my phone is dead plz help me - GiONEE Elife E7

Dear experts :
i install Miui v7 using twrp and after that try flash the phone using Qcom download tool with 4.4.2 kitkat stock rom after that the phone dead and not able to flash againe , in Qcom tool when i start download he arrive to 3% and stop writing (flash programer file fail) and i use this rom (Gionee_E7_32G_0301_T8180_(by_xdafirmware.com)) and i follow all of steps and install the usb driver but still this wrong , i dont know where are the wrong i hope from u or any one help me

amr shawkey said:
Dear experts :
i install Miui v7 using twrp and after that try flash the phone using Qcom download tool with 4.4.2 kitkat stock rom after that the phone dead and not able to flash againe , in Qcom tool when i start download he arrive to 3% and stop writing (flash programer file fail) and i use this rom (Gionee_E7_32G_0301_T8180_(by_xdafirmware.com)) and i follow all of steps and install the usb driver but still this wrong , i dont know where are the wrong i hope from u or any one help me
Click to expand...
Click to collapse
http://forum.xda-developers.com/elife-e7/general/guide-unbrick-hardbricked-gionee-elife-t3254532 :good:

Related

How to restore back to stock kernel in galaxy y ? :( please help :( ?

i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
You have to select Modem and CSC files too I guess
avinash9441 said:
You have to select Modem and CSC files too I guess
Click to expand...
Click to collapse
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help
you sure you picked all 3 files? shud be ok by then .
Sent from my GT-S5360 using xda app-developers app
chotu222 said:
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help
Click to expand...
Click to collapse
Download and flash through odin DDLC2_ODDLA2_DDLC2 or DDLE1_DDLD1_DDLE1. Even I had problem with DDLA3_DDLA2_DDLA2.
Hope it works now.
hmmm
Im really confused, because if you flashed merruk kernel and it did not work then just download recovery kernel..
put phone in download mode (power+home+volume down)
plug phone to pc while odin is open
choose recovery kernel on PDA option (don't check or uncheck anything)
flash it and it should work... lol
Stock : http://www.mediafire.com/?dzfcrhb8fj3s40x
Terma Kernel ; http://www.mediafire.com/?81d1acx1c19m9k5
Test Kernel ; http://www.mediafire.com/?0j6guwgg60opj7y
-----------------------------
iplaygalaxyy for android
chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
It was happened to me before.. I have no choice but to flash to a fresh STOCK ROM with stock Kernel.
The SOLUTION would be ODIN. Go to Doky's thread and select the latest version of your firmware based on your country - download and extract.
Here's his thread : http://forum.xda-developers.com/showthread.php?t=1465800
Now, download ODIN if you're not having it yet. here's the thread - credits to OP : http://forum.xda-developers.com/showthread.php?t=1464775
Here's the instruction on how to flash to STOCK ROM and Kernel. http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
I did formatted my sd card extent that time too hope it helps.
anyone can help
Restore to Stock Kernel
Download the stock kernel ...
In Odin choose PDA and select the kernel
Flash it in Download Mode....
guys
i can only give you my solution....i was on hells kernel #50 and i wanted to revert to stock.....
i tried DOKY73 sirs stock roms but they didnt work.
thus, my and my friend YASH 98 modded it and now it works perfectly....
simply use these instead of the stock on DOKY73s thread.
http://d-h.st/tjd
[ Tested ] [ worked when sir dokys failed ]
how to remove meruuk kernel from g s5360[[[[[[samsung glaxy y]]]]]]]]
my build is GINGERBREAD.DDLF2
BASEBAND version isS5360DDLF1
KERNEL IS 2.6.35.7 Merruk [email protected]
I want to revert back to my stock kernel.please tell me how to do this.
I can't update my phone because of it.
Flash stock rom via odin. U can get all the requirements at sir doky73's thread.
What u need :
1. Odin
2. Your own country's firmware and totoro_0623.pit ( find it on the web. )
3. Usb drivers
4. A pc
5. Samsung usb cable
Extract the zip file u downloaded of your country's firmware. Open the odin.exe on your pc (windows ), then pit option choose totoro.pit, boot option choose boot, phone choose modem file, pda choose pda.
Finished press volume down + home button + power button to download mode on samsung galaxy y. Then screen turns on press volume up again. Connect the usb cable to your phone to pc.
Then odin recognises your phone and shows a yellow thing on the top. Then press start and wait for it to boot up !
Remember to press thanks ya !
Sent from my GT-S5360 using xda app-developers app
That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.
A_Reloaded said:
That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.
Click to expand...
Click to collapse
from where can i get a flashable zip of stock kernel??????
Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip
[Bruce Wayne] said:
Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip
Click to expand...
Click to collapse
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:
YES He is right this is a good method of flashing the stock kernel instead of flashing the whole firmware again.
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3
apoorva.97 said:
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:
Click to expand...
Click to collapse
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.
[Bruce Wayne] said:
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.
Click to expand...
Click to collapse
i dont know what is download mode. i cant go in recovery mode too. its my fisrtt mobile.only passed 3 months with it . o god i am crying:crying::crying::crying::crying::crying::crying:
Ok.
Here is what you need to do.
Download a stock rom from dock73's thread from dev section (its a sticky one, so no trouble in finding it).
Then download odin3 v1.85 from same thread.
Get samsung mobile device drivers.
Install drivers first.
Then extract all those zips (rom and odin ) in a separate folder.
Open odin.exe.
Then switch off your phone (pull battery if nothing works).
Press Volume down + Power + Home Buttons All at same time
You will be I'm download mode.
Press volume up and connect your phone to pc with data cable.
You will see a yellow signal on odin screen. Dont change anything and just add those files from the firmwares you extracted in the folder.
Csc.tar.md5 for csc
Modem.tar.md5 for phone
And
pda.tar.md5 for pda
Click on start and it will show a pass to you when completed.
Hope that complets all for you.
If you still dont get head over to docky thread.
And see 2nd post.

[Q] can anyone take me out of this error please? :( lg g2 f320L

hi all , i was on stock , i installed cwm recovery and installed a custom rom whch wasnt good , i wanna to go back to stock but when i open lg support tool n flash tool and select kdz file and sofware update starts so i get this error , i format my phone , re installed windows but same problem , is it because i dint remove cwm recovery or what? i still ve cwm recovery n i dno hw to remove it , someone please help , thnx
pw1nce said:
hi all , i was on stock , i installed cwm recovery and installed a custom rom whch wasnt good , i wanna to go back to stock but when i open lg support tool n flash tool and select kdz file and sofware update starts so i get this error , i format my phone , re installed windows but same problem , is it because i dint remove cwm recovery or what? i still ve cwm recovery n i dno hw to remove it , someone please help , thnx
Click to expand...
Click to collapse
Did you flashed a rom for F320L only? What rom u flashed? Install windows xp then try reflashing?
marshygeek said:
Did you flashed a rom for F320L only? What rom u flashed? Install windows xp then try reflashing?
Click to expand...
Click to collapse
i flashed the hk v1 rom at first , then i flashed vdt-v5 and now currently using that one , and now im trying to go back stock but cant , you can see the error , i installed xp last night , downloaded all the drivers , but i was gettin some error like ''LGE ANDRIOID NET MTP DRIVER'' is not installed and it caused me the issue , i seached allot about it and installed some mtp drivers but the same problem so i came back to windows 7 , but rememer i flashed stock firmware thruough windows 7 before too , it worked and at that time i never used custom roms and cwm recovery but after flashing custom roms and installing recovery im having this issues..

[Q] [HELP] How to Flash 4.4.2 stock rom in Write Protection: Enable

i Follow the procedure given by sammobile perfectly but no result ...
it stuck in odin mode write protect : enable ...
some people said to release the firewall and antivirus ... (done that) nothing work ....
i've try use philz recovery to flash it but it won flash
i think i really need urge way to flash it to 4.4.2 kitkat rom ...
plllz help n guide me ..
playmoonbase said:
i Follow the procedure given by sammobile perfectly but no result ...
it stuck in odin mode write protect : enable ...
some people said to release the firewall and antivirus ... (done that) nothing work ....
i've try use philz recovery to flash it but it won flash
i think i really need urge way to flash it to 4.4.2 kitkat rom ...
plllz help n guide me ..
Click to expand...
Click to collapse
flash with latest firmware here is the link :http://forum.xda-developers.com/galaxy-grand-2/general/stock-firmware-grand-2-google-drive-t2849501
Usb Cable And Port
U mean u r stuck in odin Procedure !
Check if u have the right firmware
Check if u have the right version of Odin
Mainly check if the usb cable and usb port is working properly !

[Q] CWM flashable Stock ROM and CWM backup Stock ROM

Please Help...
I need CWM Backup of stock ROM or CWM Flashable Stock ROM..
Because i cant Flash my phone using Odin, Already download 5 Firmware from Sammobile, Failed on NON-HLOS.bin
On Kies it say my phone no recognise by Kies..
Phone already rooted and use Philz Touch Recovery, Phone system from another Prime Phone, but Cannot Turn On Wifi and Erorr to open Camera..
Baseband Version G530HXCU1AOA2
If there have another way to fix it please tell me..
Thanks before..
Sorry for my bad English, hoping you can understand what i mean..
From : Indonesia
romisatria said:
Please Help...
I need CWM Backup of stock ROM or CWM Flashable Stock ROM..
Because i cant Flash my phone using Odin, Already download 5 Firmware from Sammobile, Failed on NON-HLOS.bin
On Kies it say my phone no recognise by Kies..
Phone already rooted and use Philz Touch Recovery, Phone system from another Prime Phone, but Cannot Turn On Wifi and Erorr to open Camera..
Baseband Version G530HXCU1AOA2
If there have another way to fix it please tell me..
Thanks before..
Sorry for my bad English, hoping you can understand what i mean..
From : Indonesia
Click to expand...
Click to collapse
remove your battery and look at the label
if U see 530H-DV u got to download HXCU...ROMs
If U see 530H-DS U got to download HXX... ROMs
Try them
If you didnt get the result
DO THIS WITH YOUR RISK:
in odin Odin3_v3.10.6 JUST check:
Auto reboot
F. reset Time
Full nand Erase
ATTENTION DO IT WITH YOUR RISK I DID IT ONCE WHEN I FACED WITH THE SAME ERROR and it was ok but doesn't mean it works for you
adblocker said:
remove your battery and look at the label
if U see 530H-DV u got to download HXCU...ROMs
If U see 530H-DS U got to download HXX... ROMs
Try them
If you didnt get the result
DO THIS WITH YOUR RISK:
in odin Odin3_v3.10.6 JUST check:
Auto reboot
F. reset Time
Full nand Erase
ATTENTION DO IT WITH YOUR RISK I DID IT ONCE WHEN I FACED WITH THE SAME ERROR and it was ok but doesn't mean it works for you
Click to expand...
Click to collapse
Thanks Sir, Now Downloading HXX version.. I will try to flash again.. Hoping it work for me to...
Edit : Finaly sucses flash Grand prime ..
Just Forgot to check Full nand erase on Odin when odin fail before, i am using Emirate Firmware and work like a charm...
Thanks for helping sir..
romisatria said:
Thanks Sir, Now Downloading HXX version.. I will try to flash again.. Hoping it work for me to...
Edit : Finaly sucses flash Grand prime ..
Just Forgot to check Full nand erase on Odin when odin fail before, i am using Emirate Firmware and work like a charm...
Thanks for helping sir..
Click to expand...
Click to collapse
Any time my friend

Phone is not booting but getting connected to pc . Plzzz help anyone ??

Pllzzz help . My device is getting connected to pc but is not booting up . I was on wiko base on the Indonesian lp rom and tried to flash this using sp flash tools -- http://forum.xda-developers.com/show....php?t=2777619 . It was stock jb 4.2.2 sp flashable . What should i do now ? Adb is not recognising my device . Plzzz help
try this
ffun735 said:
Pllzzz help . My device is getting connected to pc but is not booting up . I was on wiko base on the Indonesian lp rom and tried to flash this using sp flash tools -- http://forum.xda-developers.com/show....php?t=2777619 . It was stock jb 4.2.2 sp flashable . What should i do now ? Adb is not recognising my device . Plzzz help
Click to expand...
Click to collapse
hi plz make sure you have installed all the necessary drivers and then download the stock rom open sptool select shatter file from that folder and hit download now connect your device without battery it will detect your phone and give your phone life then you are ready to do anything you want ...
it worked for me hope it will work for you too
vipinm said:
hi plz make sure you have installed all the necessary drivers and then download the stock rom open sptool select shatter file from that folder and hit download now connect your device without battery it will detect your phone and give your phone life then you are ready to do anything you want ...
it worked for me hope it will work for you too
Click to expand...
Click to collapse
Earlier , i tried a lot of times to boot it up but it didnt . Then i tried flashing the wiko lp stock rom and after several attempts , it booted up . I dont want to take any risk now . Thnx for ur reply !! )
ffun735 said:
Earlier , i tried a lot of times to boot it up but it didnt . Then i tried flashing the wiko lp stock rom and after several attempts , it booted up . I dont want to take any risk now . Thnx for ur reply !! )
Click to expand...
Click to collapse
that's gr8
you can try bliss pop v 3.75
it's really good no bug so far
i am using it it's flashable zip you can give it a try but you must use pilz v6 cwm recovery.
have gr8 time

Categories

Resources