Hi
My Phone is S3 Neo (i9300i). I Insalled Original Rom 4.4.4 kitkat on it. But after Upgrade Rom I could not access to Recovery Mode {by Guidelines exist on your site}.
I tried flash TWRP recovery By Odin But My phone Stope in Downloading mode on boot long time. Inevitably I reset it and satartup my android 4.4.4 . Then i I decided to factory reset device . But my phone stoped in Downloading mode and can't to startup.
PLEASE HELP :crying: :crying: :crying:
nasrollah6 said:
Hi
My Phone is S3 Neo (i9300i). I Insalled Original Rom 4.4.4 kitkat on it. But after Upgrade Rom I could not access to Recovery Mode {by Guidelines exist on your site}.
I tried flash TWRP recovery By Odin But My phone Stope in Downloading mode on boot long time. Inevitably I reset it and satartup my android 4.4.4 . Then i I decided to factory reset device . But my phone stoped in Downloading mode and can't to startup.
PLEASE HELP :crying: :crying: :crying:
Click to expand...
Click to collapse
Is the phone showing up in odin? Try reflashing rom.
Did you download the stock from SamMobile?
Ransomium said:
Did you download the stock from SamMobile?
Click to expand...
Click to collapse
Yes, i downloaded it from sam mobile
Hi, I could startup my phone by "CWM_6.0.4.7_Touch_GT-I9300.tar" in odin. But Still i can not go to the Recovry mode.
Does anyone knows How do install .ZIP file ROM whitout Recovery Mode?
hi
Now my problem fixed. I did it according to follow adress:
http://forum.xda-developers.com/galaxy-s3-neo/development/root-samsung-galaxy-s3-neo-t2907189 :laugh::laugh::laugh::laugh::laugh:
1. boot in download mode
2. Install original image in odin
3. Wait :laugh:
http://forum.xda-developers.com/galaxy-s3-neo/general/boot-repair-gt-i9301i-t2917788
Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.
born_high said:
Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules
bryanfeanor said:
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules
Click to expand...
Click to collapse
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
Hey
You are only flashing a kernel...not a full 4.4.2 original image.
And that's why you're stock on the boot logo.
Regards.
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
For the complete image, you can get from here:
http://samsung-updates.com/device/?id=GT-I9506
or here:
http://www.sammobile.com/firmwares/database/GT-I9506/
born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.
bryanfeanor said:
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.
Click to expand...
Click to collapse
Thank you for the reply
I will give it a try and let you know the results.
One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :
born_high said:
One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :
Click to expand...
Click to collapse
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.
bryanfeanor said:
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.
Click to expand...
Click to collapse
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.
Anyway i flashed the full image with odin..(taken from your link).
And back to touchwiz again.
Thanks a lot.
One more thing is, it changed my baseband version a bit.
Build number : I9506XXUCNJ1
bASEBAND vERSION : I9506XXUCNF3
IS THAT A PROBLEM ?
BEST REGARDS.
born_high said:
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.
Click to expand...
Click to collapse
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,
bryanfeanor said:
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,
Click to expand...
Click to collapse
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6
Flash your Favorite Custom Recovery with Odin 3.xx and put it to AP. Check that Auto Reboot isn't marked. After successful flashing your Phone won't to reboot. USB Cable out and put your Battery out and wait few seconds. Put your Battery in and reboot it to Recovery. The Stock Recovery can't now overwrite the Custom Recovery.
born_high said:
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6
Click to expand...
Click to collapse
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.
bryanfeanor said:
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.
Click to expand...
Click to collapse
You are a life saver man, you know that .
I will give it a shot and let you know the results.
Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding
born_high said:
Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding
Click to expand...
Click to collapse
You´re welcome, we all were noobs, and in somethings we still are, thats the best part of this, something new comes everytday so much to learn and do.
hi i have a g900f (s5) i have been rooting phones for years using odin but for some reason every time i try i get recovery is not seandroid enforcing i have tried older version of odin 1.85 ect but nothing seems to work please can somone help me i really want to put a custom rom on this phone
im using the CF root for the g900f too (CF-Auto-Root-klte-kltexx-smg900f.tar)
only way i can get it back on is to flash philz_touch_6.26.6-klte.tar
i have also downgraded the phone to kitkat 4.4.2 thinking that i could use towelroot after but it failed
Follow the below steps
1) Flash TWRP
2) Download SuperSU zip file
3) Boot to TWRP recovery
4) Flash SuperSU zip
you are rooted
stuartdb said:
hi i have a g900f (s5) i have been rooting phones for years using odin but for some reason every time i try i get recovery is not seandroid enforcing i have tried older version of odin 1.85 ect but nothing seems to work please can somone help me i really want to put a custom rom on this phone
im using the CF root for the g900f too (CF-Auto-Root-klte-kltexx-smg900f.tar)
only way i can get it back on is to flash philz_touch_6.26.6-klte.tar
i have also downgraded the phone to kitkat 4.4.2 thinking that i could use towelroot after but it failed
Click to expand...
Click to collapse
androidtweaker1 said:
Follow the below steps
1) Flash TWRP
2) Download SuperSU zip file
3) Boot to TWRP recovery
4) Flash SuperSU zip
you are rooted
Click to expand...
Click to collapse
i flashed CF-Auto-Root-klte-kltexx-smg900f.tar again took battery out booted into download mode again and flashed TWRP after and it work im a happy man thank for your help
Great :good::highfive:
stuartdb said:
i flashed CF-Auto-Root-klte-kltexx-smg900f.tar again took battery out booted into download mode again and flashed TWRP after and it work im a happy man thank for your help
Click to expand...
Click to collapse
Please need all your help for my problem
my G531H stuck at boot screen ("Samsung Galaxy Grand Prime Powered By Android")
I have flash it via odin with different Firmware/Odin and different pc even different usb cable but it's still not worked
i try to get into recovery mode but it can not pass the bootscreen
i try flash a cwm/twrp via odin but what i get is "recovery not seandroid enforcing"
Is there any solution from you guys, any help will be appreciated
here is the screenshot
Try to install kitkat 4.4.x wait if it works go to the settings -> about phone->quickly tap 7 times on Build number and go to developer options and enable usb debug, then flash LL 5.1.1 firmware.
If after flashing kitkat it still don't boots. Go to recovery if it works and wipe everything what u can wipe in stock recovery after it go to download mode and install LL 5.1.1
If recovery don't works just flash LL 5.1.1 after Kitkat.
And stop doin' everything which u don't know and don't understand. If u don't know how to do just ask a guide bro in this forum everyone will help you.
Sorry for bad english.
JamsheeeD said:
Try to install kitkat 4.4.x wait if it works go to the settings -> about phone->quickly tap 7 times on Build number and go to developer options and enable usb debug, then flash LL 5.1.1 firmware.
If after flashing kitkat it still don't boots. Go to recovery if it works and wipe everything what u can wipe in stock recovery after it go to download mode and install LL 5.1.1
If recovery don't works just flash LL 5.1.1 after Kitkat.
And stop doin' everything which u don't know and don't understand. If u don't know how to do just ask a guide bro in this forum everyone will help you.
Sorry for bad english.
Click to expand...
Click to collapse
Thanks for your answer mate
I think the problem is when i flash firmware via odin i checked the "Nand erase all" (My Bad, shouldn't do it)
Is there any solution for this, i read in some forum a pit file need to flash after doing "nand erase all"
pandiliverpool said:
Thanks for your answer mate
I think the problem is when i flash firmware via odin i checked the "Nand erase all" (My Bad, shouldn't do it)
Is there any solution for this, i read in some forum a pit file need to flash after doing "nand erase all"
Click to expand...
Click to collapse
The Pit file is flash together with the ROM not after ?
Do you have any error ehen flashing with odin ?
ciel phantomhive said:
The Pit file is flash together with the ROM not after ?
Do you have any error ehen flashing with odin ?
Click to expand...
Click to collapse
I have found the solution guyz
I just flash it with a full set 4files firmware (That contain CSC, PIT, PDA, BL) and it worked flawlessly
https://www.androidfilehost.com/?fid=24340319927533613
Thanks for your solution mate, hope it will help anyone who have same problem
Please help !!
I tried to edit the bootlogo and flashed it. Now my phn doesnt boot. No recovery not working too.. Only downoadinhg mode working.
Please help me
vishnuthalikulam said:
Please help !!
I tried to edit the bootlogo and flashed it. Now my phn doesnt boot. No recovery not working too.. Only downoadinhg mode working.
Please help me
Click to expand...
Click to collapse
Download Repair Firmware and flash it via odin.
It works.
If that fails get marshmallow or nougat stock and go into download mode. Flash it with Odin. You will be back at stock and have to redo root and recovery.
vishnuthalikulam said:
Please help !!
I tried to edit the bootlogo and flashed it. Now my phn doesnt boot. No recovery not working too.. Only downoadinhg mode working.
Please help me
Click to expand...
Click to collapse
This reminds me of my PSP 3004 I broke it the same way trying to change the bootanimation, but sadly it doesn't have Odin mode so is still stuck in my drawer... Next time make a full nandroid backup before trying it, then you can flash stock rom via odin, flash twrp via odin and restore your settings from before.