Related
I've searched for the last 30 min or so and I can't find a -for sure- yes or no answer. Is it possible to wirelessly charge the S4 in a Seidio Obex case? Or any waterproof case? I have the S4 Active but with the lack of dev support or wireless charging I'm considering selling my S4A and buying the regular S4+Obex case.
I just want to know if the S4 can wirelessly charge while in a waterproof case. I know the Samsung wireless back does NOT fit in the Obex case, but there are inserts available.
If I want to set up my phone for wireless charging can I buy any qi wireless charger or does it have to be the one specifically for the s5? It's about £35 here in the UK, but I've seen much cheaper ones. I will already have to pay £30 just for the wireless charging Samsung back cover, unless there are any cheaper options for that too?
I'm new to wireless charging so am just after some advice to save some pennies.
Thanks..
Sent from my Sinclair ZX81.
I'll hijack ur thread to post another question since I wanted to get the wireless charging mini pad, do you always have to plug the pad in mains or does it hold charge itself?
Sent from my GT-I9500 using Tapatalk
Any Qi wireless charging pad *should* work. It's a standard so you shouldn't need a Samsung specific pad. That said, all charging pads aren't created equal. I've used no-name Chinese ones, Nokia ones and Samsung ones and I've stuck with the Samsung ones.
The downside to cheaper ones can be overheating (rarely to "burn your fingers" hot, but they can warm up quite a bit) as well as sometimes needing very specific placement on the pad in order to start charging.
I haven't used wireless charging with the S5 yet as I'm waiting on the cover (not the S-View one) being available, but I've used it with my S3 (3rd party receiver inserted under the cover) as well as with my S4 (3rd party receiver initially, and then later the official Samsung wireless charging cover).
@skivnit - The charging pad needs to stay plugged in to something. You may be able to plug into a portable charger (and some portable chargers may come with Qi charging built in, but you're probably paying a premium for those).
Then glad I did cancel my order as I thought I'd get rid of the cables for good might just buy one of those portable chargers
Sent from my GT-I9500 using Tapatalk
First, I'm new to Qi charging, so please forgive (and correct) any mistaken assumptions I might have!
Anyways, based on the Budget Wireless Charger Showdown: 5 Qi Chargers all $11 - $15 shootout in the Nexus 5 forum, I decided to purchase a few Qi chargers. I received them and tested them with my friend's Nexus 5, confirming that wireless charging worked. Pretty neat!
A few weeks later, my Galaxy S5 wireless charging back FINALLY came in. I put it on my phone, put the phone on the charger, and nothing. I tried all the chargers, no luck. Nothing charged. But the Nexus 5 charged just fine. Assuming it was defective, I returned the charging back and ordered another one. Same thing. My phone doesn't charge on these chargers. The backs are both official Samsung accessories, bearing the Qi logo.
Is it incorrect for me to assume that all Qi charging backs will charge all Qi phones? Could my phone be defective? Any troubleshooting ideas?
Regardless, I'd love a recommendation for an inexpensive Qi charging back for my Galaxy S5. I'm going to need 3 or 4 of them.
Thanks!
ckbcowboy said:
First, I'm new to Qi charging, so please forgive (and correct) any mistaken assumptions I might have!
Anyways, based on the Budget Wireless Charger Showdown: 5 Qi Chargers all $11 - $15 shootout in the Nexus 5 forum, I decided to purchase a few Qi chargers. I received them and tested them with my friend's Nexus 5, confirming that wireless charging worked. Pretty neat!
A few weeks later, my Galaxy S5 wireless charging back FINALLY came in. I put it on my phone, put the phone on the charger, and nothing. I tried all the chargers, no luck. Nothing charged. But the Nexus 5 charged just fine. Assuming it was defective, I returned the charging back and ordered another one. Same thing. My phone doesn't charge on these chargers. The backs are both official Samsung accessories, bearing the Qi logo.
Is it incorrect for me to assume that all Qi charging backs will charge all Qi phones? Could my phone be defective? Any troubleshooting ideas?
Regardless, I'd love a recommendation for an inexpensive Qi charging back for my Galaxy S5. I'm going to need 3 or 4 of them.
Thanks!
Click to expand...
Click to collapse
This thread may be of interest....
http://forum.xda-developers.com/showthread.php?t=2776884&page=3
gridflash said:
This thread may be of interest....
http://forum.xda-developers.com/showthread.php?t=2776884&page=3
Click to expand...
Click to collapse
Thanks for the response. Unfortunately, the Qi charger you posted there costs nearly $50. Did the price go up?
Also, the photos of that unit look identical to the chargers I've bought (that don't work). I wonder if they're the same or different internally... Hmmn.
ckbcowboy said:
Thanks for the response. Unfortunately, the Qi charger you posted there costs nearly $50. Did the price go up?
Also, the photos of that unit look identical to the chargers I've bought (that don't work). I wonder if they're the same or different internally... Hmmn.
Click to expand...
Click to collapse
Geez.. That was $18.90 when I posted it last week. There must have been a run on them.
They were a good source because they were in New York most of the other sellers of this model are in China.
Edit: They're selling the White pad for $17.95
http://www.ebay.com/itm/like/171314555159?lpid=82
Has any one any experience with wireless charging on the Yotaphone 2? It supports the Qi standard but I've not ever had any device that can be charged wireless so I don't know what to expect.
There are some cheap chargers on ebay so I may get one to experiment with but wonder what others are using, how long a charge takes? is there a tiny sweet spot to get it to work? does it get hot? Any compatability issues?
Thanks
Sent from my GT-N8010 using XDA Premium HD app
manmikey said:
Has any one any experience with wireless charging on the Yotaphone 2? It supports the Qi standard but I've not ever had any device that can be charged wireless so I don't know what to expect.
There are some cheap chargers on ebay so I may get one to experiment with but wonder what others are using, how long a charge takes? is there a tiny sweet spot to get it to work? does it get hot? Any compatability issues?
Thanks
Sent from my GT-N8010 using XDA Premium HD app
Click to expand...
Click to collapse
Hi there,
Yeah actually I got one for my YotaPhone 2, it's ADATA Elite CE700.
First I have to say I was very disappointed because apparently you can only wireless charging the YotaPhone2 with the main screen facing up! Also you should know that the spot where Qi located is a bit small (3cm in height in the middle of the EPD Screen), but that also depends on the type of wireless charger you would use. Something like Tylt Vu would Support more area thus its more hassle free.
It's also good to know that with wireless charging you won't get Quick Charging anymore. Because In order to do that you must use the MicroUSB port. But again how long a single charge takes depends the type of the Wireless Charger and the amount of output current it has which most of them are 1~1.5A.
For your last concern, any Qi Wireless Charger will do but try to get one of the Tylt Vu. It has the best reviews. And the phone won't get hot during wireless charging if you must know.
And something which I'm not sure whether its my wireless charger or it's general, is when the battery is 100% the charging won't stop, unlike the normal charging with dedicated adapter which cut the current when the charging is complete.
Sent from my HTC One using XDA Free mobile app
Hi, thanks for your detailed reply, I've now ordered two different generic chargers off amazon to experiment with, they are coming from China I think but were less than a tenner, I'll report back on these after ive used them for a bit.
It seems less than ideal for me to have to charge with the EPD facing down but I guess this is an engineering limitation. I'm sure there would be advantages and disadvantages of each side facing up during wireless charging.
I recently bought the Nokia DT903 wireless charging plate.
It works effortlessly with the Nexus 5. I can pick it up and place it back for charging with no connection worries.
With the Yotaphone 2 it does work, but it has to be in EXACTLY the right spot.... I'm talking millimetre precision here.... it becomes really frustrating to use and spoils one of the key benefits of wireless charging.
That's what is worrying me about Qi charging, I like the idea of wireless charging for the convenience, I work shifts and fiddling with the usb cable when I get in can disturb my partner, just being able to lay it on my night stand would be great, but sometimes I check the time on my phone in the middle of the night, or get up for the loo and nudge the charging cable and move the phone and if its really fussy about how it sits on the charger then I could end up with the phone not being charged overnight.
The ADATA Elite CE700 mentioned by Parisabs4 above looks like a good solution as it is adjustable and with the phone sitting on the cradle it is hopefully easier to hit the sweet spot.
QI charging experience
Okay so I've now tried 3 different Qi wireless charging plates and I have found that all of them exhibit the same problems whilst attempting to charge my Yotaphone 2
In the picture there are 2 single coil chargers and one triple coil charger (the one that is not flat) they are budget models, costing between £4 and £7 on Amazon.
I can get the Yotaphone to begin charging correctly on all three chargers, the phone says it is charging and the qi devices LED blinks to confirm charging. After 10 - 15 seconds the Yotaphone & chargers will stop charging, the indicators on the phone and charges indicate that charging has stopped. After a couple of seconds charging will recommence for about 15 seconds and the stop again, this cycle repeats for a few times then charging stops all together. Lifting the Yotaphone off and then returning to the charger will recommence charging.
My conclusions are that
My device has a faulty wireless charging receiver. (This is unlikely as im on my second device with the same symptoms after an RMA for a previous fault)
The charging software in the Yotaphone is buggy.
The Yotaphone is not fully compatible with the QI standard.
The Qi chargers I am using are not powerful enough for the Yotaphone. (Unlikely as I've now tried 3 different chargers but they were cheap!)
Has anyone else experienced this problem or is using a charger that is proving reliable?
I'm tempted to try the official wireless charging block as it ought to be compatible with the Yotaphone but its £40 wasted if not (although it can charge via a usb port too)
WHY IS NOTHONG EVER EASY IN THE TECH WORLD!!!!
The "old" Samsung S-Charger does not work either.
I got the following white list from the Yota support:
WCP-400 LG, Nexus5
WCP-300 LG, Nexus5
DT-601 Nokia
DT-900 Nokia
T-100 Speed
T-200 Fonesalesman
UNINC-585Q Uway
MP-01 Mpower
T-201 Speed
A010 Nexus(Google)
EP-PG900IBR Samsung S5
WCH-10 Sony
matts2 said:
The "old" Samsung S-Charger does not work either.
I got the following white list from the Yota support:
WCP-400 LG, Nexus5
WCP-300 LG, Nexus5
DT-601 Nokia
DT-900 Nokia
T-100 Speed
T-200 Fonesalesman
UNINC-585Q Uway
MP-01 Mpower
T-201 Speed
A010 Nexus(Google)
EP-PG900IBR Samsung S5
WCH-10 Sony
Click to expand...
Click to collapse
Thanks for that info, I've ordered a Nokia DT-601 from the whitelist, fingers crossed!
As a footnote I have found my tablet charger (a 2.1amp samsung) works with one of my qi charging plates to charge the yotaphone but any other 2.1amp charger exhibits the same problems as the regular 1 amp chargers I've been trying to power the qi plates. Also I've discovered the Yotaphone will not charge from the usb socket in my car but any other device I connect to the socket charges fine, this is one flakey device!
Sent from my GT-N8010 using XDA Premium HD app
yota releasing their own brand wireless, qi charger (has its own 4000mah battery) fairly soon I think. will be priced about £32
matts2 said:
The "old" Samsung S-Charger does not work either.
I got the following white list from the Yota support:
WCP-400 LG, Nexus5
WCP-300 LG, Nexus5
DT-601 Nokia
DT-900 Nokia
T-100 Speed
T-200 Fonesalesman
UNINC-585Q Uway
MP-01 Mpower
T-201 Speed
A010 Nexus(Google)
EP-PG900IBR Samsung S5
WCH-10 Sony
Click to expand...
Click to collapse
Thanks matts2 for sharing the list
I bought a Nokia-601 (£12.99 of Amazon) an it works perfectly, I've just charged from 35% to 100% with no issues. It even comes with its own 1.5amp mains usb charger
I'm happy happy happy now
Sent from my YD201 using XDA Free mobile app
manmikey said:
Thanks matts2 for sharing the list
I bought a Nokia-601 (£12.99 of Amazon) an it works perfectly, I've just charged from 35% to 100% with no issues. It even comes with its own 1.5amp mains usb charger
I'm happy happy happy now
Sent from my YD201 using XDA Free mobile app
Click to expand...
Click to collapse
I bought a cheap nameless one, have yet to receive it, I hope it will work in combination with a powerful adapter. Anyone got these cheap (5 USD) chargers working with their phone?
Another good QI charger for YP2 is/are the ones that IKEA sells. They have several models, but all seem based on the same platform powered by a 19V DC adapter.
I couldn't get any cheap QI chargers to work reliably with my YP2, but the IKEA chargers work great. They have some margin in positioning the phone on it, and prices start at around $30/EUR 25, so not to bad. I cannibalized the electronics from a JYSSEN to transplant them into a custom 3D printed charger case.
Does anyone have any experience using this Samsung 2A charger with the Yotaphone 2?
https://www.amazon.com/Samsung-EP-PG920IBUGUS-Wireless-Charging-Charger/dp/B00UCZGS6S/
UPDATE: Never mind, I ended up buying the Nokia DT-900 since it's on the official list of supported chargers.
I bought my first wireless charger , a cheapo one from China just to see how they are. Cheap as in 4 USD. It does work but exhibits behaviour like described above. All night only charges it a little and the on light is not on much. I thought it was a problem with a cheap charger, but maybe not, it sounds like Yotaphone firmware. I don't have any problem finding the sweet spot.
I was reading about new LG fast charger that is coming out soon, first ever fast 15w wireless charger. But of course it will be expensive .
http://m.androidcentral.com/lg-announces-new-super-fast-wireless-charger-get-you-cables-good
I bought an 3-coil-qi-charger-stand from China (eBay article 381639407985) about 10€. It works perfekt.
Cheap Single coil charger work also, but only if you place the Yotaphone at the exactly right position ( only 2mm tolerance). As the coil inside the 2,80€ single-chip-computers charger from China is often not places correctly inside the housing, you first have to correct that.
So tripple-coil is to be prefered.
One nice thing: Charging via QI and USB-OTG works fine at the same time on Yotaphone. You can put the Yotaphone 90 degree rotated on the 3-coil-charger-stand and watching Videos from a USB-Stick.
I even think about building an own small OTG-Adapter, using a extreme small micro-usb-connector (like used in universal QI reciver-plates), a very small USB-Micro-SD-Reader, some wire and epoxy. The SD-Reader will be placed on the lower frame of the ePaper. I use a bumper and would cut the neccassary space out of it. So I could build an nearly invissible (with bumper) SD-Card-slot. 64GB extra space is nice...
I'm using a Nokia DT-910 that I originally bought for my Nexus 5 a few years back.. works just fine with the YotaPhone 2..
No need to be careful with positioning or anything like that.. just put the phone on it and that's it.
The benefit of a charger like this is that you can actually see the screen while charging instead of it being flat on the table like some other models.
Link with pictures: https://www.microsoft.com/en/mobile/accessory/dt-910/
Has anyone used a wireless power bank with the Yotaphone ? I was amazed that this technology existed really
Parmo100 said:
Has anyone used a wireless power bank with the Yotaphone ? I was amazed that this technology existed really
Click to expand...
Click to collapse
Never thought about it but they do seem quite common https://www.youtube.com/results?search_query=qi+wireless+powerbank
Or you can easily make one yourself by taping a wireless charger to a powerbank
In that case there is a wire, between PB and Wireless charger. �� so NOT wireLESS, lol
Can I use a QI Wireless power bank to charge the Yotaphone in my pocket?
Sometimes my phone runs out of juice. Is it possible to buy a power bank with wireless charging capabilities and use it to tirelessly charge my phone, by placing the power bank in my pocket next to my phone?
Just about to get my Priv (FINALLY!), buying stuffs to armor it up - quick chargers, cases etc..
So here is the question: as there is no official wireless charger for Priv, which 3rd-party wireless charger available is best for it?
84281227 said:
Just about to get my Priv (FINALLY!), buying stuffs to armor it up - quick chargers, cases etc..
So here is the question: as there is no official wireless charger for Priv, which 3rd-party wireless charger available is best for it?
Click to expand...
Click to collapse
I don't have priv yet, but planning to buy one in a few days. These are the wireless chargers I was looking at:
1) Anker
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_5&smid=A294P4X9EWVXLJ
2) Spigen
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_6&smid=A2SFKRF5TPZMT5
3) MoKo
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_7&smid=A2VT4H683M5NNA
4) Choetech
http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_sfl_title_8&smid=A1NCVKF8LXGAA9
#3 has AC adapter included, but that is about it. I want it to be like a stand, so it will be easier to see what if I get a text, call...
Not sure if you bought one yet, but I've had mine for a few days and I can tell you the wireless chargers that will work well with this will be a select few. It seems the coil in the PRIV is near the very bottom of the back, so chargers like the spigen listed above (Which I have and use with my Nexus 7 LTE) don't work well at all. It continuously connects and disconnects because the coil is so low on the PRIV that it doesn't line up well. I also have the most recent Samsung QI charger that I got for my Note 5, and that one actually works pretty well because you can set the PRIV on it towards the very bottom of the device. Another example is trying to us the Nexus QI charging orb, which the PRIV won't work well with because putting it on there so close to the bottom causes the device to fall over the top because it's top heavy. So long story short a pad or flat surface charger will most likely be best as it allows you to position the device properly. Hopefully this helps!
PS: This is the best device I've had in a long time, and I've owned most current and past flagships. Reminds me of my days on webOS with my Palm Pres...but a million times better!
dmband64 said:
Not sure if you bought one yet, but I've had mine for a few days and I can tell you the wireless chargers that will work well with this will be a select few. It seems the coil in the PRIV is near the very bottom of the back, so chargers like the spigen listed above (Which I have and use with my Nexus 7 LTE) don't work well at all. It continuously connects and disconnects because the coil is so low on the PRIV that it doesn't line up well. I also have the most recent Samsung QI charger that I got for my Note 5, and that one actually works pretty well because you can set the PRIV on it towards the very bottom of the device. Another example is trying to us the Nexus QI charging orb, which the PRIV won't work well with because putting it on there so close to the bottom causes the device to fall over the top because it's top heavy. So long story short a pad or flat surface charger will most likely be best as it allows you to position the device properly. Hopefully this helps!
PS: This is the best device I've had in a long time, and I've owned most current and past flagships. Reminds me of my days on webOS with my Palm Pres...but a million times better!
Click to expand...
Click to collapse
My Priv is arriving tomorrow I will use your recommendation when I will be buying wireless charger... It is just when using the pad, the device is laying down instead of being vertical so I could see and read messages...
By the way, have you tried to put your Priv in landscape on the wireless charger such as spigen?
Charkatak said:
My Priv is arriving tomorrow I will use your recommendation when I will be buying wireless charger... It is just when using the pad, the device is laying down instead of being vertical so I could see and read messages...
Click to expand...
Click to collapse
Yeah I like the stand up chargers as well so I can view things while working. Let me know if you find a good one that works well.
Sent from my STV100-1 using Tapatalk
dmband64 said:
Yeah I like the stand up chargers as well so I can view things while working. Let me know if you find a good one that works well.
Sent from my STV100-1 using Tapatalk
Click to expand...
Click to collapse
I just asked users on amazon if some of the chargers do work well with Priv. Will reply here if I get any answer. Have you tried to put your Priv in landscape on the wireless charger such as spigen? The reason I asked is because I read that some user had issues with some phones which would disconnect/re-connect, but when placed horizontally on the charger, all was well.
Charkatak said:
I just asked users on amazon if some of the chargers do work well with Priv. Will reply here if I get any answer. Have you tried to put your Priv in landscape on the wireless charger such as spigen? The reason I asked is because I read that some user had issues with some phones which would disconnect/re-connect, but when placed horizontally on the charger, all was well.
Click to expand...
Click to collapse
Yes it does wort of work. The problem is that the coil is so low on the Priv that it falls of when trying to put it on there horizontal. Same with the Nexus orb. It's kind of annoying. One solution with the spigen is to put something under the priv when it's on there horizontal so it meets up with the higher coil as the spigen has three coils.
Sent from my STV100-1 using Tapatalk
dmband64 said:
Yes it does wort of work. The problem is that the coil is so low on the Priv that it falls of when trying to put it on there horizontal. Same with the Nexus orb. It's kind of annoying. One solution with the spigen is to put something under the priv when it's on there horizontal so it meets up with the higher coil as the spigen has three coils.
Sent from my STV100-1 using Tapatalk
Click to expand...
Click to collapse
I saw 2 different Samsung chargers on amazon... Do you know the samsung charger's model # that you have described in one of your replies?
This is the one I have...
http://www.amazon.com/Samsung-EP-PG...1450725284&sr=8-3&keywords=samsung+qi+charger
dmband64 said:
This is the one I have...
http://www.amazon.com/Samsung-EP-PG...1450725284&sr=8-3&keywords=samsung+qi+charger
Click to expand...
Click to collapse
Do you know if the main difference is the "fast charging" and if Priv might benefit from the below charger vs yours?
http://www.amazon.com/Samsung-Fast-...8755&sr=1-9&keywords=samsung+wireless+charger
As far as I know the PRIV is not compatible with Fast Wireless Charging, but I'm not sure. The issue is simply the placement of the PRIV's wireless coil in the back of the phone. It's nearly at the very bottom of the phone so it doesn't align well with some wireless chargers. Most phones have the coil in the middle of the back.
dmband64 said:
As far as I know the PRIV is not compatible with Fast Wireless Charging, but I'm not sure. The issue is simply the placement of the PRIV's wireless coil in the back of the phone. It's nearly at the very bottom of the phone so it doesn't align well with some wireless chargers. Most phones have the coil in the middle of the back.
Click to expand...
Click to collapse
Looks like Fast Charging is for samsung phones. I found couple of interesting chargers which are vertical:
1) http://www.amazon.com/Wireless-Miko...636&sr=8-5&keywords=vertical+wireless+charger
2) http://www.amazon.com/Aukey-Wireles...636&sr=8-6&keywords=vertical+wireless+charger
I think I would get the first one....
Anyone tried the Samsung wireless charger? I was trying with the Samsung wireless charger for S6 but it doesn't work...
Just found out my device is STV100-3 which doesn't support wireless charging.... Darn darn darn..... Ahhhhhhhhh
It should work with any QI wireless charger, assuming you have a model with wireless charging built in.
UPDATE: Contrary to my previous posts...the spigen charger referenced in this thread DOES work with the PRIV. I tried it again last night with a different cable and charger and it does work perfectly. It must have been an issue with the cable and charger I was using with it previously not providing enough voltage or something. Sorry for the incorrect information.
Also, I can confirm it does work with the Samsung chargers, but the PRIV's coil is at the very bottom so you have to line up the very bottom of the phone onto the charger. Hope this helps.
dmband64 said:
It should work with any QI wireless charger, assuming you have a model with wireless charging built in.
UPDATE: Contrary to my previous posts...the spigen charger referenced in this thread DOES work with the PRIV. I tried it again last night with a different cable and charger and it does work perfectly. It must have been an issue with the cable and charger I was using with it previously not providing enough voltage or something. Sorry for the incorrect information.
Also, I can confirm it does work with the Samsung chargers, but the PRIV's coil is at the very bottom so you have to line up the very bottom of the phone onto the charger. Hope this helps.
Click to expand...
Click to collapse
Thanks for the update!
Moko Standup Charger
My priv has the official blackberry leather flip case, and I'm only interested in chargers that work with the phone in the case.
I just got the Moko stand up Qi charger a few days ago and it does NOT work reliably with the Priv in a case. It seems to work some of the time, but the night before last it charged to 60% and stopped. It's pretty easy to reproduce this behavior since it's never charged to 100%. One strange thing is that even when it only charged to 60%, it's pretty warm between the Priv and the stand. I know lipo lifetime is accelerated with heat, so I don't think using this, even if charges to 60% is a great idea..
I have a cheap square samsung charger that seems to work better, but you have to find the sweet spot.
I'm still looking for one that is 100%. Eventually, I want two, one for my desk and one for my car (air vent) but I'm definitely not going to try the Moko car version.
EDIT: I made shim (out of cardboard for now) to raise the phone up in the Moko dock by 1/2 inch. It charged to 100% for the first time! The phone is still pretty warm (about 94 degrees F) but that might be the way all of the Qi chargers work.
watsys said:
My priv has the official blackberry leather flip case, and I'm only interested in chargers that work with the phone in the case.
I just got the Moko stand up Qi charger a few days ago and it does NOT work reliably with the Priv in a case. It seems to work some of the time, but the night before last it charged to 60% and stopped. It's pretty easy to reproduce this behavior since it's never charged to 100%. One strange thing is that even when it only charged to 60%, it's pretty warm between the Priv and the stand. I know lipo lifetime is accelerated with heat, so I don't think using this, even if charges to 60% is a great idea..
I have a cheap square samsung charger that seems to work better, but you have to find the sweet spot.
I'm still looking for one that is 100%. Eventually, I want two, one for my desk and one for my car (air vent) but I'm definitely not going to try the Moko car version.
Click to expand...
Click to collapse
After I got my Priv, I am leaning towards this one, but have yet to decide:
http://www.amazon.com/Wireless-Miko...636&sr=8-5&keywords=vertical+wireless+charger
84281227 said:
Just about to get my Priv (FINALLY!), buying stuffs to armor it up - quick chargers, cases etc..
So here is the question: as there is no official wireless charger for Priv, which 3rd-party wireless charger available is best for it?
Click to expand...
Click to collapse
This Meenova wireless charging dock is another choice -- adjustable, drop & charge.
http://www.amazon.com/Ultimus-Wireless-Charging-Samsung-Galaxy/dp/B014QZCFOS/ref=sr_1_8?m=A3UZZ0M53CX865&s=merchant-items&ie=UTF8&qid=1452182613&sr=1-8
Why BB want to have two versions? One with wireless and one w/o.........
US users are more privileged, while others over the other half of the world are not as privileged? :crying: