For who have change their build.prop and stuck on boot loop
And get different model error on lg flash tool
And stuck on 49% in download mode
Here you go
http://forum.xda-developers.com/showthread.php?p=51028233#post51028233
Quote:
Originally Posted by maxkanick
Hi all
My lg g2 is on android 4.4.2 with rooted
I have changed his model name to GT-N7100 on build.prop to download none compatible app for my device
But after I rebooted
it stuck on boot loop and won't boot
I have try to flash lg stock rom by using lgflashtool with tot file but it take me error " different model chack phone or dll "
On my download mod screen it also show me model GT-N7100
An I also flash with lg mobile support tool
But it tell me "u are using a latest software from lg mobile support tool "and start upgrade button is gone
On lg mobile support tool show me the right model name "D802"
When I try upgrade recovery from lg mobile support option it return "no item to upgrade "
Also flash by kdz offline mode it return unknown error " with China txt "
Than I have use adb comment to delete and push build.prop but my devices adb is in offline
Please help me
Can I flash system.img using fastboot comment if I can how to enter fastboot mode on lg g2
Other say me
Press V+ than plug USB to enter to fastboot mode
I have try but on my fast boot comment no fastboot devices delete and my g2 is on download mode screen
Please any help !
Sorry for my English
After 2 day
My problem have been resolved (by me)in this morning
Soo good morning every body
I have got my g2 backed
I will tell u if your problem just like me
To force flash firmware without checking model numbers on your g2
1.do not use kdz file (but we still need it)
2.do not use up testEX
MAIN program we need is Lg flash tool
Just download your right kdz firmware file
Download your right tot firmware file
For model dll do not use dll given with tot file
Just use kdz extractor and extract your dll from your kdz file
Flash it with your tot firmware in lg flash tool
And Good luck
help?
can you explain how to extract the dll file from the kdz??
and does the kdz have to be the same version as the tot file??
Sprint LG G2 KDZ file
maxkanick said:
After 2 day
My problem have been resolved (by me)in this morning
Soo good morning every body
I have got my g2 backed
I will tell u if your problem just like me
To force flash firmware without checking model numbers on your g2
1.do not use kdz file (but we still need it)
2.do not use up testEX
MAIN program we need is Lg flash tool
Just download your right kdz firmware file
Download your right tot firmware file
For model dll do not use dll given with tot file
Just use kdz extractor and extract your dll from your kdz file
Flash it with your tot firmware in lg flash tool
And Good luck
Click to expand...
Click to collapse
Could you point me at the right Sprint LG G2 KDZ file please? I just have the TOT file and it's .dll file
Thank you!
I was dumb and tried to flash a kitkat d802 firmware onto my d801 with a d801 kernel. After leaving recovery I got stuck on a fastboot screen and couldn't get into recovery or download mode. I followed this http://forum.xda-developers.com/showthread.php?t=2681089 , and was able to finally have download mode boot up (shows the phone as b100 instead of d801). I downloaded tot and dll file from here http://downloads.codefi.re/autoprime/LG/LG_G2/D801BK/Stock_Firmware and tried to flash it on my phone. But in the LGFlashTool program it says device model is different, and shows it as a model d802 now. Am I screwed?
I was updating my software of my lg g2 with lg pc suite. Then it all crashed and I am stuck in the "Firmware Update". I already tried recovering it with recovery mode, it didn't do anything. Also tried this http://forum.xda-developers.com/showthread.php?t=2432476. But when i pressed the com41 my pc crashed. Also I couldn't the dll file for my device. Can anyone help me? :crying:
Hi. I am trying to flash kdz firmware on my g6 and when when i press start it reboots the phone to download mode and then gives me this error ((Error: AtCmd TxRx error)
Hello Guys, I have LG G2 F320S (Korean Variant) and a few days ago it was stuck in fastboot mode while i was trying to upgrade to Lollipop firmware using LG Flash Tool 2014. And Fastboot commands were working fine but the problem was that some of the partitions had become write-protected so I was unable to erase or reflash those partitions. So, I short circuit the capacitor and I successfully entered Qualcomm 9006 mode with a number of partitions. I used SRKtool to restore partitions (I have this experience in the past so it was easy for me) but here I noticed 1 or 2 partitions were not restored (write-protected) but phone restarted to download mode. When I tried to flash stock firmware then it always stuck in the middle or something and later once again I was stuck in fastmode mode where I started.
I don't know how partitions became write-protected?
Once again I disassembled the cellphone and short-circuit the capacitor to enter Qualcomm 9006 mode and this time, I wanted to remove write-protection from these partitions so I opened "Diskpart" in "cmd" selected LG G2 and performed clean command and format it. Diskpart removed all the partitions gave me a 32GB single partition like a USB Flash. :laugh:
I thought may be after shorting the capacitor, I will get back partitions but this time I got QDLoader 9008 mode. Now whenever I connect phone to PC with or without battery then it is detected in Qualcomm QDloader 9008 mode.
I tried Boarddiag v3.99c but unfortunately this tool doesn't extract .kdz file of my LG G2 F320S korean variant. I tried to extract .tot file of LG G2 D802 (intl variant) and it completed successfully, so the problem is in .kdz file of my cellphone(probably not supported by this tool).
I can extract this .kdz using LGFirmware extract tool but unfortunately it doesn't create "partition.txt" file which is required in boarddiag to flash partitions. I used partition.txt file of LG G2 D802 but it gives error : No DLoad mode when trying to reflash programmer".
Any help would be appreciated.
#StayHomeStaySafe
Boarddiag full and working version helped
I have tried a lot of times to flash the partitions using boarddiag but it failed. It was the problem of the software because almost all versions had missing files. At last, I have found a working version of boarddiag which detects my phone and I am able to flash boot partitions to it. Although all 3 tests completed successfully (AP, EMMC, SDRAM) but still I am stucked, even after flashing all the boot images, I am still stuck in QDLoader 9008 mode and whenever I connect it to PC (with or without battery), it is detected in QDLoader 9008 mode.
Here is the link to the full working version of Boarddiag 3.99 for LG G2:
https://mega.nz/#!SwY2BQ6L!kPZ6s24hdaVj1x5grboFlAksHSwmItblXIcJCCSaeaw
(mega is blocked in many countries so you may have to use proxy/vpn to open this link)
Here is the result of all 3 tests. Please tell me whats the problem. SDRAM result is FAIL but why so?
https://ibb.co/6ntQwsv
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
salmanzafar said:
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
Click to expand...
Click to collapse
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
rootarded said:
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
Click to expand...
Click to collapse
Dear I have tried two methods. I tried LGUP and LG Flash Tools 2014. But both fails. Unfortunately, no TOT file is available for my LG G2 because its Korean variant (F320S) and it has only .kdz firmwares available.
QDLoader 9008 mode
Now, my phone is not entering download mode. It is displayed as QDLoader 9008 mode when connected to PC. Check the screenshot here : https://ibb.co/yk3VSbS
I have the working version of boarddiag but sometimes it passes all 3 tests and sometimes fails EMMC test ad sometimes SDRAM test is not completed successfully.