I was having problem of device not recognized by PC at fist stage and i thought it was software issue and did factory reset and still problem was not solved and thought installation of cynogenmod would solve my problem so i followed the steps to install and rooted my device and as my PC dont recognize my phone i downloaded Autorec and followed simple steps and my phone stuck in fastboot mode and PC also dont recogize my phone..when i try to open download mode it goes back to fastboot mode...Any suggestion and help would be highly appriciated.
Related
Hi all,
My phone is bricked with following syptoms:
1) Not being recognised in download mode
2) Adb without root acess (unable to push files)
3) No recovery
Detailed problems
I have a (Korean) Lg G2 (F320s) and its stuck on bootloop. It goes into download mode with Vol + with plugging into computer but the computer doesnt recognise it as attached...no sound, nothing in device manager and no found by Lg Flashtools or Kdz updater.
When simply turning on i connect it to the PC it shows as an ADB interface device and i have ADB but no root authorization (my phone was rooted before).
Lastly when i try to enter recovery it just flashes a couple of times and goes black...back light still on. In this mode when i connect it to PC it shows up several drives and phone comes up as Qhsusb_bulk device. I read a thread using UBUNTU to repair this but it wont work for me....the PC just hangs up and Ubuntu is unable to mount the drives (Even after the settings from Dconf Editor).
Please help i have been stuck for days
Please help
Please help ppl... is there a possible solution to the problem..?? JTAG maybe??
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Put your phone in Emergency Download Mode : switch it off, hold volume down button while plugging USB cable (already connected to the PC).
Then use the Support Tool to go back to LG ROM
mikesrike said:
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Click to expand...
Click to collapse
in these cases emergency mode should work
removing battery sim sd etc... connect your phone to the pc throught us cable pressing vol- it automatically boot into download mode and you can easily use kdz.
make sure you have the last driver from lg websites else kdz wont find your phone, and set emergency option in kdz everything else it similar to a normal flash
Hi everyone . I was following http://forum.xda-developers.com/lg-g2/development-d802/guide-how-to-install-cloudyg2-3-1-d802-t3137055 link to install cloudy2_3.3 rom in my lg g2 . But after rooting and twrp i restarted the mobile it got stuck at fastboot mode.
So i used adb minimal to solve the problem and i erased aboot,boot,recovery,laf files and removed my phone (i mean removed usb cable and disconnected it from laptop) but now I can't see any life in my phone. its not going in download mode and not recognized by laptop as well. I don't know what to do is there any way by which i can save my phone . fix it
Need help.
thanks
Well. First things first. the root of the issue is probably a bad usb port i guess as it's very unstable it even sometimes reboots into download mode on its own when i plug my phone to charge or even gives a Not charging state until i replug it many times then it gives the normal charging (AC) so it's a really messy one.
that's the usual anyway i was rooted and flashed a lollipop rom normally then bugged some apps so i decided to reflash stock kitkat rom however like i said it's a bad usb connection so sometimes the flashing goes slowly and i have to replug the cable for it got smoothly again.
this time i noticed this at 15% and instead of staying in download mode stuck at that the phone rebooted and ofcourse this time only a black screen no download mode no recovery no nothing i guess a typical hard brick? this is my first time dealing with a hard brick so i didn't know what to do at all so i'm still figuring out stuff anyway i installed Qcomm drivers and checked the device manager it's the 9006 one not the 9008 and it shows many drives on my pc (windows 7 64-bit) but no partitions in windows xp 32-bit on another pc and on the laptop it gives no drives i think. i tried with SRK tools it says everything as it should but when it's done i unplug the cable then reboot however still shows many partitions and no download mode.
I don't use my phone alot however i don't own another one so i kinda need help fast please so if anyone has any ideas don't hesitate please.
Thanks in advance.:good:
Update: After following the linux method i now don't have a black screen only stuck on lg logo and still no download mode.
the phone isn't recognized by the pc at all not even 9006 or 9006
the recovery gets stuck at processing and it doesn't say fastboot either on the logo screen.
Croshio said:
Well. First things first. the root of the issue is probably a bad usb port i guess as it's very unstable it even sometimes reboots into download mode on its own when i plug my phone to charge or even gives a Not charging state until i replug it many times then it gives the normal charging (AC) so it's a really messy one.
that's the usual anyway i was rooted and flashed a lollipop rom normally then bugged some apps so i decided to reflash stock kitkat rom however like i said it's a bad usb connection so sometimes the flashing goes slowly and i have to replug the cable for it got smoothly again.
this time i noticed this at 15% and instead of staying in download mode stuck at that the phone rebooted and ofcourse this time only a black screen no download mode no recovery no nothing i guess a typical hard brick? this is my first time dealing with a hard brick so i didn't know what to do at all so i'm still figuring out stuff anyway i installed Qcomm drivers and checked the device manager it's the 9006 one not the 9008 and it shows many drives on my pc (windows 7 64-bit) but no partitions in windows xp 32-bit on another pc and on the laptop it gives no drives i think. i tried with SRK tools it says everything as it should but when it's done i unplug the cable then reboot however still shows many partitions and no download mode.
I don't use my phone alot however i don't own another one so i kinda need help fast please so if anyone has any ideas don't hesitate please.
Thanks in advance.:good:
Update: After following the linux method i now don't have a black screen only stuck on lg logo and still no download mode.
the phone isn't recognized by the pc at all not even 9006 or 9006
the recovery gets stuck at processing and it doesn't say fastboot either on the logo screen.
Click to expand...
Click to collapse
You must have flashed wrong version of the rom .
After trying the linux method, if you cant get into fastboot mode, recovery or not in download mode, then try this : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
This requires you to open your phone so be cautious .
Thanks I followed that guide. Download mode after. Using the Windows tool instead of Linux then flash tool normally.
Hey there guys!!!
Can you please help me with this?
Yesterday i tried to install a new ROM on my LG Android phone (My LG phone is not working properly, it has a reboot loop). I tried to do a factory reset without success -> the dead Android logo appeared :/
I put my phone in Download Mode and connected to the pc but Windows does not recognize my phone.. it says: "USB device not recognized.. the last USB device you connected to this computer malfunctioned and Windows does not recognize it"
I do not know what to do now.. when i try to flash a ROM with the LG Flash Tool it fails because LG program does not recognize my device..
PS: LG Support Tool recognizes my phone (it shows the model) but i cannot flash a ROM
Thanks!!:fingers-crossed: