Hello,
I'm having a bad issue with my phone. GS4 gt i9506 norwegian version... I have downloaded the I9506XXUBML6 stock firmware and lollipop version for the phone trying to get it working again. DL mode says:
ODIN MODE
Product name: gt-i9506
current binary: Samsung official
system status: official
Knox kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: enable
Rp Swrev: S1, T1, R1, A1, P1
Write protection: enable
UDC START
When in odin and trying to put in firmware it just gets stuck.
Problems started after using auto root.
Most likely you will need more information
Thanks in advance
can you post the log of odin?
also when flashing with odin tar.md5 you need to wait like 3 or 4 minutes depends on your pc in order to start flashing.
Hello again,
I actually fixed the phone already so I will only tell what I did. The log file abruptly ended in the middle transiting data. No error. This led me to believe:
a) error with the file (wrong image?)
b) problem with usb port or cord
B was easier to solve. First went through all the ports on my laptop. All 3 of them. No change. Then changed the cord to a new one(newer). Neither of these worked so I asked my gf to nicely lend her desktop with marvelous 9 usb ports. :angel: Moved files to usb stick (thank you usb3) with odin in it too(so I will know whether it's a or b) Downloaded samsung drivers.
Phone connected. Files moved to D. Odin start. Connection! AP selected. Wait 15 min and come back. Phone is working. OTA lollipop incoming.
Thank you for your quick reply,
Hope this post will help someone else
Don't Panic
Related
Sooo it's about 3 days that I'm having problems with my Samsung Note 4.
The phone is about 6 months old and I tried to root it when I bought it without success, so I put the original firmware again (As after successful (or insuccessful?) rooting the phone keept bootlooping all the time). With a few tricks (that I cant remember) i made it working again.
3 days ago I was charging the phone while browsing on google chrome and the phone suddenly turned off and went in a bootloop. I tried installing the original firmware again (Odin says "PASS!" at the end of the process) but it still wont go work. Tried to wipe cache and data, still nothing. Samsung Kies wont recognize my phone to do an emergency recovery.
Another strange thing is that I can enter in download mode but not in recovery mode.
"ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START"
That's what it says in download mode and have no idea what it means.
Anyone can help? Im about to freak out
Thanks in advance
Anyone?
Still none? Im using my phone as paperweight right now..
alpacino15 said:
Still none? Im using my phone as paperweight right now..
Click to expand...
Click to collapse
Are you using genuine usb cable? it's a must. Also do NOT use USB 3 port
My company issues the Verizon flavor of Galaxy Tab 4 8.0 for our users that are out in the field. It seems like this one particular user (or someone close to them) decided to try and root the device in order to get around the restrictions we have on them via a MDM client. When the tablet boots (even when trying to go into recovery via power+home+volume up) it goes to the triangle screen saying "System software not authorized by Verizon Wireless has been found. Please turn off and go to the nearest Verizon store". But unfortunately the store turned us away saying there's not much they can do. I am able, however, able to get it into download mode.
So far I've tried flashing the Verizon Stock 4.4.4 firmware, which I found searching around here, via Odin 3.10.7. It gives every indication that the process completed and shows the green "PASS" block up top. When the tablet reboots from flashing, it still goes to the triangle screen. Once the triangle screen comes up, upon reboot there's a lock at the bottom of the boot screen and the word "Custom", shown here: http://i.imgur.com/5PC0qeZ.jpg. It seems like maybe the bootloader isn't correctly being overwritten or something. When the tablet is in download mode, it says the following in the top left (after I've already flashed it a few times):
Odin Mode
Product name: SM-T337V
Current Binary: Custom
System Status: Official
Reactivation Lock(KK): Off
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A2, P1
Secure Download: Enable
UDC Start
I'd like to think I'm not a total novice with this stuff, but I'm at a bit of a loss at the moment. Where should I go from here? I've read from a different thread about the note 3 that sometimes you have to flash the .pit file again in order to nuke the partitions, but so far I haven't been able to find one I feel comfortable enough to try.
Hi guys. Like a bunch of other threads around here, my Note 4 (N910F) was pretty much the perfect device until about 4 days ago at which point it started rebooting a lot. At first I suspected an app update to be corrupt or something and the cause of this, so I cleared cache, but no joy. It also then began to hang whilst booting on occasion, so I did a factory reset. No joy. Since then things have gotten worse, occasionally it will boot into recovery mode, sometimes it'll say it's in download mode etc. I've had a screen when it bumped me into Odin Mode that said mmc_read failed. I've had kernel panics where it complained about EXT4-fs throwing errors. Okay, so the internal storage has gone bad, I understand that. It's 22 months old, has a 24 month warranty.
However... as per the thread title, when I get into Odin mode, it says:
Code:
Could not do normal boot.
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Downloading...
Do not turn off target!!
Thing is, I've never rooted this phone. I've never installed anything but OTA firmwares. I've considered it certainly, but there was just no need to like there was in past generations. I've never installed any cracked apps. On the occasions when I can get the phone to boot, and go to Settings > About Device > Status, it tells me that it's official. So why is Odin saying it's Custom? And are Samsung going to refuse a warranty repair because of this? I'm also not entirely clear on what System Status in Odin reflects. Is it meant to be the current firmware, or is it a lifetime counter that says whether it's ever had another firmware on it. The thing that puzzles me is that I got the phone new and I really, really mean it when I say it's always been stock and official. My baseless theory is that if it can't boot, it can't read some blocks so can't properly hash the filesystem, hence saying it's custom. On occasions where it can boot, it can read those blocks and can complete some kind of hash.
I just want to get it fixed, but I suspect I'm not going to get them to fix it under warranty.
Any thoughts?
EDIT:
It just occurred to me that at no point had I deliberately gone into download mode myself, I'd only ever been in it when it couldn't boot. So I tried it. This is what it shows:
Code:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Downloading...
Do not turn off target!!
This kind of backs up my theory that the "system status: custom" bit is coming from it not being able to read blocks on the eMMC when it starts.
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
1.Try doing wipe data before flashing the firmware.
2.Try flashing Stock LP firmware.
3.Try to flash using Heimdall, which doesn't have some restrictions that Odin has.
4.Nand erase all option in odin might help a bit.
5.If none of these works i guess you need to flash the device using Z3x box or jtag. Go ye visit a samsung service and hopefully they manage to fix your problem.
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
Send it to me if you are gonna throw it away
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
have you read this post https://forum.xda-developers.com/galaxy-j5/how-to/how-to-unbrick-galaxy-j5-sm-j500h-t3536287
100% it s something that you can do to fix it .. Just search hard i had problems like this on many phones ( not booting and things like that) and i fixed them after some google .. all i can say is Good Luck mate Ps:don t throw it..
EDIT
My bad didnt read your full post.
I was gonna mention Smart_Switch_PC_Setup
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
JayFivehundred said:
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
Click to expand...
Click to collapse
Send it to me
Can someone help me please. My phone is in ODIN mode, I'm very dumb when it comes to phones and computers, can anyone offer a solution.
ddi: mmc_read failed
ODIN MODE
Product name: SM-G360T1
Current Binary: Samsung official
SystemStatus: custom
FAO Lock: on
Qualcomm secure boot: enable (csb)
AP Sswrev: s1, t1, h1, a1, a1, p1
At first change the battery or buy a new one.
After its not work flash stock firmware
I know this thread is old but i can help you
First of all maybe the battery is so drained it cant read the nand due to lack of energy. Try charging it for a few hours or overnight. If it dosent do anything at all, change the battery. If it still dosent work, go to the next step
If the above method dosent work, Try flashing the stock ROM using Odin.
If it still dosent work, your device is bricked