Related
Hi
please advice shortly if i'm correct
device LT15i. unlocked BL, updated from 2.3.4 (0.62) to 4.0.4 (.587), then kernel downgraded to 4.0.3, then rooted and updated to the last .587
what i want now:
i prefer to get CM10 or MIUI v4 or any other custom rom, but i can not ___as i can not get CMW installed___
(x parts does not install even it says OK, custom rom app does not override x-parts mess it did and refuses install cwm 3.x.x.x on to unsuscessful 5.x.x.x., I can not find stand alone recovery.img for ARC etc... )
please advice if i should look for CWM installled somehow!!! (HOW?)
or should I
1: install Doom kernel, which suppose to be with CWM and then proceed to any other rom through CWM right after that kernel?
or
2: wipe totally to official SEUS ROM no root... and start over again as i did already?
sorry if i got lost somewhere here (and could not find my answer in other topics)
i'd appreciate your replies.
thx
Download cm, extract only boot.img from it other leave untouch.
Fastboot kernel on phone, it will have cwm, (put rom on sd card before fastbooting) and then in cwm flash rom and gapps (finf by your self and put on sd card before fastboot)
Sent from my LT26i
Hello every one
After i try the new Android v4.2.1 rom by randomblame i want to get back to v4.1.2 but i did not format data this is what i think that brick my A500
So i recovered my device via EUUs_SBK_Acer_A500_1.016.05_COM_GEN1
but after that i couldn't flash any ics rom or ics bootloader
every time i try to flash ics bootloader with "blackthund3r_A500_APX_Flash_Tool_v0."@ the device stock during the process and stock in apx mod so i have to recover it again and so on
i have try : BabSector to format partition and try Afterota after th euus recovery but without luck
i can't even flash ics on hc bootloader "lightspeed 4.8"
now i'm running hc 3.2.1 rom by civato
what i'm doing wrong ? Help Please
I'm really missing CM10
bad English ....sorry
haytham-88 said:
Hello every one
After i try the new Android v4.2.1 rom by randomblame i want to get back to v4.1.2 but i did not format data this is what i think that brick my A500
So i recovered my device via EUUs_SBK_Acer_A500_1.016.05_COM_GEN1
Click to expand...
Click to collapse
So you can boot into the OS OK??
Did you root it?
You may have to take an OTA or update.zip to 3.1 first and flash the v8 from that as I'm unsure it will work from 3.0.1
but after that i couldn't flash any ics rom or ics bootloader
every time i try to flash ics bootloader with "blackthund3r_A500_APX_Flash_Tool_v0."@ the device stock during the process and stock in apx mod so i have to recover it again and so on
Click to expand...
Click to collapse
is their an "apx device" listed in hardware and printers or in your pc system tray?
do you get "acer apx mode" displayed on your tab?
now i'm running hc 3.2.1 rom by civato
Click to expand...
Click to collapse
go to the root guide in my sig and Make absolutely certain you do the first 4 steps in that guide.
d/l the latest apx Flash manager tool v 1.0.2 and use the bundle market in it to install bundle #17
OR
use civato's nvflash package instead as this requires your tab to be in apx mode (black screen/pwr lite on) to work AND will give you a more specific error if it fails.
Once the flash is complete BOOT STRAIGHT TO CWM and flash your cm10.1 rom
THEN Do a factory/data reset and enable wipe of /data/ media (in mounts/storage menu) wipe cache and dalvik cache too. Reboot to cm 10.1!!!
Please do all the steps in the order they are given -
If "it doesn't work" we will need you to tell us what is or isn't happening and where in the process it fails!!!
Good luck
Thank you for reply
dibb_nz said:
So you can boot into the OS OK??
Did you root it?
You may have to take an OTA or update.zip to 3.1 first and flash the v8 from that as I'm unsure it will work from 3.0.1
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Yes I can
It's rooted because it is a custom ROM with CWM Recovery 1.3.4 by Thor
Is it OK to flash the ICS Bootloader from HC 3.2.1 "Civato-FLEXSTRIKER-HC.3.2.1 R6-BASE"?
is their an "apx device" listed in hardware and printers or in your pc system tray?
do you get "acer apx mode" displayed on your tab?
Click to expand...
Click to collapse
Yes their is an "apx device"
and my tab shows "entering apx mode..." or something like that ! with ACER logo
go to the root guide in my sig and Make absolutely certain you do the first 4 steps in that guide.
d/l the latest apx Flash manager tool v 1.0.2 and use the bundle market in it to install bundle #17
OR
use civato's nvflash package instead as this requires your tab to be in apx mode (black screen/pwr lite on) to work AND will give you a more specific error if it fails.
Once the flash is complete BOOT STRAIGHT TO CWM and flash your cm10.1 rom
THEN Do a factory/data reset and enable wipe of /data/ media (in mounts/storage menu) wipe cache and dalvik cache too. Reboot to cm 10.1!!!
Please do all the steps in the order they are given -
If "it doesn't work" we will need you to tell us what is or isn't happening and where in the process it fails!!!
Good luck
Click to expand...
Click to collapse
"USB drivers from the Android SDK" on step 1 maybe that is what I need
So I'll give it a try and tell you what happens.
And again thank you for your help.
Well..
I followed your root guide and used Civato's nvflash package, lots of things happened.
file no 1 is the first result
then file no 2 , here is where I get stuck in apx mode again !!
errors i get :
error formating partition 4
error formating partition 6
The thing is, not every time I try to recover my tab it works
I succeed only once of every 15 tries to recover my tab.
so maybe some partitions are messed up or something.
One time, I tried to flash Civato's nvflash package again , and after few times the bootloader was flashed correctly, but the recovery wasn't !!
So, I tried to use fastboot to flash the recovery ... and it went O.K
After that, I restarted to recovery, formated data (factory reset) , cache , delvik cash, flashed the rom, rebooted the tab ...... but nothing happened !!
and i'm stuck here
I've done lots of searching around the forums and most of them recommend BabSector or tdv4_rollback_rom or EUUs .
only EUUs are working, and even that would work one time of around 10 to 20 tries.
do i have to flash the primery kernel via fastboot , and if so, how to get the kernel from the rom?
thanks in advance
haytham-88 said:
Well..
I followed your root guide and used Civato's nvflash package, lots of things happened.
file no 1 is the first result
then file no 2 , here is where I get stuck in apx mode again !!
errors i get :
error formating partition 4
error formating partition 6
The thing is, not every time I try to recover my tab it works
I succeed only once of every 15 tries to recover my tab.
so maybe some partitions are messed up or something.
One time, I tried to flash Civato's nvflash package again , and after few times the bootloader was flashed correctly, but the recovery wasn't !!
So, I tried to use fastboot to flash the recovery ... and it went O.K
After that, I restarted to recovery, formated data (factory reset) , cache , delvik cash, flashed the rom, rebooted the tab ...... but nothing happened !!
Click to expand...
Click to collapse
Boot to fastboot mode
Fastboot erase userdata, cache, system and flexrom - use separate command for each partition, note any write errors and post back.
Fire up apxflash tool....you MUST dump, save then use your tabs BCT when u get to that window - this should repair the bct error shown in the 2nd text file.
Also tick "show nvflash commands " this will show any read/write or partition errors..
If you get partition errors run babsector (d/l in the root guide) and follow the steps I posted there.
Boot directly to recovery and try flashing a rom again
I've done lots of searching around the forums and most of them recommend BabSector or tdv4_rollback_rom or EUUs .
only EUUs are working, and even that would work one time of around 10 to 20 tries.
do i have to flash the primery kernel via fastboot , and if so, how to get the kernel from the rom?
thanks in advance
Click to expand...
Click to collapse
No u shouldn't have to flash a kernel its included in the rom.
A full and complete erase is required first
(If there are errors here like can't read/write or bad data....your tab is toast) if not,
The bct error must be repaired next, else your tab won't flash any rom at all, even if the tool says PASS
Then reset your partitions with babsector.far
(Any errors like those listed above....your tab is toast)
With all the errors you're having its pointing to a faulty chip, flashing should not be this problematic.
Be sure to follow the direct order of repair....otherwise you'll be compounding errors
Sent from my A500 using Tapatalk 2
Sorry for my late reply
I didn't run apxflash tool I have try something before that I have flash a HC rom over the ICS bootloder "it is wrong I know" but it went OK and the tab boot to the rom!!!!!!!!!
So now I have ICS bootloader with HC rom. what is going on ??
I have a new long work "13 hour" and I can't spend alot of time with my tab but I want to understand what is wrong with my tab
I'm really thankful for your time.
haytham-88 said:
Sorry for my late reply
I didn't run apxflash tool I have try something before that I have flash a HC rom over the ICS bootloder "it is wrong I know" but it went OK and the tab boot to the rom!!!!!!!!!
So now I have ICS bootloader with HC rom. what is going on ??
I have a new long work "13 hour" and I can't spend alot of time with my tab but I want to understand what is wrong with my tab
I'm really thankful for your time.
Click to expand...
Click to collapse
Well, thats different!!!
Are you running stock HC or is it a custom one?
Which recovery are you using?
Download Acer Recovery Installer from the market, it will tell you your bootloader version. You will need root priveleges to run this
dibb_nz said:
Well, thats different!!!
Are you running stock HC or is it a custom one?
Click to expand...
Click to collapse
A custom rom, Civato-flexstriker-hc.3.2.1 r6
Which recovery are you using?
Click to expand...
Click to collapse
CWM Recovery v5.5.0.x(thor2002ro/digetx rev1.7.3)
Download Acer Recovery Installer from the market, it will tell you your bootloader version. You will need root priveleges to run this
Click to expand...
Click to collapse
Bootloader Version: 0.03.14-MUL
and i can acsses Skrilax_CZ's bootloader V8 bootmenu Mode and all of it's functions
i think that i did not understand the bootloader thing yet!!!
haytham-88 said:
A custom rom, Civato-flexstriker-hc.3.2.1 r6
CWM Recovery v5.5.0.x(thor2002ro/digetx rev1.7.3)
Bootloader Version: 0.03.14-MUL
and i can acsses Skrilax_CZ's bootloader V8 bootmenu Mode and all of it's functions
i think that i did not understand the bootloader thing yet!!!
Click to expand...
Click to collapse
ok lets start with the bootloader and why we need it...
On most android devices your first step to flashing a custom rom is to root so you can flash a custom recovery....
With our Acer Tabs since HC 3.2 the bootloader is locked...meaning even having root access did not give us the ability to 'flash' a custom recovery - its just not possible....the only way to do it is with the "patched" bootloader - I don't know how the magic works, but the devs managed to find a way to 'trick' the system into allowing their version of "patched bootloader" to be installed which would allow the flashing of a custom recovery....and there is a very specific way of getting this patched or unlocked bootloader onto your tab....this is with a program called "nvFlash" which runs via "apx mode" or "acer download mode" using our tabs unique ID, the cpuid.....to make it even easier The devs created a "package" which will nvFlash the patched bootloader AND a custom recovery all in one go!! Once we'd done that all we needed to do was to boot straight to recovery and flash our desired ICS or JB rom!!!
In the beginning, way back in the day....some folks weren't at all comfortable going to these lengths just to have a custom rom, so some of the rom cooks gave us the choice to upgrade to the patched bootloader or to stick with the HC bootloader, by flashing a custom HC kernel after the bootloader flash....this is what you were alluding to earlier??
Most roms now only work with the patched bootloader i.e. skrilax_cz 3.14 MUL -v8
keep in mind these are ICS and JB roms...
I hope that provides a bit more understanding on the bootloader thing and why we need it...
Now back to your original problem, not sure why you cannot flash a JB rom, have you tried it again??? I just cannot think of anything that would prevent you from flashing anything except an HC Rom - You might wanna ask the question in the JB rom thread...there might have been specific steps you needed to take to downgrade from 4.2 (can't think what though) or others may have posted similar problems...sorry couldnt help you out ....
...but let us know how you get on, good luck!!
Finally I have moved from HC to JB and that is how :
- ubdating the bootloader from v8 to v9
- nothing changed trying to flash any rom I already have
- then and I don't know why I download an Android 4.3.1 from TegraOwners forums [WIP]A500/A501 JB-MR2(4.3.1) - V8t6
link http://forum.tegraowners.com/viewtopic.php?f=9&t=1312
flash the rom and everything went OK !!!
Finally Fixed
Finally I have moved from HC to JB and that is how :
- ubdating the bootloader from v8 to v9
- nothing changed trying to flash any rom I already have
- then and I don't know why I download an Android 4.3.1 from TegraOwners forums [WIP]A500/A501 JB-MR2(4.3.1) - V8t6
link http://forum.tegraowners.com/viewtopic.php?f=9&t=1312
flash the rom and everything went OK !!!
Hi all,
needing help upgrading to MM.
I'm stuck on 1.17.40.1106 since I unlock the bootloader I can't receive further updates.
I've read that to be able to upgrade to MM you need to have .1531 firmware but since I'm stuck, can I sideload MM 21.40.1220 from Lolli 1.17.40.1106?
I have TWRP installed but not rooted.
First if you want sideload u must in "STOCK recovery"
And Seccond if you want update to MM u must have final firmware of LL. Go to asus.com check ur firmware version, If you are using last LL u just download MM firmware copy to sdcard and go to recovery-->apply update from sd card-->choose firmware MM and wait it update
.....
Dont flash firmware of asus.com if u use custom recovery it will brick your phone....
Thanks Val.
I'm having status 7 error both in stock recovery and twrp, another reason why Im stuck.
What are my options?
anyone?
stockdiordna said:
Hi all,
needing help upgrading to MM.
I'm stuck on 1.17.40.1106 since I unlock the bootloader I can't receive further updates.
I've read that to be able to upgrade to MM you need to have .1531 firmware but since I'm stuck, can I sideload MM 21.40.1220 from Lolli 1.17.40.1106?
I have TWRP installed but not rooted.
Click to expand...
Click to collapse
you have twrp but no root? how does that work?
in any case, the Terms of Service of the Asus unlock tool says you will not be able to get OTA update after using. We have confirmed that the unlock tool communicates with Asus when you use it - we highly suspect it sends your phone information to Asus to prevent official OTA.
I would root phone and install ROM.
check this out for issue of installing official MM update with TWRP:
http://forum.xda-developers.com/zen...ne-2-laser-t3399441/post67336853#post67336853
Thanks Eric.
I was reading the links you gave and have this questions:
1. Is it true that if I use custom recovery (TWRP) to sideload official firmware my phone will be bricked?
2. If I do "fastboot erase system" and flash full official firmware such as 1.17.1531, will it erase the custom recovery and go back to stock?
This way I can manually upgrade to MM once in stock recovery.
stockdiordna said:
Thanks Eric.
I was reading the links you gave and have this questions:
1. Is it true that if I use custom recovery (TWRP) to sideload official firmware my phone will be bricked?
2. If I do "fastboot erase system" and flash full official firmware such as 1.17.1531, will it erase the custom recovery and go back to stock?
This way I can manually upgrade to MM once in stock recovery.
Click to expand...
Click to collapse
1)i think twrp will not flash the official firmware, like if you downloaded it from Asus or got the ota .zip.
2) i do not know that command but it scares me to look at it.
in the thread i linked to, was answer to y question about flashing the official MM stock image.
Because it's coming soon my Rom.I write this manual
The transition to Beta 6.0 full custom bikes(RR,CM, or in my case HegsagonOS and BlurOS)
1.Install all necessary driver
https://software.intel.com/ru-ru/android/articles/intel-usb-driver-for-android-devices?page=1
------------------------
https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view
----------------
http://4pda.ru/forum/index.php?showtopic=657946&st=1020#entry41321160
---------------------
http://4pda.ru/forum/index.php?showtopic=657946&st=6510#entry51065375
----------
If you do not get to download it I will attach to this post
----------
Mirror:
https://yadi.sk/d/NQCiY--IsQjBr
--------
2.Download Asus Flash tool
https://yadi.sk/d/NQCiY--IsQjBr
3.Download Raw rom
For Z00A-https://yadi.sk/d/4cuw246vryaZA
For Z008-https://yadi.sk/d/Y51bbCIZsVaMf
-----------
4.Download the full Rom
Z00A-http://4pda.ru/pages/go/?u=http://d...ga=1.150456565.29281456.1461158714&e=39450652
Z008-http://4pda.ru/pages/go/?u=http://d...ga=1.213705175.29281456.1461158714&e=39450652
-----------
5.Download FOTA to update to 6.0
Z00A-https://mega.nz/#!KsAmkYwD!Aci3fETLz...kolc15kuM50hAo
Z008-https://yadi.sk/d/TMssexxtsVuqK
------------
All can now proceed to the installation
1.Go in Twrp do a full wipe(data,cache,dalvik,system)
2.After this go in bootloader and connect our device.
3.As soon as he settles in to Asus Flash Tool hold the path to the Raw Rom and flash
4.After flashing it will load you into the Rom
5.Go into stock recovery using the bootloader,if you see a dead robot, hold down the volume+ and the power button(about 5-10 seconds)
6.After that, our Full Rom, rename to update
7.In recovery click on adb update(or differently)
Code:
Write in Adb
Adb kill-server
Adb devices(if written sideload,then you are on the right track)
Adb sideload update.zip
The process is long,about 30 minutes
8.After you have written Xref 2.08(or another value)
9.Reboot to Rom and throw the Fota the root the device,restart and get the status bar on the triangle is and est our updates,agree with everything and updated(do not touch!!!)
10.After upgrading Happy):good:
Thank you, although this link fails to load for me >
5.Download FOTA to update to 6.0
Z00A- https://cloud.mail.EN/public/FpaM/UrDAUTcYn
timbernot said:
Thank you, although this link fails to load for me >
5.Download FOTA to update to 6.0
Z00A- https://cloud.mail.EN/public/FpaM/UrDAUTcYn
Click to expand...
Click to collapse
Fixed:fingers-crossed:
Thanks for the guide. But I am lost. Can you please be more specific for the part where flashing custom starts?
Because everybody wants to know how to flash custom roms on MM beta.
Russiamen said:
Fixed:fingers-crossed:
Click to expand...
Click to collapse
Hi, thanks for your work, but do not understand the step six and seven, I do not understand what to write in adb . I 'm sorry, I 'm a newbie .
Thanks for your help
Yousvel said:
Thanks for the guide. But I am lost. Can you please be more specific for the part where flashing custom starts?
Because everybody wants to know how to flash custom roms on MM beta.
Click to expand...
Click to collapse
Try use Dual boot patcher
Can i flash this rom via lollipop twrp?
[email protected] said:
Can i flash this rom via lollipop twrp?
Click to expand...
Click to collapse
yea)
Definitely I need to learn russian lol
Registering in 4pda without any russian comprehension is a hard task
EDIT: WTF? I cant pass by a russian captcha! looooooooooool
====================================================================
1.Go in Twrp do a full wipe(data,cache,dalvik,system)
2.After this go in bootloader and connect our device.
3.As soon as he settles in to Asus Flash Tool hold the path to the Raw Rom and flash
4.After flashing it will load you into the Rom
5.Go into stock recovery using the bootloader,if you see a dead robot, hold down the volume+ and the power button(about 5-10 seconds)
6.After that, our Full Rom, rename to update
7.In recovery click on adb update(or differently)
===================================================
A few questions to help me clear my confusion ?
4.After flashing it will load you into the Rom = .184 stock rom from raw .184 ?
6.After that, our Full Rom, rename to update and sideload = .184 stock rom
Any particular reason why we would need to sideload stock .184 rom -- when we are in .184 stock before putting FOTA 6.0 to internal ?
is it patched the 2nd .184 ?
@Russiamen did you make modifications in the 'full rom' zip file, or is it the same zip file that we can download from Asus site?
And I have the same doubts that @timbernot 's ones.
There is an newer MM build (V4.21.40.78_20160624_7972). Could I flash it instead the provided FOTA?
do you have a download link for 78?
after this steps the rom will rooted or have to root it?
Thank you for your guide
but raw rom link has not any file for z00a
i found this
https://mega.nz/#!KsAmkYwD!Aci3fETLz0NwdIOqcr1Bf6pAi_MPQkolc15kuM50hAo
Trying to flash raw image didnt worked. Error attached
For Z008-https://yadi.sk/d/Y51bbCIZsVaMf this link not working plz fix this link there showing "nothing found"
The Raw link for Z00A says "nothing found," and the FOTA for the Z00A says it needs a decryption key.
So this guide is to update your bootloader to the marshmallow firmware. So you can install Marshmallow based ROMS?
The reason I'm asking is because i've Unlocked my bootloader and installed the latest version of TWRP 3.02.0 Z00A and I was on android 5.0 on stock ZenUI. I'm getting Error 7 everytime I try to install a ROM. I'm certain i'm installing the correct ROM for the device. I've also wiped the device, cleared the cache, ect. And still nothing. Any suggestions? Thanks for the help.
hello，my zenfone ze551ml might be going to upgrade to mm 6.0， please tell me is it marshmallow stock rom camera better than 5.0？ is it 6.0 have setting sd card become internal storage？ is it 6.0 have mass big storage not just mtp when connected to pc ？
Sent from my S660 using XDA Premium 4 mobile app
UPDATE: This is now unneeded because threr is a faster way ro unlock bootloader on official MM here, he updated for official MM
Hi, I discovered an unlock method for official MM!! This maybe long but's it totally safe
You need:
Adb and fastboot environment ready PC
LP RAW File
Android 6.0 Beta Unlock tool
Android 5.0 One-Click Unlock tool
First version of beta MM (Z00A) (Z008)
Official MM zip (find it on Asus site)
Thanks to all people upload these links
Just do the following:
Flash the lastest LP via AFT (using raw file given above), wipe all data. If you already on MM, you have to downgrade
Unlock your bootloader using 1 click tool given above
Boot to stock recovery and sideload the first version of beta MM
Unlock the bootloader using MM beta unlock tool above
Boot to stock recovery
Two case here:
Case 1: You can't boot stock recovery
Normally boot your phone (to Android)
Setup it as a new phone
If it shows there is a new firmware, don't update!!!
Enable Developer options, then enable usb debugging
Copy the official MM zip to external sd card
Open command prompt, run adb reboot recovery, accept the adb permission if prompted
After it boots to recovery, select Apply update from SD, then choose the zip file you've copied before
Wait for it to update, it may stuck at flashing splashcreen, don't worry, it's trolling you, may be Asus forgot to update the script
Goto step 7
Case 2: You can boot stock recovery
Sideload the official MM zip (adb sideload <filename>.zip)
Goto step 7
7. Flash this TWRP (fastboot flash recovery <twrp>.img)
8. Root your phone using this method
9. Reboot, if it shows "Your phone has failed verification bla bla..", then you've success. It may reset loop like note 7 in the first time start, don't worry.
9. Enjoy :highfive:
Note: If you're facing with battery problems on MM, factory reset it in Settings > Backup and Reset > Factory Reset > Erase everything
Successfully on my ZE550ML
The warning screen is normal so don't worry and there is no way to fix it for now
Reverse
Reverse #2
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
NiTesh said:
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, BL will be relocked once you upgrade to MM.
If you want to unlock MM BL(6.0), refer to this thread.
Or you can downgrade to Lollipop referring to this thread. Then your BL(5.0) is unlocked.
Upgrade to MM
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
R3D SoX F4N said:
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
Click to expand...
Click to collapse
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
can anyone please upload official recovery for Zenfone 2 ZE551ML, currenty i have twrp installed on Android version 5.0 LP Stock
HungNgocPhat said:
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
Click to expand...
Click to collapse
i have twrp recovery at the moment cause i followed mr_gouvad2000 tuturial..
what do you sugest?
flash WW_ZE551ML_2.20.40.196_20160815.raw?
WW_ZE551ML_2.20.40.194_20160713.raw?
and then go and do what you told?
cheers
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
tridet18 said:
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
Click to expand...
Click to collapse
someone correct me if i am worng but....
https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
Look for this version WW-4.21.40.134
Hello, thank you but this version is official, i need de first beta 6.0
R3D SoX F4N said:
someone correct me if i am worng but....
Look for this version WW-4.21.40.134
Click to expand...
Click to collapse
that version...i can´t find it anywere..maybe someone here knows were to find it?
Updated the first MM beta link in OP
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
tridet18 said:
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
Click to expand...
Click to collapse
Have you downloaded the correct build? There are build for MM bootloader, if you flash the normal builds, it will fail and reboot to recovery again. Gapps is the same for all builds
After you install that special build, do not update to newer nightlies, it will fail. For updates, check the link i give you and see if there is a new MMBL build.
About that, here is the post: http://forum.xda-developers.com/showpost.php?p=68542370&postcount=8551
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
tridet18 said:
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
Click to expand...
Click to collapse
Run the script again (i gave you in above post). Download the CM13 in that link, not in the OP of CM13 thread. Flash that CM13 and Gapps (Gapps is universal for MMBL and LPBL).
May be you have corrupt download, I'm currently running CM13 on MMBL
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
hlp
tridet18 said:
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
Click to expand...
Click to collapse
how u unlocked bootloader