Hi all! First of Thanks all devs for all of your work (never got oppertunity to give thx)! Have been downloading custom rom's from here since S4^^. (I hope I'm in the right forum sub group)
My goal has been to be able to use a custom rom with viper mod, and root to be working with the gear vr without the lag issue.
Ok, so I have been trying different custom rom/kernel mixes for a while now only flashed stuff from my variant (928F) Forum threads. But I have allways have to reflash pure stock to get the Gear VR working without the lag.
I've tried to mix Skyhigh kernel with CRISSCROSS ROM V1.4 [928F/C/G/I][5.1.1][11.12.15][XXU2AOKB][Aroma], Deodexed STOCK ROM 928 F-I-C-L-K-S-G Edge+ [AOK4][3/12/15].
Audax Rom with Audax Kernel and also just rooted stock. Obviously i have been googling, and almost everywhere I didnt find a solution for it.
But in this thread it is stated that the [KERNEL] Stock Modified Kernel | TouchWiz | Auto-Root + Busybox | 11.18.2015 for the T variant and that it is also working for the 928F variant (awesome!!!). However to the question: While on the 928F variant what custom-roms can I use with the Modified kernel by jovy23 (928t) ? Will it be custom roms from the 928F forums or the custom roms from the 928T forums *confused* ? What particular custom roms running smooth and working can anyone recommend one or a few ?
answers would be nice and many thx to this forum and its devs!
I think it is early in the game ...might change tomorrow. And thank you to the devs and Merry Christmas.
Man, i wish i saw this thread before flashed to a custom rom,
nobody mentions the lag issue! (not on reddit or oculus forum)...
hopefully you can resolve this problem, but back to stock for me.
Hey! I got it to work on my 928F
Root, Viper Audio and Gear VR (without lag)
1st I flashed arter97-recovery (through ODIN)
2nd I flashed Kos Rom v3.0 RC4 by kossiewossie in recovery (F Variant)
3rd I flashed [KERNEL] Stock Modified Kernel by jovy23 (T Variant)
..I did full wipe, davik, cache (I dont know if it was necessary)
Now it run flawless, Root, Viper Audio working and Gear VR without the lag
Merry Christmas and A Happy new year XDA :victory:
vargh said:
Hey! I got it to work on my 928F
Root, Viper Audio and Gear VR (without lag)
1st I flashed arter97-recovery (through ODIN)
2nd I flashed Kos Rom v3.0 RC4 by kossiewossie in recovery (F Variant)
3rd I flashed [KERNEL] Stock Modified Kernel by jovy23 (T Variant)
..I did full wipe, davik, cache (I dont know if it was necessary)
Now it run flawless, Root, Viper Audio working and Gear VR without the lag
Merry Christmas and A Happy new year XDA :victory:
Click to expand...
Click to collapse
Thank you thank you thank you.. That did it for me. I was going crazy on this. Tried everything. I almost gave up on it.
But I did exactly what you did and it works like a charm.
Getting rid of the motion sickness now ?
Happy Holidays everybody. Best Christmas present ever
Sent from my SM-G928F using Tapatalk
Can confirm that Criss Cross Rom by asc1977 works too. Only thing is that you have to flash Gear VR zip seperatly through recovery. :good:
Probarly as stated in another thread here on XDA the Gear VR "App" lag is a kernel issue. I think since the Modified Kernel by jovy23 is close to stock it works. So maybe all Custom Rom(928F) will work with Gear VR if you flash jovy23's kernel.
Awesome Work Devs for flashaholics like me xD
I think since the Modified Kernel by jovy23 is close to stock it works. So maybe all Custom Rom(928F) will work with Gear VR if you flash jovy23's kernel.
Click to expand...
Click to collapse
That is true.
I had Kos Rom v3.0 RC8 with Sky kernel and the Gear VR was terrible. (except for the Google cardboard apps)
I removed the Sky kernel App (SYNAPSE) and flashed the "[KERNEL] Stock Modified Kernel" over the Sky kernel in TWRP. (no wipe of anything)
Now it works like a charm.
Thanks!
Does it works for a S6 edge plus?
Have a doubt guys if I do the same will it work for me?
its a s6 edge plus model: SM-G928A
vargh said:
Can confirm that Criss Cross Rom by asc1977 works too. Only thing is that you have to flash Gear VR zip seperatly through recovery. :good:
Probarly as stated in another thread here on XDA the Gear VR "App" lag is a kernel issue. I think since the Modified Kernel by jovy23 is close to stock it works. So maybe all Custom Rom(928F) will work with Gear VR if you flash jovy23's kernel.
Awesome Work Devs for flashaholics like me xD
Click to expand...
Click to collapse
What Gear VR zip?
/CK
Did you ever figure out what the Gear VR zip is?
Im on marshmallow with sky high... but my note 5 does not detect charger when plug in to VR... please help
if you like , you can try audax m 11
this rom more stable ,smooth
Related
Q&A for [KERNEL][INTL][TW-AOSP 4.4][10/07/2014] KT-SGS5 - NG2 - KTweaker
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hello,
One single stupid question from a user in Germany. As custom recovery i use the twrp 2801 on my S5 (900f), is it maybe better to use TWRP Recovery by Ktoonsez on my mobil phone? Plz help a noob, thx.
Marcel.
awesome
thank you so much working great on 900w8
Can someone help me getting ni4 download on sm-g900p? Sprint S5
@ktoonsez What are the advantages of F2FS?? Would you recommend converting the Alliance ROM to it, or just AOSP ROMs??
SM-G900F
Alliance ROM: Blackout|TechSplat Mode
ALLIANCE.ALLIEZ..ALWAYZ...ALL WAYZ....
KT Kernel OC'd
Hi there. I just installed the new kernel but after install it keeps booting into download mode. I cannot boot normally and is the same when I installed the newest recovery too.
n01z said:
@ktoonsez What are the advantages of F2FS?? Would you recommend converting the Alliance ROM to it, or just AOSP ROMs??
SM-G900F
Alliance ROM: Blackout|TechSplat Mode
ALLIANCE.ALLIEZ..ALWAYZ...ALL WAYZ....
KT Kernel OC'd
Click to expand...
Click to collapse
I was wondering the same thing. I found this...
http://forum.xda-developers.com/showthread.php?t=2697069
Learned a few things from it.
No infrared after latest update 07/10 - G900F
Hi,
I found my Samsung Remote App(s) - various - do not function since the last update and 7th October. I had to revert to 09.21.2014 TW version where functionality is restored.
This is with Alliance ROM 5.5 if it makes a diff.
Thanks
C.
I can't make calls
my rom ( CM 12 alpha bulid 8 )
It's stay in " Calling "
If i hang up .. again it's stay in " Haniging up "
some screenshots
Will tap to wake keep the phone from getting to deep sleep and cause a bit of battery drain?
Hi, will the AOSP lollipop kernel work with Albinoman887's CM12 rom? I am on SM-G900P
Thanks!!
SGS G900F reboots 4.4.2
Hi,
I have random reboots on KT-SGS5 kernel on Alliance Rom 5.6 I use latest relase and previous 9.21.2014 and still I have reboots. I don't know what I do wrong? Soory for my english
I have this reboots too.
You can do nothing.
Take The Adam kernel this is for me The best for The alliace rom.
Is there coming a Kernel for The Stock Rom 5.0?
I am using Alliance ROM with this kernel, the version from 21.09 and never had a reboot. Check your voltage settings
Blocked at starting apps with the last AOSP (not touchwiz) kt kernel on the last build of CM12 (01-02-15)
remzawi said:
Blocked at starting apps with the last AOSP (not touchwiz) kt kernel on the last build of CM12 (01-02-15)
Click to expand...
Click to collapse
this one worked for me
http://forum.xda-developers.com/showpost.php?p=57703118&postcount=2362
awsome kernel been waiting to flash lollipop on g900f for ur kernel flashed this morning awsooooome
If I get this Kernel for my sm-g900i and flash official CM12 for klte would that solve issues with bluetooth / nfc?
Also which one would I download?
[ROM] ViSiON-X [INTL][Android L 5.0] WiFI
Nvm
Double Tap 2 wake and other things
Hi all,
I recently purchased an SAMSUNG galaxy s5 (snapdragon) and installed KT kernel just to get double tap to wake. Everything worked fine with the installation except one thing...there are many options in KTweaker related to how to sleep or wake your phone but none of them works at all.
I donna what's the purpose of specifying those tweakes if they don't work??? And you, Ktoonsez are saying this will drain S5-s battery in comparison to LG G3??? Are you kiddin''....SUPERAMOLED doesn't drain battery so i think this is just an excuse as you're not able to implement this on S5 too as you already did on S4....shame it!!!
Q&A for [KERNEL] [SM-G900F] [CM12/CM11] Boeffla-Kernel 1.0-beta1 (23-03-2015)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [SM-G900F] [CM12/CM11] Boeffla-Kernel 1.0-beta1 (23-03-2015). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Many thanks to our Lord for his hard work in last weeks.
Now it is a "real" S5 ))
Sound control?
The Boeffla control app v. 2.1.73 only offers volume adjustments in the Boeffla-Sound section. I tried running the Boeffla Sound Control App v. 1.7.1 from the market as well as a presumably modified version I found on XDA, but both force close immediately. Is there a way to take more advantage of the Boeffla-Sound options on this kernel (2.0-beta3-CM 12.1)?
Issue with CPU and GPU frequencies
Hello...
I have a Samsung Galaxy S5 and i have installed CM12 with the latest kernel 1.0 beta3 and i experience freezes and hot reboots...
I have not overclocked anything as you can see from the pictures and i have left all frequency clock settings at default values, but when i go to CPU-Z i see the values of CPU and GPU overclocked...
In the attached images i have the default settings in Boeffla for CPU on 2457MHz and in GPU at 578MHz and in CPU-Z i see that max CPU frequency is 2.84GHz and GPU is 657MHz...
Why is this happening?
Thank you in advance for your help...
AnDrEaS
Issue with CPU and GPU frequencies
It is being answered by Lord Boeffla...
All is normal. Tools like cpu-z and others always display the maximum possible frequency, regardless of what you cap the frequency to.
So, it just shows something not correct.
You can verify that very easily by using tools like CPU Spy etc and you will see, these high frequencies are indeed not used unless you allow it.
The reasons is: These tools always assume, when overclocking frequencies are available, they are used. Which is not the case by default in my kernel.
nameless rom KLTE 4.4.4
does it work on namelessrom nightly with stock kernel?
edit- will overclocking freeze my phone? i tried ktoonsez's kernel and it froze my phone. i had to reflash /system and rom, thankfully i kept all my data.
---------- Post added at 09:10 PM ---------- Previous post was at 08:57 PM ----------
i would like a list of working roms (4.4x) that work on this kernel. ty
Hi! Thanks in advance. Im having problems with the kernel. Im using resurrection rom and this kernel, and Im suffering a battery draining specially when I put the phone off and I go to sleep or something. I can be sleeping for example 6 hours, and later having around 10% battery less. Im using Greenify, Google Services disabled, but somehow I can not have a real deep sleep when Im gone.
Excuse my english. And thanks again.
help me please
Hello and thanks for a great kernel . I have a big problem : the afternoon I tried to convert the partition data and cache to f2fs but i failed . I tried to return to ext4 and seems to have gone quite perfect . Now I can install rom and gapps but not the kernel ( because bootloop ) can you help me ? I'm desperate
p.s: sorry for my bad english
phoenix rom and boeffla 12x
Hi,
coming from phoenix rom. tried lolli stock kernel which wory fine. tried 12x kernel which do fail to boot from the very beginning. any idea why?
stefan
Flashed the latest beta kernel, reboots after booting and doesn't stop.
Thanks for your work...
Hello Boeffla,
i use your kernels since S3 and i was so happy when i read, that you also support the S5....
I'm very happy with the kernel and i never had problems with the kernel at all (using smoove, interacitve, conservative)!
I really appreciate when you further support the S5 development!
regards Oliver
it wiil work on 5.1 android blisspop v3.5?
Suhaimi.adi9 said:
it wiil work on 5.1 android blisspop v3.5?
Click to expand...
Click to collapse
I tried this kernel (2.1-beta8) on BlissPop v3.6 (BlissPop-v3.6-klte-OFFICIAL-20150701-2254), but some features didn't work (ex: couldn't use tethering).
IMPORTANT: BlissPop is "customized" rom, so you must read and understand when want to use:
Lord Boeffla said:
*** Note, I only test the kernels against official CM12 and CM11 by CM team, not any "customized" roms. If it does not run for you on other roms, do not expect support by me as this is impossible ***
Click to expand...
Click to collapse
Sm 900m
Kernel working with s5 SM-900m?
I would like to test this kernel with Exodus ROM 5.1.1 (http://forum.xda-developers.com/galaxy-s5/orig-development/rom-team-exodus-klte-t3135876). Is it compatible? If yes, how do I know what version of the kernel to take (CM11, CM12, CM12.1, Stock Lollipop 5.0)?
Thanks.
Problems with bluetooth on g900t
I have a g900t with cyanogenmod 12.1 installed. Whenever I try to pair my sony speakers to my phone the speakers do not work properly. So my question is, can I installed this kernel on my g900t? would this fix the bluetooth problem?
Thanks in advance.
Hi, I am new to this. Just got my S5 today.
The phone still got Android 5.0 with TouchWiz on it (original Samsung firmware) and is not rooted yet. I want to install CM 12.1 later. What kind of kernel do I need now? If I install the kernel via Odin is my phone then rooted and ready to install CM 12.1?
Thanks for any help.
Sebi80 said:
Hi, I am new to this. Just got my S5 today.
The phone still got Android 5.0 with TouchWiz on it (original Samsung firmware) and is not rooted yet. I want to install CM 12.1 later. What kind of kernel do I need now? If I install the kernel via Odin is my phone then rooted and ready to install CM 12.1?
Thanks for any help.
Click to expand...
Click to collapse
You need a tar of a recovery. Twrp..http://forum.xda-developers.com/showthread.php?t=2727406
[RECOVERY][klte] TWRP 2.8.7.0 touch recovery [2015-06-23] or others. But i would spend some time looking up the way to go on help threads.. If you need help finding them shout me....
Dont rush. Take time to read up...
Sent from my klte using Tapatalk
I installed Boeffla Kernel and CM12.1 successfully. All works fine. However, my phone always says that I have no root rights. Boeffla Kernel for sure is installed and is showing up in my settings. What can be wrong?
Sebi80 said:
I installed Boeffla Kernel and CM12.1 successfully. All works fine. However, my phone always says that I have no root rights. Boeffla Kernel for sure is installed and is showing up in my settings. What can be wrong?
Click to expand...
Click to collapse
You have to enable root, or to flash SuperSU (a third party, actually the most popular root solution for Android.).
I would actually like to recommend you the stock CyanogenMod root, but I myself am using SuperSU for a while, and I would have to search how to use the stock CM root with 12.1.
So either install SuperSU app from the play store, and download this zip: download.chainfire.eu/supersu, boot to recovery and flash it, to enable Chainfire's closed source root, or Google 'How to enable root on CyanogenMod 12.1' to find out how to use CyanogenMod's own root solution.
Edit:
So I dont have to type everything (instructions how to enable CyanogenMod's own root implementation, IIRC, and if nothing has changed in the meantime, it is Koush's implementation, which is open source:
http://www.gammerson.com/2015/07/how-to-enable-root-acces-in-cyanogenmod.html?m=1
Sent from my SM-G900F using Tapatalk
hello take a while xda forum and the truth is that it has helped me a lot earlier with S IV and now with the note IV .
I have a problem and that the note 4 are no longer suits me as before, lag, some applications crash ... .
I got installed a custom kernel and custom rom i would like to know if it's possible to go back to official kernel and official rom.
I know how to do to roll back to official rom but with the kernel i search a bit and dind't found the kernel.
I know that 's a tall order but appreciate it if someone could lend a hand and tell me I have to do.
Thanks in advance and follow so that this community helps a lot to people who are not expert in android.
Are you sure that flashing official firmware is the right decision? Loosing root and all the good things that come with it?
Lags and all that sh^@+ happens.. but I'll tell you somenting: it happens even more with official firmwares..
What I suggest you is to flash another custom rom (one of the latest) and see how it goes.
Anyway, answering to your question about the kernel: flashing an official rom you'll flash the official kernel too.
_mone said:
Are you sure that flashing official firmware is the right decision? Loosing root and all the good things that come with it?
Lags and all that sh^@+ happens.. but I'll tell you somenting: it happens even more with official firmwares..
What I suggest you is to flash another custom rom (one of the latest) and see how it goes.
Anyway, answering to your question about the kernel: flashing an official rom you'll flash the official kernel too.
Click to expand...
Click to collapse
Ty for the answer i flashed a rom that got in pc a long ago was the 4.4 and upgraded via ota. I know that i lost all i already rooted again but
i'm ****ed now with the SElinux, i can't change it even with the busybox and the prompt, also tried the app of xda the last version and fail also :S
Dunno what to do can u tellme the best rom and kernel at the moment? in the past i tried the n4 ael kernel and the emotion nightly r13.
Only want to change the selinux to permisive and if can to up a little the headphone output vol. :good:
alexplaza1 said:
Ty for the answer i flashed a rom that got in pc a long ago was the 4.4 and upgraded via ota. I know that i lost all i already rooted again but
i'm ****ed now with the SElinux, i can't change it even with the busybox and the prompt, also tried the app of xda the last version and fail also :S
Dunno what to do can u tellme the best rom and kernel at the moment? in the past i tried the n4 ael kernel and the emotion nightly r13.
Only want to change the selinux to permisive and if can to up a little the headphone output vol. :good:
Click to expand...
Click to collapse
Here is The Link of Pure Samsung Base Lollipop For SM-N910F But Remember to Update Bootloader & Modem According To ROM....
Above link Also Have Deodexed Rom(All things are Stock just Deodexed To work with Xposed & Selinux Status)
To Change the Selinux Status Use SELinux Mode Changer...
If you are Changing Selinux Status For Viper4Android Here You go Official ViPER4Android Audio Effects...
If you are on TW than Viper4Android on stock kernel
Regards your Headphone Volume you can Give A try To Poweramp Music Player if you Don't want To go Through all this Stuff...
You Can also try AOSP Roms Like Official Cm12.1 for 910F and 910G Even in Nightlies it's Stable Enough To Perform As Daily Driver (Xposed ,V4Android all will work)...
TechLife said:
Here is The Link of Pure Samsung Base Lollipop For SM-N910F But Remember to Update Bootloader & Modem According To ROM....
Above link Also Have Deodexed Rom(All things are Stock just Deodexed To work with Xposed & Selinux Status)
To Change the Selinux Status Use SELinux Mode Changer...
If you are Changing Selinux Status For Viper4Android Here You go Official ViPER4Android Audio Effects...
If you are on TW than Viper4Android on stock kernel
Regards your Headphone Volume you can Give A try To Poweramp Music Player if you Don't want To go Through all this Stuff...
You Can also try AOSP Roms Like Official Cm12.1 for 910F and 910G Even in Nightlies it's Stable Enough To Perform As Daily Driver (Xposed ,V4Android all will work)...
Click to expand...
Click to collapse
wow many thanks bro, now I'm looking at whether the official 5.0.1 rom + root can change the SELinux to permissive but not really find anything
with Samsung knox if you can not get to do. I went throught the app selinux mode changer that u let me here but nothing happens. :S
I'll apreciate any help to do that
alexplaza1 said:
wow many thanks bro, now I'm looking at whether the official 5.0.1 rom + root can change the SELinux to permissive but not really find anything
with Samsung knox if you can not get to do. I went throught the app selinux mode changer that u let me here but nothing happens. :S
I'll apreciate any help to do that
Click to expand...
Click to collapse
Bro Flash the Deodexed Rom its All Stock Just Some Changes To Support the Stuff That Stock Kernel Not permitted...like Removal of Knox,Init.d Support...etc
Here is Deodexed Lollipop For SM-N910F & Flash this Bootloader & Modem(Please Flash Bootloader & Modem in Odin Accordingly The Rom,like if you Flash BOD2 Rom Choose Appropriate Bootloader or Modem)...
For Selinux Changing You Need Also init.d Support...Here is Init.d Support without need of use Custom Kernel Or This Init.d Enabler (No custom kernel) + Busybox Installer Choose Any one of Them...
I hope It'll solve your issue
TechLife said:
Bro Flash the Deodexed Rom its All Stock Just Some Changes To Support the Stuff That Stock Kernel Not permitted...like Removal of Knox,Init.d Support...etc
Here is Deodexed Lollipop For SM-N910F & Flash this Bootloader & Modem(Please Flash Bootloader & Modem in Odin Accordingly The Rom,like if you Flash BOD2 Rom Choose Appropriate Bootloader or Modem)...
For Selinux Changing You Need Also init.d Support...Here is Init.d Support without need of use Custom Kernel Or This Init.d Enabler (No custom kernel) + Busybox Installer Choose Any one of Them...
I hope It'll solve your issue
Click to expand...
Click to collapse
many thanks bro i flashed a deodexed rom coz i tryed in the past busybox and worked
I have two s7 edges, one stock rom which works fine and this one - which was stock rom until last night. I rooted and installed KINGROM and everything is lovely, all except now my gear vr won't recognize when it's attached so won't install any software.
I wanted to post in the kingrom forum, but I don't have enough posts to do so, so I have to ask here.
Does anyone know why the headset isn't triggering the install? I can confirm it worked when on stock rom, and the KINGROM page claims that the vr is fully supported.
Australian stock, Optus carrier.
Many thanks
You gotta fix all those formatting on your post dude.
I dont have THAT specific rom but maybe it has an aroma installer where it gives you the option to enable it? The superman rom i had that, i selected it and my gear vr works perfectly.
Toldorn said:
I have two s7 edges, one stock rom which works fine and this one - which was stock rom until last night. I rooted and installed KINGROM and everything is lovely, all except now my gear vr won't recognize when it's attached so won't install any software.
I wanted to post in the kingrom forum, but I don't have enough posts to do so, so I have to ask here.
Does anyone know why the headset isn't triggering the install? I can confirm it worked when on stock rom, and the KINGROM page claims that the vr is fully supported.
Australian stock, Optus carrier.
Many thanks
Click to expand...
Click to collapse
Most ROM Makers remove apps that your MAJORITY dont use, VR could be one of them.
You may need to add it in yourself, Or it could be a option when installing.
If you have two phones, then check for the APK in system, and if its there, see if its present in your ROM where VR does not work.
bigpapa007 said:
You gotta fix all those formatting on your post dude.
I dont have THAT specific rom but maybe it has an aroma installer where it gives you the option to enable it? The superman rom i had that, i selected it and my gear vr works perfectly.
Click to expand...
Click to collapse
nice to know superman rom works with VR... im already on that ROM and im planning to buy a VR instead of buying a google cardboard knockoff (aka the chinese vr boxes)...
@Toldorn
i use kingrom and vr is working flawlessly
in aroma when you flash it it gives option to remove apps you don't want and I'm sure you removed gear vr apps required to work
reflash it and don't remove anything.dont select any app in 3rd and 4th pages in aroma
- tapatalked - from my VANTABLACK S7 EDGE
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
good point mate ... Maybe I'm going to give other CRs of that a Try ... have you tried that with other Custom ROMs like AOSP ones or others ?
Yes, I did. In the past I could get a KitKat Rom from our big brother P900 running on my device using the same method as I used here.
wulkanat said:
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
Click to expand...
Click to collapse
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
raneym305 said:
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
Click to expand...
Click to collapse
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376
hitman1376 said:
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
raneym305 said:
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
Click to expand...
Click to collapse
Well , if you just want to play around , you can try out the stock Lollipop with my Prime Kernel and get better Performance and Battery or even CM13 / CM14 ... about the aroma , you can disable the device verification ... also I guess you can force the TW MM boot with Lollipop Kernel like it boots CM13 and CM14 ( I don't mean booting without any problems and also don't forget T-805's MM Kernels !! ) the Biggest problem is that we don't have a MM Bootloader which is the biggest problem ... anyway , this device is still so powerful to play newest games and OSs ... It's not fair to abandon it :laugh: ... You know ? I had a very busy day and I have been awake since around 6 AM when I woke for salat till now which is 12:41 AM :crying: !! so , My brain doesn't have any more juice and I need to get some sleep ... I hope you like my kernel ( esp. In case you'd like to test it out :laugh: ) ... I Updated it just some minutes ago
With Best Wishes
Hitman1376