After a whole week of searching and tripping knox i finally done it:
SM-G9208 root
After using CROM service and unlocking the CROM using ODIN to flash the attached file.
The source is this:
http://apk.tw/thread-704730-1-1.html
http://pan.baidu.com/s/1ntu1gjn
No credit to me
Here is my uploaded copy:
http://farzad.devbro.com/SM-9208_root_0902.tar
Dude, you saved my life
Was about to sell my s6 when I saw this man. Thank you so much
Edit: By any chance can you reupload the file here? Takes so long to download because it throttles at 25 kbps for me :/
Edit 2: Nvm got it to download fast haha FINALLY ROOT ACCESS!!
u root without tripping knox ?
ham4ever said:
u root without tripping knox ?
Click to expand...
Click to collapse
My knox was tripped before hand. Not sure if it does or not.
JoeCatarata said:
Was about to sell my s6 when I saw this man. Thank you so much
Edit: By any chance can you reupload the file here? Takes so long to download because it throttles at 25 kbps for me :/
Edit 2: Nvm got it to download fast haha FINALLY ROOT ACCESS!!
Click to expand...
Click to collapse
What is your Knox status?
Is it also for g920f with coh2? Knox?
devbro said:
What is your Knox status?
Click to expand...
Click to collapse
Don't really know how to check lol haha
JoeCatarata said:
Don't really know how to check lol haha
Click to expand...
Click to collapse
my knox is tripped.
After following this method I get a bootloop, any idea why and how to correct it?, already tried a factory reset but it doesn´t work, I had to flash stock rom again.
Edit: It happens because I upgraded to the latest 5.1.1 version available last week:
Model SM-G9208
Model name GALAXY S6
Country Taiwan
Version Android 5.1.1
Changelist 5683207
Build date Tue, 06 Oct 2015 11:54:52 +0000
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
So if you get the update alert in your phone DON´T do it, there is no known way to ROOT this new version.
It was not possible to install a previous 5.1.1 version either (G9208ZTU1BOH2), when I try to flash it with ODIN, the phone just displays an error message “SW REV CHECK FAIL DEVICE 2 BINARY 1”.
Any Ideas are appreciated.
EDIT:
Finally rooted with xiao1u root method!
devbro said:
After a whole week of searching and tripping knox i finally done it:
SM-G9208 root
After using CROM service and unlocking the CROM using ODIN to flash the attached file.
The source is this:
http://apk.tw/thread-704730-1-1.html
http://pan.baidu.com/s/1ntu1gjn
No credit to me
Here is my uploaded copy:
http://farzad.devbro.com/SM-9208_root_0902.tar
Click to expand...
Click to collapse
Root works perfectly, but has anybody got TWRP working on 5.1? I've always had unusable touchscreen issues on it so stayed back on 5.0.2 until somebody devs a working build.
Dissmeister said:
Root works perfectly, but has anybody got TWRP working on 5.1? I've always had unusable touchscreen issues on it so stayed back on 5.0.2 until somebody devs a working build.
Click to expand...
Click to collapse
no go. i used the TWRP app to flash all new files.
devbro said:
no go. i used the TWRP app to flash all new files.
Click to expand...
Click to collapse
So your twrp works perfectly on 5.1 base? If so, could you share it with me?
I've been looking for a twrp that worked on 5.1 without the touchscreen not working. Thanks man
Definitely no luck rooting my phone,
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
The file on first post didn´t work, and 3 days after I rooted (and everything was working perfectly) using this file:
http://pan.baidu.com/wap/album/file...26914354&fsid=128909912720545&adapt=pc&fr=ftw
I get the following error message every time i need root access:
"There is no SU binary installed, and SuperSU cannot install it. This is problem! If you upgraded to Android 5.0, you will need to manually re-root - consult the relevant forums for your device!"
If the phone is restarted or turned off after getting this error message the phone is death, it doesn´t start again.
I tried reflashing the root file, but it didn´t work.
I had to reinstall the stock ROM agan, and waiting for any effective root method for 5.1.1 OJ2 ROM.
0ptimus82 said:
After following this method I get a bootloop, any idea why and how to correct it?, already tried a factory reset but it doesn´t work, I had to flash stock rom again.
Edit: It happens because I upgraded to the latest 5.1.1 version available last week:
Model SM-G9208
Model name GALAXY S6
Country Taiwan
Version Android 5.1.1
Changelist 5683207
Build date Tue, 06 Oct 2015 11:54:52 +0000
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
So if you get the update alert in your phone DON´T do it, there is no known way to ROOT this new version.
It was not possible to install a previous 5.1.1 version either (G9208ZTU1BOH2), when I try to flash it with ODIN, the phone just displays an error message “SW REV CHECK FAIL DEVICE 2 BINARY 1”.
Any Ideas are appreciated.
EDIT:
Finally rooted with xiao1u root method!
Click to expand...
Click to collapse
Hey, the same thing happened to me, I was stupid enough to not read this before. I tried the xiao1u method and it works, but it breaks mobile data. Did you get that issue?
Dissmeister said:
Hey, the same thing happened to me, I was stupid enough to not read this before. I tried the xiao1u method and it works, but it breaks mobile data. Did you get that issue?
Click to expand...
Click to collapse
Not in my case, my data was working perfectly, but problems started to show up 3 days after I rooted it, in the end it didn´t start again.
I haven´t found any other way to root this build yet and I´m still looking for a custom rom with no success.
If you want to give another try to xiao1u file try to disable the setting for "allow Google to regularly check device activity for security problems or warn about potential harm" after a clean ROM install, you can do it going to the GOOGLE SETTINGS app > SECURITY > VERIFY APPS & uncheck Scan For Security Threats.
Please keep us updated, I´ll post if I find any way to solve it.
0ptimus82 said:
Not in my case, my data was working perfectly, but problems started to show up 3 days after I rooted it, in the end it didn´t start again.
I haven´t found any other way to root this build yet and I´m still looking for a custom rom with no success.
If you want to give another try to xiao1u file try to disable the setting for "allow Google to regularly check device activity for security problems or warn about potential harm" after a clean ROM install, you can do it going to the GOOGLE SETTINGS app > SECURITY > VERIFY APPS & uncheck Scan For Security Threats.
Please keep us updated, I´ll post if I find any way to solve it.
Click to expand...
Click to collapse
Ok you may know this already but I'll post just to let you everybody else know.
DONT UPDATE TO THE LATEST 5.1 OTA. It adds rollback protection to your bootloader, which makes it impossible for you to odin to another build, unless its the same or a future update.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/psa-odin-5-1-1-t3136151
As for our case, mate, I tried everything so far, the root method given by the OP bootloops on the latest OTA (previous 5.1 firmware on Sammobile is fine) and xiao1u method breaks mobile data for me although root does work perfectly. Funny thing is that if you tried the root by the OP and it got bricked, flashing the xiao1u method on top of it will get it working again, because its just the boot partition.
Atm, I just got sick of Samsung and their cr*p, had the same issues with my old Galaxy S4 with their Exynos. Got the Nexus 6P today and absolutely loving it.
I'll try to work it out sometime soon, if I do manage to get it working (mobile data for me) I'll post the fix here. This device is next to DOA for us as we've just got a couple of few blessed asian devs on it (all thanks to them). Unfortunately it may never be enough. I never got the issue you had, though it was just for last night, can you get into download mode? If so, odin the same firmware again. I used the 5.1 OTA on Sammobile, Taiwan. This is only for us who are already stuck in the new bootloader. You wont have root but at least your phone will work.
Cheers mate, all the best. Will update if I find a fix.
Dissmeister said:
Ok you may know this already but I'll post just to let you everybody else know.
DONT UPDATE TO THE LATEST 5.1 OTA. It adds rollback protection to your bootloader, which makes it impossible for you to odin to another build, unless its the same or a future update.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/psa-odin-5-1-1-t3136151
As for our case, mate, I tried everything so far, the root method given by the OP bootloops on the latest OTA (previous 5.1 firmware on Sammobile is fine) and xiao1u method breaks mobile data for me although root does work perfectly. Funny thing is that if you tried the root by the OP and it got bricked, flashing the xiao1u method on top of it will get it working again, because its just the boot partition.
Atm, I just got sick of Samsung and their cr*p, had the same issues with my old Galaxy S4 with their Exynos. Got the Nexus 6P today and absolutely loving it.
I'll try to work it out sometime soon, if I do manage to get it working (mobile data for me) I'll post the fix here. This device is next to DOA for us as we've just got a couple of few blessed asian devs on it (all thanks to them). Unfortunately it may never be enough. I never got the issue you had, though it was just for last night, can you get into download mode? If so, odin the same firmware again. I used the 5.1 OTA on Sammobile, Taiwan. This is only for us who are already stuck in the new bootloader. You wont have root but at least your phone will work.
Cheers mate, all the best. Will update if I find a fix.
Click to expand...
Click to collapse
The results of my attempt to root is not very consistent or stable since 5.02 to 5.1.1 on different updates of the Taiwan variant (G9208).
Since first 5.1.1 update, I used xiaolu method and succeed for few days, I don't know what do you mean " xiao1u method breaks mobile data", my 4G signal was fine. With xposed hooked, I also observed the much more boot time of previous rooted phone, sometimes a smaller bootloop (3 or 4 repeated loops).
But after a very recent "samsung security policy update", the root has "gone" an re-root became impossible no matter by xiaolu's or chainfire UPDATE-SuperSU-v2.46, most time they will cause bootloop and I can use odin to get back to initial status. Does that mean I don't have hope to root again?
Dissmeister said:
So your twrp works perfectly on 5.1 base? If so, could you share it with me?
I've been looking for a twrp that worked on 5.1 without the touchscreen not working. Thanks man
Click to expand...
Click to collapse
This works on my Taiwan variant G9208 on stock 5.1.1,
Go on TWRP repository of dl.twrp.me/zeroflte, seek two .tar files as below and inject them stepwisely with different method
1st (Odin via USB). Twrp-2.8.7.2-zeroflte.img.tar
2nd(use that TWRP -2.8.7.2, operate via an "OTG linked usb mouse" since touch not working...) . to flash Twrp-2.8.7.0-zerofltespr.img (but it's actually 2.8.7.1)
now you have a touchable TWRP.
But I can't get root now, even with xiaolu method, any one with luck, please note me
ttyy121 said:
The results of my attempt to root is not very consistent or stable since 5.02 to 5.1.1 on different updates of the Taiwan variant (G9208).
Since first 5.1.1 update, I used xiaolu method and succeed for few days, I don't know what do you mean " xiao1u method breaks mobile data", my 4G signal was fine. With xposed hooked, I also observed the much more boot time of previous rooted phone, sometimes a smaller bootloop (3 or 4 repeated loops).
But after a very recent "samsung security policy update", the root has "gone" an re-root became impossible no matter by xiaolu's or chainfire UPDATE-SuperSU-v2.46, most time they will cause bootloop and I can use odin to get back to initial status. Does that mean I don't have hope to root again?
Click to expand...
Click to collapse
It happened the same way with my phone, no hope so far.
Has anybody tried arter97 kernel?, G9208 support was added in the last beta but the problem is OJ2 particular release.
http://forum.xda-developers.com/showpost.php?p=63345352&postcount=2080
What is possible with this model?
Hi all. I'm on a custom stock 6.0.1 ROM. It's working really well since I installed it and I'm pretty satisfied with that but since then I dint installed any monthly security updates so I'm stuck on a May patch.
I know it's there an October update and was thinking if it's there a way to just install the security patch WITHOUT installing all the whole ROM. You know, if something is working just don't touch it.
And btw, developer of my ROM sold his device and there aren't more updates to his room. The one rocking my phone is the last one.
Someone can point me out. Thank you
guachanchoya said:
Hi all. I'm on a custom stock 6.0.1 ROM. It's working really well since I installed it and I'm pretty satisfied with that but since then I dint installed any monthly security updates so I'm stuck on a May patch.
I know it's there an October update and was thinking if it's there a way to just install the security patch WITHOUT installing all the whole ROM. You know, if something is working just don't touch it.
And btw, developer of my ROM sold his device and there aren't more updates to his room. The one rocking my phone is the last one.
Someone can point me out. Thank you
Click to expand...
Click to collapse
As far as i know there is no way to install ota or security patch updates unless you unroot your device with stock recovery. Even if you find ota zip file for security patch update you cannot flash via custom recovery your binaries bust be official to apply this patch.
Yep no way as far as I know. I flashed back stock recovery, unrooted, still OTA wasn't applied from Stock recovery, forgotten the error code.
If i install the UK fingerprint version here . Will the update still come to my phone? I see they have new updates now and oreo 8 is coming. Will i be able to install those from within the device or will i run into issues?
Also are there any issues using the UK rom over the US rom?
Also are there any better ways to enable the fingerprint sensor without install the UK version?
Does it also void warranty?
Thanks!
I'm in the US & I installed the UK ROM you link to above. It works as advertised. I wondered about receiving the update as well and read through the entire thread. It says you will be able to receive updates and you won't void your warranty since you are flashing official firmware. Of course that is just a post on an internet forum and carries no weight. Other than the warranty does it really matter? You can always update using Flashtool.
Yesterday I updated to 8.0 following this thread https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479 and now I have 8.0, my bootloader is unlocked, I have root, adaway, my phone passes safetynet, and most importantly it still works..
There are some subtle differences between N & O that have made it worthwhile. Sorry I can't be of more help, I can only share my positive experience.
rjglenn said:
I'm in the US & I installed the UK ROM you link to above. It works as advertised. I wondered about receiving the update as well and read through the entire thread. It says you will be able to receive updates and you won't void your warranty since you are flashing official firmware. Of course that is just a post on an internet forum and carries no weight. Other than the warranty does it really matter? You can always update using Flashtool.
Yesterday I updated to 8.0 following this thread https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479 and now I have 8.0, my bootloader is unlocked, I have root, adaway, my phone passes safetynet, and most importantly it still works..
There are some subtle differences between N & O that have made it worthwhile. Sorry I can't be of more help, I can only share my positive experience.
Click to expand...
Click to collapse
if you unlocked your bootloader, while you might be if there is an update, you can't just download and apply it from phone. If you're only interested in major android upgrade, this won't be a problem as at most we probably will only got one more android major version update (or none, it will be close to two years after device release).
If you are interested on monthly security update though, this could be a pain to flash manually each month
So if i just install the UK via the xperia flash tool method here (https://forum.xda-developers.com/x-compact/how-to/fingerprint-reader-version-flash-t3470154) , will i get OTA updates for security patches? Or do i have to manually do it every time?
mystycs said:
So if i just install the UK via the xperia flash tool method here (https://forum.xda-developers.com/x-compact/how-to/fingerprint-reader-version-flash-t3470154) , will i get OTA updates for security patches? Or do i have to manually do it every time?
Click to expand...
Click to collapse
Yes, you will receive updates as long as you do not tamper with the bootloader or recovery. If for some reason it doesn't work you can always use flashtool to apply an update. The convenience of the fingerprint reader working far outweighs the inconvenience of having to update a phone with a computer.