Related
So I can't get my desktop OR laptop running XP Pro 32 to even recognize the phone. As in no audio plays and nothing appears in the system tray. Tried with/without debugging mode, installed the samsung drivers etc. The phone doesn't even show up in device manager at all- not even as something unrecognizable. Its as if the port is dead. The phone does 'ding' though and charge ok so it is receiving power... though nothing at all appears in the android notification tab when connected. Any ideas or anyone know of any apps on the pc or android side to take a closer look at whats happening on the bus?
The only way that I can get it to work is to put it in media mode. It shows up as a media device in Win7. If I put it on, "ask every time" or whatever it doesn't work and in mass storage mode it shows up as two unreadable drives, they are grayed out in Explorer... Basically...don't use the "ask every time" for USB function.
This function seems like such a simple thing, not sure why Samsung has so many issues with it considering they have been making media devices for a long time.
Anyway... do you have access to a newer OS to at least rule that out as a cause. Not saying it shouldn't work with XP 32 but just something to check out.
I was having similar issues at first. I take it adb doesn't work either? Well my fix was to delete my whole Android SDK folder, then I redownloaded it (though I just kept the "tools" folder this time). Then I downloaded "USBDeview" (google it) to delete every USB driver that had to do with android (basically just left the printers, HID, and my Sansa drivers), restarted, then I downloaded the samsung drivers from the thread on here, plugged my phone in and manually pointed the driver search to the drivers.
ADB and Mass Storage has been working fine since. All I can tell you is to keep checking cause there's something you're missing, I also thought to myself "what the heck else can I do?" since I had done each one of those steps previously, but maybe I just had to do them all together. Good luck.
another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue
I couldn't get it to work at first either. I more or less did this.
I plugged in my phone. I did not enable mass storage mode on my phone. Walked away and let my PC think for a while. I came back and I noticed I had two new drives. I then enabled mass storage mode and could connect.
Two of my machines I had to do this. I'm not sure why it wasn't instant, but it just took a bit of patience and walking away from the machine to let it think for a while before I guess it installed the drivers and made its peace with the fact it wasn't the G1 any more.
Say into voice dialer "Open SD card" -> check "Enable USB mass storage". That works if port on PC is OK.
If it's a driver issue, open device manager and uninstall the usb ports. Unplug everything from usb and when you reboot the computer it will automatically reinstall the usb ports.
Sent from my Vibrant
I ran into the same issue. It was a problem with the USB cable I was using. As soon as I tried a different cable it worked fine.
larryccf said:
another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue
Click to expand...
Click to collapse
I second this, I forgot my sammy cable at work on Friday and on way home stopped at T-Mo and picked up a charger w/cable and realized right away this was just a charging cable as soon as I connected it to my PC. I'm returning the cable back to T-Mo tonight. At least I was able to charge my phone over the weekend.
UPDATE: You guys are right, it is the goddamn cables! I bought an extra wall charger + cable at the t-mobile store and was using that at home. I had left the original in-box cable at work. Tried the cable at work today and now the drives pop up. Still don't appear writeable but I can look into that when I have time, probably the typical driver issue. As far as I can tell those separate cables are power only! $15 for a two wires + dc adapter. Thanks Samsung. Grr.
i suspect the mfgrs have gone to charge only cables to help keep folks from tethering - just a suspicion
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)
FYI....The Rocketfish cables you get from Best Buy do not work. They are only capable of charging.
@larryccf...I don't think certain manufacturers are implementing this on purpose so we can't tether. I think their just being cheap.
Where I got my cables on the cheap! and my problem.
I got my cable at monoprice.com. Check it out that is a 10 foot usb cable for $1.69 and it works for me. They have different lengths and even some colors. Now my Mass Storage issue . . .
My Mass Storage via USB works fine unless I enable "USB Debugging" which one of my apps needs to work. Once debugging is enabled I loss the ability to see my sd card and internal storage on my XP netbook. any ideas????
Same Problem
I have the exact issue, tried many things have'nt found a fix yet. Any help would be greatly appreciated!!!
Thanks,
crx
larryccf said:
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)
Click to expand...
Click to collapse
this worked for me Thanks
Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx
crxforya said:
Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx
Click to expand...
Click to collapse
This is my issue exactly, and I haven't found a fix either. Called T-Mobile and they thought turning off debugging was the only fix I needed.
Most of them, sorry to say are half retarded. They think a data reset is the cure-all
crxforya said:
Most of them, sorry to say are half retarded. They think a data reset is the cure-all
Click to expand...
Click to collapse
Ain't that the truth!
If you are running windows (x86 or x64), it would be wise to install the samsung drivers. I was having this exact problem, but as soon as I installed the drivers from samsung, viola!
I had the latest drivers from google, and they did not work for me.
Here is a link to the thread containing the links to the drivers, thanks to TGA_Gunnman:
http://forum.xda-developers.com/showthread.php?t=728929
After failing again and again and again, reinstalling the drivers, reinstalling KIES (which simply won't work on my machine), removing the battery etc. etc. etc. I just don't know what there is left to do...
When in Win7, the phone is recognized, although Windows tells me that it's not connected to a USB2 hub. In download mode it says connection failed. What else am I supposed to do?
The phone is not branded or anything, applying stuff though update.zip's was never an issue.
So please somebody help me - I'm stuck with JF3
simple, switch to another computer
unless you can find and easy way to make windows forget the USB bugs
you need to also unplug the PC and wait for the PC to power drain, reconnect the PC power cord, and turn the PC back on.
after it goes back to windows try hooking up the phone again, if you get the message about not running in USB2 mode, then it failed
retry after resetting BIOS settings, installing USB2 drivers, etc.
Sent from my GT-I9000M using XDA App
I had a similar problem...
I had a USB 1.1 Port on my Thinkpad T22 and the drivers didnt like it
Use a different computer/USB port
...btw I still like JF3
Now you will probably feel the urge to smack my head against the wall when you read what I'm about to tell you... I don't blame ya... The cause of the "problem" was that I wasn't using the original Samsung USB cable that came with the phone. I just couldn't find it so I decided to use an aftermarket cable which I had lying around. Big mistake... I finally found the USB cord and that fixed everything for me. Beware of aftermarket accessories as the phone will punish you for using them!
that cable might have been a very poor after market version then
i do use a couple of after market USB to micro USB cable with the phone and it works fine
there are bad aftermarket products
and there are quality aftermarket products
I remember having a few mini USB cable with my old G1, and had similar problem. With one cable it was recognising, with the other one didnt.
Don't know what difference they have, but it's indeed wierd!
I was using a nokia usb cable to flash my samsung
Since upgrading the Galaxy S to 2.2.1 which I absolutely love - must faster than anything previous, sleek, really well done, I've just noticed for the first time that my USB doesn't seem to work.
The computer sometimes sees it but just says the device is malfunctioning, the phone sometimes sees the PC and gives a menu for "ask on connection", but Windows just does not know what this device is at all.
Suspect I may have to reinstall the drivers fully in Windows, remove it completely and try again, if it actually showed up as an unknown device in Device Manager.
I do need to try another PC and cable just in case, but this is what Im having at the moment in Windows:
USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
Click to expand...
Click to collapse
And the Phone is currently not detecting any connection.
Any thoughts?
Cheers
Simon
I would go with a windows problem and remove the usb drivers/Kies .
Followed by fresh install .
jje
You can find a link to the usb drivers in my signature.
I think its a little more problematic.
I've tried another computer, another OS and another cable no joy.
I've installed aLogCat and Im getting:
Intent Action android.intent.action.ACTION_POWER_CONNECTED
Battery charging.plugType = 1
AC Charge
In MtpReceiverandroid.intent.action.ACTION_POWER_CONNECTED
Battery charging.plugType = 1
Not of USB charging. Dont lauch MTP APP
Click to expand...
Click to collapse
I've done a quick search on this. Hopefully this is as simple as doing a factory reset and format the internal sd.
If not, then Im off to a samsung service centre I think.
Any further thoughts?
:-(
Factory reset the phone, but the USB port still is not working. Charges fine, but don't connect over USB to the PC.
Can it be in debugging mode. Try to switch between mass storage and kies.
Probably you have checked that already..
Sent from my GT-I9000 using XDA App
the same problem from me i tried all but the usb is not working at all. I flashed kernel , i flashed rom but nothing .
Now i am looking to install untouched rom in order to give it to service but when i am trying to flash from recovery i get an error . Any suggestions?
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
alumine said:
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
Click to expand...
Click to collapse
I test the usb in all the modes (recovery and download also). I used different computers but the same thing
alumine said:
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
Click to expand...
Click to collapse
Right, I've tried all available USB ports, two different computers, two different OS's. The phone just does not register a USB data connection. It only recognises AC charging according to the logs.
I think I have a broken USB port on the phone as if I jam the connector in at an angle on the phone, it sometimes registers the data connection but its far too unreliable.
Development mode don't work, Kies, Mass Storage etc... anything. Nothing works.
Factory reset doesn't make it work.
I can't even flash a new ROM as the phone is not detected in download mode.
I've got the phone booked in at a Samsung Service Centre now. I've seen a few webpages referencing corrosion. I tell you what though, this phone has been protected way way more than my old N97. I've had so many phones and not one has suffered from "corrosion". So let them just try and say it's my fault. Im ready for em.
sjdean said:
Right, I've tried all available USB ports, two different computers, two different OS's. The phone just does not register a USB data connection. It only recognises AC charging according to the logs.
I think I have a broken USB port on the phone as if I jam the connector in at an angle on the phone, it sometimes registers the data connection but its far too unreliable.
Development mode don't work, Kies, Mass Storage etc... anything. Nothing works.
Factory reset doesn't make it work.
I can't even flash a new ROM as the phone is not detected in download mode.
I've got the phone booked in at a Samsung Service Centre now. I've seen a few webpages referencing corrosion. I tell you what though, this phone has been protected way way more than my old N97. I've had so many phones and not one has suffered from "corrosion". So let them just try and say it's my fault. Im ready for em.
Click to expand...
Click to collapse
Try cleaning your phone usb port. A guy named omersak had the same problem, and he had solved it. Search for the thread started by him, and how he has solved it.
I hope you can solve it without going to the service centre. And good luck.
Sent from my GT-I9000 using XDA App
Definitely trying that first - thank you to all the people that have been doing the investigation.
It sounds to me like Samsung have got a bad batch of USB connectors that should be replaced under a factory recall.
I don't use mine in a shower, or sauna, or anything like that, I don't even use it in the rain.
The closest it gets to any humidity is being in my shirt pocket from time to time.
Im going to get some meths or something like that and some thin paper and see what I can do with that. Im just off to Homebase!
there are similar problems on the galaxy 3 series where usb suddenly stops working. the following solutions seem to work there:
1. dial *#7284# to open "PhoneUtil"
2. in USB section, switch to modem, and then switch back to PDA
if that doesn't work: reboot into recovery and select "wipe cache partition"
*hth*
I've tried both of those before I start splashing the methylated spirit around. Still no joy.
Wipe Cache don't work, as well as wipe data/format sd/restore factory defaults etc.
I think I've got a 100% hardware fault.
@OP,
I am terribly sorry about your case. Looks like you need to make that trip to the service centre.
At least you have tried out every possible means known.
Sent from my GT-I9000 using XDA App
Also tried the meths. No good. :-(
The USB just started working yesterday. Still a bit intermittent, but when it gets a connection, it maintains a connection.
I've just ordered some isopropyl and a gold plated USB connector to be on the safe side
Hi everyone,
To sdjean: maybe you could read the post I sent a few minutes ago:
forum.xda-developers.com/showthread.php?p=12593413#post12593413
It might explain why your usb data connection does not always work ...
Regards.
I have a Samsung GT-I9000B and I cant use it using USB.
I have 2 usb cables, I am able to find my friends phones.
Now I cant change rom cause odin cant find it too.
Alog cat shows:
E/MTPRx ( 4020 ) Battery charging. plugType = 1
E/MTPRx ( 4020 ) Not of USB charging. DOnt launch MTP APP
Any suggestion?
I'm not an Expert but 2 hints from me:
1. If you have'nt tried yet: Install usb-drivers on pc new and then connect your phone and wait until drivers are installed to your phone.
One times this way worked on my i9000.
2. Look for a zipped rom on xda which you can directly download and install from sd-card.
Sorry, I know my English is bad.
Sent from my GT-I9001 using xda premium
I cannot get my epic to mount for ANYTHING! I factory wiped the phone, nope, I used a palm pre usb cable nope, I downloaded the official samsung drivers nope, I plugged the cable into the motherboard on the computer nope, I tried a different computer running windows 7, nope tried a laptop using windows vista, nope. Does anyone know ANY WAY POSSIBLE to get this thing to mount? I selected mass storage and dissabled and enabled usb debugging. Im just not having any luck. It seems that the computer recognizes the phone is connected just cant get to the files on the SD card.
I also spent many hours trying to figure out what the hell was wrong with my Epic, that is, why it would come up as a "malfunction" in Windows when I plugged the USB cable in.
I tried drivers, different restore points, wiping, etc. etc. etc.
To the point... Try a new USB cable. The one packaged with the Epic is junk. As a matter of fact, it worked several times before it crapped out. I have no idea why, but I picked up a new micro USB cable, plugged it in, and the phone was then immediately recognized by my computer to allow mass storage mount.
People who tried the Palm Pre USB cable also had issues for some reason.
IMO, there should be a sticky posted in this board regarding the packaged USB cable, as I encounter this issue quite a bit.
Ok I'll try to find a new one really quick thanks
ugh tried an HTC Mytouch 4g usb cable and that didnt work either. Gonna try a class 4 usb stick and im gonna try puttting all of the files on the computer from the SD card
Edit: Oh wow i cant put the files on the computer duh
Edit: Ok now I'm mad a Class 4 SD card wont connect to the computer thru the epic ughhhh
I'm guessing during this time, you've rebooted the computer a few times? Sometimes, that's all it takes...
Try uninstalling ALL of the USB drivers associated with the Epic, rebooting the computer, then connecting (with debug mode OFF). Windows found and installed the USB drivers for me in just a few seconds when I did this [with the new cable, the first time].
- G
Have u enabled development mode under settings > applications (in your) epic? If not, try that, then plug in cable.
Then pull down the notification bar and it'll give you back the option.. again, if you haven't tried this.
On occasion I have troubles with the Epic mounting/ejecting on a Mac, but the only time I've ever had an issue with it mounting on a PC a different cable solved the problem immediately.
Try a different USB port on your PC. If that doesn't work, try rebooting the PC and the phone.
I had luck with trying different usb ports though
I had this problem as well and:
1. Tried 4 different cables
2. Tried all 4 on all 4 different USB ports
3. Rebooted numerous times
4. Uninstalled/reinstalled drivers
5. Tried 3 different PCs (1 other running 7 and another running Vista)
6. Did 1-4 on all three computers.
OH! and the reason I was so adamant about finding a solution was that I was stuck in Clockwork... due to having messed up an EXT4/RFS/CW2.5/CW3.0 installation... It was MY fault... I screwed up.
The problem was I had been living with the nonmounting problem by simply putting my MicroSD into an adapter and plugging it into my Laptop for file transfers... never expecting to HAVE to ODIN at some time...
Anyway... I ended up coughing up the $100 to Insurance and replacing the phone.
HERE IS MY THEORY: I think what my problem was was that the USB port on the Phone was messed up. I think these USB ports are possibly a hardware fail point and the changing of cables has been a patch on the issue with the port... NOT the cables themselves!
I'm not suggesting that you are there yet since it sounds like you can at least still get the phone to boot up (and aren't stuck in CW) and could still use a work around of putting files on the MicroSD with an adapter...
But I would suggest you don't be as stupid as me and get yourself in a position where ODIN is your only hope.
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
OregonLAN said:
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
Click to expand...
Click to collapse
You don't really think that I sent in a phone that was stuck in CW do you? I don't think that would have worked too well for me.....
Cheers!
Did you end up doing an ODIN restore
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
have you tried put yoy're phone in depurating mode?
I guess yo mean Debugging mode, as I couldn't found Depurating anywhere. Have selected it and the same effect
HI
I had the same problem after getting nowhere with it, for some reason and I don"t know why, I put it in download mode and then connected it to odin and my PC found it I then disconected it and its been fine eversince.
Jim
#Samsung Kies always makes problems on Windows x64 !
##I would recommend, if you got 32-Bit Computer, to use that ;-)
#If you Want just flash over Odin, then is this driver package enough
##[Link]--http://download2us.softpedia.com/dl/85b009d47a0940e89eee2297a531d100/4f577870/300141878/drivers/mobile/SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
#The Package is also enough for If you want just to connect to mass Storage (Phone's SD Card)
Don't Forget to Thanks, if it was useful for you!
_______________________________________________
Hi there.
By direct connection you mean the USB Mass Storage mode, right?
It might be some weird, random problem with the samsung system drivers. I used to have such problems about two years ago, back in the days of Froyo. Have you tried re-installing them? There was a link to proper drivers file in one ICS installation tutorial, and those drivers can be downloaded here. If you go about trying this method, lemme know if it worked.
Cheers.
PS: Unlike diklooc there suggested, do not never EVER go back to x86 OS. That's the worst advice. Kapisch?
Did you check your usb port in System ?
Sometimes it stuck with another lastest device
Hi,
have tried everything, and finally only in a WinXP32 could be abble to get the error shown on the file atached.
But nothing (warnings) come up in Device Manager
Unninstalled everything (kies) and tried to install only the driver and nothing happens.
Should I try to mount it on a linux?
or is it dead?
thanks
i have this problem too
wat chan I do???
my sgs can not connect to my PC
This may help...
Hi there - I don't have the same phone as you, but I did encounter the exact same problem. I've been searching around and it looks like the most common fix was to simply replace the cable. I don't know what kind of cable you have, but my phone (a Samsung Focus i917) uses a mini-usb connector. I found that my Amazon Kindle used the same connector.
When I was using the Samsung cable, I'd get intermittent connects and charge power. The OS would report unknown device. When I switched computer's = same result. I switched to my Kindle cable and the computer instantly recognized the device and installed the drivers. After 12 hours of troubleshooting, factory resetting my phone (blah - lost everything) it turned out to be the cable. I know that this isn't an easy troubleshooting step for most people, because who has an extra cable? I just got lucky that my Kindle uses the same connector. I'm now suspecting (due to the prevalence of this connectivity problem coming from people with Samsung phones - there are a LOT of reported issues) that there is probably a Samsung cable problem in general.
Good luck with your phone.
try
try select mass strong ...
Tips and unlock advice.
nasdriver said:
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
Click to expand...
Click to collapse
Nasdriver, I currently have a similar problem but mine is related with Samsung Kies as I can't get either my older SGS1 or my newer Samsung Nexus to get recognized by Kies. I also suspected the cable thing and even read it could be a USB port issue but neither of them was my problem (I have 3 cables and 8 ports on 2 computers that result in the same thing). I can connect other devices with the same cables and they work, so I suspect my problem is focused around the Samsung device drivers.
My advice is if you can go in a systematic manner, first focus on the cable (easiest to replace), if you get the same results with a new cable, then focus on the USB physical port, clean it with some Isopropyl alcohol, if the port works for other devices (camera, other phones, etc..) on the same cable but not with the SGS, then try reinstalling the samsung device drivers.
Oh, and if you want to unlock your phone, the EASY way is to download the Galaxy S Unlock application from the Android market (no affiliation) it's free (but the developer does accept donations) and it WORKS. I won't bore you with my 3 week journey trying to unlock my Bell SGS phone here in Canada, had I found this app first I would have done it in less then 2 min saved myself a LOT of frustration.
Good luck