I flashed CM 13 rom with ODIN.without recovery mode .so my phone was hard bricked .it wasn't turned on.so i entered download mode by partitioned SD card method.then i flashed stock firmware .now s3 boot into GALAXY logo and then restart ( i think boot loop ). i can enter to download mode without sd card now.but when i try to enter recovery mode it is jump to download mode and show following :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9300I
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1, T1, R1, A1, P1
WRITE PROTECTION: Enable
What the hell? You flashed exynos cm13 in a snapdragon s3
Well download the right firmware bcuz I9300I is not like I9300
ziad311 said:
What the hell? You flashed exynos cm13 in a snapdragon s3
Well download the right firmware bcuz I9300I is not like I9300
Click to expand...
Click to collapse
i downloaded and flashed right firmware .it is not working.bootloop is happening
In odin mode tick nand erase all
shan93 said:
I flashed CM 13 rom with ODIN.without recovery mode .so my phone was hard bricked .it wasn't turned on.so i entered download mode by partitioned SD card method.then i flashed stock firmware .now s3 boot into GALAXY logo and then restart ( i think boot loop ). i can enter to download mode without sd card now.but when i try to enter recovery mode it is jump to download mode and show following :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9300I
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1, T1, R1, A1, P1
WRITE PROTECTION: Enable
Click to expand...
Click to collapse
use odin in download mode
Flash an Custom Recovery with Odin. This post can help you:
http://forum.xda-developers.com/galaxy-s3-neo/development/recovery-t-r-p-samsung-galaxy-s3-neo-gt-t2906840 In the third post, you must use the Odin Methode
Then, load an Rom at your external sdcard, at example resurection remix. Start your Phone in the recovery mode with [home] [Volumen up] [Power] and wipe dalvik, cache and data(easily of wipe and swish) and than install the rom
Thanx all..i tried all of your solutions.but finally i flashed stock firmware that have multifiles.that was helped me.:thumbup::beer:
When you have got an functional system, than you can install an custom recovery system, for Backups etc.
But when you will make it at the Rom, the rom must be rooted. The Tutorial is at my first post.
Related
At first, sorry for my english, i'm french...
Well, everything is in the title.
I am the owner of a Galaxy Tab4, WiFi, 16GB, SM-T530 model.
I wanted to root it, then install TWRP and a custom rom.
Via Odin, I install the TWRP recovery(2.8).
After I started the flash of a Omnirom. Everything went normally, but on reboot, I have the Samsung Galaxy Tab logo 4 well, but in the upper left corner marked,:
KERNEL IS NOT SEANDROID enforcing (in red)
Set Bit Warranty: kernel (yellow)
If I start in download mode, I have written:
ODIN MODE
PRODUCT NAME: SM-T530
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CBS)
SWREV RP: S1, T1, R1, A1, P1
UDC START
2 days ago, I traveled all the forums, downloaded everything I could find, flash all of things, makes "format data" wipe everything, etc .....
I can not go through Odin because it is no longer recognized.
Nothing works
It's awful, if someone can help me..........
Are you sure you're not able to get into download mode with pressing Volume Down + Home Button + Power Button? It should work if you press them until download mode appears.
Its for testing only. Havent read? But you should be able to go in download mode
Download stock rom, boot into download mode, flash stock Rom.
1019
Hi,
is there someone who can edit my post, I've solved my problem, and then want to put my thread in "solved".
I found a stock rom, then, with Odin, went threw every step.
my tab found a new life.
Thanks to all of you.
latriche said:
Hi,
is there someone who can edit my post, I've solved my problem, and then want to put my thread in "solved".
I found a stock rom, then, with Odin, went threw every step.
my tab found a new life.
Thanks to all of you.
Click to expand...
Click to collapse
Could you tell me exactly how you did it I have a galaxy tab 4 and its saying the same thing I used sammobile firmware but when I try to flash it fails after nand start
Hi guys. I'm having some problems with my Note 4. I previously have rooted the phone, but tried to use SuperSU to unroot it. I was getting errors loading some apps telling me that phone was still rooted so I attempted to do a factory reset on the phone. Somewhere along the road I appear to have messed up the firmware.
Basically, when powered on my phone states "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." If I open the recovery menu on my phone (power+home+vol. down) it says
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
I have tried using Kies (both versions) which say that my phone is not recognised in the emergency firmware recovery options, and the firmware upgrade option fails.
I have also tried using Odin using firmware N910FXXU1COJ3_N910FO2U1COJ1_O2U and N910FXXU1BOC3_N910FO2U1BOC1_O2U.
I am totally stuck for ideas. Is my phone bricked?
Unfortunately I can't upload screen shots due to my account status.
Kaetor said:
Hi guys. I'm having some problems with my Note 4. I previously have rooted the phone, but tried to use SuperSU to unroot it. I was getting errors loading some apps telling me that phone was still rooted so I attempted to do a factory reset on the phone. Somewhere along the road I appear to have messed up the firmware.
Basically, when powered on my phone states "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." If I open the recovery menu on my phone (power+home+vol. down) it says
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
I have tried using Kies (both versions) which say that my phone is not recognised in the emergency firmware recovery options, and the firmware upgrade option fails.
I have also tried using Odin using firmware N910FXXU1COJ3_N910FO2U1COJ1_O2U and N910FXXU1BOC3_N910FO2U1BOC1_O2U.
I am totally stuck for ideas. Is my phone bricked?
Unfortunately I can't upload screen shots due to my account status.
Click to expand...
Click to collapse
Do you use Stock Kernel or custom Kernel?
d4rkkn16ht said:
Do you use Stock Kernel or custom Kernel?
Click to expand...
Click to collapse
I'm not sure. I assume stock.
Kaetor said:
I'm not sure. I assume stock.
Click to expand...
Click to collapse
Judging for your answer I assume that you are kinda "new" to this ROOT & flashing ROM stuff?
Am I correct?
If you are "new" to this stuff....I suggest you read & re-read everything before "plunging deep into the abyss"
Now the answer,
ROOT & Stock 5.1.1 Lollipop Kernel is a NO GO!
By updating your KitKat 4.4.4/Lollipop 5.0.1 into Lollipop 5.1.1 (BTW COJ stock update IS Lollipop 5.1.1) will remove your ROOT access.
Re-ROOTing it will cause a bootloop....IF you didn't change your kernel into a "Permissive" one.
Try flashing a custom permissive kernel if you are going to keep ROOTed.
It'll fix your problem.
Download ODIN, then go to samfirmware and download some software for your phone. Use Odin to flash whatever firmware back onto your phone and start again.
Hi there!
I've looked all over the internet to solve my problem. I've tried many things to solve it but nothing seems to work.
Here's my problem:
After a failed installation of a custom rom on my Galaxy Note 4, it won't boot anymore. When I start my phone it says:
Kernel is not seandroid enforcing
Set warranty bit: kernel
Then it shows the 'Samsung'-logo. After that it reboots and so on.
If I go into recovery (Team Win Recovery Project v2.8.4.0):
I can acces all the data along with the external micro sd card. When I put a zip on it, I can install it, but that doesn't solve the problem. Using the internet I've tried these zips:
- Brick_Loop_FIX_afterRestoringBackup.zip
- cm-13-20151101-UNOFFICIAL-hlte.zip (this one didn't work)
- N910FXXU1C0H4-Deodexed_alexndr.zip
Wiping data or cleaning cache doesn't work either.
The only thing on my internal storage seems to be:
/sdcard TWRP
When I go into download mode:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-910F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (1)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
Phone information:
Model: SM-N910F
SSN: - N910FGSMH
Solution I'm looking for:
Just a working phone. Doesn't matter what ROM or root/non-root
Is there anyone who can help me solve this problem. I've tried a lot but nothing seems to work / I do not have the right knowledge.
Thanks in advance!!
Kelsey van der Heijden.
(Sorry for bad English)
Have you tried flashing an official Samsung ROM using Odin? You can get one here (filter by country)
http://www.sammobile.com/firmwares/database/SM-N910F
kelseyvdheijden said:
Hi there!
I've looked all over the internet to solve my problem. I've tried many things to solve it but nothing seems to work.
Here's my problem:
After a failed installation of a custom rom on my Galaxy Note 4, it won't boot anymore. When I start my phone it says:
Kernel is not seandroid enforcing
Set warranty bit: kernel
Then it shows the 'Samsung'-logo. After that it reboots and so on.
If I go into recovery (Team Win Recovery Project v2.8.4.0):
I can acces all the data along with the external micro sd card. When I put a zip on it, I can install it, but that doesn't solve the problem. Using the internet I've tried these zips:
- Brick_Loop_FIX_afterRestoringBackup.zip
- cm-13-20151101-UNOFFICIAL-hlte.zip (this one didn't work)
- N910FXXU1C0H4-Deodexed_alexndr.zip
Wiping data or cleaning cache doesn't work either.
The only thing on my internal storage seems to be:
/sdcard TWRP
When I go into download mode:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-910F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (1)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
Phone information:
Model: SM-N910F
SSN: - N910FGSMH
Solution I'm looking for:
Just a working phone. Doesn't matter what ROM or root/non-root
Is there anyone who can help me solve this problem. I've tried a lot but nothing seems to work / I do not have the right knowledge.
Thanks in advance!!
Kelsey van der Heijden.
(Sorry for bad English)
Click to expand...
Click to collapse
which version of custom rom were you trying to flash? 5.0.1 or 5.1.1? i suggest you download the same build stock firmware from sammobile and flash it with odin, kernel is seandroid enforcing means you have an unofficial kernel/rom/recovery and is nothing serious...first boot into recovery do factory reset, clear cache then without booting up the phone go directly into odin and flash stock firmware.
Hi all,
Please bear with me, I'm in way over my head here and don't understand most of what I've done. I was experimenting when I probably shouldn't have been.
So, I installed DarkLord's Note 7 kernel and rom. I found it to be quite buggy and am now wanting to wipe my phone and install Phronesis-N9005-N7-v6.0.
Problem is, when trying to boot into TWRP, I'm met with the the following:
ODIN MODE
Product name: SM-N9005
Current binary: Custom
System status: Official
Reactivation lock(kk): Off
Knox Kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: Enable (csb)
Rp swrev: S2, T2, R2, A3, P3
Write protection: Enable
UDC start
Downloading...
Do not turn off target
I've had it on for hours and it didn't do anything.
I managed to reboot it and it ran as it did before, in Darklords rom.
I read I have to install the official firmware and install it via Odin but I can't find anything about my device. On the back of it, it says:
SM N9005
FCC ID - A3LSMN9005
SNN - N9005GSMH
When I enter it into sammobile, nothing comes up.
Have I got this wrong? Should I be looking for something else?
You are booting to download mode not recovery .
Boot to recovery TWRP
#N9005 model firmware are on sammobile etc.
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Booting into recovery via TWRP manager just results in the same Odin screen for me
As for the firmware - I'm not really sure which region I should pick out of those. I just thought this was an international model, but then I downloaded an app called Phone INFO and it tells me it's Vietnam. Could this be because of the rom already on there? It does also say it's a Note 7, so I'm assuming it's incorrect.
TWRP manager
DO NOT USE just boot to recovery via the vol up home and power buttons as normal .
Copy Phronesis to ext sd card and flash as per instructions .
You have N9005 Pick your area /network where you are .
Phone Info can only go by what's on your phone and you flashed DarkLord's Note 7 firmware .
Booting via manager was a last resort. I was trying the usual way and it also resulting in the same thing.
Boot to download/ Odin mode flash stock rom .
Thanks JJEgan, I figured out how to use Odin3 and Odin mode, then install Phronesis. All is good now
before begin, im sorry for my bad english. now i had a big problem so far and make me crazy some times.
i have note 3 (ha3g) with TWRP 3.1.1-0 installed but not rooted yet. i have been istalled any Custom rom but stuck on boot, all of it! i trying SD version still same problems. if you have an idea please help me..
If you are on KitKat
First flash lollipop bootloader
I have root my note 3 ( hltexx , Qualcomm adreno 330) with Odin but I have problem to install TWRP, I try couple time and when I go to recovery I get message:
Fail to normal boot to recovery
Odin mode error
Downloading mode..
Now , I have a question: I try to install recovery with Odin and have no luck , try with Oficial TWRP app from Play store and it's the same problem..
Can I use Rom Manager from Play Store to download and install Rom without TWRP?
And why I can't install and have problem with Recovery?
@jjoeshua, what is the model # of the phone in download mode?
This is what I get when I try to go to Recovery:
Could not do normal boot
ODIN MODE
product name: sm-n9005
Current binary:custom
System status:custom
Reactivation lockff
Knox warranty void: 0x1 (4)
Qualcomm secureboot:enable (csb)
RPswrev:s2 , t2 , r2 , a3, p3
Secure download: enable
Udc start
Downloading. ....
Do not turn off target!!
This is my model number and firmware :
What Twrp to download?
Hltexx
Hlte
Ht3g
Twrp for now 3: https://twrp.me/samsung/samsunggalaxynote3qualcomm.html