As soon as I got my new XT1575, I OTA it to mm, root with supersu 2.6.2, install xposed and gravitybox[mm] , then I found alarm did not work.
Over sleep this morning, I have disabled battery optimization for the qualcom time service and my clock App, still not working!
And gravitybox[mm] make alarm icon disappear(before the wifi icon), disable gravitybox[mm], the icon return.
I also heard about time delay issue on Nexus devices running mm.
Mine didn't wake me up this morn, but it did yesterday. I did a re-install and it's working just now as I literally just tried it. Will it work tomorrow morn....
I've also been getting half of my calls. No, "do not disturb" is not on.
Related
I've set two alarms during the day ("wake up" and "finish to work") but they doesn't works.
Lock screen says, for example, "Friday 6:30pm" but at 6:40 nothing have ringed, and lock screen continues to show "Friday 6:30pm" even if the date and time is passed.
I have waited 30 minutes but nothing changed...
With Stock Froyo 2.2.2 Alarms worked well.
Now I'll risk to not wake up in time!!!!!
PS: I'm talking about STOCK 2.3.4 without root, CustomROM or others hacks.
emandt said:
I've set two alarms during the day ("wake up" and "finish to work") but they doesn't works.
Lock screen says, for example, "Friday 6:30pm" but at 6:40 nothing have ringed, and lock screen continues to show "Friday 6:30pm" even if the date and time is passed.
I have waited 30 minutes but nothing changed...
With Stock Froyo 2.2.2 Alarms worked well.
Now I'll risk to not wake up in time!!!!!
PS: I'm talking about STOCK 2.3.4 without root, CustomROM or others hacks.
Click to expand...
Click to collapse
It should work. Do you have an alarm sound picked, the correct day picked for the alarm, and check mark checked for the alarm?
Sent from my Atrix 4G with XDA Premium App
Sure.
For example we can take Today (friday): lock screen shows "Friday 7:50am" but now it's "Friday 10:16am"....That alarm is enabled from Monday to Friday at that time.
To avoid restart, I need to go to Alarm app, uncheck and check "Alarm active" checkbox, and then the Alarm will be active ONCE for next time.....
Mine are working they just went off this morning. 2.3.4 on ken's rom here.
My alarms are working fine after the Official 2.3.4 OTA
Didn't need to alter anything after it updated from Froyo.
Mine work also
This has also happened to me. When I try to change the volume, only the alarm volume is silent, no matter what sound I choose. After the alarm fails to sound, if I touch the volume, my phonr reboots?
Since lollipop was installed my phone virbates each time an updates is received/installed and its usually at a time I am in bed asleep and wakes me up - around 10.15 GMT.
Is there any way to change when updates are received or stop the vibration??
I've turned off notifications in the play settings but it still vibrates once its installed the update. I even use silent time and have 'enable vibration' turned off.
I'm getting more annoyed with lollipop.
Hi guys. I am running everything stock (not rooted etc.) and this morning my alarm did not go off and I got a missed alarm notification. I'm on the latest 6.0.1 build MHC19Q with the latest 4/2/16 security update. I checked multiple times by setting up the alarm again, and again another missed alarm notification with the screen off and the phone locked. I did have DND set to Alarms only, and I checked the alarm volume was fine. I powered off the phone and then back on, and now everything is fine. I hope this was a fluke! Luckily today was my day off, but now I'm VERY nervous about being late to work. I am using the stock clock version 4.3 app, and the phone was plugged in to charge.
Mine got diff issue. My alarm went off this morning but now I can't disable the alarm disturb mode.
It just fixed itself
Spoke too soon. Broken again.
mhajii210 said:
Hi guys. I am running everything stock (not rooted etc.) and this morning my alarm did not go off and I got a missed alarm notification. I'm on the latest 6.0.1 build MHC19Q with the latest 4/2/16 security update. I checked multiple times by setting up the alarm again, and again another missed alarm notification with the screen off and the phone locked. I did have DND set to Alarms only, and I checked the alarm volume was fine. I powered off the phone and then back on, and now everything is fine. I hope this was a fluke! Luckily today was my day off, but now I'm VERY nervous about being late to work. I am using the stock clock version 4.3 app, and the phone was plugged in to charge.
Click to expand...
Click to collapse
I had the same experience this morning. Stock Mate 9 (Australian edition?) with DND and alarms enabled. Alarm volume was up.
The alarm just did not go off (no vibrate, no noise, nothing). After unlocking the phone and checking alarm settings (same as yesterday) I got a notification that I had "missed an alarm". I've had alarms not go off in the past, but usually because an update had shut down the phone or something similar.
I did install 27 app updates yesterday... and uninstalled updates for Huawei Mobile Services which I was attempting to disable (trying to remove Huawei crap from my device). Perhaps that is related?
nacayoda said:
I had the same experience this morning. Stock Mate 9 (Australian edition?) with DND and alarms enabled. Alarm volume was up.
The alarm just did not go off (no vibrate, no noise, nothing). After unlocking the phone and checking alarm settings (same as yesterday) I got a notification that I had "missed an alarm". I've had alarms not go off in the past, but usually because an update had shut down the phone or something similar.
I did install 27 app updates yesterday... and uninstalled updates for Huawei Mobile Services which I was attempting to disable (trying to remove Huawei crap from my device). Perhaps that is related?
Click to expand...
Click to collapse
Alarm failed again this morning, even after updating all apps earlier in the week.
This time I've power-cycled and once back in, I got the "alarm missed" notice.
The alarm feature on this phone CANNOT be trusted.
I use SleepBot for my alarm. It's always worked just fine. As I go to bed I switch my profile to alarm only. Since the update it doesn't work as it should. I'll set the alarm the night before, wake up (after the alarm should have gone off) and unlock my phone and the alarm starts going off as if it should have been already. Just wondering if anyone else has these issues. I pull down notification bar and it says Alarms Only which it should.
try excluding the app from battery optimization.
Sent from my Nexus 5 using Tapatalk
Thank you.
I use Timely as my timer for my breaks at work. Also I use it as my alarm to wake up. At first I couldn't get the countdown timer to show in the notifications or update as it counted down.
After going into power managagement and turning off all power saving policies, I could see the timer countdown but only until the phone locks. Once locked it won't show the timer at all. The alarm I set is the same way it didn't go off or wake up phone, but as soon as I hit the power button to turn on the lock screen then alarm went off.
I've tried turning off smart power-save all together as well with no luck. I use smart lock so my phone shouldn't even lock when I'm at home but still didn't work.
Any other ideas or features to that I could try ? I've been using Timely for the past couple years on multiple android devices and never had this issue before. Any help would be appreciated.
I use Timely without any issue and it wakes me up every morning . What device are you using? What ROM? root? Xposed? Any battery saving app?
Yep.
Yes, I've been using Timely on every Android for the past 3 or 4 years. It miserably failed on the Axon 7. Every measure I took came to no avail. Uninstalled. Anyway, they stopped updating it on February 2015. Using "Alarm Clock Xtreme Free" currently.
Yurik46 said:
I use Timely as my timer for my breaks at work. Also I use it as my alarm to wake up. At first I couldn't get the countdown timer to show in the notifications or update as it counted down.
After going into power managagement and turning off all power saving policies, I could see the timer countdown but only until the phone locks. Once locked it won't show the timer at all. The alarm I set is the same way it didn't go off or wake up phone, but as soon as I hit the power button to turn on the lock screen then alarm went off.
I've tried turning off smart power-save all together as well with no luck. I use smart lock so my phone shouldn't even lock when I'm at home but still didn't work.
Any other ideas or features to that I could try ? I've been using Timely for the past couple years on multiple android devices and never had this issue before. Any help would be appreciated.
Click to expand...
Click to collapse
ohc1492 said:
Yes, I've been using Timely on every Android for the past 3 or 4 years. It miserably failed on the Axon 7. Every measure I took came to no avail. Uninstalled. Anyway, they stopped updating it on February 2015. Using "Alarm Clock Xtreme Free" currently.
Click to expand...
Click to collapse
I have the Axon 7, stock with b29 software, not rooted. I'm going to give Alarm Clock Xtreme a try tonight and see what happens.
I use Timely and it's randomly off by as much as 8 minutes. Usually it's 4 minutes late when the alarm goes off. And no I'm not sleeping through 4+ minutes of an alarm, my alarm is a song and I wake up right from the start of it. This is annoying since it forces me to set my alarm to earlier to make sure I'm not late, but then sometimes it does work on time so I've woken up a little early for nothing.
It's always been like this for me, before bootloader unlocking, before root, before Xposed or anything. Now I'm BL unlocked, rooted, with Xposed, etc, installed and I'm still having the exact same issue. B29 of course, prior versions had the same issue.
Alarm clock Xtreme did work for me last night with no issues. Woke the phone right up even with Smart power save enabled, and allow deep sleep in the power management features turned on. (That's how it was configured at install, and I didn't change anything)
I will miss some of the features of Timely, but I guess it's time to move on if they're no longer supporting it.