How to install cwm or twrp Galaxy S4 ATT - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

I can't figure out how to do this at all. I know it's online somewhere, but for the life if me I can't figure out where. Someone please help!
Sent from my SAMSUNG-SGH-I337 using Tapatalk

I have I337UCUFNJ5
Sent from my SAMSUNG-SGH-I337 using Tapatalk

You have to sell your phone and buy an i9505. Then you can install TWRP or CWM on your Galaxy S 4.

I believe the ATT version of the s4 has a locked bootloader so flashing TWRP or CWM is not possible atm.

audit13 said:
I believe the ATT version of the s4 has a locked bootloader so flashing TWRP or CWM is not possible atm.
Click to expand...
Click to collapse
Is there any way to perform a nandroid-style backup/restore then?
I'd like to flash the latest stock ROM but would like a return path to what I currently have now if things go badly.

I would check out the Verizon s4 forum to confirm whether your bootloader is locked. If it is locked, there's very little you can install in terms of ROMs. Not sure about TWRP or CWM.
http://forum.xda-developers.com/galaxy-s4-verizon

Facing Same Problem
I'm Also Facing The Same Problem.
Is There Anybody To Tell Me That How Can I Check My Bootloader Status (Locked/Unlocked)

Shazilsonu said:
I'm Also Facing The Same Problem.
Is There Anybody To Tell Me That How Can I Check My Bootloader Status (Locked/Unlocked)
Click to expand...
Click to collapse
It's easy, if you have updated your phone to a newer version of Android, then your BL is locked.

NB1 4.4.2 is My Official ROM. I Updated It To NJ4 4.4.4 Using Android System Recovery And Then I Updated It 5.0.1 Lollipop Via Same Way.
I Think My Bootloader Is Locked.

Bootloader on LP is definitely locked.

So What Should I Do "audit13"

Once the bootloader is locked, you will need to use safestrap to flash files. Also, you'll be limited to tw-based custom ROMs.
http://forum.xda-developers.com/showthread.php?t=2428254

Safestarp Is not Working Dude....
I Tried To Install Safestarp And I Have Lost My Android System Recovery.
Now When I Boot My Device Into Recovery Mood It Takes An Error And My Device Goes to Download Mood.
My Device Has No Recovery Now.

This may help: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642

Thanx Dude.
Thanx for helping.

Did you fix it?

Soled
audit13 said:
Did you fix it?
Click to expand...
Click to collapse
I Have Soled My Galaxy S4 AT&T i337.
Now I'm Looking For Galaxy Note 3.
So What Model Number I Should Buy Which Can Be Rooted Easily And Has Unlocked Bootloader.

I believe the att version of note 3 also has a locked bootloader. Get the T-Mobile version or the Canadian version.

Galaxy Note 3
audit13 said:
I believe the att version of note 3 also has a locked bootloader. Get the T-Mobile version or the Canadian version.
Click to expand...
Click to collapse
Hi Dude.
Whats Up?
I Have Bought Samsung Galaxy Note 3 (SM-9005)
I Have Rooted It But I Want To Downgrade It To It's Official ROM And Than Update It Step By Step After Rooting My Device.
Whats Your Opineon About.

All you need to run OTA updates is use the unroot option from the root program and have a stock recovery. OTA updates will not work on a rooted system.
The quickest way to update your phone to the latest ROM would be to flash the lastest stock ROM from sammobile and then check for OTA updates.
http://www.sammobile.com/firmwares/database/SM-N9005/

Related

Latest Update for AT&T I337?

I need latest update for Samsung Galaxy S4 AT&T I337 model as I live outside USA and for some reason when I click on Software Update (Settings -> About device) nothing happens.
Below is the details for Samsung Galaxy S4 AT&T I337 phone
Model Number - SAMSUNG-SGH-I337
Android Version - 4.3
Baseband version - I337UCUAMDL
Kernel version - 3.4.0_StockUp_tw_4.3
Build Number - StockUp MJ6 v1.1
I need some guidance on how I can update my phone to the latest updates that is available for AT&T I337 model
Look forward to getting some tips and guidance on this matter
Search for mk2 tar files
jd1639 said:
Search for mk2 tar files
Click to expand...
Click to collapse
I found the required file from this forum which was redirected to another download site as shown below
http://www.androidfilehost.com/?fid=23329332407566574
Do you I use the following instructiuon that is found in this forum
http://forum.xda-developers.com/showthread.php?t=2621279
1.POWER OFF YOUR PHONE AND GO TO DOWNLOAD/ODIN MODE ( VOLDOWN+HOME+POWER)
2.DOWNLOAD ODIN (http://forum.xda-developers.com/attachment.php?attachmentid=2537619&d=1390629800) AND MAKE SURE U HAVE THE LATEST DRIVER INSTALL FROM SAMSUNG KIES
3.DOWNLOAD AND EXTRACT I337MK2_Combined_Odin_Tar FILES
4.START ODIN AND FOLLOW IN ORDER WHERE EACH FILE SHOULD GO INTO ODIN SLOT....
I need confirmation if the above instruction is correct to get the latest update for Samsung Galaxy S4 AT&T i337 model?
You're currently on mdl firmware. This firmware allows you to put on a custom recovery and flash roms. Are you sure you want to update? You will no longer have the ability to put on a custom recovery.
jd1639 said:
You're currently on mdl firmware. This firmware allows you to put on a custom recovery and flash roms. Are you sure you want to update? You will no longer have the ability to put on a custom recovery.
Click to expand...
Click to collapse
Well not interested in custom recovery as long as I get the latest update that looks like offical Samsung Galaxy S4 updates for i337 model. Will I be getting latest update for future updates?
userS4i337 said:
Well not interested in custom recovery as long as I get the latest update that looks like offical Samsung Galaxy S4 updates for i337 model. Will I be getting latest update for future updates?
Click to expand...
Click to collapse
Yes to all your question.....i337MK2 tar md5 contain 4 seperated files ( first released ) follow the image guide where u have to place into ODIN SLOT ....the one that said combined ALL IN ONE ( newest released ) mean that u just flash into PDA ODIN SLOT ONLY.....just follow that guide on second post it would get u to latest ATT MK2 4.3 firmware. But like @jd1639 said with MDL firmware u can install anything even 4.4.2 rom and also there is alot of custom stock rom without ATT bloatware out there that u can install .....goodluck and PM me if u need more help. FYI if u got helped by someone please hit THANK button to show your appreciation ....:good::good:
I'll update my S4 to the latest update and you can send me yours. I'd kill for mdl firmware...
Sent from my SAMSUNG-SGH-1337 using Tapatalk
That is my another question regarding ATT bloatware? Will the combined TAR file contain the ATT bloatware?
Is there a way I can remove the ATT bloatware after I have upgraded the phone, as I find the ATT bloatware annoying
userS4i337 said:
That is my another question regarding ATT bloatware? Will the combined TAR file contain the ATT bloatware?
Is there a way I can remove the ATT bloatware after I have upgraded the phone, as I find the ATT bloatware annoying
Click to expand...
Click to collapse
Yes it contains all the bloatware, another reason not to upgrade and flash custom roms.
Edit, it has not been mentioned yet but one you upgrade you can not go back to a previous firmware.
When I upgrade to MK2, does this mean I will need to perform factory reset and all my existing app will be gone or will the app remain on the phone even after the upgrade.
I will do the backup before the upgrade but at the moment when I connect the Phone to the PC, it would mot pick up so maybe I will need the latest software driver, is that correct? I have the same problem with Kies which does not recognise when phone is connected.
Any suggestion would be great.
userS4i337 said:
When I upgrade to MK2, does this mean I will need to perform factory reset and all my existing app will be gone or will the app remain on the phone even after the upgrade.
I will do the backup before the upgrade but at the moment when I connect the Phone to the PC, it would mot pick up so maybe I will need the latest software driver, is that correct? I have the same problem with Kies which does not recognise when phone is connected.
Any suggestion would be great.
Click to expand...
Click to collapse
When you Odin I believe you lose everything anyway.
rbedell said:
When you Odin I believe you lose everything anyway.
Click to expand...
Click to collapse
Not always, most times a factory reset is needed to clear the phone of old apps and data. Root, is lost, but apps that require root can still be present which can become a problem when root is no longer available.
A friend of mine has a rooted MDL firmware s4 and wants a rooted stock version of the latest update. Can someone please provide a link to the latest flashable stock ROM for the att s4? Thanks.
Sent from my Nexus 5 using xda app-developers app
Henrock11 said:
A friend of mine has a rooted MDL firmware s4 and wants a rooted stock version of the latest update. Can someone please provide a link to the latest flashable stock ROM for the att s4? Thanks.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Why doesn't your friend flash a custom rom instead
He wants a stock touchwiz ROM. If their is a custom ROM based on the latest firmware then by all means direct me to it and I'll flash that for him. Thanks.
Sent from my Nexus 5 using xda app-developers app
Henrock11 said:
He wants a stock touchwiz ROM. If their is a custom ROM based on the latest firmware then by all means direct me to it and I'll flash that for him. Thanks.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
He's on mdl which allows a custom recovery and easy flashing of roms. If he upgrades to mk2, the latest, he'll lose that ability. Try this http://forum.xda-developers.com/showthread.php?p=47713264
Right, we have a custom recovery and an unlocked boot loader and I flashed an older build of that Google edition ROM, but he just really wants the ability to move his apps2sd. I didn't see a mention of the apps2sd feature in the change logs. Thanks for replying so quickly.
Sent from my Nexus 5 using xda app-developers app

[Q] Bootloader unlock for SGH-I337Z AIO WIRELESS

Hello all. I am new to this site but I enjoy it a lot and I learned a lot as well from the threads. I got AIO wireless service that has the I337 model galaxy s4. I successfully rooted my phone with Kingo root. After rooting my phone I tried to install a customer recovery on it with no success no matter what I did ( I tried every imaginable scenario). In the process of rooting my phone my kernel got damaged and my Wi-Fi stopped working. I am trying to re flash the phone with custom multi carrier rom but I think that my boot loader is locked and that is the reason I can’t install the recovery. If anyone can guide me in the right direction where I can unlock the boot loader would be amazing. Thank you all in advance
1. This section isn't for AIO wireless but I don't know if there is a section for it.
2. There is currently no way to unlock the boot loader.
3. If you want to restore it back to stock read about it in my signature.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
4tele said:
Hello all. I am new to this site but I enjoy it a lot and I learned a lot as well from the threads. I got AIO wireless service that has the I337 model galaxy s4. I successfully rooted my phone with Kingo root. After rooting my phone I tried to install a customer recovery on it with no success no matter what I did ( I tried every imaginable scenario). In the process of rooting my phone my kernel got damaged and my Wi-Fi stopped working. I am trying to re flash the phone with custom multi carrier rom but I think that my boot loader is locked and that is the reason I can’t install the recovery. If anyone can guide me in the right direction where I can unlock the boot loader would be amazing. Thank you all in advance
Click to expand...
Click to collapse
seedeh said:
1. This section isn't for AIO wireless but I don't know if there is a section for it.
2. There is currently no way to unlock the boot loader.
3. If you want to restore it back to stock read about it in my signature.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
This section is for all I337 variants. He has a different model than the AT&T I337, so that restore tar in your signature won't work and the bootloader may be unlocked for him depending on his carrier's choice.
EDIT: Here is the I337Z stock firmware. http://forum.xda-developers.com/showthread.php?t=2448794
It says they did not get a recovery working, you may be stuck to Safestrap 3.65
DeadlySin9 said:
This section is for all I337 variants. He has a different model than the AT&T I337, so that restore tar in your signature won't work and the bootloader may be unlocked for him depending on his carrier's choice.
EDIT: Here is the I337Z stock firmware. http://forum.xda-developers.com/showthread.php?t=2448794
It says they did not get a recovery working, you may be stuck to Safestrap 3.65
Click to expand...
Click to collapse
Ah. He said I337Z in the title but not the post so I was confused.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Thank you
I guess I need to do some more reading about safe strap...If you could point me in the right direction..it would be good...:good:
My phone is i337z
I Typed my mistake i337 in the body of the message.
Got my Phone to work with safestrap
Thank you again! I got my phone to work with safe strap 3.65! I loaded the Intika Locky S4 Rom v1.0 everything seems to work :good:
4tele said:
Thank you again! I got my phone to work with safe strap 3.65! I loaded the Intika Locky S4 Rom v1.0 everything seems to work :good:
Click to expand...
Click to collapse
4tele, I assume you used the AT&T Safestrap? I was not able to get AT&T Safestrap 3.65, 3.71, or 3.72 to work on my I337Z from Cricket (AIO) with KitKat 4.4.2, build number KOT49H.I337ZTUUBNE2. The app says it installed successfully, but it never seems to activate. Are you on KitKat? If so, what build number?
Anyone know if it's possible to flash the AT&T I337 MF3 firmware on the I337Z then try to unlock the bootloader using the process described below? http://forum.xda-developers.com/showthread.php?t=2387577
I used the AT&T safestap 3.65 but my phone was on MH1 firmware 4.2.2 and it worked, if you are on kitkat probably need to use the latest safestap I guess
guys check this out , maybe one developer decides to take advantage of this and help us out http://www.droid-life.com/2014/08/07/moto-x-bootloader-unlock-qualcomm/

Looking for Canadian i337m users.

Hello all. First off I have a I337m with baseband NE1. I never see this mentioned anywhere and wanted to know what I can do with this phone.
I've rooted already (with towelroot) and wanted to get a custom bootloader. I've read and read then read somemore but found too many mixed staments regarding this.
Can I install a custom bootloader (say through goo manager) without worries or is there more to it? Does it completely overwrite the stock bootloader?
Do I need to worry about Loki?
Can we use other carrier ROMs?
Is it safe to say that everything in this sub forum works with my device?
Im familiar with flashing and the likes coming from the S2 with CM10.2 but there are too many varients and mixed statments (old to new methods) and I can't for the life of me find direction.
This is what I know about the i337m, mind you I don't have the device:
You can root using chainfires cf-auto root
Use trwp manager to install twrp
You can flash any rom here and you don't need Loki
Sent from my Nexus 5 using XDA Free mobile app
Bluntified said:
Hello all. First off I have a I337m with baseband NE1. I never see this mentioned anywhere and wanted to know what I can do with this phone.
I've rooted already (with towelroot) and wanted to get a custom bootloader. I've read and read then read somemore but found too many mixed staments regarding this.
Can I install a custom bootloader (say through goo manager) without worries or is there more to it? Does it completely overwrite the stock bootloader?
Do I need to worry about Loki?
Can we use other carrier ROMs?
Is it safe to say that everything in this sub forum works with my device?
Im familiar with flashing and the likes coming from the S2 with CM10.2 but there are too many varients and mixed statments (old to new methods) and I can't for the life of me find direction.
Click to expand...
Click to collapse
I have the same phone on Telus... as far as the "custom bootloader" I think you really mean custom recovery, I use TWRP version 2.7. You can also use Philz recovery or CWM but I perfer TWRP as it hasnt given me any issues. If you load TWRP don't go for the latest version as I have seen guys have problems with the latest and greatest.
Once you have twrp on your phone... before you do anything else... make a backup in twrp of your current rooted stock rom so you have a starting point. In twrp, I like to do all backups to the external sd card as there may come a time where you do a factory wipe... and poof its gone...
In the developement thread... there is a rom called Mapleleaf works very well on this phone... I run it myself with the googy-max3 kernel.
If you decide to flash anything else... make sure it will work for i337m, I have seen people get into trouble flashing things meant for the US version (i337). Our bootloader is unlocked so you don't need saftey strap or loki or other things that the i337 users need.
When in doubt... search the forum... if you find nothing... ask before you do anything strange.
As far as the bootloader goes... try to stay on your current one.. mine is still MK6. Once the bootloader is updated there is no going back... period.....
This helped a lot man, I appreciate it.
So just to clarify, can I use goo manager for the recovery or should I use Odin? And is there any version in particular [TWRP] that I should use? What version are you running?
How do I check my bootloader version?
Sent from my SGH-I337M using XDA Free mobile app
Bluntified said:
This helped a lot man, I appreciate it.
So just to clarify, can I use goo manager for the recovery or should I use Odin? And is there any version in particular [TWRP] that I should use? What version are you running?
How do I check my bootloader version?
Sent from my SGH-I337M using XDA Free mobile app
Click to expand...
Click to collapse
You can use goo manager or Odin. Just make sure you have the right version. FYI twrp 2.5.0.2 is the most reliable version that I have used for this device.
Tapatalked from California Custom Chrome M&M I337m
If you want an older version of twrp use odin... goomanager will likely try to load the latest version... as for checking which bootloader version you have, download the app phone info from the play store.... here... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
my version of twrp is 2.6.3.1 and it works fine... as stated... 2.5 is also recommended by some of the devs....
My bootloader ends in NE1, does that pose a problem - I rarely see it mentioned anywhere? I took the OTA in case anyone is wondering. Basically, can I flash something that's not NE1?
Also, I've been reading that the ROM that's going to be flashed needs to be the same Android Version as the current one on the phone, is this still true?
Bluntified said:
My bootloader ends in NE1, does that pose a problem - I rarely see it mentioned anywhere? I took the OTA in case anyone is wondering. Basically, can I flash something that's not NE1?
Also, I've been reading that the ROM that's going to be flashed needs to be the same Android Version as the current one on the phone, is this still true?
Click to expand...
Click to collapse
This will mean you can flash any rom (for i337m) that is 4.4.2 version of android. You can always go up on android version to bootloader but you can't go down versions unless the bootloader is an earlier version. Since most roms are 4.4.2 or higher, I don't think this should be an issue, not many people are looking to go to an older version of android..... bigger... better and all that...
Gage_Hero said:
This will mean you can flash any rom (for i337m) that is 4.4.2 version of android. You can always go up on android version to bootloader but you can't go down versions unless the bootloader is an earlier version. Since most roms are 4.4.2 or higher, I don't think this should be an issue, not many people are looking to go to an older version of android..... bigger... better and all that...
Click to expand...
Click to collapse
Is this true, bc I have a bell galaxy 4, 4.4.2 i337m NE1 , I want to install a custom recovery,
but I thought my bootloader was locked because its says write protection enabled on the download screen which I thought
meant the bootloader was locked.
strakn said:
Is this true, bc I have a bell galaxy 4, 4.4.2 i337m NE1 , I want to install a custom recovery,
but I thought my bootloader was locked because its says write protection enabled on the download screen which I thought
meant the bootloader was locked.
Click to expand...
Click to collapse
The I337M bootloader is not locked. What you are seeing when you boot after rooting is that you tripped KNOX since new bootloaders are closely tied to KNOX so any violation = tripped KNOX.
I have I337M from Telus with NE1 bootloader (4.4.2) and custom Rom PhoeniX. Everything is great except a newly discovered TD Bank App and inability to link my TD Visa to it...

Is bootloader unlocked?

Hey all.
I've a question. In GT-i9500, is there the need to unlock bootloader as in Motorola devices before flashing custom ROMs. Or it comes with it's bootloader pre-unlocked?
Would be very glad on your response
Thank You!
munimjaffer said:
Hey all.
I've a question. In GT-i9500, is there the need to unlock bootloader as in Motorola devices before flashing custom ROMs. Or it comes with it's bootloader pre-unlocked?
Would be very glad on your response
Thank You!
Click to expand...
Click to collapse
in I9500 we can update bootloader and go back to old without problems and we can flash roms without need to unlock
Verizon and AT&T devices usually have locked bootloaders. Everything else should be unlocked.
Ngadhnjim said:
in I9500 we can update bootloader and go back to old without problems and we can flash roms without need to unlock
Click to expand...
Click to collapse
thanks alot for ur reply
GDReaper said:
Verizon and AT&T devices usually have locked bootloaders. Everything else should be unlocked.
Click to expand...
Click to collapse
Then we should first of all unlock bootloader before flashing roms?
Unless the S4 is a US model sold by AT&T or Verizon, which yours isn't, the bootloader will be unlocked. That means being able to update the bootloader, radio, and installing custom ROMs, as previously stated. Keep in mind the following: Samsung does not use fastboot, thus any commands you could use on a Motorola device will not work on a Samsung device. You will have to use Odin.
munimjaffer said:
Then we should first of all unlock bootloader before flashing roms?
Click to expand...
Click to collapse
i dont known for verzion ,he ask for i9500
munimjaffer said:
Then we should first of all unlock bootloader before flashing roms?
Click to expand...
Click to collapse
I-9500 came with factory unlocked bootloader.
If your phone really is i-9500 as you said,
install the custom recovery like TWPR or CWM via odin and
flash the custom rom of your choice via the custom recovery.
sway8966 said:
I-9500 came with factory unlocked bootloader.
If your phone really is i-9500 as you said,
install the custom recovery like TWPR or CWM via odin and
flash the custom rom of your choice via the custom recovery.
Click to expand...
Click to collapse
Ok thanks
l have a question if my i9500 says secure download enabled does that mean its bootloader locked +++
Asked and answered already in this thread. Unless your S4 is an SGH-I337 or SCH-I545 (AT&T and Verizon respectively) your bootloader will not be locked.

Flashing a custom ROM

Please friends am very new here and I want to flash a custom ROM but dont know which rom to go for, I am using Samsung galaxy s4 att baseband 1337UCUFNJ5. I have root the device with kingroot but I don't know whether flashing CWM/TWRP recovery will be safe. Please I need a guide because I am been stocked at Android V. 4.4.4 KitKat and am not receiving OTA update from att
CAMERON1988 said:
Please friends am very new here and I want to flash a custom ROM but dont know which rom to go for, I am using Samsung galaxy s4 att baseband 1337UCUFNJ5. I have root the device with kingroot but I don't know whether flashing CWM/TWRP recovery will be safe. Please I need a guide because I am been stocked at Android V. 4.4.4 KitKat and am not receiving OTA update from att
Click to expand...
Click to collapse
First off you're in the wrong forum. Next, you're on the NJ5 bootloader so you can only install safe strap recovery and only boot custom ROM that is based on Samsung touch wiz. I suggest finding an ODIN file that'll update you to a newer firmware. OTA probably isn't working because you've rooted the phone.
Thanks man
Sent from my SAMSUNG-SGH-I337 using XDA-Developers Legacy app

Categories

Resources