So i tried to downgrade to 4.4.4 from 5.0 and I flashed a kernal and now it wont get past the s5 powered by android screen.
EpicDuck12345 said:
So i tried to downgrade to 4.4.4 from 5.0 and I flashed a kernal and now it wont get past the s5 powered by android screen.
Click to expand...
Click to collapse
Did you follow a guide, or just decide to flash a file blindly?
I loosely followed a guide but I have done this before on my old s5 and it worked fine.
Sent from my SCH-I605 using XDA Free mobile app
EpicDuck12345 said:
I loosely followed a guide but I have done this before on my old s5 and it worked fine.
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Why don't you search the thread of the guide you followed
Related
I have an S4 running 4.2.2 and it's currently rooted. But the root does not allow me to have a custom recovery. I want to be able to flash Cyanogen, but I'm not able to at the current time. What is your best idea of what I should do?
mars4prez said:
I have an S4 running 4.2.2 and it's currently rooted. But the root does not allow me to have a custom recovery. I want to be able to flash Cyanogen, but I'm not able to at the current time. What is your best idea of what I should do?
Click to expand...
Click to collapse
Contact CM for a solution? I'm sorry i cant be more help ful, but if they cant do it...........
You both need to do a considerable amount of reading before ruining your devices I would start with this thread
http://forum.xda-developers.com/showthread.php?t=2301762
"You stay classy San Diego"
Sent from my ATT S4 draped in velvety awesomeness
s4freak said:
You both need to do a considerable amount of reading before ruining your devices I would start with this thread
http://forum.xda-developers.com/showthread.php?t=2301762
"You stay classy San Diego"
Sent from my ATT S4 draped in velvety awesomeness
Click to expand...
Click to collapse
Can I do anything at this point if I'm on MF3?
mars4prez said:
Can I do anything at this point if I'm on MF3?
Click to expand...
Click to collapse
Check out Safestrap.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Safestrap puts my phone into a boot loop
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
mars4prez said:
Safestrap puts my phone into a boot loop
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Then reread the OP and make sure you do exactly what it states.
Take your time and just make sure to follow each step.
MF3 can be rooted and de bloated but has no real custom recovery.
Safe strap only allows one on 4.3 to flash 4.2 2 roms.
"You stay classy San Diego"
Sent from my ATT S4 draped in velvety awesomeness
I'm on 4.2.2 and I followed all the instructions very carefully, but whenever I try to load my slot with the Google edition ROM (4.2.2) the phone goes into a continuous boot loop. I have no idea what is wrong and I can't find a solution anywhere.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
mars4prez said:
I'm on 4.2.2 and I followed all the instructions very carefully, but whenever I try to load my slot with the Google edition ROM (4.2.2) the phone goes into a continuous boot loop. I have no idea what is wrong and I can't find a solution anywhere.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
make sure you partition your slot big enough...try 2 and 1.5 for data...
I did this and it still didn't work. Where is the best guide on how to exactly flash a ROM? I've been following a video guide on it, but it doesn't work.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
You are probably using the wrong GE ROM... Only certain ones work. Check the OP of the SS QA thread.
Sent from my SAMSUNG-SGH-1337 using XDA Premium 4 mobile app
Pick a smaller rom to start...gpe 280 mb...make sure you flash the mf3 module zip after the rom flashes...look in deadly venom 8.2 he has all the links. .his rom is awesome too..its 1.1 gb try that too
Sent from my SAMSUNG-SGH-1337 using XDA Premium 4 mobile app
Will CF Auto Root work with 4.4.2 I just updated to on my AT&T S4??? Any method to get it Back Rooted Yet?
tailgunner9 said:
Will CF Auto Root work with 4.4.2 I just updated to on my AT&T S4??? Any method to get it Back Rooted Yet?
Click to expand...
Click to collapse
There are people working on it. But no, there is not root on 4.4.2 yet.
Sent from my Nexus 7 using XDA Premium 4 mobile app
It's been less than 24 hours... have a little patience.
Try it out and let us know. When I get to my computer later I will be experimenting with some methods.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I'll be watching here LOL
I just got the update... silly me forgot to freeze up the OTA stuff in MK2
I am rooted (S4 4.4.2) using Geohot's root app...
http://geohot.com/activeroot/
montecristo1 said:
I am rooted (S4 4.4.2) using Geohot's root app...
http://geohot.com/activeroot/
Click to expand...
Click to collapse
Second for Geohot root method. I am currently popping my S4's ROM cherry and flashing SHOShock! worked great and Safestrap still works flawlessly :good:
Trying to Root AT&T Galaxy S4 i337 4.4.2 methods fail, why?
I am trying to root my AT&T Galaxy S4 i337UCUFNB1 android 4.4.2 kitkat. I have tried the towelroot method by Geohot and it fails because the phone reboots and I've also tried the "motochopper" method :"http://forum.xda-developers.com/showthread.php?p=40747604":4382 , which looked like it was going to work and then I get this error in the image provided. I don't know what I am doing wrong I followed the steps of both methods, if someone can help me figure this out I would be VERY grateful!
xobabydee26ox said:
I am trying to root my AT&T Galaxy S4 i337UCUFNB1 android 4.4.2 kitkat. I have tried the towelroot method by Geohot and it fails because the phone reboots and I've also tried the "motochopper" method :"http://forum.xda-developers.com/showthread.php?p=40747604":4382 , which looked like it was going to work and then I get this error in the image provided. I don't know what I am doing wrong I followed the steps of both methods, if someone can help me figure this out I would be VERY grateful!
Click to expand...
Click to collapse
You need to do the update to nc1, then use towel root
http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You need to do the update to nc1, then use towel root
http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
THANK YOU X100 !!!!! :good: :good: :good:
Okay so I spend hours trying to get recovery on my samsung galaxy s4 AIO SGH-1337Z and I finally do it.
I wipe and flash the pacman aio rom on the custom rom 1 slot .
Black screen, nothing else.
I do it on my goddamn stock rom and it just loads and stays stuck on the custom samsung screen.
Someone give me a tutorial to installing 4.4 kitkat on the AIO SGH-1337Z because i am fed up and i am so tired and frustrated and depressed and just please somebody help me.
I've had to odin the firmware about literally 56-60 times now trial and error and im getting exhausted.
PraisethesunnyD said:
Okay so I spend hours trying to get recovery on my samsung galaxy s4 AIO SGH-1337Z and I finally do it.
I wipe and flash the pacman aio rom on the custom rom 1 slot .
Black screen, nothing else.
I do it on my goddamn stock rom and it just loads and stays stuck on the custom samsung screen.
Someone give me a tutorial to installing 4.4 kitkat on the AIO SGH-1337Z because i am fed up and i am so tired and frustrated and depressed and just please somebody help me.
I've had to odin the firmware about literally 56-60 times now trial and error and im getting exhausted.
Click to expand...
Click to collapse
I know its hard to guide you since you dont see too many guides for your specific phone. All i know is that I have an AT&T phone on Aio.
I follow this guide
http://forum.xda-developers.com/showthread.php?p=52289782
I Odin full nb1 since i was stuck on download mode.
Then I downgraded to mk2
Once you are on mk2 you saferoot
Then install safestrap.
Unfortunally we can not flash custom roms since the bootloader is locked. We can only flash TW roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
netomel said:
I know its hard to guide you since you dont see too many guides for your specific phone. All i know is that I have an AT&T phone on Aio.
I follow this guide
http://forum.xda-developers.com/showthread.php?p=52289782
I Odin full nb1 since i was stuck on download mode.
Then I downgraded to mk2
Once you are on mk2 you saferoot
Then install safestrap.
Unfortunally we can not flash custom roms since the bootloader is locked. We can only flash TW roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I called the Aio representitives and they told me that 4.4 kitkat is coming for S4 in July (this July) and the note 3 is coming this month may.
Let's just wait and see !
PraisethesunnyD said:
I called the Aio representitives and they told me that 4.4 kitkat is coming for S4 in July (this July) and the note 3 is coming this month may.
Let's just wait and see !
Click to expand...
Click to collapse
Just remember until the devs dont find a way to unlocked the boot loader we are limit to TW rooms.
We are left to enjoy kikat but forget custom roms for now.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
netomel said:
Just remember until the devs dont find a way to unlocked the boot loader we are limit to TW rooms.
We are left to enjoy kikat but forget custom roms for now.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
enjoy kitkat ? how !? teach me how !
PraisethesunnyD said:
enjoy kitkat ? how !? teach me how !
Click to expand...
Click to collapse
You can't have KitKat on your version until the official one is released because you can't flash our bootloader
Sent from my SGH-I337 running BlackBox 3.0
Good so dont upgrade to kikat or yiu will be in the same boat like us
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
netomel said:
Good so dont upgrade to kikat or yiu will be in the same boat like us
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He's already on the same boat, his doesn't work with Loki so he only gets Safestrap and doesn't even get 4.4.2 or anything.
Sent from my SGH-I337 running BlackBox 3.0
Ok so I read a bit on the topic and it's a little confusing. So what do I have to do to actually get this thing up n rooted and flash roms.
Att galaxy s4
Android 4.4.2
NB1(whatever that means lol)
Sent from my HTC6525LVW using XDA Premium 4 mobile app
dunn816 said:
Ok so I read a bit on the topic and it's a little confusing. So what do I have to do to actually get this thing up n rooted and flash roms.
Att galaxy s4
Android 4.4.2
NB1(whatever that means lol)
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There is no direct root method for 4.4. So, you have to follow Deadly Venom Kitkat Magic Tool.
Using the tool, you would first partial downgrade to MK2, root using saferoot and install safestrap 3.72 (the only working recovery for us). Using the remain steps in the tool, you should be able to flash any ROM of your choice from All things ATT thread
jmjoyas said:
There is no direct root method for 4.4. So, you have to follow Deadly Venom Kitkat Magic Tool.
Using the tool, you would first partial downgrade to MK2, root using saferoot and install safestrap 3.72 (the only working recovery for us). Using the remain steps in the tool, you should be able to flash any ROM of your choice from All things ATT thread
Click to expand...
Click to collapse
Ok I'm gonna look into it thanks
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Hi guys,
I'm trying to install Philz on my Canadian Note 3 but I'm having problems. I used the instructions on this thread and everything went ok, however when I rebooted I got "recovery is not seandroid enforcing".
So I tried using Odin3 v3.09 and "philz_touch_6.08.9-hltecan.tar.md5", it went ok. But when I reboot into recovery the same thing happen.
So I tried philz_touch_6.12.8 and Odin 1.85, but they all do the same. Also installed Kies for the canadian version to update the drivers and still the same.
Any ideas?
Fix is here. You need the right version for the version of Android that you are running.
http://galaxynote3root.com/clockworkmodtwrp-recoveries/
victorbrca said:
Fix is here. You need the right version for the version of Android that you are running.
http://galaxynote3root.com/clockworkmodtwrp-recoveries/
Click to expand...
Click to collapse
Following all the wrong guides.
Follow the one in my thread, it's perfect for the Canadian Note 3. All the files are up-to-date and verified by myself.
nicholaschum said:
Following all the wrong guides.
Follow the one in my thread, it's perfect for the Canadian Note 3. All the files are up-to-date and verified by myself.
Click to expand...
Click to collapse
Got it all working now. Can you post the link in case someone finds this thread in the future?
victorbrca said:
Got it all working now. Can you post the link in case someone finds this thread in the future?
Click to expand...
Click to collapse
Sure, here it is.
http://forum.xda-developers.com/showthread.php?p=53632129
This teaches you how to upgrade from 4.3 to 4.4.2 invulnerable bootloader and then teaches you how to Root/custom recovery/ROM at the end.
All files are up to date at all times.
victorbrca said:
Got it all working now. Can you post the link in case someone finds this thread in the future?
Click to expand...
Click to collapse
Can you help me install twrp on my at&t note 3??
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
CHRIST STARZ said:
Can you help me install twrp on my at&t note 3??
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Correct me if I am wrong, but due to the locked bootloader on the N900A, you cannot have TWRP. You only have Safestrap.
Hey you know more than I do. I tried safestrap and it says I installed but nothing happens
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
CHRIST STARZ said:
Hey you know more than I do. I tried safestrap and it says I installed but nothing happens
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Continue asking on the AT&T Note 3 forums, we don't use safestrap here so we aren't the best peeps to ask
Man no luck
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app