMO modem.
Hello everyone, I am using G930T and already converted to G930U running QC1 (April 1. 2017) version of 7.1. What is the easiest way to update to QD2 with baseband ending in QC1? I prefer not having to re-install all apps and loose data as I have no root. Checking for updates doesn't bring up the notification that update is available for download/install. Thank You for your help.
coolmen777 said:
Hello everyone, I am using G930T and already converted to G930U running QC1 (April 1. 2017) version of 7.1. What is the easiest way to update to QD2 with baseband ending in QC1? I prefer not having to re-install all apps and loose data as I have no root. Checking for updates doesn't bring up the notification that update is available for download/install. Thank You for your help.
Click to expand...
Click to collapse
Here is what i would do
1. Download matching G930U CP file from one of threads in this forum and odin it. So all of your firmware parts are now matched. You cannot get OTA update if firmware is hybrid.
2. Do OTA to update your G930U firmware to the latest one.
3. Then odin latest G930T CP file from another threads here in the forum.
Dont forget to wipe cache to avoid problems or issues.
Before you do everything above, i would say wait a day or two since another G930U is soon to be out anytime now. Check sammobile.
Hope above helps.
Anyone else having a problem with the fingerprint scanner? Please help...
FitTerminator said:
Anyone else having a problem with the fingerprint scanner? Please help...
Click to expand...
Click to collapse
Fingerprint work for me.
Anyone having issue with samsung pay?
I did what the origin author did but without root (at least not yet).
Flash:
G930T QE1 for CP and BL files (CP_G930TUVS4BQE1 and BL_G930TUVS4BQE1)
G930T QE2 for AP and CSC (AP_G930UUEU4BQE2 and CSC_OYM_G930UOYM4BQE2)
I follow the instruction and able to flash U version with no issue. I have been using it since. I also flash the TMO version of the CP files and I am able to get VoLTE and WIFI calling. I did not experience any fingerprint issue or samsung pay issue.. However, My problem is that the U version camera does not have the shutter sound options to turn off. The Tmobile version have that option within the camera settings. Can I somehow get the TMO version of the camera app and odin it or sideload it. If so, where can I get it.
And to be quite honest, the TMO version doesn't really have that much bloatware in compare. Just a few TMO apps. Trust me, I use to be with ATT and their phones are bloat cancer.
@vinberry,
Which BL did you flash? Can you posh all the version of each file you flash with? thanks.
@gundamdx. I flashed the U version of BL, AP, CSC files as provided by @nanunoran and flashed the TMO version of the CP file. I have no problem with SPay. Also, if you are looking to unlock you sim, you need to do it while you are still in tmobile firmware and use their unlock app. The app doesn't work in the U firmware. It will indicated something like device not qualify to unlock. remember what I mentioned about the camera shutter sound if that's something that would bother you.
nanunoran said:
OK, to clear some things up,
Oh I love samsung feature that puts background apps to sleep..
Click to expand...
Click to collapse
If you love that feature...check this out. This is the most current version that can be installed on our API 24 from apkmirror. When you install this on top of the existing device maintenance feature, it allows you to completely put just about any user app to sleep for good! It adds another section under "Battery" called "Always sleeping apps".
Description: "Select apps that will be put to sleep immediately when they aren't being used. Always sleeping apps will never run in the background. They may not receive updates or send you notifications"
http://www.apkmirror.com/apk/samsun...ce-maintenance-1-0-26-2-android-apk-download/
worked great on my device. thank you for taking your time to help others.
vinberry said:
@nanunoran .....TY for clarifying the files. and ty for providing the link to the TMO modem.
Click to expand...
Click to collapse
Please confirm if you need help
Will it work on the galaxy s7 model from cricket wireless, It's the model SM-G930AZ
I really want to install other firmware because cricket just tales too long with the updates of software
hello. please can anyone help me to find the last firmware italian nobrand flashable and tell me if this is the last? i installed before samsung official update and i have some problems.... can even tell me if this is the last? and give me the link for downloading and the procedure to install?
thanks
versione banda base: G950FXXU1CRAP
Kernel: 4.4.13-12993647-QB16754748
Vers. build: R16NW.G950FXXU1CRAP
Livello patch sicur: 1 feb 2018
vers. softw.: SAOMC_SM-G950F_OXM_ITV_00_0012 ITV ITV ITV
www.updato.com
---------- Post added at 08:26 AM ---------- Previous post was at 08:25 AM ----------
www.updato.com
can please answer and tell me what is my download firmware and if my actual is the last?
and if i avoid warranty if install the new downloaded?
thanks many
THIS is the newest version for italian unbranded g950f devices. I believe you already are on this firmware.
And no your warranty is not void if you simply flash an official firmware.
Based on this search:
yours must be in this link:
https://updato.com/firmware-archive-select-model?record=19E8AE841DD011E89F15FA163EE8F90B
also in that link contains how to flash the firmware.
after you extract it, there will be couple of files, just be careful, put the HOME_CSC_OLE on Odin's CSC field.
do not put CSC_OLE there.
Last help please. In my actual rom already oreo, can i do the steps to flash without risk bootloop?
I thank you very much fir patience
Yes you can flash this without risking a bootloop, but thats exactly the firmware you already have? it would make no sense at all, as you're allready on the newest firmware.
I thank you... But i am afraid that something gone bad when i flashed update... WhatsApp often crash when i send images and others.... I hope to solve with new flash, wrong idea according to you? I already formatted resetted.... Please help me....
Very thanks
The whatsapp crash when trying to send photos is a known issue, try to google it (although it doesn't affect me)
the four options im aware of now are:
*live with the whatsapp crash, hope a future update will fix it
*try another firmware with another csc. As long as you don't need carrier spcific settings (like VoLTE,...) this shouldn't bother you. For instance with the BTU csc.
*go back to nougat and wait for a newer oreo update
*when you don't mind triggering knox 0x1 try a custom ROM like Renovate ICE, I never had problems with this ROM
*
Many thanks for patience, i hope another question from you... If i want install firmware oreo brand tim italy, ore go back to nougat... Can i di the same steps flashing from that website? After can i fkash going back and refkash without probkems if flash roms branded, unbranded or nougat and oreo? Please last help
Yes you can download whatever firmware you want from updato.com as long as it is for the model sm-g950f, it doesn't matter if its 8.0 TIM Italy/8.0 germany T-mobile/7.0 italy unbranded/...
As long as the model is right you can flash whatever you want/switch between Oreo and Nougat/switch between countrys and carriers/...
i thank you. you were very helpful for me. thanks from italy!!!!
No problem, greetings from austria
please, can help me yet? when i insert all 4 files in odin, the phone is seen from odin on com6 but the flash shown done in 1 second and the phone reboot. what wrong? thanks
i am on oreo official uk one but now i want to go back to my indian 7.0 firmware because of volte problem in btu so plzz help me and tell me the best way..without harming my device 935fd.
or can i flash 935fd india G935FXXS2DRCG noguat on
on uk G935FXXU2ERE8 ?
give me in private your serial number ,I will tell you wich rom its stock for your device...and I give you an advice,download the firmware using www.updato.com its more faster and you will find all firmwares for your device
Astra441 said:
i am on oreo official uk one but now i want to go back to my indian 7.0 firmware because of volte problem in btu so plzz help me and tell me the best way..without harming my device 935fd.
or can i flash 935fd india G935FXXS2DRCG noguat on
on uk G935FXXU2ERE8 ?
Click to expand...
Click to collapse
Download samfirm from here :
https://forum.xda-developers.com/attachment.php?attachmentid=3803841
Enter your model no. example SM-G935F
And region code: INS
And click check for updates, it will check for latest version available for your region. Then proceed to download.
If samfirm gives some error codes, then I guess you have to use updato or sammobile. Here is the link for updato https://updato.com/firmware-archive-select-model?record=C97F8A453DF911E89F15FA163EE8F90B
Sent from my S7 Edge using XDA Labs
shah22 said:
Download samfirm from here :
https://forum.xda-developers.com/attachment.php?attachmentid=3803841
Enter your model no. example SM-G935F
And region code: INS
And click check for updates, it will check for latest version available for your region. Then proceed to download.
If samfirm gives some error codes, then I guess you have to use updato or sammobile. Here is the link for updato https://updato.com/firmware-archive-select-model?record=C97F8A453DF911E89F15FA163EE8F90B
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
mate i want to know like i am on oreo stock firmware from uk but now i want to go ins firmware but in ins 7.0 is latest so if i downgrade from oreo to noguat is my phone get brick or in bootloop or odin give error bootloader one thats all because i can downgrade only u2 to u2 or u1 to u2 but not u2 to u1 but in ins firmware there is s2 not u2 thats why...
And i Flashed the 935f firmware on my 935fd model
Astra441 said:
mate i want to know like i am on oreo stock firmware from uk but now i want to go ins firmware but in ins 7.0 is latest so if i downgrade from oreo to noguat is my phone get brick or in bootloop or odin give error bootloader one thats all because i can downgrade only u2 to u2 or u1 to u2 but not u2 to u1 but in ins firmware there is s2 not u2 thats why...
Click to expand...
Click to collapse
You know I would have never advised anyone if I haven't tested myself. You can flash without any issues, but nougat will seem much laggy, don't know why. I just experienced it after downgrading that last nougat release for my region was much laggy then it was before I upgraded to oreo. But it may just be my imagination because oreo is more responsive and faster than nougat.
Nope S2 won't hurt. The thing is that the number after alphabet is same i.e 2. S2 is update from U2. 2 must be same. Also firmware is same for both F and FD models.
Sent from my S7 Edge using XDA Labs
shah22 said:
You know I would have never advised anyone if I haven't tested myself. You can flash without any issues, but nougat will seem much laggy, don't know why. I just experienced it after downgrading that last nougat release for my region was much laggy then it was before I upgraded to oreo. But it may just be my imagination because oreo is more responsive and faster than nougat.
Nope S2 won't hurt. The thing is that the number after alphabet is same i.e 2. S2 is update from U2. 2 must be same. Also firmware is same for both F and FD models.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
thanks i try but did i need to on oem unlock or not.
Astra441 said:
thanks i try but did i need to on oem unlock or not.
Click to expand...
Click to collapse
Yes always enable oem unlock, just in case you may need to flash custom recovery or root, just to be safe its good thing to always keep oem unlock enabled.
Sent from my S7 Edge using XDA Labs
shah22 said:
Yes always enable oem unlock, just in case you may need to flash custom recovery or root, just to be safe its good thing to always keep oem unlock enabled.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
everything oke but i can't make call even volte showing i can't make call even not reciving the msg also only net working...
Astra441 said:
everything oke but i can't make call even volte showing i can't make call even not reciving the msg also only net working...
Click to expand...
Click to collapse
Ain't happened with me, try changing your sim card. It isn't your phone's fault. If its registering network properly, then there is no issue with phone.
Sent from my S7 Edge using XDA Labs
my problem solved thanksss
please help me i have failed to downgrade back to 7.0 from 8.0 . phone model G935F
i want to downgrade because i lost network in upgrade and IMEI in service mode says status: NG
FRUMENCE said:
please help me i have failed to downgrade back to 7.0 from 8.0 . phone model G935F
i want to downgrade because i lost network in upgrade and IMEI in service mode says status: NG
Click to expand...
Click to collapse
mate make sure ome unlock is enable then use latest 7.0 of ur region make sure its u2 not u1 then use latest odin 13.1 to flash...
Astra441 said:
mate make sure ome unlock is enable then use latest 7.0 of ur region make sure its u2 not u1 then use latest odin 13.1 to flash...
Click to expand...
Click to collapse
will a firmware with this PDA work ? PDA; G935FXXU2DRB6
---------- Post added at 10:06 PM ---------- Previous post was at 09:50 PM ----------
FRUMENCE said:
will a firmware with this PDA work ? PDA; G935FXXU2DRB6
Click to expand...
Click to collapse
update; the U2 firmware worked now the next thing is how do i repair my IMEI and get network back?
any help ?
FRUMENCE said:
will a firmware with this PDA work ? PDA; G935FXXU2DRB6
---------- Post added at 10:06 PM ---------- Previous post was at 09:50 PM ----------
update; the U2 firmware worked now the next thing is how do i repair my IMEI and get network back?
any help ?
Click to expand...
Click to collapse
Try this https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516/
Sent from my S7 Edge using XDA Labs
shah22 said:
Try this https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516/
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
!!!!WARNING!!!!!! TOO LONG!!
Thank you for your help but this post did not work for me. After downgrading and trying many times to get imei i flashed the FACTORY BINARY but nothing i had lost modem and did not have baseband and NVDATA.
so with my heart rate @ a billion beats/sec with thoughts of i had bricked my phone. i clam down and started trouble shooting one by one .
At this point modem was undetected odin would fail to flash any firmware.
so i downloaded latest firmware 8.0. lucky it flashed and removed the FACTORY BINARY now back to stock 8.0 with no baseband and modem firmware. I did the following;
1. Flashed latest TWRP via Odin.
2.Formatted DATA then reboot back to TWRP (more drama ) your likely to face DM verify issue like i did here flash CF auto for android 7.0 but it wont give you root for some reason.
3.back to TWRP flash SuperSu for s7edge(SR1-supersu)
4.download the NVDATA,modem,and EFS for your device google search should yield.
5.flash NVDATA,modem and EFS. then factory reset the phone in TWRP
7.wait for many dramatic reboots,(reroot if you lost root)
8. then download and install ROOT BROWSER
still no network in my case at this point. i waited 20mins.
9.browse to the EFS folder in root. delete everything except **FACTORY APP**and **PROV-DATA**
10.do a full reboot
11.if no network like me, go to TWRP and factory reset.
12.sit back sip coffee and wait..
THIS IS WHAT WORKED FOR ME (G935F) i have since flashed back stock rom and rerooted and i have not lost IMEI again am now running a custom rom since 3hours ago still IMEI and network is strong. BE CAREFUL NOT TO BRICK YOUR PHONE I AM NOT RESPONSIBLE. DO AMPLE RESEARCH BEFORE ATTEMPTING THIS METHOD MAKE SURE ALL FILES ARE FOR YOUR DEVICE. ALWAYS KEEP LATEST STOCK ROM WITH YOU.
Could you tell me which rom should I flash on s7 edge locked to three UK? I bricked my phone. Don't have backup.
---------- Post added at 12:39 PM ---------- Previous post was at 12:29 PM ----------
Don't have a backup. G935F on three UK. G935FXXS2DRA9 is what sammobile shows. But due to a scam on their website I can't create an account for 'free' download. Could you send a link with another download? Thanks
Vitfit83 said:
Could you tell me which rom should I flash on s7 edge locked to three UK? I bricked my phone. Don't have backup.
---------- Post added at 12:39 PM ---------- Previous post was at 12:29 PM ----------
Don't have a backup. G935F on three UK. G935FXXS2DRA9 is what sammobile shows. But due to a scam on their website I can't create an account for 'free' download. Could you send a link with another download? Thanks
Click to expand...
Click to collapse
Use SamFirm to download firmware. Works great for me. I get full download speed.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
You can use any CSC code firmware, I don't know what your one came with. Could be any one of these:
http://prntscr.com/juh609
http://prntscr.com/juh7lq
benjamen50 said:
Use SamFirm to download firmware. Works great for me. I get full download speed.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
You can use any CSC code firmware, I don't know what your one came with. Could be any one of these:
http://prntscr.com/juh609
http://prntscr.com/juh7lq
Click to expand...
Click to collapse
I have a firmware but can't flash BL file in odin. All the rest of the files like csc, cp, ap, home work. Only bl doesn't. Message on the phone is sv. rev check fail.
Vitfit83 said:
I have a firmware but can't flash BL file in odin. All the rest of the files like csc, cp, ap, home work. Only bl doesn't. Message on the phone is sv. rev check fail.
Click to expand...
Click to collapse
Thats because you were flashing older bootloader version on a newer bootloader..
Download this https://updato.com/firmware-archive-select-model?record=6CF8552A10BC11E89F15FA163EE8F90B
Flash it using odin 3.13.1 , also be sure to use CSC file and NOT the home_CSC..
shah22 said:
Thats because you were flashing older bootloader version on a newer bootloader..
Download this updato.com/firmware-archive-select-model?record=6CF8552A10BC11E89F15FA163EE8F90B[/url]
Flash it using odin 3.13.1 , also be sure to use CSC file and NOT the home_CSC..
Click to expand...
Click to collapse
I was able to bring my s935f to life but unfortunately imei and signal is gone... Now, the fact is that I had same situation with my note5 in the past and...…. have given up due to lack of ideas how to fix such complicated thing like bringing back imei. Have tried all apps from play store-/rubbish. Even today I still have that motherboard in my drawer.
BUT s7 edge looks so great that I would take a chance to fix it if anyone my kind members could provide me with instruction explaining how to do this on basic knowledge level.
I know how to flash rom using Odin., how to install usb drivers, unlock oem, usb debugging,, how to flash twrp, root the phone...… but I struggle with the knowledge about 'pit file' (what the heck is that? because my odin 3.13.1 doesn't have pit file slot which I have seem on youtube movie....) ,I am confused with the fact that I can flash let say csc ,file in AP slot in din? Ums, …. Anotherwords wouldn't be a HUGE PROBLEM if the steps given on youtube or google work!!! But they don't!!! I mean my note5 here. So I am fully aware that simple looking instruction may bring a lot of hidden problems such as 'your rom flashed ok on youtube but my exactly the same phone and rom faild…. and now the Game starts when you read on google multiple solution and non of them work for you because you missed some small detail that wasnt mentioned in the movie because that was so obvious to creator. Looking back on my previous playing with roms I can say that IS ALWAYS SOMETHING ………. so I expect a lot of stress.
If YOU know or did it before how to make my phone great again, tell me please. Otherwise this pretty beast will end up mining electroneum.... Thanks