Related
Hello i wrongly installed aosp s4 google edition 5.0 ,because i flashed gapps with it also which i shouldnt,and when it boots it says unfortunately,the process com.android.phone has stopped and im thinking that i should enter recovery mode and wipe and flash again without gapps but it wont go into recovery mode...i tried cmw recovery and twrp recovery but when i press the volume up and power buttons it says recovery booting but then it restarts,it did the same before but i entered recovery from an app,someone help me
No one ??
kidudub said:
No one ??
Click to expand...
Click to collapse
Hi mate ,
That is related to google syncing the contacs
go to
Go to
settings ->application manger -> all-> and clear data on contact and contact storage
or do a factory reset and flash rom again
kidudub said:
Hello i wrongly installed aosp s4 google edition 5.0 ,because i flashed gapps with it also which i shouldnt,and when it boots it says unfortunately,the process com.android.phone has stopped and im thinking that i should enter recovery mode and wipe and flash again without gapps but it wont go into recovery mode...i tried cmw recovery and twrp recovery but when i press the volume up and power buttons it says recovery booting but then it restarts,it did the same before but i entered recovery from an app,someone help me
Click to expand...
Click to collapse
Press the three button , when you see the first samsung logo , stop pressing the power button but keep pressing the up volume with the home button .
If this doesn't work , install rom manager from the play store , install from it the last CWM and boot in recovery from the app
guys,i cant acces my phone,after it boots it goes into that error
kidudub said:
guys,i cant acces my phone,after it boots it goes into that error
Click to expand...
Click to collapse
Okay , we will try the hard way then .
Download the last stock firmware , boot into download mode , open odin , plug your device , flash the firmware with odin .
Choose the file in odin from " PDA" .
Soufiansky said:
Press the three button , when you see the first samsung logo , stop pressing the power button but keep pressing the up volume with the home button .
If this doesn't work , install rom manager from the play store , install from it the last CWM and boot in recovery from the app
Click to expand...
Click to collapse
Dude thank you so much,thats why it didnt go into recovery mode... thank you so much
No problem men , glad i could help
https://dl.twrp.me/j7ltespr/
Here it is!
Now all we need is a ROM!
creativetrendz said:
Now all we need is a ROM!
Click to expand...
Click to collapse
There's a member on this forum working on a deodexed and debloated ROM. Should be done soon.
minz1 said:
There's a member on this forum working on a deodexed and debloated ROM. Should be done soon.
Click to expand...
Click to collapse
Im aware of that ROM. We need CM or something similar ?.
He's also said he had a CM13 environment set up.
do i just run flashify to install this? Can someone write up a quick guide for setting up TWRP?
ottomatic89 said:
do i just run flashify to install this? Can someone write up a quick guide for setting up TWRP?
Click to expand...
Click to collapse
What you need:
TWRP.tar file
Odin 3.0.9
SM-J700P phone
micro usb to usb cable
1. Boot the phone into download mode (vol down + power + home while booting up)
2. press vol up to continue into download mode
3. launch odin
4. plug your phone into your pc
5. press the "ap" button, and select the TWRP.tar file. DO NOT MESS WITH ANYTHING ELSE! make sure the checkbox by "AP" is checked
6. press start
7. make sure you hold down home + vol up + power to boot into twrp before the splash screen, and wait
8. now you're in TWRP!
minz1 said:
What you need:
TWRP.tar file
Odin 3.0.9
SM-J700P phone
micro usb to usb cable
1. Boot the phone into download mode (vol down + power + home while booting up)
2. press vol up to continue into download mode
3. launch odin
4. plug your phone into your pc
5. press the "ap" button, and select the TWRP.tar file. DO NOT MESS WITH ANYTHING ELSE! make sure the checkbox by "AP" is checked
6. press start
7. make sure you hold down home + vol up + power to boot into twrp before the splash screen, and wait
8. now you're in TWRP!
Click to expand...
Click to collapse
Help me please! I did every step you detailed, and I managed to make a nandroid backup with TWRP. But now I am unable to boot back into my system. Every time I click on reboot into system it boots back into TWRP... I did not think that making a backup on TWRP would soft-brick my phone, but it has.
Is there any suggestions you could give me to fix this? Was it my fault for using an app to restart my phone into recovery? Is there a way to boot into system from the TWRP terminal?
If it matters, when I boot up my phone I see this message on the top:
"Recovery is not seandroid enforcing
set warrenty bit: recovery"
ottomatic89 said:
Help me please! I did every step you detailed, and I managed to make a nandroid backup with TWRP. But now I am unable to boot back into my system. Every time I click on reboot into system it boots back into TWRP... I did not think that making a backup on TWRP would soft-brick my phone, but it has.
Is there any suggestions you could give me to fix this? Was it my fault for using an app to restart my phone into recovery? Is there a way to boot into system from the TWRP terminal?
If it matters, when I boot up my phone I see this message on the top:
"Recovery is not seandroid enforcing
set warrenty bit: recovery"
Click to expand...
Click to collapse
Your backup probably got corrupt. Errors, unfortunately, do happen. You may have to flash this firmware to your device to get it working.
http://www.sammobile.com/firmwares/database/SM-J700P/
Mine did the same thing. I flashed with flashfire booted into twrp made a backup then tried booting into system but it just reboots me back into recovery.. i flashed just the stock recovery afterwards and it booted right into system.. i tried wiping system data cache internal storage dalvix cache then restoring the backup but it still booted into twrp instead of system. Like i did say it did boot right into system after flashing the stock recovery.
Works
minz1 said:
https://dl.twrp.me/j7ltespr/
Here it is!
Click to expand...
Click to collapse
Thank you very much!
Sorry but that didnt work for me either. I used twrp-3.0.2-0-j7ltespr.img.tar and i had ther same soft brick issue as the other guy. I have a rom i would like to use but i cant cause i cant make a backup. Any help would be appreciated, ty.
Nas8 said:
Sorry but that didnt work for me either. I used twrp-3.0.2-0-j7ltespr.img.tar and i had ther same soft brick issue as the other guy. I have a rom i would like to use but i cant cause i cant make a backup. Any help would be appreciated, ty.
Click to expand...
Click to collapse
TWRP 3.0.2.0 (Beta) For the J700P (2016) fixed
http://forum.xda-developers.com/galaxy-j7/development/twrp-3-0-2-0-beta-j700p-2016-fixed-t3485766
SykkNyzz said:
TWRP 3.0.2.0 (Beta) For the J700P (2016) fixed
http://forum.xda-developers.com/galaxy-j7/development/twrp-3-0-2-0-beta-j700p-2016-fixed-t3485766
Click to expand...
Click to collapse
Thanks a lot man that worked. Really do appreciate it...:good:
hi guys i tried to flash my C9000 but now my phone is in bootloop and i can't enter recovery it says
recovery booting
recovery is not seandroid enforcing
set warranty bit recovery what to do plz help
i tried skyneel .com guide
i flashed twrp on my phone
Hi bro. İ have same problem 8 months ago and i know this fix.
First. Sorry for my bad english.
You must wait the battery fully discharge. Because you cant make anything now.
When fully discharged phone. You plug charge and press wolume down+power+home. You can go to download mode this way. You must flash the original firmware via odin.
And if you want flash twrp again this step is required.
Go Settings page in odin and untick the auto reboot.
And manually go to recovery mode by download menu after install.
ahmetk711 said:
Hi bro. İ have same problem 8 months ago and i know this fix.
First. Sorry for my bad english.
You must wait the battery fully discharge. Because you cant make anything now.
When fully discharged phone. You plug charge and press wolume down+power+home. You can go to download mode this way. You must flash the original firmware via odin.
And if you want flash twrp again this step is required.
Go Settings page in odin and untick the auto reboot.
And manually go to recovery mode by download menu after install.
Click to expand...
Click to collapse
So should i flash twrp directly or do i have to first flash the original firmware then flash twrp and also can you post original firmware download link because all the links are paid like sammobile etc
hatib237 said:
So should i flash twrp directly or do i have to first flash the original firmware then flash twrp and also can you post original firmware download link because all the links are paid like sammobile etc
Click to expand...
Click to collapse
Flash twrp directly and go to recovery after installation. Dont make any reboots before going to twrp.
ahmetk711 said:
Flash twrp directly and go to recovery after installation. Dont make any reboots before going to twrp.
Click to expand...
Click to collapse
So after flashing i should go in recovery and do what
hatib237 said:
So after flashing i should go in recovery and do what
Click to expand...
Click to collapse
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
ahmetk711 said:
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
Click to expand...
Click to collapse
Ok i and to access recovery the button is volume up + home +power right
ahmetk711 said:
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
Click to expand...
Click to collapse
I was trying to access to recovery but couldn't i tried holding buttons but didn't work
hatib237 said:
hi guys i tried to flash my C9000 but now my phone is in bootloop and i can't enter recovery it says
recovery booting
recovery is not seandroid enforcing
set warranty bit recovery what to do plz help
i tried skyneel .com guide
i flashed twrp on my phone
Click to expand...
Click to collapse
its for bad recovery file
you have to wait until your battery dead.
then connect to pc and turn on the phone and hold (Power + Home + vol Dwn )
flash TWRP 3.2.1 c9ltechn (only this version)
reboot
if not worked flash nougat 7.1 rom
g900h said:
its for bad recovery file
you have to wait until your battery dead.
then connect to pc and turn on the phone and hold (Power + Home + vol Dwn )
flash TWRP 3.2.1 c9ltechn (only this version)
reboot
if not worked flash nougat 7.1 rom
Click to expand...
Click to collapse
will the 3.2.1 work on 7.1.1 c9000 HK
hatib237 said:
I was trying to access to recovery but couldn't i tried holding buttons but didn't work
Click to expand...
Click to collapse
Ok, do the 3button combination as if you are booting into download mode. As soon as screen goes black, keep power and home key pressed down but move to volume up. You have to be quick before it boots to download. This will get you to recovery.
SM-N950U Chimera Rom 2.0
hatib237 said:
will the 3.2.1 work on 7.1.1 c9000 HK
Click to expand...
Click to collapse
Yes 100% Tested.
but Im not sure its work on oreo(8)
Without root
Twrp how i flash withoit root i want my device back help me i flash all time file combination file repiar firmaware but nothing work agian show recovery booting
Hi everyone,
I am trying to root my device but I have had no luck!
I flash the TWRP with Odin and get a pass, but when I boot my phone into recovery mode to install SuperSu I am faced with the normal Android recovery mode.
I am running 5.1.1 Lollipop and have made no changes to the device.
Can anyone help?
Bump
Do not restart on the rom after the flash but on the recovery.
barjos12 said:
Hi everyone,
I am trying to root my device but I have had no luck!
I flash the TWRP with Odin and get a pass, but when I boot my phone into recovery mode to install SuperSu I am faced with the normal Android recovery mode.
I am running 5.1.1 Lollipop and have made no changes to the device.
Can anyone help?
Click to expand...
Click to collapse
djeman said:
Do not restart on the rom after the flash but on the recovery.
Click to expand...
Click to collapse
Hi there,
Sorry im quite new to all of this.
Do you mean untick auto-reboot on odin?
At reboot, after the recovery flash, you need to press "volume up+home+power" to reboot on the recovery.
If you uncheck auto-reboot you can reboot with "volume down+home+power" and when the screen goes off press "volume up+home+power".
So for my problem the solution is not to tick auto-reboot on odin right? I am highly confused
Disable auto reboot or you need to be faster to press buttons when the screen goes off ^^
If the stock rom boots it'll replace the recovery by the original, you need to accept a popup in the twrp recovery to lock this function.
I forgot to say, supersu is not the best software at the moment magisk is maybe a little better :
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
barjos12 said:
Hi everyone,
I am trying to root my device but I have had no luck!
I flash the TWRP with Odin and get a pass, but when I boot my phone into recovery mode to install SuperSu I am faced with the normal Android recovery mode.
I am running 5.1.1 Lollipop and have made no changes to the device.
Can anyone help?
Click to expand...
Click to collapse
Untick auto reboot, after flashing twrp pass then remove your battery from phone.
Plug in your battery and press power+volume up+home together to go to twrp and flash supersu or magisk
Same in title, can someone help me?
ALYSKY said:
Same in title, can someone help me?
Click to expand...
Click to collapse
Elaborate the steps you do.
1.unlocked bootloader
2. downloaded TWRP and RedWolf recovery
3.Followed this: https://forum.xda-developers.com/asus-zenfone-max-pro-m1/development/recovery-twrp-3-2-1-x-t3787134
https://forum.xda-developers.com/as...t/recovery-red-wolf-recovery-project-t3787402
4.when I try to boot to recovery it boots only into stock recovery or shows me black screen.
5.What should I do to sukcessfully flash custom recovery?
Here's a simple fix....
Reboot to bootloader...
Open adb
Type
Fastboot erase recovery
Fastboot flash recovery twrp.zip(whatever your file is named)
Then long press pow button turn off..
Now press and hold power button and vol down....leave power button when screen lights up but keep holding vol down for a few more second..
It should boot into twrp now
pranavkpr said:
Here's a simple fix....
Reboot to bootloader...
Open adb
Type
Fastboot erase recovery
Fastboot flash recovery twrp.zip(whatever your file is named)
Then long press pow button turn off..
Now press and hold power button and vol down....leave power button when screen lights up but keep holding vol down for a few more second..
It should boot into twrp now
Click to expand...
Click to collapse
after booting to recovery only black screen shows, sound is coming but screen remains blank.
solid_snake[π] said:
after booting to recovery only black screen shows, sound is coming but screen remains blank.
Click to expand...
Click to collapse
which variant did you try? firmware version ?
b coz , after update firmware version above 318 twrp doesn't work.
so, we 'll wait for another development of twrp:
raghu_xdev said:
which variant did you try? firmware version ?
b coz , after update firmware version above 318 twrp doesn't work.
so, we 'll wait for another development of twrp:
Click to expand...
Click to collapse
thanx for the reply i replaced the old phone as it was not booting at all after i tried to revert back to .247 . but then the new phone i got was already on .318 so same twrp not installing issue someone said something like twr(pie) worked for them but i cant find anything like that. can u help me with that. thanx in advance.
Enter fastboot mode,flash twrp recovery,then go to recovery by pressing volume down and power button.if it boots OS then it will be replaced by stock recovery.so if you can't boot to recovery first time(BEFORE BOOTING OS) ,repeat the same process.
Any update on this , I tries installing TWRP version twrp-3.2.3-0-X00T-20180902.img but its the default recovery That I am getting.
venkatmadhusudhanan said:
Any update on this , I tries installing TWRP version twrp-3.2.3-0-X00T-20180902.img but its the default recovery That I am getting.
Click to expand...
Click to collapse
I hav the solution just revert back to stock 316 build of m1 unlock bootloader again and flash twrp through all in one tool 2-3 times randomly just try after some time it will work for sure
Hi guys.
I'm lost!
Wonder if anyone could help a newbe like myself!
So:
I havae unlocked the bootloader, flashed with newest twrp recovery img.
Then?? I cannot boot into twrp for some reason!
I wonder if there is only a specific release of twrp that my phone allows, or can I get whichever??
And also.... Once it's done and I try to long press the volume up + power button, it doesn't seem to get me anywhere.
What am I missing??
All the tutorials and the thread I read make perfect sense...but then I fail miserably!
Please help!
Thanks!!!
Nobody?? Please help!! ??
Guys?!
Gb123456 said:
Hi guys.
I'm lost!
Wonder if anyone could help a newbe like myself!
So:
I havae unlocked the bootloader, flashed with newest twrp recovery img.
Then?? I cannot boot into twrp for some reason!
I wonder if there is only a specific release of twrp that my phone allows, or can I get whichever??
And also.... Once it's done and I try to long press the volume up + power button, it doesn't seem to get me anywhere.
What am I missing??
All the tutorials and the thread I read make perfect sense...but then I fail miserably!
Please help!
Thanks!!!
Click to expand...
Click to collapse
Gb123456 said:
Guys?!
Click to expand...
Click to collapse
press volume down+power key to reboot to recovery after flashing twrp using adb