Related
When I have my nexus one set to automatically adjust brightness, it doesn't seem to do anything.
I can move it between dark and bright environments and the screen brightness doesn't seem to change at all. Am I missing something or is this feature not working on my phone?
It works fine with mine. I just clicked auto in the brightness setting. Make sure you didn't accidentally change it to a different setting with the settings widget that is by default on the first home page to the right.
works fine on mine yet not a feature i use....i just set it statically.
I find the auto-brightness to be too dim for my liking. It would be great if you could adjust the overall brightness while still maintaining the automatic scaling.
Turns out it does work, it just need to be *really* bright to make it change.
It doesn't change really at all in my office between switching the lights on and off (even though that's a really big change in light levels to me). However, if i go outside, it does get brighter.
As you say though, it does seem to be set a bit low (hence it not brightening up when my office lights are turned on I guess).
If I enable auto-brightness on mine, it seems to constantly vary the brightness in my office. It's annoying as crap and I turned it off. Am I the only one?
It's probably taking a look at the available APIs to see if it's easy to write a quick app to do auto brightness with settings to be able to tweak it.
The auto-brightness feature changes constantly for me as well.
I 'm also having issues of the varying brightness when using auto-brightness -- even though the lighting in my environment has not changed and I avoid contact with the light sensor. It's VERY annoying.
I've since switched to using a static setting for the brightness.
auto brightness was one of the first things i turned off. it was way too dim for me
Not bright enough for me. Doesnt seem to change much.
I do see the variability occasionally. Most of the time it's stable, but it will take spells of shifting up and down repeatedly. Glad to know I'm not alone.
Auto bright annoyed me as well when I first got the phone. Then I realized where the sensor is (top left) and what it was responding to. Depending on where I'm sitting, what light sources are behind me, in front of me but reflecting off of me. It's usually just responding to a light source that's just withing view of its sensor. Also, my hand has shielded the sensor more than just a few times, confusing the sensor.
Now I leave auto bright on all the time, and it more often than not does a good job.
IMHO this is one of the few broken features on the phone. In continuous lighting it jumps from bright to dim to everything in between like a jack rabbit on speed. I still use it to save battery life but it pisses me off regularly.
am also having this problem. it constantly goes much brighter, and then, suddenly goes back to dim.. very annoying... however, the light sensor for calling works well... so, is it a software issue.. hope it gets google's attention and gets fixed in next update...
Bicster_ said:
If I enable auto-brightness on mine, it seems to constantly vary the brightness in my office. It's annoying as crap and I turned it off. Am I the only one?
Click to expand...
Click to collapse
+1 so I also manually go between three on the widget
Note that the light sensor is under the glass on the front of the phone. Some cover-all cases cover this, and if you use one of these I assume your phone will remain on the dimmest setting.
In general, while indoors it will remain on the dimmest setting (for me anyway), but rise to the necessary full brightness when in sunlight.
w00yee said:
am also having this problem. it constantly goes much brighter, and then, suddenly goes back to dim.. very annoying... however, the light sensor for calling works well... so, is it a software issue.. hope it gets google's attention and gets fixed in next update...
Click to expand...
Click to collapse
There are two sensors, one is a light sensor and the other is a proximity sensor to detect when you've taken the phone from your ear. I think you're referring to the second.
w00yee said:
am also having this problem. it constantly goes much brighter, and then, suddenly goes back to dim.. very annoying... however, the light sensor for calling works well... so, is it a software issue.. hope it gets google's attention and gets fixed in next update...
Click to expand...
Click to collapse
+1 constant occiliation on dimmness levles under consistant light. It goes from way too dim, to just right then back dark again. I too hope that google will correct this with the next update. Hopefully the patch gets pushed soon, i'd like that extra memory
I am currently running JPA/JPB Hybrid firmware and I was wondering if there even is a sensor for the auto-brightness.
Normaly I have set my brightness to the lowest level, which is enough for indoor usage. But as soon as I am outdoors in the sunlight I can't even tell if the display is on or off with this brightness level.
Now the strange thing about this is that it does not seem to make a difference whether you check the "Power saving mode" in the Display settings or not - the Display brightness always stays the same:
- with the highest level it does not get darker in very dark rooms to save battery
- with the lowest level it does not get brighter even in direct sunlight, which makes the display unusable
On the left of the Samsung-logo there are 2 "holes", I guess one must be the proximity sensor and the other one the brightness sensor?
Is there any way to have the brightness on a very low level in dark rooms and on a high level in bright rooms / outdoor WITHOUT switching manually? Even switching with a widget sucks, because outdoors the display is so dark that I can't even draw the pattern to unlock the screen first (at least not without covering the display from the sunlight)
If there is I think the driver is missing so it's useless.
There is a brigness sensor, not for auto adjusting the screen brighness, for example try *#0*# and press sensor, now if you put you finger on the sensor, you phone vibrates, it means it is dark, if your finger is not on the sensor, it says, its brighten outside, that is for example to telephone, the screen goes dark, when you put the phone to your ears
"that is for example to telephone, the screen goes dark, when you put the phone to your ears"
No, that's the proximity sensor, and I think there is no light sensor in SG3, because that test app shows only proximity, accelerometer and magnetic sensor.
rueolps said:
Now the strange thing about this is that it does not seem to make a difference whether you check the "Power saving mode" in the Display settings or not - the Display brightness always stays the same:
- with the highest level it does not get darker in very dark rooms to save battery
- with the lowest level it does not get brighter even in direct sunlight, which makes the display unusable
Click to expand...
Click to collapse
Power Saving is not for dynamically change the strenght of backlight. It's just turning to lowest level when your battery is 15% and less.
And there is 2 holes, for proximity sensor. Try to cover one hole, and it doesn't work. Why? Because 1 hole sending an infrared (I think...) wave, and second is receiving that back, from eg., your hand.
JoHnNy08PL said:
Power Saving is not for dynamically change the strenght of backlight. It's just turning to lowest level when your battery is 15% and less.
And there is 2 holes, for proximity sensor. Try to cover one hole, and it doesn't work. Why? Because 1 hole sending an infrared (I think...) wave, and second is receiving that back, from eg., your hand.
Click to expand...
Click to collapse
totaly makes sense - thank you very much!
I got my S4 last week and it's great. This one doesn't have any lag, or at least not anything that concerns me. However, it does have screen issues, especially with the light adjustment. Sometimes the screen will randomly go full brightness for a second and then go back to normal, I notice this when accessing messaging sometimes. I know it also does this for Instagram, but it is suppose to do that.
Now, sometimes it seems like it does a colorshift. the screen will appear less blue and more yellow. It did this when I was accessing the facebook messenger app once and maybe another one. I might be making this up, but it just seems like the color changes ever so slightly. Also, once in a blue moon when it is adjusting screen brightness, all these vertical black lines appear for a microsecond on certain parts of the screen, it seems like an even distribution of lines. Reminds me of something old game boys might do.
I am very happy with the phone though, and I don't want to switch it if I don't have too. However, if another version might not have these issues, I want to switch ASAP, I only have a week left to swap for a new one. After that, my 14 days are up and they said they would only give me refurbs. :[
Do it.
I'm stuck with a defective screen 16GB because the 32GB did not come in on launch day which was my last day to return.
My only option at this point is to get another 16GB that's refurbished from warranty.
The irony in all this is that I manage the kiosk where I purchased the phone on my personal account.
My employees' phones and demo don't have the same screen issues I have.
Sent from my SAMSUNG-SGH-I337 using xda premium
There is a setting in accessibility that called color adjusment mess with that and see if that helps it
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I will check out the settings. The events that this glitches happen are rare, but it has only been a week and they have happened numerous times. The auto lighting adjustment sucks, times when it should be bright it's not. Plus the black line stuff that happens sometimes. If all of them experience this I dont want to trade in for another one. I don't want to risk trading my working phone for one that won't work so well.
DuffmasterFresh said:
I will check out the settings. The events that this glitches happen are rare, but it has only been a week and they have happened numerous times. The auto lighting adjustment sucks, times when it should be bright it's not. Plus the black line stuff that happens sometimes. If all of them experience this I dont want to trade in for another one. I don't want to risk trading my working phone for one that won't work so well.
Click to expand...
Click to collapse
I would swap it if I were you.. I came from the HTC one because of repeated problems and switched to the s4... I've only had it a few days now but have only experienced some lag (fixed by tweaking settings) and the auto brightness is a little slow to adjust sometimes (I've always though this about all my Samsung devices).. But no color changing or bars appearing.. Just my 2 cents..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
that is partially due to the type of color meter and ambient light sensor type (should be a 40-something segment black and white unless my info on the sensor specs are off. i believe apple has designed a proprietary multisegment rgb meter for theirs). b/w meters get lumens correct, but not perceived brightness (human eye is not the same as a sensor).
the color changing issue you are having may be due to the display mode being set on auto (start, settings, display mode) and under lighting that the sensor cannot correctly meter for (fluorescent lights flicker at the same hertz as your AC current, and are actually pretty dim and WAY off for color balance, so that SHOULD throw the sensors off continuously, which would lead to auto brightness hunting and inaccurate selection of the 'correct' color mode).
try turning auto brightness off and color mode to professional photo or movie (i use move as its very flat and closer to real colors). there ought to be a way to trick the ambient brightness sensor to sample and average at a faster rate, and ramp up/down more smoothly, but i cant code for android otherwise i would have been working on one.
i work in tv/film industry on the sensor/lighting side btw. if the issue goes away, turn on auto brightness and check it out under NON FLUORESCENT lighting. if its gone, it was probably the display mode changing along with auto brightness.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Slade8525 said:
that is partially due to the type of color meter and ambient light sensor type (should be a 40-something segment black and white unless my info on the sensor specs are off. i believe apple has designed a proprietary multisegment rgb meter for theirs). b/w meters get lumens correct, but not perceived brightness (human eye is not the same as a sensor).
the color changing issue you are having may be due to the display mode being set on auto (start, settings, display mode) and under lighting that the sensor cannot correctly meter for (fluorescent lights flicker at the same hertz as your AC current, and are actually pretty dim and WAY off for color balance, so that SHOULD throw the sensors off continuously, which would lead to auto brightness hunting and inaccurate selection of the 'correct' color mode).
try turning auto brightness off and color mode to professional photo or movie (i use move as its very flat and closer to real colors). there ought to be a way to trick the ambient brightness sensor to sample and average at a faster rate, and ramp up/down more smoothly, but i cant code for android otherwise i would have been working on one.
i work in tv/film industry on the sensor/lighting side btw. if the issue goes away, turn on auto brightness and check it out under NON FLUORESCENT lighting. if its gone, it was probably the display mode changing along with auto brightness.
Click to expand...
Click to collapse
I had no idea the S4 had these options. I guess I am used to my Atrix which didnt do much. I went in and adjusted the settings. The auto screen brightness never really did a good job, I feel that it is way too dim in situations where it should be brighter. I will text your advice the next week and see what happens. If I still get issues, I will return it as I have one week left of my 14 days. Thank you very much for the excellent advice!
DuffmasterFresh said:
I had no idea the S4 had these options. I guess I am used to my Atrix which didnt do much. I went in and adjusted the settings. The auto screen brightness never really did a good job, I feel that it is way too dim in situations where it should be brighter. I will text your advice the next week and see what happens. If I still get issues, I will return it as I have one week left of my 14 days. Thank you very much for the excellent advice!
Click to expand...
Click to collapse
no problem; the auto brightness on the GS4 is only slightly better than the Atrix 4G (had one too), and same as the GS3. The color mode thing (which is awesome; closer to real life colors versus waaaay oversaturated screens on most phones. also check power saving settings.
also see this thread
http://forum.xda-developers.com/showthread.php?p=41616076#post41616076
Well, I have not seen those black lines since I turned off auto brightness and turned off the screen automatically doing it's own color adjustments. I will turn these back on to see if I can duplicate the issue. I do feel that I have more lag now, but I could just be paranoid.
OK, when I am using my Facebook Messenger App, sometimes these black lines appear horizontally across the screen on low brightness. However, sometimes they dont. I dont want to call them black lines, but maybe I should say they are ghostly tv lines that are barely noticeable. Ideas?
Could someone explain the defective screen issue?, mine looks great...
The phone works great most of the time and is totally useable, the only issue is that sometimes it does these weird things as I have explained. Tomorrow is the 14 day mark, so I am having a hard time deciding if I should switch for another one just in case, or assume all of this is normal and hope the phone lasts me 2 years.
DuffmasterFresh said:
The phone works great most of the time and is totally useable, the only issue is that sometimes it does these weird things as I have explained. Tomorrow is the 14 day mark, so I am having a hard time deciding if I should switch for another one just in case, or assume all of this is normal and hope the phone lasts me 2 years.
Click to expand...
Click to collapse
Could possibly be a GPU issue. Have you had any problems playing heavy duty 3d games?
Sent from my GT-N7100
No problems playing the Iron Man 3 game, everything seems fine.
It seems like any time the keyboard is pulled up, the screen shifts color to something more yellow. all of the keys go from a nice grey to a off grey yellow tint color. During this transition, I can literally see the screen transition as weird lines appear for a fraction of a second, like switching channels on an old TV. I tried recording this on my DSLR 1080P camera but it could not pick up the color change visibly. I might try again. It does this on Google Chrome, Facebook Messenger, Snap Chat even. sometimes it color shifts even when the keyboard is not involved. I have the auto adjustments on the screen off and the color set to Standard Mode.
The ATT store said I am a day out of my 14 day limit and there is nothing they can do. They said I have to talk to warranty and see if they will be nice enough to send me a new one. I dont want a refurb, last time that happened, I went through 4 of them. I talked to ATT support and they said they would extend my 14 days another 3 days but the ATT store said I was out of luck for an exchange for a new phone.
So no one elses screen color shifts to yellow when the keyboard pops up? Mine does this now all the time, mainly in low light. It might do it in all light situations but in sunlight I prolly just can't see it. It's incredibly annoying because the screen itself wacks out every time it does it.
Last night, I went to use my night clock app with my new LG v20. On my Note 7, the screen was totally 100% black except for the numbers.
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
(Note, this includes the 2nd screen which was also lit - and I had the brightness at 0%).
--
BTW, this may need to be a separate thread - on my phone I notice that the auto-brightness tends to be too dark. Any way I can adjust it to be brighter when in auto mode, or should I just go to manual ?
polstein said:
Last night, I went to use my night clock app with my new LG v20. On my Note 7, the screen was totally 100% black except for the numbers.
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
(Note, this includes the 2nd screen which was also lit - and I had the brightness at 0%).
--
BTW, this may need to be a separate thread - on my phone I notice that the auto-brightness tends to be too dark. Any way I can adjust it to be brighter when in auto mode, or should I just go to manual ?
Click to expand...
Click to collapse
Try turning off second screen and see what your results are.. Second screen has a seperate black light that slightly bleeds out to the rest of the screen. It was horrible on the V10 but much improved on the 20..
Swizzle82 said:
Try turning off second screen and see what your results are.. Second screen has a separate black light that slightly bleeds out to the rest of the screen. It was horrible on the V10 but much improved on the 20..
Click to expand...
Click to collapse
The night clock app has the option to turn off the notification, which also turns off the 2nd screen.
...oops. It did, until I followed your suggestion in the other thread about the more setting to enable time/date when in full screen or notification bar hidden. I'll have to get into the habit of turning *off* the more setting at night.
(Either way, doesn't help with the slight gray background color. I can probably just get used to it as long as I'm not damaging the screen by having it slightly on all night. I need to google if LCD screens have burn in problems I guess.)
--
Maybe I should just start pm'ing you all my questions
polstein said:
Last night, I went to use my night clock app with my new LG v20. On my Note 7, the screen was totally 100% black except for the numbers.
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
(Note, this includes the 2nd screen which was also lit - and I had the brightness at 0%).
--
BTW, this may need to be a separate thread - on my phone I notice that the auto-brightness tends to be too dark. Any way I can adjust it to be brighter when in auto mode, or should I just go to manual ?
Click to expand...
Click to collapse
I use this on all my phones since I feel stock auto is too dim. https://play.google.com/store/apps/details?id=com.velis.auto.brightness
polstein said:
The night clock app has the option to turn off the notification, which also turns off the 2nd screen.
...oops. It did, until I followed your suggestion in the other thread about the more setting to enable time/date when in full screen or notification bar hidden. I'll have to get into the habit of turning *off* the more setting at night.
(Either way, doesn't help with the slight gray background color. I can probably just get used to it as long as I'm not damaging the screen by having it slightly on all night. I need to google if LCD screens have burn in problems I guess.)
--
Maybe I should just start pm'ing you all my questions
Click to expand...
Click to collapse
Sent from my LG-H830 using Tapatalk
Use comfort view on low or medium. Will help lower the ~9000K color temp some and help blacks a hair. Faint glow is typical on LCDs. Higher quality LCDs and higher quality led's can help. Lg skimped here. Sucks they didn't even give us color modes to pick from. The colors are waaay off. But using comfort view dims the blue pixels and helps considerably.
polstein said:
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
Click to expand...
Click to collapse
That's just how LCD works, they need CCFL or LED back light to lit up the screen, it's not possible for it to be completely black while turned on. With AMOLED the individual pixels can turn off itself which is why the black are blacker on them. OLED screens also have very high refresh rates which eliminates flickering, this is good for people who are concerned with eyes health.
Lcd doesn't get burn in, but it can get ghost image retention. It was f***ing horrible by the end of my V10 usage.. Never had the problem on the G2 3 or 4. Just the V10, even after factory resetting.
Swizzle82 said:
Lcd doesn't get burn in, but it can get ghost image retention. It was f***ing horrible by the end of my V10 usage.. Never had the problem on the G2 3 or 4. Just the V10, even after factory resetting.
Click to expand...
Click to collapse
Had the same issue my V10, that is my biggest V20 concern. . My v10 was not even a year old.
I get the engineering and cost reasoning, but not sure I like the lcd screens.
I would like to tell you that it often happens when I pull the S10+ out of my pocket, so the display is not in "stand by" mode, it is not always on display, but it is slightly backlit. Classically, the display is black and shines only AOD. But when I pull it out of my pocket, instead of the classic AOD it shines for hours and even seconds and after them you can see the wallpaper of the locked display and it is slightly backlit. The display itself is dark, but it is slightly backlit and you can see the wallpaper. With the classic AOD, the display is completely black and I have set only hours, minutes, date and battery, and of course, the notification, if any. Does anyone know what it is, whether it can be turned off so that the display does not illuminate the pocket?
I have accidental touch protection on.
As far as I know proximity sensor is only accessible when you are in call, that's why other apps can't access it.
Samsung should remedy this. Because I always change the Always On setting in my pocket. Specifically - Rotation and Brightness Always On.
EDIT: It happens most when I tap wake-up.