Related
Hello!
I bought my mom an inexpensive S4 and it came with Orange wireless service provider and it's in French out for the box.
It's having some problem suck as MMS issues and all that, not to mention it's just being a pain in the butt to work with.
I want to flash the stock AT&T ROM to it ASAP so she will stop yelling at me about it, but I can't seem to find a copy around here. Maybe I'm just looking in the wrong areas, but I would appreciate some help locating it, thanks!
Also, it's been a while since I have done any ROM changes, so maybe showing me how they do it now would be helpful as well, thanks.
-Dave M.
AT&T ROMs cannot be installed on your phone. Odin will reject it at best, and you could hard brick the S4.
Unlock the phone by using the service menu exploit, RegionLock Away, or by purchasing an unlock code. Once the S4 is unlocked, you can install an unbranded firmware in place of the Orange-branded firmware. Keep in mind that this phone will never get LTE in the states as the frequencies are different.
Yes, I was made aware of the no 4G, no LTE issue with using a European phone by the guy who didn't know what he was doing when he programmed in the wrong APN settings at the AT&T corporate store...
Supposedly, the company I bought it off said this phone was unlocked already, so what then? It's been about 2 years since I did anything with ROMs, so I might be a little out of the know about the new stuff, thanks.
If it's already unlocked, then you can install any I9505 stock ROM you want. Download this ROM from Sammobile and follow the instructions on that page to install it. It's UK firmware so at the language prompt it will default to English. Be aware that you may have to flash the ROM twice before the S4's wireless radios function properly.
If everything goes as expected the APN should be automatically set. If not there are tutorials all over the place on adding an APN.
EDIT: Download the drivers from Samsung's website if not included in the Odin download on Sammobile. You'll need to have them installed for Odin to function.
Thanks. Now, how can I check to make sure this one is unlocked? Service mode is weird, because I had to do the Q followed by 0000 in key input to get it to give me the menu...
Put your Mom's AT&T SIM into the phone. If it asks for an unlock code then the S4 is still carrier locked.
Oh, okay. It's been working for like 2 months like this, lol.
Aren't there still a few carriers that aren't blocked for other regions? I just want to be sure, absolutely. I just want to know if there's another way to check.
Since it was Orange by origin (and those guys tend to lock stuff) I would say you would NOT be able to run AT&T on it as well (Orange ONLY lock - not really region lock)
When you say AT&T works I would assume previous owner already did what was needed and unlocked this device.
Sounds solid, thanks a bunch, fellas.
I just really wish there were a touchwiz ROM from AT&T for this particular model...
No, no you don't. If anything, you have it far easier by not having AT&T firmware. Unless of course you happen to LIKE encrypted (i.e. locked) bootloaders. AT&T and Verizon lock their bootloaders, which makes the simple things like rooting, bloatware removal, and custom ROMs far more difficult, and in some cases bordering on the impossible.
Your Mom may not give a damn, but by not having to deal with the headache of a locked bootloader you've made your life easier.
I've dealt with several so-called finished custom roms, such as the likes of such as Cyanogenmod and others, and lets just say they aren't quite as solid as the stuff that the phone comes with.
There's always something that doesn't work like it's supposed to or some important app that won't work somehow. Last time, I went with a stock rom, custom recovery (I like TWRP) and rooted the device and it ran just like I wanted. SO yeah, I'd like to use a stock touchwiz rom for the US if it's available somewhere.
I understand not wanting to toss a custom ROM on the phone, but that wasn't the point of my post. The ROM I prompted you to download several posts upthread is a stock Touchwiz ROM. In fact, up until this morning it was the same ROM I was using on my O2 I9505 that I'm using here in the US. As the I9505 is not available and never will be available from a carrier in the United States, there will never be a US ROM available for this phone. The ROM I had you download, unlike the AT&T ROM, has no carrier branding of any kind, no carrier bloatware, and no locked bootloader. As a result, you don't have the carrier meddling around with the ROM and making the experience worse by having crud added.
My point is, bluntly, that you're far better off now than you would be with an AT&T device. So, hopefully, now that you got everything sorted out your Mom can enjoy the phone.
Hi everyone. I am attempting to download the stock firmware for my Edge but can't find it. My phone has SM-G935A printed on the back. It is AT&T. The search feature on SAMMOBILE does not have that model. Is it ok to use a different firmware? It won't be AT&T anymore if I do, right?
The back of my phone gets really hot at times, especially right while booting. I wanted to try to root and put one of the custom ROMS on there but I am not doing anything till I find the correct Stock Firmware.
scm37390 said:
Hi everyone. I am attempting to download the stock firmware for my Edge but can't find it. My phone has SM-G935A printed on the back. It is AT&T. The search feature on SAMMOBILE does not have that model. Is it ok to use a different firmware? It won't be AT&T anymore if I do, right?
The back of my phone gets really hot at times, especially right while booting. I wanted to try to root and put one of the custom ROMS on there but I am not doing anything till I find the correct Stock Firmware.
Click to expand...
Click to collapse
Check out this forum, https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686. I'm running my AT&T S7 Edge on this firmware, WWWWAAAAAAYYYYYY better than stock AT&T. It has NO AT&T bloatware and it has the Mobile Data On/Off toggle listed in the quick toggles bar. Before you flash this on your phone check what build you're on in the "about phone" in settings. Here is the link with the latest stock AT&T Firmware, https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246. Download to your pc in case you want to flash back to stock. Don't root, not really stable if you do and you can't install any other firmware / ROM unless you flash 935U Firmware. You can brick your phone or even trip Knox counter and that will void your warranty if you needed to return to AT&T or Samsung.
ytaida said:
Check out this forum, https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686. I'm running my AT&T S7 Edge on this firmware, WWWWAAAAAAYYYYYY better than stock AT&T. It has NO AT&T bloatware and it has the Mobile Data On/Off toggle listed in the quick toggles bar. Before you flash this on your phone check what build you're on in the "about phone" in settings. Here is the link with the latest stock AT&T Firmware, https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246. Download to your pc in case you want to flash back to stock. Don't root, not really stable if you do and you can't install any other firmware / ROM unless you flash 935U Firmware. You can brick your phone or even trip Knox counter and that will void your warranty if you needed to return to AT&T or Samsung.
Click to expand...
Click to collapse
Hi and thanks. I don't care about warranty. I am thankful you explained that "ROOT" makes it unstable. How is it possible to flash custom ROMS without ROOT? Why is it so hard to find the dang firmware? I went back on that dang Sammobil to look for the stock firmware for a friends Verizon S7 Edge and I can't find THAT but NOW THE AT&T is there!!!!
It sounds to me like you are coming from an older phone that had an unlocked bootloader? Back in the day when flashing a new rom like paranoid or slimrom was the fun and cool way to differentiate your device from your friends. That was also a time when android was about as locked down as ios is now, and ios was still locking users into their own keyboard, and Samsung was scrapping with apple at every turn for the top seat in the mobile phone market. My how things have changed.
Android is much more open in some ways, there are far fewer things that most people need that require root access, and the device manufacturers have also begun locking down the devices much more. At least in the Samsung line, I don't know when the last US variant flagship bootloader was freely unlocked? The s3? I know I had a Verizon s6 that I could not even achieve root on following a certain point in the release cycle. Now we have all of these fun new terms like systemless root, magisk and engineering bootloader. It really comes down with what is your desired outcome from rooting. You can actually get a long way towards what you could do back then with a Samsung theme and the right apps.
I believe what ytaida is referring to is the ability to flash other s7 roms onto your phone. So while we may not be able to flash custom roms, anything with the correct bootloader can still be flashed. Typically with a phone that is only going to be in the same model, but Samsung kind of threw a curveball and created an incestual path for the s7. With their U firmware, (the 930U and 935U firmware shipped on the devices sold directly from Samsung as was mentioned above) you could flash an official version of that onto the tmobile, Verizon, att and a few other carriers hardware, and essentially change the model of the phone. From there changing it back was equally as easy, except changing it back could be changing a Verizon model into an att model. The radios were all the same. In this process a root exploit was achieved and some very smart (I am humbled by their knowledge and determination on these sites every day) folks started hacking together roms. So you will see some neat stuff done where you are never truly running as root, but there were modifications done as root somewhere along the line. Long story only mildly shorter. Be careful how far down the rabbithole you take this.
The next thing you know it could be 6am and you realize you've been downloading and archiving your own copies of stock Samsung firmware for the last 20 hours, for devices you don't even have lol..
Sure there are still custom roms out there, but as a US customer, if that is what you're looking for you are best off with a nexus device or One Plus.
scm37390 said:
Hi and thanks. I don't care about warranty. I am thankful you explained that "ROOT" makes it unstable. How is it possible to flash custom ROMS without ROOT? Why is it so hard to find the dang firmware? I went back on that dang Sammobil to look for the stock firmware for a friends Verizon S7 Edge and I can't find THAT but NOW THE AT&T is there!!!!
Click to expand...
Click to collapse
Is not hard, just need to look in correct forum. BTW what firmware you want. You can find any firmware you want for both models. Just look harder.
On Edge of Galaxy
A few things:
1) There doesn't appear to be any physical difference between the 935A, 935T, and 935U. You can, as long as you mind the bootloader version, freely switch between the three versions. I'm not sure about the Verizon and Spring versions.
2) The 935A FW link is around here. I've used it, and it worked fine, but you will be on tap for a few OTA updates.
3) The 935T FW link is actually available in several places, but there is a direct link over in the T-Mobile S7E forum. I'm not really sure what it gets you that the 935U doesn't, though. It has less bloat than AT&T, about the same amount of branding, and AT&T still refuses to let you have access to the more advanced call features. It does appear to be a lot less laggy than the 935A, though - AT&T really screwed up the Nougat upgrade compared to everyone else. It will likely get updates faster as well, and T-mobile doesn't have provisioning checks for tethering.
4) The 935U FW link is also "stock" for this phone, and works much better in many respects (it's certainly faster and less laggy) The difference between the 935A/935T and 935U firmware is that the former two have all the software needed for AT&T/T-mobile specific features, like WiFi calling, VoLTE, Visual Voicemail, etc. The latter has none of those things, but it does give you back BT tethering, disables the checks for WiFi and USB tethering, along with a few other features that were disabled.
Thus, you need to decide what is more important. Carrier specific calling features or more tethering options and overall better performance and battery life.
Please check the ORIGINAL post date!!!
I got the help I needed MONTHS ago. For those of you actually attempting to help,
"THANKS".
NORBARB, as a "SENIOR MEMBER" I would have expected much more than that and again, please look at the date I posted that question. Of course the firmware has shown up now. I don't even own that phone anymore.
How do you determine bootloader version?
jshamlet said:
A few things:
1) There doesn't appear to be any physical difference between the 935A, 935T, and 935U. You can, as long as you mind the bootloader version, freely switch between the three versions. I'm not sure about the Verizon and Spring versions.
2) The 935A FW link is around here. I've used it, and it worked fine, but you will be on tap for a few OTA updates.
3) The 935T FW link is actually available in several places, but there is a direct link over in the T-Mobile S7E forum. I'm not really sure what it gets you that the 935U doesn't, though. It has less bloat than AT&T, about the same amount of branding, and AT&T still refuses to let you have access to the more advanced call features. It does appear to be a lot less laggy than the 935A, though - AT&T really screwed up the Nougat upgrade compared to everyone else. It will likely get updates faster as well, and T-mobile doesn't have provisioning checks for tethering.
4) The 935U FW link is also "stock" for this phone, and works much better in many respects (it's certainly faster and less laggy) The difference between the 935A/935T and 935U firmware is that the former two have all the software needed for AT&T/T-mobile specific features, like WiFi calling, VoLTE, Visual Voicemail, etc. The latter has none of those things, but it does give you back BT tethering, disables the checks for WiFi and USB tethering, along with a few other features that were disabled.
Thus, you need to decide what is more important. Carrier specific calling features or more tethering options and overall better performance and battery life.
Click to expand...
Click to collapse
I'm interested in switching my unlocked Tmobile G935T to ATT G935A to take advantage of Wi-fi Calling. I'm not sure how to make sure I select the AT&T firmware that has the same bootloader as mentioned above.
Hello Everyone, Friends, Geautgrurs, Super Moderator
I'm from India
my question is a little bit same as many asked but I didn't get proper answers so I'm creating this thread if I place it wrong please correct me
I recently buy Samsung s7 from Ali express it shows unlocked G930v version
I used phone info application it shows details I uploaded here ...
I'm facing some problems like all other facings regarding updates, and the second one is Samsung pay not working I tried many time factories reset my phone and install Samsung pay again it shows please update to new version and its new version i have no idea whats happening
i want to run Samsung pay in this phone i don't know how it possible but i know you guys are great in this field you have knowledge
i never used any other century phone it's my first time. please help me in this problem how can I get android 7 nouget and Samsung pay in this phone because i bought this phone for Samsung pay
Adnightmare said:
Hello Everyone, Friends, Geautgrurs, Super Moderator
I'm from India
my question is a little bit same as many asked but I didn't get proper answers so I'm creating this thread if I place it wrong please correct me
I recently buy Samsung s7 from Ali express it shows unlocked G930v version
I used phone info application it shows details I uploaded here ...
I'm facing some problems like all other facings regarding updates, and the second one is Samsung pay not working I tried many time factories reset my phone and install Samsung pay again it shows please update to new version and its new version i have no idea whats happening
i want to run Samsung pay in this phone i don't know how it possible but i know you guys are great in this field you have knowledge
i never used any other century phone it's my first time. please help me in this problem how can I get android 7 nougats and Samsung pay in this phone because i bought this phone for Samsung pay
Click to expand...
Click to collapse
Is there some thing wrong with this post?
because im not getting any answer?
please, guys, help me if this post i wrong place let me know i will put in the right place
or if no one can solve this let me know i will stop searching for solutions
People simply might not know which is why they haven't replied. I can add my two cents but I'm not really sure.
930V is the version of the S7, a USA model. It might be that as the US model, it isn't compatible with samsung pay outside the US. It could also be that as a US model you can't get updates without being on a US carrier network.
Another possibility is that it's not an S7 at all and that it's a fake phone made to look and behave like an S7. Boot the phone into download mode, as download mode phone information can't be faked. See what it says in there.
But that's just a guess, I don't know for sure.
You can use Odin to change the firmware so long as it's a compatible stock firmware (you'd have to be looking at the Snapdragon firmware) which you can find at sammobile.com
Beanvee7 said:
People simply might not know which is why they haven't replied. I can add my two cents but I'm not really sure.
930V is the version of the S7, a USA model. It might be that as the US model, it isn't compatible with samsung pay outside the US. It could also be that as a US model you can't get updates without being on a US carrier network.
Another possibility is that it's not an S7 at all and that it's a fake phone made to look and behave like an S7. Boot the phone into download mode, as download mode phone information can't be faked. See what it says in there.
But that's just a guess, I don't know for sure.
You can use Odin to change the firmware so long as it's a compatible stock firmware (you'd have to be looking at the Snapdragon firmware) which you can find at sammobile.com
Click to expand...
Click to collapse
its not face it tried g930u rom installed every thing good but little bit network problem network weak and Samsung pay is international not India version
Samsung pay may be an international service, but to work it still requires collaboration between telcos and samsung.
You have a US model phone that is not officially supported outside of the US, and is not officially supports by Indian telcos. That is probably why it won't work. Whatever Samsung and Indian telcos put in place to support Samsung pay likely doesn't include US model phones being used outside the US, with a non-US SIM.
The 930V also uses a different modem to the international 930F variant, which means you won't be connecting to all the same network bands as the 930F variant, which will affect your network speed and potentially any telco services such as VoLTE and Samsung pay.
There is a reason 930V's sell for cheaper than the international 930F variant.
so there is no solution for this phone
I have a AUS version of S7 and I can confirm that I am able to use it in India for Samsung Pay
Why dont you manually update it to Android 7. This will have latest Samsung Pay installed and you should be able to use it in India
Please head to Sammobile and search firmware for SM-G930V
Australia and India both use the international variant G930F, so I'd expect it to work.
Beanvee7 said:
Australia and India both use the international variant G930F, so I'd expect it to work.
Click to expand...
Click to collapse
Hello
I installed G930U its fine Samsung pay working on SBI cards I don't know it works with other cards
only one issue is Volte I don't get volte for JIO actually I'm not using Jio but I want INS CSC
can you tell me it possible to install INS CSC
I rooted this phone and flashed INS CSC and its work :good: but when unrooted or back to stock FW INS CSC gone :crying:
so there is a way to add INS CSC in this FW CSC file because it has multiple CSC like XAA and others can we add INS CSC in these multiple stock CSC anyhow?
Adnightmare said:
Hello Everyone, Friends, Geautgrurs, Super Moderator
I'm from India
my question is a little bit same as many asked but I didn't get proper answers so I'm creating this thread if I place it wrong please correct me
I recently buy Samsung s7 from Ali express it shows unlocked G930v version
I used phone info application it shows details I uploaded here ...
I'm facing some problems like all other facings regarding updates, and the second one is Samsung pay not working I tried many time factories reset my phone and install Samsung pay again it shows please update to new version and its new version i have no idea whats happening
i want to run Samsung pay in this phone i don't know how it possible but i know you guys are great in this field you have knowledge
i never used any other century phone it's my first time. please help me in this problem how can I get android 7 nouget and Samsung pay in this phone because i bought this phone for Samsung pay
Click to expand...
Click to collapse
Oh well, did you hard reset it via Odin? You've to flash manually a fw, so you'll have a clean base
zSyntex said:
Oh well, did you hard reset it via Odin? You've to flash manually a fw, so you'll have a clean base
Click to expand...
Click to collapse
i update my phone to G930u nougat 7 with the help of Odin and i flashed all four files BL AP C CSC now i can use Samsung Pay. not Indian Volte, actually i don't know about Clean base whats it called
Hey there, hope y'all are doing well.
I recently purchased a Samsung Galaxy S7 SM-G930V, Nougat 7.0 (note: I live in europe, and it's an unlocked phone). I want to get rid of Verizon logo while booting and all the unnecessary apps connected with Verizon. Plus, as you know Verizon locks some functions like the device maintenance, turning off the backlight of the capacitive buttons, etc, etc.
So, I'd like to have a clean/untouched samsung firmware without any useless apps.
Is androidfilehost.com trustworthy? what about updato.com? (the latter had slow dl speed, and I stumbled upon the first alternative)
PS. by the way, mine reads G930VVRS4BQI1, so one thing that confused me was while loking up for files to download; should I get the G930VVRS4BQI1 which may be the only compatible file for my phone, or do I already have G930VVRS4BQI1, so downloading it would be useless?
Since I wouldn't like to tinker often with the phone system, what do you suggest, flashing or rooting?
Is there any guide for my case for flashing?
I noticed these two on the front page:
---[Rom] [Ufirm_QD2_Hybrid_Nougat_Rom_FlashFire_Install][Status Official For VZW S7FLAT]Last edited by CVertigo1; 25th September 2017
---[Rom] [Verizon_TMO_Hybrid_Nougat_Rom_FlashFire_Install][Status Official] [S7flat]Last edited by CVertigo1; 26th May 2017 at 03:13 PM.
which should I pick?
and since the posts were last edited in may and september, where can I find the latest firmware?
and after doing all this, will everything work well, will I get OTA updates?
I would really appreciate someone helping me out, whenever you're free.
Thanks in advance
You can actually cross flash any Qualcomm s7 firmware between all carrier handsets. With your case being in Europe I would recommend the sm-G930U firmware. Which is the carrier unlocked variant of the S7 stateside that has all bands unlocked that the modem is capable of. You will recieve OTA's. It's Odin files are on Updato and SamMobile. AndroidHost is trustworthy.
In your case of not wanting to tinker or have a "need to have" rooted feature on the new device, I would flash the the 930U firmware and enjoy your new non branded system.
JediDru said:
You can actually cross flash any Qualcomm s7 firmware between all carrier handsets. With your case being in Europe I would recommend the sm-G930U firmware. Which is the carrier unlocked variant of the S7 stateside that has all bands unlocked that the modem is capable of. You will recieve OTA's. It's Odin files are on Updato and SamMobile. AndroidHost is trustworthy.
In your case of not wanting to tinker or have a "need to have" rooted feature on the new device, I would flash the the 930U firmware and enjoy your new non branded system.
Click to expand...
Click to collapse
Hey JediDru,
I also just bought the S7 Verizon variant, and am planning on using it on MetroPCS. Would you recommend the 930U firmware for me as well? I wouldn't mind getting rid of the Verizon bloat before I hand it over to my wife...
jbjcurly said:
Hey JediDru,
I also just bought the S7 Verizon variant, and am planning on using it on MetroPCS. Would you recommend the 930U firmware for me as well? I wouldn't mind getting rid of the Verizon bloat before I hand it over to my wife...
Click to expand...
Click to collapse
You very well could. I think there is a thread around here specifically about metropcs setup somewhere between the verizon s7 and tmobile s7 forums. I use my 930v flashed to 930U on tmobile.
JediDru said:
You can actually cross flash any Qualcomm s7 firmware between all carrier handsets. With your case being in Europe I would recommend the sm-G930U firmware. Which is the carrier unlocked variant of the S7 stateside that has all bands unlocked that the modem is capable of. You will recieve OTA's. It's Odin files are on Updato and SamMobile. AndroidHost is trustworthy.
In your case of not wanting to tinker or have a "need to have" rooted feature on the new device, I would flash the the 930U firmware and enjoy your new non branded system.
Click to expand...
Click to collapse
hey there, thanks for your advice! I downloaded the latest file from here. sammobile"dot"com/firmwares/galaxy-s7/SM-G930U/VZW/
In a moment I was clueless at the "pick country" since there were more than one USA options. so I went with verizon, since my phone comes from verizon.
In the link I mentioned above it reads this This is for SM-G930U from USA (Verizon) which makes no sense to me, how it can be both "U"-unlocked and verizon at the same time... but, oh well, I flashed it 4 days ago and I've encountered no problem, which is all that matters! Hope I made no mistake at picking that file.
Recently purchased galaxy S7 SMG-930V (Best buy version) from a private owner.
I am on cricket and on APN setup LTE and MMS works without issues. Only issue is that upon dialing USSD code i get 'Connection problem or Invalid MMI code' . I tried all options available mentioned in this forum still doesn't work. Which version of SM-G930U should i flash? Main reason i purchased the phone is for Samusing Pay. Don't want to brick or lose Samusing Pay option after flash.
Inputs are appreciated.
thricegreat said:
hey there, thanks for your advice! I downloaded the latest file from here. sammobile"dot"com/firmwares/galaxy-s7/SM-G930U/VZW/
In a moment I was clueless at the "pick country" since there were more than one USA options. so I went with verizon, since my phone comes from verizon.
In the link I mentioned above it reads this This is for SM-G930U from USA (Verizon) which makes no sense to me, how it can be both "U"-unlocked and verizon at the same time... but, oh well, I flashed it 4 days ago and I've encountered no problem, which is all that matters! Hope I made no mistake at picking that file.
Click to expand...
Click to collapse
Did it remove all the bloatware from Verizon?
Does Samsung pay works?
matrixddl said:
Did it remove all the bloatware from Verizon?
Does Samsung pay works?
Click to expand...
Click to collapse
Yes Flashing the G930U firmware removes all carrier bloat.
Samsung pay comes with the U firmware.
The last time I was on the U I had bad standby drain. I read somewhere else it has to do with the U not dozing correctly. They may very well have fixed it now, I'm on the latest tmobile 4BRA firmware and it sleeps like a baby right now.
JediDru said:
Yes Flashing the G930U firmware removes all carrier bloat.
Samsung pay comes with the U firmware.
The last time I was on the U I had bad standby drain. I read somewhere else it has to do with the U not dozing correctly. They may very well have fixed it now, I'm on the latest tmobile 4BRA firmware and it sleeps like a baby right now.
Click to expand...
Click to collapse
Flashed the verizon U firmware and it did remove all the bloatware. Still need to check on battery drain with Samsung Pay. All other apps are in "Always Sleeping Apps" for better battery performance.
For future reference make sure before flashing new firmware google accounts and lock screen securities are removed/disabled.
Is there a way to back up apps with user data and home screen and reuse instead of installing all over again when a new firmaware is flashed. Spoiled by the root and titanium full back. That was so easy.
matrixddl said:
Flashed the verizon U firmware and it did remove all the bloatware. Still need to check on battery drain with Samsung Pay. All other apps are in "Always Sleeping Apps" for better battery performance.
For future reference make sure before flashing new firmware google accounts and lock screen securities are removed/disabled.
Is there a way to back up apps with user data and home screen and reuse instead of installing all over again when a new firmaware is flashed. Spoiled by the root and titanium full back. That was so easy.
Click to expand...
Click to collapse
As far as I know, no. It's not so bad. I had gotten into the habit of taking screen shots of my app drawer and redownloading. To think now I can just redownload the configuration of apps I had before is as good as it gets. I still just redownload. I like to re-set everything back up just so I know its done.
I haven't tried this method but to backup and restore all installed apps check this Link.
matrixddl said:
I haven't tried this method but to backup and restore all installed apps check this Link.
Click to expand...
Click to collapse
Actually, if all you want to do is switch carriers (same GMail address), then a firmware swap will work.
I have an ex-Verizon (blacklisted IMEI - previous owner)S7 that I was moving to Tracfone (which uses both VZW and T-Mobile towers) - naturally, VZW was a non-starter; however, the UnCarrier was fine, so I used a T-Mobile nanoSIM (Tracfone triple-punch SIM kit includes SIMs from all except Sprint) and replaced the VZW firmware with T-M firmware (Prince Comsy ODIN does the track rather neatly). As long as your IMEI is not blacklisted from the TARGET, such a swap will always work.
I have yet to find a simple guide on "How to load a custom ROM on your AT&T S7 Edge"
I've traveled all over the interwebs, including this website and many others but have not found a simple guide for noobs. I read about CWM, TWRP, Odin, rooting, zip files, tar files, nandroid, backup ROM, root with app, root via computer, blah, blah, blah, blah....
All I know is that before I do anything I want to backup the stock ROM but before that I'm thrown all kinds of different tools and processes that one could use. For the noob it should be as simple as:
Step 1: backup your stock ROM and to do this download/install this tool then follow these instructions.
Step 2: root your S7 Edge and to do this download/install this tool then follow these instructions.
Step 3: find a custom ROM you want to install and to do this go here, here or here for you model and download it to your PC.
Step 4: flash your custom ROM and to do this down/install this tool and follow these instructions.
Maybe I haven't done a good job of searching so shame on me but I don't feel like given the effort I've expended thus far has yielded a straight and easy answer when it probably should be. I seem to run across a lot of promising reads/threads about this only to find that there seems to be so much more knowledge and experience with the SM-935F and not so much with the SM-935A variant. On top of it, it would seem that I'm told that rooting will or will not break Samsung Pay and other apps/features or that the flag will or will not permanently trip that shows the device has been modified. Very confusing.
When I'm presented with a tar/zip download I'm not sure to where I'm supposed to be downloading. To my PC then used Odin s/w on the PC to install via USB cable to the handset?
Can someone please point me to the simple guide to get this going...or am I gonna have to write it myself? TIA.
BTW, I should note that I'm coming from a S3 on Virgin Mobile to a S7 Edge SM-G935A to be used on Cricket Wireless (AT&T). Since I'll be on Cricket and not directly a AT&T customer per se I'd like to get rid of all the bloatware that AT&T was so kind to load up on the handset. Right now it has Nougat 7.0 installed: samsung/hero2qlteuc/hero2qlteatt:7.0/NRD90M/G935AUCU4BQA6
I am not sure if you have a US version the S7 (Qualcomm G935A) or the S7 non US version. But if you have the US version, we are out of luck. Our bootloader is completely locked and all those steps you pointed out are not available.
Sent from my SAMSUNG-SM-G935A using Tapatalk
freeop said:
I am not sure if you have a US version the S7 (Qualcomm G935A) or the S7 non US version. But if you have the US version, we are out of luck. Our bootloader is completely locked and all those steps you pointed out are not available.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
So it seems that with all USA Qualcomm versions regardless of GSM carrier you have confirmed we pretty much cannot do much other than load some other versions of firmware such the U version ROM? From what I read HERE this is the Marshmallow 6.0 o/s. I currently have the stock Nougat 7.0 firmware from AT&T on my S7 Edge. Is there a debloated 7.0 version of the U ROM available?
UPDATE: Never mind...I came across THIS THREAD regarding an unbloated 7.0 U-version. I see you were active in that thread so now I need to read the entire thing before I have more questions and if so I'll ask them there. Thanks!
SyberTiger said:
So it seems that with all USA Qualcomm versions regardless of GSM carrier you have confirmed we pretty much cannot do much other than load some other versions of firmware such the U version ROM? From what I read HERE this is the Marshmallow 6.0 o/s. I currently have the stock Nougat 7.0 firmware from AT&T on my S7 Edge. Is there a debloated 7.0 version of the U ROM available?
UPDATE: Never mind...I came across THIS THREAD regarding an unbloated 7.0 U-version. I see you were active in that thread so now I need to read the entire thing before I have more questions and if so I'll ask them there. Thanks!
Click to expand...
Click to collapse
If you still want to root your phone, you can follow this link and will let you get rid of all the bloat and root your phone, install xposed and all the mods for xposed. I have used the ENG.IMG version of root for the G935A over 6 months ago and it works great, given the choices we have.
Here's the link: https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
I know the thread is in the T-Mobile section but if you read the first line, it says it works for T-Mobile, ATT, Sprint, Verizon, etc. It is a very long thread but if you read mostly the later posts from @Craz Basics and you will be able to see that it works really nice.
Good luck
freeop said:
If you still want to root your phone, you can follow this link and will let you get rid of all the bloat and root your phone, install xposed and all the mods for xposed. I have used the ENG.IMG version of root for the G935A over 6 months ago and it works great, given the choices we have.
Here's the link: https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
I know the thread is in the T-Mobile section but if you read the first line, it says it works for T-Mobile, ATT, Sprint, Verizon, etc. It is a very long thread but if you read mostly the later posts from @Craz Basics and you will be able to see that it works really nice.
Good luck
Click to expand...
Click to collapse
Hey thanks....but I have another question now that I'm given choices.
Which ROM is better, the U 7.0 ROM or the T-Mobile ROM you just linked? And, why is it better than the other?
SyberTiger said:
Hey thanks....but I have another question now that I'm given choices.
Which ROM is better, the U 7.0 ROM or the T-Mobile ROM you just linked? And, why is it better than the other?
Click to expand...
Click to collapse
Ok the U 7.0 ROM is still un-rooted and bootloader locked. If you go that way, you get the U ROM with-out all the Bloat. But nothing more.
And the link is not really for the T-Mobile phone only. The ENG.IMG is for all makes of the Qualcomm chip. You install that and you are still with ATT. Still have all the things ATT provides like WiFi-Calling and other ATT things. And you can get rid of the Bloatware from the ATT ROM using different apps, like Titanium Backup. With the ENG.IMG you can root your phone and use all the apps that are available for Rooted Phones. One of the best is Titanium Backup. You can only use that one Rooted phones. If you have the U 7.0 ROM, you will have to use the same ENG.IMG to Root the U 7.0 ROM to get that OS rooted. And as I mentioned before you can use Xposed with the rooted phone.
If you are just looking to get rid of Bloatware on the ATT, there is an app for that also. Check out BK Disabler in the playstore. You can get rid of all the bloatware without rooting your phone.
Anyway, hope this make some kind of sense...
freeop said:
Ok the U 7.0 ROM is still un-rooted and bootloader locked. If you go that way, you get the U ROM with-out all the Bloat. But nothing more.
And the link is not really for the T-Mobile phone only. The ENG.IMG is for all makes of the Qualcomm chip. You install that and you are still with ATT. Still have all the things ATT provides like WiFi-Calling and other ATT things. And you can get rid of the Bloatware from the ATT ROM using different apps, like Titanium Backup. With the ENG.IMG you can root your phone and use all the apps that are available for Rooted Phones. One of the best is Titanium Backup. You can only use that one Rooted phones. If you have the U 7.0 ROM, you will have to use the same ENG.IMG to Root the U 7.0 ROM to get that OS rooted. And as I mentioned before you can use Xposed with the rooted phone.
If you are just looking to get rid of Bloatware on the ATT, there is an app for that also. Check out BK Disabler in the playstore. You can get rid of all the bloatware without rooting your phone.
Anyway, hope this make some kind of sense...
Click to expand...
Click to collapse
Thanks, appreciate it.
I'm really not planning on spending a lot of time making changes or tweaking the handset. I'm on Cricket Wireless therefore I don't see any value in the AT&T bloatware which is why I wanted it removed. My interest is primarily having the latest/greatest android version I can have without all the stuff junking it up. I'd like it to be as fast as is reasonably possibly but at the same time have reasonably good battery life. I'm coming from a Galaxy S3 on Virgin Mobile so the change to the S7E is a huge upgrade. I haven't figured out yet if there are any apps (that require rooting) that are so slick I can't live without them.
I installed the U 7.0 and as I recall I got about 5 or 6 OTA updates which in encouraging. I think the AT&T ROM never received any of the 3 or 4 most current security updates. Anyhow, U 7.0 is up and running with no AT&T bloatware.
SyberTiger said:
Thanks, appreciate it.
I'm really not planning on spending a lot of time making changes or tweaking the handset. I'm on Cricket Wireless therefore I don't see any value in the AT&T bloatware which is why I wanted it removed. My interest is primarily having the latest/greatest android version I can have without all the stuff junking it up. I'd like it to be as fast as is reasonably possibly but at the same time have reasonably good battery life. I'm coming from a Galaxy S3 on Virgin Mobile so the change to the S7E is a huge upgrade. I haven't figured out yet if there are any apps (that require rooting) that are so slick I can't live without them.
I installed the U 7.0 and as I recall I got about 5 or 6 OTA updates which in encouraging. I think the AT&T ROM never received any of the 3 or 4 most current security updates. Anyhow, U 7.0 is up and running with no AT&T bloatware.
Click to expand...
Click to collapse
AT&T's software updater only works if you have an AT&T SIM card. This is why the first thing you should do if you buy an AT&T (or other carrier) device that you don't plan to use on that network is to convert it to the unlocked version. That, and AT&T (in particular) loads the crap out of their devices with bloatware to the point that switching to U feels like an early upgrade to the next generation device.
jshamlet said:
AT&T's software updater only works if you have an AT&T SIM card. This is why the first thing you should do if you buy an AT&T (or other carrier) device that you don't plan to use on that network is to convert it to the unlocked version. That, and AT&T (in particular) loads the crap out of their devices with bloatware to the point that switching to U feels like an early upgrade to the next generation device.
Click to expand...
Click to collapse
Yeah, I have a Cricket SIM which explains why this unlocked handset is stuck on 7.0 G935AUCU4BQA6 which is the February 1, 2017 update. Interestingly enough, the Network Signal Info app shows the SIM Operator as AT&T and Network Operator as Cricket/AT&T.
Going to the U got rid of all the bloatware and the handset immediately started receiving 5 or 6 OTA updates. I'll probably stick with the U version unless it becomes apparent there's a significantly better ROM available that increases performance, battery life or really adds some whizbangs that make the S7E experience a lot better.
forgive me for butting in -- I have a SM-G935A (stock) on Cricket as well.
Updates to the ROM and while keeping Samsung Pay are important to me.
In the past, I have d/led ATT updates and installed them using Odin, but that wipes my phone's apps/settings each time. Recently, I purchased an ATT sim & put the minimum $$$ on it with the intention of popping it in for OTA's. I've received BQK2, Nov 1 2017. It's a crappy work around, but the easiest I know of without having to rebuild my phone each Odin'ed update.
Would installing U or TMO firmware on the 935A remove the ability to use Samsung Pay? Would either of them be updated for frequently/easier than the 935A?
The U firmware supports Samsung pay and gets updates directly. The only downsides are no carrier features like wifi calling, etc., and if gets updates later than the carrier versions. I have run it on AT&T since I got the phone and it has worked fine.
jshamlet said:
The U firmware supports Samsung pay and gets updates directly. The only downsides are no carrier features like wifi calling, etc., and if gets updates later than the carrier versions. I have run it on AT&T since I got the phone and it has worked fine.
Click to expand...
Click to collapse
Thanks, jshamlet.
This is my first phone I haven't rooted & I feel a bit powerless without Xposed and Titanium Backup. I find myself using Samsung Pay so often, that I don't want to lose it & was concerned that installing the U (or TMO) firmware on the ATT version would trip Knox, too.
William Thornton said:
forgive me for butting in -- I have a SM-G935A (stock) on Cricket as well.
Updates to the ROM and while keeping Samsung Pay are important to me.
In the past, I have d/led ATT updates and installed them using Odin, but that wipes my phone's apps/settings each time. Recently, I purchased an ATT sim & put the minimum $$$ on it with the intention of popping it in for OTA's. I've received BQK2, Nov 1 2017. It's a crappy work around, but the easiest I know of without having to rebuild my phone each Odin'ed update.
Would installing U or TMO firmware on the 935A remove the ability to use Samsung Pay? Would either of them be updated for frequently/easier than the 935A?
Click to expand...
Click to collapse
Hmm, doesn't Samsung Smart Switch back up everything?
SyberTiger said:
Hmm, doesn't Samsung Smart Switch back up everything?
Click to expand...
Click to collapse
I've never gotten it working 100%.
William Thornton said:
I've never gotten it working 100%.
Click to expand...
Click to collapse
I'd be talking about the PC version not the phone-to-phone setup. Back up to PC then from PC to your phone. Worked great for me.
SyberTiger said:
Hmm, doesn't Samsung Smart Switch back up everything?
Click to expand...
Click to collapse
Um, no. No it doesn't. Helium (or if you are feeling oldster, ADB) does a vastly better job of backing up apps than Smart Switch. Smart Switch does a reasonably good job of putting your phone's settings back, but it doesn't appear to back up most app data.
I learned this the hard way.
---------- Post added at 01:51 AM ---------- Previous post was at 01:47 AM ----------
William Thornton said:
Thanks, jshamlet.
This is my first phone I haven't rooted & I feel a bit powerless without Xposed and Titanium Backup. I find myself using Samsung Pay so often, that I don't want to lose it & was concerned that installing the U (or TMO) firmware on the ATT version would trip Knox, too.
Click to expand...
Click to collapse
Samsung Pay, with the MST technology, is one of those weirdly underrated features that continually amaze people. It works nearly anywhere you can physically see the mag stripe reader, which instantly makes it vastly more useful than either Apple Pay or Android Pay. I have had more than a few people say "We don't take Apple Pay", and then drop their jaw when the transaction goes through.
The fact that Samsung doesn't make a bigger deal about it is strange, because it really is one of those technologies that sets them apart from the other two.