Install Google Fit.
...so who's got some of those "defective" screen protectors without sensor cut outs? Will be them from you for cheap!
None of the vendors have it in stock?
Well, I was able to see the screen for 5 calls. Now it's back to black as soon as call registers.
Really weird. Think Fit does somehow effect proximity sensor. Many 5 and 6 users (who only have black screen in call after upgrade to 6.0) are reporting that disabling Google Fit fixed their problems.
i'm so confused, so is it to install google fit or not?
Can't hurt to try. When I first installed it, my phone was working correctly. But that only lasted for 5 calls.
Not working for me, didn't try the phone call, the ambient display still disabled. So this is only a partial fix, not really useful.
Where is the proximity sensor on the the N6P?
perveeus said:
Where is the proximity sensor on the the N6P?
Click to expand...
Click to collapse
Right where that cut out on my screen protector is on the lower right hand side of the top speaker.
Thank you buddy! Just curious if you've run into the screen going black during calls? If you is it attributable to the screen protector?
perveeus said:
Thank you buddy! Just curious if you've run into the screen going black during calls? If you is it attributable to the screen protector?
Click to expand...
Click to collapse
I haven't had any problems with calls going black at all. My screen protector doesn't block the sensor so it works just fine.
Namuh said:
I haven't had any problems with calls going black at all. My screen protector doesn't block the sensor so it works just fine.
Click to expand...
Click to collapse
Appreciate the feedback. Just seems odd that it's affecting the Nexus 6 crew also.
Related
i tried to search the forum with no results btw
have two cases while receiving/calling with hd2
1. via bluetooth headset - even when the phone is in the pocket some apps starts randomly, even call is disconnected - isn't proximity should cause phone scrren to be blank all time?
2. via the phone - sometimes while talking screen is still dark and pressing eg. home key puts display on. sometimes moving phone away from ear turns screen on.
do you have some or its something with my phone?
I have the same problem, the proximity sensor does not work, I think it works only outside when you have strong light, try it and let me know.
make a call the screen will go off now move it from your face loking up at the sun outside you will see that the screen will turn on.
it works only when I makes a call. when I am getting a call it atays on.
kochav
kochavy said:
I have the same problem, the proximity sensor does not work, I think it works only outside when you have strong light, try it and let me know.
make a call the screen will go off now move it from your face loking up at the sun outside you will see that the screen will turn on.
it works only when I makes a call. when I am getting a call it atays on.
kochav
Click to expand...
Click to collapse
Well you would be wrong then.
It's a proximity sensor, not a light sensor. I just made a call in my darkened room and the proximity sensor functioned flawlessly.
thake the screen protector out or cut it and the proximity sensor will work perfect.
kochavy
kochavy said:
thake the screen protector out or cut it and the proximity sensor will work perfect.
kochavy
Click to expand...
Click to collapse
Wow who would've thought that covering up a sensor designed to sense when objects are close to it would impede its functionality.
Your revelation hepled me fix the microphone on my phone. It wasn't working, and then I realized I had my hand over it!
Yes I have had issues even with the original HTC screen protector which has two small holes directly over the sensors. I finally had to remove it.
Cutting the protector I have not been very successful so far. This creates sharp edges and the protector tends to peel off from that point. For the time being I am relying on the fact that the screen on the HD2 is scratch resistant enough that with normal care it would not get scratched. With over 2 months of use without a protector my screen is still scratchless.
IF it is anything to do with the screen protector, then there are plenty out there that don't have this effect.
I've got a protector on my HD2 and have had it there since just after I got it, so just over 2 months now. The screen protector has worked perfectly, even, kochavy, in the dark, because it detects proximity not light.
I suggest removing any screen protectors and seeing if you still have the problem. If you do, send the phone back as faulty. If you don't, get a better screen protector.
johncmolyneux said:
IF it is anything to do with the screen protector, then there are plenty out there that don't have this effect.
I've got a protector on my HD2 and have had it there since just after I got it, so just over 2 months now. The screen protector has worked perfectly, even, kochavy, in the dark, because it detects proximity not light.
I suggest removing any screen protectors and seeing if you still have the problem. If you do, send the phone back as faulty. If you don't, get a better screen protector.
Click to expand...
Click to collapse
do you have the original HTC screen protector with the two holes? there are some protector that does not cover the top of the phone and leave the two sensors out from protection.
kochavy said:
do you have the original HTC screen protector with the two holes? there are some protector that does not cover the top of the phone and leave the two sensors out from protection.
Click to expand...
Click to collapse
No I don't. The one that came with it never please me much, so I bought some better ones.
The protectors I have don't have any holes for the sensors at the top, but like I said, it just works perfectly. There's a lot more to this issue that just the screen protector, as some people have reported that it works perfectly when they ring certain number, but not when they ring others. From what I've read on other threads, this is commonplace for people who are having this problem, so it's obviously not an issue with their screen protectors. It sounds like a software issue to me, but since it can't be identified as such, they should just return their phones as faulty and hope the replacement doesn't have the same issue.
It would be interesting to know if the people with the described issue have upgraded the ROM to 1.66, as this seems to have fixed a whole slew of issues.
Sensor works by reflecting infrared light. There is small IR lamp with IR detector nearby. You can check that by looking at the sensor through some digital camera or camcorder, whose are usually sensitive to this light. Don't forget the phone must be in call, otherwise the sensor is turned off.
I think the sensor itself is OK. But there seems to be some relationship with guess what .. G-sensor ! Once I found the screen just won't go off during call, and it was when I was lying during the call, and I was holding the phone upside down portrait style.
But as I turned the phone to normal position (normal portrait) and back, it started to work with no problem.
I only had problem with proximity sensor once since then .. but rotating the phone up and down helped again.
I think this needs more investigation .. if you encounter the problem try this.
The problem is that the screen will stay off during calls. That means I can't hang up...
The only way to get the screen on is bright light against the sensor.
Is there any way to calibrate the sensor?
I don't think so. But as you say, it's a proximity sensor, so it should measure a distance and not need light to wake the screen. And as far as I know, the light sensor isn't used in calls.
But you could use the key under the screen to hang up
Yes, that's pretty weird actually, but that's how it is...
But no, I can't hang up since there are no hard buttons. Only the touch-sensetive ones, and they don't work when the phone thinks it's at someones ear.
Screen protector and proximity sensor
I have installed on my HD Mini a very good quality screen protector. During phone call my screen became black like my ear is on the phone, but my phone is on the desk ! If I remove the screen protector the proximity sensor come back to work correctly. Any idea how to set-up or adjust proximity sensor sensitivity ?
Me too!
I have this problem too!
Your phones have a screen which is made of really good strong glass. Using a screen protector is useless. I have had a Hero (also a capacitive touchscreen phone) for 6 months and, while I do keep it in a holster, I have rubbed it on my shirt, dropped it and used my finger on it all day long. It still is spotless. Stop wasting money on protectors and just use the phone. And having a protector is bound to screw up the proximity sensor.
As far as it not recognizing that the phone is not against your ear.... that is a matter for the service department to solve since it seems like a hardware fault.
Really strange! I've a screen protector but don't have this problem... the sensor works fine!!!
bellor
It's made out of plastic, really easy to make scratch. And it's very fingerprint attractive. So glossy filter is really good solution.
BeemerZ1
Same problem, proximity sensor work really weird.
Hi guys, I have the same problem on my HTC HD Mini, when you make a call the screen goes black and will not allow to end call. I have to take battery out to make it work again. I was looking at the registry tweaks for HTC HD2 (leo) and am wondering if those tweaks will work on my mini.
Please, if anyone has a solution, put it on here, have even tried replacing the glass to resolve but not working still.
Same problem. I tried an experiment... when i'm in a light room, works. when i'm in a dark room doesn't work. Really stupid... without light doesn't work!!
If you would, try to put the mini under light when is in calling...
In fact, that's quite normal. If you're calling in a dark room, how do you expect that your phone can "see" the difference between the darkness of your ears and the darkness of the room?
Are you using a screen protector?
I used to have the same issue. But once I remove the screen protector the screen turns back on straight after a phone call.
I believe that the proximity sensor is confused and is affected by having an object pasted over it.
so if someone could experiment with just removing he corner of the screen protector to avoid the sensor, you will not have a issue.
I am using the mini with a screen protector and it has been fine in my pocket...but I am not saying you should try!
My 2 cents!
S-ed said:
bellor
It's made out of plastic, really easy to make scratch. And it's very fingerprint attractive. So glossy filter is really good solution.
Click to expand...
Click to collapse
its made of carbonized whatever mixture just like any other capacitive screen and no theres no way to scratch that thing, iam wearing it in a pocket together with my keys since i bought it and theres no single scratch there, yet the fingerprint thing is very annoying indeed but thats because the material of the screen is very very close to glass.
fongyiktze said:
I used to have the same issue. But once I remove the screen protector the screen turns back on straight after a phone call.
I believe that the proximity sensor is confused and is affected by having an object pasted over it.
so if someone could experiment with just removing he corner of the screen protector to avoid the sensor, you will not have a issue.
I am using the mini with a screen protector and it has been fine in my pocket...but I am not saying you should try!
My 2 cents!
Click to expand...
Click to collapse
The lcd and digitiser have been replaced and there is no screen protector on the device. I purchased the lcd and digitiser as a complete unit so as not to have any issues.
The seller reassures me that the product was brand new and had been fully tested. I no longer have the old pieces to test against but this problem seems quite common from the threads on here and gsm forum.
Any solutions or ideas for resolution greatly appreciated, near to pulling all my hair out!!!!!!!!
I have screen protector and I do not have any problem with sensor. Everything works great..
i have the same problem as you.. when i am in a call i cant end it because my screen is black all the time.the only solution i found is when i call i turn the speaker on.please help us
p.s where on the screen is the proximity sensor??
spithash said:
i have the same problem as you.. when i am in a call i cant end it because my screen is black all the time.the only solution i found is when i call i turn the speaker on.please help us
p.s where on the screen is the proximity sensor??
Click to expand...
Click to collapse
up on right side
_Madmatt said:
In fact, that's quite normal. If you're calling in a dark room, how do you expect that your phone can "see" the difference between the darkness of your ears and the darkness of the room?
Click to expand...
Click to collapse
Yes I know... I meant that only works in bright light conditions, such as directly under a lamp or sunlight. in a room or just the shade does not work. So it's "only"a matter of adjusting the sensitivity of the light sensor. I do not even understand how it can be made this "proximity sensor", all I know is that it works with light. Rather, there is a program like the shake'n wake can use?
I have this annoying problem, too.
But I have to say: I have NO screen protectror, and: the divece was repaired by arvato-Services after a broken display. And I didn't have this problem before!
Sometimes i seems to help to puff serveral times into the loudspeeker, so that the screen returns and I'm able tu hang up the call. But sometimes it doesn't works, and if I had spoken to a mailbox (and the other end didn't hang up, so that i MUST hang up) the last solution was to remove the battery.
If there is a way to disable the sensor (i.e. in the registry)?
kind regards
Ye same thing, Mine will only bring the screen back during a call if it is under a very bright light.
Any ideas yet?
Just wanna ask if there is any temporary fix to the proximity sensor of nexus 4.
During calls the screen doesn't turn off when placed close to the face.
I didn't get the chance to test it on stock 4.2 because when i turned my phone on it updated first to 4.2.1. Ever since then it has had proximity sensor not working during calls.
And i have never had any screen protectors on the screen.
Tried many custom ROMS as well but no difference at all.
Sent from my Nexus 4 using xda premium
how about kernals could be a bug in franco.
return it to 100% stock make sure its still doing it under those conditions then if it is contact Google and ask for an RMA this is probably your best course of action. if it has been like this since you pulled it out of the box then contact google right now and tell them the proxmity sensor is clearly broken
I have this issue too, but I'm on CM. Not sure if it's CM being a problem. Can someone on STOCK comment?
BTW as for screen protectors, unless you have a giant bubble or crap on your protector or underneath in the adhesive layer, the proximity sensor should perform fine. Before you blame my screen protector, I downloaded a proximity sensor app to show the readout. The screen protector with no cutout is fine. It's not optimal to have one like that, but the proximity sensor works fine.
isnt there a proximity senor app which lets you test it on the market?
dmo580 said:
I have this issue too, but I'm on CM. Not sure if it's CM being a problem. Can someone on STOCK comment?
Click to expand...
Click to collapse
Using stock. No issues on the sensor. Turns off on calls and turns on when I remove from the face. Have a spigen protector on with a cutout for it
Sent from my Nexus 4 using Tapatalk 2
dmo580 said:
I have this issue too, but I'm on CM. Not sure if it's CM being a problem. Can someone on STOCK comment?
BTW as for screen protectors, unless you have a giant bubble or crap on your protector or underneath in the adhesive layer, the proximity sensor should perform fine. Before you blame my screen protector, I downloaded a proximity sensor app to show the readout. The screen protector with no cutout is fine. It's not optimal to have one like that, but the proximity sensor works fine.
Click to expand...
Click to collapse
I was on stock 2 weeks ago when I started noticing it.
I am on cm now as well and its very much messed up.
Sent from my Nexus 4 using xda premium
bobola said:
isnt there a proximity senor app which lets you test it on the market?
Click to expand...
Click to collapse
There is.
I've installed and tested.
According to the app results, The proximity sensor seems to know when my hand is on it and when its off it. The value changes from 1.0 to 2.0
It just won't work on phone calls.
Sent from my Nexus 4 using xda premium
noobdeagle said:
how about kernals could be a bug in franco.
return it to 100% stock make sure its still doing it under those conditions then if it is contact Google and ask for an RMA this is probably your best course of action. if it has been like this since you pulled it out of the box then contact google right now and tell them the proxmity sensor is clearly broken
Click to expand...
Click to collapse
It doesn't seem to be a hardware issue.
Sensor tests were made and the proximity sensor picks up when my thumb is placed on it.
Problem is on phone calls alone. Right from stock ROM to CM, PA, Xylon, AOKP, almost all of the ROMs.
Sent from my Nexus 4 using xda premium
slimldj said:
It doesn't seem to be a hardware issue.
Sensor tests were made and the proximity sensor picks up when my thumb is placed on it.
Problem is on phone calls alone. Right from stock ROM to CM, PA, Xylon, AOKP, almost all of the ROMs.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Mine is stock and during calls it usually goes to my settings menu and changes my clock setting. When I get off the phone, screen is blank and I hit power button to end call. Still annoying at times when the clock changes.
any luck with finding a fix for the proximity sensor? Mine never works when I'm in a phone call. I have to either wait for the call to end or reset the phone by holding the power button to end the call.
feedmylittletroll said:
any luck with finding a fix for the proximity sensor? Mine never works when I'm in a phone call. I have to either wait for the call to end or reset the phone by holding the power button to end the call.
Click to expand...
Click to collapse
I think it's a bug and not a hardware issue. Perhaps one of the other reason for having a new factory image soon.
Sent from my Nexus 4 using xda premium
feedmylittletroll said:
any luck with finding a fix for the proximity sensor? Mine never works when I'm in a phone call. I have to either wait for the call to end or reset the phone by holding the power button to end the call.
Click to expand...
Click to collapse
I'm suffering this same problem too, hope they fix it soon..
slimldj said:
I think it's a bug and not a hardware issue. Perhaps one of the other reason for having a new factory image soon.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yes I think the fact that the app testing showed the sensor working so it points to software. Something is missing when the phone is in a call its not connecting to turn off. I thing Jellybean was flawed in many ways. My drop down brightness slider doesn't work for me nor auto brightness its OK for me cause I don't use either but still makes me mad.
Using Tapatalk 2
meetoo
Same problem here. Nexus 4. Stock Android 4.2.1. No screen protector installed.
While I'm in a call - the proximity sensor seems to work, as the screen goes dark... but at the end of the call when removing the phone away from my face, the screen does not come back on - making it impossible to hang up on the call (unless the caller on the other end hangs up first). It also makes it difficult to impossible to switch to and from speakerphone in the middle of a call.
Pushing the power button when this happens doesn't wake the screen either... sometimes it flashes but then goes black again. It doesn't happen on every call... maybe 75% of the time it does happen though. I've installed the proximity sensor app and it seems to recognize "covered" and "uncovered" states correctly when I cover the sensor at the top left corner of the phone while not in a call... so I'm thinking this is actually a software issue with the sensor and not a hardware issue. Drives me nuts though.
I've set "accessibility settings" to have the power button hang up calls as a temporary workaround... we'll see how that works.
treaty said:
Same problem here. Nexus 4. Stock Android 4.2.1. No screen protector installed.
While I'm in a call - the proximity sensor seems to work, as the screen goes dark... but at the end of the call when removing the phone away from my face, the screen does not come back on - making it impossible to hang up on the call (unless the caller on the other end hangs up first). It also makes it difficult to impossible to switch to and from speakerphone in the middle of a call.
Pushing the power button when this happens doesn't wake the screen either... sometimes it flashes but then goes black again. It doesn't happen on every call... maybe 75% of the time it does happen though. I've installed the proximity sensor app and it seems to recognize "covered" and "uncovered" states correctly when I cover the sensor at the top left corner of the phone while not in a call... so I'm thinking this is actually a software issue with the sensor and not a hardware issue. Drives me nuts though.
I've set "accessibility settings" to have the power button hang up calls as a temporary workaround... we'll see how that works.
Click to expand...
Click to collapse
Having the exact same issue here too on stock ROM.
Good idea on the accessibility settings! Will work until/if they fix it..
Also no screen protector.
I had the opposite problem to this where my screen would stay off during a call and I have to force restart to regain control.
Turns out it was the rubbish screen protector causing the issue. This was quickly fixed by cutting the screen protector so that the sensor was uncovered.
Dav_prime said:
I had the opposite problem to this where my screen would stay off during a call and I have to force restart to regain control.
Turns out it was the rubbish screen protector causing the issue. This was quickly fixed by cutting the screen protector so that the sensor was uncovered.
Click to expand...
Click to collapse
It was the same fix for mine when I first got my bse it worked fine for about a week but then over time it got worse. It was the screen protector just that lil bit worth of it wear caused enough blockage of the sensor. I got some new bse's and they now have a cutout for the proximity sensor and are screen optimized.
Sent from my Nexus 4 using Xparent Blue Tapatalk 2
use Proximity Actions by Novum Inceptum in playstore
rat99 said:
use Proximity Actions by Novum Inceptum in playstore
Click to expand...
Click to collapse
That won't fix anything.
Do your Nexus 6P screen go black during a call. Mine does on every call. My display settings is set for 1-minute. I call Huawei support. The lady says that the screen is suppose to go and stay off during a call. Never heard of that from a phone. You cannot respond or do anything during the call.
lskeys said:
Do your Nexus 6P screen go black during a call. Mine does on every call. My display settings is set for 1-minute. I call Huawei support. The lady says that the screen is suppose to go and stay off during a call. Never heard of that from a phone. You cannot respond or do anything during the call.
Click to expand...
Click to collapse
Lol - most, if not all do that!
But, it's supposed to come back on when moved away from your ear.
Standard behavior.
You have something blocking proximity sensor?
do you have a screen protector? if so, you need one that has the cut out for the proximity sensor.
happened to me. i thought it was a setting or my phone was defective. Found out it was a early production screen protector that didn't have the cut out for the proximity
lskeys said:
Do your Nexus 6P screen go black during a call. Mine does on every call. My display settings is set for 1-minute. I call Huawei support. The lady says that the screen is suppose to go and stay off during a call. Never heard of that from a phone. You cannot respond or do anything during the call.
Click to expand...
Click to collapse
I have this problem as well.
You must have a screen protector or tempered glass protector that covers the proximity sensor. The proximity sensor is under the top speaker on the right side bottom right corner. If you don't have a cut out there for the sensor, then that is why your screen is stuck black. If you have no screen protector, you have a real problem. I thought at first it was caused by google voice but after some google searches I seen that the culprit is my screen protector. I am leaving it on till my new one comes in a few days, but you can go to settings->accessibility-> and turn on hang up phone with power button.
TNS201 said:
I have this problem as well.
You must have a screen protector or tempered glass protector that covers the proximity sensor. The proximity sensor is under the top speaker on the right side bottom right corner. If you don't have a cut out there for the sensor, then that is why your screen is stuck black. If you have no screen protector, you have a real problem. I thought at first it was caused by google voice but after some google searches I seen that the culprit is my screen protector. I am leaving it on till my new one comes in a few days, but you can go to settings->accessibility-> and turn on hang up phone with power button.
Click to expand...
Click to collapse
The thing is that the phone turns black when I make a call or take a call. As soon as I am in a call. I cannot see the screen in a call or press a number or anything. Its all black. I do have a skinomi screensaver on. Cannot see a sensor anywhere. Are you getting a new phone or screen saver. BTW, I did a factory refresh of the phone. Still nothing. Do you think taking the screen saver off will help?
lskeys said:
The thing is that the phone turns black when I make a call or take a call. As soon as I am in a call. I cannot see the screen in a call or press a number or anything. Its all black. I do have a skinomi screensaver on. Cannot see a sensor anywhere. Are you getting a new phone or screen saver. BTW, I did a factory refresh of the phone. Still nothing. Do you think taking the screen saver off will help?
Click to expand...
Click to collapse
Yes if you have a screensaver on that's blocking the sensor it won't function correctly. A bunch of people are having these problems with screensavers glass and film ones.
notfaded1 said:
Yes if you have a screensaver on that's blocking the sensor it won't function correctly. A bunch of people are having these problems with screensavers glass and film ones.
Click to expand...
Click to collapse
I cut the top part of the screen saver off. Thanks, btw what kind of screen saver did you order?
lskeys said:
I cut the top part of the screen saver off. Thanks, btw what kind of screen saver did you order?
Click to expand...
Click to collapse
This is what I ordered
http://www.ebay.com/itm/201451006487
You can see where the sensor is below the top speaker bottom right corner
itstee said:
do you have a screen protector? if so, you need one that has the cut out for the proximity sensor.
happened to me. i thought it was a setting or my phone was defective. Found out it was a early production screen protector that didn't have the cut out for the proximity
Click to expand...
Click to collapse
But it's suspicious that the N5/N6 people are having this issue at or near the time Marshmallow was introduced.
https://productforums.google.com/forum/#!topic/nexus/oqh-V37hgDM
& one N6P member has sort of verified this:
http://forum.xda-developers.com/showpost.php?p=63693059&postcount=9
perveeus said:
But it's suspicious that the N5/N6 people are having this issue at or near the time Marshmallow was introduced.
https://productforums.google.com/forum/#!topic/nexus/oqh-V37hgDM
& one N6P member has sort of verified this:
http://forum.xda-developers.com/showpost.php?p=63693059&postcount=9
Click to expand...
Click to collapse
well i suggest removing the screen protector if you have one that covers the proximity sensor. worked for me and haven't experienced it yet
itstee said:
well i suggest removing the screen protector if you have one that covers the proximity sensor. worked for me and haven't experienced it yet
Click to expand...
Click to collapse
Yep_removed it last night.
Symptom was still there this AM.
Went away for one phone call.
Now back after sitting with no calls for a couple hours.
perveeus said:
Yep_removed it last night.
Symptom was still there this AM.
Went away for one phone call.
Now back after sitting with no calls for a couple hours.
Click to expand...
Click to collapse
that sucks..
itstee said:
that sucks..
Click to expand...
Click to collapse
Ha, right?!
But at least it is not me only and apparently symptomatic with numerous reports in that Google product support forum I posted above.
I had the issue removed the screen protector works fine now.
Sent from my Nexus 6P using Tapatalk
Hi!
The last week I'm experiencing that the proximity sensor is not working on my OP 8 Pro. During phone calls the screen is not powering off, pocket mode is not working at all and so on. I have tried some apps that check this sensor and they don't recognize proximity either.
I installed recently the Nillkin screen protector that has a black frame arround. I don't know if the issue might be related to the screen protector but I want to know if someone else has experienced this issue before removing the screen protector or opening a support ticket to OnePlus.
Much appreciated.
I had same issue with phone calls, the sensor wasn't working. I had temper glass screen protector took it off problem solve.
Sent from my IN2025 using Tapatalk
Nochis said:
I had same issue with phone calls, the sensor wasn't working. I had temper glass screen protector took it off problem solve.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for the fast response. I will try tomorrow morning but I suspect you are right. Seriously, a really bad play from Nillkin... They should have tested that, more if they are a recognized brand as they are.
I don't think it's screen protector issue..Oneplus 8 Pro doesn't seem to have hardware proximity sensor...this has been an issue on 7 Pro and 7T as well...
WeedBilbao said:
Hi!
The last week I'm experiencing that the proximity sensor is not working on my OP 8 Pro. During phone calls the screen is not powering off, pocket mode is not working at all and so on. I have tried some apps that check this sensor and they don't recognize proximity either.
I installed recently the Nillkin screen protector that has a black frame arround. I don't know if the issue might be related to the screen protector but I want to know if someone else has experienced this issue before removing the screen protector or opening a support ticket to OnePlus.
Much appreciated.
Click to expand...
Click to collapse
Do you use oos11 or google phone app?