BOD5 to root? - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

I've been looking the past two days and can't figure out how to root a BOG5 phone.
Any help? Or is it even possible?

CorneliusRox said:
I've been looking the past two days and can't figure out how to root a BOD5 phone.
Any help? Or is it even possible?
Click to expand...
Click to collapse
Look at the stickies. Downgrade, root, upgrade

ldeveraux said:
Look at the stickies. Downgrade, root, upgrade
Click to expand...
Click to collapse
Shouldn't that be as simple as downloading 4.4.4 firmware and flashing it with ODIN?
The only thing I can successfully flash my phone with it a stock .tar to BOD5 again after I get it suck at the half download screen.

CorneliusRox said:
Shouldn't that be as simple as downloading 4.4.4 firmware and flashing it with ODIN?
The only thing I can successfully flash my phone with it a stock .tar to BOD5 again after I get it suck at the half download screen.
Click to expand...
Click to collapse
So you're on BOD5 and you try to root? what firmware you want to upgrade to? Once you provide the info I will provide the instructions.

buhohitr said:
So you're on BOD5 and you try to root? what firmware you want to upgrade to? Once you provide the info I will provide the instructions.
Click to expand...
Click to collapse
Basically, I just want to root so I can debloat my phone. I'd like to stay on 5.0, just rooted, but I can't figure it out.
If I OTA'd to BOG5, is it possible to root still?

CorneliusRox said:
Basically, I just want to root so I can debloat my phone. I'd like to stay on 5.0, just rooted, but I can't figure it out.
If I OTA'd to BOG5, is it possible to root still?
Click to expand...
Click to collapse
Currently what firmware you are running right now? If you already OTA to OE1 or OG5 you CAN'T ROOT ANYMORE. SO DON'T DO IT.

Related

[Q] Galaxy S4 Root

I rooted my AT&T Galaxy S4 i337 a while back using Motochopper and it worked absolutely fine. After installing Cyanogenmod, I decided to go back to stock. I used triangle away and Odin to return myself back to stock, however, I always had issues. When I would recovery boot, I got an error and I couldn't wipe my cache partition. I tried to re-root my phone today using Motochopper and then Odin, but neither of them worked. I got a fail on both of them. Motochopper installed Supersu on my device, but didn't actually give me root access, and Odin just gave me a fail. Now, my phone is working with stock, but I still get errors in recovery mode and I can't root. Can someone please help!?
What is your baseband and build number on settings, more, about phone?
jd1639 said:
What is your baseband and build number on settings, more, about phone?
Click to expand...
Click to collapse
Baseband - I337UCUAMF3
Build Number - JDQ39.I337UCUAMF3
I
cfoughty7 said:
Baseband - I337UCUAMF3
Build Number - JDQ39.I337UCUAMF3
Click to expand...
Click to collapse
That's what i was afraid of. With mf3 you can't root with motorchopper or flash roms like you could on mdl. You also can't put on a custom recovery. Give me a second and I'll give you some links.
http://forum.xda-developers.com/showthread.php?p=44165374
http://forum.xda-developers.com/showthread.php?p=42478710
http://forum.xda-developers.com/showthread.php?p=45186518
http://forum.xda-developers.com/showthread.php?p=45971194
Read these before you do anything else and get familiar with them.
cfoughty7 said:
Baseband - I337UCUAMF3
Build Number - JDQ39.I337UCUAMF3
Click to expand...
Click to collapse
MF3 has a completely different root and recovery method now. Search the threads and you'll find them. Unfortunately it's pretty risky as you won't be able to flash back to stock using ODIN on MF3.
Sent from my Samsung Galaxy S4 (SGH-i337) via Tapatalk 4
jd1639 said:
I
That's what i was afraid of. With mf3 you can't root with motorchopper or flash roms like you could on mdl. You also can't put on a custom recovery. Give me a second and I'll give you some links.
http://forum.xda-developers.com/showthread.php?p=44165374
http://forum.xda-developers.com/showthread.php?p=42478710
http://forum.xda-developers.com/showthread.php?p=45186518
http://forum.xda-developers.com/showthread.php?p=45971194
Read these before you do anything else and get familiar with them.
Click to expand...
Click to collapse
I'm just confused as to why I was able to do it perfectly before?
cfoughty7 said:
I'm just confused as to why I was able to do it perfectly before?
Click to expand...
Click to collapse
Because you were on mdl firmware. After you Odin'd it had to have taken the ota update to mf3.
shall plyinuf
jd1639 said:
Because you were on mdl firmware. After you Odin'd it had to have taken the ota update to mf3.
Click to expand...
Click to collapse
Ohhh, ok. I understand! There's no way to get it back? Is that what I should read those links for?
cfoughty7 said:
Ohhh, ok. I understand! There's no way to get it back? Is that what I should read those links for?
Click to expand...
Click to collapse
Ok, so I read the links. Now, I'm not so much interested in rooting as I am getting my phone straight. Is there any way to get back to mdl? Will the rumored 4.3 update this month fix that? When I tried to update or recover with Samsung Kies, it said my phone wasn't compatible to recover. Does that mean I won't be able to get the update?
jd1639 said:
Because you were on mdl firmware. After you Odin'd it had to have taken the ota update to mf3.
Click to expand...
Click to collapse
Ok, so I read the links. Now, I'm not so much interested in rooting as I am getting my phone straight. Is there any way to get back to mdl? Will the rumored 4.3 update this month fix that? When I tried to update or recover with Samsung Kies, it said my phone wasn't compatible to recover. Does that mean I won't be able to get the update?
cfoughty7 said:
Ok, so I read the links. Now, I'm not so much interested in rooting as I am getting my phone straight. Is there any way to get back to mdl? Will the rumored 4.3 update this month fix that? When I tried to update or recover with Samsung Kies, it said my phone wasn't compatible to recover. Does that mean I won't be able to get the update?
Click to expand...
Click to collapse
First, there is no way to go back to mdl. Idk if you'll be able to get the 4.3 update but I would assume so since you are on the stick firmware now. But, each new update is going to make it harder to root your phone or run custom roms. So you probably need to choose whether you want to keep your phone stock and take updates if and when they come out. Or have some snooty to run custom roms and root your device and put safestrap on.
jd1639 said:
First, there is no way to go back to mdl. Idk if you'll be able to get the 4.3 update but I would assume so since you are on the stick firmware now. But, each new update is going to make it harder to root your phone or run custom roms. So you probably need to choose whether you want to keep your phone stock and take updates if and when they come out. Or have some snooty to run custom roms and root your device and put safestrap on.
Click to expand...
Click to collapse
I'm going to stay with stock. Will the mdl thing effect anything if I have an issue with warranty sterf?
Shouldn't, your stock mf3 right now.

i messed up bid time

so I have been on vision x rom for last couple months. I had a guy flash the stock rom back on my phone and now I have an att update aprox 359mb ready to install BUT I cannot update it. after update completes it boots into twrp. how can I uninstall twrp or is it something I missing. thanks for your help in advance. NOOB here
Do you know what firmware you're on? I don't what stock rom the guy flashed but it must not have been the stock firmware or you wouldn't have twrp.
jd1639 said:
do you know what firmware you're on? I don't what stock rom the guy flashed but it must not have been the stock firmware or you wouldn't have twrp.
Click to expand...
Click to collapse
it shows 4.2.2
JSUMNERS said:
it shows 4.2.2
Click to expand...
Click to collapse
Are you on MDB/MDL or MF3?
Edit: must be MDB/MDL if you still have custom recovery?
JSUMNERS said:
it shows 4.2.2
Click to expand...
Click to collapse
What are the last three characters on your base band
rayburne said:
are you on mdb/mdl or mf3?
Edit: Must be mdb/mdl if you still have custom recovery?
Click to expand...
Click to collapse
im sorry im noob to the 10th......baseband version 1337ucuamdb
JSUMNERS said:
im sorry im noob to the 10th......baseband version 1337ucuamdb
Click to expand...
Click to collapse
Your are on mdb firmware. If flashing custom roms is important to you what I would do is use Odin to upgrade you to mdl firmware. That is probably the same firmware that you have the update for based on its small size. If you use Odin you will lose root and twrp. But you'll be able to put those back on.
jd1639 said:
your are on mdb firmware. If flashing custom roms is important to you what i would do is use odin to upgrade you to mdl firmware. That is probably the same firmware that you have the update for based on its small size. If you use odin you will lose root and twrp. But you'll be able to put those back on.
Click to expand...
Click to collapse
what im trying to attempt is to totally get back to stock everything with no root. I would like to get the update from july which is avail for me and then get the ota for 4.3 in november.... Totally stock. Is this possible ?
JSUMNERS said:
what im trying to attempt is to totally get back to stock everything with no root. I would like to get the update from july which is avail for me and then get the ota for 4.3 in november.... Totally stock. Is this possible ?
Click to expand...
Click to collapse
Yes, by flashing the mdl firmware in Odin
Thanks you very much. Now time to download odin and do research on xda forums.... Wish me luck
JSUMNERS said:
Thanks you very much. Now time to download odin and do research on xda forums.... Wish me luck
Click to expand...
Click to collapse
If you run into problems just ask. The firmware you can get from sammobile.com. You have to register but it's free.
JSUMNERS said:
what im trying to attempt is to totally get back to stock everything with no root. I would like to get the update from july which is avail for me and then get the ota for 4.3 in november.... Totally stock. Is this possible ?
Click to expand...
Click to collapse
Are you sure you want to take that update (I'm assuming it's the MF3 update)?
If you do, you will be limited to using safestrap and the custom roms you can flash in the future.
If you stay at MDL, you can still install a custom 4.3 rom (or the stock 4.3 release without bootloaders once it's available).
You can even install stock MF3 without the bootloaders from the dev section to get the update.
If you want to have an unlocked bootloader and have complete freedom to flash whatever you want on your phone, you only want to update to MDL as mentioned above and not take the MF3 update.
Once your at official OTA MF3, your bootloader is locked and there is no turning back (just trying to help and make sure you are aware of what happens if you take the OTA and upgrade to MF3).
Good Luck
JSUMNERS said:
so I have been on vision x rom for last couple months. I had a guy flash the stock rom back on my phone and now I have an att update aprox 359mb ready to install BUT I cannot update it. after update completes it boots into twrp. how can I uninstall twrp or is it something I missing. thanks for your help in advance. NOOB here
Click to expand...
Click to collapse
Heimdall is your friend , safer than Odin. http://forum.xda-developers.com/showthread.php?t=2374441&highlight=heimdall
jakew02 said:
heimdall is your friend , safer than odin. http://forum.xda-developers.com/showthread.php?t=2374441&highlight=heimdall
Click to expand...
Click to collapse
ok so i havent unrooted yet. Still researching. My problem is now that when i power the phone on it shows custom with the open pad lock. But but when i run root checker basic is says im not rooted. Im confused and need help please. Sorry for being so ignorant but im learning
Sorry again but im still confused as to why it still has pad lock on start up but root checker says no root. I am so stupid im sorry but i need help please
JSUMNERS said:
Sorry again but im still confused as to why it still has pad lock on start up but root checker says no root. I am so stupid im sorry but i need help please
Click to expand...
Click to collapse
Go get Triangle Away. That helped me get rid of the pad lock.
---------- Post added at 09:48 PM ---------- Previous post was at 09:43 PM ----------
risensunx said:
Go get Triangle Away. That helped me get rid of the pad lock.
Click to expand...
Click to collapse
Read this thread. http://forum.xda-developers.com/showthread.php?t=2319251

ROOT

is there any way too root Marshmallow on locked booloader?:fingers-crossed:
_wal2rosario said:
is there any way too root Marshmallow on locked booloader?:fingers-crossed:
Click to expand...
Click to collapse
Not yet. Patience.
Stupifier said:
Not yet. Patience.
Click to expand...
Click to collapse
Notice me when this is already. Thanks
Ready but only for unlocked bl
_wal2rosario said:
Notice me when this is already. Thanks
Click to expand...
Click to collapse
It is nobody's responsibility to notify you when root is achieved on MM. It is YOUR responsibility to check back in the forums and do a little searching and reading to find out if root has been achieved on MM.
landshark68 said:
It is nobody's responsibility to notify you when root is achieved on MM. It is YOUR responsibility to check back in the forums and do a little searching and reading to find out if root has been achieved on MM.
Click to expand...
Click to collapse
It is a way to say.
Nandr0idC0nsumer said:
Ready but only for unlocked bl
Click to expand...
Click to collapse
If I'm on stock 6.0.1, how to go about downgrading re-unlocking my BL and then getting rooted MM? I was unlocked prior, but locked to take the OTA...
talktosamson said:
If I'm on stock 6.0.1, how to go about downgrading re-unlocking my BL and then getting rooted MM? I was unlocked prior, but locked to take the OTA...
Click to expand...
Click to collapse
Odin the full stock PB1 tar
Nandr0idC0nsumer said:
Odin the full stock PB1 tar
Click to expand...
Click to collapse
Very doubtful you can downgrade that file from a locked marshmallow ROM via Odin
Sent from my SM-G900V using XDA-Developers mobile app
Wired4Fun said:
Very doubtful you can downgrade that file from a locked marshmallow ROM via Odin
Sent from my SM-G900V using XDA-Developers mobile app
Click to expand...
Click to collapse
I've done it before. You can.
Was on MM, and downgraded to PB1, got root, unlocked bootloader, went back to MM and currently running Phoenix rom. It can be done.. Search the forums.. The info is there..
djr4x4 said:
Was on MM, and downgraded to PB1, got root, unlocked bootloader, went back to MM and currently running Phoenix rom. It can be done.. Search the forums.. The info is there..
Click to expand...
Click to collapse
Hey I've just been browsing the forums and catching up on all the new stuff. Last time I was here there was no hope of a bootloader unlocked. I finally upgraded from kit Kat and unlocked mine. I want to try some MM Roms but I'm not sure how to get back to LP then?? Is there a way to get back and keep root? Or would I have to go back to completely stock pb1 and root and start over. Thanks

hoy to root galaxy s5 g900v Android 6.0.1

Hello, I hace a galaxy s5 verizon, g900v and I would like too root it, hoy can I root my phone, I would apreciate if someone can help me, thanks in advance
Read this thread here http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
Your answer should be there because it's been said that you're able to...read, read and read more before asking Dev's help. It should all be in the OP
Also, there's already numerous threads asking this.....just saying....
al50 said:
Read this thread here http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
Your answer should be there because it's been said that you're able to...read, read and read more before asking Dev's help. It should all be in the OP
Also, there's already numerous threads asking this.....just saying....
Click to expand...
Click to collapse
I think the link you gave is for LL, not for MM that he ask for.
A San said:
I think the link you gave is for LL, not for MM that he ask for.
Click to expand...
Click to collapse
MM can't be rooted. LL can. You have to revert back to LL in order to root. That's why he provided that link.
Sent from my SM-G900V using XDA-Developers mobile app
landshark68 said:
MM can't be rooted. LL can. You have to revert back to LL in order to root. That's why he provided that link.
Sent from my SM-G900V using XDA-Developers mobile app
Click to expand...
Click to collapse
but what if you unlock the bootloader and put it to pdf4?
Have to have root so u can unlock and also have to have a 15 emmc phone..
Sent from my SM-G935V using Tapatalk
djr4x4 said:
Have to have root so u can unlock and also have to have a 15 emmc phone..
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
How do I find out if I have a 15 emmc phone? I was able to unlock the bootloader on PB1 and then upgrade to PF4 then I installed the PF4 stock deodexed but when I tried to install v85 of xposed my verizon screen stayed lol. I read on reddit someone unlocked it then put Cyanogen. Is this possible?
If u have unlocked once before then u r good
Sent from my SM-G935V using Tapatalk
djr4x4 said:
If u have unlocked once before then u r good
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
oh ok lol so once I put the PF4 rom I can wipe and put Cyanogen? sorry haven't rooted since Evo 4g lol
wicked_g said:
How do I find out if I have a 15 emmc phone? I was able to unlock the bootloader on PB1 and then upgrade to PF4 then I installed the PF4 stock deodexed but when I tried to install v85 of xposed my verizon screen stayed lol. I read on reddit someone unlocked it then put Cyanogen. Is this possible?
Click to expand...
Click to collapse
In the play store, download eMMC Brickbug Check. Your CID should start with 11 or 15. Sounds like if you unlocked the bootloader on PB1 and upgraded to PF4, you probably have 15.
So I just got an Asurion insurance replacement G900V, old one was rooted on 4.4
New one is PF4 6.0.1 and emmc starts with 11.
What can I do with it? can I root it at all?
cjschriver3 said:
So I just got an Asurion insurance replacement G900V, old one was rooted on 4.4
New one is PF4 6.0.1 and emmc starts with 11.
What can I do with it? can I root it at all?
Click to expand...
Click to collapse
You can root it with Android 5.0.
OtikaTenkawa said:
You can root it with Android 5.0.
Click to expand...
Click to collapse
I'm in the same boat as @cjschriver3. Is there a link with instructions to downgrade, root, then put it back to 6.0.1? Putting it back to 6.0.1 can be optional.
Tango Cheetahs said:
I'm in the same boat as @cjschriver3. Is there a link with instructions to downgrade, root, then put it back to 6.0.1? Putting it back to 6.0.1 can be optional.
Click to expand...
Click to collapse
I didn't do a downgrade, I just rooted mine with this tutorial: http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/
I guess you just need to find a suitable downgrade tutorial.
OtikaTenkawa said:
I didn't do a downgrade, I just rooted mine with this tutorial: http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/
I guess you just need to find a suitable downgrade tutorial.
Click to expand...
Click to collapse
Did you follow the instructions under "Prepare to Root?" If you did, you downgraded to PB1 (LL, Android 5.0). I followed the guide yesterday and got root, but I don't wanna unlock my bootloader to upgrade to PF4 kernal and bootloader. Last time I unlocked the bootloader, I lost my 4G. Otherwise, the guide by @jrkruse is really good ^_^ Just have the issue of not being able to run safestrap to do the last step (Flashing Knox Removal). Guess I'll just start from scratch and flash the PB1 retail image and try again.
Tango Cheetahs said:
Did you follow the instructions under "Prepare to Root?" If you did, you downgraded to PB1 (LL, Android 5.0). I followed the guide yesterday and got root, but I don't wanna unlock my bootloader to upgrade to PF4 kernal and bootloader. Last time I unlocked the bootloader, I lost my 4G. Otherwise, the guide by @jrkruse is really good ^_^ Just have the issue of not being able to run safestrap to do the last step (Flashing Knox Removal). Guess I'll just start from scratch and flash the PB1 retail image and try again.
Click to expand...
Click to collapse
Hey Tango, just so that I am clear, are you saying you were able to root your S5 that was on MM with jrkruse's instructions?
EDIT:
I was able to root my Samsung S5 Galaxy on PJ2 with jrkruse's method
i have a g900v with the pg2 update(android 6.0.1) and cid 11. i've read through the various guides to get root, which involves downgrading to pb1 and rooting that. once i get pb1 rooted, is there a way to upgrade back to mm(pd1, p4, pg2 or pj2) the latest pj2 update and keep root? or will i be stuck on pb1 if i want to keep root?
altwu said:
i have a g900v with the pg2 update(android 6.0.1) and cid 11. i've read through the various guides to get root, which involves downgrading to pb1 and rooting that. once i get pb1 rooted, is there a way to upgrade back to mm(pd1, p4, pg2 or pj2) the latest pj2 update and keep root? or will i be stuck on pb1 if i want to keep root?
Click to expand...
Click to collapse
As mentioned numerous times and throughout a good many top threads in the General Section of this VZW Forum, the answer is no if you have the CID 11 to be able to root or keep root once on MM
al50 said:
As mentioned numerous times and throughout a good many top threads in the General Section of this VZW Forum, the answer is no if you have the CID 11 to be able to root or keep root once on MM
Click to expand...
Click to collapse
got it. thanks.
Are there any currently working root methods for a device that is on VZW stock PG2 wth emmc 15?

Stuck on PD1 :(

Tried to update to rooted MM from rooted 5.0 with dev bootloader. Long story short, I lost root and am now on PD1, with PD1 bootloader. I installed the NK2 kernel to try and re-root, but the phone just hangs on the Samsung screen. I have tried Odining back the whole OS to Nk2, and Odin keeps giving me a "FAIL" message.. The only OS that seems to flash without failing is PD1. Any thoughts? Any help/insight would be greatly appreciated. THank you in advance.
kotuamoalt said:
Tried to update to rooted MM from rooted 5.0 with dev bootloader. Long story short, I lost root and am now on PD1, with PD1 bootloader. I installed the NK2 kernel to try and re-root, but the phone just hangs on the Samsung screen. I have tried Odining back the whole OS to Nk2, and Odin keeps giving me a "FAIL" message.. The only OS that seems to flash without failing is PD1. Any thoughts? Any help/insight would be greatly appreciated. THank you in advance.
Click to expand...
Click to collapse
cant you downgrade to pb1? downgrade it to pb1 i think it can be downgraded with odin then follow steps from the guide who unlocked bootloader and in general section there is guide to upgrade to mm with rooted and debloated but you need to use the bootloader unlocking thread to install the rom i did it 3 hours ago
shahram Ali said:
cant you downgrade to pb1
Click to expand...
Click to collapse
I AM AT PB1. Thus the title: "Stuck at PB1" I am trying to DOWNGRADE to NK2. (or something rootable)
kotuamoalt said:
I AM AT PB1. Thus the title: "Stuck at PB1" I am trying to DOWNGRADE to NK2. (or something rootable)
Click to expand...
Click to collapse
this is rootable http://www.sammobile.com/firmwares/download/66252/G900VVRU2BPB1_G900VVZW2BPB1_VZW/
downgrade to it and as i said use the threads to install 6.0 with root and dev bootloader bro
and you cant downgrade to kitkat now but this LL can be rooted flash it and search for rooting thread for LL
shahram Ali said:
cant you downgrade to pb1
Click to expand...
Click to collapse
I don't think that will help me. I want to root. Unless things have changed, I need to roll back to NK2.
shahram Ali said:
this is rootable http://www.sammobile.com/firmwares/download/66252/G900VVRU2BPB1_G900VVZW2BPB1_VZW/
downgrade to it and as i said use the threads to install 6.0 with root and dev bootloader bro
and you cant downgrade to kitkat now but this LL can be rooted flash it and search for rooting thread for LL
Click to expand...
Click to collapse
MY BAD. I am at PD2. PB1 is rootable and PD2 is not? I wish h I had just stayed at rooted OK3.
I don't suppose you have a link?
kotuamoalt said:
MY BAD. I am at PD2. PB1 is rootable and PD2 is not? I wish h I had just stayed at rooted OK3.
I don't suppose you have a link?
Click to expand...
Click to collapse
that is bad but if you downgrade to any lollipop you will have some hope bro try and dont give up
shahram Ali said:
cant you downgrade to pb1? downgrade it to pb1 i think it can be downgraded with odin then follow steps from the guide who unlocked bootloader and in general section there is guide to upgrade to mm with rooted and debloated but you need to use the bootloader unlocking thread to install the rom i did it 3 hours ago
Click to expand...
Click to collapse
Unfortunately, after installing the NK2 kernel, my phone would hang @ Samsung start screen.
kotuamoalt said:
Unfortunately, after installing the NK2 kernel, my phone would hang @ Samsung start screen.
Click to expand...
Click to collapse
cause NK2 kernel is for 4.4.4 or 4.4.2 not 5.0 or 6.0.1 dude are you creazy try lollipop kernels it is my 9hours with verzion mobile so im nooby too but you should try
shahram Ali said:
that is bad but if you downgrade to any lollipop you will have some hope bro try and dont give up
Click to expand...
Click to collapse
I am pretty much resigning myself that I am going to be stuck on PD1, unrooted.. I am having trouble downloading the file, and when it does work, it is SLOOW, so maybe tomorrow I can give it one last try.
kotuamoalt said:
I am pretty much resigning myself that I am going to be stuck on PD1, unrooted.. I am having trouble downloading the file, and when it does work, it is SLOOW, so maybe tomorrow I can give it one last try.
Click to expand...
Click to collapse
good luck bro
shahram Ali said:
cause NK2 kernel is for 4.4.4 or 4.4.2 not 5.0 or 6.0.1 dude are you creazy try lollipop kernels it is my 9hours with verzion mobile so im nooby too but you should try
Click to expand...
Click to collapse
I was also unable to flash the entire NK2 firmware. And yes I am crazy.

Categories

Resources