Can anyone know, how to increase speaker volume on Resurrection Remix LP 5.5.9 is there anyway to increase it???..
Thanks in advance...
Yes, it can be done. You need root access in ES File Explorer (or any other File Explorer). Find the mixer_paths.xml file under system\etc folder. Now open the mixer_paths.xml to edit the following parameters.
Path of file:
system\etc\mixer_paths.xml
Open the file and scroll down to find the following lines :
<ctl name =”RX1 Digital Volume” value=’84’ />
<ctl name =”RX2 Digital Volume” value=’84’ />
<ctl name =”RX3 Digital Volume” value=’84’ />
Now edit the value 84 to 90 but make sure that value beyond this may damage the speakers.
<ctl name =”RX1 Digital Volume” value=’90’ />
<ctl name =”RX2 Digital Volume” value=’90’ />
<ctl name =”RX3 Digital Volume” value=’90’ />
After, changes have been made, save the file and reboot the mobile.
Now speaker volume will be increased.
---------- Post added at 09:10 PM ---------- Previous post was at 09:08 PM ----------
Yes, it can be done. See my detailed reply.
Related
I have the Moto E 2015 LTE (single sim eu version) and had a hard time hearing what the other person were saying during calls.
This was a problem when trying to talk "normally", with the phone against my ear. (no headphones or speakerphone)
After some googling and testing i finally found a way to fix this.
This fix requires a working recovery (i used TWRP), but rooting is NOT required.
(rooting disables my camera)
There is a file called mixer_paths.xml located in /system/etc/ that contains the answer to my problem, witch im now sharing with the rest of the world.
I made the following changes:
(line 23-25)
<ctl name="RX1 Digital Volume" value="92" /> (was 84)
<ctl name="RX2 Digital Volume" value="92" /> (was 84)
<ctl name="RX3 Digital Volume" value="92" /> (was 84)
(line 34-35)
<ctl name="DEC1 Volume" value="92" /> (was 84)
<ctl name="DEC2 Volume" value="92" /> (was 84)
(line 50)
<ctl name="Speaker Boost" value="ENABLE" /> (was "DISABLE)
(line 486)
<ctl name="ADC1 Volume" value="8" /> (was 7)
(line 493)
<ctl name="RX1 Digital Volume" value="90" /> (was 84)
(line 504)
<ctl name="ADC1 Volume" value="8" /> (was 7)
If you are rooted you can edit the mixer_paths.xml in a root file manager, but you will have to mount /system as read/write first. You probably will still have to boot into recovery and wipe cashe.
Google is your friend for such endevours.
Included below are two files, the original one (default) and the modified version with the above mentioned value changes.
Install instructions:
To install, reboot your device into recovery mode and mount system partition.
Using the recovery mode file browser, find and rename the current mixer_paths.xml (change name to mixer_paths.xml.bak)
Connect your device to your computer and launch a ADB terminal.
Make sure youre in the directory where you unpacked the mixer_paths.xml
type these commands:
adb push mixer_paths.xml /system/etx/mixer_paths.xml
Use the recovery mode to chmod the new file, chmod 755 should work, but i did chmod 777.
Use the recovery mode to wipe cashe.
reboot your device.
Restore instructions
To restore to original, boot to recovery, delete your modified mixer_paths.xml file and rename mixer_paths.xml.bak to mixer_paths.xml.
When youre done, wipe cashe and restart.
In case you deleted it instead of renaming it, download the default one below and follow the install procedure.
A warning; too high volume will damage your device and boosting the volume might degrade your audio quality.
reserved
General help Moto E
I have tried Google but I'm still lost (sorry). I am using TWRP and my phone is a XT1527 Moto E (2nd) Surnia 2015, so can I use your file or should I edit the existing (phone) file?
General: Do I use TWRP on my phone (in recovery mode) to mount the System on the phone (SD or internal) memory?
Thanks in advance,
Glen
1: Download the file from here: https://www.gammerson.com/downloads/lineageos-audi-fix(Gammerson.com).zip
2: Transfer the zip file to your device’s storage;
2: Flash it with TWRP;
3: Wipe Dalvik Cache;
4: Restart your device;
5: Have Fun.
All the credits to the user hemanlu, that send me a private message with this procede.
Thanks if it works!
Will this also work on epic rom?
rouxbee said:
Will this also work on epic rom?
Click to expand...
Click to collapse
Dont know
I would advise against this method, as it more or less disconnects audio configurations completely.
You are better off increasing the /system/etc/mixer_paths_tasha.xml handset ctl's digital volume slightly.
Probably not a good idea to go over default 84, as there may be good reason for Xiaomi setting this as low as 80.
Code:
<path name="handset">
<ctl name="SLIM RX0 MUX" value="AIF_MIX1_PB" />
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="RX INT0_1 MIX1 INP0" value="RX0" />
<ctl name="RX INT0 DEM MUX" value="CLSH_DSM_OUT" />
<ctl name="EAR PA Gain" value="G_0_DB" />
[B] <ctl name="RX0 Digital Volume" value="84" />[/B]
<ctl name="PIEZO Port Switch" value="1" />
</path>
Strangely enough when I flash this the calls are perfectly hearable but all of my system sounds / alarms / ringtones are not working anymore.
Does anyone has a solution for this?
EDIT:
I did a 'upgrade' using the latest LOS rom (the same I used) and now the in call volume and the sound works... without flashing the above zip...
Strange but glad it works again
Tiago A said:
1: Download the file from here: https://www.gammerson.com/downloads/lineageos-audi-fix(Gammerson.com).zip
2: Transfer the zip file to your device’s storage;
2: Flash it with TWRP;
3: Wipe Dalvik Cache;
4: Restart your device;
5: Have Fun.
All the credits to the user hemanlu, that send me a private message with this procede.
Thanks if it works!
Click to expand...
Click to collapse
It does not work can you maybe attach the file
Hi, I have Galaxy S5 klte and Resurrection Remix 5.8.3 (latest version) installed but the microphone does not work correctly. I can record but when I listen to the recording the sound ist very quiet and unclear. How can I fix this problem? Thanks for help!
With my Phone on 6.0.0 at android 8.1.0 is exactly the same.
find mixer_paths.xml in /system/etc/ and modify the "Recording scenario" values to your needs
jizzy001 said:
find mixer_paths.xml in /system/etc/ and modify the "Recording scenario" values to your needs
Click to expand...
Click to collapse
Any examples?
fparri said:
Any examples?
Click to expand...
Click to collapse
The file can be located in /system/etc or /system/vendor/etc (in my case RR 6.0.0 - G900F)
open up the file and edit the values by your needs after editing save it,
set the permissions to -rw-r--r-- (644) and reboot your device
this is my modified version of the original file (just the microphone part)
the values are normaly aroud 85-93...and that is pretty low
Down below the bold values are the ones that should be modified
Code:
<!-- ================================================================ -->
<!-- Recording Scenario -->
<path name="rec-main-mic">
<path name="main-mic" />
<ctl name="DEC2 Volume" value="[B]115[/B]" />
</path>
<path name="rec-sub-mic">
<path name="sub-mic" />
<ctl name="DEC4 Volume" value="[B]110[/B]" />
</path>
<path name="rec-headset-mic">
<path name="ear-mic" />
<ctl name="ADC2 Volume" value="14" />
<ctl name="DEC5 Volume" value="[B]92[/B]" />
</path>
<path name="rec-stereo-mic">
<ctl name="Main Mic Delay" value="4" />
<path name="sub-main-mic" />
<ctl name="DEC2 Volume" value="[B]110[/B]" />
<ctl name="DEC4 Volume" value="[B]110[/B]" />
</path>
<path name="rec-high-gain-main-mic">
<path name="main-mic" />
<ctl name="DEC2 Volume" value="[B]68[/B]" />
</path>
<path name="rec-high-gain-sub-mic">
<path name="sub-mic" />
<ctl name="DEC4 Volume" value="[B]68[/B]" />
</path>
<path name="rec-high-gain-headset-mic">
<path name="ear-mic" />
<ctl name="ADC2 Volume" value="14" />
<ctl name="DEC5 Volume" value="[B]84[/B]" />
</path>
<path name="rec-high-gain-stereo-mic">
<path name="sub-3rd-mic" />
<ctl name="DEC2 Volume" value="[B]72[/B]" />
<ctl name="DEC4 Volume" value="[B]72[/B]" />
</path>
<path name="rec-NS-mic-interview">
<ctl name="ES705 TX1 Enable" value="1" />
<path name="main-sub-mic" />
<ctl name="DEC2 Volume" value="[B]110[/B]" />
<ctl name="DEC4 Volume" value="[B]110[/B]" />
<ctl name="ES705-AP Tx Channels" value="One" />
<ctl name="Internal Route Config" value="7" />
</path>
<path name="rec-NS-mic-conversation">
<ctl name="ES705 TX1 Enable" value="1" />
<path name="main-sub-mic" />
<ctl name="DEC2 Volume" value="[B]112[/B]" />
<ctl name="DEC4 Volume" value="[B]112[/B]" />
<ctl name="ES705-AP Tx Channels" value="One" />
<ctl name="Internal Route Config" value="8" />
</path>
<path name="rec-NS-mic-conference">
<path name="main-sub-mic" />
<ctl name="DEC2 Volume" value="[B]110[/B]" />
<ctl name="DEC4 Volume" value="[B]110[/B]" />
</path>
<!-- end of Recording Scenario -->
<!-- ================================================================ -->
Thanks a lot! I've bookmarked your reply. I'm going to try that tonight at home
fparri said:
Thanks a lot! I've bookmarked your reply. I'm going to try that tonight at home
Click to expand...
Click to collapse
Report if it works
I have the same problem in s5 G900H but i cant find recording scenario in it. Would u plz help me
---------- Post added at 11:54 PM ---------- Previous post was at 11:30 PM ----------
swppy said:
I have the same problem in s5 G900H but i cant find recording scenario in it. Would u plz help me
Click to expand...
Click to collapse
@jizzy001
jizzy001 said:
The file can be located in /system/etc or /system/vendor/etc (in my case RR 6.0.0 - G900F)
open up the file and edit the values by your needs after editing save it,
set the permissions to -rw-r--r-- (644) and reboot your device
this is my modified version of the original file (just the microphone part)
the values are normaly aroud 85-93...and that is pretty low
Down below the bold values are the ones that should be modified
Click to expand...
Click to collapse
I've got the same problem on an Galaxy S5 (SM-G900W8 ) with crDroid. I think both ROMs come from Lineage OS and although I haven't tried it I'll bet Lineage 15.1 has the same problem.
I'd like to give it a try, but I can't seem to modify the file. I mixer_paths.xml in /system/vendor/etc, but when I try to edit it I get a message that it's a read only file system.
Permissions on the directories look OK:
/system 755
/system/vendor/ 755
/system/vendor/etc 755
I also tried to create a file with "touch" in /system/vendor/etc and that failed-confirming the whole directory can not be written. Can someone please tell me what I'm doing wrong.
rootkitty said:
I've got the same problem on an Galaxy S5 (SM-G900W8 ) with crDroid. I think both ROMs come from Lineage OS and although I haven't tried it I'll bet Lineage 15.1 has the same problem.
I'd like to give it a try, but I can't seem to modify the file. I mixer_paths.xml in /system/vendor/etc, but when I try to edit it I get a message that it's a read only file system.
Permissions on the directories look OK:
/system 755
/system/vendor/ 755
/system/vendor/etc 755
I also tried to create a file with "touch" in /system/vendor/etc and that failed-confirming the whole directory can not be written. Can someone please tell me what I'm doing wrong.
Click to expand...
Click to collapse
Just mount the system partition R/W find some tutorial or app how to mount it
swppy said:
I have the same problem in s5 G900H but i cant find recording scenario in it. Would u plz help me
---------- Post added at 11:54 PM ---------- Previous post was at 11:30 PM ----------
@jizzy001
Click to expand...
Click to collapse
Can you send me the whole file or paste iz somewhere?
jizzy001 said:
Just mount the system partition R/W find some tutorial or app how to mount it
Can you send me the whole file or paste iz somewhere?
Click to expand...
Click to collapse
Im not able to snd it through this way would you give ur email address ???
swppy said:
Im not able to snd it through this way would you give ur email address ???
Click to expand...
Click to collapse
[email protected]
Sent from my SM-G900F using Tapatalk
jizzy001 said:
[email protected]
Click to expand...
Click to collapse
Plz check ur email bruh
I want to give some more power to usb and bluetooth headphones. I've read that I can do it by editing mixer.paths file, but I couldn't find tutorial matching to my file. Can someone help me, by editing my file or give me own files (edited and original). I have le pro 3 x722 with paranoid 7.3.1 (nougat)
ctl name="RX1 Digital Volume" value="99" />. org. 84
<ctl name="RX2 Digital Volume" value="99" />
<ctl name="ANC HPHL Enable Switch" value="1" />
<ctl name="ANC HPHR Enable Switch" value="1" />
<ctl name="HPHL Volume" value="35" /> org. 20
<ctl name="HPHR Volume" value="35" />
This is my config, and its work. I changed All 3 paths with "headphones" in name
hello guys sorry for my bad English, I bring this little contribution to the forum.
I have p9-Lo9, but the sound is a bit low, I come from an m8 htc and I like it to sound louder than normal, So look in other forums, the way to do it without any results, only exists for the p9 lite, I found a way to do it without using applications, I managed to modify a file of the system that allows us to alter the volume standards,
requirements
have the rooted phone and a file explorer that allows us to enter the system folder
1- for android 6
Download the file mixer_volumes_EVA android 6 or 7 and copy it to system / etc / audio / hi6402.
2- for android 7
enter the root of the whole system, find the folder product / etc / audio / hi6402.
decompress the downloaded files and move them, that's all maybe in the future it could be in oreo, at the moment it does not work modifying the file
links
android 6
https://mega.nz/#!j8Ry1I7R!EAB-OiIW0Q39nhZb4ItzKkLyqwF7jRP9EITeMxBdWVw
android 7
https://mega.nz/#!bkYUCQLY!SHNcAUO9KlWi-hWM1O_o1k_ysHD__fSqdoBHw0yA7_Q
android 8
https://mega.nz/#!G0RwQIwK!Ew1bE4M-DiWhPszOv0owE81ydSc6fPrUD62QlXZqlm8
updated for oreo android
I do not speak English sorry if you do not understand some thing
already works for oreo
luis taylor said:
already works for oreo
Click to expand...
Click to collapse
Do you keep a patent on that or why you don't describe how you do it for Oreo?
hi
zgfg said:
Do you keep a patent on that or why you don't describe how you do it for Oreo?
Click to expand...
Click to collapse
I will update the thread
Headphones volume Oreo
zgfg said:
Do you keep a patent on that or why you don't describe how you do it for Oreo?
Click to expand...
Click to collapse
Oreo
root/ODM/etc/audio/hi6402
Save original mixer_volumes_EVA_ce.xml
Edit
<ctl name="HPL PGA GAIN" value="12" />
<ctl name="HPR PGA GAIN" value="12" />
Replace it
<ctl name="HPL PGA GAIN" value="27" />
<ctl name="HPR PGA GAIN" value="27" />
Copy root/ODM/etc/audio/hi6402
Check permissions. -rw-r--r-- ( 644 ).
Reboot
cunaja said:
Oreo
root/ODM/etc/audio/hi6402
Save original mixer_volumes_EVA_ce.xml
Edit
<ctl name="HPL PGA GAIN" value="12" />
<ctl name="HPR PGA GAIN" value="12" />
Replace it
<ctl name="HPL PGA GAIN" value="27" />
<ctl name="HPR PGA GAIN" value="27" />
Copy root/ODM/etc/audio/hi6402
Check permissions. -rw-r--r-- ( 644 ).
Reboot
Click to expand...
Click to collapse
For some reason (?) I had problems to make a copy of the xml file. Every time I tried, it copied but as an empty file, 0 B.
Eventually, I copied to SD card and back, to get a correct copy, 80,17 KB
hi
cunaja said:
Oreo
root/ODM/etc/audio/hi6402
Save original mixer_volumes_EVA_ce.xml
Edit
<ctl name="HPL PGA GAIN" value="12" />
<ctl name="HPR PGA GAIN" value="12" />
Replace it
<ctl name="HPL PGA GAIN" value="27" />
<ctl name="HPR PGA GAIN" value="27" />
Copy root/ODM/etc/audio/hi6402
Check permissions. -rw-r--r-- ( 644 ).
Reboot
Click to expand...
Click to collapse
no, that does not work in oreo
hi
luis taylor said:
I will update the thread
Click to expand...
Click to collapse
use the files for oreo and you will notice the difference, just moficar a file does not make a difference