Related
Hey all,
I would like to know, what I might have done wrong in the rooting process. I used
This Tutorial hxxp://g2hacks.com/g2-hacks/how-to-root-g2-phone/
I made it to step #18 and was stopped by this error:
Code:
/data/local/tmp/root: data/local/tmp/busybox: not found
/data/local/tmp/root: data/local/tmp/busybox: not found
Unable to chmod /system/xbin/busybox: No such file or directory
/data/local/tmp/root: /system/xbin/busybox: not found
cp: not found
cp: not found
Ideas?
Thanks,
Danny
Here is a screenshot of what I pushed to the phone:
hxxp://i.imgur.com/No1id.jpg
You have a typo in your push command for busybox (you renamed it to root instead, which then got overwritten when you pushed root). Just push busybox again.
How do I back out and enter that push command again?
What would I type?
I'm a total novice.
On your comp, just type the command again:
Code:
adb push G2TempRoot/busybox /data/local/tmp/busybox
Then on your phone, in Terminal, just run the root command again:
Code:
/data/local/tmp/root
It should complete this time.
I made a mess. Check it:
hxxp://i.imgur.com/y3NRW.jpg
You are still in the adb shell (basically creates a terminal on your phone that you can interact with on your computer).
Type "exit" to leave the shell. This will return you to the regular command prompt (instead of the $). Then try the push command again.
So now the phone terminal gives me this:
Code:
/data/local/tmp/busybox: permission denied
Oh sorry, forgot you needed to set permissions on the file. Run this command again from your computer:
Code:
adb shell chmod 0755 /data/local/tmp/*
Then it should all work fine.
The errors are getting shorter
Now I get this:
Code:
mkdir failed for /system/xbin, File exists
This error doesn't matter (it's really more of a warning in this case) and is actually expected.
You should actually be rooted if you didn't see anything else.
AND I'M ROOTED... THANK YOU!
I'm new to Android from iOS. Any ROMS you would recommend?
Danny.B said:
AND I'M ROOTED... THANK YOU!
I'm new to Android from iOS. Any ROMS you would recommend?
Click to expand...
Click to collapse
Congrats! And there are a few threads about this that you can read through (just search for them). If you like HTC Sense (the interface HTC adds to a lot of their phones---basically lots nice visuals and extra polish to things), you can try Virtuous. If you like the stock look that the G2 comes with, there is a stock DEODEX rom out there. By de-odexing the rom, you can do things like customize the framework (e.g., customize the status bar icons/colors or add a battery percentage to it). Lots of people here (myself included), use CyanogenMod. It's close to stock but with lots of tweaks/extras (it's based on the Android Open Source Project or AOSP). It's also nice because it has frequent updates and constant development (they recently started pushing test builds that are based on Gingerbread---the new Android update only available on Nexus S).
Now that you are rooted though, it's easy enough to install Rom Manager and test them all out. Be sure to create a backup first as well.
ROM Manager installed. I'm backed up.
Thanks again for your help.
i cant flash the engineering hboot keep getting error md5sum : not found Verification of hboot-eng.img failed i re-download the files, re-extracted them to my SD card, and ran the flash_hboot script 3x still nothing plz help but im rooted and backed up
Did not want to create a new thread so I'm posting it here.
First off, I haven't tried rooting any of my phones previously so I'm obviously making a mistake somewhere.Hope someone here can help me out.
I installed visionary+ r14 but it just blacked out the screen with a heading.I've read elsewhere that it has all to do with the new firmware updates.My update for the DZ seems to be country a specific one and came out a couple of weeks back.
Anyway,
I tried this visionary method a few times but the phone just hung and I had to go to the homescreen and uninstall Visionary and reboot to get the phone to run smoothly again.
Then I read another way of rooting the thing and it took me here:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2
After a couple of tries I was able to push the files to the DZ but got stuck at this command:
adb shell chmod 0755 /data/local/tmp/*
The error it gives me is:
Unable to chmod /data/local/tmp/sqlite3: operation not permitted
Strange thing is, yesterday at the same point it gave me the same error but it was 'busybox' instead of sqlite3 and right before that it was something else.Which should mean that those earlier commands were run successfully by the terminal.
P.S. Debugging mode is on.Visionary is uninstalled. followed all the steps mentioned in the guide.
Okay.So I format the phone memory and I'm now able to move a few steps ahead.
But as soon as it seems that everything is going well, the terminal emulator refuses to open at this step:
"Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell "
waited a while and there is only a blank screen showing up.
mohitanfield said:
Okay.So I format the phone memory and I'm now able to move a few steps ahead.
But as soon as it seems that everything is going well, the terminal emulator refuses to open at this step:
"Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell "
waited a while and there is only a blank screen showing up.
Click to expand...
Click to collapse
It looks like you are trying to root a DZ with a firmeware version >= 1.72.
If yes to have to downgrade it to 1.34 first.
See either the instructions here: http://forum.xda-developers.com/showthread.php?t=905261 or the more comprehensive at http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_Z:_Rooting
But if your CID is other then the ones stated in the the first thread you need a goldcard to downgrade first, which is also described in the first thread.
have fun - Guhl
Thanks a lot for your reply and as is the case, my phones CID is HTC_38 which does not seem to be downgradable without a gold card.
I read the procedure and although its well explained, it will take a bit of time.
Will try it sometime soon hopefully, although I wish someone would just make a simple rooting app for the newer versions!
It took us month without sleep to create the existing rooting tools. So I do not see any simple rooting tools on the horizon
These are instructions for rooting Android devices that utilize the RK3066 chipset (Cortex A9 Dual Core, MALI Quad-Core GFX).
I have tested and verified that these instructions work for the UG007 Android-on-a-stick...they *should* work with any other devices that utilize the same USB chipset. I can almost guarantee this will work on the Imito MX1/2 as you can swap ROMS from this device.
(Basically, if you have the right ADB drivers, you should be good to go)
As per every other thread you read on this site - I TAKE NO RESPONSIBILITY FOR ANY DAMAGES YOU MAY CAUSE TO YOUR DEVICE.
This is a fairly risk-free mod, but you know...$hit happens.
Okay. Let's start.
THIS TUTORIAL ASSUMES YOU HAVE ADB AND KNOW HOW TO USE IT, and that you're in a Windows environment. There are numerous places on the web where you can find this info...and I ain't yo mamma.
1. Download all the files attached to this thread.
2. Attach your RK3066 device to your computer via it's microUSB port. You'll need to have it hooked to a display too.
3. Once booted, go to system settings. Under settings > developer options, enable USB Debugging. Under settings > USB, click "connect to computer" (This may vary depending on your ROM configuration. The point here is to have debugging enabled and your computer to recognize the stick in device manager as something other than USB storage)
4. Extract the right drivers for your system (x86/x64)
5. Go to device manager on your computer. Look for the new "unknown device". Right-click, pick "update driver software"., "browse my computer".
6. Browse to wherever you extracted the drivers in step 4. Click Next. Confirm that you want to install.
7. Open a command window in the directory where you have ADB. Type "adb devices". Still nothing, right?
8. Navigate to C:\users\MYUSERNAME\.android, where "MYUSERNAME" is your User Name. (Duh?)
9. Create a file called adb_usb.ini
10. Open it in a text editor. Add the following string and save (This tells ADB to look for our Vendor ID:
0x2207
11. You should now be able to type "adb devices" at CMD and see your device.
12. Now for the fun. Extract the stuff from "pushme" to the same directory as ADB.
13. Enter the following commands (note: The "$" and "#" symbols do not get keyed in):
Code:
adb push psneuter /data/local/tmp
adb shell
$ cd /data/local/tmp
$ chmod 777 psneuter
$ ./psneuter
14. Psneuter should run and close shell when done. Enter MOAR commands:
Code:
adb kill-server
adb devices
adb shell
15. Take a good look. Is there now a "#" sign? Good. You now have root access. You may continue. If not, then proceed to go yell at me in the comments. If yes, then proceed to enter the last batch of commands to make your newfound privileges permanent:
Code:
mount -o remount,rw -t rfs /dev/block/st19 /system
exit
adb push busybox /system/bin
adb push su /system/bin
adb install Superuser.apk
adb shell
# chmod 4755 /system/bin/busybox
# chmod 4755 /system/bin/su
# mount -o remount,ro -t rfs /dev/block/st19 /system
# exit
adb reboot
After a reboot, download a root app from Play Store to see if it worked! I find Root Checker is boffo for this sort of thing:
https://play.google.com/store/apps/...tcheck&feature=nav_result#?t=W251bGwsMSwyLDNd
THANKS/CREDITS:
Aaron Orquia @ Pocketables.com for the original "universal" root method.
AMJtech's tutorial where I found working ADB drivers and the adb_usb.ini bit to get it recognized.
The guy(s) who make Super1ClickRoot for putting all the necessary files in one easy-to-find spot.
Thanks for this tutorial.
A couple of notes:
Wow !! That's a lot of extra steps for you Windows users. Mac and Linux users start at step 11 (but if you are a Mac or Linux user, you already knew that. )
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Is step 13 necessary? adb remount works on mine. (not sure if I had to adb root first or not) but I can have a root shell via adb without psnueter.
If adb remount succeeds, skip step 14, and continue with the 3rd line of step 15.
Linuxslate said:
Thanks for this tutorial.
A couple of notes:
Wow !! That's a lot of extra steps for you Windows users. Mac and Linux users start at step 11 (but if you are a Mac or Linux user, you already knew that. )
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Is step 13 necessary? adb remount works on mine. (not sure if I had to adb root first or not) but I can have a root shell via adb without psnueter.
If adb remount succeeds, skip step 14, and continue with the 3rd line of step 15.
Click to expand...
Click to collapse
Thanks for the input! Yes, yes, I know windoze makes more work. It's also pretty widespread for folks.
For step 13 - I think it depends on the device. It would be nice for others to weigh in and let me know if it's needed. If not, I can totally remove it.
Also, in the other ROM thread, I made, it's even easier to root - you just grab one of the pre-rooted ROMS and drop it in SD card...the system does the rest. Mind you, this is for the UG007.
Links UG007
If you Bluetooth connection is not working properly, try to install this custom ROM: http://blog.geekbuying.com/index.php/category/android-tv-stick-tv-box/ug007/
How to install CWM-based Recovery: http://androtab.info/clockworkmod/rockchip/
Both worked for me. I was able to connect my BT Keyboard/Mouse Pad combo
./psneuter
Failed to set prot mask (Inappropriate ioctl for device) ??
nice tutorial.. while finding the best way to work my ug007 i stumbled upon this thread via armtvtech.com
currently i only knew this tutorial to root the device, but looking at yours ill give it a try first.
digitalhigh said:
Also, in the other ROM thread, I made, it's even easier to root - you just grab one of the pre-rooted ROMS and drop it in SD card...the system does the rest. Mind you, this is for the UG007.
Click to expand...
Click to collapse
you cant install custom roms without flashmode, cant do flashmode without opening device.. or did i get it wrong!? talking about the ug007
actually you can install a custom rom once you are rooted without opening the device, here
Linuxslate said:
(Hint: It may not be /just/ the udev stuff.)
Click to expand...
Click to collapse
ehm.. im still preparing to root, i guess you hint at the android sdk?
if not ill holla back at you and complain why you didnt write it out in first place
but very good to know that i skip alot by "almost" only installing ubuntu to a vm
I may be missing something, but I couldn't get this to work on my UG007
psneuter didn't work for me, gave me an error about 'invalid ioctl' or something. But the strangest thing is that "adb shell" already shows the # in the prompt.
To confirm my suspitions, I also typed "adb root", which returned "adb is already running as root".
So I proceeded with the rest of the instructions. No errors appeared, installed Superuser and I can see su and busybox in system/bin
But when I download root checker it says it wasn't properly rooted. installing terminal and type "su" says permission denied - and that's it.
Am I missing something? I'm new to this rooting thing, so please don't be angry with my noobish questions
I managed to do it - but *not* by following this tutorial.
I used this: armtvtech.com/armtvtechforum/viewtopic.php?t=28 (Cant post links yet, sorry!)
Only ran the "TPSarky-VonDroid-Root" bat, and presto! I had root on UG007.
I even fixed the changing MAC address problem with wlan.ko from armtvtech.com/armtvtechforum/viewtopic.php?f=69&t=632&start=10 (link on page 2). I just copied it to /data/local/tmp, set permissions as rwr--r-- and then used root explorer to copy it to /system/lib/modules - now I have wifi signal every time I boot the device, and don't need to mess with my router config every time
I also manage to get xbox360 wired controller working. xpad.ko on /data/local/tmp and then insmod /data/local/tmp/xpad.ko - just connect the joystick after that, and it will be recognized. Only problem is, after a reboot I have to insmod again.
I tried doing the same thing I did with wlan.ko, but nothing happens - system won't load it on boot. Am I missing something here?
The psneuter is broken
I'm on Linux, running a RK3066, and psneuter gives "Failed to set prot mask (Inappropriate ioctl for device)". Running Ice Cream Sandwich 4.1.1, kernel 3.0.8+, build RK30_anpei10w1am-r4.0.57.20121207, A10-2 cpu.
SLotman said:
I may be missing something, but I couldn't get this to work on my UG007
psneuter didn't work for me, gave me an error about 'invalid ioctl' or something. But the strangest thing is that "adb shell" already shows the # in the prompt.
To confirm my suspitions, I also typed "adb root", which returned "adb is already running as root".
So I proceeded with the rest of the instructions. No errors appeared, installed Superuser and I can see su and busybox in system/bin
But when I download root checker it says it wasn't properly rooted. installing terminal and type "su" says permission denied - and that's it.
Am I missing something? I'm new to this rooting thing, so please don't be angry with my noobish questions
Click to expand...
Click to collapse
Try renaming old "su".
Check permissions on the su and busybox you installed.
MK808, MK809 [model T002], and the MK802 III anyone?
Hi,
Thanks OP for this information.
I have a Samsung S3 [my first android device] which I rooted with no problem, but am a total noob when it comes to these android sticks.
One can say they are very similar, so I wont be completely in the dark. OK, now that we got that out of the way...
Can anyone please confirm whether they have used this with the MK808, MK809 [model T002], and the MK802 III,
I have ordered these from 1 from amazon and 2 from ebay and am expecting delivery shortly, therefore I just want to make sure before I go bricking them one by one...
I notice that they all have RK3066 Cortex A9 chips but are manufactured by different companies. The ones I see on eBay, although they all bear the same code MK8xx, they all look very different! I presume the MK8xx code is a universal model?? just like 80486 was to the PC? given the case does this method work universally?
I intend to set them up with XBMC media centres and to use with a Xbox controller. Any advice on the best way for achieving this would be nice too.
Thanks
:good:
Linuxslate said:
Thanks for this tutorial.
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Click to expand...
Click to collapse
Linuxslate, I have an MK808 that shows up in lsusb as 2207:300a when I put it in "flash mode" but it never shows up via "adb devices".
I got mine the other day and it turned out to be rooted already?
I decided to install SuperSu and that's how I found out it was rooted.
Immediately, installed Busybox, System Tuner Pro and Titanium Backup.
Rob
Rob sent this from his SPH-D710 via Tapatalk
So would this possibly work on this - http://www.zoostorm.com/Products/357-zoostorm-sl8-3305-1030-tablet-pc.aspx
States it's a Rockchip RK3066 Cortex A9 Dual Core 1.5GHz, running 4.1.1 Jelly Bean, quite interested in getting one & root would be a bonus.
psneuter broken
Hello,
the psneuter attached to the first post doesn't do anything to my ug007. I have the same error others have posted here and haven't gotten a reply about.
To unlock, I used the script that's mentioned in a post above, TPSarky-VonDroid-Root. If you google that, you'll find a download link amongst the results.
Thank u very much...:thumbup:
................................................................................................
Linuxslate said:
Try renaming old "su".
Check permissions on the su and busybox you installed.
Click to expand...
Click to collapse
Can you elaborate a little bit what you mean by renaming "su"?
I'm having the same issue..
Both su and busybox are having the same permission -rwsr-xr-x.
Sent from my Transformer Prime TF201 using XDA Premium HD app
I configured one of these at work. Upon using the terminal app and typing in su I got the # sign. They seem to come from the factory rooted already.
Sent from my Nexus 4 using xda app-developers app
ageerer84 said:
I configured one of these at work. Upon using the terminal app and typing in su I got the # sign. They seem to come from the factory rooted already.
Click to expand...
Click to collapse
Not exactly: this particular su can be used only from adb console, or at least that how it was on my tablet. So you need to replace it with a Superuser apk's su to get all features of rooted android. You can get one e.g. from FDroid
--
blog
Not sure what u mean by on your tablet. Android devices don't typically come rooted but I was surprised to have root access via terminal emulator on this stick PC. I just took it out of the box and definitely didn't have to go through the adb interface on a computer to flash superuser or what have you. Is this just me or is this a typical experience with this particular device?
Sent from my Nexus 4 using xda app-developers app
I have successfully recovered the Kindle Fire HDX 8.9 from the soft brick which occurs from removing or altering system files.
THIS IS SPECIFICALLY FOR THOSE THAT REMOVED (PERSONALLY OR VIA SCRIPT) SOMETHING FROM THE SYSTEM PARTITION OR MESSED WITH THE BUILD.PROP. This guide focuses on a fix for ONE specific issue, so read it, determine what your issue is & then make the necesarry changes, or ask what changes need to be made. I have a bit of time over the next few days before going back to my job as a mechanical engineer, which means come the second week of January, I will be EXTREMELY busy.
I will be available via hangouts & IRC to guide you through recovery of your device when possible. The IRC channel will be #HDX & I will occasionally check in.
To recover your device, you must be rooted. Rooting may be possible while in boot loop, but it is VERY difficult & everything is about timing.
Firstly, you need to have everything from the root post by jcase to get started. You will also need adb & the Android SDK installed. Since it seems most of you are on Windows, I have forgone my linux distro & focused on finding a Windows solution, though this should work on Linux or Mac as well.
My particular brick was on purpose. It was based on the softbrick that can occur when using the root/Play store script by Ptiwee that is found here: http://forum.xda-developers.com/showpost.php?p=48739126&postcount=1
In this instance, if any part of the odex removal/replacement fails, you will be stuck in a bootloop. If you factory reset after being stuck, you complicate issues, because init is not able to complete & you then have an empty /data partition. This means that the fix differs depending on whether or not you did indeed perform a factory reset from the HDX recovery menu.
If you did perform a reset, then you need to do the following:
Download the HDX 8.9 root & follow jcase instructions from here: http://forum.xda-developers.com/showthread.php?t=2542456.
It will fail because the /data/local/tmp directory does not exist yet.
After completing these steps & failing, open cmd prompt & issue "adb shell" command.
Issue "su" command.
In the SU shell, issue the following set of commands:
mkdir /data
mkdir /data/local
mkdir /data/local/tmp
chmod 755 /data
chmod 755 /data/local
chmod 755 /data/local/tmp
adb shell
su
mount -o rw,remount /system
I then ran through the exploit from jcase again.
Then I opened a cmd window & did the following
adb root
adb shell
su
mount -o remount /system
This is where things get specific for my issue, which was the new services.odex that the ptiwee script installed.
for this issue, I opend a second terminal window & did the following:
adb push services.odex /data/local/tmp/services.odex
adb push DownloadProvider.odex /data/local/tmp/DownloadProvider.odex
adb push DownloadProviderUi.odex /data/local/tmp/DownloadProviderUi.odex
Now go back to your first cmd shell window & do the following (you may need to unplug the usb cable & quickly reinsert it):
adb shell
su
mount -o remount /system
exit
chmod 755 /data/local/tmp/services.odex
chmod 755 /data/local/tmp/DownloadProvider.odex
chmod 755 /data/local/tmp/DownloadProviderUi.odex
su
rm /system/framework/services.odex
cp /data/local/tmp/services.odex /system/framework/services.odex
chmod 755 /system/framework/services.odex
(for me on this issue, which was confirmed via logcat in Linux using Qtadb, the device screeen fully booted at this point, by itself)
However, you may need to also do this:
cp /data/local/tmp/DownloadProvider.odex /system/app/DownloadProvider.odex
cp /data/local/tmp/DownloadProviderUi.odex /system/app/DownloadProviderUi.odex
This would also apply to a modified build.prop bootloop. You would of course change the file you are move & chmod to build.prop & adjust the target directory accordingly.
My device is 100% working again & using this info, if you are stuck in a bootloop from changing, removing or whatever files, you should be able to similarly recover using a modified version of the data above.
Again, you really need to know what you were doing that caused the issue in the first place, but if you have a good idea what did it, then chances are you can recover.
Now hit thanks & let me know how you goofed up your device & we'll see if we can't fix it.S
Thanks for this. I tried this method to get google play working, which was no doubt something I did wrong in the process as others had success there (could be 8.9 vs 7 but I was willing to try). It was stuck with the orange Fire logo lit, but luckily ADB still recognized it, though windows wouldn't detect it as a USB drive. I had an issue when replacing services.odex with another, and this caused mine to immediately crash and never fully boot right when I changed the file. It was 0 bytes when viewed from the shell.
I was really rattled last night trying to figure out how to get the files back in place, as I could not get su to work from the shell, so permission denied on chmod and any attempt to remount /system as rw. Thankfully, I had the foresight to get the files pulled to my PC before I did the factory reset (I backed up all amazon files I was changing). Your instructions got me going again, and I finally got su to work and put those files back in place. It still wouldn't boot, so I did another factory reset (desperation) and re-rooted it.
Unfortunately, where it was once to the point with the Fire lit up, it vanishes when it would normally do that and is now stuck on a blank screen, though still recognized by adb. I can even get in the shell, but am at a loss as to what I might do next to get this thing booting. The only files I go around to modifying were DownloadProvider/ui apk and odex, along with services.odex. I'd very much appreciate any advice at this point.
I feel hopeful just to have su and still have access to adb with the files back in place, just confused on how it could be failing at this point. I'm obviously a novice and shouldn't have gone poking around too much until more experienced people had figured the 8.9 out, but I was too excited to get authentication from the Play Store working on this thing and willing to take the risk. If I get it working again, I'll be glad I've done all this, just because of how much I've learned from the process.
Edit: Yesss! chmod 755 on /system/framework did the trick. it was not executable Thank you so much for your effort here.
Followed the guide, Kindle is back again at least works...
But when I try to open the camera app... It never opens and just stays there until it closes... Any ideas?
(Will find more stuff and post just in case)
Poesini said:
Followed the guide, Kindle is back again at least works...
But when I try to open the camera app... It never opens and just stays there until it closes... Any ideas?
(Will find more stuff and post just in case)
Click to expand...
Click to collapse
@Poesini
Once you have it working, to the point of booting into the OS, grab the update.bin from Amazon (update-kindle-14.3.1.0_user_310079820.bin) here:
https://s3.amazonaws.com/kindle-fire-updates/update-kindle-14.3.1.0_user_310079820.bin
Once downloaded, grab a root level file explorer. I use the paid Root Explorer because it has built in root acess, a text editor & a ro/rw toggle button, but others should surely work. Make sure that the /System partition/directory is mounted as RW, then open the file build.prop & edit all the entries that say "310079820" to be"310079819".
You will find them in the build.prop as follows:
ro.build.version.incremental=14.3.1.0_user_310079820
ro.build.version.number=310079820
ro.build.description=apollo-user 4.2.2 JDQ39 14.3.1.0_user_310079820 release-keys
ro.build.fingerprint=Amazon/apollo/apollo:4.2.2/JDQ39/14.3.1.0_user_310079820:user/release-keys
Do not add the parenthesis, just change the last three number to 819 & then be sure to save the file. Open it again to ensure the edits were made, so you are certain that the device directory was indeed RW. Once that is done, make sure the permissions are set to 0644, or rw-r--r-- & check the ownership to make certain the owner & group are both set to "Root". If you do not work on the "live" build.prop, then copy the edited build.prop to the root folder (/) first, then check permissions or change them using adb chown & chmod commands as required.
Again, I suggest copying the file to your PC as a backup, though you will have a copy in the downloaded update.bin (which is just a zip archive). I also suggest using a root explorer with a built in text editor, like Root Explorer.
Once this is done & you are certain the build.prop has been edited, copy the update.bin to the storage (sdcard) root & reboot the device.
Once the device has reboot, go into settings, device, system updates & select the install update button. Follow the directions & the device will reboot again & install the firmware. Any mods made to the System directory will be gone & everything should work again.
chratcliff said:
Thanks for this. I tried this method to get google play working, which was no doubt something I did wrong in the process as others had success there (could be 8.9 vs 7 but I was willing to try). It was stuck with the orange Fire logo lit, but luckily ADB still recognized it, though windows wouldn't detect it as a USB drive. I had an issue when replacing services.odex with another, and this caused mine to immediately crash and never fully boot right when I changed the file. It was 0 bytes when viewed from the shell.
I was really rattled last night trying to figure out how to get the files back in place, as I could not get su to work from the shell, so permission denied on chmod and any attempt to remount /system as rw. Thankfully, I had the foresight to get the files pulled to my PC before I did the factory reset (I backed up all amazon files I was changing). Your instructions got me going again, and I finally got su to work and put those files back in place. It still wouldn't boot, so I did another factory reset (desperation) and re-rooted it.
Unfortunately, where it was once to the point with the Fire lit up, it vanishes when it would normally do that and is now stuck on a blank screen, though still recognized by adb. I can even get in the shell, but am at a loss as to what I might do next to get this thing booting. The only files I go around to modifying were DownloadProvider/ui apk and odex, along with services.odex. I'd very much appreciate any advice at this point.
I feel hopeful just to have su and still have access to adb with the files back in place, just confused on how it could be failing at this point. I'm obviously a novice and shouldn't have gone poking around too much until more experienced people had figured the 8.9 out, but I was too excited to get authentication from the Play Store working on this thing and willing to take the risk. If I get it working again, I'll be glad I've done all this, just because of how much I've learned from the process.
Edit: Yesss! chmod 755 on /system/framework did the trick. it was not executable Thank you so much for your effort here.
Click to expand...
Click to collapse
Glad to get you pointed in the right direction. This is what XDA used to be. How I learned anything at all. I am a mechanical engineer, not a software or hardware guy. Just a guy that will not give up on something broken.
It's all about taking little queues from here & there & then trying to assemble parts of different things into accomplishing what it is you are working on. All of this was based on things I tried or read in the past, working to root devices like the Xoom, etc... After reading about the exploit we had applied (what it is & how it works, some of which was beyond me), I was able to surmise that the exploit we used was still there as was the ability to access root permission, but that the tablet had "forgotten" we had root access rights because of the wipe. We just had to use adb to give it the files "memory" of our access to root & the permission to use them, in essence, tell it what we wanted. Working with a Linux or Android device is like working with the smartest person in the world that is also a 5 year old. It can do anything, yet hasn't the common sense to get it done. We need to provide that for it's brilliance to become useful.
As mentioned above, I highly recommend modding the build.prop & re-flashing the update.bin to have a clean slate.
GSLEON3 said:
Working with a Linux or Android device is like working with the smartest person in the world that is also a 5 year old. It can do anything, yet hasn't the common sense to get it done.
Click to expand...
Click to collapse
This is the damned truth never better spoken lol
Sent from my SPH-L900 using xda app-developers app
GSLEON3 said:
Ahhhhh.... XDA! The thrill of it all, you desperately want something now, you're a smart guy, you can do it & nothing beats that feeling of your sphincter tightening up, your heart racing, as you wait for that device to reboot....wait.....maybe another minute.....okay....crap... what do I do now? I love that feeling! I mean YOLO. Livin' dangerous dog, lol... Okay, I "bricked my device on PURPOSE, since there is a Play Store script in a ceertain tool that seems to be broken, or is missing information from the instructions, such as safestrap, or something.... That part I haven't figured out. I asked the creator to take a look at what he did & in the mean time, this should get you fixed up. It is actually much easier is you were not panicked to the point of factory resetting, but either way, the info below will get you sorted out.
I have successfully recovered the Kindle Fire HDX 8.9 from the soft brick which occurs from removing or altering system files.
THIS IS SPECIFICALLY FOR THOSE THAT REMOVED (PERSONALLY OR VIA SCRIPT) SOMETHING FROM THE SYSTEM PARTITION OR MESSED WITH THE BUILD.PROP. This guide focuses on a fix for ONE specific issue, so read it, determine what your issue is & then make the necesarry changes, or ask what changes need to be made. I have a bit of time over the next few days before going back to my job as a mechanical engineer, which means come the second week of January, I will be EXTREMELY busy.
I will be available via hangouts & IRC to guide you through recovery of your device when possible. The IRC channel will be #HDX & I will occasionally check in.
To recover your device, you must be rooted. Rooting may be possible while in boot loop, but it is VERY difficult & everything is about timing.
Firstly, you need to have everything from the root post by jcase to get started. You will also need adb & the Android SDK installed. Since it seems most of you are on Windows, I have forgone my linux distro & focused on finding a Windows solution, though this should work on Linux or Mac as well.
My particular brick was on purpose. It was based on the softbrick that can occur when using the root/Play store script by Ptiwee that is found here: http://forum.xda-developers.com/showpost.php?p=48739126&postcount=1
In this instance, if any part of the odex removal/replacement fails, you will be stuck in a bootloop. If you factory reset after being stuck, you complicate issues, because init is not able to complete & you then have an empty /data partition. This means that the fix differs depending on whether or not you did indeed perform a factory reset from the HDX recovery menu.
If you did perform a reset, then you need to do the following:
Download the HDX 8.9 root & follow jcase instructions from here: http://forum.xda-developers.com/showthread.php?t=2542456.
It will fail because the /data/local/tmp directory does not exist yet.
After completing these steps & failing, open cmd prompt & issue "adb shell" command.
Issue "su" command.
In the SU shell, issue the following set of commands:
mkdir /data
mkdir /data/local
mkdir /data/local/tmp
chmod 755 /data
chmod 755 /data/local
chmod 755 /data/local/tmp
adb shell
su
mount -o rw,remount /system
I then ran through the exploit from jcase again.
Then I opened a cmd window & did the following
adb root
adb shell
su
mount -o remount /system
This is where things get specific for my issue, which was the new services.odex that the ptiwee script installed.
for this issue, I opend a second terminal window & did the following:
adb push services.odex /data/local/tmp/services.odex
adb push DownloadProvider.odex /data/local/tmp/DownloadProvider.odex
adb push DownloadProviderUi.odex /data/local/tmp/DownloadProviderUi.odex
Now go back to your first cmd shell window & do the following (you may need to unplug the usb cable & quickly reinsert it):
adb shell
su
mount -o remount /system
exit
chmod 755 /data/local/tmp/services.odex
chmod 755 /data/local/tmp/DownloadProvider.odex
chmod 755 /data/local/tmp/DownloadProviderUi.odex
su
rm /system/framework/services.odex
cp /data/local/tmp/services.odex /system/framework/services.odex
chmod 755 /system/framework/services.odex
(for me on this issue, which was confirmed via logcat in Linux using Qtadb, the device screeen fully booted at this point, by itself)
However, you may need to also do this:
cp /data/local/tmp/DownloadProvider.odex /system/app/DownloadProvider.odex
cp /data/local/tmp/DownloadProviderUi.odex /system/app/DownloadProviderUi.odex
This would also apply to a modified build.prop bootloop. You would of course change the file you are move & chmod to build.prop & adjust the target directory accordingly.
My device is 100% working again & using this info, if you are stuck in a bootloop from changing, removing or whatever files, you should be able to similarly recover using a modified version of the data above.
Again, you really need to know what you were doing that caused the issue in the first place, but if you have a good idea what did it, then chances are you can recover.
Now hit thanks & let me know how you goofed up your device & we'll see if we can't fix it.
Click to expand...
Click to collapse
What should I do if I connect my kindle to PC without any reaction? I had done factory reset before. ADB cannot be recognized, nor do any special USB stuff. I thought mine got bricked for build.pro and I can just turn it to original recovey. Can you help me, please?
TOM XIE said:
What should I do if I connect my kindle to PC without any reaction? I had done factory reset before. ADB cannot be recognized, nor do any special USB stuff. I thought mine got bricked for build.pro and I can just turn it to original recovey. Can you help me, please?
Click to expand...
Click to collapse
Need more info & less quote. lol...
Does it turn on at all? What is on the screen? Is it lit, but looks like it's off? What EXACTLY did you change in the build.prop? Even a brick is usually recognized as SOMETHING when the device is attached (at least in Windows), so if nothing is being recognized, you may have an issue with PATH or just a finicky sdk installation. Are you on Windows or Linux?
GSLEON3 said:
Need more info & less quote. lol...
Does it turn on at all? What is on the screen? Is it lit, but looks like it's off? What EXACTLY did you change in the build.prop? Even a brick is usually recognized as SOMETHING when the device is attached (at least in Windows), so if nothing is being recognized, you may have an issue with PATH or just a finicky sdk installation. Are you on Windows or Linux?
Click to expand...
Click to collapse
Thank you for helping me! I followed this http://forum.xda-developers.com/showthread.php?t=2582773 and replaced buil.prop offered. I can turn it on by holding power button for several seconds and it showed the gray "kindle fire" logo for a few seconds,then turn off again.By the way,I am using win7 and I have no idea about PATH and sdk.
Tried, and failed... Since my kindle fire stopped at the sliver kindle fire screen and it reboots again and again, I can't even get the access to adb...
I think maybe I need to request a replacement from Amazon...Or someone could give me a usable System image and fastboot.exe.....
EDIT: Weird....After 10 minute's rebooting, my kindle suddenly works....Everything seems to be fine....
TOM XIE said:
Thank you for helping me! I followed this http://forum.xda-developers.com/showthread.php?t=2582773 and replaced buil.prop offered. I can turn it on by holding power button for several seconds and it showed the gray "kindle fire" logo for a few seconds,then turn off again.By the way,I am using win7 and I have no idea about PATH and sdk.
Click to expand...
Click to collapse
@TOM XIE If you used that build.prop provided in that thread, then you replaces yours with one meant for the 7" HDX. You need to download the update.bin from Amazon & extract it (it is just an archive zip). You will then have wht you need.
scx110a said:
Tried, and failed... Since my kindle fire stopped at the sliver kindle fire screen and it reboots again and again, I can't even get the access to adb...
I think maybe I need to request a replacement from Amazon...Or someone could give me a usable System image and fastboot.exe.....
EDIT: Weird....After 10 minute's rebooting, my kindle suddenly works....Everything seems to be fine....
Click to expand...
Click to collapse
Not weird at all. This will occasionally happen until the corrected changes make it into the Dalvik. Tense stuff I know, but jcase finding the device vulnerable to the master key #2 is a blessing in disguise. Hard for simple errors to really mess things up. Not saying go at it, but simple changes of most things (do not mess with bin, xbin or any of the basic systemui framewor-res) will not be a total loss.
Now I just need to take the time to decompile tiwee's Play Store mod & see if I can't find a typo or something amiss.
GSLEON3 said:
@TOM XIE If you used that build.prop provided in that thread, then you replaces yours with one meant for the 7" HDX. You need to download the update.bin from Amazon & extract it (it is just an archive zip). You will then have wht you need.
Click to expand...
Click to collapse
I have downloaded update.bin from Amazon. The most difficult part is that my kindle cannot be recognized as anything.
TOM XIE said:
I have downloaded update.bin from Amazon. The most difficult part is that my kindle cannot be recognized as anything.
Click to expand...
Click to collapse
Are you running Windows or Linux?
Also, do you have the Android SDK & the JDK installed.
Both of these are important steps. Also, was the device rooted & if you plug it into the USB port in a windows machine, do you see anything happen in Device Manager? It should fail to install the device (MTP) but if you have everything installed, you should try running it in a terminal directly in the sdk tools directory.
Also, have you updated your environmental or pam.environmental file as well in your bash file?
EDIT: I just went out on a limb again & I pushed the HDX7 build.prop to my device & rebooted. I was able to cp the repaired build.prop, so tell me everything you have done (what you tried & changed, modded or installed into system or root on the HDX) & check the above tips.
GSLEON3 said:
Not weird at all. This will occasionally happen until the corrected changes make it into the Dalvik. Tense stuff I know, but jcase finding the device vulnerable to the master key #2 is a blessing in disguise. Hard for simple errors to really mess things up. Not saying go at it, but simple changes of most things (do not mess with bin, xbin or any of the basic systemui framewor-res) will not be a total loss.
Now I just need to take the time to decompile tiwee's Play Store mod & see if I can't find a typo or something amiss.
Click to expand...
Click to collapse
Hope you good luck.... That's really a complex thing since Amazon did so many changes to the DownloadProvider....
May ask you a question? plz
GSLEON3 said:
Are you running Windows or Linux?
Also, do you have the Android SDK & the JDK installed.
Both of these are important steps. Also, was the device rooted & if you plug it into the USB port in a windows machine, do you see anything happen in Device Manager? It should fail to install the device (MTP) but if you have everything installed, you should try running it in a terminal directly in the sdk tools directory.
Also, have you updated your environmental or pam.environmental file as well in your bash file?
EDIT: I just went out on a limb again & I pushed the HDX7 build.prop to my device & rebooted. I was able to cp the repaired build.prop, so tell me everything you have done (what you tried & changed, modded or installed into system or root on the HDX) & check the above tips.
Click to expand...
Click to collapse
I have still brick my device my device is hdx7. My latop os window7.
Connect my kindle to laptop's usb port. My laptop is.shown qhsusb_bulk so i follow your step but
Not booting my device. Now i know my device 's system erase. Second step i connect nomal cable but shown unknown
MTP device. Plz help me. Do you know adb work? On my win7 laptop?
Or another method? Plz please help.me sorry for my english
cjdfyd2 said:
I have still brick my device my device is hdx7. My latop os window7.
Connect my kindle to laptop's usb port. My laptop is.shown qhsusb_bulk so i follow your step but
Not booting my device. Now i know my device 's system erase. Second step i connect nomal cable but shown unknown
MTP device. Plz help me. Do you know adb work? On my win7 laptop?
Or another method? Plz please help.me sorry for my english
Click to expand...
Click to collapse
Need to leave device alone for an hour or more while unpluged, no PC, no power.
After that hour, then press & hold the power button for 3 minutes, or until device starts. If it does not start into bootloap, then release the power button & let sit for a few minutes. Try to turn it on again.
Also, what did you do to the device? What did you mod, or change or add that caused the issue?
As for Windows, I have found that for adb to work on the HDX, you need to have the SDK installed & that sometimes it will not recognize the device from anywhere but the sdk folder.
Also, I had some issues getting some of the commands to work occasionally in Windows, which is why I choose to do these things in Linux.
GSLEON3 said:
@Poesini
Once you have it working, to the point of booting into the OS, grab the update.bin from Amazon (update-kindle-14.3.1.0_user_310079820.bin) here:
(still can't post links)
Once downloaded, grab a root level file explorer. I use the paid Root Explorer because it has built in root acess, a text editor & a ro/rw toggle button, but others should surely work. Make sure that the /System partition/directory is mounted as RW, then open the file build.prop & edit all the entries that say "310079820" to be"310079819".
You will find them in the build.prop as follows:
ro.build.version.incremental=14.3.1.0_user_310079820
ro.build.version.number=310079820
ro.build.description=apollo-user 4.2.2 JDQ39 14.3.1.0_user_310079820 release-keys
ro.build.fingerprint=Amazon/apollo/apollo:4.2.2/JDQ39/14.3.1.0_user_310079820:user/release-keys
Do not add the parenthesis, just change the last three number to 819 & then be sure to save the file. Open it again to ensure the edits were made, so you are certain that the device directory was indeed RW.
Again, I suggest copying the file to your PC as a backup, though you will have a copy in the downloaded update.bin (which is just a zip archive). I also suggest using a root explorer with a built in text editor, like Root Explorer.
Once this is done & you are certain the build.prop has been edited, copy the update.bin to the storage (sdcard) root & reboot the device.
Once the device has reboot, go into settings, device, system updates & select the install update button. Follow the directions & the device will reboot again & install the firmware. Any mods made to the System directory will be gone & everything should work again.
Click to expand...
Click to collapse
Tried using this method after the installation of gapps failed due to system directory being full (1gb)... I already gave up on this device until I saw this... Many Thanks! :highfive:
Thanks your answer and happy new year, i was wonder if could you help me?
GSLEON3 said:
Need to leave device alone for an hour or more while unpluged, no PC, no power.
After that hour, then press & hold the power button for 3 minutes, or until device starts. If it does not start into bootloap, then release the power button & let sit for a few minutes. Try to turn it on again.
Also, what did you do to the device? What did you mod, or change or add that caused the issue?
As for Windows, I have found that for adb to work on the HDX, you need to have the SDK installed & that sometimes it will not recognize the device from anywhere but the sdk folder.
Also, I had some issues getting some of the commands to work occasionally in Windows, which is why I choose to do these things in Linux.
Click to expand...
Click to collapse
my device is kindle 7", i had followed step Cpasjuste's http://forum.xda-developers.com/showthread.php?t=2577826 and i delete these files
"/system/app/amazonmp3_4010410.apk" -> amazon mp3 ..
"/system/app/Email_310006810.apk" -> email app, replaced by gmail which is currently broken !
"/system/app/Photos_7016610.apk" -> photos app
"/system/app/OfficeSuiteViewer.apk" -> office ..
"/system/app/S2Service.apk" -> something to do with cellular i think
"/system/app/Launcher-release-signed_81224610.apk" -> amazon launcher
"/system/app/AmazonWebViewLib_1109110.apk" -> slik browser
"/system/app/com.amazon.cloud9-platform_38038110.apk" -> amazon cloud/sync
and flashing he's gapps file. and then my device is bricked. it's shown grey kindle fire logo only, so i reboot many times but still shown kindle fire logo only.
So i install ubuntu my laptop, and follow your step jcase's file download on my computer.
but i don't know how next step? how open "su" file? by sdk? work on window os? or linux os? sorry for many question plz help me..and happy new year
Hello,
My kindle is bootlooping on the grey kindle and orange fire logo. This is a HDX 7.
I rooted, went a bit crazy with uninstalling kindle bloatware, screen went black, thought factory reset would do the trick, end up in bootloop.
My computer recognizes the kindle so what should I do?
Before we start this you will need a few files, you need jcases pie root, the android sdk and the drivers installed for your device.
I've included his package from his thread.
Now I installed SuperSU first before even starting the root process because root isn't needed to just instal the app itself, it will just close once it's open.
Make sure you enable USB debugging and unknown sources before continuing. Extract the two files pie.jar and root.sh to the folder "platform-tools"
This folder should be on your desktop, at least thats where I put adt-bundle folder at. Once placed in to the folder hold shift and right and select "open command window here" and your command prompt should pop up. Connect your device and make sure you're powered on. Type "adb devices" and you should get an access message on your phone just give your phone the authorization. Type "adb devices" once more to make sure your device is listed.
Now to Semi-root the phone
These are to be entered one by one, just copy and paste them one by one.
adb push pie.jar /data/local/atvc
adb push root.sh /data/local/atvc
adb shell chmod 755 /data/local/atvc/root.sh
adb shell /data/local/atvc/root.sh
Your phone itself should disconnect from your computer (at least thats what mine did) and reconnect.
So far I haven't figured out how to work exposed but busy box and adblock plus and other simple root apps work just fine.
Remember this is a tethered root so if you shut off your phone you will have to redo the process every single time you do a hard reboot. Soft reboots work without problems, so unless your battery dies you really have no reason to restart your phone.
I believe @jcase is the developer of the root method and he has instructions for his method on his thread. You are stealing and violating XDA policies! Please report to any mod
MOTO X
I imagine he thought he was being helpful...but yeah, OP should take the link down, and instead, post a link to @jcase 's thread....unless he has given you explicit permission to re-post his file.
As far as using Xposed, OP, you need to download the latest framework from here.
Next, open the app and select Framework. To install, click the very first option which is "Install/Update". (NOTE: Classical installation mode will not work with this type of root!)
After installing the framework it will prompt you for a reboot. Select cancel and then on the same screen as the Install/Update button select the second to last option labeled "Soft Reboot". This is the only kind of reboot you can do to preserve root!
Please delete my binaries, as i update them from time to time, and the ones here would not be updated.
http://forum.xda-developers.com/moto-x/orig-development/root-4-4-x-pie-motorola-devices-t2771623 is the supported guide, with up to date binaries
super65man said:
Before we start this you will need a few files, you need jcases pie root, the android sdk and the drivers installed for your device.
I've included his package from his thread.
Now I installed SuperSU first before even starting the root process because root isn't needed to just instal the app itself, it will just close once it's open.
Make sure you enable USB debugging and unknown sources before continuing. Extract the two files pie.jar and root.sh to the folder "platform-tools"
This folder should be on your desktop, at least thats where I put adt-bundle folder at. Once placed in to the folder hold shift and right and select "open command window here" and your command prompt should pop up. Connect your device and make sure you're powered on. Type "adb devices" and you should get an access message on your phone just give your phone the authorization. Type "adb devices" once more to make sure your device is listed.
Now to Semi-root the phone
These are to be entered one by one, just copy and paste them one by one.
adb push pie.jar /data/local/atvc
adb push root.sh /data/local/atvc
adb shell chmod 755 /data/local/atvc/root.sh
adb shell /data/local/atvc/root.sh
Your phone itself should disconnect from your computer (at least thats what mine did) and reconnect.
So far I haven't figured out how to work exposed but busy box and adblock plus and other simple root apps work just fine.
Remember this is a tethered root so if you shut off your phone you will have to redo the process every single time you do a hard reboot. Soft reboots work without problems, so unless your battery dies you really have no reason to restart your phone.
Click to expand...
Click to collapse
jcase said:
Please delete my binaries, as i update them from time to time, and the ones here would not be updated.
http://forum.xda-developers.com/moto-x/orig-development/root-4-4-x-pie-motorola-devices-t2771623 is the supported guide, with up to date binaries
Click to expand...
Click to collapse
I try to make a simple guide for people who don't want to dig and they get mad..... If I wanted to take the fame of you would I even have credited you at all? lol Man I had to go to a complete different site in order to learn because I was to lazy to dig through yours. My bad if it upset you man, as for everyone else I could care less, you can't please everyone.
super65man said:
I try to make a simple guide for people who don't want to dig and they get mad..... If I wanted to take the fame of you would I even have credited you at all? lol Man I had to go to a complete different site in order to learn because I was to lazy to dig through yours. My bad if it upset you man, as for everyone else I could care less, you can't please everyone.
Click to expand...
Click to collapse
I did not accuse you of anything, I simply asked that you remove the binary so that I could have a centralized point of distribution, to help prevent distribution of older binaries.
IE if you had took the first release, everyone who used your guide would be back here complaining, and blaming me since I can't update this guide.
Thread closed.
Please use the developer supported thread below.
jcase said:
Please delete my binaries, as i update them from time to time, and the ones here would not be updated.
http://forum.xda-developers.com/moto-x/orig-development/root-4-4-x-pie-motorola-devices-t2771623 is the supported guide, with up to date binaries
Click to expand...
Click to collapse
I have moved this from here https://forum.xda-developers.com/pixel-2-xl/how-to/zero-day-vzw-pixel-2-xl-root-t3977851/
Hey everyone!
I am here to post some good news. I have made a set of scripts that can give you temporary root through Magisk. It persists until the next reboot, but setting it up after the initial setup is a lot easier.
The script requires that it be run as root, which means that you need to run the temproot binary provided earlier.
Big thank you to Elliwigy for walking me through the initial process and for providing the commands.
Source code for the "exploit" binary can be found here, and compiled from source if you so desire.
This script is provided with no warranty whatsoever. This script may brick your phone. YOU ARE RUNNING THIS AT YOUR OWN RISK. I ACCEPT NO RESPONSIBILITY FOR WHAT THIS SCRIPT DOES TO YOUR PHONE.
Click to expand...
Click to collapse
IF YOU DO NOT WANT TO RISK YOUR PHONE BEING BRICKED, DO NOT CONTINUE!
Requirements:
A Verizon Pixel 2 (XL) on the September 2019 Security Patch
A computer with ADB If you need ADB, it can be found here
A USB cable
Appropriate USB drivers USB drivers can be found here if needed
Some knowledge of how to use the terminal
The taimentempmagisk.zip file (attached)
The APK for Magisk Manager (included in the zip)
Hope
Magisk and MagiskManager can also be downloaded from here if you wish.
If Magisk Manager prompts you to perform additional setup, DO NOT ACCEPT. (unless you like having a bricked phone)
Install the Magisk Manager APK onto your phone
Use ADB to push the attached ZIP file (taimentempmagisk.zip) to /data/local/tmp
Open an ADB shell and navigate to /data/local/tmp
Extract the ZIP file with the unzip command
Navigate into the scripts folder
Run ./exploit (If this step fails, repeat until you have a root shell)
Run ./installtemproot.sh magiskinit64
After you have done this, you now have root!
If you reboot and want root back, just run /data/local/tmp/scripts/exploit in an adb shell, then run /data/local/tmp/scripts/temproot.sh
Enjoy your root!
Does not work
Hexlay said:
Does not work
Click to expand...
Click to collapse
I'm currently working on a solution, it seems some terminal emulators error out on the mount command.
EDIT: Instructions updated.
logan2611 said:
I'm currently working on a solution, it seems some terminal emulators error out on the mount command.
EDIT: Instructions updated.
Click to expand...
Click to collapse
I'v tried, everything went fine, however magisk still does not detect root
Hexlay said:
I'v tried, everything went fine, however magisk still does not detect root
Click to expand...
Click to collapse
did u install magisk manager? if u dont have it installed then u womt b able to grant su permissions.. it does work as we spent hours testing and ensuring it works before he posted it.. id triple check each instruction and make sure u have magisk apk installed.. if not then reboot and try again from the beginning
elliwigy said:
did u install magisk manager? if u dont have it installed then u womt b able to grant su permissions.. it does work as we spent hours testing and ensuring it works before he posted it.. id triple check each instruction and make sure u have magisk apk installed.. if not then reboot and try again from the beginning
Click to expand...
Click to collapse
Yep, i have it pre-installed, i did follow every step provided, but prompt is not showing up and afterwards it does not detect root... Well, i'v done it several times, i tried ./temproot.sh after install script, but still same...
Well, i guess i have to reboot
Edit: tried reboot, still same.... i'll write down what i have done exactly.
Rebooted dvice
Went into terminal emulator and executed ./taimen
After that went one step back with cd .. and executed chmod -R 777 scripts
Then went to pc and entered ADB shell and executed ./taimen there too, because otherwise i was getting This script must be run as root. Exiting. on install script
Then ran install script. Process did complete successfully, however no magisk prompt was fired and afterwards root was not detected
I'v tried chmod -R 777 . even from adb shell, tried opening magisk app and then doing these whole process... no luck
First, thanks for your supporting and your instruction
I just install October(6/10) update so any risk if i follow your instruction
Anyone know how to delete the update? I've downloaded and refuse to restart my device in the wake of these new development
enigma2446 said:
Anyone know how to delete the update? I've downloaded and refuse to restart my device in the wake of these new development
Click to expand...
Click to collapse
I also want to know this. I need to reboot but I don't want to move to the October patch.
Hexlay said:
Yep, i have it pre-installed, i did follow every step provided, but prompt is not showing up and afterwards it does not detect root... Well, i'v done it several times, i tried ./temproot.sh after install script, but still same...
Well, i guess i have to reboot
Edit: tried reboot, still same.... i'll write down what i have done exactly.
Rebooted dvice
Went into terminal emulator and executed ./taimen
After that went one step back with cd .. and executed chmod -R 777 scripts
Then went to pc and entered ADB shell and executed ./taimen there too, because otherwise i was getting This script must be run as root. Exiting. on install script
Then ran install script. Process did complete successfully, however no magisk prompt was fired and afterwards root was not detected
I'v tried chmod -R 777 . even from adb shell, tried opening magisk app and then doing these whole process... no luck
Click to expand...
Click to collapse
Can you post the output of the script?
logan2611 said:
Can you post the output of the script?
Click to expand...
Click to collapse
That's output every time, it finishes script successfully
Hexlay said:
That's output every time, it finishes script successfully
Click to expand...
Click to collapse
Sorry, screenshot didn't load the first time. Looks like all the files are already in place, try rebooting and running temproot.sh
running ./taimen just gives a "permission denied" error
Some1CP said:
running ./taimen just gives a "permission denied" error
Click to expand...
Click to collapse
If you are getting this on the phone, you need to use a terminal emulator with access to a directory in /data. I used Termux in my example.
If you want to use Termux, here is how to get taimen running:
Install Termux
Open Termux and let it install
Run termux-setup-storage
Push the ZIP to /sdcard/Download
On the phone, move the ZIP file from ~/storage/downloads to ~
Continue from step 4 in OP
logan2611 said:
If you are getting this on the phone, you need to use a terminal emulator with access to a directory in /data. I used Termux in my example.
If you want to use Termux, here is how to get taimen running:
Install Termux
Open Termux and let it install
Run termux-setup-storage
Push the ZIP to /sdcard/Download
On the phone, move the ZIP file from ~/storage/downloads to ~
Continue from step 4 in OP
Click to expand...
Click to collapse
How would I move it to ~ without root?
Edit: nevermind, got it to run.
Just need to figure out how to make the temproot work.
Some1CP said:
How would I move it to ~ without root?
Click to expand...
Click to collapse
In Linux ~ is a shortcut for the home directory, which is always owned by the current user. Root is not required to move the ZIP from ~/storage/downloads to ~ on Termux.
Ok I can't run installtemproot.sh in adb, and neither on the phone itself through termux. Is there something I'm missing? su can't be find on the phone.
Edit: It works if you use Jack Pal's terminal emulator and you cd into its directory on adb. Sadly magisk doesn't recognize it's installed.
I'm on October 5 2018 security update and should flash September 5 2019 try temp root?I know stay away October's 2019 that's patch,sean
logan2611 said:
Sorry, screenshot didn't load the first time. Looks like all the files are already in place, try rebooting and running temproot.sh
Click to expand...
Click to collapse
Sorry for wait time, literally had to wait for type-c to type-c connection -_- it's pain....
Anyway i did reboot and tried again with just temproot.sh, without repeating previous stuff. No prompt is fired, but output is success
Hexlay said:
Sorry for wait time, literally had to wait for type-c to type-c connection -_- it's pain....
Anyway i did reboot and tried again with just temproot.sh, without repeating previous stuff. No prompt is fired, but output is success
Click to expand...
Click to collapse
client: launching new main daemon process
Click to expand...
Click to collapse
The output suggests that Magisk started successfully. What does Magisk Manager look like after running that script?