My unlocked Note 2 is busted up, so while I'm waiting for parts, I'm borrowing my sister's long abandoned pink M.
I upgraded the firmware, unlocked the bootloader, installed TWRP 2.8.6, and tried installing Dirty Unicorns. Stuck at boot screen overnight.
Got it back into recovery, and am currently experiencing the same issue with Exodus.
I wiped all but internal, which is where the install files are, but didn't format.
Do I need to install a 4.3 or 4.4 rom first?
Yes. Yes there is.
Installed CM11.
Immediately rebooted into recovery and was able to successfully install DU.
Related
I've encountered a strange problem with my nexus 7. As soon as I install a custom rom (I've tried the latest nightly of Carbon and Slimbean) with a full wipe my device does not boot up. It stucks on the carbon, respective slimbean, bootscreen. Another strange thing is that the latest CM nightly seems to work without any problems.
I even tried to flash a factory image and then reflashed the recovery (TWRP 2.6.3) to try the mentioned custom roms again. Still no luck - CM did work again.
So, do you guys have a solution to this problem? I've used both roms in the past as my daily driver, so I am out of ideas for now...
No suggestion, but I just flashed SlimBean on mine from a full wipe, and I'm having the same issue.
I tried SlimBean again, and it worked. Here's what I did:
1. Updated my bootloader. Mine was still 4.13, and it looks like the most recent version is 4.23. I flashed the img from this post using NRT.
2. Went back to unrooted stock with NRT. (I had to update my bootloader to do this.)
3. Let it boot back into unrooted stock, wept with joy, made a nandroid from NRT.
4. Flashed the SlimBean 1.9 weekly and minimal gapps from NRT's advanced area.
5. Watched in amazement as it boots obediently. Let sit about 10 min, and rebooted.
I'm essentially lazy, so yes I used NRT instead of manually pushing everything with ADB. ADB was plan B. It was briefly plan A, but I got tired of trying to convince the Android SDK that I did in fact have the Java JDK installed.
Mhhhh....
PatrickMac said:
I've encountered a strange problem with my nexus 7. As soon as I install a custom rom (I've tried the latest nightly of Carbon and Slimbean) with a full wipe my device does not boot up. It stucks on the carbon, respective slimbean, bootscreen. Another strange thing is that the latest CM nightly seems to work without any problems.
I even tried to flash a factory image and then reflashed the recovery (TWRP 2.6.3) to try the mentioned custom roms again. Still no luck - CM did work again.
So, do you guys have a solution to this problem? I've used both roms in the past as my daily driver, so I am out of ideas for now...
Click to expand...
Click to collapse
Well I have the same problem with booting Ubuntu touch.... Either it's stuck on white Google Logo or stuck on Cyanogenmod Logo... Have flashed it with TWRP and MultiROM...
Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.
I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija
uglyjohny said:
I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija
Click to expand...
Click to collapse
I don't have access to a micro sd card reader if the file must be placed on the micro SD card. I already have flashed the stock rom supposedly via TWRP, so I shouldn't have to flash it again, I wouldn't think. If I do, I guess I'll have to get a reader.
Yes. Micro sd. Rename it. You have guodes gere on xda. Im hoping it will help you.
poslato sa elmag radija
It didn't work. Still in same state as before.
I also have access to fastboot if that would help.
m27frogy said:
Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.
Click to expand...
Click to collapse
Babsector should still work - you would need t do a search for it
It seems to have worked properly, sort of. Flashing FLEXReaper results in an "Encryption failed." prompt at boot, which the button, of course, does not work. Wiping everything works except that the prompt notes "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p4" Trying to reflash V8 with TWRP with the V8.bat file fails at format. More help?
My tablet is still displaying "Encryption failed", the button still doesn't work, and I still love my a500. Help?
Anyone?
I guess I'm screwed, then.
In the end, I think my data partition failed. Formatting or wiping data fails and when installing FlexReaper, it reports /data size as -1. Unless anyone knows how to fix flash memory, I think I'm stuck.
So I was on a early January build of Mahdi Roms. I decided today to update it. I was told to wipe everything flash the radio zip, cloudy rom. let it boot up then flash the new mahdi rom.
However, im on twrp 2.6.3. and when i flashed the radio and flashed the stock rom it booted up into twrp instead. I tried wiping and reflashing but it failed. I tried to reboot but it said my device isnt rooted and need to install SU so i swiped to continue however my device froze on the LG logo for about 10+ minute. So here I am still with no working phone for about 2 hours
any idea as to what to do?
Hi guys, the times has come for me to open up my own account - I screwed up. I hope this is the right sub forum and apologize if it is not.
LG G2 Germany, formerly: TWRP recovery, Paranoid Android 5.1.1
Loved the rom but there were some issues like the screen turning off and on randomly, wouldn't accept pin right away, so I decided to go for CM 12.1.
Booted into recovery, factory wiped, tried to flash the .zip, but neither the rom nor the gapps would even begin to flash. It just said error.
Went crazy, tried some other CM versions, none of them worked. I've never had this issue before, when I flashed PA it all went just peachy.
Went even crazier and I can't really remember what I did in my panic spiral, but I somehow ended up with a soft-bricked phone. Managed to re-install the LG firmware .kdz, however, only the 4.2 one worked (4.4 gave me a bootloop.)
Now, getting this bad boy rooted and ready to flash custom roms is somewhat of a problem. I managed to get it into recovery though (after some issues with the recovery image), but flashing CM still won't work. Same error as before. I think there may be something wrong with the recovery image. I still had the image .apk from the first time I rooted my phone (also with 4.2) and it worked just fine so I figured I'd just use it again and do it like I did it last time. However, I am able to get into recovery mode. I've tried ClockworkMod and TWRP, but as a result of my panicking, it's just really a big ol' mess right now. I hope I've included all the info needed.
Please help, I'm actually lost.
Are you flashing the latest TWRP which is 2.8.7.1?
http://blastagator.ddns.net/twrp.html
Hey, thanks for replying. At the moment it only boots into recovery, unfortunately. ADB does not work, even after re-installing the usb drivers. My computer recognizes the device now though, but I can't get any files onto that thing at the moment.
Edit: It's not the latest TWRP
If you install the latest TWRP, you may be able to boot into TWRP and copy over a ROM to flash.
Phone is Lenovo A6000, not plus. I installed multiple TWRPs, 3.1.0 and 2.9 something.
I even installed CWM, still couldn't boot to the recovery.
Now, I know how to flash with fastboot, and I know how to boot. Booting doesn't work at all, it says "booting" and never finishes.
Flashing says "okay" and I reboot, do a reboot to recovery, and I get put into bootloader/fastboot.
Any help? I just bought the phone today, no one messed with it.
Edit: Nevermind. CWM installed. How do I install TWRP, so it works? Also, forgot to mention that the phone has the latest stock rom, 4.4.4.
Edit#2: While trying to install "TWRP-3.1.0-Lenovo-A6000.img",
I got an error.
"Can't open /tmp/update.zip (bad)"
"Installation aborted."
Edit#3: Same error with multiple TWRP images.
First of all the twrp 3.1.0 is meant for nougat roms. Since you are flashing that recovery on KitKat rom which it won't support. So first try updating phone to stock lollipop. Then flash twrp 2.8. then take a complete backup(most important) and save it on SD card. After that flash any rom you want. If you are flashing marshmallow or nougat rom then after flashing rom flash 3.1.0 twrp.
I have long ago (10 minutes after last edit) fixed the problem already by flashing stock firmware through some weird software, and then started updating to latest lollipop firmware, and then installed TWRP 3.1 and then installed RR android version 7.1.2. But, thank you for trying to help. I hereby ask a moderator to close the thread because the problem was resolved. Thank you.