Recovering from USA BAND to AUTO mode in *#*#4636#*#* - Nexus 6P Q&A, Help & Troubleshooting

If you are unfortunate enough clicks USA BAND or other mode in 4636 caused no signal, please flash this ROM, you can revert to AUTO mode in 4636, find back signal
thanks the great God @bitdomo
https://mega.nz/#!g9IDWATT!qcB_SJAGaPbrQaFhlVzkIzgeWZ0m363aabUm3C8SjpU

@sneakymise @Ferasmn @jipjip777
---------- Post added at 06:36 AM ---------- Previous post was at 06:34 AM ----------
[/COLOR @sneakymise @Ferasmn @jipjip777
---------- Post added at 06:36 AM ---------- Previous post was at 06:36 AM ----------
[/COLOR @sneakymise @Ferasmn @jipjip777 @zhxhwyzh14

eudemonky said:
If you are unfortunate enough clicks USA BAND or other mode in 4636 caused no signal, please flash this ROM, you can revert to AUTO mode in 4636, find back signal
thanks the great God @bitdomo
https://mega.nz/#!g9IDWATT!qcB_SJAGaPbrQaFhlVzkIzgeWZ0m363aabUm3C8SjpU
Click to expand...
Click to collapse
Nice to see it is working

bitdomo said:
Nice to see it is working
Click to expand...
Click to collapse
Any plans to implement this in Nexus 6 and Nexus 5X?

Witek_M said:
Any plans to implement this in Nexus 6 and Nexus 5X?
Click to expand...
Click to collapse
Nexus 5x is here
Is Nexus 6 have the same issue?

bitdomo said:
Nexus 5x is here
Is Nexus 6 have the same issue?
Click to expand...
Click to collapse
Yes, Nexus 6 has same issue. http://forum.xda-developers.com/nexus-6/help/help-locked-nexus-to-usa-band-t2975290

Witek_M said:
Yes, Nexus 6 has same issue. http://forum.xda-developers.com/nexus-6/help/help-locked-nexus-to-usa-band-t2975290
Click to expand...
Click to collapse
Then it is time for cooking some roms!

bitdomo said:
Then it is time for cooking some roms!
Click to expand...
Click to collapse
If someone makes change back to "automatic" band selection will this setting remain if you decide to flash factory image?

Witek_M said:
If someone makes change back to "automatic" band selection will this setting remain if you decide to flash factory image?
Click to expand...
Click to collapse
Once you select automatic band with the rom I built you can flash whatever you want. The change remains permanent regardless of what rom are you going to flash afterwards (atleast for nexus 5x and nexus 6p)

shuaishuai said:
@sneakymise @Ferasmn @jipjip777
@zhxhwyzh14
Click to expand...
Click to collapse
thank you very much! @bitdomo @eudemonky@shuaishuai

bitdomo said:
Once you select automatic band with the rom I built you can flash whatever you want. The change remains permanent regardless of what rom are you going to flash afterwards (atleast for nexus 5x and nexus 6p)
Click to expand...
Click to collapse
Great

nvm

Can confirm this works. You are a £450 life saver friend.

This needs to be stickied. There a lot of people with this issue. I've been telling people to use Chroma to get it working again. It looks like this ROM has more options tho.

eudemonky said:
If you are unfortunate enough clicks USA BAND or other mode in 4636 caused no signal, please flash this ROM, you can revert to AUTO mode in 4636, find back signal
thanks the great God @bitdomo
Hi there, I looked everywhere on the site, I saw a mention of a Nexus 5 version of this ROM, can you point me in the right direction please?
Click to expand...
Click to collapse

Well I got stuck with this issue after traveling overseas. I already had a sim, but got no signal when I put it in upon arrival. Of course I pressed every button and changed every setting, who doesn't? Well it turns out the sim had expired and that was the original issue. It went downhill from there when I couldn't get any sim to work in my phone and had to revert to my backup OnePlus.
I've updated to the newest image, but I doubt there is any change that fixed this issue. Is there any way we can get this going without flashing another rom? I tried to get QPST going but didn't have any luck with driver setup.
The other question is how do you know it's fixed BEFORE traveling overseas again?

anybody success get band back to automatic after flash this rom?

pretty desperate as no technical service for 6p in my country,
flashed rom, multiple crashes, able to change radio to auto, still no signal. anyone?

This worked for me, 6p LTE signal drops. Before i Flashed rom, found the mm29m vendor image on afh, flashed rom, open gapps, vendor, rebooted. Had bunch of fc's but struggled to set everything up. Force stopped setup wizard. Logged into google.
Then did a factory reset. Earlier today on stock and on roms 4 lte drops, after flashing this, no more
Edit update:
Day 2 of no drops. Flashed 2 ROMs and all is well.
BEFORE I FOUND THIS FIX, I was losing LTE about every 3 hours, nothing fixed it. Flashed STK on toolkit, airplane mode, dialer codes, nothing.
Thanks OP!!

I am using a Moto X Pure XT1575. So sorry for my question not in the right place.
I have the same mistake to press USA band in *#*#4636#*#* and try many way to fix the problem. But, it is not completely work, I have 2G but lost 3G now.
I see that there is a thread in Moto X Pure about the Pure Nexus - Clark developing now:
forum.xda-developers.com/moto-x-style/development/rom-aosp-pure-nexus-clark-t3337479
@bitdomo: My questions is Can we modify this rom above Purenexus -Clark to make a Rom with Auto Band same as what you did for Nexus? If yes, please instruct/help to make this rom.
Thank you

Related

After i set GSM/UMTS to USA bands, can't make or receive calls

i have read all the posts about that, but nothing helped
tried to flash Chroma and select a different band, but this doesn't help
tried to flash stock/ factory reset/format data didn't helped at all...
any ideas?
idanoshri said:
i have read all the posts about that, but nothing helped
tried to flash Chroma and select a different band, but this doesn't help
tried to flash stock/ factory reset/format data didn't helped at all...
any ideas?
Click to expand...
Click to collapse
Yeah that's a setting you don't want to touch. I remember a thread here about how to fix this in this forum so a search will probably find it for you. I think people had to re flash the radio. Or flashing pure nexus. I don't remember now it was a while ago.
Sent from my Nexus 6P using XDA-Developers mobile app
---------- Post added at 06:56 AM ---------- Previous post was at 06:53 AM ----------
Gizmoe said:
Yeah that's a setting you don't want to touch. I remember a thread here about how to fix this in this forum so a search will probably find it for you. I think people had to re flash the radio. Or flashing pure nexus. I don't remember now it was a while ago.
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
Here it is. I found it.
http://forum.xda-developers.com/showthread.php?p=64321084
Fixed, thanks!

Can't Use CM13 with Unlocked L720?

So i've got a L720 that i've rooted, unlocked, and flashed CM12.1 snapshot, I flashed NAE baseband after unlocking and all is well, however I'd like to be able to use CM13, but every time that i flash either a nightly, or JDCTeam's optimized CM13 (which is what i'd prefer to use if a solution is available), It forces LTE/CDMA (auto) in the *#*#4636#*#* menu, if i pick GSM/WCDMA and reboot it just goes back to LTE/CDMA (auto) and i have no idea how to make it work, if there is even a way, does the GSM unlock not stick on 6.0.1 ROMs?
Thanks for any help you can give me :/
ThOnly1Lft said:
So i've got a L720 that i've rooted, unlocked, and flashed CM12.1 snapshot, I flashed NAE baseband after unlocking and all is well, however I'd like to be able to use CM13, but every time that i flash either a nightly, or JDCTeam's optimized CM13 (which is what i'd prefer to use if a solution is available), It forces LTE/CDMA (auto) in the *#*#4636#*#* menu, if i pick GSM/WCDMA and reboot it just goes back to LTE/CDMA (auto) and i have no idea how to make it work, if there is even a way, does the GSM unlock not stick on 6.0.1 ROMs?
Thanks for any help you can give me :/
Click to expand...
Click to collapse
Who is your carrier? You're going to need to flash an APN fix for your carrier to get proper data working.
Sent from my SCH-R220
mattzeller said:
Who is your carrier? You're going to need to flash an APN fix for your carrier to get proper data working.
Sent from my SCH-R220
Click to expand...
Click to collapse
MetroPCS is my carrier
ThOnly1Lft said:
MetroPCS is my carrier
Click to expand...
Click to collapse
You need to set your MetroPCS APNs to get data working,not sure if there is a flashable file, but google around
Sent from my SCH-R220
mattzeller said:
You need to set your MetroPCS APNs to get data working,not sure if there is a flashable file, but google around
Sent from my SCH-R220
Click to expand...
Click to collapse
I think you may be misunderstanding my issue or something.... When i flash a CM13 ROM i can't switch from LTE/CDMA mode to GSM/WCDMA mode in order to even get voice and texts... what will changing my APN do for that...?
ThOnly1Lft said:
I think you may be misunderstanding my issue or something.... When i flash a CM13 ROM i can't switch from LTE/CDMA mode to GSM/WCDMA mode in order to even get voice and texts... what will changing my APN do for that...?
Click to expand...
Click to collapse
Oh, I thought you were at least getting voice and SMS. Hmmm, I'm not too sure
Sent from my SCH-R220
mattzeller said:
Oh, I thought you were at least getting voice and SMS. Hmmm, I'm not too sure
Sent from my SCH-R220
Click to expand...
Click to collapse
deep sigh
ThOnly1Lft said:
deep sigh
Click to expand...
Click to collapse
That is the downside to making a non GSM phone work on a GSM network
Sent from my SCH-R220
mattzeller said:
That is the downside to making a non GSM phone work on a GSM network
Sent from my SCH-R220
Click to expand...
Click to collapse
Seems i may just be unable to use marshmallow ROMs and keep the GSM Unlock :/
Did anyone find a solution for this? I'm trying to use a Sprint Domestic Unlocked 720T with AT&T and running into the same issue. Cannot select GSM at all, no matter where (network mode shows -1). I've tried different modems, build.prop, hidden menus, etc. No GSM on the cm13 for the 720t??
blazie151 said:
Did anyone find a solution for this? I'm trying to use a Sprint Domestic Unlocked 720T with AT&T and running into the same issue. Cannot select GSM at all, no matter where (network mode shows -1). I've tried different modems, build.prop, hidden menus, etc. No GSM on the cm13 for the 720t??
Click to expand...
Click to collapse
Looks like we may be stuck on CM12 or LP based custom ROMs my friend
To be perfectly honest, you're not missing out on anything, having run the same ROM of LP and of MM, there is no real difference in regards to performance and battery life.
Sent from my SPH-L720 using Tapatalk
This is really sad... I've spent 3 days flashing various modems and can't find nothing. Though, I'd point out my LP kinda behaves same as my M, when it's done loading apps after flashing, it ask to insert simcard (same like my M), but then I go change the network type to 3g and network returns on the phone. Tried with cm13 but nothing, does anyone know what could be wrong??
my L720 detect sim but signal not work

Problem with my signal after i flashed 8.1 (Oreo)

Hi!
I have rooted my phone, and i have flashed Oreo RR and everything is working, BUT...when i have 4G (LTE) my signal drops down and suddenly i dont have a signal. Even if i dont have 4G on my signal drops.
But if a am on 2G network my signal is full and no drops whatsoever.
I have tried to go back and flash 7.1 But same problem there.
So my question, is it someting wrong with my phone? Because i remember that i didnt have these kind of issue before i flashed a ROM.
beh-hexen said:
Hi!
I have rooted my phone, and i have flashed Oreo RR and everything is working, BUT...when i have 4G (LTE) my signal drops down and suddenly i dont have a signal. Even if i dont have 4G on my signal drops.
But if a am on 2G network my signal is full and no drops whatsoever.
I have tried to go back and flash 7.1 But same problem there.
So my question, is it someting wrong with my phone? Because i remember that i didnt have these kind of issue before i flashed a ROM.
Click to expand...
Click to collapse
Just take efs backup so that if anything goes wrong it may help in future,
Restore the persist backup as I had shown in this thread
https://forum.xda-developers.com/g5-plus/how-to/solved-volte-fix-lost-flashing-stock-rom-t3773524
akshu2697 said:
Just take efs backup so that if anything goes wrong it may help in future,
Restore the persist backup as I had shown in this thread
https://forum.xda-developers.com/g5-plus/how-to/solved-volte-fix-lost-flashing-stock-rom-t3773524
Click to expand...
Click to collapse
Thx. But that thread is for volte right? I dont have Volte.
beh-hexen said:
Thx. But that thread is for volte right? I dont have Volte.
Click to expand...
Click to collapse
Yes ,thread is for volte recover.
akshu2697 said:
Yes ,thread is for volte recover.
Click to expand...
Click to collapse
I dont have volte my friend. I live in Sweden.
beh-hexen said:
I dont have volte my friend. I live in Sweden.
Click to expand...
Click to collapse
Okk,then I have no idea about your problem.
Sorry brother
Any one found a fix for this? I also have random signal drops even after some tweaking in the mobile data settings. This doesn't happen on stock or other nougat roms. I really want to run Oreo on my phone
EDIT: I still have 4g+ when my signal drops but for a few seconds people cant seem to reach me because of the signal drop
InsaneNexuS said:
Any one found a fix for this? I also have random signal drops even after some tweaking in the mobile data settings. This doesn't happen on stock or other nougat roms. I really want to run Oreo on my phone
EDIT: I still have 4g+ when my signal drops but for a few seconds people cant seem to reach me because of the signal drop
Click to expand...
Click to collapse
It's a bug in Oreo, there is no fix.
Cupcake 1.5 said:
It's a bug in Oreo, there is no fix.
Click to expand...
Click to collapse
Ok, thank you for answering! Finally a clear answer. Guess people just live with it
You have to restore full nougat stock image.....and then if you wanna go oreo then before doing that you have to backup EFS partition....install then Only Pixel Experience pr Lineage custom roms....if needed after iflashing custom roms restore only efs partition from nougat into oreo...that should do the trick
beh-hexen said:
Hi!
I have rooted my phone, and i have flashed Oreo RR and everything is working, BUT...when i have 4G (LTE) my signal drops down and suddenly i dont have a signal. Even if i dont have 4G on my signal drops.
But if a am on 2G network my signal is full and no drops whatsoever.
I have tried to go back and flash 7.1 But same problem there.
So my question, is it someting wrong with my phone? Because i remember that i didnt have these kind of issue before i flashed a ROM.
Click to expand...
Click to collapse
yes bro 4G single drops Oreo rom...?
I have to say that after flashing any of the 8.1 roms it is a crap shoot whether I get any voice signal (4G) at all when I reboot. I kinda wish I never would have updated to any of these 8.1 roms. I know there was warnings when I first bought the phone about saving your EFS and other aspects of your stock rom and I did do that. But man,,I dont know if it was that the devs just didnt know or what,,,but I would have rather stayed on Nougat and not have to worry if my phone signal will come back after a reboot. And it happens with every 8.1 rom at some point and trust me those out there saying "well it never happened to me, give it time, it will LOL. Not complaining, we all signed up for this when we tinker with the phones like we do, but if I had known it would be like this then i would have stayed stock.
LLegion said:
You have to restore full nougat stock image.....and then if you wanna go oreo then before doing that you have to backup EFS partition....install then Only Pixel Experience pr Lineage custom roms....if needed after iflashing custom roms restore only efs partition from nougat into oreo...that should do the trick
Click to expand...
Click to collapse
What if I used a stock debloated franco28 rom? Would that work the same way? Or do I really need to go back to full stock ?
---------- Post added at 16:41 ---------- Previous post was at 15:59 ----------
Archangel said:
I have to say that after flashing any of the 8.1 roms it is a crap shoot whether I get any voice signal (4G) at all when I reboot. I kinda wish I never would have updated to any of these 8.1 roms. I know there was warnings when I first bought the phone about saving your EFS and other aspects of your stock rom and I did do that. But man,,I dont know if it was that the devs just didnt know or what,,,but I would have rather stayed on Nougat and not have to worry if my phone signal will come back after a reboot. And it happens with every 8.1 rom at some point and trust me those out there saying "well it never happened to me, give it time, it will LOL. Not complaining, we all signed up for this when we tinker with the phones like we do, but if I had known it would be like this then i would have stayed stock.
Click to expand...
Click to collapse
Yeah same.. I just wish I could go back to stock with OTA support that wouldn't brick my phone This phone is a pain in the butt compared to other going back to full stock with OTA support TBH
LLegion said:
after iflashing custom roms restore only efs partition from nougat into oreo...that should do the trick
Click to expand...
Click to collapse
Would a custom Oreo ROM still boot with a stock Nougat EFS partition?
Cupcake 1.5 said:
It's a bug in Oreo, there is no fix.
Click to expand...
Click to collapse
Signal bars seems to be an issue with most Oreo ROMs I've tried (Lineage, PixelExperience, Ressurection, AOSPExtended, MSM). I've even tried flashing my backed up Persist/EFS. However I've noticed that my phone is still reachable and can make calls even when it shows the "No Service" message. As soon as it does the signal bars get updated so not sure if this is not just a UI glitch.
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
akshu2697 said:
Just take efs backup so that if anything goes wrong it may help in future,
Restore the persist backup as I had shown in this thread
https://forum.xda-developers.com/g5-plus/how-to/solved-volte-fix-lost-flashing-stock-rom-t3773524
Click to expand...
Click to collapse
Ok just flashed my pre-Oreo EFS and persist backup and it still works. Didn't notice any issues or improvement though.
rbk281 said:
Signal bars seems to be an issue with most Oreo ROMs I've tried (Lineage, PixelExperience, Ressurection, AOSPExtended, MSM). I've even tried flashing my backed up Persist/EFS. However I've noticed that my phone is still reachable and can make calls even when it shows the "No Service" message. As soon as it does the signal bars get updated so not sure if this is not just a UI glitch.
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
Ok just flashed my pre-Oreo EFS and persist backup and it still works. Didn't notice any issues or improvement though.
Click to expand...
Click to collapse
i believe it's an UI issue, i mean my signal bar drops every 3 minutes and changes from 4G to 3G all the time but the internet works very fast like stock
hello, friends. Specially those who are worried about the so many problems with signal moto g5 users face. Im here asking for help. i have a moto g5 (cedric) i was working almost fine with oreo stock. i say almost because some times when i lost signal it didnt recover like any other phone woud, i had to reboot. now from almost a week ago i had lost signal and now i only have 4g. no 3G and no 2G, so no voice calls going out nor incoming ones. i ve done hard resets, flashing stock 7.0 and going back to stock 8.1 and nothing. on saw 3g for a little moment coming back to oreo. i also flashed carbon rom wich is android 9.0 to see if a custom rom helped but it didnt. i only have internet now and sms. and this is very frustrating. ive checked persist folder and everything is correct there. i have my imei right, this phone is like new but not being able to call is like not having a phone at all. also why i have to reboot to recover missing signal? is just a pain. this moto phones are really problematic when it comes to Signal management.
things to consider too: im currently on stock oreo, just rooted to be able to check if persist folder was correct and to backup efs folder. also my operator uses 900mhz band as 2g and 3g wich is an european frecuency not common in latin america. maybe that has something to do with problems im facing. the rom has cedric_latam_cust as the baseband. can anyone help me find one frome europe? im wondering if flashing one from there could help. the weird thing is that it was working before with that baseband.
so many people losing 4g, i could be glad if that was my case and had 2g and 3g only with full internet and calling capabilities.
im sorry i know it is a little bit too much information. but i really need the help

Lost LTE after PIE

Hello guys.
I have an issue since I decided to flash a pie rom, specifically simplix blue, have no idea if has something to do with that rom.
I used to have LTE as normal and everything was good. Since I flashed a PIE rom I lost LTE. I tried going back to stock and LTE is still gone. Had tried flashing some modems, did not work either. Tried several radio combinations on *#*#4636#*#* did not work.
Any suggestions? I am on Tigo Colombia as carrier and never had this issue before across several xiaomi devices that I have had
Flash stock rom and start over
nor working( volte) for me i switched to airtel.
you can try fleshing vender and other files but not worked 4 me
apexashwin said:
Flash stock rom and start over
Click to expand...
Click to collapse
Already did it. Did not work.
drazrwl said:
nor working( volte) for me i switched to airtel.
you can try fleshing vender and other files but not worked 4 me
Click to expand...
Click to collapse
Nope.
I had found a solution already. It is kinda long so tomorrow I Will post a guide. For some reason the band 4 that was the one that my carrier uses was blocked. So I had to unblock it
I have seen several people here with similar issues and not being able yo Solve it. Hopefully the tutorial that I Will make, help them as well.
I have the same problem, any way to fix it?
davnc18 said:
I have the same problem, any way to fix it?
Click to expand...
Click to collapse
Yep, I have been quite busy, as soon as I have time, I will post a tutorial. Meanwhile, take a look at this post, read first part of post 3 and then post 7.
https://forum.xda-developers.com/lenovo-p2/how-to/enabled-4g-ca-p2-t3707584
As soon as you finish adding the band, install network signal guru, provide root admin rights and then select on the 3 dots at the top right corner lock bands, select lte and pick up the band missing and reboot.
Also facing this, I'm waiting for tutorial.
marko.dnb said:
Also facing this, I'm waiting for tutorial.
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a1/how-to/lte-t3854592
Here it is.

Bought a used N900v with TWRP installed and no 4G signal just 3G

I have 2 N900V phones with Alliance roms with safestrap on both. , wifes phone has a a bad switch so i bought a used N900V on Swappa. The phone came with TWRP installed so i flashed Alliance rom and everything works on except it is stuck on 3G. have tried most suggestions i could find and nothing works. So i thought it might be the rom, thought i remembered reading some where that Alliance rom may not work on TWRP. I installed Android 8.1]LineageOS 15.1 which works ok but still no 4G. The phone has a 4G back cover and model numbers are newer than my other 2 phones. Any ideas? Thanks for any help, my wife loves this phone Also i tried my sim card and both sim cards are new.
dmcccrae said:
I have 2 N900V phones with Alliance roms with safestrap on both. , wifes phone has a a bad switch so i bought a used N900V on Swappa. The phone came with TWRP installed so i flashed Alliance rom and everything works on except it is stuck on 3G. have tried most suggestions i could find and nothing works. So i thought it might be the rom, thought i remembered reading some where that Alliance rom may not work on TWRP. I installed Android 8.1]LineageOS 15.1 which works ok but still no 4G. The phone has a 4G back cover and model numbers are newer than my other 2 phones. Any ideas? Thanks for any help, my wife loves this phone Also i tried my sim card and both sim cards are new.
Click to expand...
Click to collapse
In setting about phone what is the baseband?
Thank you for your response. The new phone Baseband is N900VVRUE0F1. Both other phones are RUCNC4
I am not sure how TWRP works , is it overlaid on factory rom like my other phones which have safestrap ?
dmcccrae said:
Thank you for your response. The new phone Baseband is N900VVRUE0F1. Both other phones are RUCNC4
I am not sure how TWRP works , is it overlaid on factory rom like my other phones which have safestrap ?
Click to expand...
Click to collapse
TWRP replaces stock recovery if you're not using safestrap or bootstrap and the custom ROM replaces the factory ROM. Does the new phone have an unlocked bootloader or is it using safestrap? Which custom ROM are you using.
cssr said:
TWRP replaces stock recovery if you're not using safestrap or bootstrap and the custom ROM replaces the factory ROM. Does the new phone have an unlocked bootloader or is it using safestrap? Which custom ROM are you using.
Click to expand...
Click to collapse
I do not know if the boot loader is unlocked, how do i check? The phone came with TWRP and i have installed the Alliance rom using TWRP
dmcccrae said:
I do not know if the boot loader is unlocked, how do i check? The phone came with TWRP and i have installed the Alliance rom using TWRP
Click to expand...
Click to collapse
If the it's unlocked you may see a unlocked pad lock on the screen, after boot or reboot. Also if you boot into download mode and wait a few minutes a list of text will show up, one line will be " Developer Device ". If it is unlocked.
Read this, ( all of it, its short )it will help you update TWRP.
https://forum.xda-developers.com/verizon-galaxy-note-3/help/trouble-flashing-custom-rom-t3887320
Alliance ROM looks old (Android 4.4) from what I can find. Your baseband is for Android 5.0 or higher. After TWRP update you will be using HLTETMO ROMs and a lineageOS ROM like this one.
https://forum.xda-developers.com/ga...eageos-15-1-hltetmo-unofficial-t3829154/page1
Or one of the other ROMs here:
https://forum.xda-developers.com/galaxy-note-3/development
May be best for you. Read the first post in the tread of any ROM you want use. If you have a problem with a ROM use search in that ROMs tread, most questions have already been answered. You can also ask me here for help. Good luck and always make a backup before making big changes.
cssr said:
If the it's unlocked you may see a unlocked pad lock on the screen, after boot or reboot. Also if you boot into download mode and wait a few minutes a list of text will show up, one line will be " Developer Device ". If it is unlocked.
Read this, ( all of it, its short )it will help you update TWRP.
https://forum.xda-developers.com/verizon-galaxy-note-3/help/trouble-flashing-custom-rom-t3887320
Alliance ROM looks old (Android 4.4) from what I can find. Your baseband is for Android 5.0 or higher. After TWRP update you will be using HLTETMO ROMs and a lineageOS ROM like this one.
https://forum.xda-developers.com/ga...eageos-15-1-hltetmo-unofficial-t3829154/page1
Or one of the other ROMs here:
https://forum.xda-developers.com/galaxy-note-3/development
May be best for you. Read the first post in the tread of any ROM you want use. If you have a problem with a ROM use search in that ROMs tread, most questions have already been answered. You can also ask me here for help. Good luck and always make a backup before making big changes.
Click to expand...
Click to collapse
Thank you for the links, Bootloader appears unlocked as i get the custom unlocked padlock when it boots. I have 3.2.3-0 TWRP already and i flashed the 15-1 Linage rom and it works fine . My main problem is no 4G on any rom. Do you think i need to update or change baseband? Thanks again for the help.
I have the same issue except I get No service after 1 reboot or any twrp backups.
dmcccrae said:
Thank you for the links, Bootloader appears unlocked as i get the custom unlocked padlock when it boots. I have 3.2.3-0 TWRP already and i flashed the 15-1 Linage rom and it works fine . My main problem is no 4G on any rom. Do you think i need to update or change baseband? Thanks again for the help.
Click to expand...
Click to collapse
Your baseband is OK. Did you do a clean install and what does the status bar say for the cell signal?
---------- Post added at 01:39 PM ---------- Previous post was at 01:33 PM ----------
Dlind said:
I have the same issue except I get No service after 1 reboot or any twrp backups.
Click to expand...
Click to collapse
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.[/QUOTE]
Im starting to believe my issue is I have a Verizon note 3 board in a sprint phone I put the Verizon back plate back on
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
Also when I did get service 1x-4g the network name was "roaming indicator off". For maybe 2 minutes it stayed " Verizon wireless"
I just remembered that all touch wiz Roms do the same thing to me. Also for some reason I can't flash stock based Roms. I'm getting a little worried about my note 3
Dlind said:
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
Im starting to believe my issue is I have a Verizon note 3 board in a sprint phone I put the Verizon back plate back on
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
Also when I did get service 1x-4g the network name was "roaming indicator off". For maybe 2 minutes it stayed " Verizon wireless"
I just remembered that all touch wiz Roms do the same thing to me. Also for some reason I can't flash stock based Roms. I'm getting a little worried about my note 3[/QUOTE]
I would make a full backup and try a custom ROM that's not a touch wiz ROM ported to note 3. It may fix the phone and if not restore the backup.
cssr said:
Your baseband is OK. Did you do a clean install and what does the status bar say for the cell signal?
---------- Post added at 01:39 PM ---------- Previous post was at 01:33 PM ----------
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
cssr said:
Your baseband is OK. Did you do a clean install and what does the status bar say for the cell signal?
---------- Post added at 01:39 PM ---------- Previous post was at 01:33 PM ----------
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
dmcccrae said:
#1 I think i did a clean install , each time i do an advanced wipe and tick all the boxes go back and install rom
#2 i get the same amount of bars as both my other phones, 3-4 bars only new phone is 3G and both other phones are 4G. also i have line of sight to cell tower a couple of miles away.
#3 have tried power down and reboot and still 3g.
Click to expand...
Click to collapse
I almost think you have a hardware problem. The only way to be sure is to go back to shock, but it's a pain to root, unlock the bootloader and install TWRP again to get back to using custom ROMs. I let you know if I think of anything else.
---------- Post added at 04:30 AM ---------- Previous post was at 04:25 AM ----------
Dlind said:
Try turning the phone off for a minute and then back on. I've had a no signal problem a few times, reboot and/or power down got the signal back.
Click to expand...
Click to collapse
Im starting to believe my issue is I have a Verizon note 3 board in a sprint phone I put the Verizon back plate back on
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
Also when I did get service 1x-4g the network name was "roaming indicator off". For maybe 2 minutes it stayed " Verizon wireless"
I just remembered that all touch wiz Roms do the same thing to me. Also for some reason I can't flash stock based Roms. I'm getting a little worried about my note 3[/QUOTE]
I would make a full backup and try a custom ROM that's not a touch wiz ROM ported to note 3. It may fix the phone and if not restore the backup.
Thank you for the help. I need help getting back to stock, i tried a stock program with odin 3 but i keep getting fail. I may be using the wrong stock rom as you noted this a a newer system.
# 1 Iam i doing the right process with odin 3 ?
#2 can you point me to the correct stock rom?
#3 can you tell me how to message another menber as i have not been able to find a link, the person i got the phone on Swappa from an XDA member and maybe he may know how to fix before i start from scratch.
Thank you for your help and sorry about the extra posts above, did not relize it was on page 2 (newbie)
dmcccrae said:
Thank you for the help. I need help getting back to stock, i tried a stock program with odin 3 but i keep getting fail. I may be using the wrong stock rom as you noted this a a newer system.
# 1 Iam i doing the right process with odin 3 ?
#2 can you point me to the correct stock rom?
#3 can you tell me how to message another menber as i have not been able to find a link, the person i got the phone on Swappa from an XDA member and maybe he may know how to fix before i start from scratch.
Thank you for your help and sorry about the extra posts above, did not relize it was on page 2 (newbie)
Click to expand...
Click to collapse
I was just helping someone else going back to shock. The information is here:
https://forum.xda-developers.com/ve...esetting-to-complete-stock-currently-t3892107
You need the XDA members user name. Then use search and find any post by that member. Click on the members avatar ( circle/picture next to their user name ), click the 3 dots at top right corner, click PM and write the member a message.
cssr said:
I was just helping someone else going back to shock. The information is here:
https://forum.xda-developers.com/ve...esetting-to-complete-stock-currently-t3892107
You need the XDA members user name. Then use search and find any post by that member. Click on the members avatar ( circle/picture next to their user name ), click the 3 dots at top right corner, click PM and write the member a message.
Click to expand...
Click to collapse
Thanks for your help Zachary. Update: Used your links and have phone back to stock 5.0, still 3G only signal. I called Verizon tech support and 1st person has you go through the basics and has sent a referral for a real tech, i am waiting for a call back. I let the phone perform updates, did hard reset and wipe still 3G. Let me know if you have any ideas while i am waiting for Verizon , thanks again for your help.
dmcccrae said:
Thanks for your help Zachary. Update: Used your links and have phone back to stock 5.0, still 3G only signal. I called Verizon tech support and 1st person has you go through the basics and has sent a referral for a real tech, i am waiting for a call back. I let the phone perform updates, did hard reset and wipe still 3G. Let me know if you have any ideas while i am waiting for Verizon , thanks again for your help.
Click to expand...
Click to collapse
My name is actually Mike. I live on the edge of a small city named Zachary. Good luck with your phone.
Thanks for your help Mike!
Well i am down to hardware issue, Verizon is telling me there is an issue with the 4G antenna and it is a different than the 3G antenna.
Does anybody know if this is true and if so where is the 4G antenna? I know there is an antenna cable between 2 contacts inside, does it handle
both signals? Thanks again for all your help and time.

Categories

Resources