[Guide] Multi Boot Note 5
I am using this on SM-N920C of the Note 5; I believe this will work with other Note 5 Variants as well. Sprint variant already confirmed. Others who have different variants which are not tested can try this and update us, and we will be here to help you out if you are ready to try this out.
@chenxiaolong is the one who made this happen to our beloved Note 5
Main advantage of this is you can try any new rom with out loosing or having any kind of trouble with your existing rom. This mod will not change anything in your primary rom, so any time you can go back to your normal state.
Disclaimer
1.I am not responsible for bricked devices, dead SD cards,etc.
2.Before going further! YOU are choosing to make these modifications.
supported Devices: ( Tested and confirmed working)
SM-N920C : noblelte (Tested by me )
SM-N900P (Sprint): nobleltespr (Tested )
Requirements
* Read the full guide before Starting.
* Backup your phone if you are doing this first time. (Full Nandroid backup recommended for the new comers and it’s also recommended to others who don’t know what they are doing exactly even if they have multi booted several times)
* Rooted Note 5 with custom recovery (preferred TWRP or philz).
* free space in your internal SD (for example a TW rom could take up to 6.5GB )
* If you face any trouble please read the FAQ before doing something or asking for help. And if you want help please provide as much as details(device, roms, etc.) you can.
*
Instruction:
1.Download your desired Rom which you want to use for multi booting and the mods, addons, Kernel etc for the same. Keep the files in your internal memory.
2. Download the most recent snapshot release of Dual Boot Patcher and install it on your Note 5.
3. Open Dual Boot Patcher and grant SU permission. Then go to ROMS and you will see your Primary rom, press the 3dotmenu key and click "set kernel".
4. Then In Dual Boot Patcher go to Patch Zip File and Choose nobleltespr - samsung galaxy note 5 from the device drop down menu.
5. In the Partition configuration drop down menu select "Data Slot".
6. Below that you have to enter the ID of the secondary rom.(Example 1, 2, 3, etc. - it will take it as /data/multiboot/data-slot-1)
7.Now tap on the below button to choose the ROM's, Kernel and mods to patch them and make them perfect for Multi booting.
8. Always remember to keep same slot ID for the kernels and mods same as the rom. (Example: if you want to flash the kernel to the data-slot-1 rom then you have to select the same ID that’s 1 or if you want to flash the kernel to the data-slot-2 rom then you have to select the same ID that’s 2.)
9. Now press the tap to begin patching button to patch the file. And you will get a new patched zip file in the same location.
10. patch the kernel also for your rom with same id because most if the roms comes with out kernel so we have to patch the kernel and flash it along with the rom.
11. Now Boot into custom recovery and flash the new patched rom followed by the patched kernel without wiping anything and reboot.
12. And your device will boot into New Rom.
13.Install the Dual Boot Patcher app and set the kernel for your second ROM as well.
14. To switch between roms
•Open Dual Boot Patcher app/roms and click on primary or secondary rom as you like and reboot.
* Important things to keep in mind: while installing a rom or mod with Aroma installer don't reboot directly from the aroma.
You have to always uncheck the last option to reboot in aroma and click finish. So it can finish the final steps for multi booting.
And if you miss that it will only reboot to recovery. To boot back you have to flash your primary rom kernel or re-flash the patched rom.
Never update a secondary rom through OTA Update.
Revert
To revert back or if you face any problem just flash my Multi Boot cleaner.zip which will wipe all the installation files from \system and restore the primary rom kernel.
As a backup keep a copy of your kernel flashable zip file.
FAQ
1. App sharing?
Ans. Will be added shortly.
3. This rom can’t be patched.
Ans. some roms are not supported its known, if the Dev have time may be he will consider including them.
4. I am getting error while using the dual boot app.
Ans. http://forum.xda-developers.com/showpost.php?p=67198156&postcount=120
Add ro.patcher.device=noblelte to the bottom of your built.prop and your problem will be solved.
if your device is different from the above mentioned then add your product name instead of "noblelte"
if you don't know how to add this make a request with your product name, so i will make a flashable zip for that.
Click to expand...
Click to collapse
Credits/ Thanks:
@chenxiaolong
Original Thread: http://forum.xda-developers.com/showpost.php?p=45659284
Don't forget to thank him and if you can please consider a small donation for him because he really deserve it.
@aukhan & Team Emotroid
His Thread (Where I got the idea and help to make this guide): http://forum.xda-developers.com/note-4/general/dual-boot-n910f-snap-dragon-variant-t3065211
@rlorange for the help and support.
His thread for Dual boot backup and restore app. http://forum.xda-developers.com/showthread.php?t=2491299, http://forum.xda-developers.com/not...-4-15-multi-boot-backup-restore-v1-0-t3087187
@AholicCert for helping me with some scripts
@ other XDAmembers
My Note 3 multi boot guide: http://forum.xda-developers.com/galaxy-note-3/themes-apps/guide-dual-boot-note-3-t3091764/post60326851#post60326851
Good work man ... easy for testing ...
Thanks for creating this thread! I just got myself an S6 Edge+, so expect top-notch support for these new Galaxy devices
chenxiaolong said:
Thanks for creating this thread! I just got myself an S6 Edge+, so expect top-notch support for these new Galaxy devices
Click to expand...
Click to collapse
Thanks a lot dev. We really appreciate your help and we love your work very much.
On the tmobile note 5 I get this when trying step 2, seeing the kernel first the primary.
fireguy0306 said:
On the tmobile note 5 I get this when trying step 2, seeing the kernel first the primary.
Click to expand...
Click to collapse
add ro.patcher.device=noblelte to the bottom of your built.prop and your problem will be solved.
if your device is different add your product name instead of "noblelte"
i believe it will be ro.patcher.device=nobleltetmo
Multiboot cleaner fixed
Everyone please re-download the multiboot cleaner
kernel flashing fixed.
Could it work on my s6 edge 925F with a note5 rom? I'd really like to dual boot my phone!
Thanks for your work and sorry for the noob question!
Woeking on a Version for Samsung Galaxy S6 (G920F)?
Great work btw!
So adding that line to my build.prop allows me to multiboot two COJ5 ROMs just fine.
For fun i tried running the MM ROM as a primary and booting a COJ5 as a secondary, it doesn't work. The COJ5 ROM sits in a semi-bootloop it either sits at the Samsung boot animation or the "Starting Apps" . Now i stopped it after ~20 minutes, i figured it was dead at that point.
Either way Multiboot def works nicely on the SM-N920T
gdr_01 said:
Could it work on my s6 edge 925F with a note5 rom? I'd really like to dual boot my phone!
Thanks for your work and sorry for the noob question!
Click to expand...
Click to collapse
Check the screen shot for supported device's. With a note 5 rom I'm not sure. But with a note 5 port sure you can and the procedure will be almost same.
can you port it to s6?
Good work man ... easy for testing
bhavstech said:
can you port it to s6?
Click to expand...
Click to collapse
It will work with s6 also. You can follow the same instructions.
In the device drop down you have to select s6 flat/edge.
And the rest is same as note 5 guide.
if there is more requests, i can make a guide for s6 as well. for that i need a tester to confirm its working. i know its already working. but just in case. also as long as the moderators allows i will give support for that thread.
54NJ41 said:
add ro.patcher.device=noblelte to the bottom of your built.prop and your problem will be solved.
if your device is different add your product name instead of "noblelte"
i believe it will be ro.patcher.device=nobleltetmo
Click to expand...
Click to collapse
How do I change it??
dallen5 said:
How do I change it??
Click to expand...
Click to collapse
You need a root file Explorer app. I like ES File Explorer.
Then go to /system/build.prop and add that line to the bottom of the file.
fireguy0306 said:
You need a root file Explorer app. I like ES File Explorer.
Then go to /system/build.prop and add that line to the bottom of the file.
Click to expand...
Click to collapse
I can't even find the app in explorer
dallen5 said:
I can't even find the app in explorer
Click to expand...
Click to collapse
give me your device name i will make a flash able zip for you.
54NJ41 said:
give me your device name i will make a flash able zip for you.
Click to expand...
Click to collapse
n920T
dallen5 said:
n920T
Click to expand...
Click to collapse
here you go, just flash it in the recovery. and give me your feedback.
Related
WELCOME TO
SAMSUNG GALAXY S3 mini VE
THREAD
Informations about VE
The new model runs Android 4.2 Jelly Bean out of the box (as opposed to Android 4.1), and has a 1.2GHz dual-core processor (an upgrade from the 1.0GHz dual-core CPU of the old model). And that’s it, the rest of its features remained unchanged, including a 4-inch display with 480 x 800 pixels, 5MP rear camera, 1GB of RAM, and 8GB of expandable internal memory.
CPU Marvell PXA986 / ARM Cortex-A9
GPU Vivante GC1000
chipset is a marvel pxa 986/pxa988 chip set
opensource code HERE
PETITIONS
BECAUSE I8200 IS A DIFFERNT MODEL FROM ORIGINAL S3 mini DOESNT EXIST MANY DEVS OR SOURCE.HERE IT IS SOME PETITIONS TO MOVAFUSION AND OTHER TO HELP AND SUPPORT US
PETITION 1 - PLEASE Click on it and sign.
PETITION 2 - PLEASE Click on it and sign.
ROOT-KERNELS-ROMS-RECOVERY-MODS & UNBRICK
BEFORE START..READ ALL CAREFULLY.IF YOU DONT UNDERSTAND DONT DO IT !!!
Samsung SIII mini Ve i8200/N/L/Q is not same with i8190/N/L
DONT TRY ANYTHING FROM I8190
ROOT METHODS
1. Vroot http://vrootdownload.info/
Instructions
1. Download the rooting application. (This app can root many other devices)
2. Install the app. This is a Chinese app so I will guide you.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called ???? 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for permission by ???? 1.0.4, choose ??(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze ???? 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and ???? 1.0.4 will not be there anymore.
2. Kingo root http://www.kingoapp.com/
Instructions:
Just run the app
3. Flash SuperSU
install a custom recovery and flash the zip
HERE the link
RECOVERY
TWRP recovery (SAFE)
Link here
Link Attention with TWRP-Recovery. Data-Partition restore seems to be not right. At the moment please did not use it, because it can delete your data-partition. We have to investigate it further! Other partitions seems to be ok, but its a good Idea if you copy your important data also manually to a other storage (like PC) while you trying things of this thread.[/COLOR]
Philz Touch Recovery (safe)
Link [URL="https://www.dropbox.com/s/cviev1st9d3331z/PhilzTouch_recovery.tar.md5.zip?dl=0"]Here
Infos for Philz recovery:
Philz-Recovery seems to work fine for the Backup/Restore functions and also some zip-installations (be aware that not every zip is compatible with i8200!) .No workin boot image backup
Warning about the recovery:
Nevertheless, it is absolutely recommended to go to recovery ONLY WITH THE THREE BUTTON METHOD !!! To try it with the software/adb/startmenü "Reboot to recovery" will produce at the moment a bootloop, which can produce a "not easy to solve Softbrick". The three-Button-Method is safe!
Installation Guide for recoveries:
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the recovery file mda file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
*NOW Take a backup before continue
KERNELS:
Baroni kernel (beta)
==>KERNEL THREAD<==
ROMS:
ALL IS STOCK BASED ROMS
NO CM AOSP OR OTHER CUSTOM ROMS
1 First Custom ROM for S3 Mini Value Edition [TEST BUILD][NO WARRANTY]
NOT SAFE YET
HERE
FOR THOSE WHO DOWNLOADED ROM
HERE
2. [ROM] [STOCK] Deodex ROM for goldenvess-3gxx
[ROM] [STOCK] Deodex ROM for goldenvess-3gxx
3. [ROM][STOCK] aosp themed Rom for S3 mini VE
the link
4.[VE][ROM][STOCK]GoldenS5 Style for S3 mini VE
HERE thanks to
@Leandro Lopes (LL)
@Rodney -eu kk- (RDY)
@PaulRichter
5.[VE][ROM][4.3] for Samsung Galaxy S3 mini VE
the link
MODS:
DeOdex Stock APPs:
The Thread
Tweaks for stock firmware:
http://forum.xda-developers.com/galaxy-s3-mini/general/guide-i8200-perfomance-battery-tweaks-t2889289
Center clock and Battery percentage:
Use Xposed Instaler & Gravity box
* I am not responsible for bricked devices, dead SD cards
*If you are unsure about what you do or do not know
how to revive your mobile not do anything not from the below
* Me or the other members not our responsibility
if you destroy your mobile
UNBRICK METHOD:
You can find firmwares for i8200/N at http://www.sammobile.com/firmwares/ (Just search your model. Be careful with i8200 and I8200N maybe soft brick if install wrong!!!)
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Thanks to:
@greeneyes2910 for the recovery philz
@SolarPlexus for kernel and twrp recovery
@t-shock for this tweaks
@JynAlek for this helpness and the testing and beta test rom
@drumandbassfreak for [STOCK] Deodex ROM
@PaulRichter for the stock themed rom
Our phone will never asee how is to have a custom rom -_-
I rooted my GT-I8200L using Kingo Android Root and I still working on a port of CWM. Until now, no sucess... My english is poor, I'm brazilian!
Sent from my GT-I8200L using XDA Premium 4 mobile app
i hope to suceed to make a port
maybe someone will notice us and develop CM11
Does a new development custom rom ??
KwstPap said:
Hi !!!
Because no where doesnt exist a thread about Samsung s3 mini I8200/N aka VE I decided to make one!!!
A few people may have thiw specific model o s3 mini so there are no many tutorials roms cwm etc!!!
Here we will write anything we know about this smartphone.any question or anything else!!!
The new model runs Android 4.2 Jelly Bean out of the box (as opposed to Android 4.1), and has a 1.2GHz dual-core processor (an upgrade from the 1.0GHz dual-core CPU of the old model). And that’s it, the rest of its features remained unchanged, including a 4-inch display with 480 x 800 pixels, 5MP rear camera, 1GB of RAM, and 8GB of expandable internal memory.
[COLOR="Red"]ROOT[/COLOR] thanks to DanielCarbajal96 for tutorial
http://forum.xda-developers.com/showthread.php?t=2725346
ONLY WITH VROOT 1.7.6 no other apps can root s3 mini ve!!!
FIRMWARES
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
you will find the new firmwares on http://www.sammobile.com/firmwares/ (just search your model.be carefull with i8200 and I8200N maybe soft brick if install wrong!!!)
UnBrick
download a ofixiall firmware and and install it with the Odin
ROM & Recovery Mod
Not yet .maybe in future with someone make it!!!
Some Extras
Make it lighter!!1
delete Bloatware (delete useless sustem apps)
like
Not needed/redundant STOCK apps safely deleted with Titanium BackUp:
1. Chat On (Personally I use WhatsApp)
2. Chrome (I prefer Dolphin Browser)
3. E Mail (I keep G Mail instead)
4. Game Hub (Play Store is enough for me)
5. Google + (I use FaceBook only)
6. Help (Read XDA instead!!!)
7. Internet (Dolphin!!!)
8. Messenger (WhatsApp)
9. Play Movies (I don´t see movies in my phone)
10. Play Books (Same)
11. S Suggest (Google Play)
12. S Voice (Keep Voice Search of Google Now)
13. Samsung Apps (Google Play)
14. Talk (WhatsApp again)
15. Video Hub (Same as Play Movies)
16. Video Player (I choose MX Player)
Suggestions are accepted, of course.
Don´t forget 3 little things:
-Do a full BackUp first at all!!!
-Freeze the App before deleting it. And if it all keep working delete safely
-Clean up Dalvik cache
UPDATE: Also dafe to remove:
1. User manual
2. Yahoo Finances
3. Yahoo News
4. Live Wallpapers
thanks aavvaallooss
Center clock and % battery status bar
Samsung forgot to put a option about % battery on statusbar
We can put it witn Xposed framework and gravitybox
http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401 thanks rovo89
I HOPE SOMEONE SOMEWHERE MAKE A CWM AND ROM FOR THIS MODEL !!!
HAVE A NICE DAY!!!
Click to expand...
Click to collapse
Hey
I'm looking for a scatter loading file i8200L VE , can you help me ?
Anyone know if someone is working on a kooked room-recovery for i8200?
Is there a timeline?
as you all know...CM development is made for free and developers decide if they want to start work on CM on a certain device.. we only hope that some developer will buy our I8200 and start work for it
georgedk said:
as you all know...CM development is made for free and developers decide if they want to start work on CM on a certain device.. we only hope that some developer will buy our I8200 and start work for it
Click to expand...
Click to collapse
That's why they need donation for new custom roms. They need to buy the specific device, so they can work with it
So we need to gather a donation and say what we want
Do we have any hope now? :victory:
Well let's hope so, I'm sick and tired of having to put up with the stock ROM. I have more problems with it than a custom ROM for God's sake.
It appears that Galaxy S III Mini G730A have updated android to 4.4.2 Maybe will se it on our phone soon.
VallNAr said:
It appears that Galaxy S III Mini G730A have updated android to 4.4.2 Maybe will se it on our phone soon.
Click to expand...
Click to collapse
Our phones with the same features. Maybe Samsung publications, maybe someone will adapt
The Samsung source code i8200n
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=i8200n
there all all sources for all devices,not only i8200N... anyway..maybe will have an official upgrade since ATT made possible KitKat
Come on .A Dev to port something.there are a lot people want a Cwm or a rom
I think us developers doesn't take it seriously
hazar1907 said:
I think us developers doesn't take it seriously
Click to expand...
Click to collapse
We must show them that we are lot of people want a recovery or a rom or port some of them
any news about the recovery
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
25/03/15 Updated
Switched to nvertigo67 current-12.0 kernel
Fixed Kodi/XBMC touch issue
Changed from google to samsung MTP driver.
21/03/15 Update, fixed Phone call audio only coming through left speaker
20/03/15 Update, fixed Dialer crash.
19/03/15 Updated, fixed a few issues.
Power off charging is now working
Reboot recovery is working, I did have to edit the java code to make this work, seems a recent change in CM caused this, possibly a bug in cm?
Wifi hotspot fixed.
Added f2fs support to kernel, recovery also updated, have not fully tested changing filesystem to f2fs. Edit. Seems like it will require a special built rom and recovery to work, I will look at this when I start running out of bugs to fix
Many other minor fixes.
Not Working:
In call audio only coming through left speaker
Dialer app chashing on making or receiving a call
Power off charging, boots into recovery.
Advanced reboot menu, wont reboot into recovery, though adb reboot recovery works. Not sure whats going on here.
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
I find this tablet is so much better with this ROM , like many I hate Samsung's TouchWiz. Everything is so much smoother and responsive now.
To Install:
Flash TWRP Recovery First with odin, Follow this Cf-Autoroot guide and substitute CF-Auto-Root.tar with my recovery TWRP_SM-T805.tar downloaded from my google drive.
Once recovery is installed transfer the CM11 rom zip to your internal sdcard, also grab GAPPS http://wiki.cyanogenmod.org/w/Google_Apps and have that on your SD card also,
Optional grab supersu also.
Boot into recovery by powering off and holding down home, volume up and power till recovery starts.
Once in TWRP Recovery pick Install, choose the rom and gapps to install at the same time. Flash
After install finished we need to do a wipe, so go back to the main screen and choose wipe.
Reboot, Good luck.
I don't have a lot of time to answer questions, I will do my best to check back regularly.
Here is my github, It is upto date with my builds now. https://github.com/Andrewt12 )
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
cm-11-20150323-UNOFFICIAL-chagalllte.zip
cm-11-20150323-UNOFFICIAL-chagalllte.zip.md5
TWRP
https://drive.google.com/file/d/0B9JsCrp0SHzbekdGYV9mcks5bWs/view?usp=sharing
Deleted
Deleted
awesome Ive been waiting for something like this..
How bout t705? ?
all things are good in this rom can anyone verify this please
Cant install it can someone tell me steps on installinh it please
andyt12 said:
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
Not Working:
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
This tablet is to much better with this ROM , like many I cant stand Samsung's TouchWiz. Everything is so smooth and responsive now. If Samsung bought this tablet out with AOSP it would be a sure winner.
To Install:
Flash TWRP Recovery First with odin, I use 3.07, the one that comes with CF-Auto-root. Then flash the cm from recovery.
I dont have a lot of time to answer questions, I will do my best to check back regularly.
I will provide the source to my changes in a few days.
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
Cant post links, copy and paste
drive.google.com/folderview?id=0B9JsCrp0SHzbajdLdGZUVEhRTzA&usp=sharing
Camera Fix http://forum.xda-developers.com/galaxy-s3/themes-apps/17-fixed-camera-app-lib-cm-aosp-roms-t2505973
Click to expand...
Click to collapse
For camera take a look at the last 4 commits (the reverts) from here: https://github.com/nvertigo/android_packages_apps_Camera2/commits/cm-11.0
I'm so involved in cm12 developing that I don't know if you can just use my repo, or if you have to rebase/reaply, but that is what breaks camerawraper on our device. The opting out like on picasso don't work for chagallwifi, so I think chagalllte suffers from the same issue. Hope this helps.
nvertigo67 said:
For camera take a look at the last 4 commits (the reverts) from here: https://github.com/nvertigo/android_packages_apps_Camera2/commits/cm-11.0
I'm so involved in cm12 developing that I don't know if you can just use my repo, or if you have to rebase/reaply, but that is what breaks camerawraper on our device. The opting out like on picasso don't work for chagallwifi, so I think chagalllte suffers from the same issue. Hope this helps.
Click to expand...
Click to collapse
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
andyt12 said:
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
Click to expand...
Click to collapse
Congrats. Getting voice and data working is a great job! For klimtlte: chagallwifi and klimtwifi differ subtile, but they DIFFER (i.e. sound, capacitive keys). If you really want to try klimtlte too, you should have a look at @eousphoros gits.
.... very good. Waiting to put new version on my T-805..
Thanks a lot!
andyt12 said:
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
Click to expand...
Click to collapse
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My Twrp is 2.8.5.0 the newest for this Tab . I have an screenshot .... is this an Problem with Twrp or is this incompatible for my Tab ? I have defenitif an Tab S 10.5 LTE T805
Errormassage: https://drive.google.com/file/d/0B1jrIRt04q3WUmtRM3BBczBMLXc/view?usp=sharing
My Tab: https://docs.google.com/file/d/0B1jrIRt04q3Wb2pGYkViLTFPazA/edit?usp=docslist_api
any1 installed the rom yet if so please show steps on installing it please
meexx said:
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My
Click to expand...
Click to collapse
You come from a Wifi-only rom, s.a CM-12?
Your tablet is defined as a wifi. You can edit the package script in the zip to remove the control
Skickat från min SM-T805 via Tapatalk
I have tested a wifi only cm11 package, yes. It runs on my Tab very good without 3G option... Wifi only. Iam happy it comes an CM11 for T805. OK wich files must editiding to removed the control? I will tested it
andyt12 said:
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
Not Working:
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
This tablet is to much better with this ROM , like many I cant stand Samsung's TouchWiz. Everything is so smooth and responsive now. If Samsung bought this tablet out with AOSP it would be a sure winner.
To Install:
Flash TWRP Recovery First with odin, I use 3.07, the one that comes with CF-Auto-root. Then flash the cm from recovery.
I dont have a lot of time to answer questions, I will do my best to check back regularly.
I will provide the source to my changes in a few days.
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
Cant post links, copy and paste
drive.google.com/folderview?id=0B9JsCrp0SHzbajdLdGZUVEhRTzA&usp=sharing
Camera Fix http://forum.xda-developers.com/galaxy-s3/themes-apps/17-fixed-camera-app-lib-cm-aosp-roms-t2505973
Click to expand...
Click to collapse
This is what weve all been waiting for!!! The modem working as well would be such a bonus , just wow!
meexx said:
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My Twrp is 2.8.5.0 the newest for this Tab . I have an screenshot .... is this an Problem with Twrp or is this incompatible for my Tab ? I have defenitif an Tab S 10.5 LTE T805
Errormassage: https://drive.google.com/file/d/0B1jrIRt04q3WUmtRM3BBczBMLXc/view?usp=sharing
My Tab: https://docs.google.com/file/d/0B1jrIRt04q3Wb2pGYkViLTFPazA/edit?usp=docslist_api
Click to expand...
Click to collapse
Hi meexx, You will need to use my twrp, different partition size than chagallwifi, thats also why it throws an error, as you installed chagallwifi twrp and it is looking for the wifi rom.
Just hold off for now though, my latest has many fixes to what I posted. I will hopefully upload later today, got to finish my chores first otherwise I will be in trouble with the wife for spending too much time on the computer.
Ok OK........ Greeting your wife we waiting for you. Can you make a Link to your twrp version? When this my problem is then i flash your twrp with odin and all is good, I hope so. Have a nice weekend.......... and Thanks for your work
meexx said:
Ok OK........ Greeting your wife we waiting for you. Can you make a Link to your twrp version? When this my problem is then i flash your twrp with odin and all is good, I hope so. Have a nice weekend.......... and Thanks for your work
Click to expand...
Click to collapse
Its in my google drive.
https://drive.google.com/file/d/0B9JsCrp0SHzbeTdjTDhDUUVDa00/view?usp=sharing
Doing a fresh build now.
Updated build in first post.
I had the same problem but just deleted the first three lines of text in the updater-script file. Only problem I got now is that titanium backup can't see my external SD card
Guys, I'm making this thread for those people who are using Sprint's Note 4 (N910P) outside of US and are stuck with Sprint's ROM (or the ROMs that are based on it) and have certain issues in using the ROM.
For instance, I'm using the unlocked variant of N910P with a GSM carrier, so I was having problem in connecting to the Hot-Spot feature as all of my devices were stuck at "Obtaining IP Address" loop and eventually would never connect.
I did try various "hacks" present here on XDA for enabling Hot-Spot feature like using Galaxy Tools, using SQLite Editor, etc but wasn't able to overcome the problem.
Since, XDA is a great platform for sharing solutions to various problems, I decided to create a thread especially for those who don't want Sprint's bloatware but want to stick with "Stock ROM features" like S Pen.
Hence, here's the step-by-step guide for installing other carrier's ROM on N910P:
Before attempting all this,make sure to be on OK1 Bootloader & Baseband (Do not try this on Marshmallow Bootloaders) for N910P.
Step 1:
Install TWRP recovery version 3.0.1 (Yes, you read it right..it's 3.0.1 & not 3.0.2)
Once you have downloaded, flash it through ODIN (the TAR file) or through existing TWRP (using ISO image).
Step 2:
Make a backup of your current ROM so that you can revert to it in case of unsuccessful flash.
Step 3:
Go to Wipe (in TWRP)-----> Factory reset (do this 3 times.....yes, 3 times!)
Then, go to Advanced Wipe & wipe Dalvik/ART cache,Cache,Data,Internal Storage, System (Do not wipe external SD Card).
Hit the back button to come out of the "wipe window"
Step 4:
Click on "Install" and choose the files in following order:
a) Dr Ketan's ROM
b) Data Fix for the ROM
c) Kernel
d) SuperSU (I used beta 2.71)
Once the flashing process is finished, reboot the system and wait for the phone to boot.
It will take a long time (around 10-15 minutes) to boot.
Once you are on setup wizard screen, choose to apply "Dr Ketan's fix" and then you can proceed like you do in any other ROM.
Downloads:
TWRP: https://dl.twrp.me/trltecan/
(Choose TAR or ISO as per your choice and flash accordingly)
ROM:
http://www.drketanrom.com/n910g.html
(All credit goes to Dr Ketan for his hard work & awesome ROM)
(Its for G variant)
Data FIX:
https://drive.google.com/folderview?id=0B1I0vyV3onrjemR2YlY2V0s0ME0&usp=sharing
(Credit goes to @dr.ketan, & @Lanc-City for providing all the required info)
Kernel:
http://d-h.st/rb3d
(The credit for this Kernel goes to @Hani K.)
Super SU:
http://forum.xda-developers.com/showthread.php?t=1538053
(Credit goes to @Chainfire)
Note: I am in no way to be credited for all this as the links provided above are a result of hard work from the respective developers. I have just compiled all the links into one thread so that it can help anyone like me to switch to other ROM.
Also, neither I nor any of the above mentioned developers/members are responsible for any fault that may arise due to improper flash or other reasons..
Do all of it at your own risk!
Last but not the least, I would like to thank @ricohz for helping me out when I was stuck in some steps..
(In the screen-shot attached, the model number is 920T for obvious reasons...so don't ask why it's not 910P..)
Do note that the APNs have to be edited manually, else the data connectivity would not be there!
(This thread should benefit the non-Sprint users........)
Update:
There are some more ROMs that can be flashed successfully on N910P such as:
1. Maximum Overdrive
http://forum.xda-developers.com/note-4-tmobile/development/s7-portn910t-n910w8-t3375956
2. Nameless ROM
http://forum.xda-developers.com/note-4/snapdragon-dev/rom-nameless-mm-lightfastdeodexed-t3363547
Kindly say Thanks to the developers on their respective threads for all their hard work.
Thanks for sharing im gonna give it a shot
But why did you say to be on ok1 if you have marshmallow version in the screen shot
Sent from my Not4 Mod using Tapatalk
NICE
SPRINT USERS IF YOU FLASH THIS TEXT WON'T GO OUT
MMS ARE FINE TEXT COME IN BUT WON'T GO OUT
this works for him because he's using a gsm sim card
Google Drive link is broken
Sent from my SM-N910P using Tapatalk
Data fix and Kernel fix link broken...
Anybody get text going I'd be happy too pay bounty
Jedi Aaris said:
Thanks for sharing im gonna give it a shot
But why did you say to be on ok1 if you have marshmallow version in the screen shot
Sent from my Not4 Mod using Tapatalk
Click to expand...
Click to collapse
OK1 bootloader has been suggested so as to avoid any incompatibility issues for the ROM!
Shiva758 said:
Data fix and Kernel fix link broken...
Click to expand...
Click to collapse
Links have been updated!
ricohz said:
NICE
SPRINT USERS IF YOU GLASH THIS TEXT WONT GO OUT MMS ARE FINE TEXT COME IN BUT DON'T GO OUT
thus works for him because he's using a gsm sim card
Click to expand...
Click to collapse
@ricohz: Yes,buddy...
For GSM carriers, this method works flawlessly..
Kudos to you for helping me out!
bddpolo said:
Anybody get text going I'd be happy too pay bounty
Click to expand...
Click to collapse
Some one said bounty?
Lol jk
I got boot loops what I do now right now I am on ok1 !!!!what mistake i did? Is that ROM marshmallw? May be I downloaded that one ? Which kernel we have to use ? When I go to download section it shows me three kernel variants ?
---------- Post added at 11:37 AM ---------- Previous post was at 11:33 AM ----------
Do we have to download n910pb6 mm firmware ?
I just messed my 4 hours on this ROM but every time I qm getting bootloops...I am on lollipop ok1 firmware and bootloader .I tried everything bit nothing works ..or may be its not complete clear what I download ?
Shiva758 said:
I just messed my 4 hours on this ROM but every time I qm getting bootloops...I am on lollipop ok1 firmware and bootloader .I tried everything bit nothing works ..or may be its not complete clear what I download ?
Click to expand...
Click to collapse
Tinkering and flashing custom ROMs on Android is not always a piece of cake...
Loads of patience is required and if the process is not carried out as stated/expected, time is bound to get wasted.
Anyway, here's what you need to do (Or at-least, expected to do..):
1. Take a backup of the current ROM.
2. Do Factory reset 3 times ( First time, do it again & do it yet again..making it three times)
3. Wipe everything(except External SD Card) again 3 times as above.
4. Flash the ROM.
5.Once ROM is flashed, do not reboot & flash the Data Fix.
6.Again, do not reboot and flash the Vitamin Kernel (originally meant for F variant).
7. Do not reboot yet again & flash the SuperSU (I FLASHED 2.71).
Now, reboot and wait for the setup screen to appear. It will take quite a long time to appear and the phgone will be stuck on Samsung logo for quite a while.
Now, if you have patience, wait for the process to finish, and if not, you know what to do..
Shiva758 said:
I got boot loops what I do now right now I am on ok1 !!!!what mistake i did? Is that ROM marshmallw? May be I downloaded that one ? Which kernel we have to use ? When I go to download section it shows me three kernel variants ?
---------- Post added at 11:37 AM ---------- Previous post was at 11:33 AM ----------
Do we have to download n910pb6 mm firmware ?
Click to expand...
Click to collapse
The direct link for the ROM is:
http://d-h.st/m9bj
The direct link for the kernel is:
https://www.androidfilehost.com/?w=files&flid=54698
Hope, this much of help will make things clear for you.
Finally it worked . Actually i am doing ( kernel) mistake .Thanks for providing direct links and for your kind help.
robinhood1808 said:
Guys, I'm making this thread for those people who are using Sprint's Note 4 (N910P) outside of US and are stuck with Sprint's ROM (or the ROMs that are based on it) and have certain issues in using the ROM.
For instance, I'm using the unlocked variant of N910P with a GSM carrier, so I was having problem in connecting to the Hot-Spot feature as all of my devices were stuck at "Obtaining IP Address" loop and eventually would never connect.
I did try various "hacks" present here on XDA for enabling Hot-Spot feature like using Galaxy Tools, using SQLite Editor, etc but wasn't able to overcome the problem.
Since, XDA is a great platform for sharing solutions to various problems, I decided to create a thread especially for those who don't want Sprint's bloatware but want to stick with "Stock ROM features" like S Pen.
Hence, here's the step-by-step guide for installing other carrier's ROM on N910P:
Before attempting all this,make sure to be on OK1 Bootloader & Baseband for N910P.
Step 1:
Install TWRP recovery version 3.0.1 (Yes, you read it right..it's 3.0.1 & not 3.0.2)
The reason for choosing 3.0.1 is that the ROM successfully booted using this version instead of 3.0.2 (Don't ask me the reason for it..)
Once you have downloaded, flash it through ODIN (the TAR file) or through existing TWRP (using ISO image).
Step 2:
Make a backup of your current ROM so that you can revert to it in case of unsuccessful flash.
Step 3:
Go to Wipe (in TWRP)-----> Factory reset (do this 3 times.....yes, 3 times!)
Then, go to Advanced Wipe & wipe Dalvik/ART cache,Cache,Data,Internal Storage, System (Do not wipe external SD Card).
Hit the back button to come out of the "wipe window"
Step 4:
Click on "Install" and choose the files in following order:
a) Dr Ketan's ROM
b) Data Fix for the ROM
c) Kernel
d) SuperSU (I used beta 2.71)
Once the flashing process is finished, reboot the system and wait for the phone to boot.
It will take a long time (around 10-15 minutes) to boot.
Once you are on setup wizard screen, choose to apply "Dr Ketan's fix" and then you can proceed like you do in any other ROM.
Downloads:
TWRP: https://dl.twrp.me/trltecan/
(Choose TAR or ISO as per your choice and flash accordingly)
ROM:
http://www.drketanrom.com/n910g.html
(All credit goes to Dr Ketan for his hard work & awesome ROM)
(Its for G variant)
Data FIX:
http://forum.xda-developers.com/not...guidehow-to-flash-dr-ketan-rom-6-0-1-t3364025
(Credit goes to @dr.ketan, & @Lanc-City for providing all the required info)
Kernel:
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-h-vitamin-t3364213
(The credit for this Kernel goes to @Hani K.)
Super SU:
It can be found here on XDA
(Credit goes to @Chainfire)
Note: I am in no way to be credited for all this as the links provided above are a result of hard work from the respective developers. I have just compiled all the links into one thread so that it can help anyone like me to switch to other ROM.
Also, neither I nor any of the above mentioned developers/members are responsible for any fault that may arise due to improper flash or other reasons..
Do all of it at your own risk!
Last but not the least, I would like to thank @ricohz for helping me out when I was stuck in some steps..
(In the screen-shot attached, the model number is 920T for obvious reasons...so don't ask why it's not 910P..)
Do note that the APNs have to be edited manually, else the data connectivity would not be there!
(This thread should benefit the non-Sprint users........)
Click to expand...
Click to collapse
what about flashing a stock N910F rom is it possible ?
if it is could you PLEASE, provide a flashable zip for N910F rom
Shiva758 said:
Finally it worked . Actually i am doing ( kernel) mistake .Thanks for providing direct links and for your kind help.
Click to expand...
Click to collapse
Glad to know that you finally made it to boot.
Hossam. AbdELHakim said:
what about flashing a stock N910F rom is it possible ?
if it is could you PLEASE, provide a flashable zip for N910F rom
Click to expand...
Click to collapse
I don't think that you can directly flash the stock ROM of "F variant" directly. Doing so might result in a bricked device.
My advise to you will be to carry out the procedure as stated in this thread.
The ROM provided in this thread is 99% stock so you will not face any compatibility issues.
got echoe data fix MO here I come fallow by Dr ketans data fix should apply to all roms with minor tweaks
ricohz said:
NICE
SPRINT USERS IF YOU FLASH THIS TEXT WON'T GO OUT
MMS ARE FINE TEXT COME IN BUT WON'T GO OUT
this works for him because he's using a gsm sim card
Click to expand...
Click to collapse
Will third party apps work for text?
Sent from my SM-N910P using Tapatalk
Hi Guys,
Im litterlay close to breaking down after trying to get Lineageos 14.1 running on my G900V verizon S5 for more than 12 hours now.
I followed various youtube tutorials and the guide given in this article https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848.
The last thing i tried was unlocking the bootloder following a yt tutorial... now the phone pretty much freezes when booting showing the galaxy s5 and the custom android logo, it even plays the booting sound of samsung but after nothing happens. All i tried since was trying to get it back to stock 4.4.2 but when i use ODIN it gives me the error " sw rev check fail aboot fused 2 binary 1".
At the moment i literally lost hope to ever get nougat to run on this f***kin verizon phone, all i want is to get it to run again on something newer than 4.4.4 :crying:
I´ll be so glad for any help and if you could even help me get 14.1 to run on it id love you guys for ever.
Edit: I can still get into recovery and download mode but cant get into safestrap anymore, but i do have a backup of the system 4.4.2 with root and safestrap on my pc would there be a way to use that?
Marv95 said:
" sw rev check fail aboot fused 2 binary 1"
Click to expand...
Click to collapse
It means that you've flashed a firmware newer than BOK3 at least once.
No chance to flash 4.4.2 with Odin any more.
If you just need a working VZW phone - simply download a stock firmware BOK3 or newer and flash it with Odin.
The first boot will take 15 min or so.
If you need something else - tell what you would like to have.
wow simple as that? well awesome but then what would you recommend me to do next? is there a way to still get cm 14.1 on the verizonphone or should i just go with stock 6.1 and accept all the verizon bloatware bulls** :/
@Marv95
I cannot recommend anything, you have to decide yourself.
But the first thing you need is to have a working phone back and check the CID of your device.
If it's 15 then you'll be able to install LOS. If it's 11 - you won't.
I'd have a look at this topic. No need to flash back a stock firmware, you may begin with COMBINATION_VZW_FA44_G900VVRU2APA1
Well awesome thanks so far, ill check the cid :good: do you have a link where i can get the G900VVRU2BOK3 - GALAXY S5 SM-G900V VZW USA firmware the sammobile download takes 2 hours
Edit: https://forum.xda-developers.com/verizon-galaxy-s5/development/vzwstock-based-tw-rom-t3281095 , this a right one (VZW_BOK3_ODEX_DEODEX_V2.zip)??
Marv95 said:
Well awesome thanks so far, ill check the cid :good: do you have a link where i can get the G900VVRU2BOK3 - GALAXY S5 SM-G900V VZW USA firmware the sammobile download takes 2 hours
Click to expand...
Click to collapse
I think this is it.
https://androidfilehost.com/?fid=24349802275799044
well first of all thank you so much the phone is working again but sadly cid shows 11 so no cm14.1...guess 13 wont work then either? will have a closer look for what to do next this evening my goal would be the most uptodate firmware (german language support would be the dream since somehow this verizonfirmware [like the old 4.4.4] only supports english)
Marv95 said:
guess 13 wont work then either?
Click to expand...
Click to collapse
The locked bootloader (that cannot be unlocked) matters, not CM/LOS version.
The locked bootloader cannot boot unsigned kernel, that's why you're limited to Touchwiz-based roms only.
my goal would be the most uptodate firmware (german language support would be the dream since somehow this verizonfirmware [like the old 4.4.4] only supports english)
Click to expand...
Click to collapse
German? Not a big problem. So Verizon is not your provider?
bbsc said:
The locked bootloader (that cannot be unlocked) matters, not CM/LOS version.
The locked bootloader cannot boot unsigned kernel, that's why you're limited to Touchwiz-based roms only.
German? Not a big problem. So Verizon is not your provider?
Click to expand...
Click to collapse
No i use a german Simcard (Netzclub) only the phone is a Verizon sent to me from the US
Marv95 said:
No i use a german Simcard (Netzclub) only the phone is a Verizon sent to me from the US
Click to expand...
Click to collapse
Well, I'm in the similar boat.
Let's see and decide. Netzclub means O2 network, which means B20 band for LTE, which is definitely not supported by device. So we can forget it.
German general CSC is DBT.
Ok, I'd say, your choice is this stock-like cleaned ROM for SM-G900F and the latest DQF2 firmware for SM-G900V. CSC must be DBT.
It's a little tricky to flash, but possible.
You'll have a phone that looks like F variant with German and so on.
But you won't have root.
Do you need root?
bbsc said:
Well, I'm in the similar boat.
Let's see and decide. Netzclub means O2 network, which means B20 band for LTE, which is definitely not supported by device. So we can forget it.
Click to expand...
Click to collapse
You mean i cant use LTE with that phone here in Germany? Actually never tried it before lol but was recently thinking bout switching provider to get the benefits
German general CSC is DBT.
bbsc said:
Ok, I'd say, your choice is this stock-like cleaned ROM for SM-G900F and the latest DQF2 firmware for SM-G900V. CSC must be DBT.
Click to expand...
Click to collapse
Ok so root the device, get custom recovery, install the rom and then flash the firmware G900FXXS1CQD4 - GALAXY S5 SM-G900F DBT Germany (Sammobile [CSC: G900FDBT1CQA1] even though its not for verizon phone) with odin?
bbsc said:
It's a little tricky to flash, but possible.
You'll have a phone that looks like F variant with German and so on.
But you won't have root.
Do you need root?
Click to expand...
Click to collapse
well would´ve played around with it a bit since i invested that much time to get used to this damn phone now but no actually i dont :laugh:
Marv95 said:
but no actually i dont :laugh:
Click to expand...
Click to collapse
Good decision.
Sorry, I'm a little busy at the moment, but I'll give you some directions ASAP.
You need to download:
1. This service firmware.
2. Alexndr's firmware (G900FXXU1CQG1_DevBase_v4.3.zip)
You do have Odin already.
You'll need some more files, I'll prepare them for you a little later.
Here we go.
1. Check if Reactivation Lock is disabled. Charge the battery to more than 50%.
2. Download Odin (you should already have it) and COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_2572656_REV00_user_mid_noship_MULTI_CERT.tar.md5 (link is in my previous post).
3. Download applications and firmware files - CID11_DBT.zip
4. Download ROM file - G900FXXU1CQG1_DevBase_v4.3.zip (link is in my previous post).
5. Run Odin.exe.
6. Select COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_2572656_REV00_user_mid_noship_MULTI_CERT.tar.md5 in Odin's AP slot, boot the phone into the download (Odin) mode, connect with USB cable to the computer, press Start, wait till the flash process is finished. Press Exit and wait for the phone to complete reboot.
7. Disconnect USB cable from the phone and connect again.
8. Unzip CID11_DBT.zip into the CID11_DBT forlder on the Desktop.
9. Copy everything from CID11_DBT folder to the root of phone's internal memory. IMPORTANT: options.prop should appear in the root of phone's memory, not in a subdirectory.
(Root means that root which you can see in your Windows File Explorer, not the absolute root from the phone's side. Really it's /sdcard/ from the phone's side.)
10. Copy ROM file G900FXXU1CQG1_DevBase_v4.3.zip to the root of phone's internal memory.
11. Disconnect the cable from the phone.
12. Press Menu (dotted button) - My Files - All - RootS5.
13. Apex_Launcher.apk - Settings - Unknown Sources - Ok - Back - Apex_Launcher.apk - Next - Install - Done.
14. BusyBox.apk - Install - Done.
15. Safestrap_KK.apk - Install - Done.
16. tr_v2.apk - Install - Open - make it rain (a message "You should have root, no reboot required" should appear) - Back.
17. Superuser.apk - Install - Open - Continue - Normal - Reboot.
18. After reboot, in the pop-up window - Apex Launcher - Always - Ok.
19. Menu (dotted button) - BusyBox Free - Grant - close balloon - Install - close balloon - Back.
20. Safestrap - Grant - Agree - Install Recovery - Reboot to recovery. Wait patiently for SafeStrap Recovery to boot.
21. Swipe to Allow modifications - Wipe - Advanced Wipe - Dalvik/Data/Cache - Swipe to Wipe.
22. Back - Back - Back - Install, install G900FXXU1CQG1_DevBase_v4.3.zip.
23. Back - Back - Mount - check System.
24. Back - Advanced - File manager - go to /sdcard/ and copy these files:
- /sdcard/build.prop - to /system/;
- /sdcard/others.xml - to /system/CSC/;
- /sdcard/others.xml - to /system/CSC/DBT/system/csc/.
25. Go to /system/, highlight build.prop, change file's permissions to 0644 (chmod 0644).
26. Go to /system/CSC/, highlight others.xml, change file's permissions to 0644 (chmod 0644).
27. Go to /system/CSC/DBT/system/csc/, highlight others.xml, change file's permissions to 0644 (chmod 0644).
28. Exit File manager pressing Back. In the main menu - Mount - uncheck System - Back - Install.
29. Install DQF2_Firmware_Bootloaders.zip. Then Reboot System - Do not install.
30. The phone will reboot. The first boot takes 10 min. or so.
After all you may erase all the files from the phone's memory or perform a factory reset from menu or Recovery.
Thanks ill try this evening after work :good::good::good:
Awesome mate, awesome thank you so much it worked without any problems :highfive::good::good:
Ok, glad it helped.
Now you have the most up-to-date SM-G900V: system - G900FXXU1CQG1 (changelist 9493471, security patch 2017-07-01) and firmware -G900VVRS2DQF2 (changelist 8025411, security patch 2017-07-01)
bbsc said:
Ok, glad it helped.
Now you have the most up-to-date SM-G900V: system - G900FXXU1CQG1 (changelist 9493471, security patch 2017-07-01) and firmware -G900VVRS2DQF2 (changelist 8025411, security patch 2017-07-01)
Click to expand...
Click to collapse
One more question somewhere between step 23 and 28 would it have been possible to install newest emoji package or even iphone emojis into systemfiles? or is it to late to just do all the steps above again
because i feel like i now see even less emotes than before
1. It cannot be late to revert the things back as you haven't done anything irreversible.
You can at any moment just flash a stock Verizon firmware and get a "stock" phone.
You can at any moment start with my guide from the beginning too.
2. You're right, after 23 but before 28 you have full access to /system and can install or copy something there.
3. Generally, you can leave Safestrap Recovery in the system.
On the one hand, you'll be able to access system files from time to time when you need.
On the other hand, some apps with higher security demands may not work (say, bank applications or so).
If you decide you need it, you'll have to install it after 22 before 23. Let me know and I'll give you necessary files.
P.S. I don't know what "emoji package" is. Maybe it can be installed as app or font or something that does not need direct /system access. It's always a good idea to place your data to /data, not to /system.
P.S. I don't know what "emoji package" is. Maybe it can be installed as app or font or something that does not need direct /system access. It's always a good idea to place your data to /data, not to /system.[/QUOTE]
More or less im talking bout this https://forum.xda-developers.com/general/general/mod-google-keyboard-unicode-9-10-emojis-t3348544/
bbsc said:
P.S. I don't know what "emoji package" is. Maybe it can be installed as app or font or something that does not need direct /system access. It's always a good idea to place your data to /data, not to /system.
Click to expand...
Click to collapse
More or less im talking bout this https://forum.xda-developers.com/general/general/mod-google-keyboard-unicode-9-10-emojis-t3348544/
First of all, I'm not the responsable for none of this great development work and I'll try to link every step to the source where I found each one and credit it to the right person.
I thought was important to post it here because, thanks to the Samsung, the Galaxy Note 10.1 have too many different device specs under the same product name and the internet is crowded with wrong tutorials or misleads.
If I said something wrong in this post, feel free to correct me or delete it if necessary.
The user Skyjumper at android-hilfe.de forum shared his experience testing an unofficial version of LineageOS 14.1 for GT-N8000 (2012) in GT-N8020 (2013). He also linked two XDA permalinks for comments with links to [1] TWRP 3.0.2 (by Aramir_, at here) and [2] LineageOS 14.1 unofficial (by lirokoa, at here). Then you have just to download the openGAPPS (I would suggest pico version), the Odin3 and the LineageOS add-on for SU (optional for who want SU access).
DOWNLOAD FILES
I uploaded every file for this tutorial to Google Drive because most of the websites have low speed traffic control, but feel free to download from where you want.
Odin3 v3.13.1 [xda] [gdrive]
Samsung Stock Rom [gdrive]
TWRP 3.0.2 [xda] [gdrive]
LineageOS 14.1 Unofficial [xda] [gdrive] - copy this file to your SDcard to be accessed by TWRP
LineageOS Add-on for Super User [lineageos] [gdrive] - copy this file to your SDcard to be accessed by TWRP
GAPPS [open GAPPS] [gdrive - pico] - copy this file to your SDcard to be accessed by TWRP
STEP 0 - go back to stock ROM throught Odin (just to be sure) *OPTIONAL
Activate the Developer Mode by tapping seven times the VERSION NUMBER ate ABOUT TABLET menu;
Activate the USB Debug at the development menu;
Restart the tablet in Download Mode (power button + volume down);
Open Odin and plug usb from tablet to computer, then select the stock ROM file (you have to extract the RAR file and use the *.tar.md5 file) and click start.
STEP 1 - install the custom recovery TWRP 3.0.2 throught Odin
Activate the Developer Mode by tapping seven times the VERSION NUMBER ate ABOUT TABLET menu;
Activate the USB Debug at the development menu;
Restart the tablet in Download Mode (power button + volume down);
Open Odin and plug usb from tablet to computer, then select the TWRP tar file and click start; at this point, the device will reboot and you have to be fast and hold power button + volume up to boot in recovery mode (if the system reboot, it will replace the custom recovery back to the default one and you will have to install the TWRP again with Odin.
STEP 2 - install the LineageOS and others tools throught the new TWRP - (only reboot at the end of the entire step)
In the TWRP, click WIPE, then ADVANCED WIPE and select CACHE and SYSTEM and wipe it, then click to FORMAT DATA to format it too;
Back to main screen, click INSTALL, select the SDcard storage and navigates until the LineageOS 14.1 zip file and swipe to instal;
Go back and click INSTALL again, and select the Google Apps file and swipe to install;
*OPTIONAL - Go again to INSTALL and select the the LineageOS add-on for Super User;
Reboot the system and do the initial configuration.
Know issues
The default device name at bluetooth configuration becomes GT-N8000, and you may want to change it back to GT-N8020 or any other you want;
The virtual keyboard starts hidden by default, then, at the initial configuration, when you will type your wifi password, you will have to activate the virtual keyboard visibility in the right bottom corner;
The configuration or MPT apps may stop working at the boot time, but just click the option to close and it will restart;
All the build mention at /system/build.prop is now N8000. I tried to edit the file to fit the real spes, but, to be honest, I don't really know what this really means, but still works properly to me.
Unknow issues
I couldn't test the SIM card usages and bluetooth yet. I'll try to edit this post when possible.
Additional steps
To activate the Super User, activate the Developer Mode (same as steps 0 or 1) then activate it at the Development menu;
The pico version of Google Apps installs only the necessary to run the Google Play app, now you may want to install the rest of essential google apps that you use.
Confused by title .
This is a Lineage 14.1 for N8020 ?
JJEgan said:
Confused by title .
This is a Lineage 14.1 for N8020 ?
Click to expand...
Click to collapse
Yes, sir. Sorry the confusion.
I was looking for it, thanks!
Any solution for fix Bluetooth?
Inviato dal mio Redmi Note 5 utilizzando Tapatalk
Has anyone installed and can give more information about the operation? Did you use SIM mobile internet?
not for n8020
doiiido said:
I was looking for it, thanks!
Click to expand...
Click to collapse
Tested here, works all ok but the sim card, it is not even recognizing, came from stock n8020 rom.
I'll try to flash an n8000 rom and see if it makes any diff.
---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------
doiiido said:
Tested here, works all ok but the sim card, it is not even recognizing, came from stock n8020 rom.
I'll try to flash an n8000 rom and see if it makes any diff.
Click to expand...
Click to collapse
To flash it I had to modyfy the install script and take off the first assert line, because its target is n8000 and not n8020.
what changes did u make from the original lineageos 14.1 20170810 version?
Best Regards, Lincoln.
Has somebody else already tested this adaption for a N8020?
Atlante2004 said:
Has somebody already tested this adaption in a N8020?
Click to expand...
Click to collapse
READ the thread .
Someone else, I meant
installed on my n8020. Confirm not working Bluetooth and Sim
Bluetooth is a known Lineage problem.
Sim can be modem .
JJEgan said:
Bluetooth is a known Lineage problem.
Sim can be modem .
Click to expand...
Click to collapse
sim with official sasmung rom 4.4.2 Work 100%
With lineage 14.1 No Work
Yes..two different roms.
One samsung one not samsung.
Suggest you to read OP before flashing a rom.
As said change modem and CSC.
JJEgan said:
Yes..two different roms.
One samsung one not samsung.
Suggest you to read OP before flashing a rom.
As said change modem and CSC.
Click to expand...
Click to collapse
I know it's two different ROMs.
However it works very well. We hope the Lineage will release an official version for the GT N8020
Fastjoy said:
I know it's two different ROMs.
However it works very well. We hope the Lineage will release an official version for the GT N8020
Click to expand...
Click to collapse
LineageOS isn't going to release it. There is maintainers for each device, and if someone wants to do so for the Galaxy Note 10.1, they can do so. There is hundreds of maintainers.
secretwolf98 said:
LineageOS isn't going to release it. There is maintainers for each device, and if someone wants to do so for the Galaxy Note 10.1, they can do so. There is hundreds of maintainers.
Click to expand...
Click to collapse
Galaxy Note 10.1 2014 or Galaxy Note 10.1 2012 (gt n8020) ?
This is 2012 version forum
How do you unlock the bootloader?
Fastjoy said:
Galaxy Note 10.1 2014 or Galaxy Note 10.1 2012 (gt n8020) ?
Click to expand...
Click to collapse
2012. The 2014 is already supported. Don't attempt to install it, it has different hardware and specs.