Hello everyone! I got the device is SM-N900V, although the firmware is written everywhere that this is a SM-N9005, in the end, I decided to gain root and put custom recovery methods for SM-N9005, but in the end, the phone constantly trying to boot into recovery and says "Recovery is not seandroid enforcing" and then the whole screen "System software note authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help". Download mode works, but One sees the connection, but flash wants nothing((( Help please! Possible duplicate topic, but I'm not really good with English, sorry in advance!
takosan4ik said:
Hello everyone! I got the device is SM-N900V, although the firmware is written everywhere that this is a SM-N9005, in the end, I decided to gain root and put custom recovery methods for SM-N9005, but in the end, the phone constantly trying to boot into recovery and says "Recovery is not seandroid enforcing" and then the whole screen "System software note authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help". Download mode works, but One sees the connection, but flash wants nothing((( Help please! Possible duplicate topic, but I'm not really good with English, sorry in advance!
Click to expand...
Click to collapse
No help available. You cannot run other ROMs on the Verizon Note3. The SM-N9005 ROMs will not work.
Sent from my Note 3 via Tapatalk
please please help me
This is the same problem I'm having why n9005 rom not work? can work other roms on this phone?
samiabe said:
This is the same problem I'm having why n9005 rom not work? can work other roms on this phone?
Click to expand...
Click to collapse
As of now....NO
Sent from my Note 3 via Tapatalk
I have been trawling the internet for literally hours.
This is my final hope before I get really desperate with this device.
I bought a Samsung Galaxy Edge+ online as a demo unit so I could use it as a glorified tablet,
since it was a demo unit it had demo software which I tried to remove using the 5444 password
trick on the retail software to no avail. So I decided to root the phone using Odin and the
SM-G928 F/I/C/K/S software as i couldn't find the particular software for this phone anywhere.
This worked but every time I booted the phone it would give me the 'KERNEL IS NOT SEANDROID ENFORCING'
on the top left of the device which I promptly ignored and continued to use the device, I downloaded
root check which said my device was rooted and then I downloaded system app uninstaller to try remove all the trial
software, which unfortunately didn't work. I then attempted a hard reset, which also didn't work and just
rebooted the device, finally i decided to download Flashify and TWRP recovery to try and delete the trial software
from there. At this point I was just messing around with the phone when I noticed a thread that said i needed
titanium backup to fully delete the software, so i rebooted the phone and it has been stuck on the bootup screen
ever since, I have tried several methods to get it to work including re-flashing the software onto it,
(the SM-G928F one I mean) but i simply cannot find the correct one for my device.
Any help would be greatly appreciated :good::good::good::good:
The device is running 5.1.1
I am not sure of the kernel or anything like that as I am quite noobish.
re: phone issues
MeMyPhoneAndI said:
I have been trawling the internet for literally hours.
This is my final hope before I get really desperate with this device.
I bought a Samsung Galaxy Edge+ online as a demo unit so I could use it as a glorified tablet,
since it was a demo unit it had demo software which I tried to remove using the 5444 password
trick on the retail software to no avail. So I decided to root the phone using Odin and the
SM-G928 F/I/C/K/S software as i couldn't find the particular software for this phone anywhere.
This worked but every time I booted the phone it would give me the 'KERNEL IS NOT SEANDROID ENFORCING'
on the top left of the device which I promptly ignored and continued to use the device, I downloaded
root check which said my device was rooted and then I downloaded system app uninstaller to try remove all the trial
software, which unfortunately didn't work. I then attempted a hard reset, which also didn't work and just
rebooted the device, finally i decided to download Flashify and TWRP recovery to try and delete the trial software
from there. At this point I was just messing around with the phone when I noticed a thread that said i needed
titanium backup to fully delete the software, so i rebooted the phone and it has been stuck on the bootup screen
ever since, I have tried several methods to get it to work including re-flashing the software onto it,
(the SM-G928F one I mean) but i simply cannot find the correct one for my device.
Any help would be greatly appreciated :good::good::good::good:
The device is running 5.1.1
I am not sure of the kernel or anything like that as I am quite noobish.
Click to expand...
Click to collapse
First thing to do is to get into STOCK recovery and do a "Factory Data Reset"
or you can boot the phone up and go into "Settings>Backup and Reset" and
select "Factory data reset".
After doing that odin flash the proper S6 Edge+ Lollipop 5.1.1 or the new Marshmallow 6.0 firmware.
You can see the exact model of your G928 phone by going into settings and scroll down to "about"
there you will find the specific model of your phone.
Be sure to ONLY odin flash the correct firmware for your phone's model.
Once you do all the above you will no longer see:
'KERNEL IS NOT SEANDROID ENFORCING'
The only reason you see that is because the phone is rooted.
After odin flashing the proper firmware your phone will no longer be rooted
unless you root the phone again.
Good luck,
Have a great day!
Misterjunky said:
First thing to do is to get into STOCK recovery and do a "Factory Data Reset"
or you can boot the phone up and go into "Settings>Backup and Reset" and
select "Factory data reset".
After doing that odin flash the proper S6 Edge+ Lollipop 5.1.1 or the new Marshmallow 6.0 firmware.
You can see the exact model of your G928 phone by going into settings and scroll down to "about"
there you will find the specific model of your phone.
Be sure to ONLY odin flash the correct firmware for your phone's model.
Once you do all the above you will no longer see:
'KERNEL IS NOT SEANDROID ENFORCING'
The only reason you see that is because the phone is rooted.
After odin flashing the proper firmware your phone will no longer be rooted
unless you root the phone again.
Good luck,
Have a great day!
Click to expand...
Click to collapse
I can't boot the phone up, if I could I would, I can't find the software for this particular model, which is aforementioned SM-G928X,
If you could help me with that, I would appreciate it. The phone is stuck on the Saumsung boot up, it doesn't actually boot up into
the lock screen so I can't do anything with it, if you could help me with link to the SM-G928X firmware that I could use in ODIN
that would be greatly appreciated cause the phone is a paper weight at this point.
I had a moment of madness and decided to do what you said anyway, and I can't factory reset the phone from the recovery menu as it says
its due to security policies or something of that nature, which again I mentioned in the initial thread.
Also to clarify, I can't flash my own firmware because I can't find the firmware anywhere on the internet.
re: firmwares
MeMyPhoneAndI said:
I can't boot the phone up, if I could I would, I can't find the software for this particular model, which is aforementioned SM-G928X,
If you could help me with that, I would appreciate it. The phone is stuck on the Saumsung boot up, it doesn't actually boot up into
the lock screen so I can't do anything with it, if you could help me with link to the SM-G928X firmware that I could use in ODIN
that would be greatly appreciated cause the phone is a paper weight at this point.
I had a moment of madness and decided to do what you said anyway, and I can't factory reset the phone from the recovery menu as it says
its due to security policies or something of that nature, which again I mentioned in the initial thread.
Also to clarify, I can't flash my own firmware because I can't find the firmware anywhere on the internet.
Click to expand...
Click to collapse
I have done a bit of research on your G928X device and I think you are in luck.
Check out this link carefully http://pdadb.net/index.php?m=specs&id=8759&c=samsung_sm-g928x_galaxy_s6_edgeplus_lte-a_samsung_zen
and you will see that the firmware in your phone is identical to many other G928 firmwares as you will see in that link.
Odin flashing any of the ZEN firmwares in that link cannot brick your phone, the worse thing that can happen is that it will not
work. (just like it's not working for you right now).
I would go a head and odin flash the S6 Edge+ G928T firmware which is also the ZEN baseband firmware, there are many S6 Edge+ phones
using the exact same firmware. All Samsung S6 Edge+ firmwares contain the modem but not all of them will be compatible with your
carrier but at least you will be able to boot your phone normally without getting stuck on boot screen or bootlooping to start with.
You can get the G928T firmware from http://sammobile.com OR
https://www.androidfilehost.com/?fid=24499762636004597 (fast download)
Good luck,
Have a great day!
I recently decided to unroot my Galaxy S4 SGH-I337 from AT&T using the methods and the downloads from this website here: http://www.androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html
Now, when I turn my phone on, neither my WiFi or my mobile data will work, and if I try to turn my WiFi on, I get a popup from Security Information that says "This device has detected an application attempting to perform actions that are not permitted. These actions have been blocked.
I've tried pulling out the battery, I've tried turning WiFi power save off from the dialer menu, but neither one has worked. Not to mention my device is so old now it's probably out of warranty. I'm not really sure what to do from here.
The forum for the AT&T s4 i337 is here: http://forum.xda-developers.com/galaxy-s4-att
This may help: http://forum.xda-developers.com/showthread.php?t=2616221
Please don't open duplicate threads in different forums it just clogs up the boards
http://forum.xda-developers.com/galaxy-s4-att/help/wifi-mobile-data-unroot-t3445234
I will close this one and leave the other one open
Regards
Moderation Team
Hi All.
Thank you for any help you might give me in advance with this issue...
Last week, I tried to root the phone with the SM-G930P CF-Autoroot heroqltespr files with Odin found in this forum. I have rooted a few other phones but am no expert. The root after a few attempts failed (verified a few ways), however, some files must have been affected because the phone "identifies" as heroqltespr. Identifies as when I could plug into my PC heroqltespr would be the name. It was not set this way in the obvious name your device areas. I ended up doing a hard reset to clear the phone and other than the ghost naming everything was working fine.
A day or 2 ago Sprint rolled out a new OTA update which the phone installed. Since then the phone was draining battery life. After uninstalling and reinstalling the SD card today, it seems to have tripped a "Security Notice: Unauthorized Actions". That is when the trouble started. The phone started running hot, basically leaking battery power, and was all lagging. I'm assuming the CPU going Ludicrous speed.
Now, I am in a Samsung Splash screen loop, or or a recovery loop. The only thing it does is go into download mode.
I have tried flashing stock firmware, it fails. I've tried flashing with and without the SD or Sim card. Not really sure what I should be doing. The "P" version of my phone seems to be the bastard child of S7s. Any help you guys cold give me would be great. THANK YOU!
The Download Screen Reads:
Odin Mode (High Speed)
Current Binary: Samsung Official
System Status: Custom
FAP Lock: Off
Warranty Void: 8x8
Qualcomm Secure Boot: Enabled
AP SWREV: 85(2,1,1,1,1) K1 S4
I get this error when I try to flash back to stock SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4
Stupid question but is your phone in a case?
Sw rev check fail : [aboot]fused 5 > binary 4
freakboysays said:
Stupid question but is your phone in a case?
Click to expand...
Click to collapse
No it isn't.
I get this error message on the download screen. SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
If you dont mind me asking, did you ever find a way to root the G930P with the 5th bootloader updates? Is it even possible at this point in time? Im new when it comes to rooting but with the amount of time Ive spent browsing the web it seems as if there is nothing. Thanks.
tonysak said:
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
Click to expand...
Click to collapse
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Chanman said:
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Click to expand...
Click to collapse
EDIT: Nevermind...sounds like you aren't on sprint.
lvpre said:
EDIT: Nevermind...sounds like you aren't on sprint.
Click to expand...
Click to collapse
Actually, I am on Sprint, and your directions were awesome, thank you so much! The only thing I had to do was change the line to:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,http://mms.sprintpcs.com,68.28.31.7,80,310,120,,default,dun,mms,supl"
I'm going to put a link to the thread so others can refer to it. https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446
Hi all,
EDIT: I posted this in another thread that was about two years old, where I followed the instructions that caused this: https://forum.xda-developers.com/sp...msung-galaxy-s7-sm-g930p-root-xposed-t3503599
That thread seems dead-ish and if you managed to fix this issue maybe you can help me also. Also what was lvpre's original post before he edited it, and would it apply here?
So the worst has happened - got a new (used) phone from Boost Mobile, tried this guide, and now I can only boot to the "An error has occured while updating the device software. Use the Emergency Recovery function in the Smart Switch PC software." screen. Sometimes it does take me to the original "Download mode" screen.
Now, I should be able to resolve this by flashing the original firmware correct? (As in, the firmware that was installed when it came)? Or does it just need to be firmware from the same date range that has the same bootloader? ODIN will still let me attempt flashing on this screen, but I still get the same error when I try again, which on the Download mode screen showed "SW REV CHECK FAIL : [system]Fused 4 > Binary 1"
Any advice here? My S6 bricked when somehow OEM unlock enabled itself and I can't get around the FRP lock, I will be VERY annoyed if the same thing happens with a NEW phone. If I can't fix this I am never buying Samsung again. Any advice on this is very welcome! I emailed Boost to ask them which firmware is installed (because I'm an idiot and didn't write it down but have never had flashing go this wrong before).
EDIT: Booting to recovery just shows a blue "RECOVERY BOOTING...." for a second in the corner and gives a recovery bootloop, just keeps flashing that.
EDIT: I apparently tried to flash an earlier bootloader/etc through ODIN according to the directions in the post I linked above, and after that I now have this problem. Nobody else in the thread seems to have had this problem, and your post is the closest to anything I can find on this issue. I would be in your eternal debt if you could help me out here.
PLEASE HELP!
EDIT: Theoretically if I can find the original firmware it was on I should be fine, right? Everywhere I read if flashing goes wrong you just flash the original stock on it. I guess worst case scenario I download gigs upon gigs of firmwares for Sprint 930P over the last year and find the one that sticks? Or is the fact my recovery is bootlooping and I can only go into download mode mean I'm bricked?
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
slvmecha said:
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
Click to expand...
Click to collapse
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Switched from Sprint to T-Mobile. Am I out of luck?
lvpre said:
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Click to expand...
Click to collapse
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
jbuck2 said:
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
Click to expand...
Click to collapse
If your phone is uicc [sim] unlocked from sprint... you can try the following.
1. Odin a dec/Jan firmware...like QJ3. But replace the cp slot with the file from the latest u firmware. This is the modem file.
2. When your phone starts, you will receive a pop up message, just hit cancel.
3. Install a package disabler like sabs, bk, adhell2. Disable securitylogagent . This should remove the annoying message. Sabs takes a little effort to setup, but you may need it for the disabler part. Restart after disabling.
4. Pop in sim. See if the additional bands are unlocked.
If you fail, you can always just odin back to a v5 sprint firmware. But don't try it unless you are stuck on the current firmware and your phone is doing nothing. It won't brick your phone.
While the firmware is not downloadable, modem files can downgrade one major update.
This worked for me, but I only have sprint and haven't tried it elsewhere.
Here is an article https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/
Is this triggers the knox counter ?