getting Gapps on T355c - Galaxy Tab 4 Q&A, Help & Troubleshooting

ended up with a china T355c tab
managed to Root it with Kingoroot but can't get gapps on it
is there any script for installation via ADB?
tried to use flashfire but can't get to work with kingo root app
tried to install SuperSu but won't work

Related

Cant access root without kingroot. Need superSu

What is this Whenever I uninstall kingroot I lose my root access.. I rooted my phone from CF Autoroot, means I should have SuperSu installed but whenever I tried to update binary it used to show disable knox and I did it, I completly uninstalled Knox and now whenever I try to update su binary it says installation failed. Reboot and try again.. I tried sever times but same issue Even I googled and followed dufferent method but su-binary didnt updated and I am forced to stay in kingroot :/
I lije king root
Have you tried flashing supersu.zip in recovery?
Yes, sir I tried from TWRP
It says: There is no SU binary installed, and super SU cannot install it. There is a problem. .
GDReaper said:
Have you tried flashing supersu.zip in recovery?
Click to expand...
Click to collapse
Help sir
Athakuri700 said:
Help sir
Click to expand...
Click to collapse
I think the problem is kingroot. It may prevent other superuser apps from installing properly.
If you want supersu, start from 0 (reflash stock) and root it with cf-auto-root first.
Isnt there any alternative way????
KingRoot is only useful if other methods of rooting are either unavailable or not working anymore. If you have a GT-I9505, you can do some trick to root your phone with Towelroot by downgrading kernel using the KitKat one and reflash using the stock Lollipop one right away after rooting.
My suggestion to reflash stock first (like @GDReaper said), and try Towelroot or CF Auto-Root method.
Sent from my GT-I9500
I think another way to root would be to flash TWRP and install supersu from TWRP.
I didn't like KingRoot, and found it very invasive. After it is installed, it continues to slam remote servers for no apparent reason.
KingoRoot seemed 1000 times better and their SuperUser app seems fine. However, the only way I could get SuperSU installed, was to freeze KingoUser/SuperUser and then install SuperSU, then install to system. Reboot and done. I just had to keep Kingo's SuperUser frozen to avoid any problems.
Hopefully this helps.
audit13 said:
I think another way to root would be to flash TWRP and install supersu from TWRP.
Click to expand...
Click to collapse
Audit As I earlier said.. It says: There is no SU binary installed, and super SU cannot install it. There is a problem. I flashed through TWRP
krasCGQ said:
KingRoot is only useful if other methods of rooting are either unavailable or not working anymore. If you have a GT-I9505, you can do some trick to root your phone with Towelroot by downgrading kernel using the KitKat one and reflash using the stock Lollipop one right away after rooting.
My suggestion to reflash stock first (like @GDReaper said), and try Towelroot or CF Auto-Root method.
Sent from my GT-I9500
Click to expand...
Click to collapse
Brother.. I am in Kitkat only. And I used CF Autoroot to root my device
Did you try removing all traces of previous supersu installations before flashing via TWRP? Which version of supersu was flashed through recovery? The phone has the latest releast of TWRP?
@Athakuri700,
Your phone model?
Sent from my GT-I9500
Its s4 gt-I9505 kitkat 4.4.2 baseband XXUGNH6.. yes the TWRP is of latest one as I flashed from TWRP Manager app..
Not sure if it makes difference but try reflashing twrp using odin, then flash supersu.

Help me get rid of Kingroot

I have rooted my L8lite using Kingroot and it was successful (I think), but now I can't get rid of Kingroot if my life depended on it.
Things I have tried so far:
- Replacing Kingroot with SuperSU using the method described here: http://forum.xda-developers.com/p8lite/general/tutorial-how-to-root-bootloader-unlock-t3314786
- Replacing Kingroot with SuperSU using SuperSU-Me application from here: https://androidmtk.com/replace-kinguser-with-supersu
- Removing Kingroot using the option of SuperSU to remove other SU apps
- Uninstalling from Kingroot options menu
- Restoring a backup previously made using adb
- Factory reset
None of this worked. Please for the love of god someone tell me how to remove that piece of malware from my phone. I am frustrated beyond measure and extreme close to completely giving up.
Is my only option flashing? Would that help with removing Kingroot?
Thank you.
Update: I upgraded to Android 6.0 from local storage using an update I downloaded from Huawei's official website (http://forum.xda-developers.com/p8lite/general/rom-emui-4-0-android-6-0-single-sim-ale-t3360097). Kingroot is no longer there and Root checker app says the phone is no longer rooted. Curiously, SuperSU and SuperSU-Me are still there, but I removed them using app manager without hassle. Am I in the clear now?
Update 2: After rebooting using "adb reboot bootloader" command it seems that bootloader is still unlocked, which is good. Now I have to find a better way to unroot.
Getting rid of kingroot
Hey bujamin,
Kingroot is a powerful app and removing it without losing root is a near impossible task.
However, I have a solution, not a programmed flashable zip or something but just a way to get rid of Kingroot using existing tools.
My solution :
1. Use kingroot to root your device.
2. Get a custom recovery after you acquired root with KingRoot, preferably TWRP (bear with KingUser).
3. Open Kingroot and in Settings you will find an option to Remove Root authorisation or Uninstall kingroot (depending on the version). This will remove Kingroot completely and unroot your phone too.
4. Since, you have a custom recovery installed now, you no longer need Kingroot to acquire root access.
5. Get the latest SuperSu flashable zip from here.
6. Access the recovery and install the SuperSu zip that you downloaded.
7. A Success message and an option to reboot system will be shown.
8. Reboot.
SuperSu has now been installed and can be found in your app drawer. Your phone is now rooted.
Read my full thread (with detailed explanation) here and leave comments for further clarifications.

Root p8 lite 6.0 marshmallow

This method is very dangerous.
You need to know the installation of Rom Huawei
from SRKToolHuawei or Huawei unlock bootloader
Even if the device crashes, you can restore it.
See this previous topic
https://forum.xda-developers.com/p8lite/help/phone-p8-lite-t3586427
Prefer to backup by recovery twrp.
Install root p8 lite
https://www.youtube.com/watch?v=XeYiUMcfzek
download BETA-SuperSU-v2.62-66 with kingroot and recovery (Huawei-twrp)
https://up.top4top.net/downloadf-467rcvoy1-zip.html
Why should I install root kingroot after root supersu ?
Because root kingroot he stays after format your phone.
How to delete root supersu and root kingroot?
You Can delete root supersu and kingroot from
Kingoroot for (pc).
If you delete your root by kingoroot(pc) you can install any root and it will work immediately even after formation your phone
-(You do not need the first way to install root )-.
Like root king-oroot or SuperSU from market play.
https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en
and Superuser or any app from market play he's working immediately.
https://play.google.com/store/apps/details?id=com.koushikdutta.superuser&hl=en
twrp
https://twrp.me/Devices/
Search here if you can not find recovery your phone
http://rootjunkysdl.com
kingroot
https://kingroot.net
kingoroot
https://www.kingoapp.com/
If you have android 5.0.1 you do not need all this just need king-o root (pc) when installed it will work immediately.

Problem rooting my S5 phone

I am trying to root my S5 G900F phone by flashing through odin, but the SuperSU keep says that su binary was not installed. I have tried to use other rooting method like KingRoot and one click root bus was unsuccessful. I have tried to manually installed su binary through flashing in twrp but also fails. I have been seeking the solution in the web but it seems that all of the solution for the su binary not installed problem does not work for me. Is there another way to root the phone? Thanks.
Is the oem unlock in the developer options on?
The method used here is outdated (CF auto root). The current method is to first flash TWRP in ODIN, then immediately flash the SuperSU zip in TWRP.
The alternative way is to use magisk for hiding root.

SM-G5520 Nougat Not Flashing GApps with Flashfire after rooting with magisk, Help me

I Have SM-G5520 Nougat, I rooted it successfully here
Link: https://forum.xda-developers.com/sa...g5520-g5520zcu1brb1-nougat-root-twrp-t3772104
But, as mentioned there, I run Flashfire, Grant root access, Browse for GApps.zip and flash it, but after click on flash screen goes black and didn't show any proccess of flashing GApps.
After waiting 2 - 4 Hours, There was still a black screen like my phone is off and I restart my phone. Now there is not a single GApp installed there. Please help me to flash GApps.
I continue my research on rooting and flashing and i got some points that are below,
1. Magisk is system-less root that's why when ever i tried any app to modify system folder or root directory my phone got restart.
2. I tried SuperSU system-less but the device isn't going to root.
3. I tried King Root, Kingoapp, OneClickRoot, Dr. Phone root, iRoot and much more with and without PC but my device was not going to root but only Magisk root my device.
4. I tried CFAuto Root with all modifications but due to my phone didn't have "OEM Unlock" option, flashing CF Root cause failure.
5. I tried to push GApps into Original Firmware, but that way takes a lot time and i failed there because of security reasons (And that was my first attempt to modify "Firmware" I must failed ).
All the conclusion of my work let me know that i have to root my SM-G5520 Nougat as system root that will going to work 100% to flash GApps.
Now Please help me to root system wise and flashing GApps.
Thanks Advance
plz contact Gsm helper team

Categories

Resources