[SOLVED SEEING RELINK INSTEAD OF QUALCOM] HELP!! OS GONE and NO TWRP - OnePlus 2 Q&A, Help & Troubleshooting

UPDATE: SOLVED THE RELINK PROBLEM AND UNBRICKED MY PHONE
Hi can someone help..
my phone was rooted and I was trying to flash the latest OTA but I accidentally deleted the partition or something idk... so TWRP said no OS installed so I couldn't boot my phone.
And then i followed some guides around and then that turns into me cant access the TWRP anymore.
What I can do left now is get it into fastboot. Can anyone help how to get my OPT alive?
From what I've been reading I need to use 'fastboot flash update ____". is this right? but i don't have the file. or at least i think i don't. i downloaded 2.2.0 signed flashable zip but when i tried to c:adb> fastboot flash update OnePlus2Oxygen_14_OTA_011_all_1512111634.zip it said "error: cannot determine image"
All help appreciated!! I'm sorry if this problem has been asked before but I tried to search solutions myself but ended getting one problem after another so i decided to ask.. thank you.

first flash twrp
then boot into twrp
connect your phone to pc you will able to see your internal storage
copy your OS to internal storage
flash it

sudhakarstoopy said:
first flash twrp
then boot into twrp
connect your phone to pc you will able to see your internal storage
copy your OS to internal storage
flash it
Click to expand...
Click to collapse
This looks very promising but when i tried "fastboot flash recovery twrp-2.8.7.0-oneplus2.img" it "FAILED: device is locked. cannot flash images"

Did you try to unlock the boot loader again?
Sent from my ONE A2003 using Tapatalk

sudhakarstoopy said:
Did you try to unlock the boot loader again?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Is it the "fastboot oem unlock"? it didn't work "remote: oem unlock is disabled" is there another way?

Okay now tell me what you did after you wiped your OS unknowingly ? ..
Sent from my ONE A2003 using Tapatalk

sudhakarstoopy said:
Okay now tell me what you did after you wiped your OS unknowingly ? ..
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
I can't remember for certain but I think I went into TWRP and tried to flash the OTA update ONLY and not the full OS version (but by now there is already "No OS installed" message on TWRP) and when it didn't work i reboot system and couldn't get into twrp anymore.

https://forums.oneplus.net/threads/...-of-oxygen-os-2-0-for-oneplus-2.378300/page-2
Check this thread ... In 2nd page that guy have fastboot image get from him and try to flash the system image from fastboot ... All the best
Sent from my ONE A2003 using Tapatalk

sudhakarstoopy said:
https://forums.oneplus.net/threads/...-of-oxygen-os-2-0-for-oneplus-2.378300/page-2
Check this thread ... In 2nd page that guy have fastboot image get from him and try to flash the system image from fastboot ... All the best
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Thank you so much. Hopefully they see my message.
In the meantime, anyone has other fix to recommend? T_T

skarfy said:
Thank you so much. Hopefully they see my message.
In the meantime, anyone has other fix to recommend? T_T
Click to expand...
Click to collapse
With pleasure
Sent from my ONE A2003 using Tapatalk

sudhakarstoopy said:
With pleasure
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Apparently it's already uploaded here. Do you know how to fix it now?

http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Dont know if this could work?

skarfy said:
Apparently it's already uploaded here. Do you know how to fix it now?
Click to expand...
Click to collapse
This will work... Download every file. extract them and put it in a single folder .. Connect your mobile in a fastboot and try to flash every single file individually
Refer these commands but these are not for oxygen os just for reference
''fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot flash oppostanvbk static_nvbk.bin
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash userdata userdata_64G.img"
Sent from my ONE A2003 using Tapatalk

oediv said:
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Dont know if this could work?
Click to expand...
Click to collapse
I tried this, got stuck at step 7. Hoping for a reply on the thread.
sudhakarstoopy said:
This will work... Download every file. extract them and put it in a single folder .. Connect your mobile in a fastboot and try to flash every single file individually
Refer these commands but these are not for oxygen os just for reference
''fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot flash oppostanvbk static_nvbk.bin
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash userdata userdata_64G.img"
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Does the sequence matter or I can flash in any way I can?

skarfy said:
I tried this, got stuck at step 7. Hoping for a reply on the thread.
Does the sequence matter or I can flash in any way I can?
Click to expand...
Click to collapse
What happened at Step 7?
I unbricked my phone using that same guide.

tarun123t said:
What happened at Step 7?
I unbricked my phone using that same guide.
Click to expand...
Click to collapse
"7. The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install."
It said "the best driver is already installed" but I still can't find my phone in "MSM8994DownloadTool.exe".

skarfy said:
"7. The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install."
It said "the best driver is already installed" but I still can't find my phone in "MSM8994DownloadTool.exe".
Click to expand...
Click to collapse
have you tried manually updating the driver by selecting the file from QC folder?
---------- Post added at 07:53 PM ---------- Previous post was at 07:51 PM ----------
Step 6. Connect your OnePlus 2 to PC with USB cable. Then open ‘Device manager’. Hold volume + and power until your PC finds a new hardware (if it doesn’t work, try hold volume+ and volume- together). Now, find the item by the name of ‘QUALCOMM-HS USB Diagnostics 9006’. That’s your OnePlus 2.
Step 7. Now right click on it, and select ‘update driver’. Select ‘browse’ button and go to and select the folder where you extracted driver file’s in step 1. Update its driver using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder). Now this will install the new drivers for your Oneplus 2.

tarun123t said:
have you tried manually updating the driver by selecting the file from QC folder?
---------- Post added at 07:53 PM ---------- Previous post was at 07:51 PM ----------
Step 6. Connect your OnePlus 2 to PC with USB cable. Then open ‘Device manager’. Hold volume + and power until your PC finds a new hardware (if it doesn’t work, try hold volume+ and volume- together). Now, find the item by the name of ‘QUALCOMM-HS USB Diagnostics 9006’. That’s your OnePlus 2.
Step 7. Now right click on it, and select ‘update driver’. Select ‘browse’ button and go to and select the folder where you extracted driver file’s in step 1. Update its driver using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder). Now this will install the new drivers for your Oneplus 2.
Click to expand...
Click to collapse
Is this it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then I browse here "C:\Users\skrfy\Desktop\qc" and ticked "include subfolders". Is this right?
I did that step and it said already have the best driver installed. But my phone still doesn't appear in MSM8994DownloadTool

skarfy said:
I tried this, got stuck at step 7. Hoping for a reply on the thread.
Does the sequence matter or I can flash in any way I can?
Click to expand...
Click to collapse
Sequence doesn't matter
Sent from my ONE A2003 using Tapatalk

skarfy said:
Is this it?
and then I browse here "C:\Users\skrfy\Desktop\qc" and ticked "include subfolders". Is this right?
I did that step and it said already have the best driver installed. But my phone still doesn't appear in MSM8994DownloadTool
Click to expand...
Click to collapse
That's weird. Same thing worked for me a week ago.

Related

Bricked ZUK Z1 ?

Was able to wipe OS on my phone, now only ZUK Recovery menu is available. Boot stops showing white ZUK logo on screen.
ADB does not recognize the device.
Is it totally bricked now? or does there exist a solution?
I think you can still flash a factory image with the recovery, but I don't know how. By the way, how do you acces the fasboot menu ? Because I think it is still present on my bricked Z1 but I tried nearly every button combination to acces it, but never succeed...
I get to the ZUK Recovery menu by holding down both volume + and - for 10 sec at the moment phone vibrates at startup.
Hopefully there is a way to flash a recovery image. In the ZUK recovery menu there is an option to install update.zip, but I can't find a way to push the file to the device.
nordream said:
I get to the ZUK Recovery menu by holding down both volume + and - for 10 sec at the moment phone vibrates at startup.
Hopefully there is a way to flash a recovery image. In the ZUK recovery menu there is an option to install update.zip, but I can't find a way to push the file to the device.
Click to expand...
Click to collapse
Download qpst and the zui rom file and flash it and you should be good to go
qpst
https://mega.nz/#!4tom3DqL!4a-rRcLef1yS6HJSrBfne_-r9atg6yF3kI_HW8lDaPY
password: bbs.zuk.cn
zui rom file
https://mega.nz/#!chQkEAwR!IHeYRxWx38QdML6VxjPdVz08BgbZD-Z-xVuSG150qPU
Z1 usb driver (can be troublesome if doing this in windows 10 so try and use a win7 machine)
https://mega.nz/#!l8pVHIpT!UkcW3Jg4B7YilDjZatvLqGBi_R4vVUYVdkrsUL_Ve9k
If you dont know how to flash then ill try and guide you
After you installed qpst, you will get a bunch of programs, start QFIL from the qpst folder
Click browse on the programmer path row and select "prog_emmc_firehose_8974.mbn" and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone, you may need to select port and be quick with it, took me a few tries before I got it right so just take out the cable and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal
If everything went alrite then you soon got ZUI flashed on your phone and can install recovery etc
Good luck!
tndb said:
Download qpst and the zui rom file and flash it and you should be good to go
qpst
https://mega.nz/#!4tom3DqL!4a-rRcLef1yS6HJSrBfne_-r9atg6yF3kI_HW8lDaPY
zui rom file
uploading, will update as soon as the file is done
Z1 usb driver (can be troublesome if doing this in windows 10 so try and use a win7 machine)
https://mega.nz/#!l8pVHIpT!UkcW3Jg4B7YilDjZatvLqGBi_R4vVUYVdkrsUL_Ve9k
If you dont know how to flash then ill try and guide you
After you installed qpst, you will get a bunch of programs, start QFIL from the qpst folder
Click browse on the programmer path row and select "prog_emmc_firehose_8974.mbn" and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone, you may need to select port and be quick with it, took me a few tries before I got it right so just take out the cable and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal
If everything went alrite then you soon got ZUI flashed on your phone and can install recovery etc
Good luck!
Click to expand...
Click to collapse
Thanks very much for this guidance and files, so this will be a serial communucation, and I will not need the MTP USB to work? I have trouble with that driver, tried two windows 7 computers without luck.
I will try asap, phone is a christmas present so I'm in a kind off hurry. Plan was to flash ZUI to CM12.1...
nordream said:
Thanks very much for this guidance and files, so this will be a serial communucation, and I will not need the MTP USB to work? I have trouble with that driver, tried two windows 7 computers without luck.
I will try asap, phone is a christmas present so I'm in a kind off hurry. Plan was to flash ZUI to CM12.1...
Click to expand...
Click to collapse
Nah no need for MTP
As soon as you got zui into phone, you can convert back to cyanogen if you prefer that one. Look at modacos guide for example http://www.modaco.com/forums/topic/375804-convert-z1-from-zukui-to-cyanogen-os/
When you got zui loaded onto phone again, its in chinese. On the first screen you are met with just press the button in the bottom (on screen), then press cogwheel (which is the settings), scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option to change language to english incase you cant make out the chinese
tndb said:
Nah no need for MTP
As soon as you got zui into phone, you can convert back to cyanogen if you prefer that one. Look at modacos guide for example http://www.modaco.com/forums/topic/375804-convert-z1-from-zukui-to-cyanogen-os/
Click to expand...
Click to collapse
Christmas is saved ! I'm back in business Thanks to tndb !
But last problem is to flash to CM. These steps below are unclear for me, tried "Wipe Data" and then "install using adb" but the sideload command fails with error "no device"
Select the option to wipe the device (important!)
Select the install update / from USB option
Type 'adb sideload z1.cyanogen.convert.signed.zip'
There are several Wipe options data or partitions?
Don't get any update / from USB option in the recovery menu. Only install using adb, but it fails
nordream said:
Christmas is saved ! I'm back in business Thanks to tndb !
But last problem is to flash to CM. These steps below are unclear for me, tried "Wipe Data" and then "install using adb" but the sideload command fails with error "no device"
Select the option to wipe the device (important!)
Select the install update / from USB option
Type 'adb sideload z1.cyanogen.convert.signed.zip'
There are several Wipe options data or partitions?
Don't get any update / from USB option in the recovery menu. Only install using adb, but it fails
Click to expand...
Click to collapse
Not sure where you got stuck?
If you already are as far as in cyanogen recovery, then its prob that your phone isnt detected in device manager as it may be detected as yet another device. Install driver again and then run the "adb sideload z1.cyanogen.convert.signed.zip" command (make sure the zip is in the same folder as your adb working folder)
otherwise read below
Did you manage to get into bootloader mode by typing "adb reboot bootloader"?
If you are already in bootloader mode, have you checked device manager if phone is detected here?
Have you made sure bootloader is unlocked aswell? Check with "fastboot -i 0x2b4c oem device-info" and if its still locked then type "fastboot -i 0x2b4c oem unlock"
and then "fastboot -i 0x2b4c boot z1.recovery.testkeys.img" to load cyanogen recovery.
Let me know if you still cant get it working, if you got google hangouts just pm me with details and ill help you from there
tndb said:
Not sure where you got stuck?
If you already are as far as in cyanogen recovery, then its prob that your phone isnt detected in device manager as it may be detected as yet another device. Install driver again and then run the "adb sideload z1.cyanogen.convert.signed.zip" command (make sure the zip is in the same folder as your adb working folder)
Click to expand...
Click to collapse
Thanks tndb, you put me in the right direction again, did a "adb kill-server" before adb sideload command and voila the sideload command connected and soon I'm ready to wrap the christmas present.
Merry Christmas ! and thanks
nordream said:
Thanks tndb, you put me in the right direction again, did a "adb kill-server" before adb sideload command and voila the sideload command connected and soon I'm ready to wrap the christmas present.
Merry Christmas ! and thanks
Click to expand...
Click to collapse
Aaah awesome!
Merry xmas to you too and have a happy new year!
hi
I have the same problem. When i try to falsh, by pressing download, i get this error:
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
Any thoughts?
How can i flash anything? i can acces fastboot, recovery menu.
nordream said:
I get to the ZUK Recovery menu by holding down both volume + and - for 10 sec at the moment phone vibrates at startup.
Hopefully there is a way to flash a recovery image. In the ZUK recovery menu there is an option to install update.zip, but I can't find a way to push the file to the device.
Click to expand...
Click to collapse
if you find a way, please tell me, i m in the same boat
Extentho said:
I have the same problem. When i try to falsh, by pressing download, i get this error:
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
Any thoughts?
How can i flash anything? i can acces fastboot, recovery menu.
Click to expand...
Click to collapse
If you can boot in fasboot mode and you are able to connect to your device from your pc you can just download the fastboot flashable stock image from Cyanogen Inc. Unzip it and flash it with fastboot. There are a a lot of guides how to do that on xda.
Planet X said:
If you can boot in favor mode and you are able to connect to your device from your pc you can just download the fastboot flashable stock image from Canon Inc. Unzip it and flash it with fastboot. There are a a lot of guides how to do that on xda.
Click to expand...
Click to collapse
Can you give me some links please? thank you very much. Qufil seems not to work for me. What is Canon inc, and where i can donwload the fastboot flashable stock image for lenovo zuk z1? And most important, how do i do that?
Extentho said:
Can you give me some links please? thank you very much. Qufil seems not to work for me. What is Canon inc, and where i can donwload the fastboot flashable stock image for lenovo zuk z1? And most important, how do i do that?
Click to expand...
Click to collapse
Download the fast signed image of COS 12.1 here http://builds.cyngn.com/factory/ham/...d-fastboot.zip
Unzip it
Open cmd or terminal
Go to the unzipped folder
Execute this step by step:
fastboot -i 0x2b4c flash aboot emmc_appsboot.mbn
fastboot -i 0x2b4c flash modem NON-HLOS.bin
fastboot -i 0x2b4c flash rpm rpm.mbn
fastboot -i 0x2b4c flash sbl1 sbl1.mbn
fastboot -i 0x2b4c flash dbi sdi.mbn
fastboot -i 0x2b4c flash splash splash.img
fastboot -i 0x2b4c flash tz tz.mbn
fastboot -i 0x2b4c flash persist persist.img
This will restore your bootloader to stock Cyanogen OS. It will remain unlocked. You can add cache.img, system.img and userdata yourself I guess. Otherwise Google for flash fastboot nexus. That should give you an idea how to flash with fastboot.
Planet X said:
Download the fast signed image of COS 12.1 here http://builds.cyngn.com/factory/ham/...d-fastboot.zip
Unzip it
Open cmd or terminal
Go to the unzipped folder
Execute this step by step:
fastboot -i 0x2b4c flash aboot emmc_appsboot.mbn
fastboot -i 0x2b4c flash modem NON-HLOS.bin
fastboot -i 0x2b4c flash rpm rpm.mbn
fastboot -i 0x2b4c flash sbl1 sbl1.mbn
fastboot -i 0x2b4c flash dbi sdi.mbn
fastboot -i 0x2b4c flash splash splash.img
fastboot -i 0x2b4c flash tz tz.mbn
fastboot -i 0x2b4c flash persist persist.img
This will restore your bootloader to stock Cyanogen OS. It will remain unlocked. You can add cache.img, system.img and userdata yourself I guess. Otherwise Google for flash fastboot nexus. That should give you an idea how to flash with fastboot.
Click to expand...
Click to collapse
Tried the first command and i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think the computer doesn t see the phone, because when i try command adb reboot bootloader in cmd i get device not found.
I have in installed the universal adb driver for android, but still doesn t work.
Extentho said:
Tried the first command and i got this:
I think the computer doesn t see the phone, because when i try command adb reboot bootloader in cmd i get device not found.
I have in installed the universal adb driver for android, but still doesn t work.
Click to expand...
Click to collapse
You have had an answer from the phone. So there was a connection. You can always test beforehand with the command fastboot -i 0x4b2c devices. It should then let you see the serial number of your phone.
But your answer was device is locked. That means you still have an locked bootloader. For to be able to use adb you have to add 0x4b2c to your usb_adb.ini file. Please look a bit more to the solutions that already have been given in the other threads. To unlock your bootloader you need to use the toolkit. You will find that in the development thread. The toolkit: http://forum.xda-developers.com/zuk-z1/development/win-zuk-z1-toolkit-0-1-alpha-t3235964
You will than have the possibility to flash a TWRP recovery too. With that you could also just flash the full rom as a zip.
Planet X said:
You have had an answer from the phone. So there was a connection. You can always test beforehand with the command fastboot -i 0x4b2c devices. It should then let you see the serial number of your phone.
But your answer was device is locked. That means you still have an locked bootloader. For to be able to use adb you have to add 0x4b2c to your usb_adb.ini file. Please look a bit more to the solutions that already have been given in the other threads. To unlock your bootloader you need to use the toolkit. You will find that in the development thread. The toolkit: http://forum.xda-developers.com/zuk-z1/development/win-zuk-z1-toolkit-0-1-alpha-t3235964
You will than have the possibility to flash a TWRP recovery too. With that you could also just flash the full rom as a zip.
Click to expand...
Click to collapse
I have played a while with this tool, and now the phone boots only into zuk logo(not the cyanogen anymore), also now i have access only to recovery and fastboot. Think i ve messed it up. Tried to sideload the stock rom and worked up to 47% with this tool, then gave me error on the phone. So, there is a working connection between phone and pc but i don t know what i can do. However i can t unlock the bootloader , when i try, it shows press any key and nothing happens. When i check the devices connected to the pc in adb tool, it shows me nothing. The only connection i was able to put up, was only sideload update.
None of the other commands is working. I can t install twrp recovery, i can, t unlock bootloader. I can t do anything.
I was able to use some fastboot commands in fastboot mode however. I managed to reboot phone in android using command in zuk tool from pc. When tried to flash stock rom in fastboot with the command from the tool, i got the same error : DEVICE IS LOCKED . CANNOT FLASH IMAGES
Extentho said:
I have played a while with this tool, and now the phone boots only into zuk logo(not the cyanogen anymore), also now i have access only to recovery and fastboot. Think i ve messed it up. Tried to sideload the stock rom and worked up to 47% with this tool, then gave me error on the phone. So, there is a working connection between phone and pc but i don t know what i can do. However i can t unlock the bootloader , when i try, it shows press any key and nothing happens. When i check the devices connected to the pc in adb tool, it shows me nothing. The only connection i was able to put up, was only sideload update.
None of the other commands is working. I can t install twrp recovery, i can, t unlock bootloader. I can t do anything.
I was able to use some fastboot commands in fastboot mode however. I managed to reboot phone in android using command in zuk tool from pc.
Click to expand...
Click to collapse
Thank you for the information. You should be able to flash the stock Cyanogen recovery with fastboot. Than you could do a factory reset in that recovery. That's all you need to have a working phone again. But with that recovery you could also flash the signed zip from Cyanogen.
Planet X said:
Thank you for the information. You should be able to flash the stock Cyanogen recovery with fastboot. Than you could do a factory reset in that recovery. That's all you need to have a working phone again. But with that recovery you could also flash the signed zip from Cyanogen.
Click to expand...
Click to collapse
I CANNOT flash the stock rom using fastboot. I have tried, many times. Also, the USB debugging was not activate befor the bricking. The only option i can use to flash something seems to be sideload. Also, where can i find the stock recovery?? I acces the fastboot mode from stock recovery. Isn t this enough?
That is what i recieve when i try to install a recovery using the tool. I can wait all day long.
Also, wehn i try to use the command [FASTBOOT]REBOOT INTO ANY CUSTOM RECOVERY WITHOU INSTALL i recieve this:
When i use the command [FASTBOOT] REFLASH THE STOCK USING MANUALLY DOWNLOADED FACTORY IMAGE i get this. (i donwloaded the official signed fastboot rom and followed the instructions)
And that is what i get when i try to sideload the cm signed rom with the [ADB]SIDELOAD A ZIP FILE command

P8lite has no operating sys. CAN ANYONE HELLP ?

I've P8lite .. Rom be deleted by mistake while trying install SU
Now, phone has no operating system, Trying a lot to install many of
Roms by twrp 3.0.2-0 ( C185B120, C185B525 And C185B560 ) more's the
pity to no end with message "Skipping MD5 check: no MD5 file found"
and "Could not find 'META-INF/com/google/android/update-binary' in the
zip file". "Error installing zip file". "Failed".
Thanks in advance
ALE-L21 UAE
hosamzaiher said:
I've P8lite .. Rom be deleted by mistake while trying install SU
Now, phone has no operating system, Trying a lot to install many of
Roms by twrp 3.0.2-0 ( C185B120, C185B525 And C185B560 ) more's the
pity to no end with message "Skipping MD5 check: no MD5 file found"
and "Could not find 'META-INF/com/google/android/update-binary' in the
zip file". "Error installing zip file". "Failed".
Thanks in advance
ALE-L21 UAE
Click to expand...
Click to collapse
Which rom are you trying to flash?
Suleiman01 said:
Which rom are you trying to flash?
Click to expand...
Click to collapse
thanx 4 reply .. i don't know which the suitable one 4 my phone, i tried to flash C185B120, C185B525 And C185B560
hosamzaiher said:
thanx 4 reply .. i don't know which the suitable one 4 my phone, i tried to flash C185B120, C185B525 And C185B560
Click to expand...
Click to collapse
Isn't it in Update.app format? This format is not supported by TWRP. Install original recovery first then update your phone.
Suleiman01 said:
Isn't it in Update.app format? This format is not supported by TWRP. Install original recovery first then update your phone.
Click to expand...
Click to collapse
I said that 2 my self " amazed " ! .. could u please tell me How ?
linking me to this recovery
hosamzaiher said:
I said that 2 my self " amazed " ! .. could u please tell me How ?
linking me to this recovery
Click to expand...
Click to collapse
You can extract original recovery from official firmware update.app using Huawei update extractor.
---------- Post added at 09:00 AM ---------- Previous post was at 08:59 AM ----------
Suleiman01 said:
You can extract original recovery from official firmware update.app using Huawei update extractor.
Click to expand...
Click to collapse
Link
https://goo.gl/aSMU9M
Suleiman01 said:
You can extract original recovery from official firmware update.app using Huawei update extractor.
---------- Post added at 09:00 AM ---------- Previous post was at 08:59 AM ----------
Link
https://goo.gl/aSMU9M
Click to expand...
Click to collapse
when i've never succeed flashing with TWRP, i converted into CWM
it stops to flash any thing more .. ZIP or IMG files with error message "couldn't un mount sdcard" !
hosamzaiher said:
when i've never succeed flashing with TWRP, i converted into CWM
it stops to flash any thing more .. ZIP or IMG files with error message "couldn't un mount sdcard" !
Click to expand...
Click to collapse
What are you talking about? I didn't say to flash cwm ( clockwork recovery) or twrp (team win recovery project).
Just install the Huawei update extractor on pc.
Extract original recovery from official firmware
Connect your phone to pc and go in fastboot mode
Open minimal adb on pc and type
Fastboot flash recovery recovery.img
Reboot your phone.
Done
Suleiman01 said:
What are you talking about? I didn't say to flash cwm ( clockwork recovery) or twrp (team win recovery project).
Just install the Huawei update extractor on pc.
Extract original recovery from official firmware
Connect your phone to pc and go in fastboot mode
Open minimal adb on pc and type
Fastboot flash recovery recovery.img
Reboot your phone.
Done
Click to expand...
Click to collapse
sorry dear
if i open minimal adb on pc and typ " adb devices " i've nothing till i back to check option " Apply from ADB " from cyanogen recovery then any command order followed by error message " phone closed " !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hosamzaiher said:
sorry dear
if i open minimal adb on pc and typ " adb devices " i've nothing till i back to check option " Apply from ADB " from cyanogen recovery then any command order followed by error message " phone closed " !
Click to expand...
Click to collapse
Suleiman01 said:
What are you talking about? I didn't say to flash cwm ( clockwork recovery) or twrp (team win recovery project).
Just install the Huawei update extractor on pc.
Extract original recovery from official firmware
Connect your phone to pc and go in fastboot mode
Open minimal adb on pc and type
Fastboot flash recovery recovery.img
Reboot your phone.
Done
Click to expand...
Click to collapse
https://s18.postimg.org/ic04061op/image.png
Use fastboot command when in fastboot mode, not adb. try fastboot devices
hosamzaiher said:
sorry dear
if i open minimal adb on pc and typ " adb devices " i've nothing till i back to check option " Apply from ADB " from cyanogen recovery then any command order followed by error message " phone closed " !
Click to expand...
Click to collapse
No. Type fastboot devices. Adb is used when phone is powerd on and usb debugging is enabled.
Go in fastboot mode by pressing power button and volume down key. Then attach it to pc and do the steps stated in previous post.
Suleiman01 said:
No. Type fastboot devices. Adb is used when phone is powerd on and usb debugging is enabled.
Go in fastboot mode by pressing power button and volume down key. Then attach it to pc and do the steps stated in previous post.
Click to expand...
Click to collapse
thanx brother, i back TWRP 3.0.2-0 and installed http://huaweip8lite.blogspot.com.eg/2016/07/custom-romtwrpemui-40p8-lite-ale.html?view=sidebar
but the screen stuck on logo
hosamzaiher said:
thanx brother, i back TWRP 3.0.2-0 and installed http://huaweip8lite.blogspot.com.eg/2016/07/custom-romtwrpemui-40p8-lite-ale.html?view=sidebar
but the screen stuck on logo
Click to expand...
Click to collapse
Maybe try flashing official firmware.
Suleiman01 said:
Maybe try flashing official firmware.
Click to expand...
Click to collapse
How to determined the suitable official firmware ?
hosamzaiher said:
How to determined the suitable official firmware ?
Click to expand...
Click to collapse
Which was your last firmware? Flash that firmware's recovery. Then using that recovery update your phone.
---------- Post added at 07:23 PM ---------- Previous post was at 07:23 PM ----------
Suleiman01 said:
Which was your last firmware? Flash that firmware's recovery. Then using that recovery update your phone.
Click to expand...
Click to collapse
Try flashing B120 recovery.
Suleiman01 said:
Which was your last firmware? Flash that firmware's recovery. Then using that recovery update your phone.
---------- Post added at 07:23 PM ---------- Previous post was at 07:23 PM ----------
Try flashing B120 recovery.
Click to expand...
Click to collapse
it seems to be Solved :laugh:
but with a bit trouble ..
first: i used HuaweiUpdateExtractor to extract all files inside, then, did 3 orders on fastboot . . ( flash boot.img - flash recovery.img - flash sys.img )
phone booted on 3.1 Emul with alot stopped functions ( wifi, sim card and so on) finally made a local update using app file stored in SD card for "B560" .. phone started correctly but there was a problem with WIFI wasn't stable .. connect and disconnect !
hosamzaiher said:
it seems to be Solved :laugh:
but with a bit trouble ..
first: i used HuaweiUpdateExtractor to extract all files inside, then, did 3 orders on fastboot . . ( flash boot.img - flash recovery.img - flash sys.img )
phone booted on 3.1 Emul with alot stopped functions ( wifi, sim card and so on) finally made a local update using app file stored in SD card for "B560" .. phone started correctly but there was a problem with WIFI wasn't stable .. connect and disconnect !
Click to expand...
Click to collapse
Update your phone to marshmallow. This might fix wifi issue. By the don't forget to hit thanks button :good: if your problem is solved.

Fix bootloop in redmi note 3 (no recovery ,no edl mode)

After trying to flash the latest 7.1.1 cm 14 ropms many people ended up in bootloop where your phone switch on ,shows mi logo and rebbot again. Many where not able to enter recovey mode also.. Now i come up with a perfect soluton for you all on how to fix these issues in your phone..Lets Get started..
If anything goes wrong iam not responsible.Do it At your Own Risk.
Requirements
------------------
1. Enter edl .rar (attached below)
2.Miui Stock Rom (FastBoot). Download it from(only use this version) here
3.Phone Must have Charge of 50% or more.
4.Unlock Boot loader.zip (Attched Below)
6.MIPhone Tools and install it .Get it from here
6.Extract all the file
7. PDA Net.(Optional,but installing will be useful). Get it from here
Once you have all of the file we can move on
Steps
------
1. Put Your Phone into fastboot mode by pressing Vol Down and power button at same time.
2.Connect your Phone With Your PC
3.Run EDL Mode.exe from the zip Enter edl.. Now your phone must be in edl mode. You can see a light blinking at the top of your phone.
4. From the Unlock Boot Loader folder copy "emmc_appsboot.mbn" to the rom folder ie)
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global--> images--> paste it there (replace/overwrite if existing)
5. Once the above step is done, Open MIFlash tool as administrator. Browse the folder
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global and select it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.From the drop Down Menu Select Advanced.
7.Set Fastboot Script As Flash_ALL.Bat.
8.Set Flash Programmer As prog_emmc_firehose_8976_ddr.mbn from images folder.
9. Set RAW Xml File as rawprogram*.xml from images folder
10. Set Patch XML File as patch*.xml from images folder.
11. Video Help HERE.... Watch from 2.40 (Ignore the other portion,We dont need that Part)
Special [email protected] for the video.. I didn't made that video..
12. Once The Above step is done. Click REFRESH OPTION,and you will see Phone detected By The Name COMXX.(XX will be a number)
13.Click Flash and Wait for some time and allow the phone to reboot.
14.Once all the step is done your phone will be good to use..:fingers-crossed: :fingers-crossed:
UNLOCKING BOOT LOADER AND INSTALLING TWRP AGAIN
-------------------------------------------------------------------------
1.Once Your Phone Reboots successfully enable USB Debugginf From Developer Option.
2.Connect Your phone to your PC and Open CMD as administrator.
3.Type in "adb devices".
4. Cmd will show a random number and Device (Everyone will be knowing this,but for info only iam writing it here)
5.Type "adb reboot bootloader". Now your phone will boot into fastboot mode.
6.Type "fastboot oem device-info" to get device status.
7.Type "fastboot oem unlock-go" to unlock bootloader.
8.Again type "fastboot oem device-info" to check to find if device is unlocked.(Do not reboot YET)
9. Now Downlaod TWRP from HERE
10. Now Got to the folder containig TWRP . By holding the Shift Key Of key Board ,right click the mouse and select OPEN COMMAND WINDOW HERE.
11. Type "fastboot flash recovery recovery_filename.img"
12.Type "fastboot reboot".
You Phone will be good to go. If anything goes wrong or you have any doubt Comment Below do not pm me..i will not reply..
If this thread helpef you thumbs up and do comment and shre this post
So i do not need to unlock the boot loader before using MiTool to flash phone via EDL
ahh988 said:
So i do not need to unlock the boot loader before using MiTool to flash phone via EDL
Click to expand...
Click to collapse
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool
adithyan25 said:
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool
Click to expand...
Click to collapse
I did that but phone is still stuck . I'm getting infinite boot animation ?
ahh988 said:
I did that but phone is still stuck . I'm getting infinite boot animation ?
Click to expand...
Click to collapse
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed
adithyan25 said:
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed
Click to expand...
Click to collapse
I am stuck at boot animation with the three white dots spinning for ever ? will try to do as you said
I tried fastboot oem unlock-go but i get response: token verification failed and device still stuck on bootanimation
well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful
nitephoenix said:
well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful
Click to expand...
Click to collapse
always my pleasure
For some mi unlock stucks at 50%.. I was one of them...every time I try fails...so I found this was the only way for those who can't access it using mi unlock
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
Yeah...I know that...but it does not support volte. .only abhisheks fw sprt volte
nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks
Pleroma said:
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks
Click to expand...
Click to collapse
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe
nitephoenix said:
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe
Click to expand...
Click to collapse
I used to flash it via twrp ..(by deleting bootllader file) followed by flashing lazyflasher...I didn't faced any prblm yet
Mine behaves different
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.
sarabeshsab said:
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.
Click to expand...
Click to collapse
Probably the problem with bootloader file
not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.
Jjleininger said:
not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.
Click to expand...
Click to collapse
Download eiter China based ROM or ROM from post.
Mi flash tool have many prolems.
Some tips:-
Make sure driver enforcement is disabled in PC.
All drivers including PDA net is installed.
Copy paste the unlocked bootloade file inside images folder and replace original one. Even after tryig this method it fails try my other method unbrick viafasrboot
uhm, this does not work for some reason...
i did everything as you said but in the end it just says cathasrophic error and something
After flashing i get Mi logo, vibration and reboot, please help

Rooting and unlock bootloader for Redmi 3S plus (indian) (solved 50% stuck)

Guys is that a way to root redmi 3s without unlocking bootloader?
Edit: Practically it's not possible....Unlock bootloader first then install twrp now root in just 7 days.
Note: Don't use any tricks available in forums and it won't work, just wait minimum 6days after U get permission because ur profile will get update to mi server slowly and it takes time then after 6th day use miunlock otherwise U will get 50% error.
Requirements: switch on OEM unlock and debug option that's all and login in to the same mi account which U got permission.
Please refer: http://en.miui.com/thread-298586-1-1.html
I guess so.. It can be done with MiFlash Tool (EDL)
SILF0X said:
I guess so.. It can be done with MiFlash Tool (EDL)
Click to expand...
Click to collapse
tried but failed so i think we need unlocked bootloader...
First thing first..
1. Download and install latest MiFlashTool
2. Reboot into EDL mode
3. Flash this like you flash fastboot rom using MiFlashTool
TWRP FLASHER
If you're done, please let me know..
Note: only for redmi 3s/Prime/3x
SILF0X said:
First thing first..
1. Download and install latest MiFlashTool
2. Reboot into EDL mode
3. Flash this like you flash fastboot rom using MiFlashTool
TWRP FLASHER
If you're done, please let me know..
Note: only for redmi 3s/Prime/3x
Click to expand...
Click to collapse
But it needs unlocked bootloader right? Did u tried it
drganbds said:
But it needs unlocked bootloader right? Did u tried it
Click to expand...
Click to collapse
I made this tool, of course i tried it.
Just flash this package, you'll get TWRP installed. Even if you're on locked bootloader. After that, you can flash SuperSU.
Just try it..
SILF0X said:
I made this tool, of course i tried it.
Just flash this package, you'll get TWRP installed. Even if you're on locked bootloader. After that, you can flash SuperSU.
Just try it..
Click to expand...
Click to collapse
Flash through updater app? Why can't u make this as public and as for as I search a lot in Google forums they told without unlock u can't root our device and im using 3s+ variant.
drganbds said:
Flash through updater app? Why can't u make this as public and as for as I search a lot in Google forums they told without unlock u can't root our device and im using 3s+ variant.
Click to expand...
Click to collapse
Flash it using the latest MiFlashTool.
I found it yesterday, doesn't have much time to publish it.
Redmi 3s+ ? Maybe its Redmi 3x?
SILF0X said:
Flash it using the latest MiFlashTool.
I found it yesterday, doesn't have much time to publish it.
Redmi 3s+ ? Maybe its Redmi 3x?
Click to expand...
Click to collapse
In MI flash tool latest tried but it does nothing and didn't flash anything. Do I need to put in fastboot mode manually?
drganbds said:
In MI flash tool latest tried but it does nothing and didn't flash anything. Do I need to put in fastboot mode manually?
Click to expand...
Click to collapse
You have to enter EDL mode.
adb reboot edl
SILF0X said:
You have to enter EDL mode.
adb reboot edl
Click to expand...
Click to collapse
Edl means downloader mode right? then in mi flash i have to select the entire .zip file or the recovery.img alone?
drganbds said:
Edl means downloader mode right? then in mi flash i have to select the entire .zip file or the recovery.img alone?
Click to expand...
Click to collapse
How To Boot Into EDL Mode :
1. Turn off your phone completely.
2. Press Volume Up (+) and Power buttons simultaneously. This will bring your phone into Recovery Mode.
3. You will see several options in Recovery menu. Choose “Download”
4. Your phone should reboot into Download mode / EDL.
5. Finally you can connect it to PC using its USB cable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download : MiFlash (Beta)
a. Extract TWRP_FLASHER_HM3SX.zip into D:\TWRP_FLASHER_HM3SX
b. Run MiFlash and select folder D:\TWRP_FLASHER_HM3SX that contains flash_all.bat
c. Select "clean all"
d. Select "Refresh"
e. Select "Flash"
SILF0X said:
How To Boot Into EDL Mode :
1. Turn off your phone completely.
2. Press Volume Up (+) and Power buttons simultaneously. This will bring your phone into Recovery Mode.
3. You will see several options in Recovery menu. Choose “Download”
4. Your phone should reboot into Download mode / EDL.
5. Finally you can connect it to PC using its USB cable.
Download : MiFlash (Beta)
a. Extract TWRP_FLASHER_HM3SX.zip into D:\TWRP_FLASHER_HM3SX
b. Run MiFlash and select folder D:\TWRP_FLASHER_HM3SX that contains flash_all.bat
c. Select "clean all"
d. Select "Refresh"
e. Select "Flash"
Click to expand...
Click to collapse
Did as u told and it didn't flash twrp rather It showed success. Have u unlocked your bootloader?
Device can't go to EDL mode and it says device locked
Regarding to ur root with out unlocking bootloader
Dont get me Wrong guys
I already tried this method a long time ago..where my device is locked
Here's What i did.... before i have locked bootloader..i downloaded fastboot images put the device in edl mode and change the recovery file img to twrp img and rename it to recovery.img..And flash the All os files.. flashed successfully but still it shows stock recovery
that's why i'm wondering about that .
.And i changed the boot file to twrp image and rename it to boot .. it flashed the files succesfull But it stuck on mi logogo and lead me to qualocom diagonostic mode 900E Because of partioning mismatch [i guess ]
luckily i'm having fastboot because the flasher first flashes the bootloader and mbn files
i initiate
Code:
fastboot oem edl
command then i'm in edl mode and flashed the device to previous state ..After that i stopped the work it's a new phone guys [1 week ] i got feared
So my query is how it still can't boot into twrp recovery mode if it's flashed successfull in edl mode [ i checked the log file ]
I guess because of encryption process of system partition after flashing ..so again what i did is after flashing the fles immediatly i boot on to recovery still the device automatically loops .. and start encryption
Now i Need Some one who's bootloader is locked to continue my work/test
Here's My Contact info 7396884287. Named Tyson... Give Me a Missed Call
drganbds said:
Did as u told and it didn't flash twrp rather It showed success. Have u unlocked your bootloader?
Click to expand...
Click to collapse
yes, i unlock my bootloader. Sorry, my bad..
---------- Post added at 09:03 AM ---------- Previous post was at 08:55 AM ----------
Tyson12 said:
Dont get me Wrong guys
I already tried this method a long time ago..where my device is locked
Here's What i did.... before i have locked bootloader..i downloaded fastboot images put the device in edl mode and change the recovery file img to twrp img and rename it to recovery.img..And flash the All os files.. flashed successfully but still it shows stock recovery
that's why i'm wondering about that .
.And i changed the boot file to twrp image and rename it to boot .. it flashed the files succesfull But it stuck on mi logogo and lead me to qualocom diagonostic mode 900E Because of partioning mismatch [i guess ]
luckily i'm having fastboot because the flasher first flashes the bootloader and mbn files
i initiate
Code:
fastboot oem edl
command then i'm in edl mode and flashed the device to previous state ..After that i stopped the work it's a new phone guys [1 week ] i got feared
So my query is how it still can't boot into twrp recovery mode if it's flashed successfull in edl mode [ i checked the log file ]
I guess because of encryption process of system partition after flashing ..so again what i did is after flashing the fles immediatly i boot on to recovery still the device automatically loops .. and start encryption
Now i Need Some one who's bootloader is locked to continue my work/test
Here's My Contact info 7396884287. Named Tyson... Give Me a Missed Call
Click to expand...
Click to collapse
I try to flash twrp and mirecovery using that package, and it works. I'm on unlocked bootloader now
SILF0X said:
yes, i unlock my bootloader. Sorry, my bad..
---------- Post added at 09:03 AM ---------- Previous post was at 08:55 AM ----------
I try to flash twrp and mirecovery using that package, and it works. I'm on unlocked bootloader now
Click to expand...
Click to collapse
R u saying that you flash twrp & succeed to have twrp while your bootloader was locked.
Sent from my Redmi 3S using XDA-Developers Legacy app
Tyson12 said:
R u saying that you flash twrp & succeed to have twrp while your bootloader was locked.
Sent from my Redmi 3S using XDA-Developers Legacy app
Click to expand...
Click to collapse
I meant that succeed to have twrp while the bootloader was unlocked.
Tyson12 said:
Here's What i did.... before i have locked bootloader..i downloaded fastboot images put the device in edl mode and change the recovery file img to twrp img and rename it to recovery.img..And flash the All os files.. flashed successfully but still it shows stock recovery
Click to expand...
Click to collapse
You said that you flash twrp.img in edl mode, flashed successfully, but still it shows stock recovery.
i flash twrp.img in edl mode too. Flash successfully, and it shows TWRP.
R u already download my package?
SILF0X said:
I meant that succeed to have twrp while the bootloader was unlocked.
You said that you flash twrp.img in edl mode, flashed successfully, but still it shows stock recovery.
i flash twrp.img in edl mode too. Flash successfully, and it shows TWRP.
R u already download my package?
Click to expand...
Click to collapse
U r package is working for unlocked bootloader..
But in my case my bootloader is locked..
So...
Sent from my Redmi 3S using XDA-Developers Legacy app
Guys I'm stuck at 50% always( couldn't verify device) in MI flash tool please help on unlock.
How u guys had unlock without errors?

Help Me Unbrick My Mi A1!!

I bought the Mi A1 some weeks ago and it was working just fine. I flashed twrp, rooted and was happy with it until I found out that I could no longer install OTAs so I decided to flash the fastboot ROM, downloaded the lastest one from www.xiaomifirmware.com, attemted to flash it but couldn't. The MiFlashTool for some reason simply didn't have a flash option in it which it was supposed to have so uninstalled the flash tool and tried installing older versions of it but still no signs of the flash option, this got me frustrated and I was searching for other ways to flash the fastboot rom, I did found some and tried putting the rom in the minimal adb and fastboot tool, it did flash it but the slot a or b, i don't remember, was stuck on recovery mode, mean while i could boot from the another slot normally, I agan istalled twrp on the working slot(Idk why) and
the wifi was broken. I simply couldn't turn it on(the wifi). So I was back to flashing the fastboot rom and in the process I figured a way to find the flash option that was missing using the tab key on the keyboard but the flash itself didn't go very well, i got a modem_a error so I was back to other ways of flashing it and in the process the phone turned off and a Qualcomm driver began to install, it got installed and I was extremely happy that I could flash the rom with the MiFlashTool but after the flash completed and I got the sucess message, the phone got stuck on the bootlogo and rebooted normally in the next automatic reboot, I was greeted with the basic setup and I was happy but after 30-60 sec it got hung and the device started to repeat this process. I tried flash the older versions of the rom but still no luck. Can some one help me with this issue???
*************************************************************************
Video shocasicg the issue: https://www.youtube.com/watch?v=3YcWsWYQVGQ
This issue has been fixed, Try following these steps:
1) Unlock the bootloader.
2) Download Mi Flash Tool and install it. (For the drivers, skip it if you have installed the drivers already)
3) Download and Install minimal adb and fastboot , persist.img from august build link will be below.
4) Copy the persist.img to the where the minimal adb fastboot tool is located.
5) Goto the minimal adb fastboot tool folder where you had put the persist.img.
6) Open cmdhere.exe
7) Put your phone in fastboot mode (Volume - and Power)
8) Type the following commands:
- fastboot devices (you should something like this:
Fastboot dsad5454sfs, If not, re-install the the fastboot drivers correctly. )
- fastboot erase persist.img
- fastboot flash persist persist.img
Voila! Done but please note that you can just do it once and not repeatedly.
Adb and fastboot tool: https://forum.xda-developers.com/sho....php?t=2317790
i have the same issue look at the video
https://www.youtube.com/watch?v=3YcWsWYQVGQ
I don't know the specifics but you're going to have to go for a very basic low-level wipe and re-flash of the stock ROM from Xiaomi. Be *very* careful to get the correct ROM files and flashing tools. I'd head to the official Xiaomi EN (english) forums or ask here on XDA. I think the reason you haven't had more replies is because your post was a difficult to read wall of text.
If you're currently booting up but then it's rebooting on it's own - that's actually a good sign that you hopefully should be able to restore it to stock firmware and then go from there. Beyond that I can't help you but I'm sure someone else here can. Good luck! And if you figure it out make sure to come back and let us know how you fixed it in case anyone else has similar problems.
Just take it to service center they will do it.
info:
If you can flash anything using fastboot then do fastboot flash partition gpt_both0.bin and you'll enter edl mode and should be able to flash the FASTBOOT ROM through the mi flash tool if you have installed the drivers properly.
alsheron said:
I don't know the specifics but you're going to have to go for a very basic low-level wipe and re-flash of the stock ROM from Xiaomi. Be *very* careful to get the correct ROM files and flashing tools. I'd head to the official Xiaomi EN (english) forums or ask here on XDA. I think the reason you haven't had more replies is because your post was a difficult to read wall of text.
If you're currently booting up but then it's rebooting on it's own - that's actually a good sign that you hopefully should be able to restore it to stock firmware and then go from there. Beyond that I can't help you but I'm sure someone else here can. Good luck! And if you figure it out make sure to come back and let us know how you fixed it in case anyone else has similar problems.
Click to expand...
Click to collapse
So I did got it fixed and to a working state but my dissatisfaction led me to some more trouble and it's currently hard bricked or need to be flashed using a deep flash cable to be presice. Basically it's on its way to the service centre.
So how I fixed the issue?
1) Unlock the bootloader.
2) Download Mi Flash Tool and install it. (For the drivers, skip it if you have installed the drivers already)
3) Download and Install minimal adb and fastboot , official fastboot rom.
4) Extract the fastboot rom and copy the persist.img located in the Images folder of the fastboot ROM to the where the minimal adb fastboot tool is located.
5) Goto the minimal adb fastboot tool folder where you had put the persist.img.
6) Open cmdhere.exe
7) Put your phone in fastboot mode (Volume - and Power)
8) Type the following commands:
- fastboot devices (You should see something If not re-install the the fastboot drivers correctly. )
- fastboot erase persist.img
- fastboot flash persist persist.img
Voila! Done but please note that you cant just do it once and not repeatedly.
Links:
Adb and fastboot tool: https://forum.xda-developers.com/showthread.php?t=2317790
fastboot rom: http://bigota.d.miui.com/7.11.18/tissot_images_7.11.18_20171117.0000.00_7.1_3ac9b1f856.tgz
headshotde said:
i have the same issue look at the video
https://www.youtube.com/watch?v=3YcWsWYQVGQ
Click to expand...
Click to collapse
Look up ^^^^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
I am unable to erase or flash persisti.img on my Mi A1
khkalam said:
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
I am unable to erase or flash persisti.img on my Mi A1
Click to expand...
Click to collapse
The same hapend to me... Please how can i fix it!
khkalam said:
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
I am unable to erase or flash persisti.img on my Mi A1
Click to expand...
Click to collapse
Why tiffany? Mi A1's code name is tissot, Mi 5x's codename is tiffany.
I have both device, Mi 5x and Mi A1
NicoNewbie said:
Why tiffany? Mi A1's code name is tissot, Mi 5x's codename is tiffany.
Click to expand...
Click to collapse
I have Mi 5x and Mi A1. Tried this method and fail to flash. Also I am using A1 ported rom on my Mi 5x.
Thanks
khkalam said:
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
I am unable to erase or flash persisti.img on my Mi A1
Click to expand...
Click to collapse
Why don't you just use the batch file already provided in the stock image folder? Install adb fastboot system wide drivers. Connect your phone to pc in fastboot mode. And just run the batch file in tissot_images folder (I prefer flash_all_except_storage.bat)
Please just have a look at this thread: https://forum.xda-developers.com/mi-a1/how-to/ota-official-fastboot-image-n2g47h-7-12-t3728929
It includes a guide and already a lot of answered questions.
solution
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
here's how to flash persist
N.B YOU NEED TO DOWNLOAD THE FILE FROM THE GUIDE (32 mb Iin size)
Edwin Hamal said:
I bought the Mi A1 some weeks ago and it was working just fine. I flashed twrp, rooted and was happy with it until I found out that I could no longer install OTAs so I decided to flash the fastboot ROM, downloaded the lastest one from www.xiaomifirmware.com, attemted to flash it but couldn't. The MiFlashTool for some reason simply didn't have a flash option in it which it was supposed to have so uninstalled the flash tool and tried installing older versions of it but still no signs of the flash option, this got me frustrated and I was searching for other ways to flash the fastboot rom, I did found some and tried putting the rom in the minimal adb and fastboot tool, it did flash it but the slot a or b, i don't remember, was stuck on recovery mode, mean while i could boot from the another slot normally, I agan istalled twrp on the working slot(Idk why) and
the wifi was broken. I simply couldn't turn it on(the wifi). So I was back to flashing the fastboot rom and in the process I figured a way to find the flash option that was missing using the tab key on the keyboard but the flash itself didn't go very well, i got a modem_a error so I was back to other ways of flashing it and in the process the phone turned off and a Qualcomm driver began to install, it got installed and I was extremely happy that I could flash the rom with the MiFlashTool but after the flash completed and I got the sucess message, the phone got stuck on the bootlogo and rebooted normally in the next automatic reboot, I was greeted with the basic setup and I was happy but after 30-60 sec it got hung and the device started to repeat this process. I tried flash the older versions of the rom but still no luck. Can some one help me with this issue???
*************************************************************************
Video shocasicg the issue: https://www.youtube.com/watch?v=3YcWsWYQVGQ
This issue has been fixed, Try following these steps:
1) Unlock the bootloader.
2) Download Mi Flash Tool and install it. (For the drivers, skip it if you have installed the drivers already)
3) Download and Install minimal adb and fastboot , persist.img from august build link will be below.
4) Copy the persist.img to the where the minimal adb fastboot tool is located.
5) Goto the minimal adb fastboot tool folder where you had put the persist.img.
6) Open cmdhere.exe
7) Put your phone in fastboot mode (Volume - and Power)
8) Type the following commands:
- fastboot devices (you should something like this:
Fastboot dsad5454sfs, If not, re-install the the fastboot drivers correctly. )
- fastboot erase persist.img
- fastboot flash persist persist.img
Voila! Done but please note that you can just do it once and not repeatedly.
Adb and fastboot tool: https://forum.xda-developers.com/sho....php?t=2317790
Click to expand...
Click to collapse
hey mate i'm getting "image not allowed to download" error
how to fix this ?
neither do i see Fastboot dsad5454sfs
i see my device's no like 193a22 in CMD
can you help ?
i have 7.12.7 build can i still flash the persist that u have shared or do i need to extract it from 7.12.7 build?
anybody manage to solve the problem stuck at Android One logo ?
For MI5x with ported A1 rom

Categories

Resources