Database Users

In need of urgent help with recovery-fastboot-droidboot corrupt zenfone 5 (a502cg)

Hello guys. I bricked my asus zenfone t00k (a502cg) after flashing a version of twrp custom recovery and factory resetting the device. Pc recognizes it as ISoc and cloverview when i install intel usb driver and ISoc driver. I can't enter recovery, fastboot or droidboot using combinations. Adb and fastboot do not recognize it either. The unbrick do not work, it gives windriver error (usb_bulk_read) error. I'm in urgent need of helping hands. Please sombody help me or those having the same device kindly extract dnx.bin, iwfi.bin, osdnx.bin and fastboot.pos.bin via adb commands and share them. Thanks in advance... please contact me via: [email protected]

RainyNight85 said:
Hello guys. I bricked my asus zenfone t00k (a502cg) after flashing a version of twrp custom recovery and factory resetting the device. Pc recognizes it as ISoc and cloverview when i install intel usb driver and ISoc driver. I can't enter recovery, fastboot or droidboot using combinations. Adb and fastboot do not recognize it either. The unbrick do not work, it gives windriver error (usb_bulk_read) error. I'm in urgent need of helping hands. Please sombody help me or those having the same device kindly extract dnx.bin, iwfi.bin, osdnx.bin and fastboot.pos.bin via adb commands and share them. Thanks in advance... please contact me via: [email protected]
Click to expand...
Click to collapse
Try this A502CG Debrick Secure
https://drive.google.com/file/d/0B0AFmAAcGS5xaVlMRUoxRGpndkk/view?usp=drivesdk
Sent from my ASUS_T00F using XDA-Developers mobile app

Has it been tested and proven to work with a502cg? Thanks by the way. I'm gonna give it a try and let you know about the result.

Dear member,
Brother, shall I change the sbin extension to bin? Xfstk asks for bin extension?

Dear member,
Brother, shall I change the sbin extension to bin? Xfstk asks for bin extension?

RainyNight85 said:
Brother, shall I change the sbin extension to bin? Xfstk asks for bin extension?
Click to expand...
Click to collapse
How you use that? With xfstk?
1. Power off your phone.
2. Press and hold vol down
3. Connect to pc, it will detect cloverview
4. Release vol down.
5. Extract a502cg debrick secure to adb folder, and run sec_xfstk.bat. it will load fastboot temporary.
In your adb must have boot, recovery and fastboot imgs.
6. Adb cmd run
fastboot flash boot boot.img
fastboot flash fastboot fastboot.img
fastboot flash recovery recovery.img
fastboot reboot-bootloader
Hope it work
Sent from my ASUS_T00F using XDA-Developers mobile app

Thanks
Thanks a lot, but the thing is device is not recognized by adb/fastboot, so this pack will still flash fastboot and recovery?

RainyNight85 said:
Brother, shall I change the sbin extension to bin? Xfstk asks for bin extension?
Click to expand...
Click to collapse
For use with xfstk yes you have to rename them
Sent from my ASUS_T00F using XDA-Developers mobile app

Thank you so much
Thanks a lot bro. I'm gonna try my chances and get back to you soon.

One last thing to ask: shall I use recovery, fastboot of the version 2.21.40.29?

RainyNight85 said:
Thanks a lot bro. I'm gonna try my chances and get back to you soon.
Click to expand...
Click to collapse
I think you already have complete debrick folder before. Here is the complete folder, just exctract to any folder, put boot, fastboot and recovery imgs. Now run sec_xfstk.bat
After your phone detected do adb cmd.
Here the complete debrick for a502cg
https://drive.google.com/file/d/0B0AFmAAcGS5xRllXa3dET1YyOHc/view?usp=drivesdk
Sent from my ASUS_T00F using XDA-Developers mobile app

Brother, still the same. İ run sec_xfstk nothing pops up, no command prompt window at all. When i type adb devices, it only states list of devices attached. What do you think have i done wrong?

RainyNight85 said:
Brother, still the same. İ run sec_xfstk nothing pops up, no command prompt window at all. When i type adb devices, it only states list of devices attached. What do you think have i done wrong?
Click to expand...
Click to collapse
What current firmware your phone now?
Sent from my ASUS_T00F using XDA-Developers mobile app

paktepu said:
What current firmware your phone now?
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Dont know exactly, but something ending with 53 i think.

RainyNight85 said:
Dont know exactly, but something ending with 53 i think.
Click to expand...
Click to collapse
1. Make sure isocusb driver installed. Get .53.zip from asus web. Extract it and get recovery.img, fastboot/droidboot.img and boot.img put into a folder name it a502cg.
2. Extract a502cg debrick.rar form my last link i sent to you, put them all together in a502cg folder.
3. Power off your phone. Press and hold vol down, connect it to pc. It will detect as cloverview. Now release vol down. Usb logo will show up.
4. Click xsftk.bat. Droidboot will load temporary to your phone.
5. Now open adb cmd in a502cg folder and run cmd.
Sent from my ASUS_T00F using XDA-Developers mobile app
---------- Post added at 18:21 ---------- Previous post was at 18:10 ----------
RainyNight85 said:
Thanks a lot, but the thing is device is not recognized by adb/fastboot, so this pack will still flash fastboot and recovery?
Click to expand...
Click to collapse
Yes adb will not recognize your phone, since we are on cloverview mode. After your run xsftk.bat droidboot will load to your phone temporary. Now your phone will recognize by adb. Then run adb cmd.
Sent from my ASUS_T00F using XDA-Developers mobile app
---------- Post added at 18:22 ---------- Previous post was at 18:21 ----------
RainyNight85 said:
One last thing to ask: shall I use recovery, fastboot of the version 2.21.40.29?
Click to expand...
Click to collapse
Any firmware can be use to this debrick. We just need the img inside, to recover your broken recovery
Sent from my ASUS_T00F using XDA-Developers mobile app

Reply
Should the img file of an version work?

RainyNight85 said:
Should the img file of an version work?
Click to expand...
Click to collapse
Yes it work, but make sure it from the original stock
Sent from my ASUS_T00F using XDA-Developers mobile app

Sure it is
İts stock. Downloaded from asus official website. İt saw device after pressing vol down as cloverview and isoc, but no usb logo appeared?

RainyNight85 said:
İts stock. Downloaded from asus official website. İt saw device after pressing vol down as cloverview and isoc, but no usb logo appeared?
Click to expand...
Click to collapse
Click xstk.bat
Sent from my ASUS_T00F using XDA-Developers mobile app

Alreasy did, error occured. Let me give you the log file

HUAWEI P8lite stuck at Huawei logo... Help plz !

So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS

Xil0s said:
So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS
Click to expand...
Click to collapse
You need to wait 20 minutes after updating from sdcard.

Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
k i'll try again

Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
Don't work ;(

Xil0s said:
Don't work ;(
Click to expand...
Click to collapse
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.

Suleiman01 said:
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.
Click to expand...
Click to collapse
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.

Xil0s said:
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.
Click to expand...
Click to collapse
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.

Suleiman01 said:
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.
Click to expand...
Click to collapse
I can't get into fastboot and rescue mode but when I plug it into the compute, it charges. I didn't flashed any custom recovery :/

[Question] [Hardbricked OPT] One plus logo visible but No display after boot.

Hello people I actually Hardbricked my one plus two can't even say a hard brick but main problem is phone boots into the system but nothing is visible not even recovery is visible where as the boot logo and Fastboot mode page is visible... The current situation is :-
1. FASTBOOT ACCESSIBLE
2. BOOTLOADER LOCKED( can't unlock it because oem unlock is disabled)
3. Phone boots into system.. Internal storage is visible when connected to pc and can take screen shots using volume keys n viewed those screen shots from internal storage which shows that phone is currently on welcome page..
4. Phone vibrates when setting it to vibrate mode using volume keys
5.Tried qualcomm recovery tool n all 4 methods (except method 2 because link is broken) form @Naman Bhalla from one plus form mega guide but didn't work for me
6. Waiting for help
I would request developers or anyone how knows solution to please help me out...

Hi
Try this...
1. Reboot the phone to the bootloader (fastboot)
2. Connect phone to PC an run command
Code:
fastboot devices
to see if detected.
3. Run this command to wipe data/factory reset
Code:
fastboot -w
Hope it helped
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
Hi
Try this...
1. Reboot the phone to the bootloader (fastboot)
2. Connect phone to PC an run command
Code:
fastboot devices
to see if detected.
3. Run this command to wipe data/factory reset
Code:
fastboot -w
Hope it helped
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Will try this n will get back to you.. ?

Brandon Indar said:
Hi
Try this...
1. Reboot the phone to the bootloader (fastboot)
2. Connect phone to PC an run command
Code:
fastboot devices
to see if detected.
3. Run this command to wipe data/factory reset
Code:
fastboot -w
Hope it helped
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Didnt work for me ..m getting the error..

OK u say that u can boot into system but nothing is visible...if u boot into system an connect to pc, do u have access to adb?
Btw have u ever rooted or flash custom recovery like twrp before?
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
OK u say that u can boot into system but nothing is visible...if u boot into system an connect to pc, do u have access to adb?
Btw have u ever rooted or flash custom recovery like twrp before?
Click to expand...
Click to collapse
I haven't rooted it no custom recovery.. When typed adb devices it shows
List of adb devices
(blank)
I can access internal storage once connected with pc..

U can take screenshots an view it on ur pc?
If so u can try navigate to settings an enable OEM unlock by viewing the screenshots[emoji3]
Songs weird but that's only way since u hav no adb access[emoji13]
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
U can take screenshots an view it on ur pc?
If so u can try navigate to settings an enable OEM unlock by viewing the screenshots[emoji3]
Songs weird but that's only way since u hav no adb[emoji13]
Click to expand...
Click to collapse
Buddy since I tried to flash using qualcomm tools it flashed a new system ( with no display) so now it's currently on the welcome page n I can't go ahead.. I can't navigate using touch because screen is blank..
Just wanted to ask if I flash a rom with oem unlock enabled before hand then will I be able to unlock bootloader?

Have u tried this http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449
There's not much u can do since u don't have adb access and ur bootloader is locked.
All I can say is to try different recovery packages an hope it work [emoji106]
Sent from my ONE A2005 using Tapatalk

Manish Salian said:
Just wanted to ask if I flash a rom with oem unlock enabled before hand then will I be able to unlock bootloader?
Click to expand...
Click to collapse
Yes...
But normally any rom u flash, u will still have to go in settings an enable it.
The only way u can flash rom is via the recovery tool. The recovery tool also installs twrp recovery. Since ur bootloader is locked it probably brick the recovery.
If u get a rom to boot successfully proceed in unlocking the bootloader.
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
Have u tried this http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449
Click to expand...
Click to collapse
I have tried this but same story.. It boots but display isn't visible.. ?

Manish Salian said:
I have tried this but same story.. It boots but display isn't visible.. ?
Click to expand...
Click to collapse
Well lastly try booting into fastboot then run the command " fastboot continue " and see if u can boot into recovery.
If not well u will have to replace the system.img and boot.img in the recovery tool with another rom.
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
Well lastly try booting into fastboot then run the command " fastboot continue " and see if u can boot into recovery.
If not well u will have to replace the system.img and boot.img in the recovery tool with another rom.
Click to expand...
Click to collapse
Yeah will try to replace system n boot.img with different roms.. Will let you know..

Check out this: http://android.stackexchange.com/questions/164052/no-os-installed-stock-recovery-oneplus-2
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
Check out this: http://android.stackexchange.com/questions/164052/no-os-installed-stock-recovery-oneplus-2
Click to expand...
Click to collapse
But buddy his bootloader is unlocked where as mine is locked :crying:

Did you wipe data partition? No one told you that before, so I'm curious. Do it from recovery (you didn't tell your recovery is dead, so...).
Had this issue, when I forgot to wipe data after switching roms.

turai said:
Did you wipe data partition? No one told you that before, so I'm curious. Do it from recovery (you didn't tell your recovery is dead, so...).
Had this issue, when I forgot to wipe data after switching roms.
Click to expand...
Click to collapse
Buddy when I boot into recovery nothing is visible but it vibrates if I use volume or power keys

Manish Salian said:
But buddy his bootloader is unlocked where as mine is locked :crying:
Click to expand...
Click to collapse
No download the zip and use the system.img from it in the link and replace it in the recovery tool...Ik fastboot is locked.
Here is direct link https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
No download the zip and use the system.img from it in the link and replace it in the recovery tool...Ik fastboot is locked.
Click to expand...
Click to collapse
Okaay will try it n will let you know..

Manish Salian said:
Buddy when I boot into recovery nothing is visible but it vibrates if I use volume or power keys
Click to expand...
Click to collapse
If recovery does the same, this is a hardware issue.
I guess you are from India, so take your device to a service center. In case your warranty has expired, go for the 3T, replacing the mainboard does not worth the money.

My lenovo a6000 is hard bricked. PC not detecting it.

Hello all, I have a Lenovo a6000 smartphone. It was owned by my friend. She had a problem with the android os, so she went to a local store and the there it got hard bricked. Now if I turn it on it only vibrates once. no backlight or any picture. If I press and hold vol- and power buttons together LCD backlight turns on but no display. then it goes off and then again turns on. PC does not detect it. Can anyone help me getting it out from this state?

arnab8820 said:
Hello all, I have a Lenovo a6000 smartphone. It was owned by my friend. She had a problem with the android os, so she went to a local store and the there it got hard bricked. Now if I turn it on it only vibrates once. no backlight or any picture. If I press and hold vol- and power buttons together LCD backlight turns on but no display. then it goes off and then again turns on. PC does not detect it. Can anyone help me getting it out from this state?
Click to expand...
Click to collapse
Try qfil method

JovanSijacki said:
Try qfil method
Click to expand...
Click to collapse
Can you give the link please..... please note the phone is no longer detected in pc

arnab8820 said:
Can you give the link please..... please note the phone is no longer detected in pc
Click to expand...
Click to collapse
You need to have adb and fastboot drivers for your phone to correctly get detected.
Here's the LINK FOR QFIL TUTORIAL. You'll need another set of drivers called as the QCOM drivers which are mentioned in the tutorial from the above link.
Hope this helps.

I already have installed the drivers. Still not detected. Even the device manager does not show a device is connected

sasukay said:
You need to have adb and fastboot drivers for your phone to correctly get detected.
Here's the LINK FOR QFIL TUTORIAL. You'll need another set of drivers called as the QCOM drivers which are mentioned in the tutorial from the above link.
Hope this helps.
Click to expand...
Click to collapse
Here the phone connects in Qualcomm hs-USB...... mode. But in case of mine, it does not even show up in the device manager.

arnab8820 said:
Here the phone connects in Qualcomm hs-USB...... mode. But in case of mine, it does not even show up in the device manager.
Click to expand...
Click to collapse
You should try changing the usb cable you are using. Or maybe that guy in the local repair shop didn't put the sub PCB board back correctly.

sasukay said:
You should try changing the usb cable you are using. Or maybe that guy in the local repair shop didn't put the sub PCB board back correctly.
Click to expand...
Click to collapse
There is only one pcb in it. Changing the cable does not make a difference

One update. I can get into the fastboot mode. But the bootloader is locked. What to do?

arnab8820 said:
One update. I can get into the fastboot mode. But the bootloader is locked. What to do?
Click to expand...
Click to collapse
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
Code:
fastboot devices
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful​, type in
Code:
fastboot flash recovery recovery.img
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.

sasukay said:
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful​, type in
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
Click to expand...
Click to collapse
Thanks! I will try it and post the results.
Btw are you sure it does not come with a locked bootloader? I tried to flash the stock recovery and got an error saying "unknown command or device is lock"

arnab8820 said:
Thanks! I will try it and post the results.
Btw are you sure it does not come with a locked bootloader? I tried to flash the stock recovery and got an error saying "unknown command or device is lock"
Click to expand...
Click to collapse
Yeah bro I'm 100% positive. I think unknown command is displayed when you flash the wrong version of recovery.
You can also​ try
Code:
fastboot boot recovery.img
Sometimes only this works which temporarily boots into the custom recovery.

sasukay said:
Yeah bro I'm 100% positive. I think unknown command is displayed when you flash the wrong version of recovery.
You can also​ try
Sometimes only this works which temporarily boots into the custom recovery.
Click to expand...
Click to collapse
Ok friend i will post the results tonight

sasukay said:
Lenovo A6000 doesn't come with a locked bootloader B-l
If you can boot into fastboot then you should flash twrp from it depending on the current android version of the device. If it had been on kitkat flash this TWRP v2.8.6.0 or if it has been updated to lollipop then flash the latest TWRP v3.1.0.
For this you need to first have the fastboot drivers installed and also the minimal adb and fastboot tool. Then place the required TWRP in that folder, better rename the file to 'recovery.img' and then in the CMD window which you open by Shift + Right Click first type
Code:
fastboot devices
To check whether your device is detected by the tool and haa got drivers installed correctly.
Later, if successful​, type in
Code:
fastboot flash recovery recovery.img
Then you'll have TWRP recovery installed.
Then flash any ROM on the device using it.
Click to expand...
Click to collapse
Tried the above method but no luck it gives an error: "unknown command or device is lock".

arnab8820 said:
Tried the above method but no luck it gives an error: "unknown command or device is lock".
Click to expand...
Click to collapse
Try this with the CWM recovery too.
BTW does your device gets detected by fastboot devices command? Also, have you tried the QPST method?

sasukay said:
Try this with the CWM recovery too.
BTW does your device gets detected by fastboot devices command? Also, have you tried the QPST method?
Click to expand...
Click to collapse
Device gets detected by fastboot devices command. I cant try qpst because the device is not detected in any other mode except fastboot. I hv all the drivers installed

arnab8820 said:
Device gets detected by fastboot devices command. I cant try qpst because the device is not detected in any other mode except fastboot. I hv all the drivers installed
Click to expand...
Click to collapse
You've tried booting into Download mode? It requires you to press the VOL UP + POWER KEY, then you need to select the Download mode in it to perform flashing through QPST.
Also, you never mentioned what android version was the device on, earlier.

sasukay said:
You've tried booting into Download mode? It requires you to press the VOL UP + POWER KEY, then you need to select the Download mode in it to perform flashing through QPST.
Also, you never mentioned what android version was the device on, earlier.
Click to expand...
Click to collapse
If i press and hold vol up and power key together the phone only vibrates once and shows nothing. And i think my friend applied the lollipop update on it. She is not sure.

arnab8820 said:
If i press and hold vol up and power key together the phone only vibrates once and shows nothing. And i think my friend applied the lollipop update on it. She is not sure.
Click to expand...
Click to collapse
Try fastboot oem unlock

arnab8820 said:
Tried the above method but no luck it gives an error: "unknown command or device is lock".
Click to expand...
Click to collapse
I think you are missing something (maybe).
The command is "fastboot flash recovery recovery.img"
If the recovery files name is twrp.img then command will be "fastboot flash recovery twrp.img".

No Fastboot No Recovery Bricked

Hey guys My redmi 2 has bricked
No fastboot no recovery hang on mi logo
I am on aex ROM
Plz help in bringing my phone back

How did it happened?
What you did with your device before it get bricked?
Please elaborate your story.

I just flash stock rom with mi flash tool and after flashing phone gets hang on mi logo
No recovery No fastboot just hang on mi logo

did u try remove battery and boot into fastboot mode?

AKHILR4J said:
did u try remove battery and boot into fastboot mode?
Click to expand...
Click to collapse
Yes i tried but no luck

I think it is a hardware problem,i saw many cases like this,u should get into recovery when u remove the battery if not that's hardware problem only,,,

Thanks for all to rply
Got the solution and unbricked my device

jatintomar said:
Thanks for all to rply
Got the solution and unbricked my device
Click to expand...
Click to collapse
how?

Use a pc...boot phone into fast boot mode (remove the battery..insert again..vol down and power buttom to fastboot...if not showing any symbol ( blank) it usually will be in fastboot mode with a firmware corrupted...but it will connect to fast boot in pc)...connect it...make sure adb drivers are installed on the pc...download twrp.img for redmi 2...open cmd...hold shift and right click on the file of that twrp...select copy path... In cmd type " fastboot flash recovery (space) (crtl v) (enter)...after successful flash remove battery...insert it press all 3 buttons (vol up down, power key)....voilà ur booted with twrp.

AKHILR4J said:
how?
Click to expand...
Click to collapse
By test point method

jatintomar said:
By test point method
Click to expand...
Click to collapse
Can you please elaborate this? I am stuck with a similar problem.

aviaryan said:
Can you please elaborate this? I am stuck with a similar problem.
Click to expand...
Click to collapse
See this video https://m.youtube.com/watch?v=SBrjho2nziQ
Or read this tutorial
http://en.miui.com/thread-100553-1-1.html