Related
Was trying to use a one-click root/unlock program for the Nexus 7. Apparently all the drivers did not install correctly. My tablet rebooted into bootloader mode, but is not responding to any volume button or power button pushes, or any combinations of button presses that I could think of.
I'm stuck at the "Start" bootloader screen. The text in the bottom left says the following:
FASTBOOT MODE
PRODUCT NAME - grouper
HW VERSION - ER3
BOOTLOADER VERSION - 3.34
BASEBAND VERSION - N/A
SERIAL NUMBER - [...]
SIGNING - not defined yet
LOCK STATE - LOCKED
Click to expand...
Click to collapse
ADB is no longer detecting the tablet as being detected, and no fastboot commands did anything at all.
I have no idea how to do a hard reset on this tablet, and can't find anything about it. Somebody? Anybody? Help?
edit: Power + VolDown seemed to work, but I had to hold it for quite awhile... much longer than I ever expected. Phew.
Did you get it to reboot normally? Go do a search for the Nus 7 image files. It will be a life saver.
Sent from my Nexus 7 using Tapatalk 2
sc4fpse said:
Was trying to use a one-click root/unlock program for the Nexus 7. Apparently all the drivers did not install correctly. My tablet rebooted into bootloader mode, but is not responding to any volume button or power button pushes, or any combinations of button presses that I could think of.
I'm stuck at the "Start" bootloader screen. The text in the bottom left says the following:
ADB is no longer detecting the tablet as being detected, and no fastboot commands did anything at all.
I have no idea how to do a hard reset on this tablet, and can't find anything about it. Somebody? Anybody? Help?
edit: Power + VolDown seemed to work, but I had to hold it for quite awhile... much longer than I ever expected. Phew.
Click to expand...
Click to collapse
As long as you have boot loader mode your in good shape. Download the system images from https://developers.google.com/android/nexus/images#nakasijrn84d and flash the images via terminal or cmd prompt
Sent from my Galaxy Nexus using xda premium
I have got the exact same problem. I have tried to flash the stock images to the device but as the bootloader is locked it won't work. Does anyone have any other solutions?
Edit: How long roughly should you have to hold down power and VolDown to hard reset the device?
conor253 said:
Edit: How long roughly should you have to hold down power and VolDown to hard reset the device?
Click to expand...
Click to collapse
Until it turns off.
You can also pull the back off with a fingernail or something and pull the battery connector, it isn't too hard.
Google brought up this topic. I received a used Nexus 7 bought from Amazon Warehouse Deals today. It seems that whoever had it before me botched something, as I cannot get past the initial boot. I was able to get to the bootloader mode, and the info near the bottom of the screen is identical to the original poster. I've never learned how to root or unlock a device before, but before I even try to learn that, I would highly appreciate if someone here can let me know if such a fix is even possible since the lock state is marked as "locked". If the bootloader is not unlocked, how will I reinstall the original firmware correctly?
Thanks so much to anyone that can help me. The physical device seems great - no creaks or screen lift, and very little backlight bleed. It'd be a shame to have to return this if I can just figure out how to undo whatever the previous owner messed up.
You can easily unlock it but before you do that, can you get into recovery? Make sure your device is connected to a powered on PC before going into recovery. Once in recovery, you can attempt to restore to factory.
I plugged the tablet into my MacBook before entering the bootloader screen. When I select "Recovery" from the options available to me, it just brings up the white Google logo and then the screen cuts to black.
Glad to know I'll be able to unlock the device... I was just worried that the fact that it is locked in its current state might make such a task difficult. Guess I'll start looking into how to go about unlocking the device - thanks for your help!
Well, problem I'm running into is that I can't put the tablet into the correct mode to be recognized by a program like mskip's Nexus 7 toolkit. The only part of the tablet I can access in the fastboot or bootloader menu (not sure of the correct term...), so when I attempted to connect the device up to my computer to use the program, it just got hung up on attempting to find my device. All the instructions talk about putting the tablet into USB mode and such, but I can't actually get into the OS to change any settings.
I only know how to do it on a PC. Maybe someone with a mac can chime in.
I do have access to a PC; could you explain what is needed? Thanks!
Go here, download and install the android sdk. Once complete, the android sdk manger will open. From the sdk manger, also install the android platform tools and google USB driver. Other options are not necessary.
http://developer.android.com/sdk/index.html
Then come back here for additional instructions. I'll be here for the next hour.
Done and done. Thanks very much for your assistance! What's next?
Now, go to the installation directory of the android sdk and you should see several files and folders. Of the folders, there should one labeled "platform tools" and another labeled "extras".
Go in to the "extras" folder then "google" folder. Within the google folder, there is a folder labeled "usb-driver". Just make sure the usb driver files and folders are in there.
Now, put your device in bootloader mode and connect it to the PC. Your PC will start installing the drivers. If it succeeds then double check it in device manager. If it does not, you need to manually install the drivers from device manager and point it to the "extras" folder as the location of the driver.
When the drivers are properly installed, in the device manager, it should say "android bootloader interface" under "android device" or something similar to that. If it doesn't, review the previous steps as you can’t go any further if the PC does not recognize the device.
Okay that is done - I see "Android Device" listed under Device Manager, as well as an entry for Google Nexus 7 Bootloader Interface... next?
Presuming the drivers are properly installed, go back to the android sdk installation folder and go in to the "platform-tools" folder. In that folder you should see several folders and files including “adb.exe” and “fastboot.exe”. Once in that folder, press the "shift" key AND the right mouse button to bring up the context menu. In the context menu selection, click "open command window here" and a command window will open up.
With your device still connected to the PC and the device in bootloader mode, in the command window, type “fastboot devices” without the quotes. If the drivers are properly installed, it will display your device’s serial number in the command window. If it does not, you have to review the above steps and correct the issue before proceeding forth.
The serial number is displaying; progress! Now?
Very good!!!
Once it displays your device’s serial number, you are all set to start flashing the factory image. Leave the device connected to you PC and leave the command window open. Go here and download the factory image:
https://dl.google.com/dl/android/aosp/nakasi-jro03d-factory-e102ba72.tgz
Once downloaded, extract it using winrar or whatever archive decompressor you are currently using. When extracted, you should have the following files:
bootloader-grouper-3.34.img
flash-all.sh
flash-base.sh
image-nakasi-jro03d.zip
Copy the “bootloader-grouper-3.34.img” and “image-nakasi-jro03d.zip” files into the “platform-tools” folder.
Or, just read this: http://forum.xda-developers.com/showthread.php?t=1907796
Ok, did that. Then?
I apologize if this question has been answered already, but I just spent 15 minutes using the search button and could not find a response.
I just installed Matr1x v10.5 (http://forum.xda-developers.com/showthread.php?t=2007231) onto my Nexus 4 but it had JB 4.2. Based on the version notes of the thread, I assumed that it was backwards compatible with my phone and therefore installed the new version on my Nexus 4. Now every time I turn on my Nexus 4 the screen is blank. What can I do to fix this issue? Will it require a reset so that all my data is lost? Thanks.
What do you mean with '... The screen is blank'?
Can you get past the google bootanimation?
Sent from my Nexus 4 using xda app-developers app
failly said:
What do you mean with '... The screen is blank'?
Can you get past the google bootanimation?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Nope, basically once I turn it on I see the "Google" text, and then the screen goes blank as in it's black. Basically the back light is on and you can see that it's on but the background is still black.
pooq said:
Nope, basically once I turn it on I see the "Google" text, and then the screen goes blank as in it's black. Basically the back light is on and you can see that it's on but the background is still black.
Click to expand...
Click to collapse
Go into recovery and flash the stock kernel. If that doesnt work you need to do a full wipe and reflash the rom.
failly said:
What do you mean with '... The screen is blank'?
Can you get past the google bootanimation?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Chromium_ said:
Go into recovery and flash the stock kernel. If that doesnt work you need to do a full wipe and reflash the rom.
Click to expand...
Click to collapse
Theoretically, if I flash v10.0 (which accommodates JB 4.2) it should fix the issue right?
I'm at a dilemma because I do not know if there are any other ways to insert the kernel into my phone as there is no microSD option on the Nexus 4. Does anyone know how I could potentially get the file into my phone?
pooq said:
Theoretically, if I flash v10.0 (which accommodates JB 4.2) it should fix the issue right?
I'm at a dilemma because I do not know if there are any other ways to insert the kernel into my phone as there is no microSD option on the Nexus 4. Does anyone know how I could potentially get the file into my phone?
Click to expand...
Click to collapse
Can you access recovery? If yes mount your storage and you can transfer the files.
Sent from my Nexus 4 using xda app-developers app
failly said:
Can you access recovery? If yes mount your storage and you can transfer the files.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I had already tried that, but once I connected my usb into my laptop I still couldn't transfer any files over.
In the end I reset my phone to factory settings, so the display still shows "Google". Just to confirm, the reason why this logo has been displayed on my phone for a while is because it is working to restore the factory setting (e.g. OS) correct?
pooq said:
I had already tried that, but once I connected my usb into my laptop I still couldn't transfer any files over.
In the end I reset my phone to factory settings, so the display still shows "Google". Just to confirm, the reason why this logo has been displayed on my phone for a while is because it is working to restore the factory setting (e.g. OS) correct?
Click to expand...
Click to collapse
I can't tell for sure since it never happend to me but I don't think if you choose to reset your phone to factory settings it will stay at the google logo.
If you choose to reset to facory settings I think you just will boot into recovery with that an android standing with something in his belly with a loading bar.
You can try this.
1.Boot into bootloader.
2A.Flash TWRP with the fastboot command and go to step 3.
2B.Flash stock N4 image with the fastboot command and profit!
3a.Try to mount storage and transfer another rom.
3b.Restore a backup.
Hopefully this works.
Sent from my Nexus 4 using xda app-developers app
failly said:
I can't tell for sure since it never happend to me but I don't think if you choose to reset your phone to factory settings it will stay at the google logo.
If you choose to reset to facory settings I think you just will boot into recovery with that an android standing with something in his belly with a loading bar.
You can try this.
1.Boot into bootloader.
2A.Flash TWRP with the fastboot command and go to step 3.
2B.Flash stock N4 image with the fastboot command and profit!
3a.Try to mount storage and transfer another rom.
3b.Restore a backup.
Hopefully this works.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I have tried the above instructions up to step 3 because it did not work for me.
It shows the only files in my internal storage(/sdcard) are a file that says (Up A Level) and TWRP. Also, whenever I want to reboot it prompts "No OS Installed! Are you sure you wish to reboot?" At this point I am only interested in a factory reset now so that I can reinstall the initial JB 4.0 that came with the Nexus 4 and then upgrade to JB 4.3. However, whenever I do factory reset via recovery mode, I am stuck with an empty phone with the files I mentioned above.
What can I do to fix the situation? Thanks.
pooq said:
I have tried the above instructions up to step 3 because it did not work for me.
It shows the only files in my internal storage(/sdcard) are a file that says (Up A Level) and TWRP. Also, whenever I want to reboot it prompts "No OS Installed! Are you sure you wish to reboot?" At this point I am only interested in a factory reset now so that I can reinstall the initial JB 4.0 that came with the Nexus 4 and then upgrade to JB 4.3. However, whenever I do factory reset via recovery mode, I am stuck with an empty phone with the files I mentioned above.
What can I do to fix the situation? Thanks.
Click to expand...
Click to collapse
I think the reason that a factory reset won't help since there is no OS on the phone so it cannot reset something that isn't there.
And with the steps I mentioned, can you get into bootloader or does it directly boot into recovery.
Another thing you can try(I don't think it will work but I never tried it so you never know)
Download this toolkit:
http://forum.xda-developers.com/showthread.php?t=2015469
There is an option to flash to stock completly, that will maybe do the trick.
Good luck!
Sent from my Nexus 4 using xda app-developers app
failly said:
I think the reason that a factory reset won't help since there is no OS on the phone so it cannot reset something that isn't there.
And with the steps I mentioned, can you get into bootloader or does it directly boot into recovery.
Another thing you can try(I don't think it will work but I never tried it so you never know)
Download this toolkit:
http://forum.xda-developers.com/showthread.php?t=2015469
There is an option to flash to stock completly, that will maybe do the trick.
Good luck!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I can get into bootloader fine, it does not boot directly into recovery.
My Nexus 4 is already flashed with TWRP. I have installed the program from the link you provided, however, I have not used it to flash my phone again as one of the prerequisites to using the program is selecting which OS version I am using (at this point I am not using any) and want to prevent any further issues from occurring.
It seems like I can't really do anything with my phone unless I get a JB OS reinstalled, which is what I am currently struggling with. I am presently trying to find a way to copy the downloaded Nexus image files provided online into my internal storage so I can install them.
pooq said:
I can get into bootloader fine, it does not boot directly into recovery.
My Nexus 4 is already flashed with TWRP. I have installed the program from the link you provided, however, I have not used it to flash my phone again as one of the prerequisites to using the program is selecting which OS version I am using (at this point I am not using any) and want to prevent any further issues from occurring.
It seems like I can't really do anything with my phone unless I get a JB OS reinstalled, which is what I am currently struggling with.
Click to expand...
Click to collapse
Okay since you can get into bootloader thats great news!
Have you tried to manually download the nexus 4 image from google?
NOTE this are direct download links:
4.3:
https://dl.google.com/dl/android/aosp/occam-jwr66v-factory-08d2b697.tgz
4.2.2:
https://dl.google.com/dl/android/aosp/occam-jdq39-factory-345dc199.tgz
Here is an excellent guide:
http://www.androidpolice.com/2013/0...-to-android-4-3-jwr66v-and-root-it-right-now/
Scenario #2 on that guide suits you!
I think this will do the trick!
Sent from my Nexus 4 using xda app-developers app
You just have to do the following :
A) flash a recovery via fastboot (fastboot flash recovery recovery.zip)
B) now go ahead and boot from your recovery, and push the rom of your choice, in case you don't have one already inside your sdcard (adb push ROM.zip /sdcard/ROM.zip)
C) flash your recently copied rom of choice to your phone. (if necessary, wipe data, cache and dalvik cache)
failly said:
Okay since you can get into bootloader thats great news!
Have you tried to manually download the nexus 4 image from google?
NOTE this are direct download links:
4.3:
https://dl.google.com/dl/android/aosp/occam-jwr66v-factory-08d2b697.tgz
4.2.2:
https://dl.google.com/dl/android/aosp/occam-jdq39-factory-345dc199.tgz
Here is an excellent guide:
http://www.androidpolice.com/2013/0...-to-android-4-3-jwr66v-and-root-it-right-now/
Scenario #2 on that guide suits you!
I think this will do the trick!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I just spent a couple of hours reading through the guides (and trying them out) which led me to several other guides. To be incredibly honest, I am completely confused as there is a plethora of new information thrown at me. I have to pose several questions before I continue:
1) When you say bootloader, are you referring to the fastboot bootloader screen that pops up after holding the volume down button and the power button? I just wanted to confirm this as I am starting to feel you are referring to something different after reading several guides.
2) Is the scenario 2 guide you posted basically a method to "sideload" the JB 4.3 into the storage of my Nexus 4 so I can install it via Recovery Mode?
I tried installing the drivers but I cannot seem to do it successfully as I do not even have a starting OS for my phone in the first place. I can not access a theoretical "Developer Mode" either from when I first rooted my phone.
So basically, I do not understand how I can get the direct downloads from Google (the JB 4.3 files) and get them into the internal storage of my Nexus 4 to install the OS.
Is there a simpler way to do this? If not, here is my current progress. At the moment I am stuck at this guide (http://forum.xda-developers.com/showpost.php?p=34552123&postcount=1) from the previous link you linked and am between C-D. I cannot get my laptop to recognize my device via fastboot devices in command prompt (D). To be honest, this is the second time I've seen this guide but could not get it working properly which is why I used the file provided at (http://forum.xda-developers.com/showthread.php?t=2015469) to root my Nexus 4.the OS[/B]. Is there a simpler way to do this? At the moment I am stuck at this guide (http://forum.xda-developers.com/showpost.php?p=34552123&postcount=1) from the previous link you linked and am between C-D. I cannot get my laptop to recognize my device via fastboot devices in command prompt (D). To be honest, this is the second time I've seen this guide but could not get it working properly which is why I used the file provided at (http://forum.xda-developers.com/showthread.php?t=2015469) to root my Nexus 4.
Yes, the bootloader is the one where you press vol down and the power button together, that's the place where you select to go to the recovery, use fastboot.
First thing you got to do is turn on your phone on the bootloader as mentioned above. Then, assuming you downloaded this: [NEXUS 4 TOOLKIT V2.0.0] from here http://forum.xda-developers.com/showthread.php?t=1995688, open up command prompt and go to this address with "cd C:\Google_Nexus_4_ToolKit" or where you decided to install your toolkit. On windows explorer, go there and rename fastboot-toolkit or whatever it is called to fastboot to make things simpler.
Type in cmd: fastboot devices to check if it recognizes your phone.
If it doesn't; then install these drivers (you should have your device already connected via USB to your computer): https://www.dropbox.com/s/a808emeelvxkwyc/usb_driver.rar
Go to Control Panel\Hardware and Sound > Device Manager. Your phone should appear with an exclamation mark somewhere, right click it and click on update driver:
-Click on browse my computer software
-Let me pick from a list of device drivers on my computer
-Have disk
-Browse for where you downloaded the drivers I linked you to then click ok.
-You should find within the next page something that says Android Bootloader Interface, double click it and finish the installation.
After that's done, then type in fastboot devices on cmd again, it should show up now.
Then, go to here and download TWRP 2.6.0.0 http://techerrata.com/file/twrp2/mako/openrecovery-twrp-2.6.0.0-mako.img , that will be your recovery. After you've downloaded move it to C:\Google_Nexus_4_ToolKit to make matters easier.
NOTE: IF YOUR BOOTLOADER IS LOCKED YOU WILL HAVE TO UNLOCK IT , this can be done by typing fastboot oem unlock on command prompt
Now, simply type in this command: fastboot flash recovery openrecovery-twrp-2.6.0.0-mako.img you will now have a recovery on your device.
With the volume keys, choose to boot from the recovery. TWRP will load, while its loading, rename adb-toolkit to adb to make things easier. When its done loading, type in adb devices to see if it recognizes your phone, if it doesn't use your drivers again but this time instead of choosing Android Bootloader Interface, pick the one that says ADB.
When that's done, and it recognizes your device with the adb devices command you can now proceed to "push" or "copy/move a ROM you've downloaded in your computer towards your phone".
Of course you have to download a ROM, like Paranoid Android for example: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.69-20130722.zip , along with its GApps: http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.2-20130719-signed.zip
You might have to even update your radio and bootloader in the future too, but let's leave it at that for now.
After you are done downloading the ROM of your choice, then type in these commands (assuming ADB works)
adb push pa_mako-3.69-20130722.zip /sdcard/
adb push pa_gapps-full-4.2-20130719-signed.zip /sdcard/
Having moved these two files inside your phone, now its time to flash them.
1) Go to Wipe on TWRP and simply swipe to factory reset
2) Go back and click on Install, look for pa_mako-3.69-20130722.zip and then add pa_gapps-full-4.2-20130719-signed.zip to the queue, swipe to install.
After that's done, simply reboot your phone and it should start booting up Paranoid Android and you're done. Might give you a few issues if you have an old radio and bootloader, but that can be fixed by flashing the new versions of these two in TWRP. Can be found here: https://www.copy.com/s/JniBu/4.3 files (mako) (these can be pushed via ADB like before, or you can simply download them on your phone when its working)
Hope this helps, don't think I can be more detailed.
wammie said:
Yes, the bootloader is the one where you press vol down and the power button together, that's the place where you select to go to the recovery, use fastboot.
First thing you got to do is turn on your phone on the bootloader as mentioned above. Then, assuming you downloaded this: [NEXUS 4 TOOLKIT V2.0.0] from here http://forum.xda-developers.com/showthread.php?t=1995688, open up command prompt and go to this address with "cd C:\Google_Nexus_4_ToolKit" or where you decided to install your toolkit. On windows explorer, go there and rename fastboot-toolkit or whatever it is called to fastboot to make things simpler.
Type in cmd: fastboot devices to check if it recognizes your phone.
If it doesn't; then install these drivers (you should have your device already connected via USB to your computer): https://www.dropbox.com/s/a808emeelvxkwyc/usb_driver.rar
Go to Control Panel\Hardware and Sound > Device Manager. Your phone should appear with an exclamation mark somewhere, right click it and click on update driver:
-Click on browse my computer software
-Let me pick from a list of device drivers on my computer
-Have disk
-Browse for where you downloaded the drivers I linked you to then click ok.
-You should find within the next page something that says Android Bootloader Interface, double click it and finish the installation.
After that's done, then type in fastboot devices on cmd again, it should show up now.
Then, go to here and download TWRP 2.6.0.0 http://techerrata.com/file/twrp2/mako/openrecovery-twrp-2.6.0.0-mako.img , that will be your recovery. After you've downloaded move it to C:\Google_Nexus_4_ToolKit to make matters easier.
NOTE: IF YOUR BOOTLOADER IS LOCKED YOU WILL HAVE TO UNLOCK IT , this can be done by typing fastboot oem unlock on command prompt
Now, simply type in this command: fastboot flash recovery openrecovery-twrp-2.6.0.0-mako.img you will now have a recovery on your device.
With the volume keys, choose to boot from the recovery. TWRP will load, while its loading, rename adb-toolkit to adb to make things easier. When its done loading, type in adb devices to see if it recognizes your phone, if it doesn't use your drivers again but this time instead of choosing Android Bootloader Interface, pick the one that says ADB.
When that's done, and it recognizes your device with the adb devices command you can now proceed to "push" or "copy/move a ROM you've downloaded in your computer towards your phone".
Of course you have to download a ROM, like Paranoid Android for example: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.69-20130722.zip , along with its GApps: http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.2-20130719-signed.zip
You might have to even update your radio and bootloader in the future too, but let's leave it at that for now.
After you are done downloading the ROM of your choice, then type in these commands (assuming ADB works)
adb push pa_mako-3.69-20130722.zip /sdcard/
adb push pa_gapps-full-4.2-20130719-signed.zip /sdcard/
Having moved these two files inside your phone, now its time to flash them.
1) Go to Wipe on TWRP and simply swipe to factory reset
2) Go back and click on Install, look for pa_mako-3.69-20130722.zip and then add pa_gapps-full-4.2-20130719-signed.zip to the queue, swipe to install.
After that's done, simply reboot your phone and it should start booting up Paranoid Android and you're done. Might give you a few issues if you have an old radio and bootloader, but that can be fixed by flashing the new versions of these two in TWRP. Can be found here: https://www.copy.com/s/JniBu/4.3 files (mako) (these can be pushed via ADB like before, or you can simply download them on your phone when its working)
Hope this helps, don't think I can be more detailed.
Click to expand...
Click to collapse
The first thing I'd like to do before reporting my progress report is to thank you and failly for taking the time to help me out. You both have contributed tremendously in trying to help me out with this, so I would like to thank you both for that.
1) I had installed the sdk program and changed the adb path (following this guide http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/)
Following wammie's guide:
2) Booted into bootloader
3) Downloaded and installed NEXUS 4 TOOLKIT V2.0.0 (had used it before but it didn't work for me so I relied on a different program to root my phone). Renamed fastboot-toolkit to fastboot
4) Typed fastboot devices in in cmd, does not recognize phone
5) Uninstalled current usb drivers and installed usb drivers provided. The driver I chose to install for was titled "Android". The other ! mark was "Base System Device" which was something I had never seen before until today when I had reinstalled usb drivers
6) Typed fastboot devices in cmd again and still nothing has changed
I am unable to continue any further as fastboot does not recognize my phone when I have it under bootloader. I had downloaded all the files that were recommended in your post. I think the reason why I cannot access fastboot devices is because there is literally no OS running in my phone. I could be wrong though.
I guess I'll take a break and call it a night since I've been trying to fix this problem the past 13 hours or so. Any additional feedback and support is appreciated!
Additional Notes: I have tried this both on my laptops (Windows 8) and on my desktop PC (Windows 7)
Luckly, if windows doesn't recognize your device while in fastboot it isn't because you don't have a OS installes but because not correctly set up drivers.
I posted a link some posta ago about a toolkit:
http://forum.xda-developers.com/showthread.php?t=2015469
When opening the program at the top there is a button called full driver installation, press it and follow the instructions.
Sent from my Nexus 4 using xda app-developers app
http://i.imgur.com/sOT7FGh.png
http://i.imgur.com/WNEKb0z.png
http://i.imgur.com/vUmTDcZ.png
http://imgur.com/da7NGwB
http://i.imgur.com/bjmhXZv.png
This is what you should do when you are updating the drivers, its imperative you get those drivers working. Otherwise, you won't get access to fastboot.
Oh I would recommend using a Windows 7 PC.
Windows 8 can also do the trick but you maybe need to disable driver signature enforcement, so you better go with windows 7 for now.
Sent from my Nexus 4 using xda app-developers app
Status Update:
I had spent a whole day reformatting my Windows 7 machine and am back at it. I have made a bit more progress than before.
1) After typing in fastboot flash recovery openrecovery-twrp-2.6.0.0-mako.img in command prompt, under the "List of devices attached" it is blank (i.e. there is no device attached). http://i.imgur.com/TnyBCKS.png
2) I have successfully installed the usb driver on my PC the first time when the only explanation mark was titled "Android", however the only Android option at the moment now is labelled "Android Bootloader Interface". No such thing as ADB (or any variations including Android ADB Interface) exists.
3) In TWRP Recovery mode, I see an exclamation mark titled mako but I believe that is irrelevant. I have tried installing the drivers to this just in case but failed. I then tried it again in Bootloader mode and mako is gone and Android Device pops up again with "Android Bootloader Interface"
4) I have tried restarting my PC and repeating the above steps.
Edit:
5) The only time I see an Android Composite ADB Interfaces is when I boot normally to the "Google" screen. However, I cannot move any of my ROMS over into my phone. When I typed "adb devices" it shows a bunch of characters with offline beside it. I do not have any options to reinstall any drivers for this.
From my understanding,I should be able to access the Android Composite ADB Interface while in recovery mode, which should let me transfer my ROMs over... but the issue is I cannot access Android Composite ADB Interface while in recovery mode.
Also, is there any reason why I shouldn't use the official JB 4.3 img as the ROM I want to install on my phone?
I believe I've hard-bricked my Nexus 7. I'm not stranger to flashing, etc., but something must have messed up this time. I was previously running stock Android 4.3 with TWRP recovery and my tablet took the OTA update. The update of course failed because of the root and recovery, but instead of going back to Android 4.3, it wouldn't boot past the fastboot screen (bootloader screen? with the green android).
So, planning to return to all stock, I downloaded the official Android 4.4 .tgz file and extracted it to my platform-tools folder for the Android SDK. I ran "flash-all.bat" as explained in this tutorial: http://www.androidpolice.com/2013/0...stock-using-a-full-factory-image-and-root-it/
Something must have went wrong because the screen went black and will not turn back on. When plugged into the PC, it is recognized as only an "APK" device. Sources online indicate that this is hard-bricked, as there is no "nvflash" openly available for the Nexus 7 to restore the bootloader.
1. What happened and how can others prevent this?
I think I should have flashed each partition individually (i.e. boot, recovery, system, etc) instead of "flash-all." Any idea what happened to the bootloader? Any other ideas on how to restore the bootloader?
2. What to do now?
EDIT: Apparently my device is out of warranty. Crap.
EDIT 2: Apparently I accidentally downloaded Android 4.4 (KRT16S) for the Nexus 7 Mobile (nakasig) and not for the Nexus 7 Wifi (nakasi)... Opps!
There are several Nexus 7s on ebay with cracked screens, etc. If I purchased one of these, what would I need to pull from them to fix this?
Thanks for your assistance in advance! This forum is great.
What about pressing and holding power button for more than 30 seconds?
Once it could boot and you could enter into fastboot mode, then I think you would get a chance to save it.
BTW, I did mess up when I was flashing KRT16O factory images, which was the earlier release for Kitkat.
At that time, I just used the flash-all.bat like you did. And in the second round, I still failed when following and typing the listed commands in flash-all.sh.
So I chose to use nexus toolkit after that.
Thanks for your reply.
I keep trying that, along with the various other combinations of power button and volume down and volume up. Nothing. The most that happens is when it's plugged into the PC, the PC makes the sound of something being connected and disconnected. I just tried unplugging the battery too. I'll let it charge over night and try again tomorrow.
When yours failed the first 2 times, you were still able to get into fastboot? You're right, if I can just get there then I'll be alright.
Thanks again.
I was just backtracking my steps and realized the mistake I made. I accidentally downloaded Android 4.4 (KRT16S) for the Nexus 7 Mobile (nakasig) and not for the Nexus 7 Wifi (nakasi). Major opps!!
1. Any way to recover from this brick? My gf also has a Nexus 7 (2012). Anything I can copy from that to restore mine? (if she even lets me touch it after she hears about this!)
2. There are several Nexus 7s on ebay with cracked screens, etc. If I purchased one of these, what would I need to pull from them to fix this?
No problem,bro. I think you can always get responses here at XDA though I didn't help you out.
And yes, I could still enter into Fastboot at that time.
However, I was not able to reboot my N7 using the aforementioned methods since it got stuck in Google logo.
Hence I removed the batterysilly, booted it and used the key combination to get into Fastboot. And you know the rest, used the toolkit....
My friend if u can enter fastboot then u can definately revive ur device, it is soft brick not hard brick (soft brick = software is dead) (hard brick = hardware is dead)
I do this all the time just for fun
Let me give u step by step instructions.
1. Download this tool kit
http://forum.xda-developers.com/showthread.php?t=1766475
2. Download the proper stock image for ur device (make sure u pay attention when u download the file, u definately dont want to download wrong file and then redownload the file again)
https://developers.google.com/android/nexus/images
3. Install toolkit, Select your device and don't worry about android version because u have non rit now and install the proper drivers for fastboot to work.
4. From toolkit main screen, select (softbrick/bootloop) and accept the warning.
5. Now select (Other/Browuse option) and then select (I Downlaoded a factory image myself) option then it will ask for the image that u downloaded from google website (Step 2).
6. If u have done exactly as i said then ur phone should be detected in Fastboot mode and the flashing would start and after some time phone should show loading screen (os is booting) wait for it to boot and enjoy ur stock android.
7. Enjoy.
FYI u should have enough battery (around 50%) and to enter fastboot mode u just have to boot to bootloader (restart/ power on the device while pressing volume down button) u should see the screen with bunch of numbers e.g bootloader version etc.
zamboniman87 said:
I was just backtracking my steps and realized the mistake I made. I accidentally downloaded Android 4.4 (KRT16S) for the Nexus 7 Mobile (nakasig) and not for the Nexus 7 Wifi (nakasi). Major opps!!
1. Any way to recover from this brick? My gf also has a Nexus 7 (2012). Anything I can copy from that to restore mine? (if she even lets me touch it after she hears about this!)
2. There are several Nexus 7s on ebay with cracked screens, etc. If I purchased one of these, what would I need to pull from them to fix this?
Click to expand...
Click to collapse
Hmm... there is a thread on making it unbrickable, but you have to do that ahead of time. If you were to buy a broken tablet, you'd probably need to replace the motherboard.
Sent from my Nexus 4 using XDA Premium 4 mobile app
xateeq said:
My friend if u can enter fastboot then u can definately revive ur device, it is soft brick not hard brick (soft brick = software is dead) (hard brick = hardware is dead)
Click to expand...
Click to collapse
Thanks for your help, but unfortunately I can't even enter fastboot. I can only enter APX mode, which apparently is pre-fastboot.
korockinout13 said:
Hmm... there is a thread on making it unbrickable, but you have to do that ahead of time. If you were to buy a broken tablet, you'd probably need to replace the motherboard.
Click to expand...
Click to collapse
Thanks. I saw that thread, but of course it was too late at that point. Perhaps I'll look into buying one with a cracked screen, or sell mine for parts on ebay.
Plz dont tell me u flashed wrong bootloader, plz plz plz.
zamboniman87 said:
I was just backtracking my steps and realized the mistake I made. I accidentally downloaded Android 4.4 (KRT16S) for the Nexus 7 Mobile (nakasig) and not for the Nexus 7 Wifi (nakasi). Major opps!!
Click to expand...
Click to collapse
Dammit, I just made this exact same mistake. Came here to XDA looking for help, and it seems that this may be one of those things that you simply can't recover from... sad day!
---------- Post added at 11:40 AM ---------- Previous post was at 11:09 AM ----------
SteveRiley said:
Dammit, I just made this exact same mistake. Came here to XDA looking for help, and it seems that this may be one of those things that you simply can't recover from... sad day!
Click to expand...
Click to collapse
Well, now isn't this weird... I unplugged the USB cable from my PC and then plugged it into the wall charger. After waiting a while, I was able to boot the Nexus into the "wrong" bootloader. I immediately flashed the correct one, and now am running the latest factory image.
@zamboniman87 -- I did find a thread on Android Central describing a situation in which someone erased their bootloader. The thread contains a tool that a couple folks claimed to help fix the problem. You might give that a try.
Lucky you! This gives me hope though. I'll check it out. Thanks!
xateeq said:
Plz dont tell me u flashed wrong bootloader, plz plz plz.
Click to expand...
Click to collapse
yep.... I feel dumb. haha.
xateeq said:
My friend if u can enter fastboot then u can definately revive ur device, it is soft brick not hard brick (soft brick = software is dead) (hard brick = hardware is dead)
I do this all the time just for fun
Let me give u step by step instructions.
1. Download this tool kit
http://forum.xda-developers.com/showthread.php?t=1766475
2. Download the proper stock image for ur device (make sure u pay attention when u download the file, u definately dont want to download wrong file and then redownload the file again)
https://developers.google.com/android/nexus/images
3. Install toolkit, Select your device and don't worry about android version because u have non rit now and install the proper drivers for fastboot to work.
4. From toolkit main screen, select (softbrick/bootloop) and accept the warning.
5. Now select (Other/Browuse option) and then select (I Downlaoded a factory image myself) option then it will ask for the image that u downloaded from google website (Step 2).
6. If u have done exactly as i said then ur phone should be detected in Fastboot mode and the flashing would start and after some time phone should show loading screen (os is booting) wait for it to boot and enjoy ur stock android.
7. Enjoy.
FYI u should have enough battery (around 50%) and to enter fastboot mode u just have to boot to bootloader (restart/ power on the device while pressing volume down button) u should see the screen with bunch of numbers e.g bootloader version etc.
Click to expand...
Click to collapse
I soft bricked my nexus 7 (2012), I was in Team Win Recovery and I selected Dalvik Cache, System, Cache, Data, Internal Storage and formated/deleted it , now I don't have system or recovery
img > https://www.dropbox.com/s/a7ojrr16lt8n27s/nexus bricked (3).JPG?dl=0
all I can load is fastboot mode
img> https://www.dropbox.com/s/jzmr7811w02r525/nexus bricked (2).JPG?dl=0
I will try to do all this steps that "xateeq" wroted and let you now how it went thanks!
psykg said:
I soft bricked my nexus 7 (2012), I was in Team Win Recovery and I selected Dalvik Cache, System, Cache, Data, Internal Storage and formated/deleted it , now I don't have system or recovery
img > https://www.dropbox.com/s/a7ojrr16lt8n27s/nexus bricked (3).JPG?dl=0
all I can load is fastboot mode
img> https://www.dropbox.com/s/jzmr7811w02r525/nexus bricked (2).JPG?dl=0
I will try to do all this steps that "xateeq" wroted and let you now how it went thanks!
Click to expand...
Click to collapse
hey it worked thanks!
at first there were problems with fastboot and drivers somehow usb 2.0 was a bit problematic but usb 1.0 was able to see device
after downloading many drivers (some from nexus tollkit some from web) , and after few restarts of device and bootloader, pc was able to recognize device and than I had to go 2 times with nexus tololkit >softbrick/bootloop
1st time failed
2nd time worked!
thank all!
Okay, I was trying to load android 6.0 on my oneplus one and I don't have any idea what I've done. I was following the instructions in this video https:/ /m.youtube.com/.watch?v=x8zuQcJHQy4 but I wanted to try to do it without using my laptop. So I downloaded the gapps from here http: //opengapps.org/ directly onto my phone. I restored my phone back to factory setting from the settings menu on my phone, and then tried to follow the instructions from the YouTube video. So I removed my existing op system and then tried to install the the new gapps from the recovery menu. The instal failed, so I went back and fired up the laptop and started to follow the instructions in the video. The problem is that my laptop won't connect with my phone for some reason. I plug it in to the computer but it won't recognize my phone. So I am unable to transfer the new gapps from my laptop to my phone. Now the problem is that my phone will not start up, it just sits on the starting screen (picture attached). What do i do?! I should mention that I have no idea what I'm doing if that isn't already extremely obvious. Please help!
Look as you described there maybe more than one solution to this..
As for me the easiest method would be is to flash a custom recovery by going into fastboot mode. And from there you can boot into your recovery and transfer whatever files you need from laptop to your phone. Then flash your custom ROM.
Recovery link : https://twrp.me/devices/oneplusone.html
Custom ROM: http://forum.xda-developers.com/oneplus-one/development/rom-ressurrection-remix-m-t3270147
Look my advice is don't make this whole process as few steps guide.
Divide it into small parts like first installing recovery. Then second part flashing custom ROM. It makes its easy. And for individual part you can find tutorial online.
Thanks me if I have helped and if you have any more doubt PM me.
Sent from my A0001 using Tapatalk
i started this process for the "recovery" in the link you gave me and i cant complete the instruction that tells me to go into the device settings and tap on the build number 7 times. I can even start the phone enough to get into the settings area. Any ideas?
Just go into fastboot mode and flow the given instruction..
Sent Using Awesome Nethunter Device.
Mr.Jlu said:
Just go into fastboot mode and flow the given instruction..
Sent Using Awesome Nethunter Device.
Click to expand...
Click to collapse
By fastboot do you mean where I power it up and hold the "down volume" button for a few seconds??
OnePlus One Fastboot
Power Down the OnePlus One
Press and Hold the Volume Up and Power Button at the Same Time
Hold These Buttons Down Until You See the Text “Fastboot”
When You See the Text “Fastboot”, Let Go of the Power and Volume Up Buttons
Sent Using Awesome Nethunter Device.
---------- Post added at 12:34 AM ---------- Previous post was at 12:34 AM ----------
In order to issue commands to your OnePlus One via tools like ADB and Fastboot, you need to boot your device up into Fastboot Mode. So, instead of allowing your OnePlus One to boot up into regular Android, you are going to do something special which tells the device to boot up into Fastboot Mode. This might take you a few tries until you get the hang of it. There’s no need to panic or worry if you get it wrong. Simple power down the OnePlus One again and give it another shot.
Sent Using Awesome Nethunter Device.
I can boot it up into fast boot mode without any problems, I just don't know what do do once there. That's the part I need help with.
turbo224 said:
I can boot it up into fast boot mode without any problems, I just don't know what do do once there. That's the part I need help with.
Click to expand...
Click to collapse
1. You need configured fasboot tools first.
2. Flash twrp using fastboot
3. Reboot to recovery
4. Connect your phone with the computer
5. Copy ROM and gapps to your phone and disconnect.
6. Make a full wipe in recovery
7. Flash ROM and gapps
8. Reboot
1. Follow this guide on setting up adb and fastboot - http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
2. Download twrp-3.0.2-0-bacon recovery from here - https://dl.twrp.me/bacon/
3. Put the recovery image in the same folder fastboot and adb exe is.
4. Put your phone in fastboot mode and connect to pc
5. Open a command prompt and type "fastboot flash recovery twrp-3.0.2-0-bacon.img"
6. Do Not issue the fastboot reboot command, instead press and hold power and vol down till phone reboots into recovery
I give up, i'm way over my head. I cant do any of this **** because I can't even get the right ****ing usb driver on my computer so it even recognizes my phone. I've tried three different methods and none of them work.
turbo224 said:
I give up, i'm way over my head. I cant do any of this **** because I can't even get the right ****ing usb driver on my computer so it even recognizes my phone. I've tried three different methods and none of them work.
Click to expand...
Click to collapse
Don't give up.
That's pretty simple if you follow the guide below TO THE LETTER.
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Basically, you just erased the Android operating system from your phone. The gapps is NOT the Android system. Gapps stands for Google Apps (play store, calendar, youtube, etc...). They are just additional apps, like Office for Windows for example.
Good luck!
Turbo224,from which country you are from? If you don't mind me asking!
Sent Using Awesome Nethunter Device.
I have unlocked the bootloader but I can not figure out how to root this thing at all. Has anyone had any success? I would like TWRP and SuperU.
this device is new yet. give it time
Tmobilefan906 said:
this device is new yet. give it time
Click to expand...
Click to collapse
Yeah I didn't realize how new this was whenever I posted it.
TWRP and root instructions available now in post 1 of
https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933/
dabadguycr said:
I have unlocked the bootloader but I can not figure out how to root this thing at all. Has anyone had any success? I would like TWRP and SuperU.
Click to expand...
Click to collapse
divineBliss said:
TWRP and root instructions available now in post 1 of
https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933/
Click to expand...
Click to collapse
You've already been helping me before you posted this.
People reading this thread might not realize we have root now. It's for their benefit .
dabadguycr said:
You've already been helping me before you posted this.
Click to expand...
Click to collapse
divineBliss said:
People reading this thread might not realize we have root now. It's for their benefit .
Click to expand...
Click to collapse
Good Point, I know my thread shows up first on Bing whenever I search for my phone and rooting help.
I have another XT and followed all instructions fine but no SuperSU when checking the phone. I tried flashing it twice (the one from the OP in main thread) and nothing. Am I missing a step?
I had installed fine on the first phone. this new one is 100% stock, unlocked bootloader, installed TWRP successfully but no supersu and root checker confirms no root.
Is it B140 or what? If you are missing a step, only you can check that.
powerserge1 said:
I have another XT and followed all instructions fine but no SuperSU when checking the phone. I tried flashing it twice (the one from the OP in main thread) and nothing. Am I missing a step?
I had installed fine on the first phone. this new one is 100% stock, unlocked bootloader, installed TWRP successfully but no supersu and root checker confirms no root.
Click to expand...
Click to collapse
divineBliss said:
Is it B140 or what? If you are missing a step, only you can check that.
Click to expand...
Click to collapse
Fixed
Can someone check the EMUI Huawei website for the unlock bootloader? Is it still working for requesting code? It keeps loop me back to the EMUI 5.0 page
sweetboy02125 said:
Can someone check the EMUI Huawei website for the unlock bootloader? Is it still working for requesting code? It keeps loop me back to the EMUI 5.0 page
Click to expand...
Click to collapse
Ya same. I got angry since I spent hours trying to find it so I just paid $4 and had DC-Unlocker unlock my bootloader.
sweetboy02125 said:
Can someone check the EMUI Huawei website for the unlock bootloader? Is it still working for requesting code? It keeps loop me back to the EMUI 5.0 page
Click to expand...
Click to collapse
webosFTW said:
Ya same. I got angry since I spent hours trying to find it so I just paid $4 and had DC-Unlocker unlock my bootloader.
Click to expand...
Click to collapse
If you follow this guide there should be no issue. The rootmygalaxy link should be pretty straightforward at unlocking the bootloader. The guide should be stickied in the OP.
https://forum.xda-developers.com/showpost.php?p=70515102&postcount=649
powerserge1 said:
If you follow this guide there should be no issue. The rootmygalaxy link should be pretty straightforward at unlocking the bootloader. The guide should be stickied in the OP.
https://forum.xda-developers.com/showpost.php?p=70515102&postcount=649
Click to expand...
Click to collapse
The issue is that https://emui.huawei.com/en/plugin.php?id=unlock that page hasnt worked for days. Keep redirecting me to the main page.
webosFTW said:
The issue is that https://emui.huawei.com/en/plugin.php?id=unlock that page hasnt worked for days. Keep redirecting me to the main page.
Click to expand...
Click to collapse
Yes use a different browser. Not working with chrome but working with edge. Go to the same link, it will bring you to EMUI 5.0 page, towards the top click on "download" then on the following page under the search bar click on "unlock bootloader" and it will bring you to the unlocking page. Just confirmed working. Updating the guide and will make a new post for root and twrp
Updated guide: https://forum.xda-developers.com/android/development/huawei-ascend-xt-h1611-feb27-2017-t3564389
Unlocked the boot loader, now adb/fastboot-15 Second won't work
Hello guys!
I used the 15 Second minimal adb/fastboot package from this site to unlock the boot loader. All seemed to go well, a screen message said success or something like that. It's been over 2 weeks since I had to put the phone down and take care of some other business. Now, after turning the phone off and then back on again when I am ready when I type in "fastboot devices" in the elevated cmd window in the adb directory the only message that comes back is "waiting on the device." Or the equivalent. I have tried what I could find from searching with Google to no avail. I am pretty sure that I am using the same cord, laptop, and everything that worked when I unlocked the boot loader. So, I am at a loss.
My goal originally was to use madvane20's slim downed version of b180 just to get it working again as my almost 2 years old P10 was stolen. I have no money in my budget for a new phone until Feb. 2020. I last talked with him in a series of PM's ending around May of last year, when a reply stated he had to get back to work on the last part of it. I have since seen a post referencing that it was ready in a package that after I had successfully unlocked the boot loader, it would root and install everything. This would have made me a happy guy... but I also noticed a custom ROM is now to be had based on Android 7. In order to get my Bank App's updated version of it's Mobile App to work, I have to install Android v 7 or higher. That's the main app that needs v 7 or better that I use daily. Several times...
But, now when I power up the phone, the first message is, "Your device has been unlocked and cannot be trusted... Press the Power Key now to reboot. Or the device will automatically reboot in 5 seconds." Which it does, the first time walking me through the Set-Up process, now it just boots into Huawei's EMUI 4.1. But, I cannot get adb to find the phone to follow the remainder of the instructions in the guide, "AT&T Huawei Ascend XT H1611 Feb27, 2017 update all things Root and TWRP (guide)"
Nor, can I get into the Recovery mode using the Vol Down/Power Keys.
So, where have I gone wrong or what is my next step? Since the phone can not be found and I can not get into Recovery using the proper keys what do I need to do and how do I do it?
I want to:
Root the phone.
Install the custom ROM I mentioned.
Or, Install an upgrade, if possible, to Android v 7... But,
can not get the phone recognized to get into a Recovery mode (is that right?) to push TWRP to it as well as the other files
it needs and to do whatever the Guides tell me to do.
Specs on the phone:
Model: H1611
Build: H1611C07B180
EMUI v: 4.1
Android v: 6.0.1
Security Patch level: September 1, 2017
Baseband v: 20234
Kernal v: 3.10.49-g03b627c
Sorry for the long post, but I thought it might answer some questions that came to mind before replying back.
Thanks in advance. I'm not here often, but when I am I am always relieved to get out of some jam I have gotten myself into!
mike0921
mike0921,
What happens if the phone is in normal mode and you type "adb devices" from the PC adb directory command prompt?
divineBliss said:
mike0921,
What happens if the phone is in normal mode and you type "adb devices" from the PC adb directory command prompt?
Click to expand...
Click to collapse
I just now found a new(er) USB cable for the phone. I also uninstalled the H1611 under Portable Devices in the Device Manager and rebooted the laptop. Where before, under Events the message was ".... needs further installation..." it now showed a successful install.
At the "adb devices" command, nothing happened, no response. I went and found the directions and explanations for the use of the top 30 commands. It told me to reboot the bootloader. A screen on the phone had me confirm the RSA command. Afterwhich the Fastoot&Recovery Mode screen with the little green Android guy with the message Phone Unlocked, FRP Unlock messages.
I went back to the elevated cmd window and at the adb directory command prompt entered "fastboot devices" and Voila! There were some letters and numbers, five or six spaces and the word "fastboot."
So, am I good to go with the rest of the steps in the guide from here? A question, about him saying to flash the Superuser zip file using TWRP. Is that suppose to already be on my SD card to flash it or can I flash it from my laptop without having to touch the phone or current USB cable? It seems stable but I am a bit gunshy and don't have much faith left in the old equipment I am having to use. A very old, refurbished HP Elitebook 8460P which is running really wonky, a not too new USB cable, the last of five I dug up and have used and finally works but is a bit loose, and Windows 10 1903 etc., which has disappeared all kinds of things I am having to run down) Can I use the "push" command to move the zip file to the SD card? And is that a fastboot function or an adb function? I seem to have read somewhere along the way to this point here that "push" is what I want to do, but powerserge1's Step 7 states to flash it using TWRP. I just want to check. And should questions from here on out be placed in his 184-page thread? I still haven't managed to read the whole thing, it seems to go off in so many other directions that I don't think I need to travel down. But, I will follow your advice.
I want to say a hearty thanks for your help. I was stuck, confused and frustrated at getting no results from Googling and reading for hours and getting nowhere it seemed. And I think I am good to go now.
Thoughts? Suggestions?
Just to be clear, The SuperSU zip file is currently on my laptop in the adb directory. Not on the phone.
mike0921 said:
I just now found a new(er) USB cable for the phone. I also uninstalled the H1611 under Portable Devices in the Device Manager and rebooted the laptop. Where before, under Events the message was ".... needs further installation..." it now showed a successful install.
At the "adb devices" command, nothing happened, no response. I went and found the directions and explanations for the use of the top 30 commands. It told me to reboot the bootloader. A screen on the phone had me confirm the RSA command. Afterwhich the Fastoot&Recovery Mode screen with the little green Android guy with the message Phone Unlocked, FRP Unlock messages.
I went back to the elevated cmd window and at the adb directory command prompt entered "fastboot devices" and Voila! There were some letters and numbers, five or six spaces and the word "fastboot."
So, am I good to go with the rest of the steps in the guide from here? A question, about him saying to flash the Superuser zip file using TWRP. Is that suppose to already be on my SD card to flash it or can I flash it from my laptop without having to touch the phone or current USB cable? It seems stable but I am a bit gunshy and don't have much faith left in the old equipment I am having to use. A very old, refurbished HP Elitebook 8460P which is running really wonky, a not too new USB cable, the last of five I dug up and have used and finally works but is a bit loose, and Windows 10 1903 etc., which has disappeared all kinds of things I am having to run down) Can I use the "push" command to move the zip file to the SD card? And is that a fastboot function or an adb function? I seem to have read somewhere along the way to this point here that "push" is what I want to do, but powerserge1's Step 7 states to flash it using TWRP. I just want to check. And should questions from here on out be placed in his 184-page thread? I still haven't managed to read the whole thing, it seems to go off in so many other directions that I don't think I need to travel down. But, I will follow your advice.
I want to say a hearty thanks for your help. I was stuck, confused and frustrated at getting no results from Googling and reading for hours and getting nowhere it seemed. And I think I am good to go now.
Thoughts? Suggestions?
Just to be clear, The SuperSU zip file is currently on my laptop in the adb directory. Not on the phone.
Click to expand...
Click to collapse
And after backing up in TRWP, I just checked the SD card's contents for the backup and saw the SuperSU zip file neatly placed on it as well. Just to be clear!??!
Okay, I somehow screwed this up I think. I was a little distracted by a friend dropping by. After telling her to give me a minute, I looked back at the phone after following Step 6:
Step 6: Confirm phone goes to FASTBOOT & RESCUE mode.
a) fastboot devices (to make sure your device is recognized)
b) fastboot boot TWRP.img (boots TWRP.img from Step 3)
c) The phone will boot into TWRP. Always select Keep Read Only from the first screen every time you go into TWRP.
Peek around a bit if you want to, then use TWRP to backup your stock recovery to external micro SD.
d) Reboot bootloader from inside TWRP to flash this custom recovery image (no adb command this time, you are rebooting to the bootloader from TWRP, you will see this option under "reboot" in TWRP).
e) fastboot flash recovery TWRP.img (now flashes TWRP recovery to the phone)
I then went to Step 7:
Step 7: After phone reboots, get into TWRP recovery repeating Step 6, a and b or hold the power button and volume up button from power-off state, then release when you see Huawei logo.
But now, the phone isn't being recognized again. And when I shut it off, hold Volume Up and Power buttons, I get a screen that asks if I want to: Reboot system now; Wipe data/factory reset; Wipe cache partition. Not the Recovery Screen with the options I got used to seeing in little green characters.
I tried the Reboot system now option and I'm back into the Huawei EMUI with everything appearing unchanged. Powered off, did the Vol Up + Power buttons and am back with the screen offering the three options I mentioned above. And the phone not being recognized after the "Devices" command.
Can you clarify my confusion? What am I doing wrong? Or not doing?
Thanks.
mike
---------- Post added at 06:47 PM ---------- Previous post was at 05:53 PM ----------
mike0921 said:
I just now found a new(er) USB cable for the phone. I also uninstalled the H1611 under Portable Devices in the Device Manager and rebooted the laptop. Where before, under Events the message was ".... needs further installation..." it now showed a successful install.
At the "adb devices" command, nothing happened, no response. I went and found the directions and explanations for the use of the top 30 commands. It told me to reboot the bootloader. A screen on the phone had me confirm the RSA command. Afterwhich the Fastoot&Recovery Mode screen with the little green Android guy with the message Phone Unlocked, FRP Unlock messages.
I went back to the elevated cmd window and at the adb directory command prompt entered "fastboot devices" and Voila! There were some letters and numbers, five or six spaces and the word "fastboot."
So, am I good to go with the rest of the steps in the guide from here? A question, about him saying to flash the Superuser zip file using TWRP. Is that suppose to already be on my SD card to flash it or can I flash it from my laptop without having to touch the phone or current USB cable? It seems stable but I am a bit gunshy and don't have much faith left in the old equipment I am having to use. A very old, refurbished HP Elitebook 8460P which is running really wonky, a not too new USB cable, the last of five I dug up and have used and finally works but is a bit loose, and Windows 10 1903 etc., which has disappeared all kinds of things I am having to run down) Can I use the "push" command to move the zip file to the SD card? And is that a fastboot function or an adb function? I seem to have read somewhere along the way to this point here that "push" is what I want to do, but powerserge1's Step 7 states to flash it using TWRP. I just want to check. And should questions from here on out be placed in his 184-page thread? I still haven't managed to read the whole thing, it seems to go off in so many other directions that I don't think I need to travel down. But, I will follow your advice.
I want to say a hearty thanks for your help. I was stuck, confused and frustrated at getting no results from Googling and reading for hours and getting nowhere it seemed. And I think I am good to go now.
Thoughts? Suggestions?
Just to be clear, The SuperSU zip file is currently on my laptop in the adb directory. Not on the phone.
Click to expand...
Click to collapse
And after backing up in TRWP, I just checked the SD card's contents for the backup and saw the SuperSU zip file neatly placed on it as well. Just to be clear!??!
Okay, I somehow screwed this up I think. I was a little distracted by a friend dropping by. After telling her to give me a minute, I looked back at the phone after following Step 6:
Step 6: Confirm phone goes to FASTBOOT & RESCUE mode.
a) fastboot devices (to make sure your device is recognized)
b) fastboot boot TWRP.img (boots TWRP.img from Step 3)
c) The phone will boot into TWRP. Always select Keep Read Only from the first screen every time you go into TWRP.
Peek around a bit if you want to, then use TWRP to backup your stock recovery to external micro SD.
d) Reboot bootloader from inside TWRP to flash this custom recovery image (no adb command this time, you are rebooting to the bootloader from TWRP, you will see this option under "reboot" in TWRP).
e) fastboot flash recovery TWRP.img (now flashes TWRP recovery to the phone)
I then went to Step 7:
Step 7: After phone reboots, get into TWRP recovery repeating Step 6, a and b or hold the power button and volume up button from power-off state, then release when you see Huawei logo.
But now, the phone isn't being recognized again. And when I shut it off, hold Volume Up and Power buttons, I get a screen that asks if I want to: Reboot system now; Wipe data/factory reset; Wipe cache partition. Not the Recovery Screen with the options I got used to seeing in little green characters.
I tried the Reboot system now option and I'm back into the Huawei EMUI with everything appearing unchanged. Powered off, did the Vol Up + Power buttons and am back with the screen offering the three options I mentioned above. And the phone not being recognized after the "Devices" command.
Can you clarify my confusion? What am I doing wrong? Or not doing?
Thanks.
mike
Sorry for the delay. What's the latest status with attempts to root the phone?