Database Users

Nexus 7 wont boot pass google logo after root/unroot

I got a nexus7 a week ago but decided to root the device today just to try apps which require root, i rooted it fine but i decided to unroot and thats where the problem started i cant boot pass the google image, i can get into where you hold down volume and power for so many seconds and team win recovery which says i have no OS in the reboot section, i've tryed nexus 7 toolkit v3.2.0 and nexus root toolkit to restore back to factory system but no luck, so is it me doing something wrong or is my nexus 7 just a paper weight now.

Doubt it,
Being you still have a custom recovery you didn't follow the right steps to unroot, might need to unlock the bootloader again, but follow one of the many guides, and try to stay away from a tool kit
Sent from my HTC Vision using xda premium

Unlock bootloader
Flash boot, recovery, system, userdata.
Files are zipped in the factory images directly from google.
Wipe cache.
Relock bootloader.
Reboot into recovery.
Factory reset. (Nexus 7 will only see 8GB if you don't do this step)
That is the gist of how it's done.

I followed a step by step guide on laptop man website but when i come to flash the android image it says file too large, i used 4.2.1 from googles site, if i'm correct when you type fastboot -w update image-nakasi-jro03d.zip (in the walkthrough) i can replace it with a later newer android in this case 4.2.1 jop40d

You could do it that way. Some people have. Although I received an error every time I did.
I didn't receive an error when I flashed the files in the zip.
First make sure you have the correct factory image for your device downloaded.
Then make sure you extract the boot.img, recovery.img, system.img, and userdata.img files to your fastboot folder and perform the following actions...
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot reboot-bootloader
fastboot oem lock
Lastly, boot your system up into recovery and perform a factory reset from there. If you don't do the last step they you will be stuck with ouly 8GB, vice 16 or 32.
It's that easy.

When i try to boot into recovery mode i get the android mascot with a red triangle, does that mean i have no recovery file.
OOOPS the system booted up into android as the recovery mode didnt work (as above) is there anyway i can reset to factory settings to get the 32GB back as it shows 6GB.
Update: I think i sorted it out now somehow as it shows up as 27.oddGB now (about same as i got it) instead of 6GB, anyway thanks for your help, it seemed complex well it is but once you know whats what it's not so, the hardest part is getting the files and putting them in the right places

When I try to reboot to recovery via the bootloader it just hangs... Can boot to recovery inside android (usually using Rom Manager or another reboot application)... any idea why?

I have read reports that it will hang when booting into recovery if not connected to a PC.
And as for that triangle you see.... That's normal.
That means that your in recovery mode. Your menu is just hidden.
Press power and volume up to view it.

Updating to 4.3 Image with fastboot failed.

Hi guys
I was trying to update to 4.3 using fastboot and after finishing i got stuck with the google on the screen. So i went on to try it again, this time installing each .img in the zip manually. While i was sending the System.img the usb connection broke and i tried again to no avail. So i was like lets do this again. So i went i started all over again with erasing boot, now the terminal is stuck on that and not going forward. Im out of options. Really need help, im helpless here. Please.
Thank You

Cantacid said:
Hi guys
I was trying to update to 4.3 using fastboot and after finishing i got stuck with the google on the screen. So i went on to try it again, this time installing each .img in the zip manually. While i was sending the System.img the usb connection broke and i tried again to no avail. So i was like lets do this again. So i went i started all over again with erasing boot, now the terminal is stuck on that and not going forward. Im out of options. Really need help, im helpless here. Please.
Thank You
Click to expand...
Click to collapse
Is that a Mac? There is another thread with a guy having issues flashing system.img using a Mac. Not sure if he was able to fix it or not. He was able to flash all the other images just not system.img.
For reference from Efrant's thread on flashing image files if your phone hangs during first boot try this:
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2010312
I had the boot issue when I first flashed the images and just formatting the cache fixed it for me. I later had to do a factory reset as the phone was reporting the wrong storage size, 8 GB instead of 16 GB and the reset fixed it.
Here is the other guys Mac thread, not sure it will help you or not.
http://forum.xda-developers.com/showthread.php?t=2377647

kzoodroid said:
Is that a Mac? There is another thread with a guy having issues flashing system.img using a Mac. Not sure if he was able to fix it or not. He was able to flash all the other images just not system.img.
For reference from Efrant's thread on flashing image files if your phone hangs during first boot try this:
Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2010312
I had the boot issue when I first flashed the images and just formatting the cache fixed it for me. I later had to do a factory reset as the phone was reporting the wrong storage size, 8 GB instead of 16 GB and the reset fixed it.
Here is the other guys Mac thread, not sure it will help you or not.
http://forum.xda-developers.com/showthread.php?t=2377647
Click to expand...
Click to collapse
And the thing about cleaning caches is locking and unlocking bootloader does the same. Tried, i cant install recovery and system .img for some reason.
Thank you for the quick reply, seems the like the guy is having the same issue. Will post it there as well.
The issue is to fastboot the system.img

Cantacid said:
And the thing about cleaning caches is locking and unlocking bootloader does the same. Tried, i cant install recovery and system .img for some reason.
Thank you for the quick reply, seems the like the guy is having the same issue. Will post it there as well.
The issue is to fastboot the system.img
Click to expand...
Click to collapse
I see you are in the other thread too but I will post this here also.
According to this thread when using a Mac you don't flash the system or kernel (boot) images.
http://forum.xda-developers.com/showthread.php?t=2377691

kzoodroid said:
I see you are in the other thread too but I will post this here also.
According to this thread when using a Mac you don't flash the system or kernel (boot) images.
http://forum.xda-developers.com/showthread.php?t=2377691
Click to expand...
Click to collapse
Yeah you do. I just did this on my Mac for my Nexus 4 and Nexus 7 last night with absolutely no issues.
The procedure I used is as follows...
1.1) Download the factory image and ensure all .img files are extracted to the "platform-tools" folder
1.2) Boot phone into fastboot mode by powering it down then holding volume down/power at the same time until the fastboot screen appears
2) Plug the phone into the computer via USB cable
3) Open terminal and type: fastboot devices (if it recognizes your phone's serial number you are ready to move forward)
4) Reboot by typing: fastboot reboot-bootloader (I do this just to test the connection but it's not 100% necessary)
5) Flash the bootloader: fastboot flash bootloader /Users/kevin/Desktop/Android/sdk/platform-tools/bootloader.img
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio /Users/kevin/Desktop/Android/sdk/platform-tools/radio.img
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system /Users/kevin/Desktop/Android/sdk/platform-tools/system.img
10) Flash the data partition: fastboot flash userdata /Users/kevin/Desktop/Android/sdk/platform-tools/system.img (Note: this command will wipe your device)
11) Flash the kernel/ramdisk: fastboot flash boot /Users/kevin/Desktop/Android/sdk/platform-tools/boot.img
12) Flash the recovery partition: fastboot flash recovery /Users/kevin/Desktop/Android/sdk/platform-tools/recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== (the second option seems to work better for most people and it's what I used)
14) Reboot: fastboot reboot
After completing step 14 your phone should reboot to the initial setup screen. If you follow those steps vigorously you won't have any issues. If it doesn't work you did something wrong and should start over. If it doesn't work on a second try then I'd re-download the system image from HERE again just to be sure the .img files you are ultimately trying to use aren't corrupt somehow.

sn0warmy said:
Yeah you do. I just did this on my Mac for my Nexus 4 and Nexus 7 last night with absolutely no issues.
The procedure I used is as follows...
1.1) Download the factory image and ensure all .img files are extracted to the "platform-tools" folder
1.2) Boot phone into fastboot mode by powering it down then holding volume down/power at the same time until the fastboot screen appears
2) Plug the phone into the computer via USB cable
3) Open terminal and type: fastboot devices (if it recognizes your phone's serial number you are ready to move forward)
4) Reboot by typing: fastboot reboot-bootloader (I do this just to test the connection but it's not 100% necessary)
5) Flash the bootloader: fastboot flash bootloader /Users/kevin/Desktop/Android/sdk/platform-tools/bootloader.img
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio /Users/kevin/Desktop/Android/sdk/platform-tools/radio.img
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system /Users/kevin/Desktop/Android/sdk/platform-tools/system.img
10) Flash the data partition: fastboot flash userdata /Users/kevin/Desktop/Android/sdk/platform-tools/system.img (Note: this command will wipe your device)
11) Flash the kernel/ramdisk: fastboot flash boot /Users/kevin/Desktop/Android/sdk/platform-tools/boot.img
12) Flash the recovery partition: fastboot flash recovery /Users/kevin/Desktop/Android/sdk/platform-tools/recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== (the second option seems to work better for most people and it's what I used)
14) Reboot: fastboot reboot
After completing step 14 your phone should reboot to the initial setup screen. If you follow those steps vigorously you won't have any issues. If it doesn't work you did something wrong and should start over. If it doesn't work on a second try then I'd re-download the system image from HERE again just to be sure the .img files you are ultimately trying to use aren't corrupt somehow.
Click to expand...
Click to collapse
In the other walk through flash system image and boot image is replaced by "./fastboot update image-occam-jwr66v.zip". This could help those who are having problems flashing the system image file. I've also seen this method used for windows in that all you flash is the bootloader image then the update image and your done.

-w is to clear the userdata, but the problem is its not pushing the system.img on the phone! Tried without -w and yet the same issue! I have restored my previous rom and madea nandroid for 4.2.2 stock! Might go back to that and try updating ota! Can somebody confirm if i have to lock bootloader and lose root to get an update!
I have no clue why the same steps work for 4.2.2 but not 4.3 image files!
Sent from my Nexus 4 using Tapatalk 4 Beta

One thing I don't think anyone has mentioned (which may actually be the core solution to this problem for everyone) is that you need to update your SDK Platform from 17 to 18 and you need to install "Android Support Repository" in order for 4.3 to properly flash. To do this open terminal and paste the path to the "android" executable file found under sdk/tools. My path was:
/Users/kevin/Desktop/Android/sdk/tools/android
After pasting the appropriate path into terminal hit enter. This will open the SDK Manager. Once SDK Manager is open it will ask to update outdated drivers. One of the drivers being updated is SDK Platform. Before hitting the update button scroll down to the 'Extras' folder and check the box next to "Android Support Repository". Now hit the update button.
After doing this, reboot the computer (may or may not be necessary) and try flashing again by following the steps I provided in post #5. Let me know if that solved it.

Well, i may try that! But as if now, went to bootcamp, installed drivers and sideloaded 4.3. I may still try updating sdk, just in case i may neeed to do this again!
Where is this sdk/tools?
Sent from my Nexus 4 using Tapatalk 4 Beta

Cantacid said:
Well, i may try that! But as if now, went to bootcamp, installed drivers and sideloaded 4.3. I may still try updating sdk, just in case i may neeed to do this again!
Where is this sdk/tools?
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
sdk/tools is located wherever you extracted the .zip file to. In my case I just put it all in a parent folder on the desktop called "Android".

Using System Image to Update your Nexus 6 (no data loss)

Tired of waiting for the OTA? Can't use it because you're rooted? Don't want to wipe your entire phone? No problem! Here's how you can upgrade with Google's Nexus factory images without wiping your apps or sdcard.
NOTE: You must have your bootloader unlocked. If you've never unlocked your bootloader, I don't think there's any way to do this without wiping your data.
STEP 1: Install fastboot
Fastboot is Google's utility for flashing factory images. You can also use it to flash custom recoveries like TWRP and CWM. The standard way to get is is through Google's Android SDK, but that's a bit heavy-duty, so you can also download just the most important tools (fastboot and adb) separately, packaged by users. Here are some links:
Official Google Android SDK (cross-platform): http://developer.android.com/sdk/index.html#Other[1]
Unofficial for Windows: http://developer.android.com/sdk/index.html#Other[2]
Unofficial Mac/Linux: http://code.google.com/p/adb-fastboot-install/[3]
Windows users might also need to install drivers: http://developer.android.com/sdk/win-usb.html[4] (can any Windows users confirm whether it's necessary?)
STEP 2: Prepare factory image
Download the latest Nexus 6 factory image at https://developers.google.com/android/nexus/images#shamu[5]
Unzip it and open the resulting folder
Unzip the "image-shamu-*.zip" file in there
You should now be looking at something like this: http://i.imgur.com/mzrfwrP.png [6]
STEP 3: Flash! (Ah-ahhhhh! [7] )
Connect your phone to your computer via USB, and enter the bootloader. You can enter the bootloader by holding down the power and volume-down buttons to boot. Once you see the bootloader, you can release the buttons.
Open a terminal/command prompt. The syntax might be slightly different on Windows than on Mac or Linux, but basically the same. Anything you see in <> you need to replace, e.g. with the actual path to your factory image folder. The rest you should be able to copy and paste. (Tip: you can easily enter a folder path into your terminal/command prompt by simply dragging the folder onto your terminal window. This works on Mac, Windows, and the vast majority of Linux GUIs.) Enter these commands:
cd </path/to/shamu-lmy47d>
fastboot flash bootloader bootloader-shamu-moto-apq8084-71.08.img
Reboot the bootloader.
fastboot flash radio radio-shamu-d4.0-9625-02.95.img
cd <image-shamu-lmy47d>
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash system system.img
If you DO NOT use a custom recovery (like TWRP or CWM), then also: fastboot flash recovery recovery.img
Don't worry if you see messages like "target reported max download size of 1073741824 bytes". Just wait and let it finish.
Reboot your phone and enjoy. It's normal for the first boot to take a while. Going from Kitkat to Lollipop took about 20 minutes. Going from 5.0 to 5.0.1 took 5-10, I think. YMMV.
A WORD OF WARNING: If you're moving between ROMs, you generally should do a complete reset, including wiping data. Many users have reported problems going from KitKat to Lollipop without wiping data and recommend a factory reset anyway. If you're okay with wiping everything, you can simply use Google's included flash-all scripts, or flash the userdata.img file yourself. Personally, I'm not going to bother wiping adta for an incremental update like 5.0.1->5.1. As always, be sure to back up your data!
Shamelessly stolen from: http://www.reddit.com/r/Nexus5/comments/2phqy7/howto_upgrade_android_using_nexus_factory_images/

Shouldn't you also fastboot reboot bootloader after radio flash?

This is the scenic route.

I tried to update using wugz, without unlocking the bootloader. failed. Oh well, I'll wait to receive ota
Unless this method doesnt require unlocking?

If you have an OTA zip file, this is different than using a System Img?
I do not think you need to lose data or unlock your bootloader?
Found a link for the OTA zip file.
If I remember right you can copy the zip to you phone with a USB cable.
Go into the bootloader, Volume Down and Power.
Select the zip.
I did not think you needed a terminal and all the commands if you had the OTA zip on your phones SD card.
Am I wrong does something like this not work?
or
I can just wait.....

This worked great.
I was unbranded with VZ sim, unlocked, rooted with TWRP recovery. Didn't want to lose all that nor my apps or data. This method upgrades to 5.1 without any loss.
When I was done with the flashing, I rebooted to TWRP recovery (not system) in order to wipe dalvik and cache (just to be certain). I wiped and then rebooted to system. TWRP noticed I didn't have SuperSU installed so it installed it for me. Meaning, once I got my system rebooted, I still had root too.
All in all, this process worked great for me. Thanks.

I run the first two commands
fastboot flash bootloader bootloader-shamu-moto-apq8084-71.08.img
fastboot reboot-bootloader
they worked, then i moved to the radio
fastboot flash radio radio-shamu-d4.0-9625-02.95.img
but it failed.
Any idea?
---------- Post added 14th March 2015 at 12:17 AM ---------- Previous post was 13th March 2015 at 11:53 PM ----------
Nikos2k said:
I run the first two commands
fastboot flash bootloader bootloader-shamu-moto-apq8084-71.08.img
fastboot reboot-bootloader
they worked, then i moved to the radio
fastboot flash radio radio-shamu-d4.0-9625-02.95.img
but it failed.
Any idea?
Click to expand...
Click to collapse
This is the message after the radio flash command:
fastboot flash radio radio-shamu-d4.0-9625-02.95.img
target reported max download size of 536870912 bytes
sending 'radio' (85422 KB)...
OKAY [ 2.697s]
writing 'radio'...
(bootloader) flashing modem ...
(bootloader) flashing modem ...**☺
FAILED (unknown status code)
finished. total time: 3.721s​
Why the failed message?

I'm decrypted. Will this re encrypt my Nexus or do I have to flash a non enforce img?

Thank you, this really helped.
Since my bootloader was locked i had to unlock it as well.
Had a bit of a scare with the whole erasing screen staying on for too long.
Went back and redid the process, and went downstairs for 5 minutes, came back and phone was booted.
Anyway, thank you again

Will this work on an encrypted phone?

mikeadamz said:
Tired of waiting for the OTA? Can't use it because you're rooted? Don't want to wipe your entire phone? No problem! Here's how you can upgrade with Google's Nexus factory images without wiping your apps or sdcard.
<<snip>>
Click to expand...
Click to collapse
I don't suggest that anyone read and follow someone else's instructions when doing something like this. Not because the instructions are wrong or anything, but because blindly following instructions doesn't involve *understanding* anything.
So rather than reading and following instructions, read and UNDERSTAND the process of installing factory images as delivered with the factory images (flash-all.sh). If you UNDERSTAND the process and what everything does, then (a) you *already know* what needs to be adjusted to do what you want, and (b) if something starts going wrong in the middle of it, you will understand why, and what to do to correct it.

mikeadamz said:
cd </path/to/shamu-lmy47d>
fastboot flash bootloader bootloader-shamu-moto-apq8084-71.08.img
Click to expand...
Click to collapse
First, thanks for the write up, I do greatly appreciate it. Second, thanks for the tip on dragging file locations into the command prompt. Very helpful.
Now my question. When I did this I tried using exactly the steps above and had no luck whatsoever. I'd cd to the location of the img files as noted and it would say fastboot is unrecognized as an internal or external command. I moved the file into the fastboot location and got the same issue. I finally ran the fastboot from the adb folder location and just referenced the full file path for each img file (using the drag and drop method) and everything went swimmingly. My question is just about using fastboot. Should it have worked when I used cd to go to the img file location? Is there something I need to do to make it work as you described?
Thanks!
Nick

Nick D said:
First, thanks for the write up, I do greatly appreciate it. Second, thanks for the tip on dragging file locations into the command prompt. Very helpful.
Now my question. When I did this I tried using exactly the steps above and had no luck whatsoever. I'd cd to the location of the img files as noted and it would say fastboot is unrecognized as an internal or external command. I moved the file into the fastboot location and got the same issue. I finally ran the fastboot from the adb folder location and just referenced the full file path for each img file (using the drag and drop method) and everything went swimmingly. My question is just about using fastboot. Should it have worked when I used cd to go to the img file location? Is there something I need to do to make it work as you described?
Thanks!
Nick
Click to expand...
Click to collapse
Install this:
http://forum.xda-developers.com/showthread.php?t=2588979
Now ADB and fastboot are installed system wide. Put your files anywhere, I use the desktop. Hold shift and right click on wherever your files are and select "open command prompt here" and flash away. Simplified, no more dragging and dropping.

Will try with the new update (5.1.1 (LMY48M)) to ensure it works. Thanks!

[/COLOR]
handyarrow said:
Will this work on an encrypted phone?
Click to expand...
Click to collapse
Have been flashing this zip in twrp after the fastboot stage without an issue for the last few updates - http://forum.xda-developers.com/nexus-6/development/mod-disable-force-encryption-rom-kernel-t3000788

Flashed LMY48M with fastboot method and it works great.
My phone is encrypted.

[INFO] How to sideload 5.1.1 (LYZ28E), & maintain no encryption - no wipe required

[INFO] How to sideload 5.1.1 (LYZ28E), & maintain no encryption - no wipe required
Simplified procedures with LMY47M / LYZ28E now available as a factory image.
Hopefully this isn't blatantly obvious to everyone, it is a little different than the normal sideload procedure. Thought it might be useful to some who want to load 5.1.1 (and get Wifi calling with T-Mobile!) and not be forced to encrypt.
Requirements:
1. I'm assuming you have adb/fastboot working on your computer / connecting to your device and you understand a little bit about using adb / fastboot with an android phone.
2. Your phone cannot be encrypted, if you're encrypted already - this will not un-encrypt your data - you need to turn off forced encryption and format the "userdata" partition to disable the encryption.
3. You need to have an unlocked bootloader for this to work of course.
How to follow this procedure:
1. If you're on LMY47M (T-Mobile) and unencrypted, you can follow option 2, starting with Step 3 - only a small ~150MB download required.
2. If you're on anything other than LMY47M, you should use option 1 unless you have a desire to flash LMY47M and sideload LYZ28E.
I didn't do much here - except spent a bunch of time writing the procedure.
All Credit for tools / ideas goes to:
- efrant for his explanation of how to get OTA updates to work with TWRP ( http://forum.xda-developers.com/nexus-6/general/nexus-6-ota-help-desk-t2992919/page4 )
- hlxanthus for the NO FORCE ENCRYPT mod ( http://forum.xda-developers.com/nexus-6/development/mod-disable-force-encryption-rom-kernel-t3000788 )
- Q9Nap and mhous33 for the LMY47M factory image ( http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052 )
- bbedward and others for the original disable forced encryption boot.img ( http://forum.xda-developers.com/nexus-6/development/disable-forced-encryption-gain-root-t2946715 )
- TeamWin - the TWRP Developer ( https://twrp.me/ )
——————————————————————————————————
OPTION 1 - Easy Method - Flash the LYZ28E factory image directly:
1. Download hlxanthus's NO FORCE ENCRYPT mod and put it onto your phone so you can flash it later (in /storage/sdcard0) - https://basketbuild.com/filedl/devs...u/misc/NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip
2. Download LYZ28E for Nexus 6 ( https://dl.google.com/dl/android/aosp/shamu-lyz28e-factory-b542b88a.tgz ) and extract the files, there is a zip file you want to extract that too.
Boot to the bootloader ("adb reboot bootloader") and fastboot flash the boot, cache, recovery, radio and system:
Code:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img (OPTIONAL - If you have TWRP or another alternative recovery you can skip this step)
fastboot flash radio radio-shamu-<variable>.img
fastboot flash system system.img
3. Restart the Bootloader, and flash TWRP, found here: ( https://twrp.me/devices/motorolanexus6.html )
Code:
fastboot flash recovery twrp-2.8.6.0-shamu.img
4. Restart the Bootloader again and then go to Recovery (TWRP). Now flash NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip through TWRP, and flash SuperSU if you want root and whatever other zips you want to flash (Xposed, etc)
After flashing the NO FORCE ENCRYPT mod, reboot and you should be running 5.1.1 with all of your data and with your userdata partition intact and unencrypted!
———————————————————————————————————————————————————
OPTION 2 - SIDELOAD Method (Makes sense if you’re already on LMY47M):
1. Download hlxanthus's NO FORCE ENCRYPT mod and put it onto your phone so you can flash it later (in /storage/sdcard0) - https://basketbuild.com/filedl/devs...u/misc/NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip
2. Follow the normal procedure, if you're already on LMY47M you can skip to step 3. Download LMY47M for Nexus 6 ( https://dl.google.com/dl/android/aosp/shamu-lmy47m-factory-5228e84a.tgz ) and extract the files, there is a zip file you want to extract that too.
Boot to the bootloader ("adb reboot bootloader") and fastboot flash the boot, cache, recovery, radio and system:
Code:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash radio radio-shamu-<variable>.img
fastboot flash system system.img
3. Now flash TWRP, found here: ( https://twrp.me/devices/motorolanexus6.html )
Code:
fastboot flash recovery twrp-2.8.6.0-shamu.img
4. Restart the bootloader, and enter recovery mode (TWRP). Once in TWRP, go to Advanced -> ADB Sideload. You may need to unplug/plug in the USB cable to your computer again.
Download my version of LYZ28E from here: https://www.androidfilehost.com/?fid=23991606952609905
Note: I modified this version to work with TWRP, it will not work with the stock recovery (because I modified it, the signature on the file is now invalid). The only thing I changed was I edited the updater-script to remove the release keys check which seems to fail on the stock recovery and doesn't work right with TWRP).
Code:
adb sideload f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
5. After it finishes, do not reboot yet. Go back and I recommend rebooting to recovery again. Now flash NO_FORCE_ENCRYPT_shamu_v1.0-signed.zip through TWRP, and flash SuperSU if you want root and whatever other zips you want to flash (Xposed, etc)
After flashing the NO FORCE ENCRYPT mod, reboot and you should be running 5.1.1 with all of your data and with your userdata partition intact and unencrypted!

why would you think that you have to be encrypted to push anything to recovery??? plus sideload is only one method to do it, the other is adb push. and if you use twrp recovery, you don't need any of those method's, as you can just move files over to twrp via your usb.

simms22 said:
why would you think that you have to be encrypted to push anything to recovery??? plus sideload is only one method to do it, the other is adb push. and if you use twrp recovery, you don't need any of those method's, as you can just move files over to twrp via your usb.
Click to expand...
Click to collapse
Sorry if I gave the impression you need to be encrypted to push to recovery, that wasn't my intent. Where did I give that impression? I can try to fix it in my original post. At no point in this procedure will your phone be encrypted - there will be times that the kernel will have the force encryption option turned ON in the fstab but you never will boot the phone when that is the case (like right after LRX22C is loaded, after LYM47M is sideloaded, and after you flash the stock boot.img for LYM47M - but you are not booting in any of these cases - not before you install a no forced encryption kernel)
adb push requires the phone is booted right? I wasn't able to get adb push to work in recovery.
I also didn't know TWRP allowed you to copy data over to your phone via USB, I know CWM recovery can do it - but that was a feature missing from TWRP - maybe they added it, I didn't check. You can do an adb push with TWRP, but what in my procedure would you change to use the adb push method in TWRP versus whatever I put in there? The only thing I can think of is asking you to put the mod file on the phone in the beginning.

liqice said:
Sorry if I gave the impression you need to be encrypted to push to recovery, that wasn't my intent. Where did I give that impression? I can try to fix it in my original post. At no point in this procedure will your phone be encrypted - there will be times that the kernel will have the force encryption option turned ON in the fstab but you never will boot the phone when that is the case (like right after LRX22C is loaded, after LYM47M is sideloaded, and after you flash the stock boot.img for LYM47M - but you are not booting in any of these cases - not before you install a no forced encryption kernel)
adb push requires the phone is booted right? I wasn't able to get adb push to work in recovery.
I also didn't know TWRP allowed you to copy data over to your phone via USB, I know CWM recovery can do it - but that was a feature missing from TWRP - maybe they added it, I didn't check. You can do an adb push with TWRP, but what in my procedure would you change to use the adb push method in TWRP versus whatever I put in there? The only thing I can think of is asking you to put the mod file on the phone in the beginning.
Click to expand...
Click to collapse
"So I just figured out how to sideload LYZ28E on my Nexus 6 without enabling forced encryption. "
actually adb push is very easy.. boot unto recovery, type adb push filename.zip, then it pushes to your phone and is listed in the main storage filesystem. id say its nearly identical to adb sideload.

simms22 said:
"So I just figured out how to sideload LYZ28E on my Nexus 6 without enabling forced encryption. "
actually adb push is very easy.. boot unto recovery, type adb push filename.zip, then it pushes to your phone and is listed in the main storage filesystem. id say its nearly identical to adb sideload.
Click to expand...
Click to collapse
Sorry maybe that first sentence is poorly worded. What I meant was, I figured out how to get LYZ28E onto my phone and disable the forced encryption on the OS too. The process wasn't as straightforward because the 2nd sideload wouldn't work correctly without booting into the OS first. After that, I couldn't get the LYZ28E image to sideload on stock recovery or TWRP without errors - but I was able to modify the LYZ28E OTA file so it would load with TWRP, and then I was able to load the no encrypt mod and supersu and get the phone working the way I wanted again.
Are you saying it would be easier if I push the zip file to the phone and install using TWRP as a zip file instead of trying to sideload it?

Step 3: "Hold down the Power and Volume Up button (may need to do it a few times) to get to the Recovery menu".
Actually, the correct key combination is: Hold power, then (while holding power button) press and release volume up.
Works first time, every time.

cam30era said:
Step 3: "Hold down the Power and Volume Up button (may need to do it a few times) to get to the Recovery menu".
Actually, the correct key combination is: Hold power, then (while holding power button) press and release volume up.
Works first time, every time.
Click to expand...
Click to collapse
Thanks, updated the original post.

liqice said:
Sorry maybe that first sentence is poorly worded. What I meant was, I figured out how to get LYZ28E onto my phone and disable the forced encryption on the OS too. The process wasn't as straightforward because the 2nd sideload wouldn't work correctly without booting into the OS first. After that, I couldn't get the LYZ28E image to sideload on stock recovery or TWRP without errors - but I was able to modify the LYZ28E OTA file so it would load with TWRP, and then I was able to load the no encrypt mod and supersu and get the phone working the way I wanted again.
Are you saying it would be easier if I push the zip file to the phone and install using TWRP as a zip file instead of trying to sideload it?
Click to expand...
Click to collapse
easier/harder isnt an option here, since any way takes seconds. im just saying there are several options for this, thats all

liqice said:
Code:
fastboot flash f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
Click to expand...
Click to collapse
Shouldn't this step be
Code:
adb sideload f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
instead of fastboot flash?

So if your starting out with 47E, your rooted and have TWRP ..... would you use adb sideload in TWRP or you issue the command from the PC?

Chahk said:
Shouldn't this step be
Code:
adb sideload f69096766706fab3c721163f02aad9073a989d00.unsigned-shamu-LYZ28E-from-LMY47M-fullradio-fix-superblock-use-TWRP.zip
instead of fastboot flash?
Click to expand...
Click to collapse
Oops, you're right. Thanks!

Gage_Hero said:
So if your starting out with 47E, your rooted and have TWRP ..... would you use adb sideload in TWRP or you issue the command from the PC?
Click to expand...
Click to collapse
This is where I was, LMY47E, rooted, unencrypted and with TWRP. I followed the entire procedure - went back to LRX22C using fastboot, then sideloaded LMY47M (T-Mobile version) - then flashed the no force encrypt boot.img - booted, after it finished booting, rebooted to the bootloader and so on ...
When you go to LRX22C you flash back to the stock recovery. So you need to boot into the stock recovery, pick "apply update from adb" and then run the adb sideload command from the PC.

Cheers for this.. just what I was looking for. I'm at work so I only scanned this quickly, but any major change in the directions from what you've posted going from an unencrypted LMY47D?

With the factory images being posted, I just did the following:
Flashed the factory images
While still in bootloader, flashed TWRP
Rebooted into TWRP
Pushed SuperSU and the No_Force_encrypt to the /sdcard/ partition
Installed via TWRP
Profit.

lamenting said:
Cheers for this.. just what I was looking for. I'm at work so I only scanned this quickly, but any major change in the directions from what you've posted going from an unencrypted LMY47D?
Click to expand...
Click to collapse
For LMY47D you need to get to LMY47M first, so you would follow the entire procedure, downgrade to LRX22C and then sideload LMY47M and so on.

Heavily updated the procedure since LMY47M and LYZ28E factory images are now available directly from Google.
Should be a lot easier and more straight forward now!

I just recently have this Nexus 6 and came from an LG G2. I went through the process of unlocking the phone and installing rooted LMY47D which meant 2 factory resets in a short period.
I'm now on 5.1 and would like to get rid of the memory leak which this build apparently has.
The title mentions "maintain no encryption".
I never found the time to find out about Lollipop. The title implies that encryption is mandatory on 5.1.1
Is this so?
I merely want the latest upgrade to 5.1.1 and don't want to enforce encryption on my data (Google already knows everything about me) is this the way to achieve this?
I am correct in thinking that I will not get an OTA offered anymore?

Boot loader and radio only...
So if I understand the instructions correctly, if you are still encrypted but rooted, from any Lollipop installation, fast boot flash the factory images... then flash TWRP ... root and done right? Then I have another question... the kernel I am running EX 1.07 along with Flar's app is running perfect for me.... any dangers in just flashing the boot loader and radio? I would like to wait on the system part until the kernel has been updated.....
Also, if I needed to do a restore, if I only flash the boot loader and radio have I pooched being able to go backwards to a nand backup?

FYI, step 3 in option one should read:
fastboot flash recovery twrp-2.8.6.0-shamu.img
vs
fastboot flash twrp-2.8.6.0-shamu.img

frater said:
I just recently have this Nexus 6 and came from an LG G2. I went through the process of unlocking the phone and installing rooted LMY47D which meant 2 factory resets in a short period.
I'm now on 5.1 and would like to get rid of the memory leak which this build apparently has.
The title mentions "maintain no encryption".
I never found the time to find out about Lollipop. The title implies that encryption is mandatory on 5.1.1
Is this so?
I merely want the latest upgrade to 5.1.1 and don't want to enforce encryption on my data (Google already knows everything about me) is this the way to achieve this?
I am correct in thinking that I will not get an OTA offered anymore?
Click to expand...
Click to collapse
Starting with Android Lollipop (5.0) and newer - at least on the Nexus 6 - encryption is turned on by default for the userdata partition.
You would - if you wanted to - backup all of the data on your userdata partition (e.g. Any pictures you've taken with the phone, etc - all of the data basically that shows up when you plug your phone into your computer).
Then you need to be running an OS that doesn't force encryption (for example if you follow my instructions) - this would also get you running 5.1.1.
After that you need to format your userdata - it wouldn't be encrypted at that point, and then copy your data back if you want to.
If you don't care about encryption, you can simply flash the factory 5.1.1 image following my instructions and skip the TWRP parts.

[Guide] Flash 6.0, root, and no-forceencrypt from stock (easy method)

Hope this helps.
1. Install android sdk and use the included install manager in the sdk to install the latest google usb drivers and platform tools (platform tools include fastboot and adb). Make sure adb and fastboot directory is in your Path variable as well.
2.Download latest stock image for Nexus 9 from google: https://developers.google.com/android/nexus/images?hl=en
3.Download latest twrp (here is the latest right now 10/6/2015): http://forum.xda-developers.com/nex...recovery-twrp-2-8-2-0-touch-recovery-t2944788
4.Download either a stock boot image with the no- forceencrypt flag set or a kernel with the no-forceencrypt flag set
a.I use the elementalx kernel (10/6/2015): http://forum.xda-developers.com/nexus-9/orig-development/kernel-elementalx-n9-0-02-alpha-t2931657
b.A stock kernel for the MRA58K build with the no-forceencrypt flag set can be found here (boot.zip): http://forum.xda-developers.com/nexus-9/general/marshmallow-factory-images-available-t3218290/page3
5.Download the latest supersu that works with nexus (beta now) : http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
6.Make sure you have usb debugging enabled and ability to unlock bootloader (android developer options menu on nexus).
7.Unzip the 6.0 stock image into a folder and open a command window in the folder.
8.Type the following:
a.adb reboot bootloader, wait until nexus boots into bootloader
b.fastboot oem unlock
c.flash-all, now wait a few minutes while the stock image flashes
9.At this point your nexus will reboot. Once you’re started, up you need to again enable usb debugging and the ability to unlock your bootloader in the android developer options menu. Now type the following to flash TWRP:
a.adb reboot bootloader, wait until nexus boots into bootloader
b.fastboot flash recovery twrp.img (or whatever the image filename is from the twrp download).
10.Important: now make sure you boot DIRECTLY into TWRP via the button combination (power and volume down), a fastboot command, or the fastboot menu. If you don’t TWRP will be deleted and you’ll need to reflash using the last step.
11.Once in TWRP, hit “cancel” when asked for the password and then erase/wipe data and make sure MTP is enabled (dig around the menus in TWRP, it’s all in there somewhere). This erases the encrypted partition and allows you to use adb to push files to your sdcard.
12.Now type adb push supersufile.zip /sdcard/supersufile.zip, make sure you’re typing from the correct directory.
13.Install supersu via the install menu on TWRP.
14.You now need to install a kernel with the no-forceencrypt flag set:
a.If you want to install a custom kernel (like elementalx), type adb push elementalxfile.zip /sdcard/elementalxfile.zip, make sure you’re typing from the correct directory. Then use TWRP to install the zip from your sdcard.
b.If you want to install the modified stock boot.img then unzip the boot.zip, boot back into the bootloader and type: fastboot flash boot boot.img. Make sure you do NOT boot back into the android OS before doing this step or you'll have to reflash twrp.
Reboot and you’re good to go.

Didnt work for me.

Flash-all script doesn't work for everyone use these steps:
Code:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot –w
fastboot flash boot boot.img [unencypted if wanted]
fastboot flash cache cache.img
fastboot flash recovery recovery.img [twrp usually]
fastboot flash system system.img
fastboot flash vendor vendor.img

typo
excellent guide, just a small typo on 9.b, "fastboot (not flashboot) flash recovery twrp.img"
Thank you

Fda979 said:
excellent guide, just a small typo on 9.b, "fastboot (not flashboot) flash recovery twrp.img"
Thank you
Click to expand...
Click to collapse
Fixed. Thanks.
Sent from my Nexus 9 using Tapatalk

You can't just flash latest stable SuperSU, you need SuperSU 2.50+ beta and a modified boot.img. Instructions here: http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344

- sYndrome - said:
You can't just flash latest stable SuperSU, you need SuperSU 2.50+ beta and a modified boot.img. Instructions here: http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
Click to expand...
Click to collapse
I flashed the latest supersu and the latest elementalx kernel.... been running it since about an hour after elementalx kernel for 6.0 final was posted....... everything seems to be working fine. Are you sure? Maybe i'm having no problems with supersu because i'm using elementalx? let me know the reason, i'll check it out on my tablet and see if i can reproduce, and if so i'll modify the guide. But after about a day and a half use, i've had no issues. thx for quality checking.
gt

Am I missing something?
can I not just do a wipe and flash the img with twrp like a custom rom? Edit: Got it working. For me it was much easier to use this as opposed to the android sdk, because it would not detect my version of java. From there I followed your instructions, mostly. Putting the files you posted inside the directory the mini adb client allowed the flash-all command to work. From there I followed chainfire's instructions on the latest SU. Everything seems to be running smoothly. Thanks for the initiative, OP :good:

i used supersu 2.52 due to it seems be be required by the guides and i get the notification that the binary needs to be updated. i have not done that yet. is updating the binary something i should try to do? or, if not is it ok to turn off notifications from supersu? thanks.

dkryder said:
i used supersu 2.52 due to it seems be be required by the guides and i get the notification that the binary needs to be updated. i have not done that yet. is updating the binary something i should try to do? or, if not is it ok to turn off notifications from supersu? thanks.
Click to expand...
Click to collapse
Of course update binaries. Choose normal method.

Verttex said:
Flash-all script doesn't work for everyone use these steps:
Code:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot –w
fastboot flash boot boot.img [unencypted if wanted]
fastboot flash cache cache.img
fastboot flash recovery recovery.img [twrp usually]
fastboot flash system system.img
fastboot flash vendor vendor.img
Click to expand...
Click to collapse
I was facing same issue, then updated fastboot(android-sdk) and flash-all script worked fine for me.

That should work as well. That sequence of commands should work with any fastboot version. Just make sure to flash the vendor.img, some scripts don't use that as it's only used for the Nexus 9.

Why so complicated? I just installed @wug's NRT toolkit(on a Venue8 pro) and it did everything for me. Now im on rooted stock 6.0 with disabled encryption. Only thing i needed to do is to flash latest super su beta 2.52, that's it.

Verttex said:
Flash-all script doesn't work for everyone use these steps:
Code:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot –w
fastboot flash boot boot.img [unencypted if wanted]
fastboot flash cache cache.img
fastboot flash recovery recovery.img [twrp usually]
fastboot flash system system.img
fastboot flash vendor vendor.img
Click to expand...
Click to collapse
i did all this, no worries and no error messages
i did fastboot reboot
now I am in a weird loop of
- google screen
- your device is corrupt
- google screen
- twrp (it flashes quite quickly, error messages on mounting everything and last line says something about renaming and something about stock rom)
loop
any ideas ?

Did you make sure to flash vendor.img?
You might try flashing the regular recovery first and then boot in, turn on oem unlock and adb, and then flash twrp and modified boot.img, then reboot into twrp (don't boot normally or it will erase twrp) and flash SuperSU.

Verttex said:
Did you make sure to flash vendor.img?
You might try flashing the regular recovery first and then boot in, turn on oem unlock and adb, and then flash twrp and modified boot.img, then reboot into twrp (don't boot normally or it will erase twrp) and flash SuperSU.
Click to expand...
Click to collapse
yes, that seems to have been it
flashing TWRP seems to have been the problem so I have left everything as stock until root etc works on the stovk kernel
thanks for your help

Nice guide.

I install Busybox from Play, I assume that's needed? Everyone else doing this?

- sYndrome - said:
You can't just flash latest stable SuperSU, you need SuperSU 2.50+ beta and a modified boot.img. Instructions here: http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
Click to expand...
Click to collapse
added link to the latest beta supersu. thx.

All of these steps worked for me, but my battery doesn't charge right I don't think. It says battery life is at 3,745%. It runs out somewhere around 3,000%. Any ideas on how to fix that?