Related
Q&A for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
xolanir said:
So I flashed the latest TWRP 2.8.1.0 using ADB on my 2012 N7 running the official 5.0. Read the OP to see if it was compatible and didn't see anything mentioned about it. It flashed without an issue but upon booting into recovery, I got a dead robot with the red triangle with an exclamation. Does this mean that Android 5.0 isn't supported yet? Thx in advance for the help!
Edit: Reflashed and fixed. 1st flash was probably a bad download. Thx!
Edit 2: flashed recovery.img successfully, but was stuck on boot up for 30mins. Had to reflash device back to stock to fix. Is lollipop not supported yet?
Click to expand...
Click to collapse
same here
this work, thank you so much!
Franz22 said:
this work, thank you so much!
Click to expand...
Click to collapse
Was able to figure it out and make it work. Not sure what it was that didn't let cmd flash the recovery, but when I used the flashing recovery option in NRT, it worked like a charm.
http://forum.xda-developers.com/showthread.php?p=56752535
[RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
[quote name="bombadier" post=56749620]How are you installing the ROM? If you are using the factory images then extract the boot and system images and flash them using fastboot ,if its not booting past......
Sent from my Nexus 7 using Tapatalk
Trying to install last TWRP recovery on dev-unlocked HTC One (M7) via fastboot.
All was ok, but cannot enter into recovery. It shows me "Entering recovery" page with HTC logo and nothing happened.
And when i tried to use .apk into Android it says "TWRP Manager has crashed".
download website seems not working either with app or by website
is there any mirror ?
thanks
Anybody having 2.8.4.1 as a flashable zip?
Install TWRP on Xperia Acro S lt26w
Hi to all. How I can Install TWRP on my Xperia Acro S lt26w. I saw ROMS for my phone with TWRP, but I cant manualy install it becouse my phone model in TWRP Manager (ROOT) from Google Play is not listed.
Sry for bad English.
So i had hurricane v12 working on my n7100 for quite some time and today i decided to flash another rom, ihad twrp 2.7 installed on my N7100, so today i updated to twrp 2.8.6 in hopes of installing another rom, and right after twrp update when i rebooted i noticed i have no signal and that my imei is corrupted, it says it's unknown. i have an old efs.img but cant restore it, tried dr.ketans solution and this one and couldnt restore the imei. do i need to have same rom installed as when i made the efs backup? becaouse im not sure if the backup i have is from when i had hurricane installed, maybe its from 4.2 version of android. Is there any help for my phone?
Leads to bootloop
Moto G XT033 with Lollipop 5.0.2
TWRP was working nice until I make a ROM backup. After finishing the backup (only saved the ROM file. Did not restore) I rebooted the system and BAN! My phone was gone!
Searching a few topics, I found more users with the same problem: uses backup feature and get a bootloop.
Watch your steps, moto G users!
Hey guys, definitely new to this, haven't flashed a rom since I had a HTC Droid Incredible about five years ago. My brother just helped me root my phone and install TWRP, except when we go to look at flashing a new rom it states that you need TWRP 2.8.6.3. We are currently running 2.8.5.1 I found the 39A bootstack which supposedly includes TWRP 2.8.6.3, but I'm lost when it comes to how to flash this bootstack with the updated TWRP. Can anybody provide instructions, or a link to a previous thread? I did try using the search bar, but when you search "how to flash bootstack" the results are overwhelming because almost every post has the word "how," "flash," or "bootstack."
Really appreciate the help!
amcleod1995 said:
Hey guys, definitely new to this, haven't flashed a rom since I had a HTC Droid Incredible about five years ago. My brother just helped me root my phone and install TWRP, except when we go to look at flashing a new rom it states that you need TWRP 2.8.6.3. We are currently running 2.8.5.1 I found the 39A bootstack which supposedly includes TWRP 2.8.6.3, but I'm lost when it comes to how to flash this bootstack with the updated TWRP. Can anybody provide instructions, or a link to a previous thread? I did try using the search bar, but when you search "how to flash bootstack" the results are overwhelming because almost every post has the word "how," "flash," or "bootstack."
Really appreciate the help!
Click to expand...
Click to collapse
Interested in this as well. I've just started with the LG G2 and am at the same point. How do we go about flashing a boot stack? Does, as @amcleod1995 stated, the boot stack include the newer version of TWRP? Can someone provide a step by step tutorial or a video maybe? Thanks in advance! Here are the steps below we took to root and add recovery.
We both have our phones rooted following:
1. Root - http://forum.xda-developers.com/andr...vices-t3049772
2. Recovery ( TWRP) - http://forum.xda-developers.com/veri...-twrp-t3053134
Deathscyth3 said:
Interested in this as well. I've just started with the LG G2 and am at the same point. How do we go about flashing a boot stack? Does, as @amcleod1995 stated, the boot stack include the newer version of TWRP? Can someone provide a step by step tutorial or a video maybe? Thanks in advance! Here are the steps below we took to root and add recovery.
We both have our phones rooted following:
1. Root - http://forum.xda-developers.com/andr...vices-t3049772
2. Recovery ( TWRP) - http://forum.xda-developers.com/veri...-twrp-t3053134
Click to expand...
Click to collapse
amcleod1995 said:
Hey guys, definitely new to this, haven't flashed a rom since I had a HTC Droid Incredible about five years ago. My brother just helped me root my phone and install TWRP, except when we go to look at flashing a new rom it states that you need TWRP 2.8.6.3. We are currently running 2.8.5.1 I found the 39A bootstack which supposedly includes TWRP 2.8.6.3, but I'm lost when it comes to how to flash this bootstack with the updated TWRP. Can anybody provide instructions, or a link to a previous thread? I did try using the search bar, but when you search "how to flash bootstack" the results are overwhelming because almost every post has the word "how," "flash," or "bootstack."
Really appreciate the help!
Click to expand...
Click to collapse
Very simple, update twrp manually from blastagator's website, reboot to recovery , flash bootstack zip, reboot to recovery and the flash anything that requires it (ie: CAF roms) . Now you're on the latest bootstack (bootloader, modem and everything else that comes with it).
I'm in twrp right now (wiped the system)
Choristav said:
Very simple, update twrp manually from blastagator's website, reboot to recovery , flash bootstack zip, reboot to recovery and the flash anything that requires it (ie: CAF roms) . Now you're on the latest bootstack (bootloader, modem and everything else that comes with it).
Click to expand...
Click to collapse
can I install blastgator bumped recovery from within current TWRP recovery (I've 2.6.3.3) ? and the install blasgator bumped bootstack - I want cm 12.1 so the 3rd link from here http://blastagator.ddns.net/bootloader.php
roberto32 said:
can I install blastgator bumped recovery from within current TWRP recovery (I've 2.6.3.3) ? and the install blasgator bumped bootstack - I want cm 12.1 so the 3rd link from here http://blastagator.ddns.net/bootloader.php
Click to expand...
Click to collapse
Sure can.
Hello everyone, I bought a week the OnePlus 2 from the official website, I would like to install the CM13, I tried in every way to flash the recovery mode, but nothing happens, I unlocked the bootloader, tells me the overwrite process He has been successful, but the recovery is always that of the parent. Does anyone have a solution to this problem? Thank you
Then main thing is that you can't boot OOS or hydrogenos after installing TWRP, or else they will replace the recovery back to stock.
pitrus- said:
Then main thing is that you can't boot OOS or hydrogenos after installing TWRP, or else they will replace the recovery back to stock.
Click to expand...
Click to collapse
I realized then how I should proceed after flashing the recovery mode?
kenny72 said:
Hello everyone, I bought a week the OnePlus 2 from the official website, I would like to install the CM13, I tried in every way to flash the recovery mode, but nothing happens, I unlocked the bootloader, tells me the overwrite process He has been successful, but the recovery is always that of the parent. Does anyone have a solution to this problem? Thank you
Click to expand...
Click to collapse
Follow this: https://forums.oneplus.net/threads/...-custom-recovery-root-efs-backup-more.345478/
You can use OOS after flashing TWRP (Hybrid TWRP).
Please read the guide in the official CM13 thread, this has been answered to many times already.
pitrus- said:
Please read the guide in the official CM13 thread, this has been answered to many times already.
Click to expand...
Click to collapse
Tanks All!! Solved
You should notice that :
1.twrp 3.0.2.1 [ Latest ] is for O2OS/H2OS beta version ( Marshmallow firmware)
2.twrp 3.0.2.0 is for O2OS/H2OS stable version ( Lollipop firmware)
make sure the firmware version matches your recovery
Too late to post this ... ha!
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ones who are on stock recovery and just want to update their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
I created this thread to help the CM13(Official or Sultan's)//any custom rom using new BL,users who want to update their BL without flashing the OOS through the tedious way just to update BL and users who are stuck on bootlogo due to old BL with roms using new BL.
Here I will guide you through the required steps to update our bootloader "In easiest and fastest way without wiping and restoring anything".
So what are we waiting for ,lets start .
Prerequisites
you will need two files for this process,nothing else.
1 . First one is BLUpdater zip --->Here.
2. Second is TWRP compiled from latest sources use either This or the one from Here<--use v41 or use Sultan's from Here OR if you are Martin's fan like me and want to use his MutiRom TWRP goHere.
PS:I am assuming you have Unlocked Bootloader and have either
official/blu_spark/sultan's/ Multirom TWRP installed,in a working condition on OOS2.x BL(if not what are you doing here).
Note: make sure oem unlocking is checked in developer options in your current rom,else updating the BL may cause it to get locked ,and you will have to unlock it again and flash the recovery manually through fastboot itself.
Now the steps
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
NOTE:If you chose to use Sultan's recovery.zip then just flash it normally.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Now voila you should have updated your firmware/BL.Congrats.
You can now install any rom that supports the new BL.Older roms won't boot on the new MM BL.So check the rom thread before installing the rom and later on quacking here about your device being stuck at bootlogo.
Notes
i)Neither I nor XDA will be responsible if your OPX bricks or explodes or ditches you and flies to space.
ii)We are not touching system partition so last installed ROM will be intact.
iii)This guide will leave you into bootable rom only if you have a rom installed that works on latest firmware.
iv)This can also be used to restore all your OPX partitions back to OOS3.x partition state,if you messed any.
v)In case you are using latest nightly (cm13) and face bootloop - go Here
psst:If you are not diggin the new BL,and wanna downgrade again ,back to old BL,check this post.
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
matwaking said:
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ons who are on stock recovery and just want to their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
So I created this thread just to shorten the process provided by Joshwin.I also created this thread to help the official CM13 users who have problem with latest nightlies due to new bootloader or are stuck in bootlogo.
...
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
Click to expand...
Click to collapse
Booomshkalaka!!!
Great guide, can't test (already have new bootloader and too lazy to switch back but look very good.
Thx to all
Kurt
Kurt Krummbein said:
Booomshkalaka!!!
Click to expand...
Click to collapse
Lol .
Thanks mate.
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
jonrodz said:
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
Click to expand...
Click to collapse
Will work with any twrp,no requirement of official one.
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
jonrodz said:
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
Click to expand...
Click to collapse
No it wont,right now almost all the custom roms need to update to support new firmware.Only latest cm13 nightlies are booting now,also aosp compiled by olddroid for new BL(shh its only for testers right now)
also maybe the MIUI8 port ,just posted in the forums.
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
jerikooo said:
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
Click to expand...
Click to collapse
no update the BL using the steps above ,then flash the latest nightly.That way it would be good.
Or you can flash nightly first then update BL.Choice is yours.I recommend updating the BL first.
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Duplicate post.Deleted
ccaappton said:
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Click to expand...
Click to collapse
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
matwaking said:
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
Click to expand...
Click to collapse
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
ccaappton said:
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
Click to expand...
Click to collapse
Well no fix without any problems hehehe,.Haapy 4 u.
Click that button if you think my posts are useful
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Manelit said:
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Click to expand...
Click to collapse
taking you wanna flash ashwins cm14 right. You just wanna follow the instructions in first post and then flash the cm14.No need to install the whole Oos zip.
This way you should have updated BL and working cm14.
Just flash the cm14 after booting into new TWRP
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
slaav said:
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
Click to expand...
Click to collapse
Press that sweet sweet button mate
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Click to expand...
Click to collapse
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
walsash said:
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
Click to expand...
Click to collapse
u can flash bluespark twrp via fasboot
Sent from my ONE E1003 using XDA-Developers mobile app
Hello. When I try doing a Backup in TWRP, I get the error shown in the attachment.
Can anyone help me with this?
Looks like TWRP never decrypted the data partition on your phone.
You need to include a lot more information if you expect people to be able to help you.
What version of TWRP are you using?
What version of OOS or are you on a custom ROM?
Did the backups ever work before?
Did TWRP ask you for your Password/Pin/Pattern when it booted?
Hello and thanks for responding.
TWRP: Bluespark 3.2.3
OOS: 9.0.13 (I just rooted, no custom ROM installed)
This is my first time trying to backup.
TWRP didn't ask me for a pin/password when I first ran it*
* I think
Thanks for the additional information, it definitely helps to see what could be wrong. I hope I didn't come off with the wrong tone in my message.
It looks like you might be using an old version of TWRP that does not support the decryption of internal storage.
Try the one from this thread https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
Use the link that says "TWRP 3.3.1-6 Unofficial Installer by mauronofrio"
If you have an otg cable you can put the file on a flash drive and flash that way. Otherwise you will have to follow the install guide section in the first post I linked.
Let me know if that works for you.
Oh dear.
I followed the install guide here (without issue): https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
And after, when I try to boot the phone normally, it boots to recovery and asks for the pin. After I enter the pin I'm just in recovery. I can't seem to get back to a normal boot.
Ok, I flashed Magick and now I think I'm good.
Thanks for your help! I can now do backups.
FligMupple said:
Ok, I flashed Magick and now I think I'm good.
Thanks for your help! I can now do backups.
Click to expand...
Click to collapse
Always flash magisk after installing the custom recovery. Now ya know lol