SM-900V Need Help to Go Back to Stock from NC2! - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

So, what happened is I let a friend borrow my Note 3 running on NC2 with Safestrap and Hyperdrive rom. This guy decided to do a factory reset in Hyperdrive instead of wiping the data from safestrap recovery. Now the phone is stuck in a bootloop with the first splashscreen and the blue "recovery booting" message at the top left corner. Then it re-boots and on and on.
Looks like Safestrap was wiped, unless there's another way to get in I can't think of?
I assume that what I need to do is revert back to the stock image with Odin. The problem I have now is that I no longer have access to the stock NC2 rom images/firmware and everywhere I have looked has taken the files down. If anyone has those files and could either send them to me or point me in the right direction I would be eternally grateful! Without them I'm screwed other than installing the OEM rom and I'll lose my precious root forever I fear, if I've been reading the forums correctly.
Thank you for any help you could provide!

dustoleum said:
So, what happened is I let a friend borrow my Note 3 running on NC2 with Safestrap and Hyperdrive rom. This guy decided to do a factory reset in Hyperdrive instead of wiping the data from safestrap recovery. Now the phone is stuck in a bootloop with the first splashscreen and the blue "recovery booting" message at the top left corner. Then it re-boots and on and on.
Looks like Safestrap was wiped, unless there's another way to get in I can't think of?
I assume that what I need to do is revert back to the stock image with Odin. The problem I have now is that I no longer have access to the stock NC2 rom images/firmware and everywhere I have looked has taken the files down. If anyone has those files and could either send them to me or point me in the right direction I would be eternally grateful! Without them I'm screwed other than installing the OEM rom and I'll lose my precious root forever I fear, if I've been reading the forums correctly.
Thank you for any help you could provide!
Click to expand...
Click to collapse
Alright, so I booted into Download Mode and then pressed down to restart, and that took me back to Safestrap and into the rom again. So, if anyone else has this problem, I hope this helps!
Something to be aware of though is that pretty much all the links to the stock rom files for the Verizon Note 3 are dead for anything older than Lollipop. If you still have the files lurking around on your phone or PC you may want to hold on to them for dear life.

Related

[Q] Very confused about what options are available to someone with nc4,

Hello all, I posted a similar topic a few days back, and cannot seem to find it. I fear it was deleted, but could be wrong. I only looked back a few pages in the history.
My problems have multiplied since that posting. I have nc4, when I bought my phone it was on there. Used towelroot and was able to root, download safestrap 3.75 and was able to add/delete slots, attempted to use hyperdrive, experienced a lot of weird things like my SMS would randomly not send, battery life was not spectacular,and just other misc things. IT seemed like I might have used a rom that could not be used properly for nc4. I then tried bajarom, which completely does not work for my phone, probably because it's nc2 and I didn't realize that?? Tried jellybeanz or whatever the exact name was, my phone won't even boot, says it successfully installed but sticks on the black screen.
Somehow over the past few days I managed to wipe my stock so I do not have the stock, thus I cannot go back.
I am sure I can find or maybe be directed to the stock firmware and reflash it.
I am not sure if it's possible but I'd really love to be able to get nc2, or if someone more knowledgable than myself could point out a solution for me, I would like to have a custom rom if theres one that would work properly on my phone.
Another confusion I have, with the nc4, am I able to use odin to flash a different radio, should I even bother? I would sincerely appreciate someone who would help clear some of this up for me, I'm pretty novice as you can see. Thanks in advance.
update
I guess my question is unclear. I really can use some help if anyone would be so obliged.
I am trying to use ADB to push the file over, it says access denied, I was previously rooted and verified as much. My issue is I need a way to send the roms over to my SD or my regular phone internal mem so I can at least load a rom. Currently my phone is bricked and I am just getting very upset, I really could use someone to give me a bit of guidance.
I opened the cmd with admin and it's still saying access denied. IS there a way to force the phone to open as a media device via cmd? That way I can edit sd card info and push on there what needs to go?
I am currently trying to find a way to get hyperdrive, or another rom over.
I have beanstowns rom on there, it appears as .zip yet when I try to install from safestrap I end up exploring the directory, as opposed to just being an option I can choose.
Baja is the same way, both are still on my sd, yet for whatever reason I cannot select them to install them.
Hope is not lost.
I think your initial problem was that you tried using rom slots. It specifies in the Safestrap OP that rom slots are only supported on NC2 bootloader. Since you are on the NC4 bootloader you cannot go backwards, however you can flash the NC2 kernel if you want to run a custom rom, you simply need to use the stock slot alone.
Since I know very little about ADB & Terminal CMD, I will try to give you directions to get up and running the way I know how.
First you'll need to reflash the stock NC4 tar via odin and reroot. Files can be found here.
Since you've flashed a couple different roms that have probably messed with the system settings I would do a factory reset before rerooting.
After you are up, running and rooted, follow the instructions here to get on the NC2 kernel.
Once you've completed these steps you will be on the NC4 bootloader with the NC2 kernel and be able to flash a custom rom in the stock rom slot. Only a NC2+ rom will function so make sure it is based on NC2/NC4 (i.e. jelly 'beans' will not run on NC2+ firmware as it is based on MJE).
kinstre11 said:
Hope is not lost.
I think your initial problem was that you tried using rom slots. It specifies in the Safestrap OP that rom slots are only supported on NC2 bootloader. Since you are on the NC4 bootloader you cannot go backwards, however you can flash the NC2 kernel if you want to run a custom rom, you simply need to use the stock slot alone.
Since I know very little about ADB & Terminal CMD, I will try to give you directions to get up and running the way I know how.
First you'll need to reflash the stock NC4 tar via odin and reroot. Files can be found here.
Since you've flashed a couple different roms that have probably messed with the system settings I would do a factory reset before rerooting.
After you are up, running and rooted, follow the instructions here to get on the NC2 kernel.
Once you've completed these steps you will be on the NC4 bootloader with the NC2 kernel and be able to flash a custom rom in the stock rom slot. Only a NC2+ rom will function so make sure it is based on NC2/NC4 (i.e. jelly 'beans' will not run on NC2+ firmware as it is based on MJE).
Click to expand...
Click to collapse
firstly, thank you so much for the reply.
I did flash nc2 kernal, but was confused when I still saw nc4 in the about section. I flashed with odin NC2_modem_kk.tar and nc2kernel.tar.
The issue I was having is with hyperdrive, and baja I had some serious issues, so I assumed it was because I was using them incorrectly, ie didn't install one of the above files correctly, or did something else wrong in the process. Just for example, with hyperdrive, my sms would just stop sending/receiving/ double sending. My sim card was not being recognized. And a whole lot of other issues.. So I kept messing around and now im at a point where nothing boots up, I cannot reflash, and I'm just stuck.
I will follow your link and attempt to do as you said, will wipe, and then will try again.
deindichter said:
firstly, thank you so much for the reply.
I did flash nc2 kernal, but was confused when I still saw nc4 in the about section. I flashed with odin NC2_modem_kk.tar and nc2kernel.tar.
The issue I was having is with hyperdrive, and baja I had some serious issues, so I assumed it was because I was using them incorrectly, ie didn't install one of the above files correctly, or did something else wrong in the process. Just for example, with hyperdrive, my sms would just stop sending/receiving/ double sending. My sim card was not being recognized. And a whole lot of other issues.. So I kept messing around and now im at a point where nothing boots up, I cannot reflash, and I'm just stuck.
I will follow your link and attempt to do as you said, will wipe, and then will try again.
Click to expand...
Click to collapse
Alright, I applied to nc4 and did a factory reset, made sure all my slots were deleted (had 2). Then factory reset and rebooted, saw safestrap, pressed continue, and i'm looking at a blank screen now as though there is nothing to boot to. I was under the impression factory reset would undo all and it has not.
Did I do something wrong, or am I missing something?
deindichter said:
Alright, I applied to nc4 and did a factory reset, made sure all my slots were deleted (had 2). Then factory reset and rebooted, saw safestrap, pressed continue, and i'm looking at a blank screen now as though there is nothing to boot to. I was under the impression factory reset would undo all and it has not.
Did I do something wrong, or am I missing something?
Click to expand...
Click to collapse
Did you already boot into download mode and flash the correct files through Odin? If so that should set your phone back to stock. Then you would have to re root.
fsolares said:
Did you already boot into download mode and flash the correct files through Odin? If so that should set your phone back to stock. Then you would have to re root.
Click to expand...
Click to collapse
I did and it did not boot me back into stock. I then found http://forum.xda-developers.com/showthread.php?t=1922461which led me to download the files directly from samsung.
After downloading the official partition table/ modem/ kernal from the verizon website I finally have this back to stock. LOL. wow. Thank you very much for helping, and working with me on this.
deindichter said:
After downloading the official partition table/ modem/ kernal from the verizon website I finally have this back to stock. LOL. wow. Thank you very much for helping, and working with me on this.
Click to expand...
Click to collapse
can u post the link from where u got the official partition table/modem/kernel on verizon website...
deindichter said:
After downloading the official partition table/ modem/ kernal from the verizon website I finally have this back to stock. LOL. wow. Thank you very much for helping, and working with me on this.
Click to expand...
Click to collapse
So are you good to go now?
moin786 said:
can u post the link from where u got the official partition table/modem/kernel on verizon website...
Click to expand...
Click to collapse
could you post where you found all this since im trying to get my phone back to stock.
Paulrybicki83 said:
could you post where you found all this since im trying to get my phone back to stock.
Click to expand...
Click to collapse
Seriously, just Google for the Samsung official firmware. It's on their site. Not Verizon.

NEED HELP QUICK, fast, and in a hurry please

Alright, so i soft bricked my phone is what the internet is telling me. the phone turns on but stops at the opening samsung screen with the unlock symbol on it. i can get into odin mode, and recovery, but i have a locked recovery. I went to flash a rom to my stock slot which is what the forum said to do so i did it. looking back it was pretty stupid, and now when i tried to recover my back up it came back with an error and then said there was no os system in my stock slot. i tried doing a recovery in rom slot 1 which it recovered but when i restarted my phone everytime it went into a boot loop. so now i have a very expensive paperweight. so my questions are one is there anyway that i could salvage my phone. two is there a way i could get it back to where i was with any of my recoveries that i have. i herd the odin method works but will it work for my phone? i tried the odin before but never could get it to work. also kies is out of the question because neither programs will recognize my phone.
oh yeah my phone. so the last thing i had running on it was the 4.4.2 update I337 NC1 would i have to flash the NC1 os or could i flash an earlier one because all i could find were the 4.2.2's and the NB1 flash.
tshaulis said:
Alright, so i soft bricked my phone is what the internet is telling me. the phone turns on but stops at the opening samsung screen with the unlock symbol on it. i can get into odin mode, and recovery, but i have a locked recovery. I went to flash a rom to my stock slot which is what the forum said to do so i did it. looking back it was pretty stupid, and now when i tried to recover my back up it came back with an error and then said there was no os system in my stock slot. i tried doing a recovery in rom slot 1 which it recovered but when i restarted my phone everytime it went into a boot loop. so now i have a very expensive paperweight. so my questions are one is there anyway that i could salvage my phone. two is there a way i could get it back to where i was with any of my recoveries that i have. i herd the odin method works but will it work for my phone? i tried the odin before but never could get it to work. also kies is out of the question because neither programs will recognize my phone.
oh yeah my phone. so the last thing i had running on it was the 4.4.2 update I337 NC1 would i have to flash the NC1 os or could i flash an earlier one because all i could find were the 4.2.2's and the NB1 flash.
Click to expand...
Click to collapse
1. As long as you can get into Odin mode, you're ok.
2. if you are on NB1 or NC1 base running safestrap 3.72, stock slot is the ONLY slot you can use. ROM slots do not work.
3. it's not really clear what you did to cause the boot loop, but lets get you back to stock...
Check out post 5 in my thread. If you follow these steps, you should be back to stock (and rooted with recovery, if you want) in no time.
http://forum.xda-developers.com/showthread.php?t=2616221
BTW - Post 2 has a list of ROMs that are safe to flash for safetrap users. Read the install notes first then follow the install instructions to install one of the ROMS.
guut13 said:
1. As long as you can get into Odin mode, you're ok.
2. if you are on NB1 or NC1 base running safestrap 3.72, stock slot is the ONLY slot you can use. ROM slots do not work.
3. it's not really clear what you did to cause the boot loop, but lets get you back to stock...
Check out post 5 in my thread. If you follow these steps, you should be back to stock (and rooted with recovery, if you want) in no time.
http://forum.xda-developers.com/showthread.php?t=2616221
BTW - Post 2 has a list of ROMs that are safe to flash for safetrap users. Read the install notes first then follow the install instructions to install one of the ROMS.
Click to expand...
Click to collapse
sir i will tell you that your a genius. its pretty cool to see the creator of the link you posted (which is you) being used on other sites. goes to show you really know what you are doing. for me well i thought i did, and wish i did. it might be awhile before i change roms again or at least until i get more knowledge.
ok so from my understanding safestrap is having difficulties being you and only flash in the stock slot. ok well what i did was flashed the hyperdrive rom (from your link) to the stock slot because in the hyperdrive forum it said only can flash on stock. so i did a full wipe on stock then flashed the hyperdrive and gapps. well my guess is when i did the full wipe it wiped the os. also i didn't grab the supporting modules for the rom so i didnt have wifi or service which made me try to restore from my nandroid and couldnt because it said error loading /system. then tried other things i thought would work and softbricked it so to that.
i think for newbies like myself its a lot of reading and well we could miss some things and screw things up. and plus samsung had to make different freakin models like the i337 or i9505 or the i9000 or something and everything has to be the exact same and perfect. but oh well. i am happy to tell you that my phone is fully restored and working from the day before all this happened. thanks again and sorry for the long message.

[Q] Phone has no recovery and other issues.

First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie

Trying to find NK7 firmware.

I am wanting to flash my phone back to absolute stock 4.4.4 NK7 but am having trouble locating the files needed to do so. I have looked everywhere (that I'm aware of) and have come up empty handed. Thank you for any help you can give in this matter. It is greatly appreciated.
Let me be more specific. I was attempting to install Optimalrom via Safestrap and now I only receive the "Samsung Galaxy S5", (unlock symbol) "custom" "Powered by Android" screen. I can still boot into recovery which is now LRX21T.G900VVRU2BOG5. I can also boot into Odin/download mode.
P.S. : If you'll take the time to assist me, I'll buy you a cup of coffee.
I bought some time with Sammobile. Downloaded the NK2 FW and now have my phone back in order.
Salval said:
Let me be more specific. I was attempting to install Optimalrom via Safestrap and now I only receive the "Samsung Galaxy S5", (unlock symbol) "custom" "Powered by Android" screen. I can still boot into recovery which is now LRX21T.G900VVRU2BOG5. I can also boot into Odin/download mode.
P.S. : If you'll take the time to assist me, I'll buy you a cup of coffee.
Click to expand...
Click to collapse
I flashed mine to Optimal last week and ran in to the same problem. If I recall, the instructions in the Optimal thread said to flash ROM then firmware then OD5 bootloader. I used that sequence and froze on the same screen as you. Decided to try something so I wiped again and flashed ROM then bootloader second and then firmware and it came right up as it should and has been running fine since. I think I might try something else though, not real impressed with the battery life versus stock un-rooted.
I just got back in to being able to root again last week with a warranty replacement stroke of luck that came in as BOC4

Successful Root of BOK3, but then I messed up, any help would be appreciated.

Hello,
I followed the guide for the Working Root Method For 5.0 Lollipop ROms and I was on BOK3 and everything actually worked and the phone was rooted, good to go. I was able to start the phone, installed busybox and safestrap, everything mentioned on the page, phone was good and working. However, I made a mistake. When I went to wipe the data so I could install a ROM I somehow managed to format, or wipe something I was not supposed to. Now, everytime I turn the power on it sticks on the Samsung Galaxy S5 page with the "Custom" wording and the open lock. I have been able to get to the download mode and when I tried to Odin to G900VVRU2BOK3_G900VVZW2BOK3_G900VVRU2BOK3_HOME.tar it says it passes, but still freezes on the "Custom" power on page. I honestly don't know what else I can do to try to get the device to power on/restore it, I've tried the N2 Kernal from the same page as the the tar and it doesn't get me anywhere, though it also says it passes. I'll be up for work in a few hours and if you have anything for me to try or requests for additional information I'll see what I can.
I have attempted to run the root bat file, just to see if it works, but that will not even list the phone.
Thank you,
Dale.
If you flash NK2 kernel and try to boot into lollipop, you're definitely going to freeze on boot because lollipop can't boot with a kitkat kernel.
Flash BOK3 stock image in Odin again. That image has the kernel in it also, so you don't need to flash anything else. Then boot into stock recovery (hold vol+UP and power), clear cache, then reboot.
If that doesn't work, boot back into stock recovery, clear cache and factory reset, then reboot.
That may work.
Thanks for the help. I don't know what I was thinking last night/this morning. All set now! For some reason now it didn't root when I went back through the procedures, but that is a problem to solve at a different time. I appreciate your calm response to my panic.
dhessjr2291 said:
Thanks for the help. I don't know what I was thinking last night/this morning. All set now! For some reason now it didn't root when I went back through the procedures, but that is a problem to solve at a different time. I appreciate your calm response to my panic.
Click to expand...
Click to collapse
You're welcome

Categories

Resources