Database Users

[Guide] [Video] How To Flash and Root Cyanogenmod 12.1 on Moto G [Noob Friendly]

Here's a complete step-by-step guide to Install the NEW Cyanogenmod 12.1 on Motorola Moto G 1st Gen XT1033, XT1032, XT1031, XT1034 and XT1032 GPe Variants.
Backup your phone before following the procedure as you may loose all your data.
Prerequisites for your Moto G :-
1. Unlocked Bootloader
2. Custom Recovery
Prerequisites for your PC (Doesn't work on MAC) :-
1. Motorola Device Manager (Motorola Drivers)
Downloads :-
1. Cyanogenmod 12.1 :- https://download.cyanogenmod.org/?device=falcon
2. GApps 5.1 :- https://www.androidfilehost.com/?fid=96039337900114916
3. Motorola Device Manager (Motorola Drivers) :- http://goo.gl/7GLlMo
Youtube Video :- https://www.youtube.com/watch?v=iOMkKEDad-A
Complete Guide (In case, you didn't Understand something in the Video)
1. First download the two files a) Cyanogenmod 12.1 zip file for Moto G 1st/2nd Gen and b) GApps 5.1 zip file
2.Transfer both the files to your Moto G.
3.Power Off! your phone and boot into bootloader mode by pressing Volume Down Key and Power button simultaneously.
4. Press the Volume Down Button followed by Volume UP button to select Recovery.
5. When in the recovery, follow these steps :-
a) Click WIPE.Then Click on Advanced Wipe and select (i)Dalvik Cache (ii)Data (iii)Cache (iv)System. Now Swipe to Wipe these things.
(DO NOT CHECK INTERNAL STORAGE.IF YOU DO SO, YOU WON"T BE ABLE TO INSTALL ANY ROM.)
(b) Now click on BACK and again click on Arrow key to go back.
(c) Click INSTALL and select CM 12.1 zip file that you downloaded and then SWIPE to flash it.
(d) After it's installed, click on WIPE CACHE/DALVIK and then click on BACK to go back.
(e) Again click INSTALL and this time select GApps 5.1 zip file that you downloaded and then SWIPE to flash it.
After it's installed, click on WIPE CACHE/DALVIK and then click on BACK to go back.
(f) Click on REBOOT SYSTEM and let it reboot.
You have successfully Installed CYANOGENMOD 12.1 on your MOTO G.
That's it..
Enjoy your smooth and fast new LOLLIPOP 5.1.1 with Tons of Customization Features....
"Setup Wizard Has Stopped" FIX :-
1. After the flashing is complete and Moto G boots into the Cyanogenmod 12.1 Welcome screen , just POWER OFF the device.
2. Now remove the sim card/ both the sim cards and Reboot it.
3. Complete the setup wizard normally.
4. When you get into the home screen, insert your sim card/sim cards.
How to Root Cyanogenmod 12.1 on Moto G?
Downloads :-
1. Root (Supersu/Super User) zip file - http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Instructions :-
1. Download the super user(root) zip file and transfer it to your Moto G.
2. Power Off! your phone and boot into bootloader mode by pressing Volume Down Key and Power button simultaneously.
3. Press the Volume Down Button followed by Volume UP button to select Recovery.
4. When in the recovery, Click INSTALL and select supersu(root) zip file that you downloaded and then SWIPE to flash it.
5. Click on REBOOT SYSTEM to reboot your Moto G.
That's it..
Enjoy your smooth and fast new LOLLIPOP 5.1.1 with Tons of Customization Features....

Guides belong in the general section, not the dev section, let alone the original dev section.
Thread moved

Gapps link not working
Sent from my XT1033 using XDA Free mobile app

hi, how to instal on XT1032 GPE 5.1 [bootloader 41.19]?

can anyone help about how to easy root my moto g gen 2 ......with platform tools link
can anyone help about how to easy root my moto g gen 2 ......with platform tools link need it urgently plzzz

I did everything, but when it first initialize the message "Trebuchet has stopped worked" appears over and over again. How can I fix this? My phone is a XT1033.

rogerazambuja said:
I did everything, but when it first initialize the message "Trebuchet has stopped worked" appears over and over again. How can I fix this? My phone is a XT1033.
Click to expand...
Click to collapse
Try installing any custom Launcher using adb.

so for xt1033, no more dual sims function after flash cm12.1?

Umer520 said:
Try installing any custom Launcher using adb.
Click to expand...
Click to collapse
I installed Nova Launcher. Now it is ok! Tks.
naszrudd said:
so for xt1033, no more dual sims function after flash cm12.1?
Click to expand...
Click to collapse
My phone is a XT1033 and it is working both sims.

thx 4 the guide

i installed cwm on my moto g xt1033 but i get only the black screen when i boot in to recovery mode, someone pls help me.

Dual sim
I'm using XT1033. My question is after flashing CM 12.1. Am i use Dual SIM ? or its works only Single SIM ?

I followed your guide for my XT1032, and I'm unable to send or receive MMS. Any idea what the issue is? My carrier is Consumer Cellular.

Sms/MMs Issue
DrumsXO said:
I followed your guide for my XT1032, and I'm unable to send or receive MMS. Any idea what the issue is? My carrier is Consumer Cellular.
Click to expand...
Click to collapse
I've the same issue. It's some package Manager issue. Any 3rd party app also will not be able to send / receive or see sms.
Somebody fix this or provide an solution please. I tried updating as well as downgrading it didn't work.

Help!!!
Somebody Helpppp
nikilpereira said:
I've the same issue. It's some package Manager issue. Any 3rd party app also will not be able to send / receive or see sms.
Somebody fix this or provide an solution please. I tried updating as well as downgrading it didn't work.
Click to expand...
Click to collapse

need help, stuck on patching system image unconditionally
I followed all the steps, I am unlocked and I have TWRP 2.8.6.0 tried flashing nightly and now it's stuck on "Patching system image unconditionally" somebody help ! please

hudtwalcker said:
I followed all the steps, I am unlocked and I have TWRP 2.8.6.0 tried flashing nightly and now it's stuck on "Patching system image unconditionally" somebody help ! please
Click to expand...
Click to collapse
I have the same problem. I read that's it's caused by the gpe edition using ext4 as it's partition format for the Data partition. Does anyone know how to install cyanogen on a gpe edition moto g? I've tried to change my data partition to f2fs, but then I'm not sure of how to transfer the cyanogen zip to it, since I can't boot it up and use adb.
Edit : Well apparently, you can use adb in recovery, but it didn't fix the problem at all.

Facing insane issue
I'm facing weird problem. I followed the procedure and my device is working fine except for audio and video issues.
The issue was
When I plug in headphones for playing video. Video stops you can't play it same goes for audio. If you remove headphones, everything works smoothly. I could take calls without any hassle and with headphones too. To remove this I searched for some info. At forum.xda-developers.com/moto-g/development/xt1033-audio-fix-t2832183 n flashed device. Now audio doesn't work at all. Can anyone guide me ?

Nice video guide! Please make it for CM to.
Gesendet von meinem XT1039 mit Tapatalk

really useful; feedback for CM 12.1.1 Falcon
thanks for this thread, was really helpful.......
I was using stock ROM for my Moto XT1033, OTA stopped at 5.1
Feedback for CM 12.1.1 After 3 days of usage
smooth and fluidic
i love the freedom with new tweaks
increased battery back up
had some issues in network with stock ROM, resolved
has some minor stability issues with 3G network even now, BUT OK
IT WAS DIFFICULT TO FLASH CM RECOVERY, AFTER FLASHING WITH ADT STOCK ROM WAS ALWAYS REPLACING IT WITH STOCK RECOVERY.....TWRP RECOVERY WORKED EXCELLENTLY; HERE IS STEPS I FOLLOWED
Backed up my entire data
Unlocked bootloaders from Motorola website
flashed TWRP recovery With ADT
flashed CM 12.1.1 with twrp

[GUIDE][UPDATED 12/22][TESTED]Fix for VoLTE not working in VoLTE enabled Roms

Ok Guys, enough posts about VoLTE not working in supported Roms too. Some users are constantly flooding threads with VoLTE issues so here is a proper guide to get it working.
UPDATE - 12/23
Note : The old guide failed to work for me when I flashed MIUI and tried to follow the same steps but the guide below worked every single time.
1 - Flash MIUI Global Beta 6.11.3 Fastboot using MiFlash - Link
2 - Setup your phone and make sure you get VoLTE icon. If not, try to reset apn and then reboot and reset apn again.
3- Once you get VoLTE in MIUI, unlock bootloader using MiFlashUnlock.
4 - Flash ZCX Recovery. Don't use any other recovery.
5 - Go to backup and backup your efs partition as well as firmware(rom) partition.
6 - Wipe dalvik, cache, data, system.
7 - Flash any VoLTE enabled rom and gapps. Don't restore anything yet.
8 - Boot your rom and complete setup.
9 - Go to recovery and restore previous backup.
10 - Boot and Voila.
The old Guide:
Note: - Follow the steps exactly as mentioned.
1 - Download the latest fastboot flashable Global Beta MIUI Rom. I used 6.12.8.
2 - Flash the downloaded fastboot Rom using MiFlash.
3 - Let the phone boot and perform setup till you get to the point where it asks for your MI account credentials. (Make sure you see VoLTE in the status bar during setup).
4 - Unlock the bootloader using MiFlashUnlock.
5 - Flash ZCX Recovery. *IMPORTANT*
[Optional Steps] This might be just a placebo but it worked anyhow for me so you can try it.
5.1 - Flash latest Xiaomi EU rom (Beta).
5.2 - Boot your phone and complete the setup.
6 - Backup your EFS using ZCX Recovery.
7 - Wipe Dalvik, System, Data and Cache.
8 - Flash any VoLTE supported Rom and Gapps. I used Resurrection Remix 5.8.0 and OpenGapps Mini. (Do not flash cm14 firmware zip or any other zip like custom kernel or SuperSU yet.)
9 - Let the Rom boot and complete setup.
10 - *VERY IMPORTANT* Just keep your 4g sim inside the phone and that too in 1st Sim slot only. I had Jio 4g and Idea so I removed Idea sim and put Jio 4g in 1st slot. (While removing and inserting sim, you should keep your phone in airplane mode).
11 - Check if you have VoLTE now. If not, then don't worry, proceed to next step.
12 - Reboot to recovery and flash the cm14 firmware. Do not restore the EFS yet.
13 - Reboot to system and check if VoLTE works now. If not, proceed to next step.
14 - Reboot to recovery and restore your EFS backup.
15 - Reboot to system and check if VoLTE works now. It should definitely work now.
16 - Enjoy. Now you can put your 2nd sim back and flash kernels and supersu and what not.

Will this work in CM13 or its based ROMs?

MoSeenIt said:
Will this work in CM13 or its based ROMs?
Click to expand...
Click to collapse
Nope

Dude I tried everything exactly as you said still no luck
Sent from my Redmi Note 3 using Tapatalk

nikufellow said:
Dude I tried everything exactly as you said still no luck
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
flash abhiskek cm14.1 rom u definitely got volte...next flash any " N " rom, volte zip file

no luck
i tried almost every thing avilable on xda and miui forms ... follow the exact thing on the guids ..but no luck ho... really fed up can any one help me???? tried al most all roms avail on xda which supports volte but no luck

nikufellow said:
Dude I tried everything exactly as you said still no luck
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
arunkm94 said:
i tried almost every thing avilable on xda and miui forms ... follow the exact thing on the guids ..but no luck ho... really fed up can any one help me???? tried al most all roms avail on xda which supports volte but no luck
Click to expand...
Click to collapse
PM me.

The Guide is updated. Now VoLTE will definitely work for you guys.

faisal nafis said:
Why doesn't it work on second sim slot ??
Any reasons !! It works on MIUI though :crying::crying:
Click to expand...
Click to collapse
What difference does it make whether it works in 1st slot or 2nd?

Why only 6.11.3 miui? What about latest 8.1.1 miui?

kumar.gaurav85 said:
Why only 6.11.3 miui? What about latest 8.1.1 miui?
Click to expand...
Click to collapse
6.11.3 has been tested. You can try on 8.1.1.0 though.

Still No VoLTE for Redmi2 8gb variant

Hello, I currently am using a jio sim as my primary sim. However, i tried all the methods suggested on xda but still no volte.
List of things that i have tried:-
1. Tried flashing the modem(doesn't work at all)
2. Flashing MIUI 7.5 version as suggested( V7.5.2.0.LHJMIDE_20160629.0000.25_5.1_global ) to be precise
3. Tried flashing another one of Redmi2 Prime's firmware(global developer rom)
4. And tried flashing several other ROMs(Orion OS, RR, Tesla, AOSP and DU) after doing step2 and still no volte support found
Can anybody help me?

@cypherx1998 Flash kitkat dev rom 7.1.5 or newer from fastboot, after it starts booting turn of your device and boot into fastboot, then flash the latest lollipop dev rom and boot into it, setup your device, then go to settings, mobile data (I think, it's where you have the option to change to 3g and 4g data) and enable VoLTE voice calls, after that, reboot into fastboot and flash TWRP 3.0.2-0, then go to wipe, advanced wipe, select:
cache/dalvik-cache
system
data
internal storage
and then wipe, after that go to wipe again, select cache, then "change partition format" select F2FS, and swipe to apply, do the same thing for data, don't do on dalvik-cache and system, or else this may brick your device.
Then flash the wt88047 firmware avaliable on LineageOS second or third post, do a full wipe again, install VoLTE universal Patch Here do a full wipe again, then flash the latest LineageOS build, after wipe only cache and data, flash OpenGapps pico arm android 7.1.1 and reboot.
You will have VoLTE

Try to flash RR 5.8.0 nought ROM. U will have voLTe working on ur device. I am currently using that ROM. Go for it

Shashank Varma said:
Try to flash RR 5.8.0 nought ROM. U will have voLTe working on ur device. I am currently using that ROM. Go for it
Click to expand...
Click to collapse
No... I didn't get VoLTE...
I am using the same ROM.
---------- Post added at 09:27 AM ---------- Previous post was at 09:24 AM ----------
If u want VoLTE u will have to flash the redmi 2 prime rom either fastboot or recovery...
However ur device will start lagging and ur free ram won't go higher than 300 MB.
http://bigota.d.miui.com/6.7.5/wt88....5_20160523.0000.23_5.1_global_53ff97d6ba.tgz
And the recovery one is::
http://bigota.d.miui.com/6.7.5/miui_HM2XWCProGlobal_6.7.5_8673db6ce3_5.1.zip

voLte is working for sim1. See the screenshot below

Volte works just flash latest wxcpro ROM by editing its script so that it won't say 'this ROM is for so and so ****'

Shashank Varma said:
voLte is working for sim1. See the screenshot below
Click to expand...
Click to collapse
How can that screenshot say that VoLTE is working??? I can't see any HD or VoLTE sign..

U can see there enhanced 4g LTE mode which means volte.

Shashank Varma said:
U can see there enhanced 4g LTE mode which means volte.
Click to expand...
Click to collapse
Nope bro!!! I don't think that's VoLTE! Coz I have got that enabled and I can't call using a Jio SIM!!

Didnt work
TecnoTailsPlays said:
@cypherx1998 Flash kitkat dev rom 7.1.5 or newer from fastboot, after it starts booting turn of your device and boot into fastboot, then flash the latest lollipop dev rom and boot into it, setup your device, then go to settings, mobile data (I think, it's where you have the option to change to 3g and 4g data) and enable VoLTE voice calls, after that, reboot into fastboot and flash TWRP 3.0.2-0, then go to wipe, advanced wipe, select:
cache/dalvik-cache
system
data
internal storage
and then wipe, after that go to wipe again, select cache, then "change partition format" select F2FS, and swipe to apply, do the same thing for data, don't do on dalvik-cache and system, or else this may brick your device.
Then flash the wt88047 firmware avaliable on LineageOS second or third post, do a full wipe again, install VoLTE universal Patch Here do a full wipe again, then flash the latest LineageOS build, after wipe only cache and data, flash OpenGapps pico arm android 7.1.1 and reboot.
You will have VoLTE
Click to expand...
Click to collapse
Took me time to try this...but didnt work.....you might think that i didnt follow the steps properly..but i did and i verified on each step that i was doing it the right way....but sadly it didnt work

You may try Redmi 2 Prime ROM (stable or dev) for some days..Check whether you get VoLTE on that ROM or not.. If yes then use that for some days maybe 2 or 3 days..It will be slow at first then after 2 to 3 hours of use u will feel no lag..I was using Developer version for 2-3 months which was fine for daily driver..I just faced storage issue..Then I tried stable version, and the same issue was there.. So I decided to use some custom ROMs and I Flashed AOSP Extended (Nougat)..VoLTE works fine and the ROM is so much smooth with good battery backup..But due to slow internet speed I am using Mokee 7.1 right now.. You can try using R2P ROM for some days...If VoLTE works there then it will work on other ROMs too( as per my experience).
Ignore my english...

Ofnigamer said:
You may try Redmi 2 Prime ROM (stable or dev) for some days..Check whether you get VoLTE on that ROM or not.. If yes then use that for some days maybe 2 or 3 days..It will be slow at first then after 2 to 3 hours of use u will feel no lag..I was using Developer version for 2-3 months which was fine for daily driver..I just faced storage issue..Then I tried stable version, and the same issue was there.. So I decided to use some custom ROMs and I Flashed AOSP Extended (Nougat)..VoLTE works fine and the ROM is so much smooth with good battery backup..But due to slow internet speed I am using Mokee 7.1 right now.. You can try using R2P ROM for some days...If VoLTE works there then it will work on other ROMs too( as per my experience).
Ignore my english...
Click to expand...
Click to collapse
Yes just flash either the dev or stable Redmi 2 Prime ROM. I can say that this works because I have flashed it on as many as three devices. Just go to this link and find out Redmi 2 Prime Global Developer ROM or Global Stable ROM.
http://en.miui.com/a-234.html
Remember these are to be flashed in fastboot. After flashing this, you can flash any Nougat based ROM like LOS, RR, AEX, cRDroid, etc to enjoy VoLTE on those ROMs too.

cypherx1998 said:
Hello, I currently am using a jio sim as my primary sim. However, i tried all the methods suggested on xda but still no volte.
List of things that i have tried:-
1. Tried flashing the modem(doesn't work at all)
2. Flashing MIUI 7.5 version as suggested( V7.5.2.0.LHJMIDE_20160629.0000.25_5.1_global ) to be precise
3. Tried flashing another one of Redmi2 Prime's firmware(global developer rom)
4. And tried flashing several other ROMs(Orion OS, RR, Tesla, AOSP and DU) after doing step2 and still no volte support found
Can anybody help me?
Click to expand...
Click to collapse
1)download Mi flash tool
http://en.miui.com/forum.php?mod=attachment&aid=NzYzMjQzfGFlZDEyMDMzfDE0NzI1NDg5MDJ8ODE5MTF8MzM2MTg0
2)
download fastboot rom redmi 2 prime global stable or china
http://bigota.d.miui.com/V8.1.3.0.L...DI_20161230.0000.00_5.1_global_23ac47dab8.tgz
above is global stable link.
3) put your phone in fastboot mode, unzip the downloaded rom. (avoid spaces in between folder path/name eg "C:\New Folder\Extracted rom\...." is not allowed instead it should be like C:\New_Folder\Extracted_rom\.......)
4) open mi flashing tool see if your device is listed. refresh to see. select clean all (flash_all.bat) option from bottom of mi flashing tool.
5) click on flash, and let it boot.
you would be able to use VoLTE now in miui rom. if you want to change to any N based roms just flash twrp and clean install any rom.

Flashing the MIUI 7.5.2 global ROM should work. Wipe everything and do a clean install. Once you see an indication of VOLTE on the MIUI then you should be able to get the same in other ROMS. I just did it recently.

Flash the redmi 2 prime rom using any of the methods fast boot or normal. If VoLte is what u r looking for

cypherx1998 said:
Hello, I currently am using a jio sim as my primary sim. However, i tried all the methods suggested on xda but still no volte.
List of things that i have tried:-
1. Tried flashing the modem(doesn't work at all)
2. Flashing MIUI 7.5 version as suggested( V7.5.2.0.LHJMIDE_20160629.0000.25_5.1_global ) to be precise
3. Tried flashing another one of Redmi2 Prime's firmware(global developer rom)
4. And tried flashing several other ROMs(Orion OS, RR, Tesla, AOSP and DU) after doing step2 and still no volte support found
Can anybody help me?
Click to expand...
Click to collapse
I think i can help you dude. Flash this fastboot rom you have. Boot it with YOUR Jio sim in the first sim slot inside. Setup everything normally in the phone. After it booted, you WILL see the Volte symbol in the statusbar.
Now root it and install TWRP. Now install a Volte rom of your choice. It has to work.
I will say you why this has to work. I own this device. The 8GB variant. My friend owns the same device. While my device had Volte working, his' didn't work. I checked it. He had kitkat bootloader. Then i flashed the lollipop stock rom in his device in fastboot mode. i directly rooted the device and installed cm14.1 in his device. Still no Volte. I wondered what the fcuk was just happening. My friend was like i'll cope up with this dude. I'll use jio 4g voice. But couldn't leave it like that. I tried it the second time just like i have told you and then VOLTE STARTED ****ING WORKING MAN !!! I was on cloudnine !!! Just helping you out !!
I think the reason Volte was not working is because the jio sim needed the stock rom to trigger it to start Volte sevices. Before it, the jio must have thought "yeah, this is a non volte device ". Just saying !!
Have a nice day !!!

Sankar Bharani said:
I think i can help you dude. Flash this fastboot rom you have. Boot it with YOUR Jio sim in the first sim slot inside. Setup everything normally in the phone. After it booted, you WILL see the Volte symbol in the statusbar.
Now root it and install TWRP. Now install a Volte rom of your choice. It has to work.
I will say you why this has to work. I own this device. The 8GB variant. My friend owns the same device. While my device had Volte working, his' didn't work. I checked it. He had kitkat bootloader. Then i flashed the lollipop stock rom in his device in fastboot mode. i directly rooted the device and installed cm14.1 in his device. Still no Volte. I wondered what the fcuk was just happening. My friend was like i'll cope up with this dude. I'll use jio 4g voice. But couldn't leave it like that. I tried it the second time just like i have told you and then VOLTE STARTED ****ING WORKING MAN !!! I was on cloudnine !!! Just helping you out !!
I think the reason Volte was not working is because the jio sim needed the stock rom to trigger it to start Volte sevices. Before it, the jio must have thought "yeah, this is a non volte device ". Just saying !!
Have a nice day !!!
Click to expand...
Click to collapse
How do you check what bootloader you're on currently?

cypherx1998 said:
How do you check what bootloader you're on currently?
Click to expand...
Click to collapse
I think their is no(simple) way to know that.But you can try a app named "phone info". But it didn't work out for me.It is showing unknown bootloader.
The best way to know your bootloader version is " try to remember which miui ROM u flashed last".
Or there is lolypop firmware in lineage is thread for u.

cypherx1998 said:
How do you check what bootloader you're on currently?
Click to expand...
Click to collapse
Simple. Press vol down and power. will boot into fastboot mode.
If the letters saying FASTBOOT are in green color and small, it is in KitKat bootloader. If the letters saying FASTBOOT are in Blue color and little big, it is Lollipop. I know it sounds a little lame, but trust me, this is a reliable method. If you flashed the lollipop rom via the mi Flash application through system, and youve got the blue colored bootloader, then you are on lollipop bootloader

SankarWayne said:
Simple. Press vol down and power. will boot into fastboot mode.
If the letters saying FASTBOOT are in green color and small, it is in KitKat bootloader. If the letters saying FASTBOOT are in Blue color and little big, it is Lollipop. I know it sounds a little lame, but trust me, this is a reliable method. If you flashed the lollipop rom via the mi Flash application through system, and youve got the blue colored bootloader, then you are on lollipop bootloader
Click to expand...
Click to collapse
well atleast now i know i'm on lollipop bootloader.....but still no volte man

[EASY VoLTE GUIDE] Guide to get VoLTE in RR Android-7.1.1_r6 5.8.0[OFFICIAL]

How to get VoLTE works at the 1st time.
The Things You Need
1) Redmi Note 3
2)TWRP recovery ZCX recommended ( i used alka 3.x)
3)A Pc with Working Internet Connection
4)ROM CM-14.0-20161017-UNOFFICIAL-kenzo https://www.androidfilehost.com/?fid=385035244224385372
5)CM-14-firmware-20160913 https://www.androidfilehost.com/?fid=24727332921016635
YEAH THATS ENOUGH :laugh:
Instructions Below:
1. Put both the downloaded CM zips in sdcard anywhere!
2. Boot into TWRP
3. Wipe system,dalvik cache ,cache and factory reset
4. Flash CM-14-firmware-20160913
5. Flash ROM CM-14.0-20161017-UNOFFICIAL-kenzo
after successful installation reboot the device.You will see HD icon at top left corner.
now reboot into recovery and flash ur favorite N ROM. and Gapps.
:laugh:voilaaaa you have fixed your VoLTE In few Steps:laugh:
NOTE : You can backup your EFS and Firmware (Optional) if in future u lost ur VoLTE.Just restore EFS & FIRMWARE
AFTER THESE STEPS I HAVE FLASHED LATEST RESURRECTION REMIX Android-7.1.1_r6 5.8.0 [OFFICIAL]
Hit Thanks If it works for u, its the simplest method.
UPDATE : 2ND Sim Slot doesn't work,i ll test again n update the thread again.
Slot 1 works fine with JIO VoLTE n Airtel.

why not to flash:
CM14.1-firmware_20161205.zip
??
it is newer, any idea?

Its because i tried all other methods,exept the miui fastboot flash method, i was too lazy to download heavy rom like miui n thn again unlocking the bootloader take much time
So i make it work with what i already had in pc!
Bdw u can try latest firmware if u want, i just shared what worked for me.

Will taking a nandroid backup of current ROM (data and system) and then follow these steps and restore the backup work?
Sent from my Redmi Note 3 using Tapatalk

The OP method gives an encrypted ROM which asks for password. Is this normal?
Sent from my Redmi Note 3 using Tapatalk

​
$()/\/@ said:
Will taking a nandroid backup of current ROM (data and system) and then follow these steps and restore the backup work?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Whats your current rom?

piyush7243 said:
The OP method gives an encrypted ROM which asks for password. Is this normal?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Your are just going to fix VoLTE use alka twrp and do a factory reset then wipe ,cache,dalvik vache,system,data n flash it, follow steps, after getting VoLTE , u can use your favorite N rom, i have tried resurrection remix which i have mentioned

shub4m said:
Your are just going to fix VoLTE use alka twrp and do a factory reset then wipe ,cache,dalvik vache,system,data n flash it, follow steps, after getting VoLTE , u can use your favorite N rom, i have tried resurrection remix which i have mentioned
Click to expand...
Click to collapse
Does it work with sim2 as well?
Sent from my Redmi Note 3 using Tapatalk

Bro I have an idea,tell me whether it would work or no! I have already flashed rr official rom and have no voLTE! I will backup everything except efs! I then will wipe everything and follow ur steps but instead of flashing new rom I'll directly restore my backup without formatting anything! Is there a a chance of getting voLTE this way or will I end up in boot loop cause of mixing of files? Pls ans.

shub4m said:
​
Whats your current rom?
Click to expand...
Click to collapse
Official nightly RR 5.8.0
Sent from my Redmi Note 3 using Tapatalk

piyush7243 said:
Does it work with sim2 as well?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
No it doesn't work i just tested now, and 1 more thing i have tested that if we put both the sim cards ,it doesn't work,both the sim cards shows no sim card,. I have to try to fix it today,. Slot 1 is working with any simcard!

ckflash09 said:
Bro I have an idea,tell me whether it would work or no! I have already flashed rr official rom and have no voLTE! I will backup everything except efs! I then will wipe everything and follow ur steps but instead of flashing new rom I'll directly restore my backup without formatting anything! Is there a a chance of getting voLTE this way or will I end up in boot loop cause of mixing of files? Pls ans.
Click to expand...
Click to collapse
Backup the rom, follow my steps and then restore the system n data, try your luck. Check the thread updated , there's a bug with 2nd sim slot

$()/\/@ said:
Official nightly RR 5.8.0
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Tell me does the 2nd sim slot works fine ?

shub4m said:
Tell me does the 2nd sim slot works fine ?
Click to expand...
Click to collapse
Yup
Sent from my Redmi Note 3 using Tapatalk

ckflash09 said:
Bro I have an idea,tell me whether it would work or no! I have already flashed rr official rom and have no voLTE! I will backup everything except efs! I then will wipe everything and follow ur steps but instead of flashing new rom I'll directly restore my backup without formatting anything! Is there a a chance of getting voLTE this way or will I end up in boot loop cause of mixing of files? Pls ans.
Click to expand...
Click to collapse
everything means?...Backup Efs, data,system, boot,firmware, etc.....Clean and install listed firmware, ROM....Make sure volte works, now make a backup2 of everything(efs, firmware,etc) except boot,data,system.....Now restore boot,data,system only from backup 1.. if you don't do properly it will go to edl bootloop..next u need pc, mi flash tool, time waste, head ache.....better Try titanium backup pro to backup with clean Rom.

$()/\/@ said:
Yup
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Well that means after following my procedure 2nd sim wont work, still i ll give a try to fix 2nd sim.

ckflash09 said:
Bro I have an idea,tell me whether it would work or no! I have already flashed rr official rom and have no voLTE! I will backup everything except efs! I then will wipe everything and follow ur steps but instead of flashing new rom I'll directly restore my backup without formatting anything! Is there a a chance of getting voLTE this way or will I end up in boot loop cause of mixing of files? Pls ans.
Click to expand...
Click to collapse
shub4m said:
How to get VoLTE works at the 1st time.
The Things You Need
1) Redmi Note 3
2)TWRP recovery ( i use alka 3.x)
3)A Pc with Working Internet Connection
4)ROM CM-14.0-20161017-UNOFFICIAL-kenzo https://www.androidfilehost.com/?fid=385035244224385372
5)CM-14-firmware-20160913 https://www.androidfilehost.com/?fid=24727332921016635
YEAH THATS ENOUGH :laugh:
Instructions Below:
1. Put both the downloaded CM zips in sdcard anywhere!
2. Boot into TWRP
3. Wipe system,dalvik cache ,cache and factory reset
4. Flash CM-14-firmware-20160913
5. Flash ROM CM-14.0-20161017-UNOFFICIAL-kenzo
after successful installation reboot the device.You will see HD icon at top left corner.
now reboot into recovery and flash ur favorite N ROM. and Gapps.
:laugh:voilaaaa you have fixed your VoLTE In few Steps:laugh:
NOTE : You can backup your EFS and Firmware (Optional) if in future u lost ur VoLTE.Just restore EFS & FIRMWARE
AFTER THESE STEPS I HAVE FLASHED LATEST RESURRECTION REMIX Android-7.1.1_r6 5.8.0 [OFFICIAL]
Hit Thanks If it works for u, its the simplest method.
UPDATE : 2ND Sim Slot doesn't work,i ll test again n update the thread again.
Slot 1 works fine with JIO VoLTE n Airtel.
Click to expand...
Click to collapse
It didn't work for me...I lost volte after edl bootloop, reflashing using mi flash tool, what ever custom ROM, kernel, firmware I load, I don't see volte HD, now updater 7 error to flash miui stock..I guess this will be my last try before changing the phone. Any suggestions, ideas to try..I like to keep Android 7.1 RR+ Kenzo kernel+ other mods.....This volte is stopping me to do end flashing.

pranavateja99 said:
It didn't work for me...I lost volte after edl bootloop, reflashing using mi flash tool, what ever custom ROM, kernel, firmware I load, I don't see volte HD, now updater 7 error to flash miui stock..I guess this will be my last try before changing the phone. Any suggestions, ideas to try..I like to keep Android 7.1 RR+ Kenzo kernel+ other mods.....This volte is stopping me to do end flashing.
Click to expand...
Click to collapse
Do clean flash with my method u ll see hd icon at top .. m using volte in rr 5.8 Android 7.1, with radon kernal

Link pls
shub4m said:
Do clean flash with my method u ll see hd icon at top .. m using volte in rr 5.8 Android 7.1, with radon kernal
Click to expand...
Click to collapse
Link ur method bob! ?

after" 5. Flash ROM CM-14.0-20161017-UNOFFICIAL-kenzo
im on bootloop, what should i do sir

[Solved] Problem writing the Loader.img file

Hello everyone
My XT1572 after a hard-drive time has been hoping for a method to write the Loader.img file to the memory card. However, I can not write the Loader.img file to the memory card successfully. I have tried some software, some memory cards, some computers but all have the same result. The software has successfully written. But the result is many unformatted partitions. I do not understand what the reason is.
A friend of mine advised me to try to write the loader.img file on win8.1 32 bit and my phone woke up.

You won't be able to read the the card with windows since it uses a different file system structure.

Posting in 2 different spots will not get you answers faster. I'd suggest you stick to the main thread about this

BuildUpNow said:
You won't be able to read the the card with windows since it uses a different file system structure.
Click to expand...
Click to collapse
I tried with another Loader.img file and it has a folder with the image name

BuildUpNow said:
You won't be able to read the the card with windows since it uses a different file system structure.
Click to expand...
Click to collapse
I found on the internet that many people are like me and they do not understand the cause. So I decided to create a separate theme for it

Try using a 32GB SD Card. Because the Original Loader.img was created on 32GB SD card.

Loader.img is good - I'm sure. If you want I can make xt1572 RetEu, 6.0.1 and upload here.
I haven't stock rom but It does not matter(i think). @Mun123

antariksh said:
Try using a 32GB SD Card. Because the Original Loader.img was created on 32GB SD card.
Click to expand...
Click to collapse
I tried on 32gb sd cảd, the same result

dzidexx said:
Loader.img is good - I'm sure. If you want I can make xt1572 RetEu, 6.0.1 and upload here.
I haven't stock rom but It does not matter(i think). @Mun123
Click to expand...
Click to collapse
Can you make it and upload here. Thank you very much

https://mega.nz/#!oo5nDASK!Xja0JJFwru9FU5-Yuj8ANw_E_ifwg17FKcY56A9YVwk @Mun123

dzidexx said:
https://mega.nz/#!oo5nDASK!Xja0JJFwru9FU5-Yuj8ANw_E_ifwg17FKcY56A9YVwk @Mun123
Click to expand...
Click to collapse
Thanks!!! I try it

dzidexx said:
https://mega.nz/#!oo5nDASK!Xja0JJFwru9FU5-Yuj8ANw_E_ifwg17FKcY56A9YVwk @Mun123
Click to expand...
Click to collapse
It does not work with my phone. Or is my phone suffering from something serious? I just tried downgrading to FW 6.0 and updated ota to 7.0 then hardbricked

dzidexx said:
Loader.img is good - I'm sure. If you want I can make xt1572 RetEu, 6.0.1 and upload here.
I haven't stock rom but It does not matter(i think). @Mun123
Click to expand...
Click to collapse
If I use this Loader.img, then I could flash (CLARK_RETUS_6.0_MPHS24.49-18-8_cid9_subsidy-DEFAULT_CFC.xml) for example as I have the XT1575, and wouldn't need to use the (CLARK_RETLA_DS_7.0_NPHS25.200-15-3_cid12_subsidy-DEFAULT_CFC.xml) file and then flash the XT1575 6.0 modem?
And then also... once I'm on (CLARK_RETUS_6.0_MPHS24.49-18-8_cid9_subsidy-DEFAULT_CFC.xml), I can just jump str8 to LineageOS 14.1? I don't need to upgrade to the latest stock version right? The modem doesn't change as long as I'm Marshmallow?

All custom roms haven't any Moto Nougat sources.
Users on stock Nougat need to downgrade baseband(modem).
Users on stock MM can simply flash any custom 14.x. @Bwangster12

dzidexx said:
All custom roms haven't any Moto Nougat sources.
Users on stock Nougat need to downgrade baseband(modem).
Users on stock MM can simply flash any custom 14.x. @Bwangster12
Click to expand...
Click to collapse
Okay thanks... so if I flashed the LA 7.0 I'd have to flash the 6.0 modem for my region over it. If I used the 6.0 Loader in this thread, I could use the latest 6.0 firmware for my region... and then jump to 14.1?

If you have working system - You don't need and shouldn't use the loader.img.
Just flash modems for your region
or
Flash stock MM without: bootloader, gpt, oem commands. @Bwangster12

dzidexx said:
If you have working system - You don't need and shouldn't use the loader.img.
Just flash modems for your region
or
Flash stock MM without: bootloader, gpt, oem commands. @Bwangster12
Click to expand...
Click to collapse
No I don't have a working system. I'm bricked and it says Qualcomm etc when I connect by XT1575 to a pc.

So do it like you get the answer in another thread.

Mun123 said:
Thanks!!! I try it
Click to expand...
Click to collapse
Hi, I've installed lineage 14.1, rooted then reverted back stock rom(6.0). It worked fine until the update. So now, phone is completely dead no fastboot. If connected to the computer Qualcomm HS-USB QDloader 9008 is showing up in device manager.
Came across this thread (https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860) and download loader.img and followed the steps, but...
i'm having the same problem with burning the img file in win32 disk imager. It is creating multiple partitions and if install the sd card in my xt1572 it does not do anything for the steps in the above thread.
What I'm i doing wrong
is the other loaderMXS_6.img [email protected]
Thanks

pskkowshik said:
Hi, I've installed lineage 14.1, rooted then reverted back stock rom(6.0). It worked fine until the update. So now, phone is completely dead no fastboot. If connected to the computer Qualcomm HS-USB QDloader 9008 is showing up in device manager.
Came across this thread (https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860) and download loader.img and followed the steps, but...
i'm having the same problem with burning the img file in win32 disk imager. It is creating multiple partitions and if install the sd card in my xt1572 it does not do anything for the steps in the above thread.
What I'm i doing wrong
is the other loaderMXS_6.img [email protected]
Thanks
Click to expand...
Click to collapse
I
think the loader.img file is not compatible with my phone. Someone can post to the file loader.img of Nougat stock rom for Asian version of XT1572 ?