Question on updating BlissPop Custom ROM - Galaxy Tab 4 Q&A, Help & Troubleshooting

Hey everyone,
BlissPop recently notified me of an updated version and so I used its integrated function to download and install it. After clicking the install-button the system was rebooted to recovery mode (TWRP) and left me standing there.
I've got following questions I hope I'll get answers on:
Do I have to repeat the flashing-procedure (like when originally flashing BlissPop the first time) in order to update it?
And wouldn't all my data be lost then?
Please excuse me for asking on such relatively basic topic for this place. :/ I am pretty inexperienced concerning Custom ROMs and would really appreciate help or much rather guidance with this, if possible. The board's search feature didn't bring up any but that might as well be because english is not my native tongue.
Anyways, I really hope someone can help me. Thanks in advance.
Yours
Tattva

Related

EVERYONE PLEASE Read This before helping or asking for help !!!

EVERYONE PLEASE Read This before helping !!!
Let me start by saying I'm guilty also.
Giving help is expected here on XDA and is very much appreciated.
We are giving help and causing worse problems than the OP began with!
When asking for help please give enough information about your unit and your problem to receive a proper response.
When helping if proper info is not given then begin by asking for enough to give proper answer. Do not suggest flashing anything without proper information!
There may be other things that should be in this list (if so tell me and I'll add them).
What device – TF300T, TF300TG, etc.
What bootloader – ICS or JB. If ever on JB you are JB(this should change in the future).
What recovery did you use, not just CWM or TWRP but which version ICS or JB or by version number.
What rom did you begin with before trouble, stock or custom XXX and which one not just HYDRO, etc.
What did you flash? CWM or TWRP is not enough information. Which version by number or ICS, JB.
We have to start considering the bootloader in every question and answer!!
Because Xxxxxxx flashed this and fixed his device is not enough to blindly suggest the poster do the same.
A large percent of the problems being reported are from flashing the incorrect thing for the unit and or the bootloader and we are blindly suggesting the same thing instead of obtaining enough facts and giving an answer that will help the OP instead of hurt the OP.
We Must Stop!
Thanks for taking the time to read my rant!
tobdaryl
tobdaryl said:
What device – FT300T, FT300TG, etc.
Click to expand...
Click to collapse
What device – TF300T, TF300TG, etc.
Good Catch! Thanks.:good:

i9100G - Root + CM10 install help. Firmware confusion!!

Hello People,
Let me begin by stating that I am very very new to Android rooting and custom roms (actually, this is my first time ).
I have a SGS2 i9100G. I have attached the screenshot of my phone software details. I have searched on the internet and XDA but am unable to find or maybe understand how to root my device and install CyanogenMod 10 (JB 4.1). Whenever I reach a post which seems like the way to root my device, it talks about firmwares and modems which are different than what my phone has.
I would be very very greatful if someone can sort this for me and provide some links and steps on how can I successfully root my phone and install CM10 (JB 4.1). Thanks a lot already as I know people will start replying in no time
Cheers
Sorry. I think I posted this question in the wrong forum. Please delete it. I am posting it in Q&A.
Sorry, Again. :angel:

[samsung i857(doubletime)]ROM devlopers and users of this phone

HI all , i lunched this thread after weeks of googling and usless search for a new stock or custom rom to update my phone (samsung sgh-i857 doubletime) it's a dual screen phone with querty built-in keyboard it's from at&t and it is stuck on android 2.2.2, i'm very sad that they and after years from lunching it didn't back it up with a single soft update -_- ... and i know that there are users who bought this phone like me and seek help.. i know that it's not this easy but if you are a devloper help us by creating a custom rom for it ....if you are a user of this phone please support this thread by commenting so we can get an update for it :good: ps: i attached informations for it's cpu
Hello good sir, I like you am a noobish Doubletime user who is struggling to update it to Gingerbread. So far I have been somewhat able to use the Cyanogenmod source code and I have built a CWM Recovery for the device but that seems to have hard bricked it... I ordered a new one off ebay for $15 and I'm ready to start cooking. You have my support!
Just an update.
I have a plan I have on how to get this runnin.
1. Port CWM to the DoubleTime through Cyanogemod 6.
2. Get a working version of Cyanogenmod 6 working on the DoubleTime to hopefully free up some space.
3. Find if Gingerbread can run on Froyos kernel.
From there I'll either be building a GingerBread compatable kernel or Cyanogenmod 7 depending on compatability. Any advice or help would be very appreciated.
Being new to ROM building I'm a little lost and hesitant on flashing things but here's what I know so far.
The DoubleTime uses a Qualcomm MSM7230 same as the HTC Vision. I forked it's Github respiratory and I'll be using it as a base as recommended by the Cyanogenmod porting guide.
The partitions sizes (as a accurately as I can estimate them) are:
/cache=21.05MB
/data=176.65MB
/system=194.38MB
I may need to know the recovery partition size but I'm not sure how to find that out.
I have the recovery.img and the boot.img as well as the zImage. So as soon as the repo sync is done I'll be on my way.
I'm back again today with somewhat mixed news, I can find most of the partitions and their names (I've learned a lot today) but I can not seem to find the boot, recovery or ramdisk partitions. I'm already boggled by the what seems to be unconventional naming setup for partitions. Put all of my "notes" in a text docement in the attachments section. Any help with this is very appertiated. I can type and post anything into the ADB shell you need me too.
I'm beginning to feel like I'm talking to myself, I probably am...
Upon reading forum rules and such it has come to my attension that this is the wrong forum for this kind of thread, So I have made a new thread in the Miscellaneous Android Developement Forum that will hopefully be more useful at getting more proffesional and opinionated help.
http://forum.xda-developers.com/showthread.php?t=2651728

I see a pattern emerging - lack of guides

Hello! This will be a quick post about how it was good earlier and how it can be better today, so please, stay with me.
I've been using Sony's for a while now, starting with small and cute Sony Ericsson k510i, then k550i, then wt19i (LWW), and then Xperia SP. My "flashing career" started after I've lost warranty on my k510. At that time there wasn't a lot you can do to your phone - there were several official firmwares, various customization options, and a lot of custom patches. No competition, one latest official firmware, a big library of patches that you could port to your device, if someone didn't do it already. The only competing area were a lot of graphical patches, but you could compile them together on your phone. Like today, if you were doing something wrong with your phone - you'll get a brick and it's your fault. But for every device there was an instruction, a beautifully crafted instruction on what to do and how to do everything, step by step. Almost every thread included a complete set of links to get you started. If you needed to flash a customisation after installing something, there would be a link on how to flash custom right there.
Today I have my XSP and try to do something to it. So I open one link (non-sticky, needed to bookmark it), see a lot of ROMs, part of which are no longer maintained. Finally open one of them based on performance rating, and see that it needs some kernel. So I go to kernel list, and see that it can't be flashed without recovery. What recovery? One specific recovery, because another one can't flash it. Now how do I flash recovery in the first place? I need a manual for that. Now I go to kernel and ROM page and see that no manual is available for them, too. So I open main device page and don't see any manual, so I open a sticky thread. And guess what? I don't see manual there. And that's when I start a new thread, type my problem in, and see a non-sticky thread with last post made 2nd of May 2015, and no pages link to that thread at all.
Is that how it goes this days? A newbie comes in, spends whole evening, opens 10 tabs, and still can't find anything relevant? I think we need to do something with this, revisit old threads, compile a new one-for-all guide, or at least a list of guides. And stick it, so people can actually see it. Otherwise there will be small closed community of those who already can develop and flash, and all the others who either got brick or is afraid to get a brick. Thanks.
---
UPD: And then I see that the kernel which I almost decided to flash is closed and all developers migrated to another one. I'm talking about tangerine and helium. Again, no info in the first post. And main developer openly says to users of his work - if it didn't work for you, don't use it. What's wrong with you people...
I'm deeply sorry if I offended somebody with my previous post. I'm happy that you guys do such amazing things with this 3 year phone. But damn, FULL INSTALLATION took about 10 minutes, counting PC reboot into linuxes to get fastboot working. In case someone struggles like me, use CyanogenMod instruction to get to Cyanogen Recovery; download TWRP Recovery, ROM of choice and GApps of choice; place all three ZIPs onto your sdcard; go to recovery, flash TWRP, reboot into TWRP (by pressing volume rockers while loading), do Wipe - Factory Wipe, flash ROM, flash GApps, reboot to normal. Wait for about 5 minutes (black screen is normal, there will be dots flying after a minute or so to keep you entertained).
Yes, It's that simple nowadays, so why bothering typing so much? I was in that situation with my SP, too, but if the are so many answers to these questions and so many threads... "You have to read" is the answer! A lot! It's for your own good, trust me. Now I can do anything I want with my phone with nohow! So a little reading and searching here and there is just positive experience for you. Don't complain, the people here ( well a part of them) are hardcore coders or themers or whatever. You can't just ask them to tell you all the stuff. If want help I'm always available.
Thank you for linking to my very dusty and lonely Flash ROM guide hahaha
No you didn't offend anyone at all. The guides are actually there, like how to use Flashtool, how to unlock bootloader, how to flash recovery and everything, it is just that they are buried deep with time as the development goes. The thread are there, in the General section and are awaiting to be searched. Though some are outdated, some are not and you can benefit from there.
Some searching will normally do, but if it didn't, just ask in the threads, someone will probably answer to you!
I always have my eyes on the General and Q&A subforums of the Xperia SP, and I will usually respond to a help-able problems. So if you have any problems, feel free to post in the Q&A subforum, and if not me, someone will help you. If there are nobody, don't feel offended. Maybe people don't know what to help or suggest (but lets just hope that is not what it will be )
About recovery, PhilZ and CWM is way outdated, and its time for everyone to make TWRP as a standard as it is a still updated recovery. Cyanogen Recovery in my opinion is crap as there are far too less feature plus, it enforce on signed flashable zips.
About the thread on Tangerine, the developer said dont use if it doesn't work is because of the norm of the Kernel. The kernel is made by using an AnyKernel template, hence render support for almost all Lollipop ROMs. Since ROMs can be updated and all ROMs have different sources, a simple change in the system part can render Tangerine unsupported, and the developer cannot do anything (definitely his choice, please respect that) to only fix the problem on one ROM which could possibly break support for the majority of the ROMs! This also appplies to Helium. Therefore, his words of "dont user it if it doesn't work" has a meaning, and it is not something to degrade new users and so.
kojata said:
If want help I'm always available.
Click to expand...
Click to collapse
TechnoSparks said:
I always have my eyes on the General and Q&A subforums of the Xperia SP, and I will usually respond to a help-able problems. So if you have any problems, feel free to post in the Q&A subforum, and if not me, someone will help you. If there are nobody, don't feel offended. Maybe people don't know what to help or suggest (but lets just hope that is not what it will be )
Click to expand...
Click to collapse
Thanks for the answers and offering help, happily I was able to install my ROM of choice and it still works flawlessly, I was even able to squeeze 20 battery days from my old XSP.
Thinking about it, I start to understand why that dev answered like that. I was a python dev in the past and know how one feature can kill two others. Just in my head there is one current linux kernel, and all things that are developed should work with that particular kernel. Kernel comes before OS, if you will. Isn't it the case with ROMs and droid kernels?
About TWRP and reading: I honestly did read a lot of info before doing something, because it's my only phone these days. But it's so hard to find information on whether something is deprecated or not. As a new user, you wouldn't just google "is this deprecated and no longer used?", because that search will not provide any info. That is why during that evening and following morning I lost count of how many times I just shaked my head asking which recovery/kernel should I use and how do I install it? Latest being the easy one, because I already found TechnoSparks thread by that time.
In case anybody is interested, I installed Candy 5 on default kernel. But I still don't know if installing android 5 on a kernel used with android 4.2 was a good idea. It went well, however.

Have a lot of issue with my device, want to start fresh

Thread closed, duplicate post, same post exists in Q&A thread.
Hi, (issues, sorry)
Im sorry for the lack of information but my device is in a really ****ty situation and I just want to start fresh. Could someone please tell me the steps to do if I just want to keep my Unlocked Bootloader and TWRP Recovery, please be very specific and with as many details as possible
.I really dont care about anything else on the device. Im not sure about my android version I think it is 10 with a month or two old version of nitroOS.
I would like to have by the end of it OxygenOS 9.0.10 but the rest, as I said doesn't matter.
Again sorry for the lack of info but I just need a good cleaning running phone.
Thanks

Categories

Resources