6.0.1 - How to flash? - Nexus 6P Q&A, Help & Troubleshooting

I am looking for a clear explanation of how to flash Android 6.0.1 with root and encryption disabled without wiping data. With all the explanations through the forum, all the "if's" and "but's" get confusing and can be clear as mud. Thanks for your help.

i'm on 6.0 with a stock kernel with encryption disabled and an unlocked bootloader as well.
As far as i can tell you need 2 things.. Flash the System.IMG manually and then we need to wait for someone to post a modified stock 6.0.1 kernel that has encryption disabled too. you can get away with just flashing system.IMG and stay on your older 6.0 de encrypted kernel but I have seen online that wonky things happen when you dont stay up to date on your kernel sometimes.
I

nextelbuddy said:
i'm on 6.0 with a stock kernel with encryption disabled and an unlocked bootloader as well.
As far as i can tell you need 2 things.. Flash the System.IMG manually and then we need to wait for someone to post a modified stock 6.0.1 kernel that has encryption disabled too. you can get away with just flashing system.IMG and stay on your older 6.0 de encrypted kernel but I have seen online that wonky things happen when you dont stay up to date on your kernel sometimes.
I
Click to expand...
Click to collapse
I know there is a new boot.img file that has encryption disabled but I'm not sure how or where to install it properly.

how_to_flash_update_images_without_wiping_data
1) fastboot flash bootloader bootloader-angler-angler-02.45.img
2) fastboot flash radio radio-angler-angler-02.50.img
3) fastboot reboot-bootloader
4) fastboot flash boot boot.img
5) fastboot flash cache cache.img
6) fastboot flash system system.img
7) fastboot flash vendor vendor.img

ShaunWinSC said:
I know there is a new boot.img file that has encryption disabled but I'm not sure how or where to install it properly.
Click to expand...
Click to collapse
Where did you find or see this new 6.0.1 modified boot.img that has encryption disabled?
all you need is wugfresh tool kit and go into the Advanced settings and choose to flash individual files. and flash the boot.img to your device.
so flash the 6.0.1 system.img first and then flash the 6.0.1 modified boot.img 2nd.
remember that when you flash anything from fastboot, after the item is finished, the device reboots so you need to watch the device and have your fingers prepared to hold down power and volume down so the device goes back into fastboot and doesnt start booting again on its own.
---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------
Ovrclck said:
how_to_flash_update_images_without_wiping_data
1) fastboot flash bootloader bootloader-angler-angler-02.45.img
2) fastboot flash radio radio-angler-angler-02.50.img
3) fastboot reboot-bootloader
4) fastboot flash boot boot.img
5) fastboot flash cache cache.img
6) fastboot flash system system.img
7) fastboot flash vendor vendor.img
Click to expand...
Click to collapse
that works too!
now just to find the modified 6.0.1 boot.img that has encryption disabled.

nextelbuddy said:
Where did you find or see this new 6.0.1 modified boot.img that has encryption disabled?
all you need is wugfresh tool kit and go into the Advanced settings and choose to flash individual files. and flash the boot.img to your device.
so flash the 6.0.1 system.img first and then flash the 6.0.1 modified boot.img 2nd.
remember that when you flash anything from fastboot, after the item is finished, the device reboots so you need to watch the device and have your fingers prepared to hold down power and volume down so the device goes back into fastboot and doesnt start booting again on its own.
---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------
that works too!
now just to find the modified 6.0.1 boot.img that has encryption disabled.
Click to expand...
Click to collapse
Doughnut643 posted it in Android 6.0.1 thread, post #61.
https://www.dropbox.com/s/la4c6f8o5z...e-new.img?dl=0
It's been my understanding that Wug Fresh Tool Kit has been having some issues.
What about recovery, will it have to re-flashed? And what about root?

ShaunWinSC said:
Doughnut643 posted it in Android 6.0.1 thread, post #61.
https://www.dropbox.com/s/la4c6f8o5z...e-new.img?dl=0
It's been my understanding that Wug Fresh Tool Kit has been having some issues.
What about recovery, will it have to re-flashed? And what about root?
Click to expand...
Click to collapse
your recovery should remain as long as oy only flash the system.img and boot.img. you will need to reroot but I cant help you there unfortunately as I am not rooted myself since I need Androidpay to work.
i h avent had any issues with wugfrsh tool kit but if anything you dont have to use it. you can just go to the wugfresh tool kit folder and run the ADB and manually flash with the flash commands manually.

nextelbuddy said:
your recovery should remain as long as oy only flash the system.img and boot.img. you will need to reroot but I cant help you there unfortunately as I am not rooted myself since I need Androidpay to work.
i h avent had any issues with wugfrsh tool kit but if anything you dont have to use it. you can just go to the wugfresh tool kit folder and run the ADB and manually flash with the flash commands manually.
Click to expand...
Click to collapse
So you don't think I will need flash TWRP after flashing everthing.
I am hoping enough people chime in on how to do this so I can make a clear set of instructions.

I will let you know in a few min.
I just finished flashing 6.0.1 system.img, bootloader.img, cache.img, modified boot.img you posted and the device is at the android is upgrading screen.
if its successful, I will reboot into my recovery which had TWRP previously. if thats good i will let you know.
---------- Post added at 12:51 PM ---------- Previous post was at 12:18 PM ----------
ShaunWinSC said:
So you don't think I will need flash TWRP after flashing everthing.
I am hoping enough people chime in on how to do this so I can make a clear set of instructions.
Click to expand...
Click to collapse
so I have one problem now.
when My device fully boots up it now says :
"there's an internal problem with your device"
the only reference I can find to this is in regards to the Nexus 9 and flashing the Vendor.IMG file but nothing for phone devices.
any one know anything about this?
I h ave a feeling its because i flashed the stock 6.0.1 bootloader.IMG over my modified bootloader.IMG and I have TWRP installed AND a modified boot.img...
if i could find a new modified bootloader.img for 6.0.1 that would be awesome.
BTW my TWRP is still installed and launches fine.

nextelbuddy said:
I will let you know in a few min.
I just finished flashing 6.0.1 system.img, bootloader.img, cache.img, modified boot.img you posted and the device is at the android is upgrading screen.
if its successful, I will reboot into my recovery which had TWRP previously. if thats good i will let you know.
---------- Post added at 12:51 PM ---------- Previous post was at 12:18 PM ----------
so I have one problem now.
when My device fully boots up it now says :
"there's an internal problem with your device"
the only reference I can find to this is in regards to the Nexus 9 and flashing the Vendor.IMG file but nothing for phone devices.
any one know anything about this?
I h ave a feeling its because i flashed the stock 6.0.1 bootloader.IMG over my modified bootloader.IMG and I have TWRP installed AND a modified boot.img...
if i could find a new modified bootloader.img for 6.0.1 that would be awesome.
BTW my TWRP is still installed and launches fine.
Click to expand...
Click to collapse
Have u flashed vendor.img ???
That's probably the problem :silly:

kauemelhado said:
Have u flashed vendor.img ???
That's probably the problem :silly:
Click to expand...
Click to collapse
I did not. i thought that was only for the nexus 9 since the toolkit had that button disabled unless I set my device to Nexus 9. i flashed vendor.IMG and good to go now thanks lol

nextelbuddy said:
I did not. i thought that was only for the nexus 9 since the toolkit had that button disabled unless I set my device to Nexus 9. i flashed vendor.IMG and good to go now thanks lol
Click to expand...
Click to collapse
I saw a yt video today (https://www.youtube.com/watch?v=i6Gpi1ruLgM)
He showed that if you don't flash vendor.img, you'll get this error message

kauemelhado said:
I saw a yt video today (https://www.youtube.com/watch?v=i6Gpi1ruLgM)
He showed that if you don't flash vendor.img, you'll get this error message
Click to expand...
Click to collapse
so now I have a new issue. my device doesnt show LTE anymore. only H (im on ATT). if i go into cellular networks and toggle different APNs then wait a min.. LTE shows.. if i reboot the device its back to H again no matter how long i let it sit. I flashed everything except user.img so I have the latest Radio as well. makes no sense :/
thanks for the video!

I have flashed these three Files via the readme commands(fastboot flashing) and did not have my data partition wiped. and now FC's on ubermallow custom rom.

nextelbuddy said:
so now I have a new issue. my device doesnt show LTE anymore. only H (im on ATT). if i go into cellular networks and toggle different APNs then wait a min.. LTE shows.. if i reboot the device its back to H again no matter how long i let it sit. I flashed everything except user.img so I have the latest Radio as well. makes no sense :/
thanks for the video!
Click to expand...
Click to collapse
Some people are having this problem with EX kernel. But I guess the kernel is not the problem.
I'll flash the update later on today, then i'll tell you how that work for me hehe

nextelbuddy said:
so now I have a new issue. my device doesnt show LTE anymore. only H (im on ATT). if i go into cellular networks and toggle different APNs then wait a min.. LTE shows.. if i reboot the device its back to H again no matter how long i let it sit. I flashed everything except user.img so I have the latest Radio as well. makes no sense :/
thanks for the video!
Click to expand...
Click to collapse
I flashed all the imgs last night (had some troubles with being dumb installing twrp :silly:
But other than that, everything works perfeclty. LTE is fine. (here in brazil at least)
I'm currently on Stock 6.0.1 + EX Kernel + SuperSu 2.61

kauemelhado said:
I flashed all the imgs last night (had some troubles with being dumb installing twrp :silly:
But other than that, everything works perfeclty. LTE is fine. (here in brazil at least)
I'm currently on Stock 6.0.1 + EX Kernel + SuperSu 2.61
Click to expand...
Click to collapse
Nice, how did you made it? Did you leave the recovery.img?

Martini3001 said:
Nice, how did you made it? Did you leave the recovery.img?
Click to expand...
Click to collapse
I flashed stock recovery and later on flashed twrp.
I was getting the android of death when booting into TWRP.
So, I did this:
-fasboot flash recovery *twrp*
-fastboot reboot-bootloader
*on your fone* using the volume buttons search for "RECOVERY"
-boot into recovery
-thank me!
lololol

I am facing the same problem. After flashing the files manually as below -
1) fastboot flash bootloader bootloader-angler-angler-02.45.img
2) fastboot flash radio radio-angler-angler-02.50.img
3) fastboot reboot-bootloader
4) fastboot flash boot boot.img
5) fastboot flash cache cache.img
6) fastboot flash system system.img
7) fastboot flash vendor vendor.img
I rebooted the phone into bootloader and flashed TWRP. After flashing I could boot into TWRP, but if I reboot and try to boot into TWRP little android guy appears.
What am I doing wrong?

MPAI said:
I am facing the same problem. After flashing the files manually as below -
1) fastboot flash bootloader bootloader-angler-angler-02.45.img
2) fastboot flash radio radio-angler-angler-02.50.img
3) fastboot reboot-bootloader
4) fastboot flash boot boot.img
5) fastboot flash cache cache.img
6) fastboot flash system system.img
7) fastboot flash vendor vendor.img
I rebooted the phone into bootloader and flashed TWRP. After flashing I could boot into TWRP, but if I reboot and try to boot into TWRP little android guy appears.
What am I doing wrong?
Click to expand...
Click to collapse
after you flash TWRP, if you reboot, the system will flash the stock recovery back if its not the original
after u flash TWRP, u need to boot into recovery, and then flash the expected SuperSU.zip
the supersu zip script will edit the system and disable the flashing of stock recovery

Related

Warning: Update to LRX21Q fails when rooted.

Hi all,
on my Nexus 9, update to LRX21Q failed: After reboot, the android icon was shown with "error" below.
I suppose, update failed as my system is rooted with the method Chainfire posted in the development forum.
After an additional reboot, the previous firmware is still shown. The system does not offer the update anymore but claims to be up-to-date.
Any hints? Thanks in advance.
Maybe it's the modified kernel from Chainfire. Try to get back to the stock kernel and try again.
Download the factory image, flash recovery, boot, system & vendor.
Your software will be updated and you won't lose any data. You will lose root however.
I got the same error from OTA with no root. Only had 9 for 2 days, got OTA rite out of box no issue.
Yesterday for new build i get little error android icon upon reboot/install.
Obviously, something that is being changed by the "root" process is being checked DURING the update process. Probably a checksum on the boot partition. If it doesn't match, it bails on the update.
The likely reason for this is they acknowledge that you don't want to lose your root.
All it means is that you need to do the update manually.
It may be possible for a modified recovery to bypass this check, or possibly even be made to auto-root new boot images.
Thanks, guys. Will try as suggest above and post results.
Update: worked perfectly, needed to root again though.
StuMcBill said:
Download the factory image, flash recovery, boot, system & vendor.
Your software will be updated and you won't lose any data. You will lose root however.
Click to expand...
Click to collapse
has anyone tried this? i would like to update without losing data...
Flash through fastboot and you will be fine. Thats what I did then rerooted with CF autoroot
mk92595 said:
Flash through fastboot and you will be fine. Thats what I did then rerooted with CF autoroot
Click to expand...
Click to collapse
What's the fastboot command for the img? Do you flash as boot, system, etc?
zeebone said:
What's the fastboot command for the img? Do you flash as boot, system, etc?
Click to expand...
Click to collapse
Fastboot flash bootloader bootloader.img
Fastboot reboot-bootloader
Fastboot flash system system.img
Fastboot reboot-bootloader
Fastboot flash boot boot.img
Fastboot reboot-bootloader
Fastboot flash vender vendor.img
Fastboot reboot-bootloader
Fastboot erase cache
Fastboot flash cache cache.img
Fastboot reboot
Not sure if I forgot one but I think thats all of them
mk92595 said:
Fastboot flash bootloader bootloader.img
Fastboot reboot-bootloader
Fastboot flash system system.img
Fastboot reboot-bootloader
Fastboot flash boot boot.img
Fastboot reboot-bootloader
Fastboot flash vender vendor.img
Fastboot reboot-bootloader
Fastboot erase cache
Fastboot flash cache cache.img
Fastboot reboot
Not sure if I forgot one but I think thats all of them
Click to expand...
Click to collapse
Should there be a - sign between reboot and bootloader .. And is fastboot flash vender or vendor... Just making sure .
pantmunu said:
Should there be a - sign between reboot and bootloader .. And is fastboot flash vender or vendor... Just making sure .
Click to expand...
Click to collapse
Yes there should be a - sign and vendor. Sorry i'm not home so I don't have the files near me.
mk92595 said:
Yes there should be a - sign and vendor. Sorry i'm not home so I don't have the files near me.
Click to expand...
Click to collapse
Thank you sir .
Where can i find the images for download. Thx
Google for nexus factory image.
Sent from my Nexus 9 using XDA Premium HD app
Update failed on me too. Completely stock
UPDATE:
Apparently *some* devices didn't get the recovery updated with the last update (LRX21L).
The new update (LRX21Q) requires the newer version of the recovery to install.
Google really messed up the launch of the Nexus 9 with all the HW/SW quality control issues
Serious f#ck-up from Google really
Interesting thing I noticed: I restored factory images manually in order to unroot and the OTA was no longer available. I verified I was still running on L. I manually installed the update and it went in just fine.
Now waiting on the root package to be updated for the Q kernel. You can re-root but you will be running on the L kernel, not the Q kernel.
maarten08 said:
Update failed on me too. Completely stock
Click to expand...
Click to collapse
My too fck Google
Mine failed and Im not even rooted
And im not sure if it did the update as its not showing a new one. Im on L

Losing root after rebooting (6.0.1 with SuperSU 2.61 & 2.62)

I've been trying to get help on this matter. I've followed every step to get this resolved other than a factory restore at this point.
GloriousGlory said:
I've been trying to get help on this matter. I've followed every step to get this resolved other than a factory restore at this point.
Click to expand...
Click to collapse
Tell us more. What ROM are you running? Are you on 6.0 or 6.0.1? If on 6.0.1 tells us how you got there. It's the little things that help.
Mr Patchy Patch said:
Tell us more. What ROM are you running? Are you on 6.0 or 6.0.1? If on 6.0.1 tells us how you got there. It's the little things that help.
Click to expand...
Click to collapse
I'm on Stock 6.01. I flashed everything from fastboot (boot.img, bootloader, cache.img, radio, recovery.img, system.img, twrp.img, and vendor.img) and afterwards I went directly into recovery (twrp) and flashed supersu 2.62.
Process:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
Then did fastboot flash recovery twrp.img
Boot directly into recovery, flash supersu 2.62, reboot system (DO NOT INSTALL).
Everything works GREAT, then you reboot (power off) and lose root. have to boot into recovery and reflash supersu every single time.
GloriousGlory said:
I'm on Stock 6.01. I flashed everything from fastboot (boot.img, bootloader, cache.img, radio, recovery.img, system.img, twrp.img, and vendor.img) and afterwards I went directly into recovery (twrp) and flashed supersu 2.62.
Process:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
Then did fastboot flash recovery twrp.img
Boot directly into recovery, flash supersu 2.62, reboot system (DO NOT INSTALL).
Everything works GREAT, then you reboot (power off) and lose root. have to boot into recovery and reflash supersu every single time.
Click to expand...
Click to collapse
If I'm seeing this correctly, it looks like you didn't flash userdata? So you won't lose data correct?
Maybe you should try flashing this first, http://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459
then flash 2.61. See what happens.
Mr Patchy Patch said:
If I'm seeing this correctly, it looks like you didn't flash userdata? So you won't lose data correct?
Maybe you should try flashing this first, http://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459
then flash 2.61. See what happens.
Click to expand...
Click to collapse
I'll give it a try.
Edit: Didn't work
Ok it's strange, on some reboots its fine on some it unroots.
GloriousGlory said:
Ok it's strange, on some reboots its fine on some it unroots.
Click to expand...
Click to collapse
What's telling you it's not rooted?
Mr Patchy Patch said:
What's telling you it's not rooted?
Click to expand...
Click to collapse
Supersu app "There is no SU binary installed"
Okay so first reboot lost root. second boot good, third boot good, fourth boot lost root, fifth boot good.
I'm seeing the same. After flashing 2.62-3, root is fine on 1st and 2nd boot. After that, "...no SU binary installed". Tried reflashing 2.62-3, same results.
snovvman said:
I'm seeing the same. After flashing 2.62-3, root is fine on 1st and 2nd boot. After that, "...no SU binary installed". Tried reflashing 2.62-3, same results.
Click to expand...
Click to collapse
Same here. On 6.0.1
Sent from my Nexus 6P using Tapatalk
For those who are seeing this issue, what was the disposition of your phone prior to this?
For me, I was on 6.0.0 using traditional root (2.52). I fastbooted to 6.0.1 and used 2.62, then 2.62-3 right on top.
I'm in the process of re-fastbooting boot.img, system.img and flashing 2.62-3 to see if it makes a difference.
You need to run the unroot zip before you use the systemless.
Gytole said:
You need to run the unroot zip before you use the systemless.
Click to expand...
Click to collapse
I thought unroot.zip was used for those that were using traditional (2.52 and pre) root? AFAIK, the zip simply removes the pieces left by system root. If there was nothing written to /system in the first place, what benefit would unroot.zip provide? The OP did flash unroot.zip and it didn't help him.
In this post, the instructions explain that if you're coming from 2.60, you can simply flash newer versions right on top (since nothing was written to /system in the first place). If you're coming from system root, reflashing the image will wipe out all the root modifications and allowing one to go systemless.
I did reflash boot and system, then 2.62-3. Same problem--on the 3rd boot, root goes away.
snovvman said:
I thought unroot.zip was used for those that were using traditional (2.52 and pre) root? AFAIK, the zip simply removes the pieces left by system root. If there was nothing written to /system in the first place, what benefit would unroot.zip provide? The OP did flash unroot.zip and it didn't help him.
In this post, the instructions explain that if you're coming from 2.60, you can simply flash newer versions right on top (since nothing was written to /system in the first place). If you're coming from system root, reflashing the image will wipe out all the root modifications and allowing one to go systemless.
I did reflash boot and system, then 2.62-3. Same problem--on the 3rd boot, root goes away.
Click to expand...
Click to collapse
Didja flash the modified 29M boot img or the stock from factory img...
Gytole said:
Didja flash the modified 29M boot img or the stock from factory img...
Click to expand...
Click to collapse
The purpose of systemless root SuperSU is to patch the factory boot image. A modified boot image is used to allow for system root. This thread is discussing systemless root using SuperSU to patch the factory image. As the OP described, we are flashing the factory image. Don't know what you're asking.
snovvman said:
The purpose of systemless root SuperSU is to patch the factory boot image. A modified boot image is used to allow for system root. This thread is discussing systemless root using SuperSU to patch the factory image. As the OP described, we are flashing the factory image. Don't know what you're asking.
Click to expand...
Click to collapse
I had a problem before flashing the modified for some reason. But never mind.
See my post here. I found the modified kernel to allow for system root. Until the lost of root issue is resolved, system root is a good alternative.
Just fastboot the modified boot, reboot into TWRP (using the phone keys, NOT fastboot reboot), flash SuperSU 2.52, and you should be good to go. Be sure to backup beforehand and wipe cache/dalvik for good measure.

Unable to update OTA since repair - alternatives?

Hi all,
To cut a long story short, around the time MM was being released I cracked my display and broke the digitiser. Before sending the phone off for repair I got the update notification -.- but sent it away without updating as I couldn't accept it. Phone returned and working but no OTA notification, factory reset a few times, sim out and try again, all the usual tricks. They flashed my phone in the factory (came back wiped) and for some reason this firmware isn't getting the OTA update.
So after persevering with Lollipop (and cracking the display again, and fixing it myself this time) I'm getting Marshmallow one way or another. I just would like to know the best way.
I'd rather keep everything as stock as possible (in terms of bootloaders and rooting) and my current plan was to flash TWRP and try running a MM OTA file. I'm just looking to verify this would work and if so, any pitfalls (future OTAs) or things that could go horribly wrong by doing something idiotic.
I'm on an EU XT1572 so I'm assuming a general EU OTA file will work?
Thanks in advance for any assistance,
Phil
clarkey586 said:
Hi all,
To cut a long story short, around the time MM was being released I cracked my display and broke the digitiser. Before sending the phone off for repair I got the update notification -.- but sent it away without updating as I couldn't accept it. Phone returned and working but no OTA notification, factory reset a few times, sim out and try again, all the usual tricks. They flashed my phone in the factory (came back wiped) and for some reason this firmware isn't getting the OTA update.
So after persevering with Lollipop (and cracking the display again, and fixing it myself this time) I'm getting Marshmallow one way or another. I just would like to know the best way.
I'd rather keep everything as stock as possible (in terms of bootloaders and rooting) and my current plan was to flash TWRP and try running a MM OTA file. I'm just looking to verify this would work and if so, any pitfalls (future OTAs) or things that could go horribly wrong by doing something idiotic.
I'm on an EU XT1572 so I'm assuming a general EU OTA file will work?
Thanks in advance for any assistance,
Phil
Click to expand...
Click to collapse
Easy-peasy.
*NOTE - Using TWRP to flash the OTA.zip IS NOT an option, it WILL fail. You can however use the stock recovery and ADB sideload it.. but the following is how I would probably do it. It's also easier IMO.
I'm assuming your bootloader is unlocked since you were talking about using TWRP so grab the WHOLE 6.0 firmware for your phone (I'm guessing your're RETEU so -> XT1572_CLARK_RETEU_6.0_MPHS24.49-18-3_cid7_subsidy-DEFAULT_CFC.xml.zip - It's 1.3GB in size) and then reboot the phone into the bootloader (Fastboot mode) and use the files in it to flash everything (this process will wipe the phone so backup anything important first) with fastboot and you will be on a clean completely stock 6.0 with the february patch.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Standalone Fastboot & adb installer - LINK
WHOLE Firmware - LINK
Good luck! If your bootloader is not already unlocked and you don't want to unlock it there is still hope.. it will just be a bit different process by using the OTA zips and the stock recovery.. let me know if you MUST go down this route.. it's a bit more of a PITA IMO.
EDIT* If terminal commands are not your thing you can also try using RSDLite.(Official Moto tool). but I've not personally tried it with my Moto X Pure... I like the terminal
DaMadOne said:
Easy-peasy.
*NOTE - Using TWRP to flash the OTA.zip IS NOT an option, it WILL fail. You can however use the stock recovery and ADB sideload it.. but the following is how I would probably do it. It's also easier IMO.
I'm assuming your bootloader is unlocked since you were talking about using TWRP so grab the WHOLE 6.0 firmware for your phone (I'm guessing your're RETEU so -> XT1572_CLARK_RETEU_6.0_MPHS24.49-18-3_cid7_subsidy-DEFAULT_CFC.xml.zip - It's 1.3GB in size) and then reboot the phone into the bootloader (Fastboot mode) and use the files in it to flash everything (this process will wipe the phone so backup anything important first) with fastboot and you will be on a clean completely stock 6.0 with the february patch.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Standalone Fastboot & adb installer - LINK
WHOLE Firmware - LINK
Good luck! If your bootloader is not already unlocked and you don't want to unlock it there is still hope.. it will just be a bit different process by using the OTA zips and the stock recovery.. let me know if you MUST go down this route.. it's a bit more of a PITA IMO.
EDIT* If terminal commands are not your thing you can also try using RSDLite.(Official Moto tool). but I've not personally tried it with my Moto X Pure... I like the terminal
Click to expand...
Click to collapse
Thanks a million.
I've not unlocked my bootloader, but I don't think it should be a problem there's plenty of tutorials etc for that.
Ideally, I'd not like to wipe my phone but alas it looks like that's going to be the case and I'll trust your advice rather than looking for a lazy way out haha. Is there any way to back up everything (even just apps, etc) without root though?
Cheers :good:
clarkey586 said:
Thanks a million.
I've not unlocked my bootloader, but I don't think it should be a problem there's plenty of tutorials etc for that.
Ideally, I'd not like to wipe my phone but alas it looks like that's going to be the case and I'll trust your advice rather than looking for a lazy way out haha. Is there any way to back up everything (even just apps, etc) without root though?
Cheers :good:
Click to expand...
Click to collapse
Yea, your warranty is void at this point anyways so why not just unlock it! I root and use TiBu.. so I've not tested other backup methods but I'm pretty sure there are backup apps on the playstore that don't require root you could try.
BUT, the step "fastboot erase userdata" is what erases your installed apps/setting and personal files, etc. Really you can just SKIP that step and you SHOULD be ok. Then your apps and settings will be there when you boot 6.0. I was just providing instructions for a fully clean flash. I would say you have a 98% chance it will be just fine though if you don't erase userdata.
EDIT* oh and IIRC you will probably get an error or weird msg with the gpt.bin part of the flash.. ignore it..
EDIT 2* Here is one such app that doesn't look like it requires root. If you go this route make sure you copy everything over to your PC after using the backup app if you are going to run the "fastboot erase userdata" command.
GOOD LUCK!
---------- Post added at 06:38 PM ---------- Previous post was at 06:07 PM ----------
Just out of curiosity.. I've just read some posts on here about people getting their phones back from repair and their bootloader says "Device is ENGINEERING" instead of "Device is LOCKED" or "Device is UNLOCKED".
What does yours say? I'm mainly just wondering if it being in ENGINEERING mode is why you are not getting the OTA...
DaMadOne said:
Yea, your warranty is void at this point anyways so why not just unlock it! I root and use TiBu.. so I've not tested other backup methods but I'm pretty sure there are backup apps on the playstore that don't require root you could try.
BUT, the step "fastboot erase userdata" is what erases your installed apps/setting and personal files, etc. Really you can just SKIP that step and you SHOULD be ok. Then your apps and settings will be there when you boot 6.0. I was just providing instructions for a fully clean flash. I would say you have a 98% chance it will be just fine though if you don't erase userdata.
EDIT* oh and IIRC you will probably get an error or weird msg with the gpt.bin part of the flash.. ignore it..
EDIT 2* .... is one such app that doesn't look like it requires root. If you go this route make sure you copy everything over to your PC after using the backup app if you are going to run the "fastboot erase userdata" command.
GOOD LUCK!
---------- Post added at 06:38 PM ---------- Previous post was at 06:07 PM ----------
Just out of curiosity.. I've just read some posts on here about people getting their phones back from repair and their bootloader says "Device is ENGINEERING" instead of "Device is LOCKED" or "Device is UNLOCKED".
What does yours say? I'm mainly just wondering if it being in ENGINEERING mode is why you are not getting the OTA...
Click to expand...
Click to collapse
Haha suppose you're right! Sure I'll probably just wipe my device in the end, be nice to have a clean go at MM haha.
The bootloader status was indeed locked so I don't know what's causing the issue?
Anyway, thanks a million for the help I'll update if/when all goes well :good:
Despite my best efforts, it seems to have been in vain. I'm getting an error when trying to unlock the bootloader (something along the lines of no backup available, please try again) which is common to people who have sent their phone in for repair.
I'm just wondering if I could flash the firmware regardless of bootloader (Odin maybe?) At this point I'm happy to root suit and boot I'm just a bit sick of moto at this stage so want to be able to control my phone haha.
Any help much appreciated
clarkey586 said:
Despite my best efforts, it seems to have been in vain. I'm getting an error when trying to unlock the bootloader (something along the lines of no backup available, please try again) which is common to people who have sent their phone in for repair.
I'm just wondering if I could flash the firmware regardless of bootloader (Odin maybe?) At this point I'm happy to root suit and boot I'm just a bit sick of moto at this stage so want to be able to control my phone haha.
Any help much appreciated
Click to expand...
Click to collapse
Odin is for Samsung. Moto has RSDLite. But if your bootloader is locked the firmware package must be signed by Moto and I don't thing the ones floating around the web are.
So this is the point where it seems you're stuck with the (possibly) more PITA way. What you need to do is find the OTA zip that goes from 5.1.1 -> 6.0 and use the stock recovery to flash that with ADB. Boot to stock recovery, press button sequence to get the menu (I THINK at the fallen android dude you hold vol up for a few seconds then hit the power button while still holding it.. it's something like that to get the actual useful menu) then towards the bottom is an update via ADB, plug phone into pc via usb and select that and then in terminal do "adb sideload <OTA_file>.zip" and it will flash the OTA, assuming your device passes it's check it will feel like it's taking forever. This method won't wipe your phone either.
EDIT* HERE is a post with a link to the EU OTA and much better instructions than mine You can flash it with adb sideload or like that post says by copying it to your phone before booting the recovery and flashing it.
And then.. assuming you get to 6.0 using that OTA hopefully you can trigger the february OTA to auto download. If not... HERE is a link to a post with the february OTA zip for your phone. Flash it the same as last one.
If flashing the OTA with a locked bootloader and stock recovery doesn't work I'm afraid you're either stuck or your phone is on a return path to Moto again.
DaMadOne said:
Odin is for Samsung. Moto has RSDLite. But if your bootloader is locked the firmware package must be signed by Moto and I don't thing the ones floating around the web are.
So this is the point where it seems you're stuck with the (possibly) more PITA way. What you need to do is find the OTA zip that goes from 5.1.1 -> 6.0 and use the stock recovery to flash that with ADB. Boot to stock recovery, press button sequence to get the menu (I THINK at the fallen android dude you hold vol up for a few seconds then hit the power button while still holding it.. it's something like that to get the actual useful menu) then towards the bottom is an update via ADB, plug phone into pc via usb and select that and then in terminal do "adb sideload <OTA_file>.zip" and it will flash the OTA, assuming your device passes it's check it will feel like it's taking forever. This method won't wipe your phone either.
EDIT* HERE is a post with a link to the EU OTA and much better instructions than mine You can flash it with adb sideload or like that post says by copying it to your phone before booting the recovery and flashing it.
And then.. assuming you get to 6.0 using that OTA hopefully you can trigger the february OTA to auto download. If not... HERE is a link to a post with the february OTA zip for your phone. Flash it the same as last one.
If flashing the OTA with a locked bootloader and stock recovery doesn't work I'm afraid you're either stuck or your phone is on a return path to Moto again.
Click to expand...
Click to collapse
Ah sure I'll give that a go! Just checking if there are any precautions I should be taking for this? Don't want to brick the phone without the ability to flash it back to life again!
clarkey586 said:
Ah sure I'll give that a go! Just checking if there are any precautions I should be taking for this? Don't want to brick the phone without the ability to flash it back to life again!
Click to expand...
Click to collapse
You should be fine. The OTA zip is going to check all of the files it is going to patch first and only upgrade if everything passes. If it finds ANYTHING amiss... it will refuse to flash it. If it refuses to flash it your only hope is to send it to Moto unfortunately.
DaMadOne said:
You should be fine. The OTA zip is going to check all of the files it is going to patch first and only upgrade if everything passes. If it finds ANYTHING amiss... it will refuse to flash it. If it refuses to flash it your only hope is to send it to Moto unfortunately.
Click to expand...
Click to collapse
You, my friend, are a hero.
That seems to have done the trick with no issues (going to see if I can potentially unlock the bootloader now) and I'm finally on MM haha. Seems I have to perform the Feb security update separately too for some reason but I'm not too worried about doing things manually.
Sent you a small token of my appreciation, have a pint on me
Thanks once again
clarkey586 said:
You, my friend, are a hero.
That seems to have done the trick with no issues (going to see if I can potentially unlock the bootloader now) and I'm finally on MM haha. Seems I have to perform the Feb security update separately too for some reason but I'm not too worried about doing things manually.
Sent you a small token of my appreciation, have a pint on me
Thanks once again
Click to expand...
Click to collapse
Sweet! Thanks for the pint! Glad you're updated now. Did it end up giving you the OTA for the February patch or did you have to use the 2nd OTA?
DaMadOne said:
Sweet! Thanks for the pint! Glad you're updated now. Did it end up giving you the OTA for the February patch or did you have to use the 2nd OTA?
Click to expand...
Click to collapse
Had to use the 2nd OTA.zip but I didn't really try any of the remove sim card stuff or waiting long. No unlockable bootloader either but I'm satisfied for the moment haha.

help soft bricked stuck on animation tried many things no luck

as the tittle says... i am soft-bricked, stuck on google animation.. I did a install of the full android rom 1.4 from zulu99 and everything worked like a champ but i wanted to go back to stock for the kids and now i am stuck
I can access fastboot and recovery on the device and compute recognizes it also..
I downloaded the stock image for marsh 3.2.0 and i flashed all the required files:
fastboot flash staging blob
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot reboot
it reboots and goes to the google animation and it just stays there!!!(left it there for a day!!!) i also tried to flashing fastboot flash tegra210-foster-e-p2530-0930-e02-00.dtb and did not fix it..
also tried to flash 3.1.0 same steps and no go... i know my adb files are up to date... any ideas?
I was able to flash full android 1.4 from zulu again and works like a champ but i need stock for the kiddos.
try flashing twrp recovery from there wipe system and data partition then reboot into fastboot flash 3.2 again
i was stuck at the boot animation about a month ago after the 3.2 update.... see my post in this thread:
http://forum.xda-developers.com/shi...ion-screen-t3263143/post67564062#post67564062
please note: i used the 3.1 recovery image because the 3.2 image had not been released yet. have not tried it with the newer 3.2 image
also, if you follow my post and install the 3.1 image....be sure to flash the files in the order posted! some will flash quickly, but one or two took awhile to complete, so be patient and wait for each step to finish before moving on to the next.
yes, i saw ur post and how you solved it and i did try the same thing and it did not fix it.. it just gets me to the animation screen... i am gonna try to load twrp from fastboot, wipe.. then re install everything and once done, i will try to fastboot -w and see if that helps me...
foomanjackel said:
i was stuck at the boot animation about a month ago after the 3.2 update.... see my post in this thread:
http://forum.xda-developers.com/shi...ion-screen-t3263143/post67564062#post67564062
please note: i used the 3.1 recovery image because the 3.2 image had not been released yet. have not tried it with the newer 3.2 image
also, if you follow my post and install the 3.1 image....be sure to flash the files in the order posted! some will flash quickly, but one or two took awhile to complete, so be patient and wait for each step to finish before moving on to the next.
Click to expand...
Click to collapse
lalord69 said:
yes, i saw ur post and how you solved it and i did try the same thing and it did not fix it.. it just gets me to the animation screen... i am gonna try to load twrp from fastboot, wipe.. then re install everything and once done, i will try to fastboot -w and see if that helps me...
Click to expand...
Click to collapse
if you un pack the nvidia recovery image there is a scipt inside caled flashall.bat one of the steps run in there is a reboot to fastboot after you flash the boot.image
flash staging blob
fastboot flash boot boot.img
fastboot reboot
adb wait-for-device
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot reboot
echo Press any key to exit...
pause >nul
exit

Moto X Pure XT1575 Stuck at bootloader unlocked screen and stuck at twrp logo

So i was recording a video, when it entered a state where I had to reboot the phone. I did so, and it got stuck. I did a hard reset. The phone then gets stuck at bootloader unlocked. I entered fastboot, selected recovery, and it gets stuck at the twrp logo. Any ideas? I also re-flashed twrp and it still get stuck.
Can you boot TWRP with 'fastboot boot twrp.img' and do anything? (Replace 'twrp.img' with your TWRP image filename)
If not, try fastboot flashing back to stock, but it kind of sounds like your emmc (internal storage chip) might have take a dump. Very unusual, but not unheard of.
acejavelin said:
Can you boot TWRP with 'fastboot boot twrp.img' and do anything? (Replace 'twrp.img' with your TWRP image filename)
If not, try fastboot flashing back to stock, but it kind of sounds like your emmc (internal storage chip) might have take a dump. Very unusual, but not unheard of.
Click to expand...
Click to collapse
I used a restore-to-stock tool. It didn't actually restore me to stock. I have NO CLUE what it did, but suddenly i saw my custom boot animation again, and was able to boot into twrp, altough my nandroids are gone. I flashed a rom, and it didn't recognize the sim card. I flashed a new rom, and it recognizes the card, but i get no service (in my house where i always get service). Any ideas?
thebaconbox said:
I used a restore-to-stock tool. It didn't actually restore me to stock. I have NO CLUE what it did, but suddenly i saw my custom boot animation again, and was able to boot into twrp, altough my nandroids are gone. I flashed a rom, and it didn't recognize the sim card. I flashed a new rom, and it recognizes the card, but i get no service (in my house where i always get service). Any ideas?
Click to expand...
Click to collapse
This is why one-click tools are bad... You need to flash the full stock image manually, and not downgrade, you must use the same or newer version of stock firmware than you device last had installed.
acejavelin said:
This is why one-click tools are bad... You need to flash the full stock image manually, and not downgrade, you must use the same or newer version of stock firmware than you device last had installed.
Click to expand...
Click to collapse
How do I do that?
thebaconbox said:
How do I do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
acejavelin said:
http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
Click to expand...
Click to collapse
Could I just flash the NON-HLOS.bin modem in fastboot and nothing else?
thebaconbox said:
Could I just flash the NON-HLOS.bin modem in fastboot and nothing else?
Click to expand...
Click to collapse
No, I don't think so, but you could do it like this:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin (optional)
acejavelin said:
No, I don't think so, but you could do it like this:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin (optional)
Click to expand...
Click to collapse
And i can do this with twrp installed and the pure nexus custom rom installed and it should work just fine?
thebaconbox said:
And i can do this with twrp installed and the pure nexus custom rom installed and it should work just fine?
Click to expand...
Click to collapse
Yes
acejavelin said:
Yes
Click to expand...
Click to collapse
Alright, I flashed everything and my cell service now works flawlessly.
thebaconbox said:
Alright, I flashed everything and my cell service now works flawlessly.
Click to expand...
Click to collapse
Awesome!
hy,
my purenexus rom was running perfectly but today i was installing spotify and it hanged and then i had to retsart but now it stucks on bootloader warning screen .recvory also stucks on twrp logo . now what should i do .i googled and found this thread.please guide me which thread do i need to follow ..will my bootloader get locked again ? where do i have to start it from? i also have nandroid backup of previous custom rom which is truepure rom. please guide me.
Flash(with fastboot) again twrp(wipe system, cache, data, dalvik) and restore your backup. @azzammalik
dzidexx said:
Flash(with fastboot) again twrp(wipe system, cache, data, dalvik) and restore your backup. @azzammalik
Click to expand...
Click to collapse
if i flash twrp again then it would stuck again on twrp logo as this op suggested . by flashing through fastboot you meant stock firmware then can you please guide me which file i have to download so i can just flash it using fastboot. and is there any way so i dont loose my data thanks
azzammalik said:
if i flash twrp again then it would stuck again on twrp logo as this op suggested . by flashing through fastboot you meant stock firmware then can you please guide me which file i have to download so i can just flash it using fastboot. and is there any way so i dont loose my data thanks
Click to expand...
Click to collapse
Only with twrp you can save your data.
What version did you used? Try with another, maybe don't flash - only boot.
"fastboot boot NameOfTwrp.img"
If it boot copy your data to pc.
Stock you can flash with fastboot, here is "how to", download and flash the highest version for you model:
https://forum.xda-developers.com/mo...de-return-to-stock-relock-bootloader-t3489110
Read carefully, don't lock bootloader.

Categories

Resources