Database Users

LG G2 all data wiped

Hi,
I'll did a factory reset with TWRP via advanced,by accident all partitions,including the internal storage partition.
Now my phone does nothing, but i''m able to boot in to TWRP.
When i'm connecting my phone to my computer i'll see a error with the driver. I'll installed the LG drivers from the website. But still see a error with the driver.
Error message: There is no compatible driver installed for this device.
I'll need to push a ROM to the phone, anyone a idea ?
Thnx in advance.
Device: LG G2 D802 International

From twrp you can mount usb storage (your sdcard or internal memory)
-dFx-

ArneNL said:
Hi,
I'll did a factory reset with TWRP via advanced,by accident all partitions,including the internal storage partition.
Now my phone does nothing, but i''m able to boot in to TWRP.
When i'm connecting my phone to my computer i'll see a error with the driver. I'll installed the LG drivers from the website. But still see a error with the driver.
Error message: There is no compatible driver installed for this device.
I'll need to push a ROM to the phone, anyone a idea ?
Thnx in advance.
Device: LG G2 D802 International
Click to expand...
Click to collapse
If you have a USB OTG cable, load ROM/gapps/etc onto a thumb drive and connect to your device. In TWRP, go to mount and select USB. Go back to main menu and select install. Scroll for USB and select files.

I'll solved the problem. I'll reinstalled the drivers, restarted my computer and the supporttool regonized my Phone again. I flashed the stock rom via downloadmode.
Thnx for your answer.
Sent from my GT-I9505 using XDA Free mobile app

Twrp failed to mount factory.

I'm getting an error in my twrp recovery.
Which is - failed to mount '/factory'
I don't know how to fix it.
Please help me to fix the error.

foysal04 said:
I'm getting an error in my twrp recovery.
Which is - failed to mount '/factory'
I don't know how to fix it.
Please help me to fix the error.
Click to expand...
Click to collapse
Mount factory in settings

(SOLVED)
foysal04 said:
I'm getting an error in my twrp recovery.
Which is - failed to mount '/factory'
I don't know how to fix it.
Please help me to fix the error.
Click to expand...
Click to collapse
[Solved] Dear I had same Problem in MY MI REDMI NOTE 3 so according to my phone I am sharing my experience. but now fixed. I tried more TWRP but REDWOLFTWRP worked well to clear cache system data, and internal storage. go to Fastboot mode then connect and install Redwolf TWRP again through .bat file then It prompt Redwolf logo in mobile screen then again WIPE and clear cache/dalvik system data include internal storage and if any error then please select data/ system/cache one bye one select change FS option to chanfe file syste try eac one which is suitable for you. ext3, ext4 or other. then clear again for confirmation then go back and click REBOOT option and selct bootloader mode. then click volume down + power to go into FASTBOOOT mode then install again Redwold.bat file now you will see Phone drive in MY COMPUTER in your Laptop/PC now copy your Stable Firmware and paste into Phone Internal Memory. then go to Redwolf TWRP and swipe to Run FIRMWARE zip file. after finish you will see reboot option in bottom just click and it will restart your Phone and first time It will take 10 to 20 minute in while it can also restart 3 or 4 time (sometime) so be patience
---------- Post added at 06:12 AM ---------- Previous post was at 06:07 AM ----------
Lazynestor said:
Mount factory in settings
Click to expand...
Click to collapse
[Solved] Dear I had same Problem in MY MI REDMI NOTE 3 so according to my phone I am sharing my experience. but now fixed. I tried more TWRP but REDWOLFTWRP worked well to clear cache system data, and internal storage. go to Fastboot mode then connect and install Redwolf TWRP again through .bat file then It prompt Redwolf logo in mobile screen then again WIPE and clear cache/dalvik system data include internal storage and if any error then please select data/ system/cache one bye one select change FS option to chanfe file syste try eac one which is suitable for you. ext3, ext4 or other. then clear again for confirmation then go back and click REBOOT option and selct bootloader mode. then click volume down + power to go into FASTBOOOT mode then install again Redwold.bat file now you will see Phone drive in MY COMPUTER in your Laptop/PC now copy your Stable Firmware and paste into Phone Internal Memory. then go to Redwolf TWRP and swipe to Run FIRMWARE zip file. after finish you will see reboot option in bottom just click and it will restart your Phone and first time It will take 10 to 20 minute in while it can also restart 3 or 4 time (sometime) so be patience

Help: Reboot system boots into TWRP Recovery

Hey everyone,
I tried to flash this stock ROM (as zip) via TWRP, and get no error messages. When i try to reboot to system I only get back into TWRP Recovery.. That being said, after first flash, I got a message saying the phone was unable to decrypt and that I had to factory reset, but I only got this message once. I've tried to wipe data, cache, dalvik, system etc.
Edit; also tried running LGUP with Uppercut 1.0, where I get the error "There is no handset connected. Please, connect a handset(s)."
I am able to access the phone from Windows explorer. In Device Manager, the Driver to H870 is just called 'MTP USB Device'.
Does anyone know how to fix this?
My model is European H870

make full wipe over minimal ADB with these commands :
fastboot format userdata
fastboot format cache
fastboot format system
get you a 20c kdz and make do with LGUP and uppercut an update ! note ! first uppercut and then start LGUP wait until everything is through and your phone will start.
do not currently take zip because twrp is still in development use kdz file LGUP + Uppercut

Yureka Plus Unable to Mount storage, system, cache. Internal memory 0. System 0

My Yureka plus was working fine for 1 year with Crdroid 3.6 nougat rom 7.1.2
Two months back One fine morning when I woke up my Yureka plus display says
Encryption unsuccessful.
Please Reset the mobile.
I clicked the reset.
That is all. Nothing.
My twrp 3.2.1 unable to wipe, anything as earlier.
Error message in every attempt.
Factory reset- error
wipe cache, system, dalvik cache internal storage- error
tried all the methods found in various forums like
Repair file system
Resize the system,
Change the file system
Error,
Internal storage 0
Cache 0
System 0
Unable to mount storage, system, cache.
Cant flash any rom- shows error message only.
Annabathina Unbrick tool- no success.
flashng CM 12.1 using fast boot mode- failure
Since boot write error
System write error
Cache write error
Recovery write error
So can’t Install.
Treid YGDP tool.
No success. After few seconds error message.
Whenever time permits I tried all the methods.
till date no success.
when plugged in the usb charger it directly opens the fast boot mode only that’s all.
When I switch on just a blink of Yureka logo and fast boot mode then blank.
Again if I put into charging mode only fast boot mode open till I connect the charging cable,
Once I remove it nothing, Again blank screen.
As a last attempt I had given to the Micromax service center.
After 4 days they said motherboard has to be changed with the cost of Rs.3750/!
Such a easy reply from them
I got back the mobile and tried again.
Till date no success..
I searched everywhere.
Several persons facing the same issue.
But no solution.
Any one have solutions

cpswamy said:
My Yureka plus was working fine for 1 year with Crdroid 3.6 nougat rom 7.1.2
Two months back One fine morning when I woke up my Yureka plus display says
Encryption unsuccessful.
Please Reset the mobile.
I clicked the reset.
That is all. Nothing.
My twrp 3.2.1 unable to wipe, anything as earlier.
Error message in every attempt.
Factory reset- error
wipe cache, system, dalvik cache internal storage- error
tried all the methods found in various forums like
Repair file system
Resize the system,
Change the file system
Error,
Internal storage 0
Cache 0
System 0
Unable to mount storage, system, cache.
Cant flash any rom- shows error message only.
Annabathina Unbrick tool- no success.
flashng CM 12.1 using fast boot mode- failure
Since boot write error
System write error
Cache write error
Recovery write error
So can’t Install.
Treid YGDP tool.
No success. After few seconds error message.
Whenever time permits I tried all the methods.
till date no success.
when plugged in the usb charger it directly opens the fast boot mode only that’s all.
When I switch on just a blink of Yureka logo and fast boot mode then blank.
Again if I put into charging mode only fast boot mode open till I connect the charging cable,
Once I remove it nothing, Again blank screen.
As a last attempt I had given to the Micromax service center.
After 4 days they said motherboard has to be changed with the cost of Rs.3750/!
Such a easy reply from them
I got back the mobile and tried again.
Till date no success..
I searched everywhere.
Several persons facing the same issue.
But no solution.
Any one have solutions
Click to expand...
Click to collapse
Method 1
1 Download
https://androidfilehost.com/?fid=745849072291689565
2 extract the zip
3 rename flash.txt into flash.bat
4 run the flash.bat file
5 after commands runs, flash twrp 3.3 IMG
Done
Method 2
For method 2 contact me in telegram

Rajendran Rasa said:
Method 1
1 Download
https://androidfilehost.com/?fid=745849072291689565
2 extract the zip
3 rename flash.txt into flash.bat
4 run the flash.bat file
5 after commands runs, flash twrp 3.3 IMG
Done
Method 2
For method 2 contact me in telegram
Click to expand...
Click to collapse
Before posting the thread I tried that method Yureka backup files image flashing. Failed

ZE550KL Bricked as hard as possible......

My zool was working fine till yesterday till when I had to do a reboot...No special reason.Just rebooted and the phone started bootlooping.I went to TWRP to see what was wrong and maybe do a factory reset.In twrp when I tried to reset the device it showed mount error for all the partitions(asdf,cache,system,data).All those partitions showed 0 MB size as well.But my internal storage was accessible.So I backed up all my personal data using my pc and tried to format data from TWRP(The format option which requires a confirmation).After that my complete internal storage is being shown as 0 MB.Even internal storage is not accessible.Can't wipe anything..I think the partition got messed up somehow.I tried many tutorials which tells to rewrite partition.But the main issue is I can't get the device to boot in DIAG mode to get Qualcomm HS-USB 9006 mode.
So as of now,
1)Fastboot works-But no use since can't flash raw firmware since it fails at the beginning itself.i.e,the partition flashing stage..Same story with AFT
2)TWRP works-But again no use since can't wipe or flash anything.
One interesting thing is that if I flash a different version of twrp through fastboot it successfully flashes but when i boot into recovery it is the same old version.
So is my internal storage physically damaged?Is there any way out of this?How to atleast get into diag mode?
Any help would be appreciated.