Database Users

[Guide] Flash OTAs with TWRP (OS 2.1.3/ 005)

Firstly, you cannot install OTA's with TWRP. You'll have to get back to stock recovery in order to install patches.
Thanks to @eng.stk, with the recovery compiled from source, we now can flash OTA Zips from TWRP.
Download TWRP 2.8.7.0: http://forum.xda-developers.com/devdb/project/dl/?id=15364
Download the following OTA's and move them to internal/external storage and proceed to install them from TWRP.
OxygenOS_X_Rom.zip (003)
OTA Patch 003-004.zip
OTA Patch 004-005.zip (Uploaded by @Razertje)
____
Stock Recovery (Just in case if someone requires it)
- Stock_Recovery.img

I got an error when I try to flash it

PoloB49 said:
I got an error when I try to flash it
Click to expand...
Click to collapse
Are you rooted? Did you flash TWRP recovery?

PoloB49 said:
I got an error when I try to flash it
Click to expand...
Click to collapse
It's most likely that you tampered the system and recovery partition. I uploaded the stock recovery here, flash the stock recovery, then flash to system dump, then this patch.

Well, i did a nandroid backup before getting rooted, i tried to restore my phone so i could properly do the ota, but now there is no OS installed
But my computer still detect my phone, where can i download the full rom please ?

PoloB49 said:
Well, i did a nandroid backup before getting rooted, i tried to restore my phone so i could properly do the ota, but now there is no OS installed
But my computer still detect my phone, where can i download the full rom please ?
Click to expand...
Click to collapse
It's at the front page. http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996

SpiritBreak3r said:
It's at the front page. http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996
Click to expand...
Click to collapse
Thanks, i wasn't sure it was the full rom because of the "ota" in the name.

SpiritBreak3r said:
It's most likely that you tampered the system and recovery partition. I uploaded the stock recovery here, flash the stock recovery, then flash to system dump, then this patch.
Click to expand...
Click to collapse
hey i did as you said to try and get the update but i have a question. what does flash to system dump mean?
Already flashed stock recovery. next step?

Savya said:
hey i did as you said to try and get the update but i have a question. what does flash to system dump mean?
Already flashed stock recovery. next step?
Click to expand...
Click to collapse
By flashing the system dump I meant, install this zip package http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996. This zip package is stock system dump bearing version 03. Then flash to 03-04 patch.

is this OTA solved the problem with microsd cards?

Can anybody help with a generic error trying to flash the stock recovery again?
No reason why just says failed. I am rooted with TWRP and trying to revert to stock to be able to OTA. Last android was a nexus 4 and been away a little while so I may be missing something.. I don't want to have to wipe all my data and such can somebody assist and refresh my understanding?

Dizzyrul3z: No, microSD card issue remains according to official forum--next OTA I bet.
I'm rooted, TWRP also errored when I attempted the OTA installed.
So to clarify, using TWRP I want to install three zips: stock rom, OTA03 (system dump), and OTA04 (update), wipe cache/dalvik. Correct?
Question: I install them all at once in TWRP, right? Will any of this erase my apps/data?
Thanks,

Dizzyrul3z said:
is this OTA solved the problem with microsd cards?
Click to expand...
Click to collapse
I don't know about you guys, but I have the E-1003 model, SD card is working fine. I have a Samsung EVO+ 32GB card.
BakedGoodsX said:
Dizzyrul3z: No, microSD card issue remains according to official forum--next OTA I bet.
I'm rooted, TWRP also errored when I attempted the OTA installed.
So to clarify, using TWRP I want to install three zips: stock rom, OTA03 (system dump), and OTA04 (update), wipe cache/dalvik. Correct?
Question: I install them all at once in TWRP, right? Will any of this erase my apps/data?
Thanks,
Click to expand...
Click to collapse
You need to flash to Stock recovery as well. I'll be updating the OP.

So this update is newer than the one mentioned here right ? : https://forums.oneplus.net/threads/oxygenos-2-1-2-will-start-roll-out-to-oneplus-x-today.402637/
Thanks

SpiritBreak3r said:
Just received this OTA mins ago.
Size: 17MB
https://drive.google.com/file/d/0B3AIip-hiOnNb1pBeGNlcUIyYmc/view?usp=sharing
Instructions:
1. Switch to Stock Recovery if you're running TWRP. But how to do it? Restore this backup from TWRP.
2. Flash the system dump available at this thread.
3. Now flash this update/patch.
4. Then fastboot flash TWRP recovery if you only need it.
Just my 2 cents, boot TWRP instead of flashing it. I personally suggest.
Code:
fastboot boot twrp_directory_of_your_pc.img
PSA: You'll need Stock recovery to patch official updates.
PS: My Memory Card is working exceptionally fine. I am using a Samsung EVO+ 32GB.
Click to expand...
Click to collapse
I can't restore the stock recovery.
in TWRP:
error flashing zip '/sdcard/*/oneplusx_x_stock_recovery.zip'
I also copied the zip into the TWRP backup folder, but can't select it to restore.
TWRP ist v.2.8.7.0
What am I doing wrong?
...rebooting the device from TWRP is also not working, anybody with the same problem?

umpalumpa1799 said:
I can't restore the stock recovery.
in TWRP:
error flashing zip '/sdcard/*/oneplusx_x_stock_recovery.zip'
I also copied the zip into the TWRP backup folder, but can't select it to restore.
TWRP ist v.2.8.7.0
What am I doing wrong?
...rebooting the device from TWRP is also not working, anybody with the same problem?
Click to expand...
Click to collapse
Extract the recovery.img from the zip file and flash it from fastboot:
Code:
fastboot flash recovery recovery.img

CafeKampuchia said:
Extract the recovery.img from the zip file and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
so rename the recovery.emmc.win from the zip file to recovery.img and flash it with fastboot.

umpalumpa1799 said:
so rename the recovery.emmc.win from the zip file to recovery.img and flash it with fastboot.
Click to expand...
Click to collapse
even better, download the img from the op.

SpiritBreak3r said:
even better, download the img from the op.
Click to expand...
Click to collapse
my fault, I downloaded the stock recovery from a nother post

Thank you for the update OP.
To clarify, when you say '...stick with stock recovery, disable the apps instead of deleting them...' what exactly does that mean?

[ROOT] Root for Stock MRA58N (System/Systemless) (Wi-Fi/LTE)

The hot new security update is live, and you maybe want some root love without flashing custom kernel.
(Stock Image here : https://developers.google.com/android/nexus/images#volantis)
Handy modified root compatible boot image for the latest stock image MRA58N. Pure stock kernel modified from the stock images.
You have two choices:
The traditional root in system, which breaks OTA functionality.
(It's more stable now)
New "systemless" approach, which means the root stuffs are only in DATA and BOOT, the system will stay intact and it will accept OTAs.
(Note that this method is still in beta stage according to CF)
Instructions:
System:
Unzip system-root.zip, flash the boot.img through fastboot
Flash SuperSU 2.52
Systemless:
Be sure you haven't used any other root method(like the one above), if you've rooted with other methods, please re-flash your system back to pure stock
Unzip systemless-root.zip, flash the boot.img through fastboot
Download SuperSU-v2.56-20151030013730.zip in this thread, and flash it through TWRP
Important!! Please choose "Do not install SuperSU" when reboot in TWRP if appears.

When a new OTA appears I can just apply it and it will work? Do I keep root or do I have to reroot it again?

Are the attached zip files for the wifi model only?

I have this Kernel:
3.10.40-g909db78
[email protected] #1
Fri Aug 28 21:16:30 UTC 2015
Is this a stock one?
And with method shall I use to get rooted MRA58N?

Jeltel said:
When a new OTA appears I can just apply it and it will work? Do I keep root or do I have to reroot it again?
Click to expand...
Click to collapse
You can revert to stock boot and stock recovery to apply OTA
corkiejp said:
Are the attached zip files for the wifi model only?
Click to expand...
Click to collapse
Yes, I can make a LTE compatible version though.
sejmand said:
I have this Kernel:
3.10.40-g909db78
[email protected] #1
Fri Aug 28 21:16:30 UTC 2015
Is this a stock one?
And with method shall I use to get rooted MRA58N?
Click to expand...
Click to collapse
Yes, and yes

topjohnwu said:
You can revert to stock boot and stock recovery to apply OTA
Yes, I can make a LTE compatible version though.
Yes, and yes
Click to expand...
Click to collapse
A LTE compatible version would be great!!!

topjohnwu said:
You can revert to stock boot and stock recovery to apply OTA
Click to expand...
Click to collapse
So that's a no

I flashed factory image MRA58N (system gets encrypted, because it wasn't under MRA58K)
then twrp
then systemless-root (boot.img)
then superuser 2.56.....
EVERYTHING WORKS FINE:
encrypted with root!

how to flash boot.img (command for flashing)
topjohnwu said:
The hot new security update is live, and you maybe want some root love without flashing custom kernel.
(Stock Image here : https://developers.google.com/android/nexus/images#volantis)
Handy modified root compatible boot image for the latest stock image MRA58N. Pure stock kernel modified from the stock images.
You have two choices:
The traditional root in system, which breaks OTA functionality.
(It's more stable now)
New "systemless" approach, which means the root stuffs are only in DATA and BOOT, the system will stay intact and it will accept OTAs.
(Note that this method is still in beta stage according to CF)
Instructions:
System:
Unzip system-root.zip, flash the boot.img through fastboot
Flash SuperSU 2.52
Systemless:
Be sure you haven't used any other root method(like the one above), if you've rooted with other methods, please re-flash your system back to pure stock
Unzip systemless-root.zip, flash the boot.img through fastboot
Download SuperSU-v2.56-20151030013730.zip in this thread, and flash it through TWRP
Important!! Please choose "Do not install SuperSU" when reboot in TWRP if appears.
Click to expand...
Click to collapse
how to flash boot.img for system less (partition ?)

Lightnyboy said:
how to flash boot.img for system less (partition ?)
Click to expand...
Click to collapse
Unzip systemless-root.zip which will give you a "boot.img" file.
Then while in fastboot
"fastboot flash boot boot.img"
Anyone have the boot files for LTE yet?

Nice. Could you add the link to CF original post in systemless root.

thebrainkafka said:
Nice. Could you add the link to CF original post in systemless root.
Click to expand...
Click to collapse
topjohnwu said:
[*]Download SuperSU-v2.56-20151030013730.zip in this thread, and flash it through TWRP
[*]Important!! Please choose "Do not install SuperSU" when reboot in TWRP if appears.
Click to expand...
Click to collapse
Already linked? Click on "this thread" above!

Updated for LTE... Sorry for the late update.

Also looks like rovo89 just put up xposed for marshmallow in his xposed for lollipop thread. Yes!
xposed marshmallow

topjohnwu said:
Updated for LTE... Sorry for the late update.
Click to expand...
Click to collapse
Thanks for the modified boot images for LTE, I linked back here from my thread in Q&A forum.

have problems getting it to work...
am on MRA58N stock.
My exact steps.
adb reboot bootloader
Device reboots to bootloader.
fastboot flash boot boot.img (extracted from volantisg-mra58n-boot-systemless.zip)
fastboot boot twrp.img (extracted from https://dl.twrp.me/flounder/twrp-2.8.7.1-flounder.img)
From here, I manage to get into TWRP but they are asking for a PIN. I had to cancel and mounted an external USB storage and manage to flash SuperSU-v2.56-20151030013730.zip successfully. Rebooting after and not installing the the SuperSU that TWRP prompts.
After rebooting, I still don't have root. What did I do wrong?

madbat99 said:
Also looks like rovo89 just put up xposed for marshmallow in his xposed for lollipop thread. Yes!
xposed marshmallow
Click to expand...
Click to collapse
I haven't run N version yet as my N9 is finally working without lags/reboots. But, the lure of the close all recent apps button (and very successful experience with xposed/gravity box on N5 after a year) in GB was too great. It works beautifully!
This may seem off-topic, but since root is required, maybe readers can allow exception.
Sent from my Nexus 9 using Tapatalk

chesterchen said:
have problems getting it to work...
am on MRA58N stock.
My exact steps.
adb reboot bootloader
Device reboots to bootloader.
fastboot flash boot boot.img (extracted from volantisg-mra58n-boot-systemless.zip)
fastboot boot twrp.img (extracted from https://dl.twrp.me/flounder/twrp-2.8.7.1-flounder.img)
From here, I manage to get into TWRP but they are asking for a PIN. I had to cancel and mounted an external USB storage and manage to flash SuperSU-v2.56-20151030013730.zip successfully. Rebooting after and not installing the the SuperSU that TWRP prompts.
After rebooting, I still don't have root. What did I do wrong?
Click to expand...
Click to collapse
You don't need to extract twrp.img, you should flash the full image "twrp-2.8.7.1-flounder.img".
That version should not ask for PIN anymore.
Note: system-less is still experimental

If I want to switch from the systemless root to regular system modified root, are there specific cleanup actions to take?
Thanks!

maximumentropy said:
If I want to switch from the systemless root to regular system modified root, are there specific cleanup actions to take?
Thanks!
Click to expand...
Click to collapse
Reflash the stock image then you're good

Couldn't update Installation problem with august update

So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash

Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.

emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542

sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash

emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.

ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash

sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?

emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).

sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?

emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.

sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument

Which TWRP did you use?

sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..

ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.

Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?

Storage mounting issues after flashing TWRP

Just unlocked and flashed TWRP. No matter what I try, I can't get it to recognise my storage to install SuperSU.
What can I do to fix this?
I am on stock OOS 5.1.5
Thanks
EDIT - Worked it out. I formatted the data and it then let me install SuperSU.
EDIT 2 - After installing SuperSU zip file, the phone wasn't rooted when rebooting and also, TWRP won't recognise my data once I rebooted into it again.
Any ideas?

gman88667733 said:
Just unlocked and flashed TWRP. No matter what I try, I can't get it to recognise my storage to install SuperSU.
What can I do to fix this?
I am on stock OOS 5.1.5
Thanks
EDIT - Worked it out. I formatted the data and it then let me install SuperSU.
EDIT 2 - After installing SuperSU zip file, the phone wasn't rooted when rebooting and also, TWRP won't recognise my data once I rebooted into it again.
Any ideas?
Click to expand...
Click to collapse
After twrp installation and before the first system reboot you need to flash magisk so twrp will be stick in place.
I really don't know if it works with supersu. Do you want to stay encrypted(internal storage)? Which twrp(file name) did you flash?

Preferably encrypted. I flashed twrp 3.1.1 cheeseburger.
I am trying to install Franco Kernel. So I unlocked the bootloader, flashed TWRP 3.1.1 and then tried to flash Super SU or Magisk and neither worked. It came up with an issue with file mounting.

gman88667733 said:
Preferably encrypted. I flashed twrp 3.1.1 cheeseburger.
I am trying to install Franco Kernel. So I unlocked the bootloader, flashed TWRP 3.1.1 and then tried to flash Super SU or Magisk and neither worked. It came up with an issue with file mounting.
Click to expand...
Click to collapse
It seems to me you did not use latest blu spark or codeworkx recovery instead you used official twrp.
It's recommended to not use official twrp. Please change the twrp and test again.

strongst said:
It seems to me you did not use latest blu spark or codeworkx recovery instead you used official twrp.
It's recommended to not use official twrp. Please change the twrp and test again.
Click to expand...
Click to collapse
You are correct. I did not use the blu spark TWRP.
Can I use TWRP 3.1.1 BLU spark version, or shall I use 3.2.1 blu spark?
Thanks.

gman88667733 said:
You are correct. I did not use the blu spark TWRP.
Can I use TWRP 3.1.1 BLU spark version, or shall I use 3.2.1 blu spark?
Thanks.
Click to expand...
Click to collapse
Just use latest blu spark twrp with treble in file name from here https://forum.xda-developers.com/oneplus-5/development/kernel-t3651933

strongst said:
Just use latest blu spark twrp with treble in file name from here https://forum.xda-developers.com/oneplus-5/development/kernel-t3651933
Click to expand...
Click to collapse
All done! I now have another issue. I originally tried to flash Super SU and it did not work. I have tried to flash Magisk today after flashing franco kernel and get an error says that there is an unsupported boot image program or something.
I am on stock OOS, with franco kernel and no root. How can I get it so that I am on stock OOS with franco kernel and Magisk?
Thanks.

gman88667733 said:
All done! I now have another issue. I originally tried to flash Super SU and it did not work. I have tried to flash Magisk today after flashing franco kernel and get an error says that there is an unsupported boot image program or something.
I am on stock OOS, with franco kernel and no root. How can I get it so that I am on stock OOS with franco kernel and Magisk?
Thanks.
Click to expand...
Click to collapse
Did you uninstall supersu according to instructions or just dirty flashed magisk(bad idea)?

strongst said:
Did you uninstall supersu according to instructions or just dirty flashed magisk(bad idea)?
Click to expand...
Click to collapse
I attempted to dirty flash Magisk (however it did not install)
So what do I need to do to uninstall SuperSU?
The main issue is, after installing supersu, my phone still wasn't rooted!

gman88667733 said:
I attempted to dirty flash Magisk (however it did not install)
So what do I need to do to uninstall SuperSU?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459

strongst said:
https://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459
Click to expand...
Click to collapse
Thanks. Will I need to flash a stock boot.img too? If so, where would I find this given I am on stock OOS.

gman88667733 said:
Thanks. Will I need to flash a stock boot.img too? If so, where would I find this given I am on stock OOS.
Click to expand...
Click to collapse
Normally not, but if needed: every rom zip comes along with a boot.img inside the zip. Just extract it from this rom zip and you have the kernel of this rom :good:

strongst said:
Normally not, but if needed: every rom zip comes along with a boot.img inside the zip. Just extract it from this rom zip and you have the kernel of this rom :good:
Click to expand...
Click to collapse
How do I get the ROM zip for OOS stock?

strongst said:
Normally not, but if needed: every rom zip comes along with a boot.img inside the zip. Just extract it from this rom zip and you have the kernel of this rom :good:
Click to expand...
Click to collapse
Interestingly, I just flashed the unSU zip, wiped cache and then tried Magisk. It says I need to flash a stock boot.img
What is the process of doing this?
Thanks

gman88667733 said:
Interestingly, I just flashed the unSU zip, wiped cache and then tried Magisk. It says I need to flash a stock boot.img
What is the process of doing this?
Thanks
Click to expand...
Click to collapse
Flash the boot.img through twrp

strongst said:
Flash the boot.img through twrp
Click to expand...
Click to collapse
Do I need to wipe or anything? Or do I just flash the boot.img, wipe cache and then flash Magisk? Or shall I boot fully into the OS, then back into TWRP to flash it?
Still not sure where I get the correct boot.img from!
Edit - can I dirty flash the whole firmware? I would like to do this so I can do a clean backup with the stock kernel before I then flash Magisk and Franco. Would this work?

gman88667733 said:
Do I need to wipe or anything? Or do I just flash the boot.img, wipe cache and then flash Magisk? Or shall I boot fully into the OS, then back into TWRP to flash it?
Still not sure where I get the correct boot.img from!
Edit - can I dirty flash the whole firmware? I would like to do this so I can do a clean backup with the stock kernel before I then flash Magisk and Franco. Would this work?
Click to expand...
Click to collapse
You can also flash the complete rom with kernel.
But just look inside the downloaded rom zip file, there's the boot.img you're looking for. You don't need to wipe anything or boot into OS for flashing just the kernel!

strongst said:
You can also flash the complete rom with kernel.
But just look inside the downloaded rom zip file, there's the boot.img you're looking for. You don't need to wipe anything or boot into OS for flashing just the kernel!
Click to expand...
Click to collapse
Thanks for that, all up and running now.
Do you know where I can find the Franco governor profiles? I've had a good look around but can't find them again!
Thanks

gman88667733 said:
Thanks for that, all up and running now.
Do you know where I can find the Franco governor profiles? I've had a good look around but can't find them again!
Thanks
Click to expand...
Click to collapse
The profiles are inside the app manager imo https://forum.xda-developers.com/on...francokernel-r1-8th-aug-t3653500/post73328473

strongst said:
The profiles are inside the app manager imo https://forum.xda-developers.com/on...francokernel-r1-8th-aug-t3653500/post73328473
Click to expand...
Click to collapse
I have the app manager. However there is only 'Ravi' profile under the governor profile options.

Rooted 6T / Update to 10.3.2 with TWRP completed successful / 6T stays at 10.3.1

Hi there
It's very strange. My phone is rooted and normally the update to a new version of OxygenOS works without problems. This time (update to 10.3.2) it's different. I use the following process:
Install full OTA version with TWRP
Install TWRP
Reboot
Install Magisk
After rebooting my 6T it shows immediately that there is a system update to version 10.3.2 available. The version I installed seconds ago. I tried full OTA version from several sources including the one from Oneplus itself. Always the same phenomenon.
Any idea what causes this behavior and how to solve it?

nobody has an idea?

e.m.m.a said:
nobody has an idea?
Click to expand...
Click to collapse
Hello, it seems somehow won't flash...
I would racommend to use LOCAL UPDATE to update your rom.
See THIS THREAD, post #3, very useful thread.
Would to thank @Striatum_bdr and @Scott for their awesome work..
Cheers

Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk

DowneyHere said:
Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
Quick question:
How do I update when i'm on a patche OOS?
I only have Magisk. No TWRP
Hope you or someone can help me out
JP

Johan.constantin said:
Quick question:
How do I update when i'm on a patche OOS?
I only have Magisk. No TWRP
Hope you or someone can help me out
JP
Click to expand...
Click to collapse
Hey dude,
look at the link i posted above,
it explain exactly what you're looking for.
If you have any further doubts you just have to ask...
Cheers

DowneyHere said:
Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
Thank you. I will first try this method. does it make a difference if I use the TWRP zip or image to install it? Previously I used img.
And before rebooting system I would install magisk. but that should not affect the uodate, rught?

e.m.m.a said:
Thank you. I will first try this method. does it make a difference if I use the TWRP zip or image to install it? Previously I used img.
And before rebooting system I would install magisk. but that should not affect the uodate, rught?
Click to expand...
Click to collapse
Are you on 10.3.1?
Sent from my OP6T using Tapatalk

DowneyHere said:
Are you on 10.3.1?
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
yes

worked. thank you for your help.