Excuse my bad English.
With the Kernel DorimanX b11.0 b012 now BLN have brought to works again.
I use CM12.1 official, while I proceeded as follows:
- Create a backup from the rom first.
- Under "/system/lib/hw" I have the "lights.exynos4.so" swapped from CM11.
- Because the lights.xxxx.so under CM11 have a different file name "lights.msm7x27.so" so it must be renamed in "lights.exynos4.so".
- set file permissions to 644
- reboot the rom
- Install STweaks and activate BLN. Now BLN should be work.
-------------------------------edit 19.10.15
I have the file from my second mobile phone Samsung GTS5830.
On it the phone is the rom "cm-11-20150912-UNOFFICIAL-cooper.zip; CyanogenMod 11 [Linaro]" installed.
http://forum.xda-developers.com/galaxy-ace/s5830-develop/rom-cyanogenmod-11-t3194339
The need file called under CM11 "lights.msm7x27.so"
But I can not upload the file. I don’t have the permission here.
With this file BLN and BLNWW works for me.
--------------------------------edit 20.10.15
With the changed file, the screen brightness can not be changed, unfortunately.
-------------------------------edit 20.10.15
I have found a *.so with the BLN works and the brightness control of the display functions.
The file is from image "decuro_GALAXYS2_4.8.8_4.1.zip Jelly Bean"
I uploaded the file under http://filehorst.de/d/bfwjFnoe
Delete under "/system/ lib/hw" the original file and add the new "lights.exynos4.so".
Set file permissions to 644
So far, I could not detect any error with the file.
charlie8104 said:
Excuse my bad English.
With the Kernel DorimanX b11.0 b012 now BLN have brought to works again.
I use CM12.1 official, while I proceeded as follows:
- Create a backup from the rom first.
- Under "/system/lib/hw" I have the "lights.exynos4.so" swapped from CM11.
- Because the lights.xxxx.so under CM11 have a different file name "lights.msm7x27.so" so it must be renamed in "lights.exynos4.so".
- set file permissions to 644
- reboot the rom
- Install STweaks and activate BLN. Now BLN should be work.
Click to expand...
Click to collapse
@charlie8104 Which "lights.msm7x27.so" you are talking about i just downloaded the cm11 snapshot12 and the file name you specified is same as the file name in cm12.1
If you have that file plz upload here
Have u tested this??
If this is the cause of the problem, it shouldn't be too hard to implement to the kernel. :good:
Thanks, gsstudios
Thanks for edit i will try it out
EDIT: BLN worked but m not able to control screen brightness it always stay high
EDIT: It works now..Thanks Man
charlie8104 said:
Excuse my bad English.
With the Kernel DorimanX b11.0 b012 now BLN have brought to works again.
I use CM12.1 official, ...
-------------------------------edit 20.10.15
I have found a *.so with the BLN works and the brightness control of the display functions.
The file is from image "decuro_GALAXYS2_4.8.8_4.1.zip Jelly Bean"
I uploaded the file under http://filehorst.de/d/bfwjFnoe
Delete under "/system/ lib/hw" the original file and add the new "lights.exynos4.so".
Set file permissions to 644
So far, I could not detect any error with the file.
Click to expand...
Click to collapse
Don't worry about your English!
Thank you for not only providing your solution here once, but for even keeping your OP up to date with improved versions after issues got reported. @gsstudios might cherry-pick here to implement BLN in his DorimanX kernel again, if it proves to work without further issues.
So once more, thank you for investigating on that.
Hi Guys,
I have the two lights.exynos4.so compared. In the * .so that I use an entry for BLN is included.
Line 5 in the lights.exynos4.so with BLN function.
------------------------------
#####################################[############################################################################################################################################################__aeabi_unwind_cpp_pr0#strcmp#pthread_once#malloc#memset#init_globals#free#open#sprintf#write#close#__android_log_print#__errno#__stack_chk_fail#__stack_chk_guard#pthread_mutex_lock#pthread_mutex_unlock#load_settings#fopen#fgetc#fclose#load_module_type#fread#pthread_mutex_init#NOTIFICATION_FILE_BLN#NOTIFICATION_FILE_CM#PANEL_FILE#BUTTON_FILE#HMI#__cxa_finalize#__dso_handle#__INIT_ARRAY__#__FINI_ARRAY__#__exidx_end#__exidx_start#__data_start#_edata#__bss_start#__bss_start__#_bss_end__#__bss_end__#__end__#_end#_stack#liblog.so#libc.so#libstdc++.so#libm.so#lights.exynos4###################################################### #######
------------------------------
The entry "NOTIFICATION_FILE_BLN" is completely missing in the original CM12.1 File.
The BLN entry would probably take place before the decompiled File Android Image is constructed.
Hi all, can't get this to work, is it that I need DorimanX kernel to do it? I thought you could do it with the stock CM12.1 kernel.
You need DorimanX.
Stock doesn't support BLN at all.
can someone attach the .so file? i can't seem to properly access the uploader's site...
:good:
souler456 said:
can someone attach the .so file? i can't seem to properly access the uploader's site...
:good:
Click to expand...
Click to collapse
@souler456
Hope this will help
EDIT: Check if it's working for you or not? Don't know why it's not working for me
sonupm said:
@souler456
Hope this will help
EDIT: Check if it's working for you or not? Don't know why it's not working for me
Click to expand...
Click to collapse
Yep. Working on my side. You changed permissions?
:good:
souler456 said:
Yep. Working on my side. You changed permissions?
:good:
Click to expand...
Click to collapse
Yes It work 1st time then I disabled capacitive buttons light and enabled it again after that BLN stopped working
sonupm said:
Yes It work 1st time then I disabled capacitive buttons light and enabled it again after that BLN stopped working
Click to expand...
Click to collapse
Try deactivate/active your BLN settings in Stweaks/Synapse...
:good:
souler456 said:
Try deactivate/active your BLN settings in Stweaks/Synapse...
:good:
Click to expand...
Click to collapse
Leave it. I don't use it anyways just wanted to help you and its working for you then no probs here:good:
You are on DU 9.8 Right ?? and I am on cm12.1 with Dorimanx by gsstudios. So I think this problem is kernel specific
I can make the updater script for dorimanx kernel to automate this process so we all have working BLN. Although I don't see it as a final solution, it works.
gsstudios
Edit: Got BLN working on kernel install. BLN will be fixed in next build
Edit 2: Now it isn't working
Edit 3: Now it works Seems like kernel reflash did the trick
@gsstudios
Same procedure like back then, when I tested successfully and your tests failed. So nothing much changed.
the.gangster said:
@gsstudios
Same procedure like back then, when I tested successfully and your tests failed. So nothing much changed.
Click to expand...
Click to collapse
Did you mean this method or last time when I 'attempted' to fix it? Because I'm now using this method to make BLN work on DorimanX. Last time I did the wrong thing and nothing would have happened.
gsstudios
Here is my commit which does pretty much the same thing as what the OP said but automated in the script: https://github.com/gsstudios/Dorima...mmit/d9432c3d87e26c09d6bad03ecdc22015ea4a9638
gsstudios said:
Did you mean this method or last time when I 'attempted' to fix it? Because I'm now using this method to make BLN work on DorimanX. Last time I did the wrong thing and nothing would have happened
Click to expand...
Click to collapse
I was referring to post #5 in here followed by these in the DorimanX-thread:
http://forum.xda-developers.com/showthread.php?p=63379702
http://forum.xda-developers.com/showthread.php?p=63438826
http://forum.xda-developers.com/showthread.php?p=63715347
and below. All in October.
the.gangster said:
I was referring to post #5 in here followed by these in the DorimanX-thread:
http://forum.xda-developers.com/showthread.php?p=63379702
http://forum.xda-developers.com/showthread.php?p=63438826
http://forum.xda-developers.com/showthread.php?p=63715347
and below. All in October.
Click to expand...
Click to collapse
Oh, that was my silly mistake. Wasn't clear enough I wasn't trying to use the fix back then, instead I was being a noob and replacing the file included in the kernel when I should have updated the script to replace the original file on the ROM. TL;DR, I replaced the Kernel lights.exynos4.so instead of ROM lights.exynos4.so :laugh: I am certain next build will have BLN fix
LoL
now I finally understand why our tests led to completely different results.
Related
MONFRO AOSP
This is a pure AOSP rom: it has no extra features so it can be snappy and smooth at maximum level.
Indeed the goal of this rom is to be as fast as possible.
- CM10 partition layout (422mb for data)
- Devil Kernel 1.4.1 VC (new kernels with new CM vsync available as addon)
- Devil Kernel Config included (and a init.d script generated with this program, to have everything set up stable at the beginning. If you set bigmem, before reboot remember to set 480 in videocamera settings, otherwise camera app will crash with bigmem). I suggest to install also NSTools, to have more overclocking and BLN options.
- GAPPS (updated to latest) are included
- I SUGGEST A FULL WIPE BEFORE INSTALLING THIS ROM, because added features from CM10, Helly Bean, AOKP and other roms can conflict with pure AOSP settings and functions
DOWNLOAD MONFRO AOSP 23.09.2012 FROM HERE
MD5: 086981af9bd829a742d2d34dd3652b81
- BATTERY MODS
- Battery % Mod CM style
- Battery % Mod Perka Newborn
- Battery Mod restore original icon
- MODS
- Devil Kernel 1.5.2 + new CM vsync
- Semaphore Kernel 2.1.2 + new CM vsync
- MODEMS/RADIO
Here you can find a lot of compatible modems/radio
- THEMES
- MonfroWhite by sephhi
@ALL: feel free to post mods and themes. I will add them to the 1st post
Reserved.
It took me a lot to upload this rom.
It was ready and working perfectly on 21.09.2012...all today i was out and i could upload it only now.
Monfro said:
Reserved.
It took me a lot to upload this rom.
It was ready and working perfectly on 21.09.2012...all today i was out and i could upload it only now.
Click to expand...
Click to collapse
will give it a try.....thank you!
Great work! Appreciate the effort for another AOSP
Looks like I've got another ROM to try out... it will have to be tomorrow though...
Sent from my SGH-I897 using XDA
LOVE the toggle customization. Little laggy on first running overall but so far so good.
It's official, I'm in love! Soft keyboard type option in messages so I can "Enter for new line" and not have that dumbass key!!! THANK YOU
AceofSpades90 said:
Great work! Appreciate the effort for another AOSP
Click to expand...
Click to collapse
I have to say thank you, because your Lanight rom showed me how fast AOSP roms are, as you can see from my enthusiastic comment of 20.09.2012.
But on Lanight 4.0 there were some glitches, for this reason i decided to work on an AOSP rom. I see that you worked to fix Lanight while i was working here: if i would have seen your new rom build, probably i wouldn't have worked on my AOSP.
joe3681 said:
LOVE the toggle customization. Little laggy on first running overall but so far so good.
It's official, I'm in love! Soft keyboard type option in messages so I can "Enter for new line" and not have that dumbass key!!! THANK YOU
Click to expand...
Click to collapse
Message app is from CM: it works better than AOSP one.
AOSP message let you enter messages only of 160 letters, for this reason i decided to substitute it with CM one.
cant get radio working.....
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Poke01 said:
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Click to expand...
Click to collapse
Here you can find a lot of compatible modems/radio, find the one that works best in your area:
http://soggycashew.weebly.com/cm7miui--ics-modems.html
If you have problems with SuperUser, try SuperSU from Play Store.
Updated first post with modems/radio link and battery % mods.
@ALL: feel free to post mods and themes. I will add them to the 1st post
Added mods to flash latest Devil and Semaphore kernels + new CM vsync
Your cappy looks promising because you are a recognized Dev. seems your also using same partition layout as of hellybeans that why can't flash this cappy on my captivate as I'm using broken sd device.
Sent from my SGH-I897 using XDA
s0ul_ali said:
Your cappy looks promising because you are a recognized Dev. seems your also using same partition layout as of hellybeans that why can't flash this cappy on my captivate as I'm using broken sd device.
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
This rom uses the same layout as CM10: 422mb on fastest nand for data and the rest (slow nand) for system.
I am sorry you can't try this rom. I have read here and there about people with broken internal SD but i didn't entered in details.
another AOSP rom to test...nice......will test it soon.....
Monfro said:
Here you can find a lot of compatible modems/radio, find the one that works best in your area:
http://soggycashew.weebly.com/cm7miui--ics-modems.html
If you have problems with SuperUser, try SuperSU from Play Store.
Updated first post with modems/radio link and battery % mods.
@ALL: feel free to post mods and themes. I will add them to the 1st post
Click to expand...
Click to collapse
I've been on xda long enough, but I'm drawing a blank at the moment. If my WiFi isn't turning on, would changing the modem affect that?
My Captivate has been relegated to my backup device, almost always used on WiFi.
From what I've played with on this rom, I like it a lot. Keep up the great work!
I have had similar issues with other JB AOSP roms with CM10 base. If I understand it correctly, it is due to the datadata partition that is included with this base (data partition table messes up the Kernel or something). To my knowledge there is no work around for this. Some of the AOSP roms here (LANIGHT for example) have a nodatadata version which solves the problem.
Hope this helps!
Poke01 said:
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Click to expand...
Click to collapse
Sagui said:
I have had similar issues with other JB AOSP roms with CM10 base. If I understand it correctly, it is due to the datadata partition that is included with this base (data partition table messes up the Kernel or something). To my knowledge there is no work around for this. Some of the AOSP roms here (LANIGHT for example) have a nodatadata version which solves the problem.
Hope this helps!
Click to expand...
Click to collapse
To enable wifi try these 2 methods:
1. turn on Bluetooth, reboot, activate wifi and now it works.
2. activate wifi, turn on Bluetooth, reboot and now wifi works
Sent from my Captivate
Monfro said:
To enable wifi try these 2 methods:
1. turn on Bluetooth, reboot, activate wifi and now it works.
2. activate wifi, turn on Bluetooth, reboot and now wifi works
Sent from my Captivate
Click to expand...
Click to collapse
Method 1 worked for me....Awesome! Thanks!
tried downloading the file and my antivirus went crazy lol .....
Zero4 said:
Method 1 worked for me....Awesome! Thanks!
Click to expand...
Click to collapse
So the problem comes from the Bluetooth kill function in devil kernel, which kills also wifi.
I suggest to disable devil idle and deep idle and to leave "enable Bluetooth " in devil kernel config app.
MrSwiss876 said:
tried downloading the file and my antivirus went crazy lol .....
Click to expand...
Click to collapse
It is because of superuser, but there are no viruses inside the zip.
Sent from my Captivate
Flashing!! :fingers-crossed:
Hey Monfro, how is going the battery life so far ?
[Windows APP][I9070] --| TerminalKernel Beta 0.3 & Siri Settings |-- Flash JB Kernels
So guys this program might result kind of useless, still i had some free time and wanted to do something for all the owners of I9070.
This program only works with Windows and I9070!
So basically what does it do?
kernel Installing in the easiest way!
A little Quick Video on how Terminal Kernel Works!
http://youtu.be/fQs0ZwHneTo
Welcome Screen ----> Click Terminal Kernel
Select the Kernel
Select the Push Button
Select the Flash Button
That's IT!
With a new functionality now you can Activate or Deactivate Siri Kernel's features! Wifi Boost and Sound Boost!
I plan on adding Automatic Logcat retrieve etc so that EVERYONE will be able to help our developers EASILY!
Feedbacks would be welcome!
REQUIREMENTS :
Usb Debug ON
(Settings ---> Developer Option ---> Activate ----> Debug Usb)
Rooted Phone Thanks Shaaan!
Shaaan's Root Method for JB
.Net Framework 4.0
Net Framework 4.0
The kernel MUST be flashable from Terminal Emulator (Thunderzap, Siri Kernel and Cocore E)
That's IT!
Download is in NEXT TOPIC (Changelog)!!!
CHANGELOG
Beta 0,3b
Not many changes here really, just code rivisited
Download 0.3b
Beta 0.3
Some stability improvements Added Siri Settings functionality! Now you can switch siri's features on and off! Let me know how it goes guys, bugs are always around the corner!
Beta 0.2.6
Ok should be fixed the problem that papski2 had , but this is a Temporary Build.. With this i mean, you wont see any confirm of the flash, the confirm will be the Phone that Reboots! I'm sleepy and i don't have time to do more testing since i have to wake up early to go to work.. so guys See you tomorrow night!
Beta 0.2.4
Ok i should've fixed a little bug... And i've added Logs Reports! If anything goes wrong please send me the log i would really appreciate it!
Beta 0.2.3
A few more flash performance improvement, now this is a multithreaded app My first multithreaded application Beware guys! No more hangs!
Beta 0.2
Some performance improvement, now takes less time to flash
I guess this is Stable Enough to call it a Beta !
V0.1c
Changed layout, added some info, Soon there'll be a nice tool as well in here
V0.1b
BugFixing, no more Hangs at Flashing of the Kernel i hope!
V 0.1
Initial Release, Alpha build for testing purposes.
WOW!
So We can change kernels easily from PC? Sounds good!
not work for me, stuck after click "Flash This Da*n Kernel"
Re: [Windows APP][I9070] --| TerminalKernel |-- Flash JB kernels from WINDOWS!
To do this , is it necessary that the phone should be switched on. Coz when I flashed a kernel using phone I get in to a bootloop ( stuckb on splash screen)....so can this help.
Sent from my GT-I9070 using xda premium
fongandy said:
not work for me, stuck after click "Flash This Da*n Kernel"
Click to expand...
Click to collapse
Yeah sorry about that, that's a known bug.. uhm... perhaps i should let the user manually reboot his phone.. it's the "adb shell reboot" command that is giving me this issue actually...
Anyway if your phone rebooted you should've flashed it successfully!
atishey23 said:
To do this , is it necessary that the phone should be switched on. Coz when I flashed a kernel using phone I get in to a bootloop ( stuckb on splash screen)....so can this help.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Ye... the phone must be switched on and with usb debug enabled.. Uhm that's pretty weird, give it a shot .
Logen91 said:
WOW!
So We can change kernels easily from PC? Sounds good!
Click to expand...
Click to collapse
As long as the Kernel can be flashed via Terminal Emulator YES!
Yeah i have to add that to the first post...
Someone could please give me some feedbacks? I need it to improve the program! xD
Chry_Gigio said:
Someone could please give me some feedbacks? I need it to improve the program! xD
Click to expand...
Click to collapse
Flashed kernel with your application. Just that "Non responding" is little confusing. But you said it will be fixed.
Otherwise all fine.
Q: Where is kernel file pushed? What folder on phone?
shut_down said:
Flashed kernel with your application. Just that "Non responding" is little confusing. But you said it will be fixed.
Otherwise all fine.
Q: Where is kernel file pushed? What folder on phone?
Click to expand...
Click to collapse
Thank you shut_Down that's exactly what i needed a tester for I uploaded another version (0.2.1)... with Non responding you mean that it completely hangs and you have to kill the process? or just that during the flash it hangs? I mean.. do you see the MessageBox that says : "Everything should be fine"?
They are pushed on mtn/sdcard Internel Card... Though if needed i could place it pretty much everywhere..
Chry_Gigio said:
Thank you shut_Down that's exactly what i needed a tester for I uploaded another version (0.2.1)... with Non responding you mean that it completely hangs and you have to kill the process? or just that during the flash it hangs? I mean.. do you see the MessageBox that says : "Everything should be fine"?
They are pushed on mtn/sdcard Internel Card... Though if needed i could place it pretty much everywhere..
Click to expand...
Click to collapse
Not, thats where I put kernels to test. Just wanted to know.
And no, it do not hang. It is just untill flashing is finished. I do see "Everything should be fine", and kernel is flashed. After phone start to reboot app is responding normaly. :good::good::good:
V 0.2.1. is working same, flash went fine. Just it has that Not responding too. It is not problem, just not to pay attention on it.
shut_down said:
Not, thats where I put kernels to test. Just wanted to know.
And no, it do not hang. It is just untill flashing is finished. I do see "Everything should be fine", and kernel is flashed. After phone start to reboot app is responding normaly. :good::good::good:
Click to expand...
Click to collapse
Ok so i have to create a separate Thread in order to handle the flash without hang... Uuuhm.. then i'll upload another version that puts it in sdcard/TerminalKernel
Chry_Gigio said:
Ok so i have to create a separate Thread in order to handle the flash without hang... Uuuhm.. then i'll upload another version that puts it in sdcard/TerminalKernel
Click to expand...
Click to collapse
Ok. And this could be very helpfull, because last few days I flashed a lot of kernels for testing. :good: :good: :good:
With this will be - download kernel, open app, select kernel, flash - done.
shut_down said:
Ok. And this could be very helpfull, because last few days I flashed a lot of kernels for testing. :good: :good: :good:
With this will be - download kernel, open app, select kernel, flash - done.
Click to expand...
Click to collapse
Ok! Anf anf... Now the kernels go into /mnt/sdcard/TerminalKernels/
This is now a Multi-Threaded application so it wont hang anymore
Sorry for going off-topic but can you please tell me how you made this app? I don't want to make or copy your app just want to make an app.. I want to impress my friends and my teachers on my College by making an app similar to this...
Did you use Visual Basic and C++ by any chance... because it looks like that..
I got a problem, i got debug usb mode on but still program says that i don't have it turned on and when i connected phone to PC it still shows on notification bar that it's multimedia mode or something like this. JB XXLPZ + deodex
papski2 said:
I got a problem, i got debug usb mode on but still program says that i don't have it turned on and when i connected phone to PC it still shows on notification bar that it's multimedia mode or something like this. JB XXLPZ + deodex
Click to expand...
Click to collapse
Pull down notification and tap on that. Choose MTP.
shut_down said:
Pull down notification and tap on that. Choose MTP.
Click to expand...
Click to collapse
This is MTP also i tried both options and still not working
R: [Windows APP][I9070] --| TerminalKernel Beta 0.2.3 |-- Flash JB kernels from WINDO
Just got out of work, will answer you ASAP. Which os are you using?
Sent from my GT-I9070 using xda app-developers app
Windows 7 x64, just uninstalled Samsung drivers and installed naked ones, still nothing
R: [Windows APP][I9070] --| TerminalKernel Beta 0.2.3 |-- Flash JB kernels from WINDO
Ok just to make sure, your phone is rooted right? As soon as I get home I'll include a log section in the program and will upload the new one, if you can wait until tonight so that u can send me the log I would appreciate it
Sent from my GT-I9070 using xda app-developers app
Q&A for [ROM][PORT][STOCK] TouchWiz Resurrected V1 (Build #2 Added!)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Proximity sensor is working
joshclaudio said:
Hello there sir The proximity is not working while on phone calls. Even when you test it with *#0*#, there is no response when you place your palm over the sensor
Click to expand...
Click to collapse
I was trying to fix this using adb,
when i put this command
cat /sys/devices/virtual/sensors/proximity_sensor/prox_cal
it replied "no such file or directory"
after then, I INSTALLED PROXIMITY SENSOR FINDER & RUN IT.
IT'S AMAZINGLY WORKING NOW !!!!!!!!!!!!!!!!!!!
https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder
rom
i notice that when i was in built in internet browser when i go to settings of browser and it start blinking, need to fix,
Badboy Padilla said:
i notice that when i was in built in internet browser when i go to settings of browser and it start blinking, need to fix,
Click to expand...
Click to collapse
same thing happens with me when i open MX player, screen starts blinking with I/O scheduler "null".
sir how to put weather on lockscreen?
help!!!
please tell me where is the option for USB palomiarla, I'll flash another rom and can not find it, thanks.
goldykb said:
I was trying to fix this using adb,
when i put this command
cat /sys/devices/virtual/sensors/proximity_sensor/prox_cal
it replied "no such file or directory"
after then, I INSTALLED PROXIMITY SENSOR FINDER & RUN IT.
IT'S AMAZINGLY WORKING NOW !!!!!!!!!!!!!!!!!!!
https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder
Click to expand...
Click to collapse
I installed the app you have stated, but it's not working for me. How did you made it work?
waiting....
Proximity Sensor not working
Hai NGuyen said:
Proximity Sensor not working
Click to expand...
Click to collapse
You can try flashing my zip below - its one I did for cm7 ages ago however I don't know if it works on stock roms
If not just replace the sensor files with the ones from stock rom
Flash this in cwm with system mounted
http://forum.xda-developers.com/attachment.php?attachmentid=2669398&d=1396684336
Also someone else posted another possible solution a few posts above yours - did you try it or have you even read it?
Thank you...
marcussmith2626 said:
You can try flashing my zip below - its one I did for cm7 ages ago however I don't know if it works on stock roms
If not just replace the sensor files with the ones from stock rom
Flash this in cwm with system mounted
http://forum.xda-developers.com/attachment.php?attachmentid=2669398&d=1396684336
Also someone else posted another possible solution a few posts above yours - did you try it or have you even read it?
Click to expand...
Click to collapse
but it's also does not working
Hai NGuyen said:
but it's also does not working
Click to expand...
Click to collapse
Like I said those were for cm7 - replace with stock sensor files & test
Please don't ask me to provide as I no longer have them
@goldykb, how did you fix the proximity sensor? Please reply... Thanks
Multi-Window Tab
Hello people,
Is there a way to turn off the multi-window tab on the main screen ? Maybe there is a way that I haven't found, would be glad if i can turn it off....
Twillight_Sparkle said:
Hello people,
Is there a way to turn off the multi-window tab on the main screen ? Maybe there is a way that I haven't found, would be glad if i can turn it off....
Click to expand...
Click to collapse
Go to Settings > Display. There you can find the option to disable MultiWindow
marcussmith2626 said:
Like I said those were for cm7 - replace with stock sensor files & test
Please don't ask me to provide as I no longer have them
Click to expand...
Click to collapse
Not working too
Sent from my GT-S5360 using Tapatalk 2
help!!!
after flashing, my fm radio, didn't work. help!
mhegz said:
after flashing, my fm radio, didn't work. help!
Click to expand...
Click to collapse
Did you flashed the new build (#2)?
FM Radio is not working in #1 but it is already fixed and implemented in build #2.
Great!
This is a killer ROM
Can you add digital clock widget and s5 wheater clock? There is analog clock only
The S5 lockscreen effect is not same like as the original one hehehe....
And also add swipe to remove and kill task in multitasking
And please add soft key feature like nexus and cm for galaxy y
Emergency Calls Only
I flashed the ROM but when I turned on the phone, there was no connection. Also wi-fi does not work. So I restored the previous ROM (MIUI). What can the problem be? Would you help me please?
efisane said:
I flashed the ROM but when I turned on the phone, there was no connection. Also wi-fi does not work. So I restored the previous ROM (MIUI). What can the problem be? Would you help me please?
Click to expand...
Click to collapse
sounds like you are using the wrong kernel - use a stock based kernel and make sure you are using the correct ril file for your baseband kernel combination
Hi there fellow Friends, I am very excited to Inform everyone that UKM now support our Xperia Z1.
After insisting Mr @apb_axel now we have Support for our device.
I am very thankful to Mr @apb_axel that he added our device.
Kindly head over to http://forum.xda-developers.com/showthread.php?p=52319063 for any support or questions.
Please do not ask any Questions Here its not my work, i am just informing everyone, all cradits goes to Mr @apb_axel
Also I will provide instruction to how to get this working on our Z1 -
So what you need:
-Root (obviously)
-Working Busybox
-Your ROM has to support init.d scripts
-Synapse
Click to expand...
Click to collapse
Download Links:
BusyBox
Universal Kernel Manager v3.6.1
Synapse Google Play Link
UKM Uninstaller
To get it working on Our Xperia Z1:
-Install BusyBox
-Does your ROM support init.d scripts?, IF it doesn't or you don't know try this Thread has an App, install it and Check or enable init.d script.
-Reboot in recovery
-Flash the .zip (No cache/dalvik wipe necessary)
-Install Synapse
-You're done!
Click to expand...
Click to collapse
Thanks and Regards
Abhimanyu
Wow thanks for let us know. It's a great app :good
I just uninstalled faux's app but the settings do not stay after a reboot
[Fenix] said:
Wow thanks for let us know. It's a great app :good
I just uninstalled faux's app but the settings do not stay after a reboot
Click to expand...
Click to collapse
Np dude, about Faux i had that problem so i checked for permissions and also uninstalled Faux and Data and reinstalled again now everything working without problem
abbychauhan said:
Np dude, about Faux i had that problem so i checked for permissions and also uninstalled Faux and Data and reinstalled again now everything working without problem
Click to expand...
Click to collapse
Yup faux it's OK, but with synapse I have this Can't set config after reboot
[Fenix] said:
Yup faux it's OK, but with synapse I have this Can't set config after reboot
Click to expand...
Click to collapse
I have the same issue with Synapse.. try asking on Original Thread
abbychauhan said:
I have the same issue with Synapse.. try asking on Original Thread
Click to expand...
Click to collapse
Ya bro I would like just to share my experience here so who will try this are warned. I'm searching for about half-hour on original thread for an answer but nothing. I will post a question asap
[Fenix] said:
Ya bro I would like just to share my experience here so who will try this are warned. I'm searching for about half-hour on original thread for an answer but nothing. I will post a question asap
Click to expand...
Click to collapse
Hi there are you on DARKCM? init.d script setting giving error, seems this related. D u have the same?
Works fine here will try to re install asap
(Oh yes same ROM bro)
[Fenix] said:
Works fine here will try to re install asap
(Oh yes same ROM bro)
Click to expand...
Click to collapse
Hi man. Ru still using UKM? Can u tell that u have this GPU Freq Seekbar error?
abbychauhan said:
Hi man. Ru still using UKM? Can u tell that u have this GPU Freq Seekbar error?
Click to expand...
Click to collapse
Hi my frined,
Sorry but I haven't the phone with me.
It's at assistance because of vibration issue, since 24 november (yes, I'm lost without my lovely z1 :crying.
When it comes back, I will root/UB and all the things, and then I will test the new version of UKM :fingers-crossed:
I will let you know asap :good:
[Fenix] said:
Hi my frined,
Sorry but I haven't the phone with me.
It's at assistance because of vibration issue, since 24 november (yes, I'm lost without my lovely z1 :crying.
When it comes back, I will root/UB and all the things, and then I will test the new version of UKM :fingers-crossed:
I will let you know asap :good:
Click to expand...
Click to collapse
Ok thanks man. BTW newest update of UKM is running good.
abbychauhan said:
Ok thanks man. BTW newest update of UKM is running good.
Click to expand...
Click to collapse
Hey friend, yes I confirm same problem under GPU settings.
Wich Rom are you using?
[Fenix] said:
Hey friend, yes I confirm same problem under GPU settings.
Wich Rom are you using?
Click to expand...
Click to collapse
Im using Slimkat. Well apb_axel got the issue it was wrong path for the Seekbar it will be resolved soon and TAP 2 WAKE setting also
abbychauhan said:
Im using Slimkat. Well apb_axel got the issue it was wrong path for the Seekbar it will be resolved soon and TAP 2 WAKE setting also
Click to expand...
Click to collapse
Nice to see this! :good:
I see also some missed things under vibration, bootloader status...
I'm on slimkat too :highfive:
Do you mind if i ask you to share your setting of UKM? I see your post about battery life on slimkat thread, quite impressed
[Fenix] said:
Nice to see this! :good:
I see also some missed things under vibration, bootloader status...
I'm on slimkat too :highfive:
Do you mind if i ask you to share your setting of UKM? I see your post about battery life on slimkat thread, quite impressed
Click to expand...
Click to collapse
Well Bootloader Locking and Unlocking will not work we know as its not just possible via script. Also Vibration thing has to be done via Kernel Level as if Kernel support then only App can do as its Global App so few things we will miss. I ll post my settings soon.
Settings Screenshots - Not much but I know someone can do batter Settings
Settings Screenshots - Not much but I know someone can do batter Settings
Also I have done Edit to OP Also for how to get it working on Z1. [emoji6]
@abbychauhan
Hey friend
Have you ever tried this tool with stock based kernel?
I'm asking because every time I tried with trinity kernel 3.0 the phone it's extremely laggy (it's not a config problem because I used also the stock one)
[Fenix] said:
@abbychauhan
Hey friend
Have you ever tried this tool with stock based kernel?
I'm asking because every time I tried with trinity kernel 3.0 the phone it's extremely laggy (it's not a config problem because I used also the stock one)
Click to expand...
Click to collapse
Never tried with stock
Anyone else got a problem where the voltages would jump to 1150mV for every frequency If they use this app? Running Dstrikers 4.7 with trinitykernel 3.0. (Stock based Rom) Everything else works fine though
Tried wiping the apps data and deleting the folder which fixes it for a bit but then it must happens again.
(6/30/15) Newest LLFK for T-Mobile Note EDGE N915T Lollipop.
Now has TCP congestion control options with default TCP Westwood
This version is flashable using TWRP.
Features:
SELinux=Permissive option
init.d support
adbd insecure
TCP congestion controls: TCP options include Westwood, cubic, reno among others: default is Westwood
Modifications that need to be made when using LLFK kernel
1)In build.prop set
ro.securestorage.support=false
2)For those that use AllShare Cast you will need to do two things.
First, add the following line at the end of build.prop
wlan.wfd.hdcp=disable
second, you need to have the Xposed module Wanum Xposed installed. In Wanum select "security hacks" then check box of Fake system status
Download link:
https://www.dropbox.com/s/6bg9l8qqcmmh83x/llfk_permissive_initd_adbd_tcp_lpop.zip?dl=0
Check below for other information that might come in handy and good luck!
(06/11/15)New Low Lying Fruit Kernel (LLFK) for Tmobile Note Edge (lollipop)
I've added adb insecure to kernel. This gives you root access to modify /system on phone from a pc
Features:
SELinux = Permissive option
init.d support
adb insecure
download link
https://www.dropbox.com/s/kr7xb22449p497w/llfk_permissive_initd_adbd_lpop.zip?dl=0
(06/10/15) Low Lying Fruit Kernel (LLFK) for Tmobile Note Edge (N915T)
Two new flashable kernels. One for Lollipop the other for Kitkat.
Lollipop: This new version has init.d support so, for example, you can write scripts that run on boot up. (more below).
Features:
SELinux = Permissive option
init.d support
https://www.dropbox.com/s/k8w423ecoj1covs/llfk_permissive_initd_lpop.zip?dl=0
Kitkat:This version now has TCP congestion control options available (e.g. Westwood)
Features:
SELinux = Permissive option
init.d support
adb insecure (allows you to have r/w access to phone's /system from you pc)
TCP congestion control options
Thanks to JT man for testing
https://www.dropbox.com/s/jbifzsuztb73wpg/llfk_permissive_initd_adbd_tcp_kkat.zip?dl=0
Example of init.d script to automatically set SELinux=permissive given here
https://forums.oneplus.net/threads/how-to-selinux-permissive.314120/
couple notes on how-to-selinux-permissive
1)You only need have permissions of /sys/fs/selinux/enforce set to 644
2)Make sure permission of init.d script is 775
One more thing, knox based warnings can be silenced using wanum.
(05/27/15) Low Lying Fruit Kernel (LLFK) for Tmobile Note Edge (N915T) running Lollipop.
For those that miss having SELinux=Permissive on their T-mobile Note Edge running lollipop, here is a kernel
that supports this setting. The kernel is based on the Tmobile Note Edge Lollipop source code. The only thing that was
changed was a setting in the kernel's Makefile to allow the user to choose whether they want to have SELinux=Permissive
as described for the previous Kitkat version of LLFK below.
NOTE: This time around, the kernel is packaged as a zip file than can be directly flashed in recovery.
But before I go any further I need to give credit to @TEKHD for providing a zipped
version of the T-Mobile kernel I could modify and, in addition, for testing it.
Please buy him a well deserved cup of coffee!
Once you have flashed the kernel and rebooted you are ready to set SELinux=permissive by opening a terminal and typing
su
and
setenforce 0
To check it worked, go to settings > About device and you should see, under SE for Android status, that it is now set to Permissive.
An alternative way to change the setting with this kernel is to use the apk SeLinuxModeChanger. Unfortunately this apk is no longer
available at the play store but you can still download it from the F-Droid site.
https://f-droid.org/repository/browse/?fdfilter=selinuxmodechanger&fdid=com.mrbimc.selinux
A third option would be to set up an init.d script if your rom permits it.
I must admit, at the time of this writing, I'm still on KitKat and have yet to try this on my phone. I'll be checking out lollipop soon
but till then, let me know if/how it works. If successful I'll start adding a few more low lying fruit I've picked!
Remember to do a full nandroid back-up before trying this so your phone can return to its original state before trying llfk if needed.
The usual disclaimer applies!
Good Luck!
lollipop LLFK download link:
WAIT! Only one person has tried this version and although it worked for him, I still consider it beta at best. You have been warned!
WAIT! WAIT! One more thing: You need to do the following otherwise you may experience problems with WIFI:
Download the apk BuildProp Editor and use it to set
ro.securestorage.support=false (thanks @TEKHD for checking this)
WAIT! WAIT! WAIT! May be an issue with private mode not working (see http://forum.xda-developers.com/showpost.php?p=61033627&postcount=109 ). I did not have this problem on kitkit. I am unable to test till next week so if someone can check it out that would be great.
http://www.4shared.com/zip/Z8g1u3FHba/llfk_permissive_lpop.html
dropbox link
https://www.dropbox.com/s/ud84t2fc3n9sqdg/llfk_permissive_lpop.zip?dl=0
Below only applies to the KitKat version.
(04/07/15) Update:
Well, I had a little time and decided to add a feature to LLFK. So for now it has the following three capabilities.
1)Allows you to set SELinux = Permissive
2)adb insecure
3)init.d support
Here is the link for the tar file. (follow same instructions given below to install via ODIN):
http://www.4shared.com/archive/2PepSJcPce/llfk_permissive_initd_adbtar.html
Let me know if/how it works...
New features:
The kernel is now adb insecure. This was accomplished by replacing the adbd file in ramdisk with one due to @freeza. Big thanks to him (as in buy him a cup of coffee!) for giving me permission to use it. With adb insecure you can now remount system as r/w from your pc which can come in handy at times.
The kernel has init.d support (Allows you to run scripts from boot) by modifying the ramdisk using the instructions in STEP 1 (Making kernel ready) of the following post
http://forum.xda-developers.com/showthread.php?t=2287540
So this part is done for LLFK
For it to work, the user still needs to make some minor modifications (add a file and create a directory) in their rom. To do this, please follow all 4 parts of STEP 2 (Making Rom Ready) in the same post.
Once you have completed STEP 2 you are ready to try some scripts.
You can search the Internet for init.d scripts to try.
For example there are some init.d scripts in the later half of the following post to give you an idea.
http://en.miui.com/thread-5685-1-1.html
If folks can experiment to see what scripts work I will make a list and post it here.
Seems to work OK on Hyperdrive and Lab Rats (let me know otherwise).
CAVEAT: When testing whether init.d support was successfully implemented I had tried some scripts (like echo "2048" > /sys/devices/virtual/bdi/179:0/read_ahead_kb; ) that should have modified some kernel settings at boot up. But as it turns out there are a set of scripts that run after boot up that supersede these settings. These scripts are in the file /etc/init.qcom.post_boot.sh. (some other neat stuff to play around with in there!) If you want those scripts to not take effect you can simply comment them out and then your init.d scripts will work.
The usual disclaimer and Good Luck
Original post 1/30/15
**********************************************************************************************************************************************************************
Hi. I thought I'd give out this kernel which allows one to set SELinux=permissive for a rooted T-Mobile Note Edge with base NK3. This setting is needed if you would like to run Linux on Android and, I believe Viper4Android if you are so inclined, as well as some other specialized apps (for future reference, let me know what apps you use that need this setting). Once you have loaded this kernel you can use the app SELinuxModeChanger, found in the play store, to set SELinux=Permissive and back to Enforcing. Note, this setting is maintained until you change it back in the app (rebooting will not change the setting). Anyways, what I am providing is a gzipped tar file that you can download, gunzip and then load on your phone using ODIN (version 3.07 worked fine for me, goes in PDA). Remember, this kernel is ONLY for the T-Mobile N915T NK3 rom. Actually, I have only tested it on the Lab Rats rom so hopefully it will work on other roms for T-Moble N915T with NK3 base.
As most folks like to have a name for their kernel I've decided to call this the "Low Lying Fruit Kernel" (LLFK) because it only has a minor change made to it. Indeed this kernel is about as low as it goes (lol) as not a single line of code is changed. I only changed an option in the Makefile from true to false. Details are given at the following github site.
https://github.com/mscion/Permissive-Kernel-N915T-EDGE/
Anyways, I've been using this kernel for over 10 days with no problems, but, of course , for those that try LLFK, the usual warnings apply! I am not responisble for anything that happens to your device as a conseqence of
using this kernel. Indeed you have to be crazy to try it as I have zero experience at this! You also might want to read this before you try setting SELinux=permissive:
http://en.wikipedia.org/wiki/Security-Enhanced_Linux
One more thing, while my preference is that an experienced dev make a kernel worthy of the N915T EDGE, I am open to suggestions to make some more modifications assuming the request are somewhat consistent with the philosophy of LLFK.
Thanks to @jimmydene84 for boot.img and @deeznutz1977 for testing!
Don't forget to do a full back up! Good luck!
Kernel Download link: For SELinux=Permissve option only
http://www.4shared.com/archive/oH5fE053ba/llfk_permissivetar.html
Hey that you that working. I was wondering if there was anyway you would make/try to make the same type of mod/kernel for the sprint version. N915P I believe it is. I will be more than willing to help anyway I can.
The reason I need SELinux to permissive is because to use certain bluetooth controller mapping apps u need it on permissive. Specifically the OG Moga Pocket, that controller only works with the pivot app. In order to have android pick it up as a hid controller, I need the app I use to access linux. I really hate to ask but it looks like there's very limited dev for sprint ?
VenpaCasa said:
Hey that you that working. I was wondering if there was anyway you would make/try to make the same type of mod/kernel for the sprint version. N915P I believe it is. I will be more than willing to help anyway I can.
The reason I need SELinux to permissive is because to use certain bluetooth controller mapping apps u need it on permissive. Specifically the OG Moga Pocket, that controller only works with the pivot app. In order to have android pick it up as a hid controller, I need the app I use to access linux. I really hate to ask but it looks like there's very limited dev for sprint ?
Click to expand...
Click to collapse
Ok, As long as you are willing to test it! Presumably no harm will be done as long as you do a full nandroid back up. Give me a few days to gather files and such...
Awesome @mscion
deeznutz1977 said:
Awesome @mscion
Click to expand...
Click to collapse
Thanks! What would be even more awesome is if someone tries it and it works! lol.
I'll flash it now kind sir
mscion said:
Ok, As long as you are willing to test it! Presumably no harm will be done as long as you do a full nandroid back up. Give me a few days to gather files and such...
Click to expand...
Click to collapse
Omg dude if ur really serious, hell yeah I'm willing to test. I'm extremely greatful n lost for words right now. Thanks so much for just attempting ?? at least. Made my day lol
deeznutz1977 said:
I'll flash it now kind sir
Click to expand...
Click to collapse
I hope you mean Odin it! Drum roll please....
mscion said:
I hope you mean Odin it! Drum roll please....
Click to expand...
Click to collapse
kernel is not se android enforcing
@mscion you still had to use the selinux changer app correct?
deeznutz1977 said:
kernel is not se android enforcing
Click to expand...
Click to collapse
Hi @deeznutz1977. Depending on rom, I think when you boot up you will get that message. Please check in settings > about device and see what SE for android is showing. For now I have pulled the kernel because I unwittingly used the boot.img from lab rats rom to pack in my zImage file that allows permissive setting, cause I thought it was not modded. I am currently waiting to hear from @jimmydene84...
deeznutz1977 said:
@mscion you still had to use the selinux changer app correct?
Click to expand...
Click to collapse
Yes. Check the OP for more details. Once you have installed this kernel, you have the option to turn permissive on or off with this app. You should also be able to set it from command line as well. May I ask which rom are you using? Also, as I just mentioned I need to check with jimmydene84 about his boot.img...
mscion said:
Yes. Check the OP for more details. Once you have installed this kernel, you have the option to turn permissive on or off with this app. You should also be able to set it from command line as well. May I ask which rom are you using? Also, as I just mentioned I need to check with jimmydene84 about his boot.img...
Click to expand...
Click to collapse
Stock deodexed. And sorry about not reading the op. Don't you know that all of the cool people don't read ops
Sent from my SM-N915T using Tapatalk
@mscion I asked jimmydene to pm you ...
deeznutz1977 said:
@mscion I asked jimmydene to pm you ...
Click to expand...
Click to collapse
Thanks very much! We're all good. I'm putting the link back up shortly.
Got excited for a minute I thought deeznutz1977 said he flashed on a Sprint Note Edge. Had to read it over a couple times.
VenpaCasa said:
Got excited for a minute I thought deeznutz1977 said he flashed on a Sprint Note Edge. Had to read it over a couple times.
Click to expand...
Click to collapse
Almost there. It appears to have compiled fine. I need to download the sprint rom and extract its boot.img file so I can pack the file for you to odin. Maybe this afternoon...
I will use the sprint deodexed version NK1, to extract boot.img from, that @snovvman has posted in the sprint developers thread. (hope that is ok! EDIT: We're good!)
mscion said:
Almost there. It appears to have compiled fine. I need to download the sprint rom and extract its boot.img file so I can pack the file for you to odin. Maybe this afternoon...
I will use the sprint deodexed version NK1, to extract boot.img from, that @snovvman has posted in the sprint developers thread. (hope that is ok! EDIT: We're good!)
Click to expand...
Click to collapse
Honestly your awesome. I was starting to regret my purchase too. I'll assume you weren't asking me if it's ok but if you were, yeah that's fine. I'm actually any using that ROM
EDIT: Just saw your edit n thanks (to both) that's so awesome! I owe you guys!
When ubr done are you going to post here or a new thread?
VenpaCasa said:
When ubr done are you going to post here or a new thread?
Click to expand...
Click to collapse
Just pm'd you with link. If it works I'll post it in this thread.