Hi,
Got a Redmi2 2014813 2GB version but I've noticed an App I don't recognise and can't find details Googling.
go2ReachSrv com.go2.reach.mayi
Does anyone know what this thing is, it's not on my other Redmi2 version 2014817 1GB!
Cheers,
Mark
Related
Hey..
This topic is a question about XOLO Q800, but i didn't found any other categories to post this.
Sorry for my bad english.
So..my problem is..:
Recently, I bought a new phone and the rom that is has it's a little bit bad..
The phone is a XOLO Q800 wich in Romania, where I live, is called Allview P5 Quad.
So.. I don't like the ROM and I want to flash another one.
But, now comes the problem: when I try to flash any ROM, the IMEIs (IMEIs because it is a dual sim phone) are lost..
So, does anyone have an idea or a fix for this problem?
I have CWM recovery and root access.
Thank you
Have a nice day. :3
Use mtk tools to write imei
Sent from my Q3000 using XDA Free mobile app
Hi all,
Sorry if my question has already had an answer, but I did'nt find any thread related to my problem.
I just bought a dual sim Note 4 in China, but the only languages available are chinese, english and korean.
Do you think it possible for me to flash a french ROM for a single sim Note 4 ?
Thanks for helping me.
Merovee said:
Hi all,
Sorry if my question has already had an answer, but I did'nt find any thread related to my problem.
I just bought a dual sim Note 4 in China, but the only languages available are chinese, english and korean.
Do you think it possible for me to flash a french ROM for a single sim Note 4 ?
Thanks for helping me.
Click to expand...
Click to collapse
It depends on the hardware. CPU?? Modem?? I dont think it would work without port.
What's you model number? and the model number of the french rom.
You can check here if they uses the same modem http://forum.xda-developers.com/note-4/general/modem-hardware-versions-n910-list-t2926782
If it does install on your chinese dual sim phone, you will lose functionality on the second sim.
Sent from my SM-N9100 using XDA Free mobile app
Ok, thanks, that's what I was afraid of.
For information, the baseband of my SM-N9100 is : N9100ZCU1ANJ3
CPU : Qualcomm SnapDragon
Don't know where to find the Modem version.
Merovee said:
Ok, thanks, that's what I was afraid of.
For information, the baseband of my SM-N9100 is : N9100ZCU1ANJ3
CPU : Qualcomm SnapDragon
Don't know where to find the Modem version.
Click to expand...
Click to collapse
Youre using Qualcomm Gobi MDM9x25M or MDM9x35M
N910F, N910G, N9106W, N9100 uses the same modems.
Roms from N910F, N910G, N9106W, N9100 may work, only with 1 sim
Ok. Since I need 2 sim cards, I have no choice.
Hope a french ROM for my phone will be released one day.
I am a beginner in matter of phone customization.
Is it easy to implement the possibility to create a google account in chinese Note 4 (chinese phones don't allow it) ?
I heard about Gapps, but I read that one can only install it with a new ROM.
I just need to connect with my google account and access Google Play.
My phone is rooted, thanks to CF Auto-root.
I don't know if it is possible, but you can try installing the Hong Kong version ROM of N9100, My phone is HK ver. N9100 it comes with Google apps pre installed and does not have the Chinese bloatwares.
There is a thread about this. Here is the link.
http://forum.xda-developers.com/showthread.php?t=2956342
Sent from my SM-N9100 using XDA Free mobile app
Fine, I installed the HK version and it comes with all languages, french included.
I had to use Odin to flash the Rom.
Seems to work perfectly by now.
Thanks for you help.
Good to hear that it worked, if you want root, you can use Chainfire's autoroot for N9100 china ver. It rooted my phone without any problem.
Sent from my SM-N9100 using XDA Free mobile app
Help pls//
Merovee said:
Hi all,
Sorry if my question has already had an answer, but I did'nt find any thread related to my problem.
I just bought a dual sim Note 4 in China, but the only languages available are chinese, english and korean.
Do you think it possible for me to flash a french ROM for a single sim Note 4 ?
Thanks for helping me.
Click to expand...
Click to collapse
Can you give me the dump of your dual sim note 4? Please?
Hello
Is there any way to check if my phone is Xiaomi Redmi 2 2014811 (with WDCMA 900MHz) or it is 2014813 (no WDCMA 900MHz)?
The sticker on box of my phone says 2014811 and so is sticked under phone battery BUT when i connect my phone to MiPcSuite it tells me its 2014813 this is unconclusive.
Im looking for a definitive way to determine if my phone is 2014811 with WDCMA 900MHz or its 2014813 without WDCMA 900MHz. Is there method to check if for example from inside phone, device settings, about phone, checking hardware status and modem number? Or is there something in Engineering Menu *#*#6484#*#* that will tell me what type of modem do i have?
May app like CPUZ or maybe other can look into hardware to find this information?
is your device rooted? You can check it in your device's build.prop.
twistergear said:
is your device rooted? You can check it in your device's build.prop.
Click to expand...
Click to collapse
You are correct!
KonradIC13 said:
Hello
Is there any way to check if my phone is Xiaomi Redmi 2 2014811 (with WDCMA 900MHz) or it is 2014813 (no WDCMA 900MHz)?
The sticker on box of my phone says 2014811 and so is sticked under phone battery BUT when i connect my phone to MiPcSuite it tells me its 2014813 this is unconclusive.
Im looking for a definitive way to determine if my phone is 2014811 with WDCMA 900MHz or its 2014813 without WDCMA 900MHz. Is there method to check if for example from inside phone, device settings, about phone, checking hardware status and modem number? Or is there something in Engineering Menu *#*#6484#*#* that will tell me what type of modem do i have?
May app like CPUZ or maybe other can look into hardware to find this information?
Click to expand...
Click to collapse
If you don't mind me asking, is your phone brand new or refurbished? Because whatever model number indicated on the box and at the back sticker of your phone it should match the phone's hardware. Unless the phone has a custom rom. What does windows os tell you (model#) when you connect it via usb? You're suppose to get two (2) drives when you connect it to your computer like for example: (drive letter) E: Xiaomi and (drive letter) F: 2014817.
eyeyousee said:
You are correct!
If you don't mind me asking, is your phone brand new or refurbished? Because whatever model number indicated on the box and at the back sticker of your phone it should match the phone's hardware. Unless the phone has a custom rom. What does windows os tell you (model#) when you connect it via usb? You're suppose to get two (2) drives when you connect it to your computer like for example: (drive letter) E: Xiaomi and (drive letter) F: 2014817.
Click to expand...
Click to collapse
Phone is supposed to be new but seller was flashing it with other firmware (because in original its with chineese firmware). Im adding some more information that i got from the phone (Translated as best as i could)
Settings -> Information about phone:
Device name: Redmi
Model number: HM 2LTE-CMCC
Android Version: 4.4.4 KTU84P
Android security level: 2016-06-01
MIUI Version: MIUI 7.4 by xiaomi.eu 6.5.25 (developed)
CPU: 4x1,2GHz
RAM: 2,00GB
Internal memory: Avaliable 13,13GB, Total 16,00GB
Modem: MPSS.DPM.1.0.c7.18-00024-M8916EAAAANUZM-1-a1v18
Kernel version: 3.10.28-g65c27a9
Android base: KTU84P
From device status "Serial number" d4b60ce
From engineering mode:
Software version: SW_S8647A1_V060_M22_MP_XM
Hardware version: M22
This is from under battery, on the blue sticker with Hanzi it says:
02-B041-143469
2014811
79T24424N2NA475
And below
2014811 TD-LTE<Hanzi symbols>
CMIIT ID: 2014CP5147
<Hanzi symbols>
When i connect it to computer the device name is 2014813 (just as MiPcSuite says).
Generally im asking this, because im having "No signal" issue (phone detects sim card but no signal, 0 bars). In my country WDCMA 900MHz is nessesary. And seller promised me that he will sell me 2014811 version (with WDCMA 900MHz). So now, MiPcSuite tells me that its 2014813 and i have this no signal issue. And im worried that someone sold me wrong 2014813 version (without WDCMA900Mhz).
And before i ship my phone back to seller, im trying to figure out what is wrong, is my phone really 2014813 and i have no signal because of lack of WDCMA900MHz. Or maybe its just that MiPcSuite sees its as 2014813 because someone flashed me wrong rom, and thats why there is no signal (wrong modem file) and my phone is 2014811 for real (like it says under battery and on box).
KonradIC13 said:
Phone is supposed to be new but seller was flashing it with other firmware (because in original its with chineese firmware).
Generally im asking this, because im having "No signal" issue (phone detects sim card but no signal, 0 bars). In my country WDCMA 900MHz is nessesary. And seller promised me that he will sell me 2014811 version (with WDCMA 900MHz). So now, MiPcSuite tells me that its 2014813 and i have this no signal issue. And im worried that someone sold me wrong 2014813 version (without WDCMA900Mhz).
And before i ship my phone back to seller, im trying to figure out what is wrong, is my phone really 2014813 and i have no signal because of lack of WDCMA900MHz. Or maybe its just that MiPcSuite sees its as 2014813 because someone flashed me wrong rom, and thats why there is no signal (wrong modem file) and my phone is 2014811 for real (like it says under battery and on box).
Click to expand...
Click to collapse
You can use CPUZ, Antutu or even Geekbench to get some details. 2014813 is a Chinese Rom that's why you can't get any signal from your place.
Flash your phone with this release of MIUI 6: http://forum.xda-developers.com/redmi-2/how-to/rom-stock-kitkat-miui-6-fastboot-rom-t3375693 and you should be good to go. It has the global modem firmware. After that you can put CM 13 on it
KonradIC13 said:
Phone is supposed to be new but seller was flashing it with other firmware (because in original its with chineese firmware). Im adding some more information that i got from the phone (Translated as best as i could)
Settings -> Information about phone:
Device name: Redmi
Model number: HM 2LTE-CMCC
Android Version: 4.4.4 KTU84P
Android security level: 2016-06-01
MIUI Version: MIUI 7.4 by xiaomi.eu 6.5.25 (developed)
CPU: 4x1,2GHz
RAM: 2,00GB
Internal memory: Avaliable 13,13GB, Total 16,00GB
Modem: MPSS.DPM.1.0.c7.18-00024-M8916EAAAANUZM-1-a1v18
Kernel version: 3.10.28-g65c27a9
Android base: KTU84P
And before i ship my phone back to seller, im trying to figure out what is wrong, is my phone really 2014813 and i have no signal because of lack of WDCMA900MHz. Or maybe its just that MiPcSuite sees its as 2014813 because someone flashed me wrong rom, and thats why there is no signal (wrong modem file) and my phone is 2014811 for real (like it says under battery and on box).
Click to expand...
Click to collapse
Ok your phone turned out to be a Chinese (2014811 China Unicom) version according to this MIUI Link and in order to get the WDCMA900MHz signal you need to flash (via update.zip or adb) the 2014811 ROM.
Thanks everyone, with your help and generally pointing me in right direction problem was solved.
I managed to flash my phone with proper 2014811 rom. There were two problems, first installing ADB drivers, had to do it manually instead of using MiFlash installer.
Second problem was "Image and device mismatch" error in MiFlash which was solved with this guide http://en.miui.com/thread-178314-1-1.html
After that, proepr 2014811 wt88047 rom flashed, signal is back, all good
KonradIC13 said:
Thanks everyone, with your help and generally pointing me in right direction problem was solved.
After that, proepr 2014811 wt88047 rom flashed, signal is back, all good
Click to expand...
Click to collapse
Glad to hear that! I guess you saved a lot of time and money now?! Cheers!
KonradIC13 said:
Thanks everyone, with your help and generally pointing me in right direction problem was solved.
I managed to flash my phone with proper 2014811 rom. There were two problems, first installing ADB drivers, had to do it manually instead of using MiFlash installer.
Second problem was "Image and device mismatch" error in MiFlash which was solved with this guide http://en.miui.com/thread-178314-1-1.html
After that, proepr 2014811 wt88047 rom flashed, signal is back, all good
Click to expand...
Click to collapse
can u tell me which proper rom for 2014811 that fix your problem??
and how you flash it manually without miflash...?
i am having simcard no service problem, imei is present and the phone can detect simcard plug in, but cannot have signal at all...it just said no service
I can't find that model anywhere. I only see the 6/64 version out there.
Any help is much appreciated.
one_self said:
I can't find that model anywhere. I only see the 6/64 version out there.
Any help is much appreciated.
Click to expand...
Click to collapse
It seems nobody have it in stock not even Aliexpress website. I saw Fastcardtech.com sold 1700 pieces of 128GB, may be you ask when they in stock again if you can wait for it.
Could anyone help me to get the firmware of YB-X90L (yoga book 1st generation android LTE version)
the only place I could find the rom is easy-firmware, but unfortunately it's paid, I didn't have a premium account.
the following rom is what I want:
YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW-flashfiles.zip​Although it's not "exclusive" but actually it's need pay to download, free account doesn't works.
BTW, could anyone tell me the difference between WW08 and WW06 firmware.
Currently my installed ROM is YB1-X90L_USR_S110085_1710170829_WW08_EP_ROW_SD.zip
the problem I want to resolve is the LTE connect issue with China Telecom , currently version ROM says "no service" with China Telecom SIM card, but actually I know it's support, so I'm wondering if it's resolved by install another rom (WW06 bs WW08)
of course it's should be great if anyone can help to resolve the LTE connect issue by just make some configurations on existing OS.
Many thanks.
BTW: I have see someone else could use China Telecom 4G LTE with X90L model