Working Root SM-G530AZ 5.1.1??
Does anyone know how to root 5.1.1 on SM-G530AZ (Cricket)? Kingroot works, but after reboot, system is locked with unauthorized software flashed screen. Then a system restore with Kies 3 is required. I did manage to use kingroot and get it to reboot just fine but I don't understand what I did exactly. Then I used Flashify (dumb mistake) and on reboot back to restoring...Any Help would be amazing, need foldermount to work. Thanks
wally86 said:
Does anyone know how to root 5.1.1 on SM-G530AZ (Cricket)? Kingroot works, but after reboot, system is locked with unauthorized software flashed screen. Then a system restore with Kies 3 is required. I did manage to use kingroot and get it to reboot just fine but I don't understand what I did exactly. Then I used Flashify (dumb mistake) and on reboot back to restoring...Any Help would be amazing, need foldermount to work. Thanks
Click to expand...
Click to collapse
+1
SM-G530AZ 4.4.4 firmware file
I found the odin files for 4.4.4, but they wouldn't work to downgrade as far as I can tell, but if they help someone get a downgrade, awesome.
Link (fix spaces)
http : // www . mediafire . com /download/wmcc4mxt5auavju/G530AZTUU1AOC1_AIO1AOC1.zip
wally86 said:
I found the odin files for 4.4.4, but they wouldn't work to downgrade as far as I can tell, but if they help someone get a downgrade, awesome.
Link (fix spaces)
http : // www . mediafire . com /download/wmcc4mxt5auavju/G530AZTUU1AOC1_AIO1AOC1.zip
Click to expand...
Click to collapse
What do you mean they don't work? Does it say error when flashing?
Yup I Get FAILED on every file.
Info on phone
Bootloader file = SW REV CHECK FAIL: [aboot]Fused 4 > Binary 1
Pda file = RP VER CHECK FAIL: boot
Phone file = SYS REV CHECK FAIL [K] : No Version
Csc file = SECURE CHECK FAIL: cache
Info on Odin (pda file)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe i'm doing something wrong?
Illyakulinych said:
What do you mean they don't work? Does it say error when flashing?
Click to expand...
Click to collapse
wally86 said:
Yup I Get FAILED on every file.
Info on phone
Bootloader file = SW REV CHECK FAIL: [aboot]Fused 4 > Binary 1
Pda file = RP VER CHECK FAIL: boot
Phone file = SYS REV CHECK FAIL [K] : No Version
Csc file = SECURE CHECK FAIL: cache
Info on Odin (pda file)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe i'm doing something wrong?
Click to expand...
Click to collapse
Ill try it out, Ill tell you how it goes.
---------- Post added at 05:56 AM ---------- Previous post was at 05:47 AM ----------
Illyakulinych said:
Ill try it out, Ill tell you how it goes.
Click to expand...
Click to collapse
How did you get this and what file do I flash?
ok.. I just extracted my 5.1.1 with kies if you want that too.
Illyakulinych said:
Ill try it out, Ill tell you how it goes.
Click to expand...
Click to collapse
wally86 said:
ok.. I just extracted my 5.1.1 with kies if you want that too.
Click to expand...
Click to collapse
I already have the 5.1.1 from my device. But how did you get the 4.4.4 software?
found it on a site call service-gsm.net, had to pay 2 euros for a 24 hour pass to download it.
Illyakulinych said:
I already have the 5.1.1 from my device. But how did you get the 4.4.4 software?
Click to expand...
Click to collapse
wally86 said:
found it on a site call service-gsm.net, had to pay 2 euros for a 24 hour pass to download it.
Click to expand...
Click to collapse
So I tried the files and had same results, I'll try some new stuff tomorrow with the files cuz I have homework to finish. Reply If you find a way. Otherwise Ill have an update for you tomorrow on my progress.
wally86 said:
ok.. I just extracted my 5.1.1 with kies if you want that too.
Click to expand...
Click to collapse
hy can you help me with the 5.1.1 firmware? i can t find it
tnx
danger_gsm said:
hy can you help me with the 5.1.1 firmware? i can t find it
tnx
Click to expand...
Click to collapse
Its an over the air update, so you either update with kies 3 or go into the about device section in setting and then into Software update, from there you would upgrade it.
Possible Root Action
Found a post about SRSRoot working on SM-G530AZ! Any testers out there to verify? http ://w ww.srsro ot.com Hit the news tab then click download. I download and installed on Win10 installed fine. This my DD so i don,t want to test. Let us all know if you do. Thanks and good luck It was stated that this worked on 5.1.1 and was dated 12\13\2015
ruscully said:
Found a post about SRSRoot working on SM-G530AZ! Any testers out there to verify? http ://w ww.srsro ot.com Hit the news tab then click download. I download and installed on Win10 installed fine. This my DD so i don,t want to test. Let us all know if you do. Thanks and good luck It was stated that this worked on 5.1.1 and was dated 12\13\2015
Click to expand...
Click to collapse
Found it about a week ago. Tested. Says Rooted. Phone restarts. Not rooted. Get error: Getting OffSets.. : error: only position independent executables (PIE) are supported. (False)
Any updates on this?
I have tried everything in the book I could find with no luck. I messaged kingroot team. Got a message back saying they would looking into fixing "flash with unauthorized software" on reboot as soon as possible.
I can re store your SM-G530AZ, back to factory 5.1.1
wally86 said:
I have tried everything in the book I could find with no luck. I messaged kingroot team. Got a message back saying they would looking into fixing "flash with unauthorized software" on reboot as soon as possible.
Click to expand...
Click to collapse
Email me and I will walk u through it. It is simple.
[email protected]
ruscully said:
Found a post about SRSRoot working on SM-G530AZ! Any testers out there to verify? http ://w ww.srsro ot.com Hit the news tab then click download. I download and installed on Win10 installed fine. This my DD so i don,t want to test. Let us all know if you do. Thanks and good luck It was stated that this worked on 5.1.1 and was dated 12\13\2015
Click to expand...
Click to collapse
srs root its a big scam.it doesn't work.i try already.
it will say "root successful" and report that to its web site as permanent root,but once you reboot the phone,srs root didn't do a thing.nothing change,NO ROOT.
srs its just a big joke.
if anyone found a root metod please tell us! help us!
or that firmware to use on odin,that way i can keep trying all roots and re-flasing if fails.
sm-g530az 5.1.1 cricket. grand prime.
if it would help, I still have a grand prime that is still in the 4.4.4 ... it's my daughter's and I told her not to update it. My son updated his and we hate it.
Is there any way I can use the rom from my daughter's into kies and and restore the 4.4.4 to my son's?
The main thing I want is the ability to wifi tether. FoxFi works on KitKat 4.4.4 on my daughter's, and was working on my son's until he accidentally hit the upgrade link.
I then rooted his , thinking I could use open garden or barnacle, but neither of those work, either.
any ideas?
If you can instruct me on how to extract and save the stock 4.4.4 rom from my daughter's phone on kies, I'd be happy to share the file with you all.
thanks in advance
idyviva...
there's no way you can downgrade from 5.1.1 to 4.4.4. you are stock on lollipop until 6.0. its available. i do belive it will be available for this is a new device.
Related
This has been a long day...
I previously rooted my N900V Note 3 using the Root_de_la_Vega method. Everything was fine until last night when I stupidly accepted the OTA update from Verizon. I lost root because I forgot to persist Super User. Without thinking I started to reroot using the original Root_de_la_Vega method. The ODIN attempt failed.
This is the message stream from ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Root_de_la_Vega.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also, on the top of my Note 3 it says SECURE CHECK FAIL : cache
My phone will now only boot into ODIN download screen, and gives me the message: "Firmware upgrade encountered as issue. Please use Software Repair Assistant & try again."
My guess is that I have tried to flash/download a mismatched ROM.
Any suggestions on how to get past the ODIN boot screen and back into normal operation?
Any help would be appreciated, obviously...
Read this thread
http://forum.xda-developers.com/showthread.php?t=2516667
Flash the pit
ANYBODY ELSE ON MJ7 DO NOT TRY FLASHING BACK TO MI9 OR DE LA VEGA OR THIS IS WHAT HAPPENS.
NeoMagus said:
Read this thread
http://forum.xda-developers.com/showthread.php?t=2516667
Flash the pit
ANYBODY ELSE ON MJ7 DO NOT TRY FLASHING BACK TO MI9 OR DE LA VEGA OR THIS IS WHAT HAPPENS.
Click to expand...
Click to collapse
How/where do I find the PIT file?
http://forum.xda-developers.com/showthread.php?t=2483380
NeoMagus said:
http://forum.xda-developers.com/showthread.php?t=2483380
Click to expand...
Click to collapse
Freak man, thank you so much.
So if I wanted to get root back, I would flash the VRUBMJ7 file, and then go through the de la vega method again?
cmubigguy said:
Freak man, thank you so much.
So if I wanted to get root back, I would flash the VRUBMJ7 file, and then go through the de la vega method again?
Click to expand...
Click to collapse
NO, using the old software with new update will just brick your phone again... Dont do it.
The only root method once on the new update is not condoned by XDA at the moment but if you do some searching youre sure to find it
NeoMagus said:
NO, using the old software with new update will just brick your phone again... Dont do it.
The only root method once on the new update is not condoned by XDA at the moment but if you do some searching youre sure to find it
Click to expand...
Click to collapse
I guess I'll just wait for a safe way to root post-OTA. I can live with no root for a while. Thanks for helping out, I shot you some cash for your time and not making me feel like a complete idiot.
I rooted after OTA with something that rhymes with bingo. Had no problems.
Sent from my Galaxy Note 3
goldy253 said:
I rooted after OTA with something that rhymes with bingo. Had no problems.
Sent from my Galaxy Note
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
goldy253 said:
I rooted after OTA with something that rhymes with bingo. Had no problems.
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
I just tried what rhymes with bingo, and it didn't work. It's likely because I just took the OTA straight away without using Kies or unrooting through SU. What was your unroot/re-root method?
I did a full unroot before doing and used it. When it was done it had said it failed (not supported), but supersu had actually been installed and was in the app drawer. Used it to get safestrap installed then flashed the good supersu binary from chainfire's site to get rid of the bad one
NeoMagus said:
I did a full unroot before doing and used it. When it was done it had said it failed (not supported), but supersu had actually been installed and was in the app drawer. Used it to get safestrap installed then flashed the good supersu binary from chainfire's site to get rid of the bad one
Click to expand...
Click to collapse
When I try to flash the updated SuperSU files, I get a "Failed to verify whole file signature" error and it aborts. Thoughts?
cmubigguy said:
When I try to flash the updated SuperSU files, I get a "Failed to verify whole file signature" error and it aborts. Thoughts?
Click to expand...
Click to collapse
Do you have the newest safestrap apk?
http://forum.xda-developers.com/showthread.php?t=2517610
it went thru without an issue for me might be worth posting in that thread
NeoMagus said:
Do you have the newest safestrap apk?
http://forum.xda-developers.com/showthread.php?t=2517610
it went thru without an issue for me might be worth posting in that thread
Click to expand...
Click to collapse
Do now. It turns out I needed to reboot my laptop after I installed Kango.
I'm back rooted!
I wasn't previously rooted. I took the OTA then rooted with bingo. Then installed safe strap with no problems.
Sent from my Galaxy Note 3
NeoMagus said:
Read this thread
http://forum.xda-developers.com/showthread.php?t=2516667
Flash the pit
ANYBODY ELSE ON MJ7 DO NOT TRY FLASHING BACK TO MI9 OR DE LA VEGA OR THIS IS WHAT HAPPENS.
Click to expand...
Click to collapse
This worked for me, I flashed the pit for MJ7 and was able to get out of soft brick
Had the same issue, resolved with .pit solution above. Can we include a note in the N900V Root de la Vega instructions? IE: If you have update to Baseband version N900VRUBMJ7, attempting to flash through Odin will fail on cache writing.
I had the exact same problem as OP. Tried to follow steps, kind of got lost.
So, I was able to unbrick the phone using Odin with VZW_32gb.pit. It boots up fine now, I'm still on MJ7. No root. So, how do you get your root back from this point? I can't use safestrap since no root. Kingo doesn't work either -- if my phone is fully booted, it can't connect to it; if I'm in vol-down/home/power mode, Kingo tries, but fails.
kalagula said:
I had the exact same problem as OP. Tried to follow steps, kind of got lost.
So, I was able to unbrick the phone using Odin with VZW_32gb.pit. It boots up fine now, I'm still on MJ7. No root. So, how do you get your root back from this point? I can't use safestrap since no root. Kingo doesn't work either -- if my phone is fully booted, it can't connect to it; if I'm in vol-down/home/power mode, Kingo tries, but fails.
Click to expand...
Click to collapse
After you install Kango, don't enter the download mode, just boot the phone as normal and make sure USB debugging is on. Attach the phone to Kango, and it will download and install the necessary drivers. Once those are done, you can attempt to root, but it likely won't take. Restart your computer, and then reattach the phone. Try to root method again, and it should work. That's what worked for me.
cmubigguy said:
Try to root method again, and it should work.
Click to expand...
Click to collapse
Yeah, mine just sits there for a while, after which it says "ROOT failed! NotSupport". Bummer!
Edit: after 5 tries, it worked. Still got the ROOT failed error, but I did get root! Thanks for your help.
I got my S4 these days. I have flashed XXUAME2 with Odin, rooted the phone, tried MIUI, but was not satisfied. So I restored the backup. Everything was working fina till I installed Adaway and rebooted the phone. Suddenly the wifi was not working anymore. I clicked on the wifi-witch to activate WiFi - no result. Then I rolled back the backup, installed the I9505_XXUEMJ5_MODEM, installed even the "fix". But the wifi still does not work.
Now I just want to have a normal S4 with the original rom, rooted - and working wifi.
What should I do?
Thanks a lot in advance! :highfive:
nalitox said:
I got my S4 these days. I have flashed XXUAME2 with Odin, rooted the phone, tried MIUI, but was not satisfied. So I restored the backup. Everything was working fina till I installed Adaway and rebooted the phone. Suddenly the wifi was not working anymore. I clicked on the wifi-witch to activate WiFi - no result. Then I rolled back the backup, installed the I9505_XXUEMJ5_MODEM, installed even the "fix". But the wifi still does not work.
Now I just want to have a normal S4 with the original rom, rooted - and working wifi.
What should I do?
Thanks a lot in advance! :highfive:
Click to expand...
Click to collapse
Hello mate please download this file and flash it via odin by selecting phone, and Remember to turn it off your phone manually before flashing any modem,If the problem still persist please tell me if your in old bootloader or the new bootloader and will be happy to assist you have a nice day.
To check your bootloader go to download mode and if you have an entry of Knox warranty void then you are having the new bootloader.
If you are having the old bootloader XXUB flash http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar file with odin by selecting phone.
If you are having the new bootloader XXUD flash http://www.mediafire.com/download/zriv6i5c01lqns6/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.rar file with odin by selecting phone.
First, wow, thanks for that fast reply, dude! Ok, I have 0x1, that means, I have to flash the file for the new bootloader, right?
Is there anywhere a mirror? I am in China right now and mediafire is blocked.
Cheers :highfive:
nalitox said:
First, wow, thanks for that fast reply, dude! Ok, I have 0x1, that means, I have to flash the file for the new bootloader, right?
Is there anywhere a mirror? I am in China right now and mediafire is blocked.
Cheers :highfive:
Click to expand...
Click to collapse
Sorry for any delay sir , here's another link inorder for you to download it https://dl.dropboxusercontent.com/u/17236295/MKF_modems_GSM_LTE.tar.md5.zip Credit goes to phil.o for uploading the file , and make sure to thank him here http://forum.xda-developers.com/showthread.php?p=48095149#post48095149as well, have a nice day sir
Alright, thanks. That was a quick download, thanks.
What I did:
1. turned off the phone, removed battery, inserted battery again
2. booted into the download mode
3. flashed the file with odin:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MKF_modems_GSM_LTE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The problem is still there. I cannot turn the Wifi-switch to "ON".
What is causing this problem and what can I do?
nalitox said:
Alright, thanks. That was a quick download, thanks.
What I did:
1. turned off the phone, removed battery, inserted battery again
2. booted into the download mode
3. flashed the file with odin:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MKF_modems_GSM_LTE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The problem is still there. I cannot turn the Wifi-switch to "ON".
What is causing this problem and what can I do?
Click to expand...
Click to collapse
What rom are you using sir? and what kind of recovery do you have? Flash a different kernel. Or do a clean wipe
---------- Post added at 04:00 PM ---------- Previous post was at 03:53 PM ----------
Repulsa said:
What rom are you using sir? and what kind of recovery do you have? Flash a different kernel. Or do a clean wipe
Click to expand...
Click to collapse
Edit: if flashing a different kernel thats not work then I think the only way to fix this would be to flash a complete official stock firmware which you can get it from here http://www.sammobile.com/firmwares/2/ or if you want a pre-rooted you can follow the instruction here.http://forum.xda-developers.com/showthread.php?t=2250824 have a nice day sir and merry christmas to you.
Cool, I saw your edit post. Thanks, dude.
What Firmware should I choose? The phone was bought in Germany from BASE. BASE is using the E-Plus network. But the phone is not branded nor carrier-locked. Should I choose the E-Plus Firmware?
Plus. How to install the Firmware? Just use Odin3 to flash it?
nalitox said:
I prefer a clean wipe. How to do that? Where can I obtain the files?
Click to expand...
Click to collapse
if you want a stock rom from samsung you can go from here http://www.sammobile.com/firmwares/2/ and if you want a pre-rooted rom you can go from here as well http://forum.xda-developers.com/showthread.php?t=2250824 Have a nice day.
Remember to follow any instruction before flashing. you have to flash the firmware via odin and select pda. And flash away. And sorry that i cannot assist you for now because ill be having a dinner with my family and hoping someone will help you to fix this problem if the problem still persist after flashing the stock firmware. Merry christmas to you n your family . And xda community
Ok, understood, thanks.:good:
I want to get a pre-rooted ROM. What version should I pick? I want to have Android 4.3 and (if possible) de-bloated. My Knox is 0x1 and I don't really care about Knox or Knox-related features.
The list here http://forum.xda-developers.com/showthread.php?t=2250824 is very long and complicated. I read through it two times and am not sure what ROM to download.
Can anyone assist, please?
Merry Christmas everyone! :highfive:
nalitox said:
Ok, understood, thanks.:good:
I want to get a pre-rooted ROM. What version should I pick? I want to have Android 4.3 and (if possible) de-bloated. My Knox is 0x1 and I don't really care about Knox or Knox-related features.
The list here http://forum.xda-developers.com/showthread.php?t=2250824 is very long and complicated. I read through it two times and am not sure what ROM to download.
Can anyone assist, please?
Merry Christmas everyone! :highfive:
Click to expand...
Click to collapse
1. Latest version android 4.3 MKE pre-rooted -> HERE
2. For de-bloat it -> HERE
Alright, I have installed this pre rooted version. Wifi works again, thanks.
One annoying issue: everytime I restart the phone, I have to activate Wifi again and re-enter the password.
Edit: Another very annoying issue: I believe that screen is not being dimmed correctly. It is always to dark, even in a very bright enviroment. Plus: the LEDs of both hardware keys are always on when the screen is on.
I just want to have the normal Samsung Stock rooted.
What am I doing wrong?
nalitox said:
Alright, I have installed this pre rooted version. Wifi works again, thanks.
One annoying issue: everytime I restart the phone, I have to activate Wifi again and re-enter the password.
Edit: Another very annoying issue: I believe that screen is not being dimmed correctly. It is always to dark, even in a very bright enviroment. Plus: the LEDs of both hardware keys are always on when the screen is on.
I just want to have the normal Samsung Stock rooted.
What am I doing wrong?
Click to expand...
Click to collapse
If you installed the pre-rooted rom and your having a problem do a factory reset bro phone settings> accounts > backup and reset >Factory reset . Or turnb off your device manually and wait a few sec hold power+volume up the same time and do it there as well, Make sure to use the odin 3.09 when your flashing ..ODIN has problems with flashing latest FW's and if WiFi doesn't work you MUST flash ROM again
Repulsa said:
.ODIN has problems with flashing latest FW's and if WiFi doesn't work you MUST flash ROM again
Click to expand...
Click to collapse
Does this mean that I have to re-flash a new ROM via the recovery?
nalitox said:
Does this mean that I have to re-flash a new ROM via the recovery?
Click to expand...
Click to collapse
No If you download the pre-rooted rom you need to flash it via odin , just like how you flash the stock rom have a nice day.
Edit: if you see a .tar inside of the file means you need to flash it via odin
Understood. Alright, since I don't want to lose all my apps and settings, I decided to flash the Wifi-Fix: XXUEMKE WiFi_FIX
I used Odin to flash this tar.
Unfortunately the Wifi has still the same issue like in the beggining.
Is there an option to flash the wifi fix in the recovery?
nalitox said:
Understood. Alright, since I don't want to lose all my apps and settings, I decided to flash the Wifi-Fix: XXUEMKE WiFi_FIX
I used Odin to flash this tar.
Unfortunately the Wifi has still the same issue like in the beggining.
Is there an option to flash the wifi fix in the recovery?
Click to expand...
Click to collapse
The question is, did u even extract the file you download ? And no you can only flash it via odin and select phone/cp
Sent from my Phone.
Hey, thanks for your help, mate!
Yap, I have extracted the file and flashed the *.tar via odin. Still no result.
Alright, to sum it up. The fix does not work for me. Why? Should I try to flash another Modem?
edit: I really want to have the phone working now. I dont care about other modifications, I just want to have the basic OS rooted. That is all. How to do this?
nalitox said:
Hey, thanks for your help, mate!
Yap, I have extracted the file and flashed the *.tar via odin. Still no result.
Alright, to sum it up. The fix does not work for me. Why? Should I try to flash another Modem?
Click to expand...
Click to collapse
If i have this problem right now,the best thing i will do is either to flash pre-rooted rom or the stock rom if there is any Fc and such . Just turn of your phone the wait a few sec and hold power+volume up in order to reach recovery and do a wipe cache and a factory reset . Hehe
Edit:you already did flash the pre rooted that joku gave u right? Reflash it and follow the step above
Sent from my Phone.
Ok, thanks.
There are no FC at all, just the wifi is the problem.
However, I will flash I9505XXUAME2_MODEM, apply the fix and hope that it will work.
Should I flash modem with odin via "PDA" oder via "PHONE"?
Another question: If I download a pre-rooted ROM and flash it via the recovery, will the new modem be included in the ROM?
Thanks again, mate.
Edit: http://d-h.st/users/DjeMBeY/?fld_id=16262#files
There is no fix for the UAME2. That sucks.
nalitox said:
Ok, thanks.
There are no FC at all, just the wifi is the problem.
However, I will flash I9505XXUAME2_MODEM, apply the fix and hope that it will work.
Should I flash modem with odin via "PDA" oder via "PHONE"?
Another question: If I download a pre-rooted ROM and flash it via the recovery, will the new modem be included in the ROM?
Thanks again, mate.
Click to expand...
Click to collapse
Download odin 3.09 its better to use it with s4.
If your gonna flash the modem always use PHONE/CP. If your flashing pre-rooted rom from djembey or samsung stock firmware always use PDA. And if you download custom rom such as omega,phoenix,golden,etc.etc then you flash that via recovery using either CWM, philz or twrp.
Edit try emj5 wifi fix if not just do a fresh install
Sent from my Phone.
can someone help me how to root n9005 lollipop version and how to install CWM to lollipop n9005? thanks....
Use Odin. pda.
kenny1991 said:
Use Odin. pda.
Click to expand...
Click to collapse
Can you please elaborate? I am a noob to the note 3 root on Lollipop. on the new Odin there is no PDA option, is there a newer up too date thread somewhere of how to do this please?
---------- Post added at 09:07 PM ---------- Previous post was at 08:36 PM ----------
Nico231995 said:
can someone help me how to root n9005 lollipop version and how to install CWM to lollipop n9005? thanks....
Click to expand...
Click to collapse
Did you get yours rooted? I need help getting mine done.
DevilsArc said:
Can you please elaborate? I am a noob to the note 3 root on Lollipop. on the new Odin there is no PDA option, is there a newer up too date thread somewhere of how to do this please?
---------- Post added at 09:07 PM ---------- Previous post was at 08:36 PM ----------
Did you get yours rooted? I need help getting mine done.
Click to expand...
Click to collapse
on laster Odin (V3.09 or v3.10)
PDA is AP
download the laster TWRP or phliztouch link for TWRP: http://www.techerrata.com/file/twrp2/hlte/openrecovery-twrp-2.8.3.0-hlte-4.4.img.tar
place in AP on odin and flash
And download the zip flashable by chanfire and flash on recovery http://download.chainfire.eu/644/SuperSU/BETA-SuperSU-v2.42.zip
done
And my phone is not the root
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
ZeoN1907 said:
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
Click to expand...
Click to collapse
I have flashing TWRP 2 times, it's work very well (odin 3.09)
I'm on GBNL8 too
Bruno saa said:
I have flashing TWRP 2 times, it's work very well (odin 3.09)
I'm on GBNL8 too
Click to expand...
Click to collapse
I'm so tired I'm sorry.
I wonder?
The email address you download Odin,
Can I get the address or the address you're TWRP version and download version or download supers? If possible?
You send them to a compressed file or via email?
I tried many ways but I'm having trouble.
My English is not good. Forgive me. Please.
Port USB
ZeoN1907 said:
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
Click to expand...
Click to collapse
Hi,
I had the same problem and same message for a long time.
And one day i tried to do that with another usb port. It WORKED ! simple as that
Cheers
HI, when I try to install new firmware on my galaxy j5 with odin with pda and file pit for repartition, I got this errors:
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010>
<ID:0/010>Re-Partition operazioni failed.
<OSM>All threads completed. (succeed 0 / fail 1)
Please, help me.
Seconded. Does anyone have a solution for this issue?
@Vincenzolt98 @Dionisis89
It's a custom PIT or stock one? From where you downloaded stock ROM?
When I flashed stock ROM I only had to put it at PDA ( AP for newer Odin versions). I think the repartition should be done automatically when is flashed stock ROM.
Try latest Odin version and also make sure that the PIT file is the correct one (can be for 8gb, 16gb for example).
I recommend you to use SamFirm program for downloading stock ROMs faster.
SamFirm: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 . Even if it's deprecated, it still works fine. The program is attached at attachments in that thread.
#Henkate said:
@Vincenzolt98 @Dionisis89
It's a custom PIT or stock one? From where you downloaded stock ROM?
When I flashed stock ROM I only had to put it at PDA ( AP for newer Odin versions). I think the repartition should be done automatically when is flashed stock ROM.
Try latest Odin version and also make sure that the PIT file is the correct one (can be for 8gb, 16gb for example).
I recommend you to use SamFirm program for downloading stock ROMs faster.
SamFirm: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 . Even if it's deprecated, it still works fine. The program is attached at attachments in that thread.
Click to expand...
Click to collapse
It should be the stock PIT. I don't remember where I downloaded it from but it appears to be the correct one. I don't know where the problem is.
The firmware corresponding to my J500FN's CSC is Austrian (ATO), so I downloaded it from that updato site.
The reason I went to find the PIT file in the first place is because flashing stock ROM via Odin failed. It showed this code (last 2 lines):
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
It had failed at this point, and I've tried flashing the 6.0.1 and 5.1.1 stock image, to no avail. Perhaps you have a solution for that instead?
Dionisis89 said:
It should be the stock PIT. I don't remember where I downloaded it from but it appears to be the correct one. I don't know where the problem is.
The firmware corresponding to my J500FN's CSC is Austrian (ATO), so I downloaded it from that updato site.
The reason I went to find the PIT file in the first place is because flashing stock ROM via Odin failed. It showed this code (last 2 lines):
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
It had failed at this point, and I've tried flashing the 6.0.1 and 5.1.1 stock image, to no avail. Perhaps you have a solution for that instead?
Click to expand...
Click to collapse
Regsrding hidden.img.ext4 error, try this: https://www.youtube.com/watch?v=2uTHilnRsWw. Credits to @pacower for sharing that video. Also try to use newer Odin version (I used 3.09 or so all the time though).
People confirmed that this video works, but here is a post/tip regarding that video: http://forum.xda-developers.com/showpost.php?p=69673728&postcount=10 .
#Henkate said:
Regsrding hidden.img.ext4 error, try this: https://www.youtube.com/watch?v=2uTHilnRsWw. Credits to @pacower for sharing that video. Also try to use newer Odin version (I used 3.09 or so all the time though).
People confirmed that this video works, but here is a post/tip regarding that video: http://forum.xda-developers.com/showpost.php?p=69673728&postcount=10 .
Click to expand...
Click to collapse
I've tried this method, but Odin shows me another error: MD5 error! binary is invalid .
And yes, I've tried removing the .md5 from the file name, but then Odin is stuck on file analysis forever. That happens on Odin v3.12. At version 3.11, it simply hangs after choosing that file. At version 3.09 (which also has the option of flashing a PIT file) it shows this:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea of what I could do? Maybe the PIT file I used isn't correct, after all? Where should I download it from?
---------- Post added at 01:43 PM ---------- Previous post was at 01:28 PM ----------
Hey bro, found the issue. Apparently the firmware I downloaded wasn't right and that's why it never went through with booting the hidden.img.ext4. The link you provided, however, made it happen! You saved my phone. Thanks a million!
Dionisis89 said:
I've tried this method, but Odin shows me another error: MD5 error! binary is invalid .
And yes, I've tried removing the .md5 from the file name, but then Odin is stuck on file analysis forever. That happens on Odin v3.12. At version 3.11, it simply hangs after choosing that file. At version 3.09 (which also has the option of flashing a PIT file) it shows this:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea of what I could do? Maybe the PIT file I used isn't correct, after all? Where should I download it from?
---------- Post added at 01:43 PM ---------- Previous post was at 01:28 PM ----------
Hey bro, found the issue. Apparently the firmware I downloaded wasn't right and that's why it never went through with booting the hidden.img.ext4. The link you provided, however, made it happen! You saved my phone. Thanks a million!
Click to expand...
Click to collapse
Did you try to flash it without PIT file?
Also, if you flashed TWRP before, then try to flash TWRP, then boot in TWRP recovery and wipe /system, /data, /cache and dalvik-cache. Then power off the phone, boot in download mode and try to flash again through Odin.
If you didn't flash TWRP before and you don't wanna lose warranty, then boot in stock recovery and wipe, but your internal memory will be wiped too.
I never used a PIT file when I flashed stock ROM.
EDIT:
Dionisis89 said:
Hey bro, found the issue. Apparently the firmware I downloaded wasn't right and that's why it never went through with booting the hidden.img.ext4. The link you provided, however, made it happen! You saved my phone. Thanks a million!
Click to expand...
Click to collapse
Oh. Nice
I'm glad I helped you.
#Henkate said:
Did you try to flash it without PIT file?
Also, if you flashed TWRP before, then try to flash TWRP, then boot in TWRP recovery and wipe /system, /data, /cache and dalvik-cache. Then power off the phone, boot in download mode and try to flash again through Odin.
If you didn't flash TWRP before and you don't wanna lose warranty, then boot in stock recovery and wipe, but your internal memory will be wiped too.
I never used a PIT file when I flashed stock ROM.
EDIT:
Oh. Nice
I'm glad I helped you.
Click to expand...
Click to collapse
I'm sorry I didn't try flashing the firmware you provided me with in the first place, thereby "making you" type more on an answer that has been answered (by my flashing the correct firmware). There is something else you might help me with, if you have the time. Why did you provide me with a link to the German firmware? I told you it had Austrian CSC. And yet the German firmware was the one that actually worked. How so? And something else. Which is the website that you sent that firmware from? You edited your post soon after you had posted the link.
Dionisis89 said:
I'm sorry I didn't try flashing the firmware you provided me with in the first place, thereby "making you" type more on an answer that has been answered (by my flashing the correct firmware). There is something else you might help me with, if you have the time. Why did you provide me with a link to the German firmware? I told you it had Austrian CSC. And yet the German firmware was the one that actually worked. How so? And something else. Which is the website that you sent that firmware from? You edited your post soon after you had posted the link.
Click to expand...
Click to collapse
Huh? I only gave you links with the YouTube video and SamFirm.
Oh wait, I think that maybe SamFirm downloaded latest available update. In SamFirm you can switch to manual mode and type there the region, PDA and CSC and you can download the firmware which you want.
#Henkate said:
Huh? I only gave you links with the YouTube video and SamFirm.
Oh wait, I think that maybe SamFirm downloaded latest available update. In SamFirm you can switch to manual mode and type there the region, PDA and CSC and you can download the firmware which you want.
Click to expand...
Click to collapse
I didn't use SamFirm to download the firmware file, of that I'm sure. Mostly because upon attempting, I failed. I had put SM-J500FN in model name and ATO in CSC, but SamFirm found nothing.
I think you had a link from Mediafire in your response to me and that's how I downloaded the firmware. Hell, I might be mistaken, since I searched through a ton of threads, including some at XDA, in order to find a solution. It's possible I saw the link at another user's post.
In any case, thank you very much, once again. You saved my phone from becoming a paperweight.
Dionisis89 said:
I didn't use SamFirm to download the firmware file, of that I'm sure. Mostly because upon attempting, I failed. I had put SM-J500FN in model name and ATO in CSC, but SamFirm found nothing.
I think you had a link from Mediafire in your response to me and that's how I downloaded the firmware. Hell, I might be mistaken, since I searched through a ton of threads, including some at XDA, in order to find a solution. It's possible I saw the link at another user's post.
In any case, thank you very much, once again. You saved my phone from becoming a paperweight.
Click to expand...
Click to collapse
Is this the link you talk about? http://www.mediafire.com/download/skldahurz12dick/DBT-J500FNXXU1AOI1-20151006173751.zip . If yes, it's the German stock ROM I've uploaded andmentioned it in my ROM thread at installation instructions I posted it only there. It's kinda old firmware, but always worked fine for me, didn't have any issues (it's the firmware which my phone came with).
You welcome! I'm glad I helped you!
Maybe the OP (first post) has same problem like you. He'll have to read
#Henkate said:
Is this the link you talk about? http://www.mediafire.com/download/skldahurz12dick/DBT-J500FNXXU1AOI1-20151006173751.zip . If yes, it's the German stock ROM I've uploaded andmentioned it in my ROM thread at installation instructions I posted it only there. It's kinda old firmware, but always worked fine for me, didn't have any issues (it's the firmware which my phone came with).
You welcome! I'm glad I helped you!
Maybe the OP (first post) has same problem like you. He'll have to read
Click to expand...
Click to collapse
Yes, yes, that's the one!
I doubt he still has the problem though, since the thread was created at the end of August. Nonetheless, other people who might face the same issue will be able to read this thread and extract useful information.
Hi, so i'd like to upgrade my AT&T GS7 G930A to the latest available version of android that's released, as i'm still on the nougat beta update from earlier this year that wasn't officially released(meaning i'm still only at security update's from january 2017), however, none of the odin files i've tried have worked (links will be below) it keeps getting stuck at "Initializing" and on my phone it keeps saying "Odin Protocol version error", so i was hoping you guys would be able to help me
https://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168 (was going to OTA update after downgrading)
https://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-g930aucu4bqd4-5-18-2017-t3608909
and https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-android-n-offical-odin-package-t3567801
the version currently installed on my phone is G930AUCU4BQA4
You need to go completely back to stock in order to get back on nougat latest I suggest that you flash back to the pk1 marshmallow 6.0 and use the odin provided by Sam mobile
logoster said:
Hi, so i'd like to upgrade my AT&T GS7 G930A to the latest available version of android that's released, as i'm still on the nougat beta update from earlier this year that wasn't officially released(meaning i'm still only at security update's from january 2017), however, none of the odin files i've tried have worked (links will be below) it keeps getting stuck at "Initializing" and on my phone it keeps saying "Odin Protocol version error", so i was hoping you guys would be able to help me
https://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168 (was going to OTA update after downgrading)
https://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-g930aucu4bqd4-5-18-2017-t3608909
and https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-android-n-offical-odin-package-t3567801
the version currently installed on my phone is G930AUCU4BQA4
Click to expand...
Click to collapse
Just flash this firmware using Odin3_v3.12_PrinceComsy
muniz_ri said:
Just flash this firmware using Odin3_v3.12_PrinceComsy
Click to expand...
Click to collapse
Nope, now i get
Code:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
tlopez1973 said:
You need to go completely back to stock in order to get back on nougat latest I suggest that you flash back to the pk1 marshmallow 6.0 and use the odin provided by Sam mobile
Click to expand...
Click to collapse
how would i go about finding these files? as you can see by one of the links in my post, i already tried the PK1 firmware from here
From what I learned it always ends up being an Odin problem not going back just try different versions of Odin make sure your restart your phone when putting it in download mode
logoster said:
Nope, now i get
Code:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try just flashing the CSC file with that Odin version. It contains the .pit file to format your partitions. If that works you should then be able to flash all 4 files.
muniz_ri said:
Try just flashing the CSC file with that Odin version. It contains the .pit file to format your partitions. If that works you should then be able to flash all 4 files.
Click to expand...
Click to collapse
nope, same error, <ID:0/004> FAIL! Model dismatch fail
logoster said:
nope, same error, <ID:0/004> FAIL! Model dismatch fail
Click to expand...
Click to collapse
Try the reverse for kicks and giggles meaning try all other files except CSC.
muniz_ri said:
Try the reverse for kicks and giggles meaning try all other files except CSC.
Click to expand...
Click to collapse
<ID:0/004> FAIL! Model dismatch fail
tlopez1973 said:
From what I learned it always ends up being an Odin problem not going back just try different versions of Odin make sure your restart your phone when putting it in download mode
Click to expand...
Click to collapse
so do you have any links to both the PK1 files and odin that you know work? because i still have this problem, and everything i've tried just keeps giving me the same errors, either that odin protocol mismatch, or the model dismatch failure (and you also said try sammobile odin? i can't find it, and their website seems to insist that the G930A doesn't exist)
Sorry for bumping, but I'd really like to fix this